pulseaudio 1:1.1-0ubuntu13 source package in Ubuntu
Changelog
pulseaudio (1:1.1-0ubuntu13) precise; urgency=low * 0020-daemon-Initialize-dbus-to-use-thread-safe-mode-by-de.patch: Make sure dbus is thread safe to avoid crashes in pa_make_realtime (LP: #937933) * 0111-protocol-native-Protect-against-clients-trying-to-se.patch: Don't crash if clients try to set a NULL port (LP: #951273) * 0021-Fix-input-device-for-M-audio-fasttrack-pro.patch: Probe two different input devices (LP: #569932) * 0112-module-loopback-Never-call-adjust_rates-after-teardo.patch: Don't crash on shutdown in module-loopback (LP: #946400) * 0619-module-switch-on-port-available-Do-not-switch-profil.patch: Prevent switching to HDMI profiles from analog profiles, as a result of discussion on the pulseaudio-discuss and ubuntu-audio-dev mailinglist. -- David Henningsson <email address hidden> Wed, 21 Mar 2012 10:47:33 +0100
Upload details
- Uploaded by:
- David Henningsson
- Sponsored by:
- Luke Yelavich
- Uploaded to:
- Precise
- Original maintainer:
- Ubuntu Developers
- Architectures:
- any
- Section:
- sound
- Urgency:
- Low Urgency
See full publishing history Publishing
Series | Published | Component | Section |
---|
Downloads
File | Size | SHA-256 Checksum |
---|---|---|
pulseaudio_1.1.orig.tar.gz | 2.1 MiB | 9b480bbb8c33feffeca7343fe56bf972d47b988d5c6e20b28eb742186b0bfc47 |
pulseaudio_1.1-0ubuntu13.diff.gz | 115.3 KiB | ebdad7e13433c8791d696b5c4a443bd2883d0b3eac7d03b211b606d008c9d97d |
pulseaudio_1.1-0ubuntu13.dsc | 3.7 KiB | 1321147311499b9380bdc2c4a9841ab0a6311062a3a905bcae9afa7c253530c6 |
Available diffs
Binary packages built by this source
- libpulse-dev: PulseAudio client development headers and libraries
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
Headers and libraries for developing applications that access a PulseAudio
sound server via PulseAudio's native interface.
- libpulse-mainloop-glib0: PulseAudio client libraries (glib support)
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
Client libraries used by applications that access a PulseAudio sound server
via PulseAudio's native interface.
.
This package adds support for glib2 client applications.
- libpulse-mainloop-glib0-dbg: PulseAudio client libraries (glib support) debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains detached debugging symbols for the PulseAudio native
interface glib support client libraries.
- libpulse0: PulseAudio client libraries
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
Client libraries used by applications that access a PulseAudio sound server
via PulseAudio's native interface.
- libpulse0-dbg: PulseAudio client libraries detached debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains detached debugging symbols for the PulseAudio native
interface client libraries.
- libpulsedsp: PulseAudio OSS pre-load library
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package provides the pre-load library used to redirect applications
using OSS through pulseaudio.
- libpulsedsp-dbg: PulseAudio OSS pre-load library detatched debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains detatched debugging symbols for the OSS pre-load
library.
- pulseaudio: PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
These are some of PulseAudio's features:
.
* High quality software mixing of multiple audio streams with support for
more than one sink/source. May be used to combine multiple sound cards
into one (with sample rate adjustment).
.
* Wide range of supported client libraries. ESD, ALSA, oss, libao and
GStreamer client applications are supported as-is. Native PulseAudio
plug-ins are also available for xmms and mplayer.
.
* Good low latency behaviour and very accurate latency measurement for
playback and recording. Ability to fully synchronize multiple playback
streams.
.
* Network transparency, allowing an application to play back or record
audio on a different machine than the one it is running on.
.
* Extensible plug-in architecture with plug-ins for jackd, multicast-rtp
lirc and avahi, just to name a few.
.
This package contains the daemon and basic module set.
- pulseaudio-dbg: PulseAudio sound server detached debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains the detached debugging symbols for the daemon and
basic module set.
- pulseaudio-esound-compat: PulseAudio ESD compatibility layer
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains the ESD compatibility components used by some
older versions of complete desktop environments, e.g., GNOME, and
many useful applications. It enables a PulseAudio sound server to
fully replace ESD.
- pulseaudio-esound-compat-dbg: PulseAudio ESD compatibility layer debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains debugging symbols for the ESD compatibility components.
- pulseaudio-module-bluetooth: Bluetooth module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to work with bluetooth devices, like headset
or audio gateway.
.
The module is called module-bluetooth
- pulseaudio-module-bluetooth-dbg: Bluetooth module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains debugging symbols for the PulseAudio bluetooth module.
- pulseaudio-module-gconf: GConf module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to store additional configuration in GConf.
.
The module is called module-gconf.
- pulseaudio-module-gconf-dbg: GConf module for PulseAudio sound server debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains debugging symbols for the PulseAudio GConf module.
- pulseaudio-module-jack: jackd modules for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
These modules enables PulseAudio to connect to a jackd daemon.
.
The modules are called module-jack-sink, module-jack-source.
- pulseaudio-module-jack-dbg: jackd modules for PulseAudio sound server debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains debugging symbols for the PulseAudio jack modules.
- pulseaudio-module-lirc: lirc module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables the volume of a PulseAudio sink to be controlled when
buttons of an infrared remote control are pressed (through LIRC).
.
The module is called module-lirc.
- pulseaudio-module-lirc-dbg: lirc module for PulseAudio sound server debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains debugging symbols for the PulseAudio lirc module.
- pulseaudio-module-raop: RAOP module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to stream audio to an Apple Airport Express.
- pulseaudio-module-raop-dbg: RAOP module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains debugging symbols for the PulseAudio RAOP module.
- pulseaudio-module-x11: X11 module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to publish itself as the default sound
server to the X11 root window automatically upon startup. There is also a
module to playback a sound file in place of the X11 bell beep.
.
The modules are called module-x11-publish and module-x11-bell.
- pulseaudio-module-x11-dbg: X11 module for PulseAudio sound server debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains debugging symbols for the PulseAudio X11 modules.
- pulseaudio-module-zeroconf: Zeroconf module for PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This module enables PulseAudio to publish available sinks and sources via
zeroconf (aka. Avahi, mdns).
.
The module is called module-zeroconf- publish.
- pulseaudio-module-zeroconf-dbg: Zeroconf module for PulseAudio sound server debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains detached debugging symbols for the zeroconf module.
- pulseaudio-utils: Command line tools for the PulseAudio sound server
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
These tools provide command line access to various features of the
PulseAudio sound server. Included tools are:
.
paplay - Playback a WAV file via a PulseAudio sink.
pacat - Cat raw audio data to a PulseAudio sink.
parec - Cat raw audio data from a PulseAudio source.
pacmd - Connect to PulseAudio's built-in command line control interface.
pactl - Send a control command to a PulseAudio server.
padsp - /dev/dsp wrapper to transparently support OSS applications.
pax11publish - Store/retrieve PulseAudio default server/sink/source
settings in the X11 root window.
- pulseaudio-utils-dbg: PulseAudio command line tools detached debugging symbols
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
.
This package contains detached debugging symbols for the command line tools.