[38417.724717] PM: late suspend of devices complete after 17.377 msecs
[38417.745242] PM: noirq suspend of devices complete after 20.518 msecs
[38417.745980] ACPI: Preparing to enter system sleep state S3
[38418.000465] ACPI: EC: event blocked
[38418.000466] ACPI: EC: EC stopped
[38418.000467] PM: Saving platform NVS memory
[38418.000498] Disabling non-boot CPUs ...
[38418.018815] smpboot: CPU 1 is now offline
[38418.042014] smpboot: CPU 2 is now offline
[38418.065921] smpboot: CPU 3 is now offline
[38418.068154] ACPI: Low-level resume complete
[38418.068233] ACPI: EC: EC started
[38418.068234] PM: Restoring platform NVS memory
[38418.068578] Suspended for 3.756 seconds
[38418.068649] Enabling non-boot CPUs ...
[38418.068741] x86: Booting SMP configuration:
[38418.068743] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38418.069479]  cache: parent cpu1 should not be sleeping
[38418.069694] CPU1 is up
[38418.069744] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38418.070389]  cache: parent cpu2 should not be sleeping
[38418.070634] CPU2 is up
[38418.070665] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38418.071299]  cache: parent cpu3 should not be sleeping
[38418.071648] CPU3 is up
[38418.076260] ACPI: Waking up from system sleep state S3
[38418.999735] PM: noirq resume of devices complete after 20.980 msecs
[38419.000569] PM: early resume of devices complete after 0.790 msecs
[38419.000741] ACPI: EC: event unblocked
[38419.006402] sd 0:0:0:0: [sda] Starting disk
[38419.067297] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38419.083825] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38419.100267] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38419.186774] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38419.266762] usb 1-1.8: device descriptor read/64, error -32
[38419.321691] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38419.322586] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38419.322591] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38419.324965] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38419.324970] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38419.326437] ata1.00: configured for UDMA/133
[38419.338917] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38419.454718] usb 1-1.8: device descriptor read/64, error -32
[38419.598912] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38419.642747] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38419.722745] usb 1-1.8: device descriptor read/64, error -32
[38419.859026] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38419.910751] usb 1-1.8: device descriptor read/64, error -32
[38420.098759] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38420.286719] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38420.320882] PM: resume of devices complete after 1320.325 msecs
[38420.321010] usb 2-4:1.0: rebind failed: -517
[38420.321016] usb 2-4:1.1: rebind failed: -517
[38420.321584] PM: Finishing wakeup.
[38420.321586] OOM killer enabled.
[38420.321588] Restarting tasks ... 
[38420.334667] Bluetooth: hci0: read Intel version: 370710018002030d00
[38420.334699] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38420.335467] done.
[38420.511715] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38420.743542] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38420.985908] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38421.071314] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38447.490998] PM: Syncing filesystems ... done.
[38447.508833] PM: Preparing system for sleep (mem)
[38447.509481] Freezing user space processes ... (elapsed 0.003 seconds) done.
[38447.512903] OOM killer disabled.
[38447.512905] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38447.514511] PM: Suspending system (mem)
[38447.514545] Suspending console(s) (use no_console_suspend to debug)
[38447.700331] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38447.701645] sd 0:0:0:0: [sda] Stopping disk
[38447.953260] PM: suspend of devices complete after 438.551 msecs
[38447.970389] PM: late suspend of devices complete after 17.119 msecs
[38447.991109] PM: noirq suspend of devices complete after 20.712 msecs
[38447.991848] ACPI: Preparing to enter system sleep state S3
[38448.246378] ACPI: EC: event blocked
[38448.246379] ACPI: EC: EC stopped
[38448.246381] PM: Saving platform NVS memory
[38448.246411] Disabling non-boot CPUs ...
[38448.264755] smpboot: CPU 1 is now offline
[38448.288717] smpboot: CPU 2 is now offline
[38448.311870] smpboot: CPU 3 is now offline
[38448.314125] ACPI: Low-level resume complete
[38448.314205] ACPI: EC: EC started
[38448.314205] PM: Restoring platform NVS memory
[38448.314550] Suspended for 2.755 seconds
[38448.314620] Enabling non-boot CPUs ...
[38448.314666] x86: Booting SMP configuration:
[38448.314668] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38448.315430]  cache: parent cpu1 should not be sleeping
[38448.315648] CPU1 is up
[38448.315731] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38448.316378]  cache: parent cpu2 should not be sleeping
[38448.316638] CPU2 is up
[38448.316675] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38448.317307]  cache: parent cpu3 should not be sleeping
[38448.317656] CPU3 is up
[38448.322269] ACPI: Waking up from system sleep state S3
[38449.245565] PM: noirq resume of devices complete after 20.901 msecs
[38449.246317] PM: early resume of devices complete after 0.713 msecs
[38449.246532] ACPI: EC: event unblocked
[38449.247053] sd 0:0:0:0: [sda] Starting disk
[38449.309455] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38449.326464] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38449.343406] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38449.400699] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38449.559422] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38449.560298] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38449.560302] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38449.562624] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38449.562628] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38449.564065] ata1.00: configured for UDMA/133
[38449.580916] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38449.588665] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38449.840867] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38450.100871] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38450.247807] PM: resume of devices complete after 1001.496 msecs
[38450.247912] usb 2-4:1.0: rebind failed: -517
[38450.247918] usb 2-4:1.1: rebind failed: -517
[38450.248209] PM: Finishing wakeup.
[38450.248211] OOM killer enabled.
[38450.248212] Restarting tasks ... done.
[38450.276424] Bluetooth: hci0: read Intel version: 370710018002030d00
[38450.276493] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38450.401456] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38450.633999] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38450.882431] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38450.961911] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38477.749375] PM: Syncing filesystems ... done.
[38477.767512] PM: Preparing system for sleep (mem)
[38477.768049] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38477.770945] OOM killer disabled.
[38477.770946] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38477.772554] PM: Suspending system (mem)
[38477.772605] Suspending console(s) (use no_console_suspend to debug)
[38477.963692] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38477.964677] sd 0:0:0:0: [sda] Stopping disk
[38478.215089] PM: suspend of devices complete after 442.219 msecs
[38478.232513] PM: late suspend of devices complete after 17.397 msecs
[38478.253087] PM: noirq suspend of devices complete after 20.563 msecs
[38478.253825] ACPI: Preparing to enter system sleep state S3
[38478.508293] ACPI: EC: event blocked
[38478.508294] ACPI: EC: EC stopped
[38478.508295] PM: Saving platform NVS memory
[38478.508326] Disabling non-boot CPUs ...
[38478.526662] smpboot: CPU 1 is now offline
[38478.550611] smpboot: CPU 2 is now offline
[38478.573768] smpboot: CPU 3 is now offline
[38478.576036] ACPI: Low-level resume complete
[38478.576116] ACPI: EC: EC started
[38478.576116] PM: Restoring platform NVS memory
[38478.576463] Suspended for 3.740 seconds
[38478.576517] Enabling non-boot CPUs ...
[38478.576611] x86: Booting SMP configuration:
[38478.576612] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38478.577356]  cache: parent cpu1 should not be sleeping
[38478.577575] CPU1 is up
[38478.577623] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38478.578269]  cache: parent cpu2 should not be sleeping
[38478.578512] CPU2 is up
[38478.578561] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38478.579192]  cache: parent cpu3 should not be sleeping
[38478.579539] CPU3 is up
[38478.584148] ACPI: Waking up from system sleep state S3
[38479.507587] PM: noirq resume of devices complete after 21.011 msecs
[38479.508491] PM: early resume of devices complete after 0.862 msecs
[38479.508685] ACPI: EC: event unblocked
[38479.509598] sd 0:0:0:0: [sda] Starting disk
[38479.570902] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38479.587346] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38479.603698] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38479.662597] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38479.742580] usb 1-1.8: device descriptor read/64, error -32
[38479.821575] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38479.822459] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38479.822463] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38479.824875] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38479.824880] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38479.826305] ata1.00: configured for UDMA/133
[38479.842793] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38479.930559] usb 1-1.8: device descriptor read/64, error -32
[38480.102750] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38480.118581] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38480.198582] usb 1-1.8: device descriptor read/64, error -32
[38480.362808] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38480.386574] usb 1-1.8: device descriptor read/64, error -32
[38480.574592] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38480.762530] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38480.796560] PM: resume of devices complete after 1288.079 msecs
[38480.796667] usb 2-4:1.0: rebind failed: -517
[38480.796672] usb 2-4:1.1: rebind failed: -517
[38480.797141] PM: Finishing wakeup.
[38480.797142] OOM killer enabled.
[38480.797144] Restarting tasks ... 
[38480.809608] Bluetooth: hci0: read Intel version: 370710018002030d00
[38480.809615] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38480.811206] done.
[38480.992631] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38481.168756] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38481.407664] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38481.476685] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38507.997524] PM: Syncing filesystems ... done.
[38508.018218] PM: Preparing system for sleep (mem)
[38508.018646] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38508.021245] OOM killer disabled.
[38508.021245] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38508.022461] PM: Suspending system (mem)
[38508.022508] Suspending console(s) (use no_console_suspend to debug)
[38508.206827] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38508.207933] sd 0:0:0:0: [sda] Stopping disk
[38508.461105] PM: suspend of devices complete after 438.334 msecs
[38508.478198] PM: late suspend of devices complete after 17.084 msecs
[38508.498858] PM: noirq suspend of devices complete after 20.652 msecs
[38508.499597] ACPI: Preparing to enter system sleep state S3
[38508.754207] ACPI: EC: event blocked
[38508.754208] ACPI: EC: EC stopped
[38508.754210] PM: Saving platform NVS memory
[38508.754240] Disabling non-boot CPUs ...
[38508.771846] smpboot: CPU 1 is now offline
[38508.795839] smpboot: CPU 2 is now offline
[38508.819690] smpboot: CPU 3 is now offline
[38508.821880] ACPI: Low-level resume complete
[38508.821959] ACPI: EC: EC started
[38508.821960] PM: Restoring platform NVS memory
[38508.822306] Suspended for 2.756 seconds
[38508.822367] Enabling non-boot CPUs ...
[38508.822413] x86: Booting SMP configuration:
[38508.822414] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38508.823162]  cache: parent cpu1 should not be sleeping
[38508.823381] CPU1 is up
[38508.823473] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38508.824119]  cache: parent cpu2 should not be sleeping
[38508.824363] CPU2 is up
[38508.824397] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38508.825029]  cache: parent cpu3 should not be sleeping
[38508.825381] CPU3 is up
[38508.830000] ACPI: Waking up from system sleep state S3
[38509.753692] PM: noirq resume of devices complete after 21.204 msecs
[38509.754459] PM: early resume of devices complete after 0.724 msecs
[38509.754610] ACPI: EC: event unblocked
[38509.755367] sd 0:0:0:0: [sda] Starting disk
[38509.816911] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38509.833401] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38509.849865] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38509.900503] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38510.067433] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38510.068308] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38510.068312] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38510.070673] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38510.070677] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38510.072115] ata1.00: configured for UDMA/133
[38510.088499] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38510.088655] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38510.348718] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38510.608681] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38510.755438] PM: resume of devices complete after 1000.986 msecs
[38510.755550] usb 2-4:1.0: rebind failed: -517
[38510.755555] usb 2-4:1.1: rebind failed: -517
[38510.756012] PM: Finishing wakeup.
[38510.756014] OOM killer enabled.
[38510.756015] Restarting tasks ... 
[38510.772442] Bluetooth: hci0: read Intel version: 370710018002030d00
[38510.772575] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38510.773969] done.
[38510.961859] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38511.195989] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38511.436733] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38511.513546] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38538.259054] PM: Syncing filesystems ... done.
[38538.279598] PM: Preparing system for sleep (mem)
[38538.280095] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38538.282741] OOM killer disabled.
[38538.282741] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38538.284230] PM: Suspending system (mem)
[38538.284264] Suspending console(s) (use no_console_suspend to debug)
[38538.470357] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38538.471585] sd 0:0:0:0: [sda] Stopping disk
[38538.722972] PM: suspend of devices complete after 438.543 msecs
[38538.740137] PM: late suspend of devices complete after 17.156 msecs
[38538.760833] PM: noirq suspend of devices complete after 20.688 msecs
[38538.761572] ACPI: Preparing to enter system sleep state S3
[38539.016118] ACPI: EC: event blocked
[38539.016119] ACPI: EC: EC stopped
[38539.016120] PM: Saving platform NVS memory
[38539.016151] Disabling non-boot CPUs ...
[38539.034478] smpboot: CPU 1 is now offline
[38539.057726] smpboot: CPU 2 is now offline
[38539.081599] smpboot: CPU 3 is now offline
[38539.083861] ACPI: Low-level resume complete
[38539.083941] ACPI: EC: EC started
[38539.083942] PM: Restoring platform NVS memory
[38539.084288] Suspended for 2.739 seconds
[38539.084338] Enabling non-boot CPUs ...
[38539.084424] x86: Booting SMP configuration:
[38539.084425] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38539.085170]  cache: parent cpu1 should not be sleeping
[38539.085387] CPU1 is up
[38539.085437] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38539.086084]  cache: parent cpu2 should not be sleeping
[38539.086331] CPU2 is up
[38539.086378] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38539.087010]  cache: parent cpu3 should not be sleeping
[38539.087360] CPU3 is up
[38539.091969] ACPI: Waking up from system sleep state S3
[38540.015336] PM: noirq resume of devices complete after 20.912 msecs
[38540.016260] PM: early resume of devices complete after 0.878 msecs
[38540.016435] ACPI: EC: event unblocked
[38540.017166] sd 0:0:0:0: [sda] Starting disk
[38540.078620] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38540.095228] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38540.111878] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38540.170431] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38540.250421] usb 1-1.8: device descriptor read/64, error -32
[38540.329422] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38540.330308] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38540.330311] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38540.332701] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38540.332705] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38540.334150] ata1.00: configured for UDMA/133
[38540.350604] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38540.438382] usb 1-1.8: device descriptor read/64, error -32
[38540.610567] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38540.626402] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38540.706389] usb 1-1.8: device descriptor read/64, error -32
[38540.870588] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38540.894385] usb 1-1.8: device descriptor read/64, error -32
[38541.082423] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38541.270386] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38541.304267] PM: resume of devices complete after 1288.018 msecs
[38541.304360] usb 2-4:1.0: rebind failed: -517
[38541.304366] usb 2-4:1.1: rebind failed: -517
[38541.304644] PM: Finishing wakeup.
[38541.304646] OOM killer enabled.
[38541.304647] Restarting tasks ... done.
[38541.336349] Bluetooth: hci0: read Intel version: 370710018002030d00
[38541.336356] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38541.527398] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38541.685589] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38541.935690] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38542.033230] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38568.500634] PM: Syncing filesystems ... done.
[38568.533525] PM: Preparing system for sleep (mem)
[38568.534119] Freezing user space processes ... (elapsed 0.003 seconds) done.
[38568.537176] OOM killer disabled.
[38568.537177] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38568.538725] PM: Suspending system (mem)
[38568.538769] Suspending console(s) (use no_console_suspend to debug)
[38568.713506] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38568.714741] sd 0:0:0:0: [sda] Stopping disk
[38568.964905] PM: suspend of devices complete after 425.914 msecs
[38568.982181] PM: late suspend of devices complete after 17.266 msecs
[38569.002836] PM: noirq suspend of devices complete after 20.647 msecs
[38569.003573] ACPI: Preparing to enter system sleep state S3
[38569.258035] ACPI: EC: event blocked
[38569.258036] ACPI: EC: EC stopped
[38569.258037] PM: Saving platform NVS memory
[38569.258071] Disabling non-boot CPUs ...
[38569.276415] smpboot: CPU 1 is now offline
[38569.319595] smpboot: CPU 2 is now offline
[38569.343510] smpboot: CPU 3 is now offline
[38569.345782] ACPI: Low-level resume complete
[38569.345861] ACPI: EC: EC started
[38569.345862] PM: Restoring platform NVS memory
[38569.346206] Suspended for 3.739 seconds
[38569.346260] Enabling non-boot CPUs ...
[38569.346305] x86: Booting SMP configuration:
[38569.346307] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38569.347043]  cache: parent cpu1 should not be sleeping
[38569.347260] CPU1 is up
[38569.347352] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38569.347998]  cache: parent cpu2 should not be sleeping
[38569.348247] CPU2 is up
[38569.348296] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38569.348929]  cache: parent cpu3 should not be sleeping
[38569.349275] CPU3 is up
[38569.353889] ACPI: Waking up from system sleep state S3
[38570.277285] PM: noirq resume of devices complete after 20.971 msecs
[38570.278106] PM: early resume of devices complete after 0.779 msecs
[38570.278292] ACPI: EC: event unblocked
[38570.278996] sd 0:0:0:0: [sda] Starting disk
[38570.340899] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38570.357427] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38570.373869] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38570.460335] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38570.591352] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38570.592219] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38570.592223] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38570.594517] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38570.594521] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38570.595961] ata1.00: configured for UDMA/133
[38570.612480] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38570.648334] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38570.872488] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38571.132495] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38571.279233] PM: resume of devices complete after 1001.135 msecs
[38571.279329] usb 2-4:1.0: rebind failed: -517
[38571.279334] usb 2-4:1.1: rebind failed: -517
[38571.279725] PM: Finishing wakeup.
[38571.279726] OOM killer enabled.
[38571.279727] Restarting tasks ... 
[38571.292235] Bluetooth: hci0: read Intel version: 370710018002030d00
[38571.292380] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38571.304287] done.
[38571.473254] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38571.669008] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38571.912700] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38571.974382] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38598.765694] PM: Syncing filesystems ... done.
[38598.783664] PM: Preparing system for sleep (mem)
[38598.784151] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38598.786602] OOM killer disabled.
[38598.786603] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38598.788079] PM: Suspending system (mem)
[38598.788113] Suspending console(s) (use no_console_suspend to debug)
[38598.968874] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38598.970178] sd 0:0:0:0: [sda] Stopping disk
[38599.222803] PM: suspend of devices complete after 434.526 msecs
[38599.240184] PM: late suspend of devices complete after 17.368 msecs
[38599.260721] PM: noirq suspend of devices complete after 20.527 msecs
[38599.261459] ACPI: Preparing to enter system sleep state S3
[38599.515945] ACPI: EC: event blocked
[38599.515947] ACPI: EC: EC stopped
[38599.515948] PM: Saving platform NVS memory
[38599.515978] Disabling non-boot CPUs ...
[38599.534323] smpboot: CPU 1 is now offline
[38599.553507] smpboot: CPU 2 is now offline
[38599.577400] smpboot: CPU 3 is now offline
[38599.579627] ACPI: Low-level resume complete
[38599.579707] ACPI: EC: EC started
[38599.579708] PM: Restoring platform NVS memory
[38599.580053] Suspended for 2.768 seconds
[38599.580102] Enabling non-boot CPUs ...
[38599.580196] x86: Booting SMP configuration:
[38599.580197] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38599.580938]  cache: parent cpu1 should not be sleeping
[38599.581157] CPU1 is up
[38599.581198] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38599.581843]  cache: parent cpu2 should not be sleeping
[38599.582092] CPU2 is up
[38599.582125] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38599.582758]  cache: parent cpu3 should not be sleeping
[38599.583107] CPU3 is up
[38599.587708] ACPI: Waking up from system sleep state S3
[38600.510982] PM: noirq resume of devices complete after 20.750 msecs
[38600.511765] PM: early resume of devices complete after 0.739 msecs
[38600.511953] ACPI: EC: event unblocked
[38600.512825] sd 0:0:0:0: [sda] Starting disk
[38600.574802] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38600.591719] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38600.608649] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38600.658240] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38600.738192] usb 1-1.8: device descriptor read/64, error -32
[38600.825125] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38600.826010] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38600.826014] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38600.828431] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38600.828435] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38600.829857] ata1.00: configured for UDMA/133
[38600.846455] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38600.926214] usb 1-1.8: device descriptor read/64, error -32
[38601.106431] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38601.114227] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38601.194223] usb 1-1.8: device descriptor read/64, error -32
[38601.366421] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38601.382224] usb 1-1.8: device descriptor read/64, error -32
[38601.570238] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38601.758204] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38601.792614] PM: resume of devices complete after 1280.860 msecs
[38601.792719] usb 2-4:1.0: rebind failed: -517
[38601.792724] usb 2-4:1.1: rebind failed: -517
[38601.793205] PM: Finishing wakeup.
[38601.793206] OOM killer enabled.
[38601.793208] Restarting tasks ... 
[38601.806954] Bluetooth: hci0: read Intel version: 370710018002030d00
[38601.806961] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38601.814582] done.
[38601.988000] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38602.216875] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38602.466719] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38602.557776] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38629.013205] PM: Syncing filesystems ... done.
[38629.030603] PM: Preparing system for sleep (mem)
[38629.031011] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38629.033569] OOM killer disabled.
[38629.033570] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38629.035049] PM: Suspending system (mem)
[38629.035085] Suspending console(s) (use no_console_suspend to debug)
[38629.224815] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38629.226159] sd 0:0:0:0: [sda] Stopping disk
[38629.499144] PM: suspend of devices complete after 463.892 msecs
[38629.517873] PM: late suspend of devices complete after 18.724 msecs
[38629.538571] PM: noirq suspend of devices complete after 20.691 msecs
[38629.539227] ACPI: Preparing to enter system sleep state S3
[38629.793862] ACPI: EC: event blocked
[38629.793864] ACPI: EC: EC stopped
[38629.793865] PM: Saving platform NVS memory
[38629.793893] Disabling non-boot CPUs ...
[38629.811450] smpboot: CPU 1 is now offline
[38629.836190] smpboot: CPU 2 is now offline
[38629.859335] smpboot: CPU 3 is now offline
[38629.861606] ACPI: Low-level resume complete
[38629.861685] ACPI: EC: EC started
[38629.861685] PM: Restoring platform NVS memory
[38629.862030] Suspended for 3.719 seconds
[38629.862080] Enabling non-boot CPUs ...
[38629.862177] x86: Booting SMP configuration:
[38629.862178] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38629.862925]  cache: parent cpu1 should not be sleeping
[38629.863141] CPU1 is up
[38629.863188] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38629.863835]  cache: parent cpu2 should not be sleeping
[38629.864083] CPU2 is up
[38629.864133] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38629.864764]  cache: parent cpu3 should not be sleeping
[38629.865121] CPU3 is up
[38629.869719] ACPI: Waking up from system sleep state S3
[38630.793183] PM: noirq resume of devices complete after 21.046 msecs
[38630.793986] PM: early resume of devices complete after 0.759 msecs
[38630.794173] ACPI: EC: event unblocked
[38630.794809] sd 0:0:0:0: [sda] Starting disk
[38630.857002] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38630.873989] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38630.890899] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38630.948167] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38631.106973] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38631.107857] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38631.107861] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38631.110326] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38631.110331] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38631.111763] ata1.00: configured for UDMA/133
[38631.128313] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38631.136155] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38631.388270] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38631.648368] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38631.794370] PM: resume of devices complete after 1000.392 msecs
[38631.794464] usb 2-4:1.0: rebind failed: -517
[38631.794468] usb 2-4:1.1: rebind failed: -517
[38631.794850] PM: Finishing wakeup.
[38631.794852] OOM killer enabled.
[38631.794853] Restarting tasks ... 
[38631.807148] Bluetooth: hci0: read Intel version: 370710018002030d00
[38631.807282] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38631.826364] done.
[38631.988191] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38632.180549] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38632.417238] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38632.500613] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38659.265643] PM: Syncing filesystems ... done.
[38659.283404] PM: Preparing system for sleep (mem)
[38659.284017] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38659.286920] OOM killer disabled.
[38659.286921] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[38659.287907] PM: Suspending system (mem)
[38659.287941] Suspending console(s) (use no_console_suspend to debug)
[38659.480767] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38659.482101] sd 0:0:0:0: [sda] Stopping disk
[38659.734616] PM: suspend of devices complete after 446.511 msecs
[38659.752004] PM: late suspend of devices complete after 17.378 msecs
[38659.772428] PM: noirq suspend of devices complete after 20.415 msecs
[38659.773173] ACPI: Preparing to enter system sleep state S3
[38660.027767] ACPI: EC: event blocked
[38660.027769] ACPI: EC: EC stopped
[38660.027770] PM: Saving platform NVS memory
[38660.027804] Disabling non-boot CPUs ...
[38660.046135] smpboot: CPU 1 is now offline
[38660.069332] smpboot: CPU 2 is now offline
[38660.085254] smpboot: CPU 3 is now offline
[38660.087504] ACPI: Low-level resume complete
[38660.087584] ACPI: EC: EC started
[38660.087584] PM: Restoring platform NVS memory
[38660.087931] Suspended for 2.776 seconds
[38660.087980] Enabling non-boot CPUs ...
[38660.088083] x86: Booting SMP configuration:
[38660.088084] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38660.088827]  cache: parent cpu1 should not be sleeping
[38660.089044] CPU1 is up
[38660.089087] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38660.089734]  cache: parent cpu2 should not be sleeping
[38660.089980] CPU2 is up
[38660.090025] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38660.090659]  cache: parent cpu3 should not be sleeping
[38660.091013] CPU3 is up
[38660.095625] ACPI: Waking up from system sleep state S3
[38661.018982] PM: noirq resume of devices complete after 20.922 msecs
[38661.019765] PM: early resume of devices complete after 0.740 msecs
[38661.019935] ACPI: EC: event unblocked
[38661.020594] sd 0:0:0:0: [sda] Starting disk
[38661.082139] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38661.098199] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38661.114252] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38661.198076] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38661.332905] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38661.333779] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38661.333782] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38661.336198] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38661.336201] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38661.337648] ata1.00: configured for UDMA/133
[38661.350248] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38661.386050] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38661.610235] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38661.870306] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38662.026206] PM: resume of devices complete after 1006.448 msecs
[38662.026321] usb 2-4:1.0: rebind failed: -517
[38662.026327] usb 2-4:1.1: rebind failed: -517
[38662.026831] PM: Finishing wakeup.
[38662.026834] OOM killer enabled.
[38662.026836] Restarting tasks ... 
[38662.039894] Bluetooth: hci0: read Intel version: 370710018002030d00
[38662.039901] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38662.050870] done.
[38662.228903] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38662.466969] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38662.716156] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38662.795367] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38689.526555] PM: Syncing filesystems ... done.
[38689.545476] PM: Preparing system for sleep (mem)
[38689.546176] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38689.549162] OOM killer disabled.
[38689.549163] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38689.550605] PM: Suspending system (mem)
[38689.550639] Suspending console(s) (use no_console_suspend to debug)
[38689.557938] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38689.559206] sd 0:0:0:0: [sda] Stopping disk
[38689.806996] PM: suspend of devices complete after 256.192 msecs
[38689.825707] PM: late suspend of devices complete after 18.705 msecs
[38689.846411] PM: noirq suspend of devices complete after 20.695 msecs
[38689.847067] ACPI: Preparing to enter system sleep state S3
[38690.101694] ACPI: EC: event blocked
[38690.101696] ACPI: EC: EC stopped
[38690.101697] PM: Saving platform NVS memory
[38690.101724] Disabling non-boot CPUs ...
[38690.120076] smpboot: CPU 1 is now offline
[38690.139269] smpboot: CPU 2 is now offline
[38690.163165] smpboot: CPU 3 is now offline
[38690.165439] ACPI: Low-level resume complete
[38690.165518] ACPI: EC: EC started
[38690.165519] PM: Restoring platform NVS memory
[38690.165864] Suspended for 2.923 seconds
[38690.165913] Enabling non-boot CPUs ...
[38690.166002] x86: Booting SMP configuration:
[38690.166003] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38690.166746]  cache: parent cpu1 should not be sleeping
[38690.166961] CPU1 is up
[38690.167011] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38690.167658]  cache: parent cpu2 should not be sleeping
[38690.167903] CPU2 is up
[38690.167959] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38690.168591]  cache: parent cpu3 should not be sleeping
[38690.168942] CPU3 is up
[38690.173567] ACPI: Waking up from system sleep state S3
[38691.096987] PM: noirq resume of devices complete after 21.011 msecs
[38691.097816] PM: early resume of devices complete after 0.784 msecs
[38691.097986] ACPI: EC: event unblocked
[38691.098920] sd 0:0:0:0: [sda] Starting disk
[38691.160120] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38691.176256] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38691.192324] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38691.279998] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38691.359993] usb 1-1.8: device descriptor read/64, error -32
[38691.411040] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38691.411925] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38691.411929] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38691.414350] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38691.414355] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38691.415817] ata1.00: configured for UDMA/133
[38691.428162] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38691.547952] usb 1-1.8: device descriptor read/64, error -32
[38691.688136] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38691.735955] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38691.815964] usb 1-1.8: device descriptor read/64, error -32
[38691.948145] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38692.003953] usb 1-1.8: device descriptor read/64, error -32
[38692.191972] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38692.379948] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38692.413506] PM: resume of devices complete after 1315.702 msecs
[38692.413577] usb 2-4:1.0: rebind failed: -517
[38692.413582] usb 2-4:1.1: rebind failed: -517
[38692.413804] PM: Finishing wakeup.
[38692.413805] OOM killer enabled.
[38692.413806] Restarting tasks ... done.
[38692.445002] Bluetooth: hci0: read Intel version: 370710018002030d00
[38692.445063] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38692.637012] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38692.825399] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38693.070537] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38693.150561] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38693.234470] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[38693.514563] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input539
[38719.771655] PM: Syncing filesystems ... done.
[38719.790089] PM: Preparing system for sleep (mem)
[38719.790518] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38719.792946] OOM killer disabled.
[38719.792947] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38719.794388] PM: Suspending system (mem)
[38719.794421] Suspending console(s) (use no_console_suspend to debug)
[38719.977456] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38719.978741] sd 0:0:0:0: [sda] Stopping disk
[38720.228660] PM: suspend of devices complete after 434.076 msecs
[38720.247593] PM: late suspend of devices complete after 18.927 msecs
[38720.268271] PM: noirq suspend of devices complete after 20.672 msecs
[38720.268927] ACPI: Preparing to enter system sleep state S3
[38720.523604] ACPI: EC: event blocked
[38720.523605] ACPI: EC: EC stopped
[38720.523606] PM: Saving platform NVS memory
[38720.523634] Disabling non-boot CPUs ...
[38720.541176] smpboot: CPU 1 is now offline
[38720.565207] smpboot: CPU 2 is now offline
[38720.589069] smpboot: CPU 3 is now offline
[38720.591354] ACPI: Low-level resume complete
[38720.591433] ACPI: EC: EC started
[38720.591433] PM: Restoring platform NVS memory
[38720.591777] Suspended for 3.575 seconds
[38720.591828] Enabling non-boot CPUs ...
[38720.591875] x86: Booting SMP configuration:
[38720.591876] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38720.592622]  cache: parent cpu1 should not be sleeping
[38720.592841] CPU1 is up
[38720.592913] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38720.593558]  cache: parent cpu2 should not be sleeping
[38720.593800] CPU2 is up
[38720.593870] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38720.594502]  cache: parent cpu3 should not be sleeping
[38720.594852] CPU3 is up
[38720.599469] ACPI: Waking up from system sleep state S3
[38721.522932] PM: noirq resume of devices complete after 21.052 msecs
[38721.523688] PM: early resume of devices complete after 0.712 msecs
[38721.523860] ACPI: EC: event unblocked
[38721.524477] sd 0:0:0:0: [sda] Starting disk
[38721.586063] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38721.602199] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38721.618266] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38721.705919] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38721.785900] usb 1-1.8: device descriptor read/64, error -32
[38721.836688] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38721.837579] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38721.837583] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38721.839980] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38721.839983] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38721.841483] ata1.00: configured for UDMA/133
[38721.854077] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38721.973872] usb 1-1.8: device descriptor read/64, error -32
[38722.114087] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38722.161876] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38722.241873] usb 1-1.8: device descriptor read/64, error -32
[38722.374117] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38722.429872] usb 1-1.8: device descriptor read/64, error -32
[38722.617883] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38722.805868] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38722.840592] PM: resume of devices complete after 1316.914 msecs
[38722.840688] usb 2-4:1.0: rebind failed: -517
[38722.840694] usb 2-4:1.1: rebind failed: -517
[38722.840978] PM: Finishing wakeup.
[38722.840980] OOM killer enabled.
[38722.840981] Restarting tasks ... done.
[38722.874785] Bluetooth: hci0: read Intel version: 370710018002030d00
[38722.874792] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38723.057862] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38723.223375] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38723.472980] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38723.547435] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38750.020585] PM: Syncing filesystems ... done.
[38750.037957] PM: Preparing system for sleep (mem)
[38750.038347] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38750.040834] OOM killer disabled.
[38750.040835] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38750.042297] PM: Suspending system (mem)
[38750.042332] Suspending console(s) (use no_console_suspend to debug)
[38750.221826] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38750.223139] sd 0:0:0:0: [sda] Stopping disk
[38750.471922] PM: suspend of devices complete after 429.424 msecs
[38750.489528] PM: late suspend of devices complete after 17.596 msecs
[38750.510307] PM: noirq suspend of devices complete after 20.773 msecs
[38750.511045] ACPI: Preparing to enter system sleep state S3
[38750.765510] ACPI: EC: event blocked
[38750.765512] ACPI: EC: EC stopped
[38750.765513] PM: Saving platform NVS memory
[38750.765543] Disabling non-boot CPUs ...
[38750.783906] smpboot: CPU 1 is now offline
[38750.803084] smpboot: CPU 2 is now offline
[38750.826988] smpboot: CPU 3 is now offline
[38750.829304] ACPI: Low-level resume complete
[38750.829383] ACPI: EC: EC started
[38750.829384] PM: Restoring platform NVS memory
[38750.829729] Suspended for 2.763 seconds
[38750.829792] Enabling non-boot CPUs ...
[38750.829886] x86: Booting SMP configuration:
[38750.829888] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38750.830651]  cache: parent cpu1 should not be sleeping
[38750.830869] CPU1 is up
[38750.830911] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38750.831557]  cache: parent cpu2 should not be sleeping
[38750.831835] CPU2 is up
[38750.831867] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38750.832498]  cache: parent cpu3 should not be sleeping
[38750.832845] CPU3 is up
[38750.837457] ACPI: Waking up from system sleep state S3
[38751.760859] PM: noirq resume of devices complete after 21.060 msecs
[38751.761621] PM: early resume of devices complete after 0.718 msecs
[38751.761794] ACPI: EC: event unblocked
[38751.762517] sd 0:0:0:0: [sda] Starting disk
[38751.823870] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38751.839900] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38751.855853] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38751.943831] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38752.023837] usb 1-1.8: device descriptor read/64, error -32
[38752.074929] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38752.075804] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38752.075811] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38752.078233] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38752.078236] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38752.079656] ata1.00: configured for UDMA/133
[38752.092011] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38752.211803] usb 1-1.8: device descriptor read/64, error -32
[38752.351985] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38752.399799] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38752.479804] usb 1-1.8: device descriptor read/64, error -32
[38752.612059] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38752.667806] usb 1-1.8: device descriptor read/64, error -32
[38752.855872] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38753.043796] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38753.078948] PM: resume of devices complete after 1317.336 msecs
[38753.079089] usb 2-4:1.0: rebind failed: -517
[38753.079096] usb 2-4:1.1: rebind failed: -517
[38753.079758] PM: Finishing wakeup.
[38753.079760] OOM killer enabled.
[38753.079761] Restarting tasks ... 
[38753.092786] Bluetooth: hci0: read Intel version: 370710018002030d00
[38753.092917] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38753.111748] done.
[38753.227781] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38753.467641] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38753.716575] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38753.788480] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38780.276579] PM: Syncing filesystems ... done.
[38780.297076] PM: Preparing system for sleep (mem)
[38780.297561] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38780.300313] OOM killer disabled.
[38780.300314] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38780.301820] PM: Suspending system (mem)
[38780.301858] Suspending console(s) (use no_console_suspend to debug)
[38780.481412] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38780.482762] sd 0:0:0:0: [sda] Stopping disk
[38780.734393] PM: suspend of devices complete after 432.345 msecs
[38780.751643] PM: late suspend of devices complete after 17.240 msecs
[38780.772208] PM: noirq suspend of devices complete after 20.557 msecs
[38780.772946] ACPI: Preparing to enter system sleep state S3
[38781.027434] ACPI: EC: event blocked
[38781.027435] ACPI: EC: EC stopped
[38781.027437] PM: Saving platform NVS memory
[38781.027471] Disabling non-boot CPUs ...
[38781.045808] smpboot: CPU 1 is now offline
[38781.064993] smpboot: CPU 2 is now offline
[38781.088888] smpboot: CPU 3 is now offline
[38781.091157] ACPI: Low-level resume complete
[38781.091236] ACPI: EC: EC started
[38781.091237] PM: Restoring platform NVS memory
[38781.091581] Suspended for 3.740 seconds
[38781.091647] Enabling non-boot CPUs ...
[38781.091694] x86: Booting SMP configuration:
[38781.091695] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38781.092439]  cache: parent cpu1 should not be sleeping
[38781.092655] CPU1 is up
[38781.092750] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38781.093397]  cache: parent cpu2 should not be sleeping
[38781.093639] CPU2 is up
[38781.093688] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38781.094322]  cache: parent cpu3 should not be sleeping
[38781.094671] CPU3 is up
[38781.099286] ACPI: Waking up from system sleep state S3
[38782.022762] PM: noirq resume of devices complete after 21.041 msecs
[38782.023582] PM: early resume of devices complete after 0.777 msecs
[38782.023771] ACPI: EC: event unblocked
[38782.024654] sd 0:0:0:0: [sda] Starting disk
[38782.086152] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38782.102926] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38782.119844] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38782.169737] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38782.340622] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38782.341508] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38782.341512] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38782.343930] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38782.343934] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38782.345310] ata1.00: configured for UDMA/133
[38782.357711] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38782.357900] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38782.617871] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38782.877926] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38783.024284] PM: resume of devices complete after 1000.709 msecs
[38783.024421] usb 2-4:1.0: rebind failed: -517
[38783.024427] usb 2-4:1.1: rebind failed: -517
[38783.024996] PM: Finishing wakeup.
[38783.024999] OOM killer enabled.
[38783.025001] Restarting tasks ... 
[38783.041831] Bluetooth: hci0: read Intel version: 370710018002030d00
[38783.041838] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38783.047211] done.
[38783.228812] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38783.414818] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38783.661286] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38783.738558] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38810.523350] PM: Syncing filesystems ... done.
[38810.542044] PM: Preparing system for sleep (mem)
[38810.542443] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38810.544961] OOM killer disabled.
[38810.544961] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38810.546397] PM: Suspending system (mem)
[38810.546430] Suspending console(s) (use no_console_suspend to debug)
[38810.725018] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38810.726162] sd 0:0:0:0: [sda] Stopping disk
[38810.974653] PM: suspend of devices complete after 428.058 msecs
[38810.993363] PM: late suspend of devices complete after 18.704 msecs
[38811.014133] PM: noirq suspend of devices complete after 20.764 msecs
[38811.014871] ACPI: Preparing to enter system sleep state S3
[38811.269344] ACPI: EC: event blocked
[38811.269346] ACPI: EC: EC stopped
[38811.269347] PM: Saving platform NVS memory
[38811.269377] Disabling non-boot CPUs ...
[38811.287729] smpboot: CPU 1 is now offline
[38811.306921] smpboot: CPU 2 is now offline
[38811.330828] smpboot: CPU 3 is now offline
[38811.333077] ACPI: Low-level resume complete
[38811.333157] ACPI: EC: EC started
[38811.333157] PM: Restoring platform NVS memory
[38811.333501] Suspended for 2.759 seconds
[38811.333555] Enabling non-boot CPUs ...
[38811.333648] x86: Booting SMP configuration:
[38811.333650] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38811.334393]  cache: parent cpu1 should not be sleeping
[38811.334610] CPU1 is up
[38811.334652] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38811.335298]  cache: parent cpu2 should not be sleeping
[38811.335543] CPU2 is up
[38811.335575] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38811.336214]  cache: parent cpu3 should not be sleeping
[38811.336566] CPU3 is up
[38811.341174] ACPI: Waking up from system sleep state S3
[38812.264663] PM: noirq resume of devices complete after 21.029 msecs
[38812.265443] PM: early resume of devices complete after 0.736 msecs
[38812.265613] ACPI: EC: event unblocked
[38812.266515] sd 0:0:0:0: [sda] Starting disk
[38812.327831] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38812.344003] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38812.360177] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38812.411654] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38812.578561] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38812.579426] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38812.579429] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38812.581808] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38812.581813] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38812.583248] ata1.00: configured for UDMA/133
[38812.595788] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38812.599609] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38812.855798] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38813.115829] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38813.261949] PM: resume of devices complete after 996.513 msecs
[38813.262060] usb 2-4:1.0: rebind failed: -517
[38813.262065] usb 2-4:1.1: rebind failed: -517
[38813.262523] PM: Finishing wakeup.
[38813.262526] OOM killer enabled.
[38813.262527] Restarting tasks ... done.
[38813.289308] Bluetooth: hci0: read Intel version: 370710018002030d00
[38813.289436] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38813.493681] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38813.685455] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38813.936190] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38814.003431] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38840.772054] PM: Syncing filesystems ... done.
[38840.789964] PM: Preparing system for sleep (mem)
[38840.790377] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38840.792909] OOM killer disabled.
[38840.792909] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38840.794346] PM: Suspending system (mem)
[38840.794381] Suspending console(s) (use no_console_suspend to debug)
[38840.968599] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38840.969844] sd 0:0:0:0: [sda] Stopping disk
[38841.220295] PM: suspend of devices complete after 425.749 msecs
[38841.239277] PM: late suspend of devices complete after 18.975 msecs
[38841.260022] PM: noirq suspend of devices complete after 20.739 msecs
[38841.260760] ACPI: Preparing to enter system sleep state S3
[38841.515261] ACPI: EC: event blocked
[38841.515262] ACPI: EC: EC stopped
[38841.515264] PM: Saving platform NVS memory
[38841.515294] Disabling non-boot CPUs ...
[38841.533606] smpboot: CPU 1 is now offline
[38841.557572] smpboot: CPU 2 is now offline
[38841.580734] smpboot: CPU 3 is now offline
[38841.582966] ACPI: Low-level resume complete
[38841.583046] ACPI: EC: EC started
[38841.583046] PM: Restoring platform NVS memory
[38841.583391] Suspended for 3.752 seconds
[38841.583440] Enabling non-boot CPUs ...
[38841.583543] x86: Booting SMP configuration:
[38841.583545] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38841.584286]  cache: parent cpu1 should not be sleeping
[38841.584502] CPU1 is up
[38841.584546] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38841.585192]  cache: parent cpu2 should not be sleeping
[38841.585433] CPU2 is up
[38841.585466] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38841.586105]  cache: parent cpu3 should not be sleeping
[38841.586455] CPU3 is up
[38841.591065] ACPI: Waking up from system sleep state S3
[38842.514188] PM: noirq resume of devices complete after 20.642 msecs
[38842.514779] PM: early resume of devices complete after 0.548 msecs
[38842.514950] ACPI: EC: event unblocked
[38842.515671] sd 0:0:0:0: [sda] Starting disk
[38842.578386] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38842.595360] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38842.612288] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38842.661549] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38842.828267] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38842.829128] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38842.829131] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38842.831468] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38842.831471] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38842.832928] ata1.00: configured for UDMA/133
[38842.849540] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38842.849736] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38843.109703] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38843.369773] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38843.515928] PM: resume of devices complete after 1001.157 msecs
[38843.516024] usb 2-4:1.0: rebind failed: -517
[38843.516028] usb 2-4:1.1: rebind failed: -517
[38843.516408] PM: Finishing wakeup.
[38843.516409] OOM killer enabled.
[38843.516410] Restarting tasks ... 
[38843.528889] Bluetooth: hci0: read Intel version: 370710018002030d00
[38843.528896] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38843.537845] done.
[38843.707896] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38843.888700] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38844.139131] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38844.211300] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38871.030061] PM: Syncing filesystems ... done.
[38871.048653] PM: Preparing system for sleep (mem)
[38871.049064] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38871.051606] OOM killer disabled.
[38871.051607] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38871.053036] PM: Suspending system (mem)
[38871.053071] Suspending console(s) (use no_console_suspend to debug)
[38871.228600] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38871.229962] sd 0:0:0:0: [sda] Stopping disk
[38871.479616] PM: suspend of devices complete after 426.362 msecs
[38871.497387] PM: late suspend of devices complete after 17.758 msecs
[38871.517959] PM: noirq suspend of devices complete after 20.564 msecs
[38871.518697] ACPI: Preparing to enter system sleep state S3
[38871.773170] ACPI: EC: event blocked
[38871.773171] ACPI: EC: EC stopped
[38871.773172] PM: Saving platform NVS memory
[38871.773203] Disabling non-boot CPUs ...
[38871.791543] smpboot: CPU 1 is now offline
[38871.819480] smpboot: CPU 2 is now offline
[38871.842669] smpboot: CPU 3 is now offline
[38871.844955] ACPI: Low-level resume complete
[38871.845034] ACPI: EC: EC started
[38871.845035] PM: Restoring platform NVS memory
[38871.845380] Suspended for 2.739 seconds
[38871.845434] Enabling non-boot CPUs ...
[38871.845480] x86: Booting SMP configuration:
[38871.845481] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38871.846222]  cache: parent cpu1 should not be sleeping
[38871.846441] CPU1 is up
[38871.846524] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38871.847174]  cache: parent cpu2 should not be sleeping
[38871.847451] CPU2 is up
[38871.847487] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38871.848120]  cache: parent cpu3 should not be sleeping
[38871.848471] CPU3 is up
[38871.853095] ACPI: Waking up from system sleep state S3
[38872.780541] PM: noirq resume of devices complete after 21.089 msecs
[38872.781333] PM: early resume of devices complete after 0.748 msecs
[38872.781523] ACPI: EC: event unblocked
[38872.782190] sd 0:0:0:0: [sda] Starting disk
[38872.843521] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38872.859551] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38872.875508] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38872.963514] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38873.043469] usb 1-1.8: device descriptor read/64, error -32
[38873.094406] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38873.095280] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38873.095284] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38873.097682] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38873.097686] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38873.099123] ata1.00: configured for UDMA/133
[38873.111682] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38873.231455] usb 1-1.8: device descriptor read/64, error -32
[38873.371707] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38873.419454] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38873.499458] usb 1-1.8: device descriptor read/64, error -32
[38873.631599] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38873.687481] usb 1-1.8: device descriptor read/64, error -32
[38873.875464] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38874.063489] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38874.098803] PM: resume of devices complete after 1317.478 msecs
[38874.098945] usb 2-4:1.0: rebind failed: -517
[38874.098952] usb 2-4:1.1: rebind failed: -517
[38874.099610] PM: Finishing wakeup.
[38874.099612] OOM killer enabled.
[38874.099614] Restarting tasks ... 
[38874.113491] Bluetooth: hci0: read Intel version: 370710018002030d00
[38874.113618] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38874.124495] done.
[38874.286529] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38874.472450] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38874.703704] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38874.778553] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38901.284002] PM: Syncing filesystems ... done.
[38901.302224] PM: Preparing system for sleep (mem)
[38901.302638] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38901.305071] OOM killer disabled.
[38901.305072] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38901.306518] PM: Suspending system (mem)
[38901.306552] Suspending console(s) (use no_console_suspend to debug)
[38901.494516] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38901.495823] sd 0:0:0:0: [sda] Stopping disk
[38901.744618] PM: suspend of devices complete after 437.902 msecs
[38901.763231] PM: late suspend of devices complete after 18.604 msecs
[38901.783852] PM: noirq suspend of devices complete after 20.613 msecs
[38901.784589] ACPI: Preparing to enter system sleep state S3
[38902.039082] ACPI: EC: event blocked
[38902.039083] ACPI: EC: EC stopped
[38902.039084] PM: Saving platform NVS memory
[38902.039118] Disabling non-boot CPUs ...
[38902.057475] smpboot: CPU 1 is now offline
[38902.076652] smpboot: CPU 2 is now offline
[38902.100565] smpboot: CPU 3 is now offline
[38902.102856] ACPI: Low-level resume complete
[38902.102935] ACPI: EC: EC started
[38902.102935] PM: Restoring platform NVS memory
[38902.103279] Suspended for 2.744 seconds
[38902.103344] Enabling non-boot CPUs ...
[38902.103443] x86: Booting SMP configuration:
[38902.103445] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38902.104188]  cache: parent cpu1 should not be sleeping
[38902.104404] CPU1 is up
[38902.104447] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38902.105093]  cache: parent cpu2 should not be sleeping
[38902.105380] CPU2 is up
[38902.105409] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38902.106041]  cache: parent cpu3 should not be sleeping
[38902.106400] CPU3 is up
[38902.111015] ACPI: Waking up from system sleep state S3
[38903.034407] PM: noirq resume of devices complete after 21.043 msecs
[38903.035217] PM: early resume of devices complete after 0.766 msecs
[38903.035403] ACPI: EC: event unblocked
[38903.036249] sd 0:0:0:0: [sda] Starting disk
[38903.097591] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38903.113765] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38903.129909] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38903.181395] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38903.261369] usb 1-1.8: device descriptor read/64, error -32
[38903.348276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38903.349177] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38903.349181] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38903.351567] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38903.351571] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38903.353046] ata1.00: configured for UDMA/133
[38903.365552] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38903.449350] usb 1-1.8: device descriptor read/64, error -32
[38903.625607] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38903.637361] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38903.717357] usb 1-1.8: device descriptor read/64, error -32
[38903.885581] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38903.905355] usb 1-1.8: device descriptor read/64, error -32
[38904.093368] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38904.281350] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38904.315551] PM: resume of devices complete after 1280.346 msecs
[38904.315641] usb 2-4:1.0: rebind failed: -517
[38904.315645] usb 2-4:1.1: rebind failed: -517
[38904.316033] PM: Finishing wakeup.
[38904.316034] OOM killer enabled.
[38904.316035] Restarting tasks ... 
[38904.330611] Bluetooth: hci0: read Intel version: 370710018002030d00
[38904.330618] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38904.344343] done.
[38904.523352] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38904.726165] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38904.963920] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38905.038878] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38931.534226] PM: Syncing filesystems ... done.
[38931.567737] PM: Preparing system for sleep (mem)
[38931.568152] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38931.570662] OOM killer disabled.
[38931.570663] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38931.572084] PM: Suspending system (mem)
[38931.572117] Suspending console(s) (use no_console_suspend to debug)
[38931.753436] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38931.754698] sd 0:0:0:0: [sda] Stopping disk
[38932.011810] PM: suspend of devices complete after 439.530 msecs
[38932.029249] PM: late suspend of devices complete after 17.411 msecs
[38932.049772] PM: noirq suspend of devices complete after 20.513 msecs
[38932.050511] ACPI: Preparing to enter system sleep state S3
[38932.304994] ACPI: EC: event blocked
[38932.304996] ACPI: EC: EC stopped
[38932.304997] PM: Saving platform NVS memory
[38932.305028] Disabling non-boot CPUs ...
[38932.323347] smpboot: CPU 1 is now offline
[38932.347324] smpboot: CPU 2 is now offline
[38932.370467] smpboot: CPU 3 is now offline
[38932.372786] ACPI: Low-level resume complete
[38932.372865] ACPI: EC: EC started
[38932.372866] PM: Restoring platform NVS memory
[38932.373210] Suspended for 3.731 seconds
[38932.373261] Enabling non-boot CPUs ...
[38932.373306] x86: Booting SMP configuration:
[38932.373308] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38932.374047]  cache: parent cpu1 should not be sleeping
[38932.374266] CPU1 is up
[38932.374348] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38932.374995]  cache: parent cpu2 should not be sleeping
[38932.375263] CPU2 is up
[38932.375300] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38932.375931]  cache: parent cpu3 should not be sleeping
[38932.376283] CPU3 is up
[38932.380897] ACPI: Waking up from system sleep state S3
[38933.304233] PM: noirq resume of devices complete after 20.948 msecs
[38933.304989] PM: early resume of devices complete after 0.712 msecs
[38933.305175] ACPI: EC: event unblocked
[38933.305831] sd 0:0:0:0: [sda] Starting disk
[38933.367355] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38933.383450] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38933.399544] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38933.451307] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38933.618266] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38933.619150] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38933.619154] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38933.621564] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38933.621568] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38933.622990] ata1.00: configured for UDMA/133
[38933.635418] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38933.639288] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38933.895518] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38934.155462] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38934.297079] PM: resume of devices complete after 992.098 msecs
[38934.297175] usb 2-4:1.0: rebind failed: -517
[38934.297179] usb 2-4:1.1: rebind failed: -517
[38934.297556] PM: Finishing wakeup.
[38934.297558] OOM killer enabled.
[38934.297559] Restarting tasks ... done.
[38934.319265] Bluetooth: hci0: read Intel version: 370710018002030d00
[38934.319644] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38934.497163] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38934.673152] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38934.920422] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38935.001146] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38961.785155] PM: Syncing filesystems ... done.
[38961.802699] PM: Preparing system for sleep (mem)
[38961.803106] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38961.805650] OOM killer disabled.
[38961.805651] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38961.807053] PM: Suspending system (mem)
[38961.807087] Suspending console(s) (use no_console_suspend to debug)
[38961.987426] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38961.988555] sd 0:0:0:0: [sda] Stopping disk
[38962.241734] PM: suspend of devices complete after 434.482 msecs
[38962.259139] PM: late suspend of devices complete after 17.377 msecs
[38962.279674] PM: noirq suspend of devices complete after 20.528 msecs
[38962.280412] ACPI: Preparing to enter system sleep state S3
[38962.534909] ACPI: EC: event blocked
[38962.534910] ACPI: EC: EC stopped
[38962.534911] PM: Saving platform NVS memory
[38962.534942] Disabling non-boot CPUs ...
[38962.553280] smpboot: CPU 1 is now offline
[38962.577244] smpboot: CPU 2 is now offline
[38962.600408] smpboot: CPU 3 is now offline
[38962.602692] ACPI: Low-level resume complete
[38962.602772] ACPI: EC: EC started
[38962.602772] PM: Restoring platform NVS memory
[38962.603117] Suspended for 2.772 seconds
[38962.603168] Enabling non-boot CPUs ...
[38962.603272] x86: Booting SMP configuration:
[38962.603273] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38962.604017]  cache: parent cpu1 should not be sleeping
[38962.604232] CPU1 is up
[38962.604274] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38962.604923]  cache: parent cpu2 should not be sleeping
[38962.605201] CPU2 is up
[38962.605231] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38962.605866]  cache: parent cpu3 should not be sleeping
[38962.606212] CPU3 is up
[38962.610826] ACPI: Waking up from system sleep state S3
[38963.534251] PM: noirq resume of devices complete after 21.055 msecs
[38963.535046] PM: early resume of devices complete after 0.752 msecs
[38963.535217] ACPI: EC: event unblocked
[38963.535939] sd 0:0:0:0: [sda] Starting disk
[38963.597266] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38963.613374] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38963.629416] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38963.717225] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38963.848038] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38963.848921] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38963.848925] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38963.851297] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38963.851300] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38963.852766] ata1.00: configured for UDMA/133
[38963.865439] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38963.905207] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38964.125408] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38964.385359] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38964.541298] PM: resume of devices complete after 1006.260 msecs
[38964.541383] usb 2-4:1.0: rebind failed: -517
[38964.541389] usb 2-4:1.1: rebind failed: -517
[38964.541638] PM: Finishing wakeup.
[38964.541639] OOM killer enabled.
[38964.541640] Restarting tasks ... done.
[38964.568225] Bluetooth: hci0: read Intel version: 370710018002030d00
[38964.568232] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38964.764238] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38964.935353] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38965.181828] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38965.262451] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38992.032055] PM: Syncing filesystems ... done.
[38992.049280] PM: Preparing system for sleep (mem)
[38992.049723] Freezing user space processes ... (elapsed 0.002 seconds) done.
[38992.052255] OOM killer disabled.
[38992.052255] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[38992.053699] PM: Suspending system (mem)
[38992.053733] Suspending console(s) (use no_console_suspend to debug)
[38992.227768] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[38992.229044] sd 0:0:0:0: [sda] Stopping disk
[38992.479800] PM: suspend of devices complete after 425.899 msecs
[38992.496834] PM: late suspend of devices complete after 17.025 msecs
[38992.517578] PM: noirq suspend of devices complete after 20.736 msecs
[38992.518316] ACPI: Preparing to enter system sleep state S3
[38992.772828] ACPI: EC: event blocked
[38992.772830] ACPI: EC: EC stopped
[38992.772831] PM: Saving platform NVS memory
[38992.772861] Disabling non-boot CPUs ...
[38992.791178] smpboot: CPU 1 is now offline
[38992.814440] smpboot: CPU 2 is now offline
[38992.834288] smpboot: CPU 3 is now offline
[38992.836540] ACPI: Low-level resume complete
[38992.836619] ACPI: EC: EC started
[38992.836620] PM: Restoring platform NVS memory
[38992.836965] Suspended for 3.768 seconds
[38992.837014] Enabling non-boot CPUs ...
[38992.837061] x86: Booting SMP configuration:
[38992.837062] smpboot: Booting Node 0 Processor 1 APIC 0x1
[38992.837805]  cache: parent cpu1 should not be sleeping
[38992.838023] CPU1 is up
[38992.838108] smpboot: Booting Node 0 Processor 2 APIC 0x2
[38992.838753]  cache: parent cpu2 should not be sleeping
[38992.838992] CPU2 is up
[38992.839027] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38992.839660]  cache: parent cpu3 should not be sleeping
[38992.840008] CPU3 is up
[38992.844621] ACPI: Waking up from system sleep state S3
[38993.768248] PM: noirq resume of devices complete after 21.133 msecs
[38993.768991] PM: early resume of devices complete after 0.698 msecs
[38993.769182] ACPI: EC: event unblocked
[38993.770228] sd 0:0:0:0: [sda] Starting disk
[38993.831256] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[38993.847394] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[38993.863453] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[38993.951077] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38994.031121] usb 1-1.8: device descriptor read/64, error -32
[38994.086034] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[38994.086915] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38994.086920] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38994.089323] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[38994.089328] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[38994.090790] ata1.00: configured for UDMA/133
[38994.099357] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[38994.219096] usb 1-1.8: device descriptor read/64, error -32
[38994.359295] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[38994.407111] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38994.487109] usb 1-1.8: device descriptor read/64, error -32
[38994.619346] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[38994.675062] usb 1-1.8: device descriptor read/64, error -32
[38994.863172] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[38995.051144] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[38995.085817] PM: resume of devices complete after 1316.835 msecs
[38995.085938] usb 2-4:1.0: rebind failed: -517
[38995.085944] usb 2-4:1.1: rebind failed: -517
[38995.086470] PM: Finishing wakeup.
[38995.086472] OOM killer enabled.
[38995.086473] Restarting tasks ... 
[38995.103057] Bluetooth: hci0: read Intel version: 370710018002030d00
[38995.103103] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[38995.116494] done.
[38995.284148] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[38995.465491] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38995.718566] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[38995.783116] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39022.282734] PM: Syncing filesystems ... done.
[39022.302589] PM: Preparing system for sleep (mem)
[39022.303064] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39022.305563] OOM killer disabled.
[39022.305564] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39022.306892] PM: Suspending system (mem)
[39022.306926] Suspending console(s) (use no_console_suspend to debug)
[39022.494168] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39022.495578] sd 0:0:0:0: [sda] Stopping disk
[39022.749105] PM: suspend of devices complete after 442.013 msecs
[39022.766757] PM: late suspend of devices complete after 17.644 msecs
[39022.787483] PM: noirq suspend of devices complete after 20.717 msecs
[39022.788221] ACPI: Preparing to enter system sleep state S3
[39023.042740] ACPI: EC: event blocked
[39023.042741] ACPI: EC: EC stopped
[39023.042742] PM: Saving platform NVS memory
[39023.042773] Disabling non-boot CPUs ...
[39023.061116] smpboot: CPU 1 is now offline
[39023.084288] smpboot: CPU 2 is now offline
[39023.108217] smpboot: CPU 3 is now offline
[39023.110487] ACPI: Low-level resume complete
[39023.110566] ACPI: EC: EC started
[39023.110567] PM: Restoring platform NVS memory
[39023.110912] Suspended for 2.727 seconds
[39023.110979] Enabling non-boot CPUs ...
[39023.111076] x86: Booting SMP configuration:
[39023.111077] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39023.111822]  cache: parent cpu1 should not be sleeping
[39023.112038] CPU1 is up
[39023.112082] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39023.112729]  cache: parent cpu2 should not be sleeping
[39023.112969] CPU2 is up
[39023.113021] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39023.113653]  cache: parent cpu3 should not be sleeping
[39023.114002] CPU3 is up
[39023.118618] ACPI: Waking up from system sleep state S3
[39024.042048] PM: noirq resume of devices complete after 21.015 msecs
[39024.042889] PM: early resume of devices complete after 0.798 msecs
[39024.043147] ACPI: EC: event unblocked
[39024.043803] sd 0:0:0:0: [sda] Starting disk
[39024.105124] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39024.121231] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39024.137276] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39024.225045] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39024.304998] usb 1-1.8: device descriptor read/64, error -32
[39024.355737] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39024.356622] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39024.356625] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39024.359056] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39024.359060] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39024.360562] ata1.00: configured for UDMA/133
[39024.373190] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39024.493012] usb 1-1.8: device descriptor read/64, error -32
[39024.633267] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39024.680995] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39024.761016] usb 1-1.8: device descriptor read/64, error -32
[39024.893202] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39024.949007] usb 1-1.8: device descriptor read/64, error -32
[39025.137028] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39025.325000] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39025.358902] PM: resume of devices complete after 1316.025 msecs
[39025.358990] usb 2-4:1.0: rebind failed: -517
[39025.358995] usb 2-4:1.1: rebind failed: -517
[39025.359383] PM: Finishing wakeup.
[39025.359384] OOM killer enabled.
[39025.359385] Restarting tasks ... 
[39025.372015] Bluetooth: hci0: read Intel version: 370710018002030d00
[39025.372023] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39025.381126] done.
[39025.569058] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39025.730015] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39025.969954] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39026.036019] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39052.541591] PM: Syncing filesystems ... done.
[39052.598484] PM: Preparing system for sleep (mem)
[39052.599080] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39052.602180] OOM killer disabled.
[39052.602181] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39052.603804] PM: Suspending system (mem)
[39052.603853] Suspending console(s) (use no_console_suspend to debug)
[39052.786175] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39052.787498] sd 0:0:0:0: [sda] Stopping disk
[39053.039532] PM: suspend of devices complete after 435.411 msecs
[39053.056663] PM: late suspend of devices complete after 17.122 msecs
[39053.077386] PM: noirq suspend of devices complete after 20.716 msecs
[39053.078124] ACPI: Preparing to enter system sleep state S3
[39053.332655] ACPI: EC: event blocked
[39053.332657] ACPI: EC: EC stopped
[39053.332658] PM: Saving platform NVS memory
[39053.332692] Disabling non-boot CPUs ...
[39053.351029] smpboot: CPU 1 is now offline
[39053.382211] smpboot: CPU 2 is now offline
[39053.406134] smpboot: CPU 3 is now offline
[39053.408347] ACPI: Low-level resume complete
[39053.408426] ACPI: EC: EC started
[39053.408427] PM: Restoring platform NVS memory
[39053.408771] Suspended for 2.704 seconds
[39053.408820] Enabling non-boot CPUs ...
[39053.408865] x86: Booting SMP configuration:
[39053.408867] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39053.409627]  cache: parent cpu1 should not be sleeping
[39053.409845] CPU1 is up
[39053.409928] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39053.410574]  cache: parent cpu2 should not be sleeping
[39053.410817] CPU2 is up
[39053.410852] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39053.411483]  cache: parent cpu3 should not be sleeping
[39053.411831] CPU3 is up
[39053.416439] ACPI: Waking up from system sleep state S3
[39054.339888] PM: noirq resume of devices complete after 20.957 msecs
[39054.340599] PM: early resume of devices complete after 0.672 msecs
[39054.340769] ACPI: EC: event unblocked
[39054.341469] sd 0:0:0:0: [sda] Starting disk
[39054.403383] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39054.420072] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39054.436750] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39054.486924] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39054.654065] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39054.654932] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39054.654936] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39054.657294] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39054.657297] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39054.658715] ata1.00: configured for UDMA/133
[39054.674932] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39054.675076] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39054.935130] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39055.195113] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39055.336301] PM: resume of devices complete after 995.711 msecs
[39055.336379] usb 2-4:1.0: rebind failed: -517
[39055.336383] usb 2-4:1.1: rebind failed: -517
[39055.336594] PM: Finishing wakeup.
[39055.336596] OOM killer enabled.
[39055.336597] Restarting tasks ... done.
[39055.364711] Bluetooth: hci0: read Intel version: 370710018002030d00
[39055.364776] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39055.491747] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39055.706004] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39055.950854] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39056.024569] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39082.794477] PM: Syncing filesystems ... done.
[39082.813577] PM: Preparing system for sleep (mem)
[39082.814288] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39082.817544] OOM killer disabled.
[39082.817545] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39082.818701] PM: Suspending system (mem)
[39082.818734] Suspending console(s) (use no_console_suspend to debug)
[39083.003469] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39083.004600] sd 0:0:0:0: [sda] Stopping disk
[39083.257381] PM: suspend of devices complete after 438.481 msecs
[39083.274692] PM: late suspend of devices complete after 17.287 msecs
[39083.295338] PM: noirq suspend of devices complete after 20.638 msecs
[39083.296076] ACPI: Preparing to enter system sleep state S3
[39083.550564] ACPI: EC: event blocked
[39083.550565] ACPI: EC: EC stopped
[39083.550566] PM: Saving platform NVS memory
[39083.550597] Disabling non-boot CPUs ...
[39083.568947] smpboot: CPU 1 is now offline
[39083.588140] smpboot: CPU 2 is now offline
[39083.612043] smpboot: CPU 3 is now offline
[39083.614329] ACPI: Low-level resume complete
[39083.614409] ACPI: EC: EC started
[39083.614409] PM: Restoring platform NVS memory
[39083.614755] Suspended for 3.795 seconds
[39083.614805] Enabling non-boot CPUs ...
[39083.614903] x86: Booting SMP configuration:
[39083.614904] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39083.615647]  cache: parent cpu1 should not be sleeping
[39083.615864] CPU1 is up
[39083.615908] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39083.616555]  cache: parent cpu2 should not be sleeping
[39083.616797] CPU2 is up
[39083.616848] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39083.617479]  cache: parent cpu3 should not be sleeping
[39083.617828] CPU3 is up
[39083.622445] ACPI: Waking up from system sleep state S3
[39084.545945] PM: noirq resume of devices complete after 21.092 msecs
[39084.546726] PM: early resume of devices complete after 0.737 msecs
[39084.546899] ACPI: EC: event unblocked
[39084.547561] sd 0:0:0:0: [sda] Starting disk
[39084.609096] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39084.625645] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39084.642318] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39084.692872] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39084.772835] usb 1-1.8: device descriptor read/64, error -32
[39084.859943] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39084.860820] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39084.860824] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39084.863146] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39084.863149] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39084.864572] ata1.00: configured for UDMA/133
[39084.881059] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39084.960835] usb 1-1.8: device descriptor read/64, error -32
[39085.141000] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39085.148831] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39085.228829] usb 1-1.8: device descriptor read/64, error -32
[39085.401007] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39085.416827] usb 1-1.8: device descriptor read/64, error -32
[39085.604852] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39085.792825] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39085.826294] PM: resume of devices complete after 1279.580 msecs
[39085.826372] usb 2-4:1.0: rebind failed: -517
[39085.826377] usb 2-4:1.1: rebind failed: -517
[39085.826609] PM: Finishing wakeup.
[39085.826610] OOM killer enabled.
[39085.826611] Restarting tasks ... done.
[39085.849860] Bluetooth: hci0: read Intel version: 370710018002030d00
[39085.849867] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39086.053902] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39086.229988] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39086.475865] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39086.549203] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39113.049027] PM: Syncing filesystems ... done.
[39113.067153] PM: Preparing system for sleep (mem)
[39113.067586] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39113.070115] OOM killer disabled.
[39113.070115] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39113.071546] PM: Suspending system (mem)
[39113.071581] Suspending console(s) (use no_console_suspend to debug)
[39113.255905] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39113.257245] sd 0:0:0:0: [sda] Stopping disk
[39113.515452] PM: suspend of devices complete after 443.701 msecs
[39113.532724] PM: late suspend of devices complete after 17.255 msecs
[39113.553263] PM: noirq suspend of devices complete after 20.530 msecs
[39113.554000] ACPI: Preparing to enter system sleep state S3
[39113.808477] ACPI: EC: event blocked
[39113.808478] ACPI: EC: EC stopped
[39113.808480] PM: Saving platform NVS memory
[39113.808511] Disabling non-boot CPUs ...
[39113.826832] smpboot: CPU 1 is now offline
[39113.846054] smpboot: CPU 2 is now offline
[39113.869953] smpboot: CPU 3 is now offline
[39113.872205] ACPI: Low-level resume complete
[39113.872284] ACPI: EC: EC started
[39113.872285] PM: Restoring platform NVS memory
[39113.872632] Suspended for 2.744 seconds
[39113.872685] Enabling non-boot CPUs ...
[39113.872772] x86: Booting SMP configuration:
[39113.872774] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39113.873519]  cache: parent cpu1 should not be sleeping
[39113.873736] CPU1 is up
[39113.873787] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39113.874432]  cache: parent cpu2 should not be sleeping
[39113.874677] CPU2 is up
[39113.874705] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39113.875342]  cache: parent cpu3 should not be sleeping
[39113.875692] CPU3 is up
[39113.880302] ACPI: Waking up from system sleep state S3
[39114.803770] PM: noirq resume of devices complete after 21.001 msecs
[39114.804339] PM: early resume of devices complete after 0.525 msecs
[39114.804535] ACPI: EC: event unblocked
[39114.805312] sd 0:0:0:0: [sda] Starting disk
[39114.867007] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39114.883580] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39114.900252] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39114.950792] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39115.117533] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39115.118407] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39115.118410] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39115.120734] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39115.120737] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39115.122179] ata1.00: configured for UDMA/133
[39115.138768] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39115.138928] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39115.399038] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39115.658948] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39115.800407] PM: resume of devices complete after 996.076 msecs
[39115.800485] usb 2-4:1.0: rebind failed: -517
[39115.800489] usb 2-4:1.1: rebind failed: -517
[39115.800701] PM: Finishing wakeup.
[39115.800702] OOM killer enabled.
[39115.800703] Restarting tasks ... done.
[39115.843476] Bluetooth: hci0: read Intel version: 370710018002030d00
[39115.843542] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39116.053510] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39116.195634] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39116.432816] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39116.528483] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39143.294219] PM: Syncing filesystems ... done.
[39143.313302] PM: Preparing system for sleep (mem)
[39143.313720] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39143.316280] OOM killer disabled.
[39143.316281] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39143.317707] PM: Suspending system (mem)
[39143.317741] Suspending console(s) (use no_console_suspend to debug)
[39143.497117] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39143.498340] sd 0:0:0:0: [sda] Stopping disk
[39143.748859] PM: suspend of devices complete after 430.949 msecs
[39143.766610] PM: late suspend of devices complete after 17.741 msecs
[39143.787160] PM: noirq suspend of devices complete after 20.543 msecs
[39143.787898] ACPI: Preparing to enter system sleep state S3
[39144.042391] ACPI: EC: event blocked
[39144.042393] ACPI: EC: EC stopped
[39144.042394] PM: Saving platform NVS memory
[39144.042424] Disabling non-boot CPUs ...
[39144.060772] smpboot: CPU 1 is now offline
[39144.083967] smpboot: CPU 2 is now offline
[39144.103860] smpboot: CPU 3 is now offline
[39144.106128] ACPI: Low-level resume complete
[39144.106207] ACPI: EC: EC started
[39144.106207] PM: Restoring platform NVS memory
[39144.106552] Suspended for 3.767 seconds
[39144.106602] Enabling non-boot CPUs ...
[39144.106647] x86: Booting SMP configuration:
[39144.106648] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39144.107390]  cache: parent cpu1 should not be sleeping
[39144.107607] CPU1 is up
[39144.107678] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39144.108322]  cache: parent cpu2 should not be sleeping
[39144.108566] CPU2 is up
[39144.108595] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39144.109232]  cache: parent cpu3 should not be sleeping
[39144.109579] CPU3 is up
[39144.114191] ACPI: Waking up from system sleep state S3
[39145.037802] PM: noirq resume of devices complete after 21.118 msecs
[39145.038598] PM: early resume of devices complete after 0.754 msecs
[39145.038786] ACPI: EC: event unblocked
[39145.039398] sd 0:0:0:0: [sda] Starting disk
[39145.100999] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39145.117709] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39145.134400] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39145.184667] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39145.264682] usb 1-1.8: device descriptor read/64, error -32
[39145.351546] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39145.352426] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39145.352429] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39145.354768] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39145.354771] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39145.356192] ata1.00: configured for UDMA/133
[39145.372862] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39145.452664] usb 1-1.8: device descriptor read/64, error -32
[39145.632823] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39145.640663] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39145.720661] usb 1-1.8: device descriptor read/64, error -32
[39145.892873] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39145.908669] usb 1-1.8: device descriptor read/64, error -32
[39146.096691] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39146.284674] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39146.319336] PM: resume of devices complete after 1280.749 msecs
[39146.319443] usb 2-4:1.0: rebind failed: -517
[39146.319448] usb 2-4:1.1: rebind failed: -517
[39146.319910] PM: Finishing wakeup.
[39146.319911] OOM killer enabled.
[39146.319913] Restarting tasks ... 
[39146.337562] Bluetooth: hci0: read Intel version: 370710018002030d00
[39146.337569] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39146.355413] done.
[39146.521789] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39146.706624] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39146.962857] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39147.034905] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39173.550480] PM: Syncing filesystems ... done.
[39173.573295] PM: Preparing system for sleep (mem)
[39173.574158] Freezing user space processes ... (elapsed 0.004 seconds) done.
[39173.578312] OOM killer disabled.
[39173.578314] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39173.580180] PM: Suspending system (mem)
[39173.580293] Suspending console(s) (use no_console_suspend to debug)
[39173.767338] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39173.768562] sd 0:0:0:0: [sda] Stopping disk
[39174.297861] PM: suspend of devices complete after 717.247 msecs
[39174.316545] PM: late suspend of devices complete after 18.673 msecs
[39174.337091] PM: noirq suspend of devices complete after 20.537 msecs
[39174.337829] ACPI: Preparing to enter system sleep state S3
[39174.592304] ACPI: EC: event blocked
[39174.592305] ACPI: EC: EC stopped
[39174.592307] PM: Saving platform NVS memory
[39174.592340] Disabling non-boot CPUs ...
[39174.610680] smpboot: CPU 1 is now offline
[39174.629883] smpboot: CPU 2 is now offline
[39174.653787] smpboot: CPU 3 is now offline
[39174.656078] ACPI: Low-level resume complete
[39174.656158] ACPI: EC: EC started
[39174.656158] PM: Restoring platform NVS memory
[39174.656503] Suspended for 2.451 seconds
[39174.656552] Enabling non-boot CPUs ...
[39174.656656] x86: Booting SMP configuration:
[39174.656658] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39174.657401]  cache: parent cpu1 should not be sleeping
[39174.657617] CPU1 is up
[39174.657659] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39174.658307]  cache: parent cpu2 should not be sleeping
[39174.658590] CPU2 is up
[39174.658620] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39174.659250]  cache: parent cpu3 should not be sleeping
[39174.659601] CPU3 is up
[39174.664218] ACPI: Waking up from system sleep state S3
[39175.587602] PM: noirq resume of devices complete after 21.017 msecs
[39175.588244] PM: early resume of devices complete after 0.603 msecs
[39175.588401] ACPI: EC: event unblocked
[39175.589212] sd 0:0:0:0: [sda] Starting disk
[39175.650742] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39175.666881] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39175.682941] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39175.770613] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39175.850607] usb 1-1.8: device descriptor read/64, error -32
[39175.901489] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39175.902390] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39175.902398] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39175.904763] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39175.904771] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39175.906204] ata1.00: configured for UDMA/133
[39175.918702] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39176.038578] usb 1-1.8: device descriptor read/64, error -32
[39176.178782] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39176.226554] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39176.306571] usb 1-1.8: device descriptor read/64, error -32
[39176.438770] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39176.494577] usb 1-1.8: device descriptor read/64, error -32
[39176.682589] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39176.870558] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39176.904805] PM: resume of devices complete after 1316.573 msecs
[39176.904897] usb 2-4:1.0: rebind failed: -517
[39176.904902] usb 2-4:1.1: rebind failed: -517
[39176.905312] PM: Finishing wakeup.
[39176.905314] OOM killer enabled.
[39176.905315] Restarting tasks ... 
[39176.918077] Bluetooth: hci0: read Intel version: 370710018002030d00
[39176.918163] done.
[39176.918246] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39177.082149] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39177.264938] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39177.509827] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39177.580061] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39203.792430] PM: Syncing filesystems ... done.
[39203.848428] PM: Preparing system for sleep (mem)
[39203.849141] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39203.852896] OOM killer disabled.
[39203.852897] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39203.854530] PM: Suspending system (mem)
[39203.854590] Suspending console(s) (use no_console_suspend to debug)
[39204.030225] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39204.031493] sd 0:0:0:0: [sda] Stopping disk
[39204.282395] PM: suspend of devices complete after 427.514 msecs
[39204.302219] PM: late suspend of devices complete after 19.817 msecs
[39204.322929] PM: noirq suspend of devices complete after 20.703 msecs
[39204.323585] ACPI: Preparing to enter system sleep state S3
[39204.578229] ACPI: EC: event blocked
[39204.578230] ACPI: EC: EC stopped
[39204.578231] PM: Saving platform NVS memory
[39204.578259] Disabling non-boot CPUs ...
[39204.596529] smpboot: CPU 1 is now offline
[39204.619833] smpboot: CPU 2 is now offline
[39204.643701] smpboot: CPU 3 is now offline
[39204.645948] ACPI: Low-level resume complete
[39204.646027] ACPI: EC: EC started
[39204.646027] PM: Restoring platform NVS memory
[39204.646371] Suspended for 4.012 seconds
[39204.646420] Enabling non-boot CPUs ...
[39204.646497] x86: Booting SMP configuration:
[39204.646499] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39204.647238]  cache: parent cpu1 should not be sleeping
[39204.647454] CPU1 is up
[39204.647507] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39204.648156]  cache: parent cpu2 should not be sleeping
[39204.648402] CPU2 is up
[39204.648440] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39204.649078]  cache: parent cpu3 should not be sleeping
[39204.649432] CPU3 is up
[39204.654052] ACPI: Waking up from system sleep state S3
[39205.577537] PM: noirq resume of devices complete after 21.038 msecs
[39205.578250] PM: early resume of devices complete after 0.668 msecs
[39205.578438] ACPI: EC: event unblocked
[39205.579210] sd 0:0:0:0: [sda] Starting disk
[39205.640896] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39205.657381] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39205.673855] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39205.724504] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39205.804503] usb 1-1.8: device descriptor read/64, error -32
[39205.891396] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39205.892281] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39205.892285] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39205.894694] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39205.894700] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39205.896162] ata1.00: configured for UDMA/133
[39205.912696] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39205.992493] usb 1-1.8: device descriptor read/64, error -32
[39206.172714] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39206.180520] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39206.260504] usb 1-1.8: device descriptor read/64, error -32
[39206.432699] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39206.448502] usb 1-1.8: device descriptor read/64, error -32
[39206.636514] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39206.824497] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39206.859209] PM: resume of devices complete after 1280.968 msecs
[39206.859326] usb 2-4:1.0: rebind failed: -517
[39206.859332] usb 2-4:1.1: rebind failed: -517
[39206.859857] PM: Finishing wakeup.
[39206.859859] OOM killer enabled.
[39206.859861] Restarting tasks ... 
[39206.872363] Bluetooth: hci0: read Intel version: 370710018002030d00
[39206.872370] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39206.884372] done.
[39207.059381] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39207.241294] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39207.498438] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39207.575502] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39234.054309] PM: Syncing filesystems ... done.
[39234.077215] PM: Preparing system for sleep (mem)
[39234.077857] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39234.081414] OOM killer disabled.
[39234.081415] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39234.083099] PM: Suspending system (mem)
[39234.083152] Suspending console(s) (use no_console_suspend to debug)
[39234.271706] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39234.273015] sd 0:0:0:0: [sda] Stopping disk
[39234.527008] PM: suspend of devices complete after 443.570 msecs
[39234.544366] PM: late suspend of devices complete after 17.346 msecs
[39234.564914] PM: noirq suspend of devices complete after 20.538 msecs
[39234.565652] ACPI: Preparing to enter system sleep state S3
[39234.820150] ACPI: EC: event blocked
[39234.820152] ACPI: EC: EC stopped
[39234.820153] PM: Saving platform NVS memory
[39234.820188] Disabling non-boot CPUs ...
[39234.838499] smpboot: CPU 1 is now offline
[39234.862468] smpboot: CPU 2 is now offline
[39234.885626] smpboot: CPU 3 is now offline
[39234.887914] ACPI: Low-level resume complete
[39234.887993] ACPI: EC: EC started
[39234.887994] PM: Restoring platform NVS memory
[39234.888339] Suspended for 2.759 seconds
[39234.888400] Enabling non-boot CPUs ...
[39234.888500] x86: Booting SMP configuration:
[39234.888501] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39234.889239]  cache: parent cpu1 should not be sleeping
[39234.889455] CPU1 is up
[39234.889498] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39234.890146]  cache: parent cpu2 should not be sleeping
[39234.890429] CPU2 is up
[39234.890463] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39234.891095]  cache: parent cpu3 should not be sleeping
[39234.891450] CPU3 is up
[39234.896049] ACPI: Waking up from system sleep state S3
[39235.819463] PM: noirq resume of devices complete after 21.040 msecs
[39235.820271] PM: early resume of devices complete after 0.762 msecs
[39235.820439] ACPI: EC: event unblocked
[39235.821467] sd 0:0:0:0: [sda] Starting disk
[39235.882714] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39235.899170] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39235.915594] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39236.002460] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39236.082430] usb 1-1.8: device descriptor read/64, error -32
[39236.137376] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39236.138271] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39236.138276] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39236.140658] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39236.140663] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39236.142113] ata1.00: configured for UDMA/133
[39236.154611] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39236.270403] usb 1-1.8: device descriptor read/64, error -32
[39236.414561] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39236.458400] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39236.538398] usb 1-1.8: device descriptor read/64, error -32
[39236.674644] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39236.726394] usb 1-1.8: device descriptor read/64, error -32
[39236.914465] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39237.102407] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39237.136226] PM: resume of devices complete after 1315.966 msecs
[39237.136309] usb 2-4:1.0: rebind failed: -517
[39237.136314] usb 2-4:1.1: rebind failed: -517
[39237.136562] PM: Finishing wakeup.
[39237.136563] OOM killer enabled.
[39237.136564] Restarting tasks ... 
[39237.149385] Bluetooth: hci0: read Intel version: 370710018002030d00
[39237.149519] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39237.161569] done.
[39237.334406] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39237.542643] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39237.785594] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39237.848604] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39264.305718] PM: Syncing filesystems ... done.
[39264.323606] PM: Preparing system for sleep (mem)
[39264.324030] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39264.326221] OOM killer disabled.
[39264.326222] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39264.327642] PM: Suspending system (mem)
[39264.327676] Suspending console(s) (use no_console_suspend to debug)
[39264.515776] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39264.517150] sd 0:0:0:0: [sda] Stopping disk
[39264.768869] PM: suspend of devices complete after 441.027 msecs
[39264.786086] PM: late suspend of devices complete after 17.209 msecs
[39264.806775] PM: noirq suspend of devices complete after 20.681 msecs
[39264.807514] ACPI: Preparing to enter system sleep state S3
[39265.062047] ACPI: EC: event blocked
[39265.062048] ACPI: EC: EC stopped
[39265.062049] PM: Saving platform NVS memory
[39265.062080] Disabling non-boot CPUs ...
[39265.080414] smpboot: CPU 1 is now offline
[39265.104383] smpboot: CPU 2 is now offline
[39265.127543] smpboot: CPU 3 is now offline
[39265.129810] ACPI: Low-level resume complete
[39265.129889] ACPI: EC: EC started
[39265.129889] PM: Restoring platform NVS memory
[39265.130233] Suspended for 2.760 seconds
[39265.130304] Enabling non-boot CPUs ...
[39265.130381] x86: Booting SMP configuration:
[39265.130382] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39265.131126]  cache: parent cpu1 should not be sleeping
[39265.131340] CPU1 is up
[39265.131395] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39265.132040]  cache: parent cpu2 should not be sleeping
[39265.132300] CPU2 is up
[39265.132339] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39265.132968]  cache: parent cpu3 should not be sleeping
[39265.133317] CPU3 is up
[39265.137930] ACPI: Waking up from system sleep state S3
[39266.061359] PM: noirq resume of devices complete after 21.026 msecs
[39266.062152] PM: early resume of devices complete after 0.749 msecs
[39266.062385] ACPI: EC: event unblocked
[39266.063264] sd 0:0:0:0: [sda] Starting disk
[39266.124532] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39266.140699] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39266.156843] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39266.208345] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39266.288324] usb 1-1.8: device descriptor read/64, error -32
[39266.379322] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39266.380206] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39266.380210] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39266.382540] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39266.382545] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39266.383970] ata1.00: configured for UDMA/133
[39266.392502] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39266.476284] usb 1-1.8: device descriptor read/64, error -32
[39266.652490] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39266.664312] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39266.744312] usb 1-1.8: device descriptor read/64, error -32
[39266.912546] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39266.932330] usb 1-1.8: device descriptor read/64, error -32
[39267.120353] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39267.308304] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39267.342793] PM: resume of devices complete after 1280.652 msecs
[39267.342880] usb 2-4:1.0: rebind failed: -517
[39267.342886] usb 2-4:1.1: rebind failed: -517
[39267.343152] PM: Finishing wakeup.
[39267.343153] OOM killer enabled.
[39267.343154] Restarting tasks ... done.
[39267.370263] Bluetooth: hci0: read Intel version: 370710018002030d00
[39267.370270] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39267.563331] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39267.771291] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39268.009112] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39268.091342] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39294.561857] PM: Syncing filesystems ... done.
[39294.580141] PM: Preparing system for sleep (mem)
[39294.580822] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39294.583867] OOM killer disabled.
[39294.583868] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39294.585309] PM: Suspending system (mem)
[39294.585343] Suspending console(s) (use no_console_suspend to debug)
[39294.762982] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39294.764062] sd 0:0:0:0: [sda] Stopping disk
[39295.014823] PM: suspend of devices complete after 429.311 msecs
[39295.031949] PM: late suspend of devices complete after 17.118 msecs
[39295.052605] PM: noirq suspend of devices complete after 20.646 msecs
[39295.053350] ACPI: Preparing to enter system sleep state S3
[39295.307957] ACPI: EC: event blocked
[39295.307959] ACPI: EC: EC stopped
[39295.307960] PM: Saving platform NVS memory
[39295.307990] Disabling non-boot CPUs ...
[39295.326330] smpboot: CPU 1 is now offline
[39295.350278] smpboot: CPU 2 is now offline
[39295.373438] smpboot: CPU 3 is now offline
[39295.375742] ACPI: Low-level resume complete
[39295.375822] ACPI: EC: EC started
[39295.375822] PM: Restoring platform NVS memory
[39295.376166] Suspended for 3.755 seconds
[39295.376227] Enabling non-boot CPUs ...
[39295.376326] x86: Booting SMP configuration:
[39295.376328] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39295.377072]  cache: parent cpu1 should not be sleeping
[39295.377287] CPU1 is up
[39295.377330] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39295.377978]  cache: parent cpu2 should not be sleeping
[39295.378257] CPU2 is up
[39295.378288] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39295.378922]  cache: parent cpu3 should not be sleeping
[39295.379276] CPU3 is up
[39295.383889] ACPI: Waking up from system sleep state S3
[39296.307272] PM: noirq resume of devices complete after 21.016 msecs
[39296.308067] PM: early resume of devices complete after 0.751 msecs
[39296.308255] ACPI: EC: event unblocked
[39296.308943] sd 0:0:0:0: [sda] Starting disk
[39296.370577] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39296.387280] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39296.404089] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39296.454235] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39296.621006] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39296.621891] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39296.621894] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39296.624314] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39296.624332] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39296.625779] ata1.00: configured for UDMA/133
[39296.642260] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39296.642418] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39296.902502] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39297.162402] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39297.318532] PM: resume of devices complete after 1010.473 msecs
[39297.318629] usb 2-4:1.0: rebind failed: -517
[39297.318634] usb 2-4:1.1: rebind failed: -517
[39297.319044] PM: Finishing wakeup.
[39297.319046] OOM killer enabled.
[39297.319047] Restarting tasks ... 
[39297.333254] Bluetooth: hci0: read Intel version: 370710018002030d00
[39297.333381] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39297.346610] done.
[39297.516320] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39297.711069] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39297.955151] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39298.041237] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39324.800745] PM: Syncing filesystems ... done.
[39324.820379] PM: Preparing system for sleep (mem)
[39324.820806] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39324.823358] OOM killer disabled.
[39324.823359] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39324.824783] PM: Suspending system (mem)
[39324.824817] Suspending console(s) (use no_console_suspend to debug)
[39325.001306] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39325.002598] sd 0:0:0:0: [sda] Stopping disk
[39325.256841] PM: suspend of devices complete after 431.857 msecs
[39325.274115] PM: late suspend of devices complete after 17.261 msecs
[39325.294659] PM: noirq suspend of devices complete after 20.536 msecs
[39325.295397] ACPI: Preparing to enter system sleep state S3
[39325.549875] ACPI: EC: event blocked
[39325.549876] ACPI: EC: EC stopped
[39325.549877] PM: Saving platform NVS memory
[39325.549908] Disabling non-boot CPUs ...
[39325.568264] smpboot: CPU 1 is now offline
[39325.587433] smpboot: CPU 2 is now offline
[39325.611357] smpboot: CPU 3 is now offline
[39325.613648] ACPI: Low-level resume complete
[39325.613728] ACPI: EC: EC started
[39325.613728] PM: Restoring platform NVS memory
[39325.614072] Suspended for 2.764 seconds
[39325.614121] Enabling non-boot CPUs ...
[39325.614167] x86: Booting SMP configuration:
[39325.614168] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39325.614912]  cache: parent cpu1 should not be sleeping
[39325.615129] CPU1 is up
[39325.615211] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39325.615857]  cache: parent cpu2 should not be sleeping
[39325.616104] CPU2 is up
[39325.616158] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39325.616789]  cache: parent cpu3 should not be sleeping
[39325.617146] CPU3 is up
[39325.621761] ACPI: Waking up from system sleep state S3
[39326.545132] PM: noirq resume of devices complete after 20.975 msecs
[39326.545710] PM: early resume of devices complete after 0.539 msecs
[39326.545881] ACPI: EC: event unblocked
[39326.546459] sd 0:0:0:0: [sda] Starting disk
[39326.608624] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39326.625288] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39326.641954] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39326.692177] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39326.772167] usb 1-1.8: device descriptor read/64, error -32
[39326.859127] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39326.860011] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39326.860015] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39326.862436] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39326.862439] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39326.863852] ata1.00: configured for UDMA/133
[39326.880326] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39326.960143] usb 1-1.8: device descriptor read/64, error -32
[39327.140367] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39327.148141] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39327.228139] usb 1-1.8: device descriptor read/64, error -32
[39327.400311] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39327.416150] usb 1-1.8: device descriptor read/64, error -32
[39327.604162] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39327.792143] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39327.826345] PM: resume of devices complete after 1280.647 msecs
[39327.826435] usb 2-4:1.0: rebind failed: -517
[39327.826439] usb 2-4:1.1: rebind failed: -517
[39327.826696] PM: Finishing wakeup.
[39327.826697] OOM killer enabled.
[39327.826698] Restarting tasks ... 
[39327.839869] Bluetooth: hci0: read Intel version: 370710018002030d00
[39327.839876] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39327.855875] done.
[39328.013921] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39328.217991] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39328.460276] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39328.516490] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39355.050485] PM: Syncing filesystems ... done.
[39355.069711] PM: Preparing system for sleep (mem)
[39355.070149] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39355.072532] OOM killer disabled.
[39355.072533] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39355.073950] PM: Suspending system (mem)
[39355.073984] Suspending console(s) (use no_console_suspend to debug)
[39355.253822] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39355.255172] sd 0:0:0:0: [sda] Stopping disk
[39355.506664] PM: suspend of devices complete after 432.517 msecs
[39355.523794] PM: late suspend of devices complete after 17.123 msecs
[39355.544531] PM: noirq suspend of devices complete after 20.729 msecs
[39355.545269] ACPI: Preparing to enter system sleep state S3
[39355.799787] ACPI: EC: event blocked
[39355.799788] ACPI: EC: EC stopped
[39355.799790] PM: Saving platform NVS memory
[39355.799820] Disabling non-boot CPUs ...
[39355.818145] smpboot: CPU 1 is now offline
[39355.842133] smpboot: CPU 2 is now offline
[39355.865281] smpboot: CPU 3 is now offline
[39355.867572] ACPI: Low-level resume complete
[39355.867652] ACPI: EC: EC started
[39355.867653] PM: Restoring platform NVS memory
[39355.867998] Suspended for 3.747 seconds
[39355.868047] Enabling non-boot CPUs ...
[39355.868144] x86: Booting SMP configuration:
[39355.868146] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39355.868908]  cache: parent cpu1 should not be sleeping
[39355.869127] CPU1 is up
[39355.869171] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39355.869819]  cache: parent cpu2 should not be sleeping
[39355.870100] CPU2 is up
[39355.870131] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39355.870760]  cache: parent cpu3 should not be sleeping
[39355.871107] CPU3 is up
[39355.875723] ACPI: Waking up from system sleep state S3
[39356.799120] PM: noirq resume of devices complete after 21.035 msecs
[39356.799693] PM: early resume of devices complete after 0.530 msecs
[39356.799953] ACPI: EC: event unblocked
[39356.800759] sd 0:0:0:0: [sda] Starting disk
[39356.862168] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39356.878227] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39356.894276] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39356.946073] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39357.026067] usb 1-1.8: device descriptor read/64, error -32
[39357.112645] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39357.113517] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39357.113521] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39357.115949] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39357.115953] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39357.117430] ata1.00: configured for UDMA/133
[39357.130285] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39357.214066] usb 1-1.8: device descriptor read/64, error -32
[39357.390287] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39357.402043] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39357.482063] usb 1-1.8: device descriptor read/64, error -32
[39357.650271] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39357.670059] usb 1-1.8: device descriptor read/64, error -32
[39357.858067] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39358.046111] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39358.080881] PM: resume of devices complete after 1281.198 msecs
[39358.080970] usb 2-4:1.0: rebind failed: -517
[39358.080975] usb 2-4:1.1: rebind failed: -517
[39358.081242] PM: Finishing wakeup.
[39358.081243] OOM killer enabled.
[39358.081244] Restarting tasks ... done.
[39358.111819] Bluetooth: hci0: read Intel version: 370710018002030d00
[39358.111951] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39358.236858] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39358.457458] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39358.695959] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39358.767618] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39385.310036] PM: Syncing filesystems ... done.
[39385.329124] PM: Preparing system for sleep (mem)
[39385.329543] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39385.332072] OOM killer disabled.
[39385.332073] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39385.333497] PM: Suspending system (mem)
[39385.333532] Suspending console(s) (use no_console_suspend to debug)
[39385.506741] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39385.508143] sd 0:0:0:0: [sda] Stopping disk
[39385.760080] PM: suspend of devices complete after 426.357 msecs
[39385.777706] PM: late suspend of devices complete after 17.616 msecs
[39385.798462] PM: noirq suspend of devices complete after 20.749 msecs
[39385.799200] ACPI: Preparing to enter system sleep state S3
[39386.053708] ACPI: EC: event blocked
[39386.053710] ACPI: EC: EC stopped
[39386.053711] PM: Saving platform NVS memory
[39386.053741] Disabling non-boot CPUs ...
[39386.072081] smpboot: CPU 1 is now offline
[39386.095282] smpboot: CPU 2 is now offline
[39386.119168] smpboot: CPU 3 is now offline
[39386.121420] ACPI: Low-level resume complete
[39386.121499] ACPI: EC: EC started
[39386.121500] PM: Restoring platform NVS memory
[39386.121845] Suspended for 2.748 seconds
[39386.121899] Enabling non-boot CPUs ...
[39386.122002] x86: Booting SMP configuration:
[39386.122004] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39386.122748]  cache: parent cpu1 should not be sleeping
[39386.122965] CPU1 is up
[39386.123008] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39386.123656]  cache: parent cpu2 should not be sleeping
[39386.123900] CPU2 is up
[39386.123930] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39386.124569]  cache: parent cpu3 should not be sleeping
[39386.124920] CPU3 is up
[39386.129540] ACPI: Waking up from system sleep state S3
[39387.053115] PM: noirq resume of devices complete after 21.115 msecs
[39387.053927] PM: early resume of devices complete after 0.766 msecs
[39387.054115] ACPI: EC: event unblocked
[39387.054811] sd 0:0:0:0: [sda] Starting disk
[39387.116128] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39387.132282] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39387.148416] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39387.200011] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39387.279969] usb 1-1.8: device descriptor read/64, error -32
[39387.366845] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39387.367719] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39387.367722] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39387.370154] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39387.370158] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39387.371572] ata1.00: configured for UDMA/133
[39387.384159] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39387.467980] usb 1-1.8: device descriptor read/64, error -32
[39387.644156] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39387.655978] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39387.735976] usb 1-1.8: device descriptor read/64, error -32
[39387.904149] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39387.923984] usb 1-1.8: device descriptor read/64, error -32
[39388.111995] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39388.299978] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39388.333720] PM: resume of devices complete after 1279.805 msecs
[39388.333810] usb 2-4:1.0: rebind failed: -517
[39388.333814] usb 2-4:1.1: rebind failed: -517
[39388.334204] PM: Finishing wakeup.
[39388.334205] OOM killer enabled.
[39388.334206] Restarting tasks ... 
[39388.353092] Bluetooth: hci0: read Intel version: 370710018002030d00
[39388.353100] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39388.364144] done.
[39388.550147] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39388.712245] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39388.959548] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39389.057759] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39415.561228] PM: Syncing filesystems ... done.
[39415.579389] PM: Preparing system for sleep (mem)
[39415.579874] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39415.582584] OOM killer disabled.
[39415.582585] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39415.583803] PM: Suspending system (mem)
[39415.583842] Suspending console(s) (use no_console_suspend to debug)
[39415.763242] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39415.764642] sd 0:0:0:0: [sda] Stopping disk
[39416.014546] PM: suspend of devices complete after 430.510 msecs
[39416.031627] PM: late suspend of devices complete after 17.074 msecs
[39416.052261] PM: noirq suspend of devices complete after 20.625 msecs
[39416.053000] ACPI: Preparing to enter system sleep state S3
[39416.307623] ACPI: EC: event blocked
[39416.307624] ACPI: EC: EC stopped
[39416.307625] PM: Saving platform NVS memory
[39416.307656] Disabling non-boot CPUs ...
[39416.326007] smpboot: CPU 1 is now offline
[39416.349956] smpboot: CPU 2 is now offline
[39416.373122] smpboot: CPU 3 is now offline
[39416.375358] ACPI: Low-level resume complete
[39416.375438] ACPI: EC: EC started
[39416.375438] PM: Restoring platform NVS memory
[39416.375786] Suspended for 2.747 seconds
[39416.375853] Enabling non-boot CPUs ...
[39416.375965] x86: Booting SMP configuration:
[39416.375967] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39416.376708]  cache: parent cpu1 should not be sleeping
[39416.376926] CPU1 is up
[39416.376967] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39416.377612]  cache: parent cpu2 should not be sleeping
[39416.377853] CPU2 is up
[39416.377903] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39416.378532]  cache: parent cpu3 should not be sleeping
[39416.378885] CPU3 is up
[39416.383499] ACPI: Waking up from system sleep state S3
[39417.307015] PM: noirq resume of devices complete after 21.101 msecs
[39417.307765] PM: early resume of devices complete after 0.707 msecs
[39417.307956] ACPI: EC: event unblocked
[39417.308636] sd 0:0:0:0: [sda] Starting disk
[39417.370178] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39417.386745] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39417.403230] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39417.453928] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39417.620862] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39417.621736] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39417.621739] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39417.624165] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39417.624168] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39417.625592] ata1.00: configured for UDMA/133
[39417.641907] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39417.642083] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39417.902167] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39418.162169] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39418.303463] PM: resume of devices complete after 995.705 msecs
[39418.303551] usb 2-4:1.0: rebind failed: -517
[39418.303556] usb 2-4:1.1: rebind failed: -517
[39418.303806] PM: Finishing wakeup.
[39418.303807] OOM killer enabled.
[39418.303808] Restarting tasks ... done.
[39418.335893] Bluetooth: hci0: read Intel version: 370710018002030d00
[39418.335959] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39418.534927] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39418.683077] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39418.923333] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39418.997904] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39445.812774] PM: Syncing filesystems ... done.
[39445.833081] PM: Preparing system for sleep (mem)
[39445.833501] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39445.835925] OOM killer disabled.
[39445.835926] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39445.837346] PM: Suspending system (mem)
[39445.837379] Suspending console(s) (use no_console_suspend to debug)
[39446.014150] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39446.015492] sd 0:0:0:0: [sda] Stopping disk
[39446.267895] PM: suspend of devices complete after 430.332 msecs
[39446.285568] PM: late suspend of devices complete after 17.666 msecs
[39446.306296] PM: noirq suspend of devices complete after 20.719 msecs
[39446.307034] ACPI: Preparing to enter system sleep state S3
[39446.561537] ACPI: EC: event blocked
[39446.561538] ACPI: EC: EC stopped
[39446.561539] PM: Saving platform NVS memory
[39446.561570] Disabling non-boot CPUs ...
[39446.579902] smpboot: CPU 1 is now offline
[39446.603858] smpboot: CPU 2 is now offline
[39446.627021] smpboot: CPU 3 is now offline
[39446.629279] ACPI: Low-level resume complete
[39446.629358] ACPI: EC: EC started
[39446.629359] PM: Restoring platform NVS memory
[39446.629702] Suspended for 3.747 seconds
[39446.629753] Enabling non-boot CPUs ...
[39446.629830] x86: Booting SMP configuration:
[39446.629831] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39446.630574]  cache: parent cpu1 should not be sleeping
[39446.630791] CPU1 is up
[39446.630846] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39446.631496]  cache: parent cpu2 should not be sleeping
[39446.631737] CPU2 is up
[39446.631791] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39446.632427]  cache: parent cpu3 should not be sleeping
[39446.632777] CPU3 is up
[39446.637392] ACPI: Waking up from system sleep state S3
[39447.560843] PM: noirq resume of devices complete after 21.028 msecs
[39447.561644] PM: early resume of devices complete after 0.757 msecs
[39447.561900] ACPI: EC: event unblocked
[39447.562741] sd 0:0:0:0: [sda] Starting disk
[39447.624104] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39447.640761] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39447.657393] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39447.743829] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39447.823843] usb 1-1.8: device descriptor read/64, error -32
[39447.874923] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39447.875808] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39447.875812] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39447.878248] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39447.878253] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39447.879717] ata1.00: configured for UDMA/133
[39447.896067] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39448.011804] usb 1-1.8: device descriptor read/64, error -32
[39448.156018] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39448.199801] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39448.279791] usb 1-1.8: device descriptor read/64, error -32
[39448.415954] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39448.467797] usb 1-1.8: device descriptor read/64, error -32
[39448.655785] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39448.843784] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39448.876448] PM: resume of devices complete after 1314.818 msecs
[39448.876515] usb 2-4:1.0: rebind failed: -517
[39448.876518] usb 2-4:1.1: rebind failed: -517
[39448.876804] PM: Finishing wakeup.
[39448.876805] OOM killer enabled.
[39448.876806] Restarting tasks ... 
[39448.889785] Bluetooth: hci0: read Intel version: 370710018002030d00
[39448.889792] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39448.902886] done.
[39449.076791] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39449.280876] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39449.545514] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39449.619294] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39476.064047] PM: Syncing filesystems ... done.
[39476.081908] PM: Preparing system for sleep (mem)
[39476.082344] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39476.084927] OOM killer disabled.
[39476.084928] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39476.086366] PM: Suspending system (mem)
[39476.086399] Suspending console(s) (use no_console_suspend to debug)
[39476.262779] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39476.264071] sd 0:0:0:0: [sda] Stopping disk
[39476.519893] PM: suspend of devices complete after 433.328 msecs
[39476.539484] PM: late suspend of devices complete after 19.585 msecs
[39476.560130] PM: noirq suspend of devices complete after 20.639 msecs
[39476.560786] ACPI: Preparing to enter system sleep state S3
[39476.815454] ACPI: EC: event blocked
[39476.815456] ACPI: EC: EC stopped
[39476.815457] PM: Saving platform NVS memory
[39476.815484] Disabling non-boot CPUs ...
[39476.833677] smpboot: CPU 1 is now offline
[39476.865024] smpboot: CPU 2 is now offline
[39476.888935] smpboot: CPU 3 is now offline
[39476.891198] ACPI: Low-level resume complete
[39476.891277] ACPI: EC: EC started
[39476.891277] PM: Restoring platform NVS memory
[39476.891624] Suspended for 2.739 seconds
[39476.891667] Enabling non-boot CPUs ...
[39476.891738] x86: Booting SMP configuration:
[39476.891739] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39476.892487]  cache: parent cpu1 should not be sleeping
[39476.892707] CPU1 is up
[39476.892804] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39476.893451]  cache: parent cpu2 should not be sleeping
[39476.893732] CPU2 is up
[39476.893762] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39476.894393]  cache: parent cpu3 should not be sleeping
[39476.894742] CPU3 is up
[39476.899355] ACPI: Waking up from system sleep state S3
[39477.826778] PM: noirq resume of devices complete after 21.047 msecs
[39477.827617] PM: early resume of devices complete after 0.797 msecs
[39477.827790] ACPI: EC: event unblocked
[39477.828703] sd 0:0:0:0: [sda] Starting disk
[39477.889998] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39477.906456] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39477.922881] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39478.009736] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39478.144781] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39478.145686] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39478.145691] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39478.148085] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39478.148090] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39478.149536] ata1.00: configured for UDMA/133
[39478.161912] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39478.197729] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39478.421891] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39478.681920] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39478.836080] PM: resume of devices complete after 1008.472 msecs
[39478.836133] usb 2-4:1.0: rebind failed: -517
[39478.836136] usb 2-4:1.1: rebind failed: -517
[39478.836288] PM: Finishing wakeup.
[39478.836289] OOM killer enabled.
[39478.836290] Restarting tasks ... done.
[39478.863776] Bluetooth: hci0: read Intel version: 370710018002030d00
[39478.863840] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39479.063809] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39479.236604] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39479.488708] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39479.572525] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39506.325354] PM: Syncing filesystems ... done.
[39506.345450] PM: Preparing system for sleep (mem)
[39506.345882] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39506.348553] OOM killer disabled.
[39506.348554] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39506.350042] PM: Suspending system (mem)
[39506.350081] Suspending console(s) (use no_console_suspend to debug)
[39506.525452] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39506.526782] sd 0:0:0:0: [sda] Stopping disk
[39506.780202] PM: suspend of devices complete after 429.936 msecs
[39506.797592] PM: late suspend of devices complete after 17.379 msecs
[39506.818133] PM: noirq suspend of devices complete after 20.533 msecs
[39506.818871] ACPI: Preparing to enter system sleep state S3
[39507.073360] ACPI: EC: event blocked
[39507.073362] ACPI: EC: EC stopped
[39507.073363] PM: Saving platform NVS memory
[39507.073393] Disabling non-boot CPUs ...
[39507.091744] smpboot: CPU 1 is now offline
[39507.110918] smpboot: CPU 2 is now offline
[39507.134831] smpboot: CPU 3 is now offline
[39507.137098] ACPI: Low-level resume complete
[39507.137177] ACPI: EC: EC started
[39507.137178] PM: Restoring platform NVS memory
[39507.137526] Suspended for 3.756 seconds
[39507.137575] Enabling non-boot CPUs ...
[39507.137669] x86: Booting SMP configuration:
[39507.137670] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39507.138413]  cache: parent cpu1 should not be sleeping
[39507.138633] CPU1 is up
[39507.138674] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39507.139323]  cache: parent cpu2 should not be sleeping
[39507.139569] CPU2 is up
[39507.139601] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39507.140249]  cache: parent cpu3 should not be sleeping
[39507.140603] CPU3 is up
[39507.145216] ACPI: Waking up from system sleep state S3
[39508.068612] PM: noirq resume of devices complete after 20.958 msecs
[39508.069381] PM: early resume of devices complete after 0.725 msecs
[39508.069546] ACPI: EC: event unblocked
[39508.070421] sd 0:0:0:0: [sda] Starting disk
[39508.131988] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39508.148660] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39508.165310] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39508.251669] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39508.382583] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39508.383468] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39508.383471] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39508.385805] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39508.385809] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39508.387292] ata1.00: configured for UDMA/133
[39508.403827] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39508.439660] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39508.663893] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39508.923881] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39509.069986] PM: resume of devices complete after 1000.613 msecs
[39509.070081] usb 2-4:1.0: rebind failed: -517
[39509.070085] usb 2-4:1.1: rebind failed: -517
[39509.070465] PM: Finishing wakeup.
[39509.070467] OOM killer enabled.
[39509.070468] Restarting tasks ... 
[39509.083545] Bluetooth: hci0: read Intel version: 370710018002030d00
[39509.083552] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39509.107653] done.
[39509.257558] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39509.461782] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39509.698061] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39509.783308] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39536.570302] PM: Syncing filesystems ... done.
[39536.590153] PM: Preparing system for sleep (mem)
[39536.590571] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39536.593161] OOM killer disabled.
[39536.593161] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39536.594597] PM: Suspending system (mem)
[39536.594631] Suspending console(s) (use no_console_suspend to debug)
[39536.773251] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39536.774284] sd 0:0:0:0: [sda] Stopping disk
[39537.026117] PM: suspend of devices complete after 431.321 msecs
[39537.043432] PM: late suspend of devices complete after 17.305 msecs
[39537.064057] PM: noirq suspend of devices complete after 20.617 msecs
[39537.064795] ACPI: Preparing to enter system sleep state S3
[39537.319276] ACPI: EC: event blocked
[39537.319277] ACPI: EC: EC stopped
[39537.319278] PM: Saving platform NVS memory
[39537.319308] Disabling non-boot CPUs ...
[39537.337665] smpboot: CPU 1 is now offline
[39537.356840] smpboot: CPU 2 is now offline
[39537.380764] smpboot: CPU 3 is now offline
[39537.382991] ACPI: Low-level resume complete
[39537.383070] ACPI: EC: EC started
[39537.383071] PM: Restoring platform NVS memory
[39537.383419] Suspended for 2.756 seconds
[39537.383468] Enabling non-boot CPUs ...
[39537.383545] x86: Booting SMP configuration:
[39537.383547] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39537.384287]  cache: parent cpu1 should not be sleeping
[39537.384508] CPU1 is up
[39537.384563] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39537.385207]  cache: parent cpu2 should not be sleeping
[39537.385455] CPU2 is up
[39537.385497] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39537.386128]  cache: parent cpu3 should not be sleeping
[39537.386481] CPU3 is up
[39537.391081] ACPI: Waking up from system sleep state S3
[39538.314589] PM: noirq resume of devices complete after 21.032 msecs
[39538.315295] PM: early resume of devices complete after 0.666 msecs
[39538.315442] ACPI: EC: event unblocked
[39538.316129] sd 0:0:0:0: [sda] Starting disk
[39538.382031] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39538.398747] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39538.415454] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39538.465592] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39538.628233] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39538.629108] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39538.629112] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39538.631497] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39538.631500] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39538.632921] ata1.00: configured for UDMA/133
[39538.653575] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39538.653796] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39538.913730] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39539.173736] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39539.320221] PM: resume of devices complete after 1004.935 msecs
[39539.320318] usb 2-4:1.0: rebind failed: -517
[39539.320322] usb 2-4:1.1: rebind failed: -517
[39539.320710] PM: Finishing wakeup.
[39539.320712] OOM killer enabled.
[39539.320713] Restarting tasks ... 
[39539.333451] Bluetooth: hci0: read Intel version: 370710018002030d00
[39539.333613] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39539.338565] done.
[39539.522482] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39539.707075] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39539.947107] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39540.014003] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39566.823340] PM: Syncing filesystems ... done.
[39566.842045] PM: Preparing system for sleep (mem)
[39566.842472] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39566.844987] OOM killer disabled.
[39566.844988] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39566.846472] PM: Suspending system (mem)
[39566.846508] Suspending console(s) (use no_console_suspend to debug)
[39567.024450] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39567.025780] sd 0:0:0:0: [sda] Stopping disk
[39567.279114] PM: suspend of devices complete after 432.440 msecs
[39567.297456] PM: late suspend of devices complete after 18.319 msecs
[39567.317982] PM: noirq suspend of devices complete after 20.518 msecs
[39567.318721] ACPI: Preparing to enter system sleep state S3
[39567.573188] ACPI: EC: event blocked
[39567.573189] ACPI: EC: EC stopped
[39567.573190] PM: Saving platform NVS memory
[39567.573221] Disabling non-boot CPUs ...
[39567.591567] smpboot: CPU 1 is now offline
[39567.615535] smpboot: CPU 2 is now offline
[39567.638685] smpboot: CPU 3 is now offline
[39567.640944] ACPI: Low-level resume complete
[39567.641023] ACPI: EC: EC started
[39567.641024] PM: Restoring platform NVS memory
[39567.641368] Suspended for 2.743 seconds
[39567.641418] Enabling non-boot CPUs ...
[39567.641464] x86: Booting SMP configuration:
[39567.641465] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39567.642206]  cache: parent cpu1 should not be sleeping
[39567.642421] CPU1 is up
[39567.642510] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39567.643153]  cache: parent cpu2 should not be sleeping
[39567.643398] CPU2 is up
[39567.643445] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39567.644078]  cache: parent cpu3 should not be sleeping
[39567.644432] CPU3 is up
[39567.649046] ACPI: Waking up from system sleep state S3
[39568.572537] PM: noirq resume of devices complete after 21.060 msecs
[39568.573414] PM: early resume of devices complete after 0.833 msecs
[39568.573582] ACPI: EC: event unblocked
[39568.574442] sd 0:0:0:0: [sda] Starting disk
[39568.635795] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39568.652298] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39568.668886] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39568.719480] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39568.886419] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39568.887304] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39568.887308] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39568.889700] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39568.889704] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39568.891161] ata1.00: configured for UDMA/133
[39568.907485] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39568.907656] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39569.167717] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39569.427658] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39569.574801] PM: resume of devices complete after 1001.393 msecs
[39569.574925] usb 2-4:1.0: rebind failed: -517
[39569.574931] usb 2-4:1.1: rebind failed: -517
[39569.575462] PM: Finishing wakeup.
[39569.575464] OOM killer enabled.
[39569.575465] Restarting tasks ... 
[39569.593578] Bluetooth: hci0: read Intel version: 370710018002030d00
[39569.593585] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39569.598090] done.
[39569.776670] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39569.958853] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39570.212100] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39570.281021] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39597.081185] PM: Syncing filesystems ... done.
[39597.101192] PM: Preparing system for sleep (mem)
[39597.101848] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39597.105156] OOM killer disabled.
[39597.105157] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39597.106841] PM: Suspending system (mem)
[39597.106891] Suspending console(s) (use no_console_suspend to debug)
[39597.283490] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39597.284495] sd 0:0:0:0: [sda] Stopping disk
[39597.537945] PM: suspend of devices complete after 430.704 msecs
[39597.555104] PM: late suspend of devices complete after 17.152 msecs
[39597.575842] PM: noirq suspend of devices complete after 20.732 msecs
[39597.576580] ACPI: Preparing to enter system sleep state S3
[39597.831101] ACPI: EC: event blocked
[39597.831102] ACPI: EC: EC stopped
[39597.831104] PM: Saving platform NVS memory
[39597.831134] Disabling non-boot CPUs ...
[39597.849482] smpboot: CPU 1 is now offline
[39597.872694] smpboot: CPU 2 is now offline
[39597.896573] smpboot: CPU 3 is now offline
[39597.898865] ACPI: Low-level resume complete
[39597.898945] ACPI: EC: EC started
[39597.898945] PM: Restoring platform NVS memory
[39597.899290] Suspended for 3.743 seconds
[39597.899344] Enabling non-boot CPUs ...
[39597.899429] x86: Booting SMP configuration:
[39597.899431] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39597.900177]  cache: parent cpu1 should not be sleeping
[39597.900393] CPU1 is up
[39597.900441] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39597.901086]  cache: parent cpu2 should not be sleeping
[39597.901331] CPU2 is up
[39597.901386] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39597.902019]  cache: parent cpu3 should not be sleeping
[39597.902365] CPU3 is up
[39597.906976] ACPI: Waking up from system sleep state S3
[39598.830456] PM: noirq resume of devices complete after 21.072 msecs
[39598.831280] PM: early resume of devices complete after 0.780 msecs
[39598.831514] ACPI: EC: event unblocked
[39598.832195] sd 0:0:0:0: [sda] Starting disk
[39598.893554] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39598.909691] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39598.925748] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39599.013429] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39599.144257] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39599.145140] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39599.145144] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39599.147516] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39599.147520] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39599.149033] ata1.00: configured for UDMA/133
[39599.161579] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39599.201392] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39599.421628] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39599.681604] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39599.837098] PM: resume of devices complete after 1005.825 msecs
[39599.837203] usb 2-4:1.0: rebind failed: -517
[39599.837209] usb 2-4:1.1: rebind failed: -517
[39599.837680] PM: Finishing wakeup.
[39599.837682] OOM killer enabled.
[39599.837683] Restarting tasks ... 
[39599.850349] Bluetooth: hci0: read Intel version: 370710018002030d00
[39599.850479] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39599.867517] done.
[39600.038363] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39600.243919] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39600.485963] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39600.564968] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39627.330193] PM: Syncing filesystems ... done.
[39627.349604] PM: Preparing system for sleep (mem)
[39627.350168] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39627.352464] OOM killer disabled.
[39627.352465] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39627.353947] PM: Suspending system (mem)
[39627.353980] Suspending console(s) (use no_console_suspend to debug)
[39627.536457] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39627.537800] sd 0:0:0:0: [sda] Stopping disk
[39627.791847] PM: suspend of devices complete after 437.704 msecs
[39627.809246] PM: late suspend of devices complete after 17.388 msecs
[39627.829795] PM: noirq suspend of devices complete after 20.542 msecs
[39627.830533] ACPI: Preparing to enter system sleep state S3
[39628.085016] ACPI: EC: event blocked
[39628.085018] ACPI: EC: EC stopped
[39628.085019] PM: Saving platform NVS memory
[39628.085049] Disabling non-boot CPUs ...
[39628.103376] smpboot: CPU 1 is now offline
[39628.122589] smpboot: CPU 2 is now offline
[39628.146487] smpboot: CPU 3 is now offline
[39628.148713] ACPI: Low-level resume complete
[39628.148792] ACPI: EC: EC started
[39628.148793] PM: Restoring platform NVS memory
[39628.149137] Suspended for 2.752 seconds
[39628.149186] Enabling non-boot CPUs ...
[39628.149233] x86: Booting SMP configuration:
[39628.149234] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39628.149976]  cache: parent cpu1 should not be sleeping
[39628.150194] CPU1 is up
[39628.150285] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39628.150933]  cache: parent cpu2 should not be sleeping
[39628.151177] CPU2 is up
[39628.151208] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39628.151845]  cache: parent cpu3 should not be sleeping
[39628.152203] CPU3 is up
[39628.156818] ACPI: Waking up from system sleep state S3
[39629.080220] PM: noirq resume of devices complete after 20.923 msecs
[39629.080870] PM: early resume of devices complete after 0.610 msecs
[39629.081081] ACPI: EC: event unblocked
[39629.081794] sd 0:0:0:0: [sda] Starting disk
[39629.143193] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39629.159132] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39629.175075] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39629.263318] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39629.343291] usb 1-1.8: device descriptor read/64, error -32
[39629.394200] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39629.395085] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39629.395089] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39629.397518] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39629.397521] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39629.398981] ata1.00: configured for UDMA/133
[39629.411488] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39629.531294] usb 1-1.8: device descriptor read/64, error -32
[39629.671465] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39629.719255] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39629.799250] usb 1-1.8: device descriptor read/64, error -32
[39629.931537] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39629.987278] usb 1-1.8: device descriptor read/64, error -32
[39630.175300] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39630.363269] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39630.397743] PM: resume of devices complete after 1316.885 msecs
[39630.397841] usb 2-4:1.0: rebind failed: -517
[39630.397845] usb 2-4:1.1: rebind failed: -517
[39630.398267] PM: Finishing wakeup.
[39630.398268] OOM killer enabled.
[39630.398269] Restarting tasks ... 
[39630.411926] Bluetooth: hci0: read Intel version: 370710018002030d00
[39630.411933] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39630.420934] done.
[39630.588971] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39630.795020] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39631.045992] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39631.104453] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39657.571900] PM: Syncing filesystems ... done.
[39657.592534] PM: Preparing system for sleep (mem)
[39657.593107] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39657.596133] OOM killer disabled.
[39657.596134] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39657.597726] PM: Suspending system (mem)
[39657.597769] Suspending console(s) (use no_console_suspend to debug)
[39657.786366] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39657.787750] sd 0:0:0:0: [sda] Stopping disk
[39658.041780] PM: suspend of devices complete after 443.782 msecs
[39658.059168] PM: late suspend of devices complete after 17.375 msecs
[39658.079712] PM: noirq suspend of devices complete after 20.536 msecs
[39658.080451] ACPI: Preparing to enter system sleep state S3
[39658.334925] ACPI: EC: event blocked
[39658.334927] ACPI: EC: EC stopped
[39658.334928] PM: Saving platform NVS memory
[39658.334959] Disabling non-boot CPUs ...
[39658.353304] smpboot: CPU 1 is now offline
[39658.377244] smpboot: CPU 2 is now offline
[39658.400410] smpboot: CPU 3 is now offline
[39658.402676] ACPI: Low-level resume complete
[39658.402755] ACPI: EC: EC started
[39658.402756] PM: Restoring platform NVS memory
[39658.403101] Suspended for 3.747 seconds
[39658.403165] Enabling non-boot CPUs ...
[39658.403252] x86: Booting SMP configuration:
[39658.403254] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39658.404006]  cache: parent cpu1 should not be sleeping
[39658.404226] CPU1 is up
[39658.404275] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39658.404922]  cache: parent cpu2 should not be sleeping
[39658.405192] CPU2 is up
[39658.405227] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39658.405861]  cache: parent cpu3 should not be sleeping
[39658.406216] CPU3 is up
[39658.410836] ACPI: Waking up from system sleep state S3
[39659.338164] PM: noirq resume of devices complete after 20.950 msecs
[39659.338723] PM: early resume of devices complete after 0.516 msecs
[39659.338912] ACPI: EC: event unblocked
[39659.339524] sd 0:0:0:0: [sda] Starting disk
[39659.401430] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39659.417828] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39659.434139] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39659.521226] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39659.652041] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39659.652925] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39659.652929] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39659.655348] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39659.655352] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39659.656759] ata1.00: configured for UDMA/133
[39659.673408] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39659.709219] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39659.933402] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39660.193406] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39660.340399] PM: resume of devices complete after 1001.684 msecs
[39660.340490] usb 2-4:1.0: rebind failed: -517
[39660.340495] usb 2-4:1.1: rebind failed: -517
[39660.340745] PM: Finishing wakeup.
[39660.340747] OOM killer enabled.
[39660.340748] Restarting tasks ... done.
[39660.377866] Bluetooth: hci0: read Intel version: 370710018002030d00
[39660.377930] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39660.498908] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39660.713798] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39660.963057] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39661.042429] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39687.830316] PM: Syncing filesystems ... done.
[39687.849168] PM: Preparing system for sleep (mem)
[39687.849950] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39687.852786] OOM killer disabled.
[39687.852787] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39687.854208] PM: Suspending system (mem)
[39687.854242] Suspending console(s) (use no_console_suspend to debug)
[39688.036005] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39688.037176] sd 0:0:0:0: [sda] Stopping disk
[39688.287680] PM: suspend of devices complete after 433.273 msecs
[39688.304842] PM: late suspend of devices complete after 17.155 msecs
[39688.325572] PM: noirq suspend of devices complete after 20.722 msecs
[39688.326310] ACPI: Preparing to enter system sleep state S3
[39688.580839] ACPI: EC: event blocked
[39688.580840] ACPI: EC: EC stopped
[39688.580841] PM: Saving platform NVS memory
[39688.580873] Disabling non-boot CPUs ...
[39688.599222] smpboot: CPU 1 is now offline
[39688.622449] smpboot: CPU 2 is now offline
[39688.646313] smpboot: CPU 3 is now offline
[39688.648532] ACPI: Low-level resume complete
[39688.648611] ACPI: EC: EC started
[39688.648612] PM: Restoring platform NVS memory
[39688.648957] Suspended for 2.756 seconds
[39688.649006] Enabling non-boot CPUs ...
[39688.649082] x86: Booting SMP configuration:
[39688.649083] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39688.649826]  cache: parent cpu1 should not be sleeping
[39688.650042] CPU1 is up
[39688.650084] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39688.650735]  cache: parent cpu2 should not be sleeping
[39688.650993] CPU2 is up
[39688.651043] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39688.651676]  cache: parent cpu3 should not be sleeping
[39688.652047] CPU3 is up
[39688.656660] ACPI: Waking up from system sleep state S3
[39689.579874] PM: noirq resume of devices complete after 20.747 msecs
[39689.580655] PM: early resume of devices complete after 0.737 msecs
[39689.580825] ACPI: EC: event unblocked
[39689.581742] sd 0:0:0:0: [sda] Starting disk
[39689.643423] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39689.659883] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39689.676328] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39689.755144] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39689.894104] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39689.894955] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39689.894966] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39689.897308] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39689.897311] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39689.898747] ata1.00: configured for UDMA/133
[39689.915367] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39689.943136] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39690.175349] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39690.435308] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39690.582117] PM: resume of devices complete after 1001.469 msecs
[39690.582220] usb 2-4:1.0: rebind failed: -517
[39690.582225] usb 2-4:1.1: rebind failed: -517
[39690.582639] PM: Finishing wakeup.
[39690.582641] OOM killer enabled.
[39690.582642] Restarting tasks ... 
[39690.595760] Bluetooth: hci0: read Intel version: 370710018002030d00
[39690.595767] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39690.603112] done.
[39690.784794] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39690.970188] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39691.216112] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39691.281018] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39718.087051] PM: Syncing filesystems ... done.
[39718.121678] PM: Preparing system for sleep (mem)
[39718.122092] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39718.124588] OOM killer disabled.
[39718.124588] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39718.126033] PM: Suspending system (mem)
[39718.126067] Suspending console(s) (use no_console_suspend to debug)
[39718.306528] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39718.307787] sd 0:0:0:0: [sda] Stopping disk
[39718.561152] PM: suspend of devices complete after 434.919 msecs
[39718.578754] PM: late suspend of devices complete after 17.591 msecs
[39718.599472] PM: noirq suspend of devices complete after 20.710 msecs
[39718.600210] ACPI: Preparing to enter system sleep state S3
[39718.854747] ACPI: EC: event blocked
[39718.854749] ACPI: EC: EC stopped
[39718.854750] PM: Saving platform NVS memory
[39718.854780] Disabling non-boot CPUs ...
[39718.873128] smpboot: CPU 1 is now offline
[39718.896360] smpboot: CPU 2 is now offline
[39718.920242] smpboot: CPU 3 is now offline
[39718.922494] ACPI: Low-level resume complete
[39718.922573] ACPI: EC: EC started
[39718.922574] PM: Restoring platform NVS memory
[39718.922919] Suspended for 2.727 seconds
[39718.922972] Enabling non-boot CPUs ...
[39718.923065] x86: Booting SMP configuration:
[39718.923066] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39718.923811]  cache: parent cpu1 should not be sleeping
[39718.924033] CPU1 is up
[39718.924081] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39718.924728]  cache: parent cpu2 should not be sleeping
[39718.924975] CPU2 is up
[39718.925030] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39718.925665]  cache: parent cpu3 should not be sleeping
[39718.926023] CPU3 is up
[39718.930632] ACPI: Waking up from system sleep state S3
[39719.854036] PM: noirq resume of devices complete after 20.997 msecs
[39719.854846] PM: early resume of devices complete after 0.767 msecs
[39719.855015] ACPI: EC: event unblocked
[39719.855985] sd 0:0:0:0: [sda] Starting disk
[39719.917098] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39719.933145] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39719.949190] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39720.037054] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39720.167840] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39720.168718] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39720.168729] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39720.171058] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39720.171061] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39720.172527] ata1.00: configured for UDMA/133
[39720.185214] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39720.225039] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39720.445219] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39720.705212] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39720.851150] PM: resume of devices complete after 996.312 msecs
[39720.851230] usb 2-4:1.0: rebind failed: -517
[39720.851234] usb 2-4:1.1: rebind failed: -517
[39720.851451] PM: Finishing wakeup.
[39720.851452] OOM killer enabled.
[39720.851453] Restarting tasks ... done.
[39720.887024] Bluetooth: hci0: read Intel version: 370710018002030d00
[39720.887094] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39721.094036] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39721.270164] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39721.519617] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39721.596684] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39748.337450] PM: Syncing filesystems ... done.
[39748.356916] PM: Preparing system for sleep (mem)
[39748.357402] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39748.360298] OOM killer disabled.
[39748.360298] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39748.361861] PM: Suspending system (mem)
[39748.361902] Suspending console(s) (use no_console_suspend to debug)
[39748.551747] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39748.552997] sd 0:0:0:0: [sda] Stopping disk
[39748.803541] PM: suspend of devices complete after 441.423 msecs
[39748.820882] PM: late suspend of devices complete after 17.329 msecs
[39748.841438] PM: noirq suspend of devices complete after 20.544 msecs
[39748.842176] ACPI: Preparing to enter system sleep state S3
[39749.096664] ACPI: EC: event blocked
[39749.096665] ACPI: EC: EC stopped
[39749.096666] PM: Saving platform NVS memory
[39749.096697] Disabling non-boot CPUs ...
[39749.115054] smpboot: CPU 1 is now offline
[39749.134226] smpboot: CPU 2 is now offline
[39749.158129] smpboot: CPU 3 is now offline
[39749.160391] ACPI: Low-level resume complete
[39749.160471] ACPI: EC: EC started
[39749.160471] PM: Restoring platform NVS memory
[39749.160816] Suspended for 3.764 seconds
[39749.160869] Enabling non-boot CPUs ...
[39749.160946] x86: Booting SMP configuration:
[39749.160947] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39749.161691]  cache: parent cpu1 should not be sleeping
[39749.161910] CPU1 is up
[39749.161964] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39749.162611]  cache: parent cpu2 should not be sleeping
[39749.162854] CPU2 is up
[39749.162890] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39749.163522]  cache: parent cpu3 should not be sleeping
[39749.163872] CPU3 is up
[39749.168470] ACPI: Waking up from system sleep state S3
[39750.091888] PM: noirq resume of devices complete after 20.932 msecs
[39750.092684] PM: early resume of devices complete after 0.753 msecs
[39750.092855] ACPI: EC: event unblocked
[39750.093826] sd 0:0:0:0: [sda] Starting disk
[39750.155212] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39750.171682] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39750.188107] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39750.274972] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39750.405847] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39750.406730] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39750.406734] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39750.409105] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39750.409110] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39750.410559] ata1.00: configured for UDMA/133
[39750.427162] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39750.462958] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39750.691172] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39750.951160] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39751.097271] PM: resume of devices complete after 1004.594 msecs
[39751.097381] usb 2-4:1.0: rebind failed: -517
[39751.097386] usb 2-4:1.1: rebind failed: -517
[39751.097854] PM: Finishing wakeup.
[39751.097856] OOM killer enabled.
[39751.097857] Restarting tasks ... 
[39751.110827] Bluetooth: hci0: read Intel version: 370710018002030d00
[39751.110834] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39751.133410] done.
[39751.290841] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39751.494834] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39751.741437] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39751.819577] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39778.582762] PM: Syncing filesystems ... done.
[39778.617165] PM: Preparing system for sleep (mem)
[39778.617760] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39778.620874] OOM killer disabled.
[39778.620875] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39778.622486] PM: Suspending system (mem)
[39778.622556] Suspending console(s) (use no_console_suspend to debug)
[39778.798471] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39778.799831] sd 0:0:0:0: [sda] Stopping disk
[39779.049433] PM: suspend of devices complete after 426.698 msecs
[39779.066586] PM: late suspend of devices complete after 17.144 msecs
[39779.087312] PM: noirq suspend of devices complete after 20.719 msecs
[39779.088050] ACPI: Preparing to enter system sleep state S3
[39779.342578] ACPI: EC: event blocked
[39779.342580] ACPI: EC: EC stopped
[39779.342581] PM: Saving platform NVS memory
[39779.342611] Disabling non-boot CPUs ...
[39779.360942] smpboot: CPU 1 is now offline
[39779.380161] smpboot: CPU 2 is now offline
[39779.404065] smpboot: CPU 3 is now offline
[39779.406359] ACPI: Low-level resume complete
[39779.406437] ACPI: EC: EC started
[39779.406438] PM: Restoring platform NVS memory
[39779.406782] Suspended for 2.755 seconds
[39779.406831] Enabling non-boot CPUs ...
[39779.406876] x86: Booting SMP configuration:
[39779.406877] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39779.407622]  cache: parent cpu1 should not be sleeping
[39779.407840] CPU1 is up
[39779.407935] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39779.408580]  cache: parent cpu2 should not be sleeping
[39779.408862] CPU2 is up
[39779.408894] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39779.409527]  cache: parent cpu3 should not be sleeping
[39779.409892] CPU3 is up
[39779.414506] ACPI: Waking up from system sleep state S3
[39780.337935] PM: noirq resume of devices complete after 21.064 msecs
[39780.338668] PM: early resume of devices complete after 0.690 msecs
[39780.338859] ACPI: EC: event unblocked
[39780.339796] sd 0:0:0:0: [sda] Starting disk
[39780.401105] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39780.417697] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39780.434375] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39780.484888] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39780.564875] usb 1-1.8: device descriptor read/64, error -32
[39780.651866] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39780.652752] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39780.652755] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39780.655188] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39780.655191] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39780.656635] ata1.00: configured for UDMA/133
[39780.673096] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39780.752821] usb 1-1.8: device descriptor read/64, error -32
[39780.933046] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39780.940877] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39781.020864] usb 1-1.8: device descriptor read/64, error -32
[39781.193040] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39781.208859] usb 1-1.8: device descriptor read/64, error -32
[39781.396887] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39781.584850] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39781.619885] PM: resume of devices complete after 1281.228 msecs
[39781.620003] usb 2-4:1.0: rebind failed: -517
[39781.620008] usb 2-4:1.1: rebind failed: -517
[39781.620529] PM: Finishing wakeup.
[39781.620531] OOM killer enabled.
[39781.620532] Restarting tasks ... 
[39781.634507] Bluetooth: hci0: read Intel version: 370710018002030d00
[39781.634637] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39781.641336] done.
[39781.809895] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39781.993457] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39782.251476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39782.313172] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39808.840126] PM: Syncing filesystems ... done.
[39808.859176] PM: Preparing system for sleep (mem)
[39808.859765] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39808.863097] OOM killer disabled.
[39808.863098] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39808.864788] PM: Suspending system (mem)
[39808.864841] Suspending console(s) (use no_console_suspend to debug)
[39809.050440] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39809.051919] sd 0:0:0:0: [sda] Stopping disk
[39809.303382] PM: suspend of devices complete after 438.293 msecs
[39809.320718] PM: late suspend of devices complete after 17.325 msecs
[39809.341296] PM: noirq suspend of devices complete after 20.568 msecs
[39809.342034] ACPI: Preparing to enter system sleep state S3
[39809.596495] ACPI: EC: event blocked
[39809.596497] ACPI: EC: EC stopped
[39809.596498] PM: Saving platform NVS memory
[39809.596532] Disabling non-boot CPUs ...
[39809.614882] smpboot: CPU 1 is now offline
[39809.638130] smpboot: CPU 2 is now offline
[39809.661989] smpboot: CPU 3 is now offline
[39809.664245] ACPI: Low-level resume complete
[39809.664324] ACPI: EC: EC started
[39809.664324] PM: Restoring platform NVS memory
[39809.664669] Suspended for 3.744 seconds
[39809.664722] Enabling non-boot CPUs ...
[39809.664808] x86: Booting SMP configuration:
[39809.664810] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39809.665553]  cache: parent cpu1 should not be sleeping
[39809.665773] CPU1 is up
[39809.665823] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39809.666468]  cache: parent cpu2 should not be sleeping
[39809.666717] CPU2 is up
[39809.666764] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39809.667396]  cache: parent cpu3 should not be sleeping
[39809.667745] CPU3 is up
[39809.672360] ACPI: Waking up from system sleep state S3
[39810.595736] PM: noirq resume of devices complete after 20.960 msecs
[39810.596360] PM: early resume of devices complete after 0.585 msecs
[39810.596597] ACPI: EC: event unblocked
[39810.597416] sd 0:0:0:0: [sda] Starting disk
[39810.659711] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39810.676659] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39810.693528] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39810.750831] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39810.830810] usb 1-1.8: device descriptor read/64, error -32
[39810.909663] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39810.910537] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39810.910541] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39810.912938] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39810.912941] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39810.914388] ata1.00: configured for UDMA/133
[39810.930968] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39811.018765] usb 1-1.8: device descriptor read/64, error -32
[39811.190925] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39811.206774] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39811.286772] usb 1-1.8: device descriptor read/64, error -32
[39811.450946] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39811.474733] usb 1-1.8: device descriptor read/64, error -32
[39811.662785] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39811.850756] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39811.884931] PM: resume of devices complete after 1288.583 msecs
[39811.885010] usb 2-4:1.0: rebind failed: -517
[39811.885015] usb 2-4:1.1: rebind failed: -517
[39811.885259] PM: Finishing wakeup.
[39811.885260] OOM killer enabled.
[39811.885261] Restarting tasks ... 
[39811.898466] Bluetooth: hci0: read Intel version: 370710018002030d00
[39811.898473] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39811.906749] done.
[39812.057517] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39812.255357] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39812.499197] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39812.568960] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39839.082645] PM: Syncing filesystems ... done.
[39839.102417] PM: Preparing system for sleep (mem)
[39839.102846] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39839.105387] OOM killer disabled.
[39839.105388] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39839.106504] PM: Suspending system (mem)
[39839.106539] Suspending console(s) (use no_console_suspend to debug)
[39839.286510] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39839.287980] sd 0:0:0:0: [sda] Stopping disk
[39839.537222] PM: suspend of devices complete after 430.516 msecs
[39839.554407] PM: late suspend of devices complete after 17.161 msecs
[39839.575159] PM: noirq suspend of devices complete after 20.744 msecs
[39839.575898] ACPI: Preparing to enter system sleep state S3
[39839.830408] ACPI: EC: event blocked
[39839.830410] ACPI: EC: EC stopped
[39839.830411] PM: Saving platform NVS memory
[39839.830442] Disabling non-boot CPUs ...
[39839.848782] smpboot: CPU 1 is now offline
[39839.872749] smpboot: CPU 2 is now offline
[39839.895908] smpboot: CPU 3 is now offline
[39839.898201] ACPI: Low-level resume complete
[39839.898280] ACPI: EC: EC started
[39839.898281] PM: Restoring platform NVS memory
[39839.898625] Suspended for 2.767 seconds
[39839.898691] Enabling non-boot CPUs ...
[39839.898737] x86: Booting SMP configuration:
[39839.898739] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39839.899482]  cache: parent cpu1 should not be sleeping
[39839.899703] CPU1 is up
[39839.899798] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39839.900444]  cache: parent cpu2 should not be sleeping
[39839.900729] CPU2 is up
[39839.900760] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39839.901394]  cache: parent cpu3 should not be sleeping
[39839.901750] CPU3 is up
[39839.906365] ACPI: Waking up from system sleep state S3
[39840.829656] PM: noirq resume of devices complete after 20.960 msecs
[39840.830456] PM: early resume of devices complete after 0.757 msecs
[39840.830685] ACPI: EC: event unblocked
[39840.831403] sd 0:0:0:0: [sda] Starting disk
[39840.893395] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39840.910082] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39840.926764] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39840.976704] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39841.143463] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39841.144337] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39841.144341] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39841.146679] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39841.146682] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39841.148108] ata1.00: configured for UDMA/133
[39841.164745] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39841.164940] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39841.424839] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39841.684903] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39841.840843] PM: resume of devices complete after 1010.393 msecs
[39841.840960] usb 2-4:1.0: rebind failed: -517
[39841.840966] usb 2-4:1.1: rebind failed: -517
[39841.841468] PM: Finishing wakeup.
[39841.841470] OOM killer enabled.
[39841.841471] Restarting tasks ... 
[39841.856517] Bluetooth: hci0: read Intel version: 370710018002030d00
[39841.856660] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39841.876236] done.
[39842.036576] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39842.241667] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39842.480860] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39842.546224] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39869.347105] PM: Syncing filesystems ... done.
[39869.371345] PM: Preparing system for sleep (mem)
[39869.372006] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39869.375819] OOM killer disabled.
[39869.375820] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39869.377629] PM: Suspending system (mem)
[39869.377690] Suspending console(s) (use no_console_suspend to debug)
[39869.556858] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39869.558209] sd 0:0:0:0: [sda] Stopping disk
[39869.807159] PM: suspend of devices complete after 429.174 msecs
[39869.824335] PM: late suspend of devices complete after 17.152 msecs
[39869.845071] PM: noirq suspend of devices complete after 20.728 msecs
[39869.845810] ACPI: Preparing to enter system sleep state S3
[39870.100321] ACPI: EC: event blocked
[39870.100322] ACPI: EC: EC stopped
[39870.100323] PM: Saving platform NVS memory
[39870.100352] Disabling non-boot CPUs ...
[39870.118696] smpboot: CPU 1 is now offline
[39870.137899] smpboot: CPU 2 is now offline
[39870.161794] smpboot: CPU 3 is now offline
[39870.164086] ACPI: Low-level resume complete
[39870.164165] ACPI: EC: EC started
[39870.164166] PM: Restoring platform NVS memory
[39870.164510] Suspended for 2.736 seconds
[39870.164559] Enabling non-boot CPUs ...
[39870.164663] x86: Booting SMP configuration:
[39870.164664] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39870.165407]  cache: parent cpu1 should not be sleeping
[39870.165623] CPU1 is up
[39870.165665] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39870.166309]  cache: parent cpu2 should not be sleeping
[39870.166554] CPU2 is up
[39870.166602] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39870.167233]  cache: parent cpu3 should not be sleeping
[39870.167586] CPU3 is up
[39870.172203] ACPI: Waking up from system sleep state S3
[39871.095654] PM: noirq resume of devices complete after 21.047 msecs
[39871.096539] PM: early resume of devices complete after 0.841 msecs
[39871.096710] ACPI: EC: event unblocked
[39871.097422] sd 0:0:0:0: [sda] Starting disk
[39871.159087] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39871.175658] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39871.192352] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39871.250621] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39871.409602] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39871.410477] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39871.410481] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39871.412884] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39871.412888] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39871.414297] ata1.00: configured for UDMA/133
[39871.430865] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39871.438621] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39871.690811] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39871.950882] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39872.097037] PM: resume of devices complete after 1000.506 msecs
[39872.097127] usb 2-4:1.0: rebind failed: -517
[39872.097132] usb 2-4:1.1: rebind failed: -517
[39872.097384] PM: Finishing wakeup.
[39872.097385] OOM killer enabled.
[39872.097387] Restarting tasks ... 
[39872.110670] Bluetooth: hci0: read Intel version: 370710018002030d00
[39872.110677] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39872.132551] done.
[39872.287703] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39872.476506] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39872.721902] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39872.792163] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39899.593008] PM: Syncing filesystems ... done.
[39899.614185] PM: Preparing system for sleep (mem)
[39899.614562] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39899.616970] OOM killer disabled.
[39899.616970] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39899.618385] PM: Suspending system (mem)
[39899.618419] Suspending console(s) (use no_console_suspend to debug)
[39899.800666] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39899.801865] sd 0:0:0:0: [sda] Stopping disk
[39900.053142] PM: suspend of devices complete after 434.555 msecs
[39900.070457] PM: late suspend of devices complete after 17.302 msecs
[39900.091037] PM: noirq suspend of devices complete after 20.571 msecs
[39900.091775] ACPI: Preparing to enter system sleep state S3
[39900.346238] ACPI: EC: event blocked
[39900.346239] ACPI: EC: EC stopped
[39900.346241] PM: Saving platform NVS memory
[39900.346271] Disabling non-boot CPUs ...
[39900.364604] smpboot: CPU 1 is now offline
[39900.388581] smpboot: CPU 2 is now offline
[39900.411731] smpboot: CPU 3 is now offline
[39900.414013] ACPI: Low-level resume complete
[39900.414092] ACPI: EC: EC started
[39900.414092] PM: Restoring platform NVS memory
[39900.414440] Suspended for 3.751 seconds
[39900.414489] Enabling non-boot CPUs ...
[39900.414599] x86: Booting SMP configuration:
[39900.414600] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39900.415342]  cache: parent cpu1 should not be sleeping
[39900.415560] CPU1 is up
[39900.415602] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39900.416246]  cache: parent cpu2 should not be sleeping
[39900.416529] CPU2 is up
[39900.416558] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39900.417190]  cache: parent cpu3 should not be sleeping
[39900.417544] CPU3 is up
[39900.422156] ACPI: Waking up from system sleep state S3
[39901.345585] PM: noirq resume of devices complete after 21.056 msecs
[39901.346401] PM: early resume of devices complete after 0.770 msecs
[39901.346573] ACPI: EC: event unblocked
[39901.347287] sd 0:0:0:0: [sda] Starting disk
[39901.408933] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39901.425422] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39901.442042] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39901.492549] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39901.659586] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39901.660453] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39901.660456] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39901.662838] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39901.662842] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39901.664263] ata1.00: configured for UDMA/133
[39901.680524] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39901.680709] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39901.940702] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39902.200719] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39902.347679] PM: resume of devices complete after 1001.286 msecs
[39902.347770] usb 2-4:1.0: rebind failed: -517
[39902.347775] usb 2-4:1.1: rebind failed: -517
[39902.348025] PM: Finishing wakeup.
[39902.348026] OOM killer enabled.
[39902.348027] Restarting tasks ... 
[39902.362579] Bluetooth: hci0: read Intel version: 370710018002030d00
[39902.362763] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39902.369436] done.
[39902.536599] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39902.724240] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39902.967055] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39903.033828] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39929.843378] PM: Syncing filesystems ... done.
[39929.863208] PM: Preparing system for sleep (mem)
[39929.863652] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39929.866192] OOM killer disabled.
[39929.866193] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39929.867636] PM: Suspending system (mem)
[39929.867670] Suspending console(s) (use no_console_suspend to debug)
[39930.047239] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39930.048417] sd 0:0:0:0: [sda] Stopping disk
[39930.298987] PM: suspend of devices complete after 431.152 msecs
[39930.316153] PM: late suspend of devices complete after 17.142 msecs
[39930.336884] PM: noirq suspend of devices complete after 20.724 msecs
[39930.337622] ACPI: Preparing to enter system sleep state S3
[39930.592153] ACPI: EC: event blocked
[39930.592154] ACPI: EC: EC stopped
[39930.592155] PM: Saving platform NVS memory
[39930.592186] Disabling non-boot CPUs ...
[39930.610507] smpboot: CPU 1 is now offline
[39930.629737] smpboot: CPU 2 is now offline
[39930.653642] smpboot: CPU 3 is now offline
[39930.655914] ACPI: Low-level resume complete
[39930.655994] ACPI: EC: EC started
[39930.655995] PM: Restoring platform NVS memory
[39930.656339] Suspended for 2.760 seconds
[39930.656388] Enabling non-boot CPUs ...
[39930.656433] x86: Booting SMP configuration:
[39930.656435] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39930.657179]  cache: parent cpu1 should not be sleeping
[39930.657393] CPU1 is up
[39930.657475] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39930.658118]  cache: parent cpu2 should not be sleeping
[39930.658363] CPU2 is up
[39930.658418] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39930.659049]  cache: parent cpu3 should not be sleeping
[39930.659399] CPU3 is up
[39930.664009] ACPI: Waking up from system sleep state S3
[39931.587461] PM: noirq resume of devices complete after 21.024 msecs
[39931.588137] PM: early resume of devices complete after 0.636 msecs
[39931.588288] ACPI: EC: event unblocked
[39931.589260] sd 0:0:0:0: [sda] Starting disk
[39931.650873] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39931.667523] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39931.684156] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39931.770464] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39931.901386] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39931.902269] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39931.902273] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39931.904665] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39931.904670] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39931.906174] ata1.00: configured for UDMA/133
[39931.922618] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39931.958436] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39932.182699] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39932.442644] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39932.589635] PM: resume of devices complete after 1001.506 msecs
[39932.589734] usb 2-4:1.0: rebind failed: -517
[39932.589740] usb 2-4:1.1: rebind failed: -517
[39932.590014] PM: Finishing wakeup.
[39932.590015] OOM killer enabled.
[39932.590016] Restarting tasks ... done.
[39932.639298] Bluetooth: hci0: read Intel version: 370710018002030d00
[39932.639304] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39932.852318] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39933.004873] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39933.247856] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39933.312809] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39960.104515] PM: Syncing filesystems ... done.
[39960.121960] PM: Preparing system for sleep (mem)
[39960.122387] Freezing user space processes ... (elapsed 0.002 seconds) done.
[39960.124899] OOM killer disabled.
[39960.124900] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39960.126211] PM: Suspending system (mem)
[39960.126245] Suspending console(s) (use no_console_suspend to debug)
[39960.310249] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39960.311631] sd 0:0:0:0: [sda] Stopping disk
[39960.839535] PM: suspend of devices complete after 713.132 msecs
[39960.858074] PM: late suspend of devices complete after 18.531 msecs
[39960.878791] PM: noirq suspend of devices complete after 20.709 msecs
[39960.879529] ACPI: Preparing to enter system sleep state S3
[39961.134065] ACPI: EC: event blocked
[39961.134066] ACPI: EC: EC stopped
[39961.134067] PM: Saving platform NVS memory
[39961.134100] Disabling non-boot CPUs ...
[39961.152439] smpboot: CPU 1 is now offline
[39961.171645] smpboot: CPU 2 is now offline
[39961.195551] smpboot: CPU 3 is now offline
[39961.197760] ACPI: Low-level resume complete
[39961.197839] ACPI: EC: EC started
[39961.197840] PM: Restoring platform NVS memory
[39961.198185] Suspended for 3.460 seconds
[39961.198235] Enabling non-boot CPUs ...
[39961.198335] x86: Booting SMP configuration:
[39961.198336] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39961.199097]  cache: parent cpu1 should not be sleeping
[39961.199314] CPU1 is up
[39961.199354] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39961.200001]  cache: parent cpu2 should not be sleeping
[39961.200248] CPU2 is up
[39961.200278] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39961.200913]  cache: parent cpu3 should not be sleeping
[39961.201262] CPU3 is up
[39961.205878] ACPI: Waking up from system sleep state S3
[39962.129448] PM: noirq resume of devices complete after 21.099 msecs
[39962.130297] PM: early resume of devices complete after 0.805 msecs
[39962.130467] ACPI: EC: event unblocked
[39962.131344] sd 0:0:0:0: [sda] Starting disk
[39962.193149] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39962.209913] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39962.226650] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39962.284338] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39962.364363] usb 1-1.8: device descriptor read/64, error -32
[39962.447245] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39962.448146] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39962.448154] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39962.450484] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39962.450488] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39962.451926] ata1.00: configured for UDMA/133
[39962.464489] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39962.552308] usb 1-1.8: device descriptor read/64, error -32
[39962.724485] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39962.740328] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39962.820337] usb 1-1.8: device descriptor read/64, error -32
[39962.984500] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39963.008325] usb 1-1.8: device descriptor read/64, error -32
[39963.196346] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39963.384315] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39963.417674] PM: resume of devices complete after 1287.388 msecs
[39963.417765] usb 2-4:1.0: rebind failed: -517
[39963.417770] usb 2-4:1.1: rebind failed: -517
[39963.418186] PM: Finishing wakeup.
[39963.418187] OOM killer enabled.
[39963.418188] Restarting tasks ... 
[39963.437394] Bluetooth: hci0: read Intel version: 370710018002030d00
[39963.437529] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39963.451397] done.
[39963.566401] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39963.810127] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39964.057605] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39964.135543] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39990.353403] PM: Syncing filesystems ... done.
[39990.411039] PM: Preparing system for sleep (mem)
[39990.411597] Freezing user space processes ... (elapsed 0.003 seconds) done.
[39990.414634] OOM killer disabled.
[39990.414635] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39990.416233] PM: Suspending system (mem)
[39990.416279] Suspending console(s) (use no_console_suspend to debug)
[39990.606063] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39990.607394] sd 0:0:0:0: [sda] Stopping disk
[39990.862781] PM: suspend of devices complete after 446.276 msecs
[39990.880193] PM: late suspend of devices complete after 17.399 msecs
[39990.900743] PM: noirq suspend of devices complete after 20.542 msecs
[39990.901481] ACPI: Preparing to enter system sleep state S3
[39991.155977] ACPI: EC: event blocked
[39991.155978] ACPI: EC: EC stopped
[39991.155980] PM: Saving platform NVS memory
[39991.156010] Disabling non-boot CPUs ...
[39991.182355] smpboot: CPU 1 is now offline
[39991.206296] smpboot: CPU 2 is now offline
[39991.229449] smpboot: CPU 3 is now offline
[39991.231762] ACPI: Low-level resume complete
[39991.231842] ACPI: EC: EC started
[39991.231842] PM: Restoring platform NVS memory
[39991.232190] Suspended for 2.967 seconds
[39991.232240] Enabling non-boot CPUs ...
[39991.232285] x86: Booting SMP configuration:
[39991.232287] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39991.233030]  cache: parent cpu1 should not be sleeping
[39991.233249] CPU1 is up
[39991.233321] smpboot: Booting Node 0 Processor 2 APIC 0x2
[39991.233969]  cache: parent cpu2 should not be sleeping
[39991.234214] CPU2 is up
[39991.234274] smpboot: Booting Node 0 Processor 3 APIC 0x3
[39991.234907]  cache: parent cpu3 should not be sleeping
[39991.235260] CPU3 is up
[39991.239876] ACPI: Waking up from system sleep state S3
[39992.163298] PM: noirq resume of devices complete after 21.028 msecs
[39992.164058] PM: early resume of devices complete after 0.716 msecs
[39992.164244] ACPI: EC: event unblocked
[39992.165096] sd 0:0:0:0: [sda] Starting disk
[39992.226492] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[39992.242882] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[39992.259148] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[39992.318275] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[39992.477080] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[39992.477966] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39992.477969] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39992.480338] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[39992.480341] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[39992.481770] ata1.00: configured for UDMA/133
[39992.498442] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[39992.506271] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[39992.758462] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[39993.018479] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[39993.173906] PM: resume of devices complete after 1009.856 msecs
[39993.173991] usb 2-4:1.0: rebind failed: -517
[39993.173997] usb 2-4:1.1: rebind failed: -517
[39993.174263] PM: Finishing wakeup.
[39993.174265] OOM killer enabled.
[39993.174266] Restarting tasks ... done.
[39993.212179] Bluetooth: hci0: read Intel version: 370710018002030d00
[39993.212185] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[39993.417203] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[39993.591102] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39993.838344] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[39993.915579] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[40020.605072] PM: Syncing filesystems ... done.
[40020.622988] PM: Preparing system for sleep (mem)
[40020.623357] Freezing user space processes ... (elapsed 0.002 seconds) done.
[40020.625914] OOM killer disabled.
[40020.625915] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[40020.627344] PM: Suspending system (mem)
[40020.627378] Suspending console(s) (use no_console_suspend to debug)
[40020.814654] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[40020.816079] sd 0:0:0:0: [sda] Stopping disk
[40021.064756] PM: suspend of devices complete after 437.214 msecs
[40021.081906] PM: late suspend of devices complete after 17.140 msecs
[40021.102533] PM: noirq suspend of devices complete after 20.617 msecs
[40021.103273] ACPI: Preparing to enter system sleep state S3
[40021.357892] ACPI: EC: event blocked
[40021.357893] ACPI: EC: EC stopped
[40021.357894] PM: Saving platform NVS memory
[40021.357925] Disabling non-boot CPUs ...
[40021.376279] smpboot: CPU 1 is now offline
[40021.395475] smpboot: CPU 2 is now offline
[40021.419379] smpboot: CPU 3 is now offline
[40021.421637] ACPI: Low-level resume complete
[40021.421716] ACPI: EC: EC started
[40021.421716] PM: Restoring platform NVS memory
[40021.422060] Suspended for 2.812 seconds
[40021.422114] Enabling non-boot CPUs ...
[40021.422210] x86: Booting SMP configuration:
[40021.422211] smpboot: Booting Node 0 Processor 1 APIC 0x1
[40021.422959]  cache: parent cpu1 should not be sleeping
[40021.423176] CPU1 is up
[40021.423221] smpboot: Booting Node 0 Processor 2 APIC 0x2
[40021.423867]  cache: parent cpu2 should not be sleeping
[40021.424114] CPU2 is up
[40021.424164] smpboot: Booting Node 0 Processor 3 APIC 0x3
[40021.424798]  cache: parent cpu3 should not be sleeping
[40021.425150] CPU3 is up
[40021.429761] ACPI: Waking up from system sleep state S3
[40022.353267] PM: noirq resume of devices complete after 21.095 msecs
[40022.354032] PM: early resume of devices complete after 0.726 msecs
[40022.354243] ACPI: EC: event unblocked
[40022.355039] sd 0:0:0:0: [sda] Starting disk
[40022.416251] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[40022.432362] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[40022.448409] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[40022.536189] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[40022.667013] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[40022.667896] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[40022.667900] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[40022.670299] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[40022.670304] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[40022.671783] ata1.00: configured for UDMA/133
[40022.684371] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[40022.724169] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[40022.944306] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[40023.204369] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[40023.350927] PM: resume of devices complete after 996.902 msecs
[40023.351037] usb 2-4:1.0: rebind failed: -517
[40023.351042] usb 2-4:1.1: rebind failed: -517
[40023.351499] PM: Finishing wakeup.
[40023.351501] OOM killer enabled.
[40023.351502] Restarting tasks ... 
[40023.364099] Bluetooth: hci0: read Intel version: 370710018002030d00
[40023.364253] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[40023.386738] done.
[40023.487093] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[40023.734017] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[40023.980709] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[40024.055662] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[40050.850589] PM: Syncing filesystems ... done.
[40050.869783] PM: Preparing system for sleep (mem)
[40050.870267] Freezing user space processes ... (elapsed 0.002 seconds) done.
[40050.872676] OOM killer disabled.
[40050.872677] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[40050.874126] PM: Suspending system (mem)
[40050.874160] Suspending console(s) (use no_console_suspend to debug)
[40051.061005] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[40051.062510] sd 0:0:0:0: [sda] Stopping disk
[40051.314687] PM: suspend of devices complete after 440.359 msecs
[40051.332011] PM: late suspend of devices complete after 17.315 msecs
[40051.352604] PM: noirq suspend of devices complete after 20.585 msecs
[40051.353343] ACPI: Preparing to enter system sleep state S3
[40051.607803] ACPI: EC: event blocked
[40051.607805] ACPI: EC: EC stopped
[40051.607806] PM: Saving platform NVS memory
[40051.607836] Disabling non-boot CPUs ...
[40051.626179] smpboot: CPU 1 is now offline
[40051.650128] smpboot: CPU 2 is now offline
[40051.673277] smpboot: CPU 3 is now offline
[40051.675578] ACPI: Low-level resume complete
[40051.675657] ACPI: EC: EC started
[40051.675658] PM: Restoring platform NVS memory
[40051.676003] Suspended for 3.747 seconds
[40051.676058] Enabling non-boot CPUs ...
[40051.676105] x86: Booting SMP configuration:
[40051.676106] smpboot: Booting Node 0 Processor 1 APIC 0x1
[40051.676849]  cache: parent cpu1 should not be sleeping
[40051.677066] CPU1 is up
[40051.677155] smpboot: Booting Node 0 Processor 2 APIC 0x2
[40051.677801]  cache: parent cpu2 should not be sleeping
[40051.678069] CPU2 is up
[40051.678099] smpboot: Booting Node 0 Processor 3 APIC 0x3
[40051.678732]  cache: parent cpu3 should not be sleeping
[40051.679080] CPU3 is up
[40051.683698] ACPI: Waking up from system sleep state S3
[40052.606828] PM: noirq resume of devices complete after 20.735 msecs
[40052.607504] PM: early resume of devices complete after 0.631 msecs
[40052.607760] ACPI: EC: event unblocked
[40052.608569] sd 0:0:0:0: [sda] Starting disk
[40052.670321] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[40052.686602] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[40052.702836] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[40052.790090] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[40052.920816] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[40052.921699] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[40052.921703] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[40052.924101] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[40052.924104] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[40052.925591] ata1.00: configured for UDMA/133
[40052.938287] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[40052.978103] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[40053.198250] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[40053.458271] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[40053.599902] PM: resume of devices complete after 992.407 msecs
[40053.599980] usb 2-4:1.0: rebind failed: -517
[40053.599985] usb 2-4:1.1: rebind failed: -517
[40053.600199] PM: Finishing wakeup.
[40053.600201] OOM killer enabled.
[40053.600202] Restarting tasks ... done.
[40053.636686] Bluetooth: hci0: read Intel version: 370710018002030d00
[40053.636693] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[40053.836712] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[40053.980274] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[40054.220444] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[40054.304016] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[40091.937207] wlp4s0: authenticate with 34:31:11:c1:f9:81
[40091.939774] wlp4s0: send auth to 34:31:11:c1:f9:81 (try 1/3)
[40091.941746] wlp4s0: authenticated
[40091.949523] wlp4s0: associate with 34:31:11:c1:f9:81 (try 1/3)
[40091.957355] wlp4s0: RX AssocResp from 34:31:11:c1:f9:81 (capab=0x431 status=0 aid=1)
[40091.958655] wlp4s0: associated
[40091.958705] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[40612.801653] wlp4s0: deauthenticating from 34:31:11:c1:f9:81 by local choice (Reason: 3=DEAUTH_LEAVING)
[40612.808482] wlp4s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
[40614.290714] PM: Syncing filesystems ... done.
[40614.346268] PM: Preparing system for sleep (mem)
[40614.346847] Freezing user space processes ... (elapsed 0.002 seconds) done.
[40614.349845] OOM killer disabled.
[40614.349846] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[40614.351275] PM: Suspending system (mem)
[40614.351310] Suspending console(s) (use no_console_suspend to debug)
[40614.544221] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[40614.545445] sd 0:0:0:0: [sda] Stopping disk
[40614.797328] PM: suspend of devices complete after 445.853 msecs
[40614.814338] PM: late suspend of devices complete after 17.002 msecs
[40614.835083] PM: noirq suspend of devices complete after 20.736 msecs
[40614.835823] ACPI: Preparing to enter system sleep state S3
[40615.090331] ACPI: EC: event blocked
[40615.090332] ACPI: EC: EC stopped
[40615.090333] PM: Saving platform NVS memory
[40615.090363] Disabling non-boot CPUs ...
[40615.108740] smpboot: CPU 1 is now offline
[40615.132658] smpboot: CPU 2 is now offline
[40615.155819] smpboot: CPU 3 is now offline
[40615.158158] ACPI: Low-level resume complete
[40615.158238] ACPI: EC: EC started
[40615.158238] PM: Restoring platform NVS memory
[40615.158582] Suspended for 2.511 seconds
[40615.158632] Enabling non-boot CPUs ...
[40615.158696] x86: Booting SMP configuration:
[40615.158697] smpboot: Booting Node 0 Processor 1 APIC 0x1
[40615.159397]  cache: parent cpu1 should not be sleeping
[40615.159621] CPU1 is up
[40615.159676] smpboot: Booting Node 0 Processor 2 APIC 0x2
[40615.160287]  cache: parent cpu2 should not be sleeping
[40615.160538] CPU2 is up
[40615.160568] smpboot: Booting Node 0 Processor 3 APIC 0x3
[40615.161175]  cache: parent cpu3 should not be sleeping
[40615.161552] CPU3 is up
[40615.166158] ACPI: Waking up from system sleep state S3
[40616.089623] PM: noirq resume of devices complete after 21.005 msecs
[40616.090417] PM: early resume of devices complete after 0.750 msecs
[40616.090649] ACPI: EC: event unblocked
[40616.091329] sd 0:0:0:0: [sda] Starting disk
[40616.152829] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[40616.169093] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[40616.185321] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[40616.272645] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[40616.403558] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[40616.404444] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[40616.404447] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[40616.406858] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[40616.406862] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[40616.408346] ata1.00: configured for UDMA/133
[40616.420814] usb 2-5: reset full-speed USB device number 24 using xhci_hcd
[40616.460638] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci
[40616.680781] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[40616.940804] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[40617.096957] PM: resume of devices complete after 1006.546 msecs
[40617.097050] usb 2-4:1.0: rebind failed: -517
[40617.097056] usb 2-4:1.1: rebind failed: -517
[40617.097331] PM: Finishing wakeup.
[40617.097333] OOM killer enabled.
[40617.097334] Restarting tasks ... done.
[40617.131519] Bluetooth: hci0: read Intel version: 370710018002030d00
[40617.131586] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[40617.262521] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[40617.460112] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[40617.707596] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[40617.780883] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[40618.668058] wlp4s0: authenticate with 34:31:11:c1:f9:81
[40618.670464] wlp4s0: send auth to 34:31:11:c1:f9:81 (try 1/3)
[40618.674785] wlp4s0: authenticated
[40618.676558] wlp4s0: associate with 34:31:11:c1:f9:81 (try 1/3)
[40618.689651] wlp4s0: RX AssocResp from 34:31:11:c1:f9:81 (capab=0x431 status=0 aid=2)
[40618.698457] wlp4s0: associated
[40618.698508] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[40734.229281] ata1.00: exception Emask 0x10 SAct 0x200000 SErr 0x280100 action 0x6 frozen
[40734.229286] ata1.00: irq_stat 0x08000000, interface fatal error
[40734.229290] ata1: SError: { UnrecovData 10B8B BadCRC }
[40734.229294] ata1.00: failed command: READ FPDMA QUEUED
[40734.229302] ata1.00: cmd 60/00:a8:00:28:dc/01:00:02:00:00/40 tag 21 ncq dma 131072 in
                        res 40/00:ac:00:28:dc/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[40734.229306] ata1.00: status: { DRDY }
[40734.229310] ata1: hard resetting link
[40734.544080] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[40734.544998] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[40734.545006] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[40734.547483] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[40734.547494] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[40734.548975] ata1.00: configured for UDMA/133
[40734.548998] ata1: EH complete