[ 0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17) [ 0.000000] Command line: BOOT_IMAGE=/root/default@/boot/vmlinuz-4.15.0-20-generic root=ZFS=zroot/root/default ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000bd009fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd00a000-0x00000000bd309fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd30a000-0x00000000bd396fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd397000-0x00000000bd438fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bd439000-0x00000000be548fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be549000-0x00000000be5c6fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000be5c7000-0x00000000be5c7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000be5c8000-0x00000000be60afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be60b000-0x00000000bea32fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bea33000-0x00000000beff3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000beff4000-0x00000000beffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000cf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xbd42a000 ACPI 2.0=0xbd42a000 SMBIOS=0xf04c0 MPS=0xfd460 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: MSI MS-7758/Z77A-G43 (MS-7758), BIOS V2.13 03/07/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x42f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FE0000000 write-back [ 0.000000] 2 base 420000000 mask FF0000000 write-back [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 base 42F800000 mask FFF800000 uncachable [ 0.000000] 6 base 42F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 16110M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 9 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd7c0-0x000fd7cf] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] BRK [0x36133e000, 0x36133efff] PGTABLE [ 0.000000] BRK [0x36133f000, 0x36133ffff] PGTABLE [ 0.000000] BRK [0x361340000, 0x361340fff] PGTABLE [ 0.000000] BRK [0x361341000, 0x361341fff] PGTABLE [ 0.000000] BRK [0x361342000, 0x361342fff] PGTABLE [ 0.000000] BRK [0x361343000, 0x361343fff] PGTABLE [ 0.000000] BRK [0x361344000, 0x361344fff] PGTABLE [ 0.000000] BRK [0x361345000, 0x361345fff] PGTABLE [ 0.000000] BRK [0x361346000, 0x361346fff] PGTABLE [ 0.000000] BRK [0x361347000, 0x361347fff] PGTABLE [ 0.000000] BRK [0x361348000, 0x361348fff] PGTABLE [ 0.000000] BRK [0x361349000, 0x361349fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x30579000-0x342b3fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BD42A000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BD42A078 00006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BD434588 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BD42A178 00A40E (v02 ALASKA A M I 00000024 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BD437080 000040 [ 0.000000] ACPI: APIC 0x00000000BD434698 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BD434730 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000BD434778 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BD4347B8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000BD4347F0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000BD434B60 0005CC (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000BD435130 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR 0x00000000BD435C58 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x42f5c7000-0x42f5f1fff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000042f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000bd009fff] [ 0.000000] node 0: [mem 0x00000000bd30a000-0x00000000bd396fff] [ 0.000000] node 0: [mem 0x00000000be5c7000-0x00000000be5c7fff] [ 0.000000] node 0: [mem 0x00000000be60b000-0x00000000bea32fff] [ 0.000000] node 0: [mem 0x00000000beff4000-0x00000000beffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f5fffff] [ 0.000000] On node 0 totalpages: 4114537 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 28 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12044 pages used for memmap [ 0.000000] DMA32 zone: 770763 pages, LIFO batch:31 [ 0.000000] Normal zone: 52184 pages used for memmap [ 0.000000] Normal zone: 3339776 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbd00a000-0xbd309fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbd397000-0xbd438fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbd439000-0xbe548fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe549000-0xbe5c6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe5c8000-0xbe60afff] [ 0.000000] PM: Registered nosave memory: [mem 0xbea33000-0xbeff3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xcf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4050217 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/root/default@/boot/vmlinuz-4.15.0-20-generic root=ZFS=zroot/root/default ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 15819556K/16458148K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 638592K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39065 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 36 [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.000000] DMAR: RMRR base: 0x000000be48e000 end: 0x000000be49cfff [ 0.000000] DMAR: RMRR base: 0x000000bf800000 end: 0x000000cf9fffff [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.000000] x2apic enabled [ 0.000000] Switched APIC routing to cluster x2apic. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 3400.034 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.06 BogoMIPS (lpj=13600136) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.029083] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.030025] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.030063] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.030095] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.030242] CPU: Physical Processor ID: 0 [ 0.030242] CPU: Processor Core ID: 0 [ 0.030246] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.030247] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.030249] mce: CPU supports 9 MCE banks [ 0.030256] CPU0: Thermal monitoring enabled (TM1) [ 0.030263] process: using mwait in idle threads [ 0.030265] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.030266] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.030267] Spectre V2 : Mitigation: Full generic retpoline [ 0.030344] Freeing SMP alternatives memory: 36K [ 0.039247] TSC deadline timer enabled [ 0.039249] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.039297] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.039311] ... version: 3 [ 0.039312] ... bit width: 48 [ 0.039312] ... generic registers: 4 [ 0.039312] ... value mask: 0000ffffffffffff [ 0.039313] ... max period: 00007fffffffffff [ 0.039313] ... fixed-purpose events: 3 [ 0.039314] ... event mask: 000000070000000f [ 0.039337] Hierarchical SRCU implementation. [ 0.040000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.040000] smp: Bringing up secondary CPUs ... [ 0.040000] x86: Booting SMP configuration: [ 0.040000] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.050344] smp: Brought up 1 node, 8 CPUs [ 0.050344] smpboot: Max logical packages: 1 [ 0.050344] smpboot: Total of 8 processors activated (54400.54 BogoMIPS) [ 0.052386] devtmpfs: initialized [ 0.052386] x86/mm: Memory block size: 128MB [ 0.052789] evm: security.selinux [ 0.052790] evm: security.SMACK64 [ 0.052790] evm: security.SMACK64EXEC [ 0.052790] evm: security.SMACK64TRANSMUTE [ 0.052791] evm: security.SMACK64MMAP [ 0.052791] evm: security.apparmor [ 0.052791] evm: security.ima [ 0.052792] evm: security.capability [ 0.052802] PM: Registering ACPI NVS region [mem 0xbd397000-0xbd438fff] (663552 bytes) [ 0.052802] PM: Registering ACPI NVS region [mem 0xbe5c8000-0xbe60afff] (274432 bytes) [ 0.052802] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.052802] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.052802] pinctrl core: initialized pinctrl subsystem [ 0.052802] RTC time: 11:16:41, date: 05/26/18 [ 0.052802] NET: Registered protocol family 16 [ 0.052802] audit: initializing netlink subsys (disabled) [ 0.052802] audit: type=2000 audit(1527333400.052:1): state=initialized audit_enabled=0 res=1 [ 0.052802] cpuidle: using governor ladder [ 0.052802] cpuidle: using governor menu [ 0.052802] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.052802] ACPI: bus type PCI registered [ 0.052802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.052802] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.052802] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.052802] PCI: Using configuration type 1 for base access [ 0.052802] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.052864] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052864] ACPI: Added _OSI(Module Device) [ 0.052864] ACPI: Added _OSI(Processor Device) [ 0.052864] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052864] ACPI: Added _OSI(Processor Aggregator Device) [ 0.052864] ACPI: Executed 1 blocks of module-level executable AML code [ 0.058782] ACPI: Dynamic OEM Table Load: [ 0.058782] ACPI: SSDT 0xFFFF8B20DC420000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.058782] ACPI: Dynamic OEM Table Load: [ 0.058782] ACPI: SSDT 0xFFFF8B20DC447000 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.058782] ACPI: Dynamic OEM Table Load: [ 0.058782] ACPI: SSDT 0xFFFF8B20DCAF9600 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.061561] ACPI: Interpreter enabled [ 0.061574] ACPI: (supports S0 S3 S4 S5) [ 0.061575] ACPI: Using IOAPIC for interrupt routing [ 0.061597] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.061862] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.068915] ACPI: Power Resource [FN00] (off) [ 0.068980] ACPI: Power Resource [FN01] (off) [ 0.069043] ACPI: Power Resource [FN02] (off) [ 0.069107] ACPI: Power Resource [FN03] (off) [ 0.069170] ACPI: Power Resource [FN04] (off) [ 0.069697] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.069701] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.069935] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.070083] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.070084] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.070545] PCI host bridge to bus 0000:00 [ 0.070547] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.070548] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.070549] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.070550] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.070550] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.070551] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.070552] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.070553] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window] [ 0.070554] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.070560] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.070634] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.070659] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.070727] pci 0000:00:02.0: [8086:0162] type 00 class 0x038000 [ 0.070735] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] [ 0.070739] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.070743] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.070846] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.070867] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit] [ 0.070929] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.070995] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.071017] pci 0000:00:16.0: reg 0x10: [mem 0xf7919000-0xf791900f 64bit] [ 0.071082] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.071153] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.071172] pci 0000:00:1a.0: reg 0x10: [mem 0xf7917000-0xf79173ff] [ 0.071247] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.071314] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.071331] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit] [ 0.071388] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.071459] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.071535] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.071607] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.071681] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.071753] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401 [ 0.071828] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.071905] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.071924] pci 0000:00:1d.0: reg 0x10: [mem 0xf7916000-0xf79163ff] [ 0.071999] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.072068] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.072227] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.072242] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.072248] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.072254] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.072260] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.072265] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.072271] pci 0000:00:1f.2: reg 0x24: [mem 0xf7915000-0xf79157ff] [ 0.072306] pci 0000:00:1f.2: PME# supported from D3hot [ 0.072368] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.072383] pci 0000:00:1f.3: reg 0x10: [mem 0xf7914000-0xf79140ff 64bit] [ 0.072401] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.072504] pci 0000:01:00.0: [10de:13c2] type 00 class 0x030000 [ 0.072518] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.072526] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.072534] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.072539] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.072544] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.072549] pci 0000:01:00.0: enabling Extended Tags [ 0.072556] pci 0000:01:00.0: BAR 3: assigned to efifb [ 0.072620] pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300 [ 0.072630] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.072653] pci 0000:01:00.1: enabling Extended Tags [ 0.084013] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.084015] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.084016] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.084018] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.084066] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.084132] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.084166] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.084197] pci 0000:03:00.0: reg 0x18: [mem 0xf7804000-0xf7804fff 64bit pref] [ 0.084217] pci 0000:03:00.0: reg 0x20: [mem 0xf7800000-0xf7803fff 64bit pref] [ 0.084334] pci 0000:03:00.0: supports D1 D2 [ 0.084335] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.096021] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.096024] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.096026] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff] [ 0.096093] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400 [ 0.096267] pci 0000:04:00.0: supports D1 D2 [ 0.096268] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.116014] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode) [ 0.116023] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.116024] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.116025] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.116026] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.116026] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.116027] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.116028] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.116029] pci 0000:00:1c.3: bridge window [mem 0xcfa00000-0xfeafffff window] (subtractive decode) [ 0.116152] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.116729] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.116782] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.116833] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.116883] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.116933] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.116984] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.117035] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.117085] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.117419] SCSI subsystem initialized [ 0.117428] libata version 3.00 loaded. [ 0.117428] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.117428] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.117428] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.117428] vgaarb: loaded [ 0.117428] ACPI: bus type USB registered [ 0.117428] usbcore: registered new interface driver usbfs [ 0.117428] usbcore: registered new interface driver hub [ 0.117428] usbcore: registered new device driver usb [ 0.117428] EDAC MC: Ver: 3.0.0 [ 0.117428] Registered efivars operations [ 0.134774] PCI: Using ACPI for IRQ routing [ 0.136172] PCI: pci_cache_line_size set to 64 bytes [ 0.136210] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.136211] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.136212] e820: reserve RAM buffer [mem 0xbd00a000-0xbfffffff] [ 0.136213] e820: reserve RAM buffer [mem 0xbd397000-0xbfffffff] [ 0.136214] e820: reserve RAM buffer [mem 0xbe5c8000-0xbfffffff] [ 0.136215] e820: reserve RAM buffer [mem 0xbea33000-0xbfffffff] [ 0.136215] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 0.136216] e820: reserve RAM buffer [mem 0x42f600000-0x42fffffff] [ 0.136271] NetLabel: Initializing [ 0.136272] NetLabel: domain hash size = 128 [ 0.136272] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.136281] NetLabel: unlabeled traffic allowed by default [ 0.136290] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.136290] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.138046] clocksource: Switched to clocksource hpet [ 0.143213] VFS: Disk quotas dquot_6.6.0 [ 0.143225] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.143291] AppArmor: AppArmor Filesystem Enabled [ 0.143309] pnp: PnP ACPI init [ 0.143401] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.143405] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.143472] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.143473] system 00:01: [io 0x1000-0x100f] has been reserved [ 0.143474] system 00:01: [io 0xffff] has been reserved [ 0.143475] system 00:01: [io 0xffff] has been reserved [ 0.143476] system 00:01: [io 0x0400-0x0453] has been reserved [ 0.143477] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.143478] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.143479] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.143482] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143499] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.143536] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.143539] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.143661] system 00:04: [io 0x0a00-0x0a1f] has been reserved [ 0.143663] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.143665] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143878] pnp 00:05: [dma 0 disabled] [ 0.143913] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.143951] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.143954] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.144205] pnp 00:07: [dma 3] [ 0.144293] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.144493] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.144494] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.144496] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.144497] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.144498] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.144499] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.144500] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.144501] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.144502] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.144503] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.144506] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.144652] system 00:09: [mem 0x20000000-0x201fffff] has been reserved [ 0.144653] system 00:09: [mem 0x40004000-0x40004fff] has been reserved [ 0.144656] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.144674] pnp: PnP ACPI: found 10 devices [ 0.150285] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.150323] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.150325] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.150327] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.150328] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.150330] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.150340] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.150341] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.150345] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff] [ 0.150351] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.150369] pci 0000:00:1c.3: PCI bridge to [bus 04-05] [ 0.150379] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.150380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.150381] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.150382] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.150383] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.150384] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.150385] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.150386] pci_bus 0000:00: resource 11 [mem 0xcfa00000-0xfeafffff window] [ 0.150387] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.150387] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.150388] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.150389] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.150390] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.150391] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.150392] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.150393] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.150394] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.150395] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.150396] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.150397] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.150398] pci_bus 0000:04: resource 11 [mem 0xcfa00000-0xfeafffff window] [ 0.150471] NET: Registered protocol family 2 [ 0.150602] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.150729] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.150826] TCP: Hash tables configured (established 131072 bind 65536) [ 0.150850] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.150879] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.150930] NET: Registered protocol family 1 [ 0.151339] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.151347] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.151373] Unpacking initramfs... [ 0.709053] Freeing initrd memory: 62700K [ 0.709096] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.709099] software IO TLB [mem 0xab200000-0xaf200000] (64MB) mapped at [000000007804e91e-0000000081da2d2e] [ 0.709353] Scanning for low memory corruption every 60 seconds [ 0.709784] Initialise system trusted keyrings [ 0.709792] Key type blacklist registered [ 0.709815] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.710485] zbud: loaded [ 0.710781] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.710858] fuse init (API version 7.26) [ 0.711667] Key type asymmetric registered [ 0.711667] Asymmetric key parser 'x509' registered [ 0.711684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.711711] io scheduler noop registered [ 0.711712] io scheduler deadline registered [ 0.711735] io scheduler cfq registered (default) [ 0.712203] efifb: probing for efifb [ 0.712209] efifb: framebuffer at 0xf1000000, using 1216k, total 1216k [ 0.712209] efifb: mode is 640x480x32, linelength=2560, pages=1 [ 0.712210] efifb: scrolling: redraw [ 0.712211] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.712266] Console: switching to colour frame buffer device 80x30 [ 0.712273] fb0: EFI VGA frame buffer device [ 0.712278] intel_idle: MWAIT substates: 0x1120 [ 0.712279] intel_idle: v0.4.1 model 0x3A [ 0.712442] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.712506] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.712526] ACPI: Power Button [PWRB] [ 0.712548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.712562] ACPI: Power Button [PWRF] [ 0.713196] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.713319] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.713319] ACPI: Thermal Zone [TZ00] (28 C) [ 0.713543] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.713543] ACPI: Thermal Zone [TZ01] (30 C) [ 0.713619] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.734109] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.735579] Linux agpgart interface v0.103 [ 0.737034] loop: module loaded [ 0.737128] libphy: Fixed MDIO Bus: probed [ 0.737128] tun: Universal TUN/TAP device driver, 1.6 [ 0.737148] PPP generic driver version 2.4.2 [ 0.737173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.737174] ehci-pci: EHCI PCI platform driver [ 0.737247] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.737252] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.737262] ehci-pci 0000:00:1a.0: debug port 2 [ 0.741150] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.741161] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7917000 [ 0.756011] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.756044] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.756045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.756046] usb usb1: Product: EHCI Host Controller [ 0.756047] usb usb1: Manufacturer: Linux 4.15.0-20-generic ehci_hcd [ 0.756048] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.756153] hub 1-0:1.0: USB hub found [ 0.756156] hub 1-0:1.0: 2 ports detected [ 0.756313] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.756316] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.756325] ehci-pci 0000:00:1d.0: debug port 2 [ 0.760222] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.760230] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7916000 [ 0.776013] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.776033] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.776034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.776035] usb usb2: Product: EHCI Host Controller [ 0.776036] usb usb2: Manufacturer: Linux 4.15.0-20-generic ehci_hcd [ 0.776036] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.776104] hub 2-0:1.0: USB hub found [ 0.776107] hub 2-0:1.0: 2 ports detected [ 0.776188] ehci-platform: EHCI generic platform driver [ 0.776194] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.776196] ohci-pci: OHCI PCI platform driver [ 0.776200] ohci-platform: OHCI generic platform driver [ 0.776204] uhci_hcd: USB Universal Host Controller Interface driver [ 0.776279] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.776282] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.777348] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 0.777352] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.777441] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.777442] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.777443] usb usb3: Product: xHCI Host Controller [ 0.777444] usb usb3: Manufacturer: Linux 4.15.0-20-generic xhci-hcd [ 0.777444] usb usb3: SerialNumber: 0000:00:14.0 [ 0.777542] hub 3-0:1.0: USB hub found [ 0.777548] hub 3-0:1.0: 4 ports detected [ 0.777805] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.777807] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.777826] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.777827] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.777828] usb usb4: Product: xHCI Host Controller [ 0.777829] usb usb4: Manufacturer: Linux 4.15.0-20-generic xhci-hcd [ 0.777830] usb usb4: SerialNumber: 0000:00:14.0 [ 0.777917] hub 4-0:1.0: USB hub found [ 0.777923] hub 4-0:1.0: 4 ports detected [ 0.778202] i8042: PNP: No PS/2 controller found. [ 0.778327] mousedev: PS/2 mouse device common for all mice [ 0.778522] rtc_cmos 00:02: RTC can wake from S4 [ 0.778668] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.778691] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.778696] i2c /dev entries driver [ 0.778720] device-mapper: uevent: version 1.0.3 [ 0.778782] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.778786] intel_pstate: Intel P-state driver initializing [ 0.779215] ledtrig-cpu: registered to indicate activity on CPUs [ 0.779217] EFI Variables Facility v0.08 2004-May-17 [ 0.797765] NET: Registered protocol family 10 [ 0.800315] Segment Routing with IPv6 [ 0.800329] NET: Registered protocol family 17 [ 0.800389] Key type dns_resolver registered [ 0.800788] RAS: Correctable Errors collector initialized. [ 0.800804] microcode: sig=0x306a9, pf=0x2, revision=0x19 [ 0.801003] microcode: Microcode Update Driver: v2.2. [ 0.801008] sched_clock: Marking stable (801000067, 0)->(791859625, 9140442) [ 0.801188] registered taskstats version 1 [ 0.801194] Loading compiled-in X.509 certificates [ 0.802748] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208' [ 0.803070] Couldn't get size: 0x800000000000000e [ 0.803071] MODSIGN: Couldn't get UEFI db list [ 0.803258] Couldn't get size: 0x800000000000000e [ 0.803259] MODSIGN: Couldn't get UEFI MokListRT [ 0.803791] zswap: loaded using pool lzo/zbud [ 0.805907] Key type big_key registered [ 0.805910] Key type trusted registered [ 0.806962] Key type encrypted registered [ 0.806963] AppArmor: AppArmor sha1 policy hashing enabled [ 0.806965] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.806981] evm: HMAC attrs: 0x1 [ 0.807200] Magic number: 2:832:277 [ 0.807219] tty tty14: hash matches [ 0.807296] rtc_cmos 00:02: setting system clock to 2018-05-26 11:16:41 UTC (1527333401) [ 0.807325] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.807325] EDD information not available. [ 0.809025] Freeing unused kernel memory: 2404K [ 0.809026] Write protecting the kernel read-only data: 20480k [ 0.809454] Freeing unused kernel memory: 2008K [ 0.812078] Freeing unused kernel memory: 1904K [ 0.816818] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.816819] x86/mm: Checking user space page tables [ 0.821408] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.869530] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.870832] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.876156] ipmi message handler version 39.2 [ 0.877321] ipmi device interface [ 0.878423] ahci 0000:00:1f.2: version 3.0 [ 0.880033] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.880038] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.880702] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x0000000078a059f1, d4:3d:7e:2b:e4:ac, XID 0c900800 IRQ 28 [ 0.880704] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.889136] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode [ 0.889139] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.893241] nvidia: loading out-of-tree module taints kernel. [ 0.893249] nvidia: module license 'NVIDIA' taints kernel. [ 0.893249] Disabling lock debugging due to kernel taint [ 0.894334] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 0.896671] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 0.903859] nvidia-nvlink: Nvlink Core is being initialized, major device number 243 [ 0.904114] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 0.904183] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.48 Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts) [ 0.906088] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.48 Wed Mar 21 23:48:34 PDT 2018 [ 0.906654] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 0.906656] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 0.940519] scsi host0: ahci [ 0.940747] scsi host1: ahci [ 0.940938] scsi host2: ahci [ 0.941047] scsi host3: ahci [ 0.941133] scsi host4: ahci [ 0.941237] scsi host5: ahci [ 0.941273] ata1: SATA max UDMA/133 abar m2048@0xf7915000 port 0xf7915100 irq 27 [ 0.941274] ata2: SATA max UDMA/133 abar m2048@0xf7915000 port 0xf7915180 irq 27 [ 0.941275] ata3: DUMMY [ 0.941276] ata4: SATA max UDMA/133 abar m2048@0xf7915000 port 0xf7915280 irq 27 [ 0.941278] ata5: SATA max UDMA/133 abar m2048@0xf7915000 port 0xf7915300 irq 27 [ 0.941279] ata6: SATA max UDMA/133 abar m2048@0xf7915000 port 0xf7915380 irq 27 [ 0.941325] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 0.941681] [drm] Memory usable by graphics device = 2048M [ 0.941683] checking generic (f1000000 130000) vs hw (d0000000 10000000) [ 0.941683] [drm] Replacing VGA console driver [ 0.947610] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.947611] [drm] Driver supports precise vblank timestamp query. [ 0.954216] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 1 [ 1.008639] [drm] Cannot find any crtc or sizes [ 1.012287] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 1.092049] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.112048] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.248809] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.248811] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.249151] hub 1-1:1.0: USB hub found [ 1.249234] hub 1-1:1.0: 6 ports detected [ 1.254945] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.254968] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.255004] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.255022] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.255036] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.255236] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.255243] No Local Variables are initialized for Method [_GTF] [ 1.255244] No Arguments are initialized for method [_GTF] [ 1.255245] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.255252] ata4.00: supports DRM functions and may not be fully accessible [ 1.255289] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.255295] No Local Variables are initialized for Method [_GTF] [ 1.255296] No Arguments are initialized for method [_GTF] [ 1.255297] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.255303] ata2.00: supports DRM functions and may not be fully accessible [ 1.255447] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.255453] No Local Variables are initialized for Method [_GTF] [ 1.255454] No Arguments are initialized for method [_GTF] [ 1.255455] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.255593] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.255601] No Local Variables are initialized for Method [_GTF] [ 1.255603] No Arguments are initialized for method [_GTF] [ 1.255604] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.255613] ata6.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100 [ 1.255618] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133 [ 1.255620] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.255919] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.255927] No Local Variables are initialized for Method [_GTF] [ 1.255928] No Arguments are initialized for method [_GTF] [ 1.255930] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.256036] ata1.00: configured for UDMA/133 [ 1.256108] ata2.00: ATA-10: Crucial_CT525MX300SSD1, M0CR031, max UDMA/133 [ 1.256109] ata2.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.256147] ata4.00: ATA-10: Crucial_CT525MX300SSD1, M0CR031, max UDMA/133 [ 1.256148] ata4.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.256251] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5 [ 1.256442] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.256449] No Local Variables are initialized for Method [_GTF] [ 1.256451] No Arguments are initialized for method [_GTF] [ 1.256452] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.256461] ata6.00: configured for UDMA/100 [ 1.256471] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.256508] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.256518] sd 0:0:0:0: [sda] Write Protect is off [ 1.256519] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.256529] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.257916] sda: sda1 sda2 sda3 sda4 [ 1.258379] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.258387] No Local Variables are initialized for Method [_GTF] [ 1.258389] No Arguments are initialized for method [_GTF] [ 1.258390] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.258399] ata4.00: supports DRM functions and may not be fully accessible [ 1.258427] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.258430] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.258438] No Local Variables are initialized for Method [_GTF] [ 1.258439] No Arguments are initialized for method [_GTF] [ 1.258441] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.258449] ata2.00: supports DRM functions and may not be fully accessible [ 1.258733] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.258751] No Local Variables are initialized for Method [_GTF] [ 1.258751] No Arguments are initialized for method [_GTF] [ 1.258752] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.259783] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 1.259786] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.261006] ata4.00: configured for UDMA/133 [ 1.261076] ata2.00: configured for UDMA/133 [ 1.261209] scsi 1:0:0:0: Direct-Access ATA Crucial_CT525MX3 R031 PQ: 0 ANSI: 5 [ 1.261469] ata2.00: Enabling discard_zeroes_data [ 1.261502] sd 1:0:0:0: [sdb] 1025610768 512-byte logical blocks: (525 GB/489 GiB) [ 1.261506] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.261509] sd 1:0:0:0: [sdb] Write Protect is off [ 1.261510] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.261521] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.261628] ata2.00: Enabling discard_zeroes_data [ 1.261722] scsi 3:0:0:0: Direct-Access ATA Crucial_CT525MX3 R031 PQ: 0 ANSI: 5 [ 1.261948] ata4.00: Enabling discard_zeroes_data [ 1.261955] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.262205] sd 3:0:0:0: [sdc] 1025610768 512-byte logical blocks: (525 GB/489 GiB) [ 1.262218] sd 3:0:0:0: [sdc] Write Protect is off [ 1.262219] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.262278] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.262386] ata4.00: Enabling discard_zeroes_data [ 1.262825] sdb: sdb1 sdb2 sdb3 sdb4 [ 1.263040] ata2.00: Enabling discard_zeroes_data [ 1.263248] sd 1:0:0:0: [sdb] supports TCG Opal [ 1.263249] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.263523] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.263528] No Local Variables are initialized for Method [_GTF] [ 1.263528] No Arguments are initialized for method [_GTF] [ 1.263530] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.263798] ata5.00: configured for UDMA/133 [ 1.263943] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P AB51 PQ: 0 ANSI: 5 [ 1.264021] sdc: sdc1 sdc2 [ 1.264066] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.264067] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 1.264071] sd 4:0:0:0: [sdd] Write Protect is off [ 1.264072] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.264079] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.264120] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 1.264191] ata4.00: Enabling discard_zeroes_data [ 1.264383] usb 4-3: New USB device found, idVendor=2109, idProduct=0812 [ 1.264384] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.264385] usb 4-3: Product: USB3.0 Hub [ 1.264386] usb 4-3: Manufacturer: VIA Labs, Inc. [ 1.264671] sd 3:0:0:0: [sdc] supports TCG Opal [ 1.264672] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.264686] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB01 PQ: 0 ANSI: 5 [ 1.265471] hub 4-3:1.0: USB hub found [ 1.265626] hub 4-3:1.0: 4 ports detected [ 1.268626] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.268629] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.268882] hub 2-1:1.0: USB hub found [ 1.268979] hub 2-1:1.0: 8 ports detected [ 1.274715] sdd: sdd1 sdd2 sdd3 [ 1.274999] sd 4:0:0:0: [sdd] Attached SCSI disk [ 1.330290] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.330292] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.330455] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 1.330501] sr 5:0:0:0: Attached scsi generic sg4 type 5 [ 1.392051] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.536027] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 1.543238] usb 3-3: New USB device found, idVendor=2109, idProduct=2812 [ 1.543241] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.543243] usb 3-3: Product: USB2.0 Hub [ 1.543245] usb 3-3: Manufacturer: VIA Labs, Inc. [ 1.543705] hub 3-3:1.0: USB hub found [ 1.544078] hub 3-3:1.0: 4 ports detected [ 1.645944] usb 1-1.1: New USB device found, idVendor=045e, idProduct=02e6 [ 1.645948] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.645950] usb 1-1.1: Product: XBOX ACC [ 1.645952] usb 1-1.1: Manufacturer: Microsoft Inc. [ 1.645954] usb 1-1.1: SerialNumber: 272862 [ 1.652180] usb 4-3.1: new SuperSpeed USB device number 3 using xhci_hcd [ 1.724026] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 1.724037] tsc: Refined TSC clocksource calibration: 3400.023 MHz [ 1.724043] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31026473058, max_idle_ns: 440795314252 ns [ 1.742980] SPL: Loaded module v0.7.5-1ubuntu1 [ 1.844477] usb 1-1.2: New USB device found, idVendor=1038, idProduct=1260 [ 1.844478] usb 1-1.2: New USB device strings: Mfr=4, Product=5, SerialNumber=0 [ 1.844479] usb 1-1.2: Product: SteelSeries Arctis 7 [ 1.844480] usb 1-1.2: Manufacturer: SteelSeries [ 1.853635] hidraw: raw HID events driver (C) Jiri Kosina [ 1.862456] usbcore: registered new interface driver usbhid [ 1.862457] usbhid: USB HID core driver [ 1.864147] input: SteelSeries SteelSeries Arctis 7 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.5/0003:1038:1260.0001/input/input3 [ 1.904325] usb 4-3.1: New USB device found, idVendor=2109, idProduct=0812 [ 1.904327] usb 4-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.904328] usb 4-3.1: Product: USB3.0 Hub [ 1.904328] usb 4-3.1: Manufacturer: VIA Labs, Inc. [ 1.905914] hub 4-3.1:1.0: USB hub found [ 1.906057] hub 4-3.1:1.0: 4 ports detected [ 1.924256] hid-generic 0003:1038:1260.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [SteelSeries SteelSeries Arctis 7] on usb-0000:00:1a.0-1.2/input5 [ 1.928008] usb 1-1.6: new full-speed USB device number 5 using ehci-pci [ 1.996019] usb 3-3.1: new high-speed USB device number 3 using xhci_hcd [ 2.038475] usb 1-1.6: New USB device found, idVendor=04f9, idProduct=0254 [ 2.038476] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.038477] usb 1-1.6: Product: DCP-J315W [ 2.038478] usb 1-1.6: Manufacturer: Brother [ 2.038479] usb 1-1.6: SerialNumber: BROD3F248529 [ 2.041955] usb-storage 1-1.6:1.2: USB Mass Storage device detected [ 2.042018] scsi host6: usb-storage 1-1.6:1.2 [ 2.042062] usbcore: registered new interface driver usb-storage [ 2.042832] usbcore: registered new interface driver uas [ 2.110740] usb 3-3.1: New USB device found, idVendor=2109, idProduct=2812 [ 2.110741] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.110742] usb 3-3.1: Product: USB2.0 Hub [ 2.110743] usb 3-3.1: Manufacturer: VIA Labs, Inc. [ 2.111152] hub 3-3.1:1.0: USB hub found [ 2.111305] hub 3-3.1:1.0: 4 ports detected [ 2.208020] usb 3-3.2: new full-speed USB device number 4 using xhci_hcd [ 2.329785] usb 3-3.2: New USB device found, idVendor=1e7d, idProduct=2e22 [ 2.329787] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.329788] usb 3-3.2: Product: ROCCAT Kone XTD [ 2.329789] usb 3-3.2: Manufacturer: ROCCAT [ 2.424018] usb 3-3.1.2: new high-speed USB device number 5 using xhci_hcd [ 2.541243] usb 3-3.1.2: New USB device found, idVendor=05e3, idProduct=0608 [ 2.541244] usb 3-3.1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.541245] usb 3-3.1.2: Product: USB2.0 Hub [ 2.541662] hub 3-3.1.2:1.0: USB hub found [ 2.541929] hub 3-3.1.2:1.0: 4 ports detected [ 2.636017] usb 3-3.1.3: new full-speed USB device number 6 using xhci_hcd [ 2.782723] clocksource: Switched to clocksource tsc [ 2.785527] usb 3-3.1.3: New USB device found, idVendor=046d, idProduct=c52b [ 2.785528] usb 3-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.785529] usb 3-3.1.3: Product: USB Receiver [ 2.785530] usb 3-3.1.3: Manufacturer: Logitech [ 2.792484] logitech-djreceiver 0003:046D:C52B.0006: hiddev1,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.1.3/input2 [ 2.888016] usb 3-3.1.4: new full-speed USB device number 7 using xhci_hcd [ 2.922296] input: Logitech K360 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.3/3-3.1.3:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input4 [ 2.922347] logitech-hidpp-device 0003:046D:4004.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:14.0-3.1.3:1 [ 3.001909] usb 3-3.1.4: New USB device found, idVendor=046d, idProduct=c22d [ 3.001910] usb 3-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.001911] usb 3-3.1.4: Product: G510s Gaming Keyboard [ 3.001912] usb 3-3.1.4: Manufacturer: Logitech [ 3.005404] input: Logitech G510s Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4:1.0/0003:046D:C22D.0008/input/input5 [ 3.064154] hid-generic 0003:046D:C22D.0008: input,hidraw3: USB HID v1.11 Keyboard [Logitech G510s Gaming Keyboard] on usb-0000:00:14.0-3.1.4/input0 [ 3.065348] input: Logitech G510s Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4:1.1/0003:046D:C22D.0009/input/input6 [ 3.084508] scsi 6:0:0:0: Direct-Access Brother DCP-J315W 1.00 PQ: 0 ANSI: 2 [ 3.084784] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 3.124217] hid-generic 0003:046D:C22D.0009: input,hiddev2,hidraw4: USB HID v1.11 Device [Logitech G510s Gaming Keyboard] on usb-0000:00:14.0-3.1.4/input1 [ 3.144897] sd 6:0:0:0: [sde] Attached SCSI removable disk [ 3.319534] ZFS: Loaded module v0.7.5-1ubuntu13, ZFS pool version 5000, ZFS filesystem version 5 [ 4.114914] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.155061] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.172424] systemd[1]: Detected architecture x86-64. [ 4.173982] systemd[1]: Set hostname to . [ 4.272744] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.273113] systemd[1]: Set up automount mnt-nas-data1.automount. [ 4.273126] systemd[1]: Reached target Swap. [ 4.273168] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.273273] systemd[1]: Set up automount mnt-nas-data2.automount. [ 4.273961] systemd[1]: Created slice User and Session Slice. [ 4.273971] systemd[1]: Reached target User and Group Name Lookups. [ 4.296566] lp: driver loaded but no devices found [ 4.299244] ppdev: user-space parallel port driver [ 4.301407] parport_pc 00:07: reported by Plug and Play ACPI [ 4.301477] parport0: PC-style at 0x378, irq 5 [PCSPP] [ 4.330484] systemd-journald[1562]: Received request to flush runtime journal from PID 1 [ 4.396345] lp0: using parport0 (interrupt-driven). [ 4.472562] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.472677] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247) [ 4.472683] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.472686] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 4.472689] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.472690] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 4.472694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.472695] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 4.472698] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.472698] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.496939] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 240 [ 4.505303] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 4.505305] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 4.505305] RAPL PMU: hw unit of domain package 2^-16 Joules [ 4.505306] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 4.526273] AVX version of gcm_enc/dec engaged. [ 4.526273] AES CTR mode by8 optimization enabled [ 4.536452] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 4.536644] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.536714] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 4.536758] snd_hda_intel 0000:01:00.1: Disabling MSI [ 4.536763] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 4.556752] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 4.556754] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.556755] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.556756] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.556756] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.556758] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 4.556759] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 4.556760] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 4.574527] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 4.574580] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.574625] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.574670] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 4.574731] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 4.574780] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 4.574832] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 4.574879] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 4.574928] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 4.645047] input: ROCCAT ROCCAT Kone XTD as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:1E7D:2E22.0002/input/input16 [ 4.704165] koneplus 0003:1E7D:2E22.0002: input,hiddev3,hidraw5: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone XTD] on usb-0000:00:14.0-3.2/input0 [ 4.704438] input: ROCCAT ROCCAT Kone XTD as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/0003:1E7D:2E22.0003/input/input17 [ 4.753104] usbcore: registered new interface driver snd-usb-audio [ 4.764150] koneplus 0003:1E7D:2E22.0003: input,hidraw6: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone XTD] on usb-0000:00:14.0-3.2/input1 [ 4.782457] intel_rapl: Found RAPL domain package [ 4.782458] intel_rapl: Found RAPL domain core [ 4.782459] intel_rapl: Found RAPL domain uncore [ 4.782463] intel_rapl: RAPL package 0 domain package locked by BIOS [ 4.782563] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window] [ 4.782699] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs [ 4.848004] raid6: sse2x1 gen() 10168 MB/s [ 4.896004] raid6: sse2x1 xor() 7379 MB/s [ 4.944005] raid6: sse2x2 gen() 12209 MB/s [ 4.992005] raid6: sse2x2 xor() 8673 MB/s [ 5.040004] raid6: sse2x4 gen() 16319 MB/s [ 5.088005] raid6: sse2x4 xor() 10175 MB/s [ 5.088006] raid6: using algorithm sse2x4 gen() 16319 MB/s [ 5.088006] raid6: .... xor() 10175 MB/s, rmw enabled [ 5.088007] raid6: using ssse3x2 recovery algorithm [ 5.088541] random: crng init done [ 5.089304] xor: automatically using best checksumming function avx [ 5.111159] Btrfs loaded, crc32c=crc32c-intel [ 5.111436] BTRFS: device fsid ebc6ccca-c141-440a-81f4-a19337de8800 devid 1 transid 26546 /dev/sdd2 [ 5.191666] NVRM: Your system is not currently configured to drive a VGA console on the primary VGA device. The NVIDIA Linux graphics driver requires the use of a text-mode VGA console. Use of other console drivers including, but not limited to, vesafb, may result in corruption and stability problems, and is not supported. [ 5.320702] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18 [ 5.320755] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 5.320803] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 [ 5.320849] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21 [ 5.645590] usblp 1-1.6:1.0: usblp4: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0254 [ 5.645625] usbcore: registered new interface driver usblp [ 5.982775] audit: type=1400 audit(1527333406.671:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=2835 comm="apparmor_parser" [ 5.982908] audit: type=1400 audit(1527333406.671:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4650/usr/lib/snapd/snap-confine" pid=2829 comm="apparmor_parser" [ 5.982911] audit: type=1400 audit(1527333406.671:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4650/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2829 comm="apparmor_parser" [ 5.983264] audit: type=1400 audit(1527333406.671:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=2832 comm="apparmor_parser" [ 5.983892] audit: type=1400 audit(1527333406.671:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=2833 comm="apparmor_parser" [ 5.983895] audit: type=1400 audit(1527333406.671:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=2833 comm="apparmor_parser" [ 5.984014] audit: type=1400 audit(1527333406.675:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=2831 comm="apparmor_parser" [ 5.984017] audit: type=1400 audit(1527333406.675:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=2831 comm="apparmor_parser" [ 5.984019] audit: type=1400 audit(1527333406.675:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=2831 comm="apparmor_parser" [ 5.985296] audit: type=1400 audit(1527333406.675:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2842 comm="apparmor_parser" [ 6.594746] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 6.722164] r8169 0000:03:00.0 enp3s0: link down [ 6.722239] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 6.723594] r8169 0000:03:00.0 enp3s0: link down [ 7.232743] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window] [ 7.232862] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs [ 7.481795] nvidia-modeset: Allocated GPU:0 (GPU-348cdf15-9b35-809a-886a-e42cc8c0d0c2) @ PCI:0000:01:00.0 [ 9.134486] r8169 0000:03:00.0 enp3s0: link up [ 9.134493] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 9.233058] vboxdrv: Found 8 processor cores [ 9.252153] vboxdrv: TSC mode is Invariant, tentative frequency 3400013682 Hz [ 9.252154] vboxdrv: Successfully loaded version 5.2.10_Ubuntu (interface 0x00290001) [ 9.256435] VBoxNetFlt: Successfully started. [ 9.260470] VBoxNetAdp: Successfully started. [ 9.265782] VBoxPciLinuxInit [ 9.268517] vboxpci: IOMMU not found (not registered) [ 11.288843] usblp4: removed [ 11.291604] usblp 1-1.6:1.0: usblp4: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0254 [ 15.340445] systemd-journald[1562]: Failed to set ACL on /var/log/journal/f8a78acf499a402aa80f90af9ef5c15c/user-1000.journal, ignoring: Operation not supported [ 6813.554493] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 6813.562743] JFS: nTxBlock = 8192, nTxLock = 65536 [ 6813.573321] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 6813.586218] QNX4 filesystem 0.2.3 registered. [ 7710.024478] PM: suspend entry (deep) [ 7710.024480] PM: Syncing filesystems ... done. [ 7712.091283] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7712.093000] OOM killer disabled. [ 7712.093000] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7712.094156] Suspending console(s) (use no_console_suspend to debug) [ 7712.094769] parport_pc 00:07: disabled [ 7712.094968] serial 00:05: disabled [ 7712.116664] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 7712.116678] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7712.116679] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 7712.116793] sd 1:0:0:0: [sdb] Stopping disk [ 7712.116825] sd 3:0:0:0: [sdc] Stopping disk [ 7712.118395] sd 0:0:0:0: [sda] Stopping disk [ 7712.124692] sd 4:0:0:0: [sdd] Synchronizing SCSI cache [ 7712.124790] sd 4:0:0:0: [sdd] Stopping disk [ 7712.152178] hub 4-3:1.0: hub_ext_port_status failed (err = -71) [ 7712.160679] hub 3-3.1:1.0: hub_ext_port_status failed (err = -71) [ 7712.172178] usb 4-3.1: Port disable: can't disable remote wake [ 7712.175678] usb 4-3-port1: cannot disable (err = -71) [ 7712.175685] usb 4-3-port1: device 4-3.1 not suspended yet [ 7712.175743] xhci_hcd 0000:00:14.0: Cannot set link state. [ 7712.180669] usb 3-3.1-port2: cannot disable (err = -71) [ 7712.180677] usb 3-3.1-port2: device 3-3.1.2 not suspended yet [ 7712.204643] xhci_hcd 0000:00:14.0: USB core suspending device not in U0/U1/U2. [ 7713.953188] ACPI: Preparing to enter system sleep state S3 [ 7713.953572] PM: Saving platform NVS memory [ 7713.953586] Disabling non-boot CPUs ... [ 7713.970154] smpboot: CPU 1 is now offline [ 7713.990114] smpboot: CPU 2 is now offline [ 7714.014112] smpboot: CPU 3 is now offline [ 7714.038114] smpboot: CPU 4 is now offline [ 7714.061989] smpboot: CPU 5 is now offline [ 7714.085986] smpboot: CPU 6 is now offline [ 7714.109955] smpboot: CPU 7 is now offline [ 7714.113167] ACPI: Low-level resume complete [ 7714.113217] PM: Restoring platform NVS memory [ 7714.113576] Enabling non-boot CPUs ... [ 7714.113636] x86: Booting SMP configuration: [ 7714.113637] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7714.116037] TSC synchronization [CPU#0 -> CPU#1]: [ 7714.116038] Measured 5889396083 cycles TSC warp between CPUs, turning off TSC clock. [ 7714.116044] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 7714.116064] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 7714.116065] sched_clock: Marking unstable (7714293687571, -179408176)<-(7714106923138, 9140442) [ 7715.848427] cache: parent cpu1 should not be sleeping [ 7714.116446] CPU1 is up [ 7715.846925] clocksource: Switched to clocksource hpet [ 7715.846926] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 7715.846926] cache: parent cpu2 should not be sleeping [ 7715.846926] CPU2 is up [ 7715.846926] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 7715.846926] cache: parent cpu3 should not be sleeping [ 7715.846926] CPU3 is up [ 7715.846926] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 7715.846926] cache: parent cpu4 should not be sleeping [ 7715.846926] CPU4 is up [ 7715.846926] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 7715.846926] cache: parent cpu5 should not be sleeping [ 7715.846926] CPU5 is up [ 7715.846926] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 7715.846926] cache: parent cpu6 should not be sleeping [ 7715.846926] CPU6 is up [ 7715.846926] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 7715.846926] cache: parent cpu7 should not be sleeping [ 7715.846926] CPU7 is up [ 7715.846926] ACPI: Waking up from system sleep state S3 [ 7715.846926] serial 00:05: activated [ 7715.846926] parport_pc 00:07: activated [ 7715.846926] sd 0:0:0:0: [sda] Starting disk [ 7715.846926] sd 4:0:0:0: [sdd] Starting disk [ 7715.846926] sd 3:0:0:0: [sdc] Starting disk [ 7715.846926] sd 1:0:0:0: [sdb] Starting disk [ 7715.846926] hub 4-3:1.0: hub_ext_port_status failed (err = -71) [ 7715.846926] r8169 0000:03:00.0 enp3s0: link down [ 7715.846926] usb 3-3: reset high-speed USB device number 2 using xhci_hcd [ 7715.846926] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7715.846926] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7715.846926] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7715.846926] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7715.846926] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 7715.846926] No Local Variables are initialized for Method [_GTF] [ 7715.846926] No Arguments are initialized for method [_GTF] [ 7715.846926] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 7715.846926] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 7715.846926] No Local Variables are initialized for Method [_GTF] [ 7715.846926] No Arguments are initialized for method [_GTF] [ 7715.846926] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 7715.846926] ata2.00: supports DRM functions and may not be fully accessible [ 7715.846926] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 7715.846926] No Local Variables are initialized for Method [_GTF] [ 7715.846926] No Arguments are initialized for method [_GTF] [ 7715.846926] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 7715.846926] ata4.00: supports DRM functions and may not be fully accessible [ 7715.846926] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 7715.846926] No Local Variables are initialized for Method [_GTF] [ 7715.846926] No Arguments are initialized for method [_GTF] [ 7715.846926] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 7715.846926] ata1.00: configured for UDMA/133 [ 7715.846926] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 7715.846926] No Local Variables are initialized for Method [_GTF] [ 7715.846926] No Arguments are initialized for method [_GTF] [ 7715.846926] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 7715.846926] ata2.00: supports DRM functions and may not be fully accessible [ 7715.846926] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 7715.846926] No Local Variables are initialized for Method [_GTF] [ 7715.846926] No Arguments are initialized for method [_GTF] [ 7715.846926] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 7715.846926] ata4.00: supports DRM functions and may not be fully accessible [ 7715.846926] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 7715.846926] No Local Variables are initialized for Method [_GTF] [ 7715.846926] No Arguments are initialized for method [_GTF] [ 7715.846926] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 7715.846926] ata2.00: configured for UDMA/133 [ 7715.846926] ata2.00: Enabling discard_zeroes_data [ 7715.846926] ata4.00: configured for UDMA/133 [ 7715.846926] ata4.00: Enabling discard_zeroes_data [ 7715.846926] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 7715.846926] No Local Variables are initialized for Method [_GTF] [ 7715.846926] No Arguments are initialized for method [_GTF] [ 7715.846926] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 7715.846926] ata6.00: configured for UDMA/100 [ 7715.846926] usb 3-3.1: reset high-speed USB device number 3 using xhci_hcd [ 7715.846926] usb 3-3.2: reset full-speed USB device number 4 using xhci_hcd [ 7715.846926] usb 3-3.1.3: reset full-speed USB device number 6 using xhci_hcd [ 7715.846926] usb 3-3.1.4: reset full-speed USB device number 7 using xhci_hcd [ 7715.846926] OOM killer enabled. [ 7715.846926] Restarting tasks ... [ 7715.846926] pci_bus 0000:05: Allocating resources [ 7715.846926] pci 0000:04:00.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [ 7715.846926] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000 [ 7715.846926] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000 [ 7715.846926] pci 0000:04:00.0: BAR 14: assigned [mem 0xcfa00000-0xcfbfffff] [ 7715.846926] pci 0000:04:00.0: BAR 15: assigned [mem 0xcfc00000-0xcfdfffff 64bit pref] [ 7715.846926] pci 0000:04:00.0: BAR 13: assigned [io 0x2000-0x2fff] [ 7715.846926] pci 0000:04:00.0: PCI bridge to [bus 05] [ 7715.846926] pci 0000:04:00.0: bridge window [io 0x2000-0x2fff] [ 7715.846926] pci 0000:04:00.0: bridge window [mem 0xcfa00000-0xcfbfffff] [ 7715.846926] pci 0000:04:00.0: bridge window [mem 0xcfc00000-0xcfdfffff 64bit pref] [ 7715.846926] usb 3-3.1.2: USB disconnect, device number 5 [ 7715.846926] done. [ 7715.846926] video LNXVIDEO:00: Restoring backlight state [ 7715.846926] usb 4-3-port1: device 4-3.1 not suspended yet [ 7715.846926] PM: suspend exit [ 7715.846926] usb 3-3.1.2: new high-speed USB device number 8 using xhci_hcd [ 7715.846926] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 7715.846926] usb 3-3.1.2: New USB device found, idVendor=05e3, idProduct=0608 [ 7715.846926] usb 3-3.1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7715.846926] usb 3-3.1.2: Product: USB2.0 Hub [ 7715.846926] hub 3-3.1.2:1.0: USB hub found [ 7715.846926] hub 3-3.1.2:1.0: 4 ports detected [ 7715.910700] r8169 0000:03:00.0 enp3s0: link down [ 7715.910777] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 7718.460682] r8169 0000:03:00.0 enp3s0: link up [ 7718.460694] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 7719.572646] ata5: link is slow to respond, please be patient (ready=0) [ 7724.192633] ata5: COMRESET failed (errno=-16) [ 7725.344653] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7725.469167] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 7725.469184] No Local Variables are initialized for Method [_GTF] [ 7725.469186] No Arguments are initialized for method [_GTF] [ 7725.469189] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 7725.503764] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 7725.503779] No Local Variables are initialized for Method [_GTF] [ 7725.503781] No Arguments are initialized for method [_GTF] [ 7725.503784] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 7725.503955] ata5.00: configured for UDMA/133 [10020.551880] FS-Cache: Loaded [10020.567260] FS-Cache: Netfs 'cifs' registered for caching [10020.567331] Key type cifs.spnego registered [10020.567333] Key type cifs.idmap registered [10026.696684] CIFS VFS: Error connecting to socket. Aborting operation. [10026.696690] CIFS VFS: cifs_mount failed w/return code = -113 [10032.840687] CIFS VFS: Error connecting to socket. Aborting operation. [10032.840693] CIFS VFS: cifs_mount failed w/return code = -113