pulseaudio 1:8.0-0ubuntu1 source package in Ubuntu
Changelog
pulseaudio (1:8.0-0ubuntu1) xenial; urgency=medium * New upstream release * Merge from Debian experimental, remaining changes: - epoch (my stupid fault :S) - Don't ship the consolekit module, and explicitly depend on the PAM systemd module - Add a module to allow pulseaudio to use the Android audio HAL - Adjust gbp.conf file to point to the ubuntu branch for package builds - Disable module-role-cork by default - Load module-x11-bell in the start-pulseaudio-x11 script - Hide pulseaudio from startup apps dialog - Quit daemon if pid file is removed - Avoid abort when poll descriptor is 0, such as when using it with the audioflinger bridge, like done in ubuntu touch - change default rlimit_rttime value to 200 ms - Don't probe UCM profiles, trust that the profile writer knows what they are doing - Add card hook to allow modules to do something before a profile becomes active - Add an option to the bluez4 discovery module to set the profile - Allow leaving bluetooth transport running while sink and source are suspended. - Add option to module-switch-on-connect to skip abstract devices - Add property to module-device-restore to skip store/restore - Add missing fields for sink_input/source_output info struct to the vala bindings - Add example upstart job to run pulseaudio in system mode - Add a build/run autopkgtest for libpulse-dev - Drop libsoxr-dev build dep, its in universe * Refreshed patches, and dropped those that were applied upstream. * Update local shlibs file for 8.0 pulseaudio (7.99.2-1) experimental; urgency=medium * New upstream release candidate * Drop build-sys-Fix-install-order-of-libpulsecore.patch, applied upstream pulseaudio (7.99.1-1) experimental; urgency=medium * New upstream release candidate - Update local shlibs file for 7.99 - libpulsecore is now installed in the package-private directory - Update symbols file to add new balance functions * Drop pulsecore related lintian overrides * Drop stale pulseaudio-dev.install file * Drop stale lintian overrides * Add patch to fix install order of libpulsecore pulseaudio (7.1-2) unstable; urgency=medium * Add build-depends on libsoxr-dev to enable soxr resamplers. Closes: #804212 -- Luke Yelavich <email address hidden> Wed, 10 Feb 2016 16:27:28 +1100
Upload details
- Uploaded by:
- Luke Yelavich
- Uploaded to:
- Xenial
- Original maintainer:
- Ubuntu Developers
- Architectures:
- any
- Section:
- sound
- Urgency:
- Medium Urgency
See full publishing history Publishing
Series | Published | Component | Section |
---|
Downloads
File | Size | SHA-256 Checksum |
---|---|---|
pulseaudio_8.0.orig.tar.xz | 1.4 MiB | 690eefe28633466cfd1ab9d85ebfa9376f6b622deec6bfee5091ac9737cd1989 |
pulseaudio_8.0-0ubuntu1.debian.tar.xz | 134.6 KiB | 11ac404e2a81dd98aa1c33630a4c88f69b9a261cff31352ab5479e3ec32be232 |
pulseaudio_8.0-0ubuntu1.dsc | 3.5 KiB | a5f504774df97460558258a17bdc236136bbb972009e393e37999623a16e657c |
Available diffs
- diff from 1:7.1-1ubuntu7 to 1:8.0-0ubuntu1 (96.6 KiB)
Binary packages built by this source
- libpulse-dev: PulseAudio client development headers and libraries
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
Headers and libraries for developing applications that access a PulseAudio
sound server via PulseAudio's native interface.
- libpulse-mainloop-glib0: PulseAudio client libraries (glib support)
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
Client libraries used by applications that access a PulseAudio sound server
via PulseAudio's native interface.
.
This package adds support for glib2 client applications.
- libpulse-mainloop-glib0-dbgsym: debug symbols for package libpulse-mainloop-glib0
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
Client libraries used by applications that access a PulseAudio sound server
via PulseAudio's native interface.
.
This package adds support for glib2 client applications.
- libpulse0: PulseAudio client libraries
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
Client libraries used by applications that access a PulseAudio sound server
via PulseAudio's native interface.
- libpulse0-dbgsym: debug symbols for package libpulse0
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
Client libraries used by applications that access a PulseAudio sound server
via PulseAudio's native interface.
- libpulsedsp: PulseAudio OSS pre-load library
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package provides the pre-load library used to redirect applications
using OSS through pulseaudio.
- libpulsedsp-dbgsym: debug symbols for package libpulsedsp
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package provides the pre-load library used to redirect applications
using OSS through pulseaudio.
- pulseaudio: PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
These are some of PulseAudio's features:
.
* High quality software mixing of multiple audio streams with support for
more than one sink/source. May be used to combine multiple sound cards
into one (with sample rate adjustment).
.
* Wide range of supported client libraries. ESD, ALSA, oss, libao and
GStreamer client applications are supported as-is. Native PulseAudio
plug-ins are also available for xmms and mplayer.
.
* Good low latency behaviour and very accurate latency measurement for
playback and recording. Ability to fully synchronize multiple playback
streams.
.
* Network transparency, allowing an application to play back or record
audio on a different machine than the one it is running on.
.
* Extensible plug-in architecture with plug-ins for jackd, multicast-rtp
lirc and avahi, just to name a few.
.
This package contains the daemon and basic module set.
- pulseaudio-dbgsym: debug symbols for package pulseaudio
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
These are some of PulseAudio's features:
.
* High quality software mixing of multiple audio streams with support for
more than one sink/source. May be used to combine multiple sound cards
into one (with sample rate adjustment).
.
* Wide range of supported client libraries. ESD, ALSA, oss, libao and
GStreamer client applications are supported as-is. Native PulseAudio
plug-ins are also available for xmms and mplayer.
.
* Good low latency behaviour and very accurate latency measurement for
playback and recording. Ability to fully synchronize multiple playback
streams.
.
* Network transparency, allowing an application to play back or record
audio on a different machine than the one it is running on.
.
* Extensible plug-in architecture with plug-ins for jackd, multicast-rtp
lirc and avahi, just to name a few.
.
This package contains the daemon and basic module set.
- pulseaudio-esound-compat: PulseAudio ESD compatibility layer
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains the ESD compatibility components used by some
older versions of complete desktop environments, e.g., GNOME, and
many useful applications. It enables a PulseAudio sound server to
fully replace ESD.
- pulseaudio-esound-compat-dbgsym: debug symbols for package pulseaudio-esound-compat
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains the ESD compatibility components used by some
older versions of complete desktop environments, e.g., GNOME, and
many useful applications. It enables a PulseAudio sound server to
fully replace ESD.
- pulseaudio-module-bluetooth: Bluetooth module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to work with bluetooth devices, like headset
or audio gateway.
.
The module is called module-bluetooth
- pulseaudio-module-bluetooth-dbgsym: debug symbols for package pulseaudio-module-bluetooth
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to work with bluetooth devices, like headset
or audio gateway.
.
The module is called module-bluetooth
- pulseaudio-module-droid: Android Audio HAL module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to work on top of the Android Audio HAL.
.
The module is called module-droid.
- pulseaudio-module-droid-dbgsym: debug symbols for package pulseaudio-module-droid
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to work on top of the Android Audio HAL.
.
The module is called module-droid.
- pulseaudio-module-gconf: GConf module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to store additional configuration in GConf.
.
The module is called module-gconf.
- pulseaudio-module-gconf-dbgsym: debug symbols for package pulseaudio-module-gconf
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to store additional configuration in GConf.
.
The module is called module-gconf.
- pulseaudio-module-jack: jackd modules for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
These modules enables PulseAudio to connect to a jackd daemon.
.
The modules are called module-jack-sink, module-jack-source.
- pulseaudio-module-jack-dbgsym: debug symbols for package pulseaudio-module-jack
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
These modules enables PulseAudio to connect to a jackd daemon.
.
The modules are called module-jack-sink, module-jack-source.
- pulseaudio-module-lirc: lirc module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables the volume of a PulseAudio sink to be controlled when
buttons of an infrared remote control are pressed (through LIRC).
.
The module is called module-lirc.
- pulseaudio-module-lirc-dbgsym: debug symbols for package pulseaudio-module-lirc
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables the volume of a PulseAudio sink to be controlled when
buttons of an infrared remote control are pressed (through LIRC).
.
The module is called module-lirc.
- pulseaudio-module-raop: RAOP module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to stream audio to an Apple Airport Express.
- pulseaudio-module-raop-dbgsym: debug symbols for package pulseaudio-module-raop
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to stream audio to an Apple Airport Express.
- pulseaudio-module-trust-store: trust-store module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to use the trust-store in Ubuntu touch systems.
.
The module is called module-trust-store.
- pulseaudio-module-trust-store-dbgsym: debug symbols for package pulseaudio-module-trust-store
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to use the trust-store in Ubuntu touch systems.
.
The module is called module-trust-store.
- pulseaudio-module-x11: X11 module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to publish itself as the default sound
server to the X11 root window automatically upon startup. There is also a
module to playback a sound file in place of the X11 bell beep.
.
The modules are called module-x11-publish and module-x11-bell.
- pulseaudio-module-x11-dbgsym: debug symbols for package pulseaudio-module-x11
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to publish itself as the default sound
server to the X11 root window automatically upon startup. There is also a
module to playback a sound file in place of the X11 bell beep.
.
The modules are called module-x11-publish and module-x11-bell.
- pulseaudio-module-zeroconf: Zeroconf module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to publish available sinks and sources via
zeroconf (aka. Avahi, mdns).
.
The module is called module-zeroconf- publish.
- pulseaudio-module-zeroconf-dbgsym: debug symbols for package pulseaudio-module-zeroconf
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to publish available sinks and sources via
zeroconf (aka. Avahi, mdns).
.
The module is called module-zeroconf- publish.
- pulseaudio-utils: Command line tools for the PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
These tools provide command line access to various features of the
PulseAudio sound server. Included tools are:
.
paplay - Playback a WAV file via a PulseAudio sink.
pacat - Cat raw audio data to a PulseAudio sink.
parec - Cat raw audio data from a PulseAudio source.
pacmd - Connect to PulseAudio's built-in command line control interface.
pactl - Send a control command to a PulseAudio server.
padsp - /dev/dsp wrapper to transparently support OSS applications.
pax11publish - Store/retrieve PulseAudio default server/sink/source
settings in the X11 root window.
- pulseaudio-utils-dbgsym: debug symbols for package pulseaudio-utils
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
These tools provide command line access to various features of the
PulseAudio sound server. Included tools are:
.
paplay - Playback a WAV file via a PulseAudio sink.
pacat - Cat raw audio data to a PulseAudio sink.
parec - Cat raw audio data from a PulseAudio source.
pacmd - Connect to PulseAudio's built-in command line control interface.
pactl - Send a control command to a PulseAudio server.
padsp - /dev/dsp wrapper to transparently support OSS applications.
pax11publish - Store/retrieve PulseAudio default server/sink/source
settings in the X11 root window.