[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=223c10d5-a7a3-432a-9ffa-27575d5347a6 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) [ 0.000000] BIOS-e820: 000000001fef0000 - 000000001fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fef3000 - 000000001ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 130800) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8CA0 checksum 0 [ 0.000000] ACPI: RSDP 000F8CA0, 0014 (r0 VIAK8M) [ 0.000000] ACPI: RSDT 1FEF3040, 002C (r1 VIAK8M AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 1FEF30C0, 0074 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 1FEF3180, 4E1B (r1 VIAK8M AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 1FEF0000, 0040 [ 0.000000] ACPI: APIC 1FEF8000, 005A (r1 VIAK8M AWRDACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000001fef0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 130800) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000001fef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 130800 [ 0.000000] On node 0 totalpages: 130703 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1124 pages reserved [ 0.000000] DMA zone: 2819 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1732 pages used for memmap [ 0.000000] DMA32 zone: 124972 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:ded00000) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 127791 [ 0.000000] Kernel command line: root=UUID=223c10d5-a7a3-432a-9ffa-27575d5347a6 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 17.959597] time.c: Detected 1799.960 MHz processor. [ 17.961924] Console: colour VGA+ 80x25 [ 17.961941] Checking aperture... [ 17.961944] CPU 0: aperture @ f0000000 size 64 MB [ 17.969959] Memory: 503820k/523200k available (2274k kernel code, 18992k reserved, 1181k data, 296k init) [ 17.970020] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 18.049468] Calibrating delay using timer specific routine.. 3610.10 BogoMIPS (lpj=7220218) [ 18.049520] Security Framework v1.0.0 initialized [ 18.049528] SELinux: Disabled at boot. [ 18.049586] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 18.049850] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 18.050112] Mount-cache hash table entries: 256 [ 18.050281] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.050283] CPU: L2 Cache: 512K (64 bytes/line) [ 18.050287] CPU 0/0 -> Node 0 [ 18.050308] SMP alternatives: switching to UP code [ 18.050527] Freeing SMP alternatives: 24k freed [ 18.051246] Early unpacking initramfs... done [ 18.423902] ACPI: Core revision 20070126 [ 18.423963] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.469439] Using local APIC timer interrupts. [ 18.524918] result 12499729 [ 18.524924] Detected 12.499 MHz APIC timer. [ 18.528790] Brought up 1 CPUs [ 18.529188] NET: Registered protocol family 16 [ 18.529278] ACPI: bus type pci registered [ 18.529285] PCI: Using configuration type 1 [ 18.530547] ACPI: EC: Look up EC in DSDT [ 18.535932] ACPI: Interpreter enabled [ 18.535939] ACPI: (supports S0 S1 S3 S4 S5) [ 18.535967] ACPI: Using IOAPIC for interrupt routing [ 18.543212] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.543219] PCI: Probing PCI hardware (bus 00) [ 18.543980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.602797] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5 [ 18.602944] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 18.603089] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12) [ 18.603217] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 18.603340] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 18.603459] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 18.603578] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 18.603698] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 18.603848] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 18.603986] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 18.604123] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 18.604282] ACPI: PCI Interrupt Link [ALKD] (IRQs *23) [ 18.604359] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.604371] pnp: PnP ACPI init [ 18.604381] ACPI: bus type pnp registered [ 18.608250] pnp: PnP ACPI: found 11 devices [ 18.608254] ACPI: ACPI bus type pnp unregistered [ 18.608314] PCI: Using ACPI for IRQ routing [ 18.608317] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.608327] PCI: Cannot allocate resource region 0 of device 0000:00:00.0 [ 18.608456] NET: Registered protocol family 8 [ 18.608458] NET: Registered protocol family 20 [ 18.608514] agpgart: Detected AGP bridge 0 [ 18.611011] agpgart: AGP aperture is 64M @ 0xf0000000 [ 18.611106] pnp: 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 18.611110] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 18.611113] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 18.611116] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 18.611123] pnp: 00:02: ioport range 0x4000-0x407f has been reserved [ 18.611126] pnp: 00:02: ioport range 0x5000-0x500f has been reserved [ 18.611407] PCI: Bridge: 0000:00:01.0 [ 18.611409] IO window: disabled. [ 18.611413] MEM window: f4000000-f6ffffff [ 18.611417] PREFETCH window: e0000000-efffffff [ 18.611432] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 18.611474] NET: Registered protocol family 2 [ 18.612582] Time: tsc clocksource has been installed. [ 18.644619] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 18.644703] TCP established hash table entries: 16384 (order: 6, 393216 bytes) [ 18.644904] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 18.645127] TCP: Hash tables configured (established 16384 bind 16384) [ 18.645131] TCP reno registered [ 18.656676] checking if image is initramfs... it is [ 19.374081] Freeing initrd memory: 7232k freed [ 19.381927] audit: initializing netlink socket (disabled) [ 19.381945] audit(1196856379.368:1): initialized [ 19.383915] VFS: Disk quotas dquot_6.5.1 [ 19.383969] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 19.384072] io scheduler noop registered [ 19.384074] io scheduler anticipatory registered [ 19.384076] io scheduler deadline registered [ 19.384166] io scheduler cfq registered (default) [ 19.384181] PCI: VIA PCI bridge detected. Disabling DAC. [ 19.384578] Boot video device is 0000:01:00.0 [ 19.408255] Real Time Clock Driver v1.12ac [ 19.408341] Linux agpgart interface v0.102 (c) Dave Jones [ 19.408344] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.408537] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 19.409012] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 19.409667] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.409891] input: Macintosh mouse button emulation as /class/input/input0 [ 19.409990] PNP: No PS/2 controller found. Probing ports directly. [ 19.410488] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.410493] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.410644] mice: PS/2 mouse device common for all mice [ 19.410849] TCP cubic registered [ 19.410919] NET: Registered protocol family 1 [ 19.411131] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 19.411140] Freeing unused kernel memory: 296k freed [ 20.614050] AppArmor: AppArmor initialized<5>audit(1196856380.604:2): type=1505 info="AppArmor initialized" pid=1200 [ 20.621788] fuse init (API version 7.8) [ 20.626612] Failure registering capabilities with primary security module. [ 21.290197] SCSI subsystem initialized [ 21.295470] libata version 2.21 loaded. [ 21.300723] sata_via 0000:00:0f.0: version 2.2 [ 21.300975] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 21.300984] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 21.301033] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 21.301150] scsi0 : sata_via [ 21.301195] scsi1 : sata_via [ 21.301219] ata1: SATA max UDMA/133 cmd 0x000000000001de00 ctl 0x000000000001e402 bmdma 0x000000000001dd00 irq 20 [ 21.301223] ata2: SATA max UDMA/133 cmd 0x000000000001e500 ctl 0x000000000001dc02 bmdma 0x000000000001dd08 irq 20 [ 21.310408] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 21.310415] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 21.348443] usbcore: registered new interface driver usbfs [ 21.348475] usbcore: registered new interface driver hub [ 21.348497] usbcore: registered new device driver usb [ 21.372234] USB Universal Host Controller Interface driver v3.0 [ 21.443837] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 21.443843] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 21.507977] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 21.723603] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 21.735559] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [ 21.735583] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 21.735596] VP_IDE: chipset revision 6 [ 21.735598] VP_IDE: not 100% native mode: will probe irqs later [ 21.735609] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 21.735618] ide0: BM-DMA at 0xdf00-0xdf07, BIOS settings: hda:DMA, hdb:DMA [ 21.735631] ide1: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdc:DMA, hdd:pio [ 21.735638] Probing IDE interface ide0... [ 22.266818] hda: CD-RW 52X24, ATAPI CD/DVD-ROM drive [ 22.546370] hdb: WDC WD1600JB-00GVA0, ATA DISK drive [ 22.604953] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 22.619784] Probing IDE interface ide1... [ 23.656589] hdc: CREATIVE DVD-ROM DVD6240E, ATAPI CD/DVD-ROM drive [ 24.052251] ide1 at 0x170-0x177,0x376 on irq 15 [ 24.056598] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 24.056610] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 24.056622] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 24.056963] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 24.056995] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000 [ 24.057429] usb usb1: configuration #1 chosen from 1 choice [ 24.057591] hub 1-0:1.0: USB hub found [ 24.057598] hub 1-0:1.0: 2 ports detected [ 24.077510] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 24.077521] Uniform CD-ROM driver Revision: 3.20 [ 24.079844] hdb: max request size: 512KiB [ 24.081119] hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(33) [ 24.083117] hdb: cache flushes supported [ 24.083145] hdb: hdb1 hdb2 < hdb5 > [ 24.138857] hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA [ 24.163864] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 24.163878] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 24.163906] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 24.163930] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e100 [ 24.164037] usb usb2: configuration #1 chosen from 1 choice [ 24.164068] hub 2-0:1.0: USB hub found [ 24.164075] hub 2-0:1.0: 2 ports detected [ 24.271651] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 24.271667] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 24.271695] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 24.271718] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e200 [ 24.271827] usb usb3: configuration #1 chosen from 1 choice [ 24.271855] hub 3-0:1.0: USB hub found [ 24.271864] hub 3-0:1.0: 2 ports detected [ 24.379482] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 24.379498] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 24.379523] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 24.379547] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e300 [ 24.379656] usb usb4: configuration #1 chosen from 1 choice [ 24.379683] hub 4-0:1.0: USB hub found [ 24.379691] hub 4-0:1.0: 2 ports detected [ 24.403304] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 24.462932] Attempting manual resume [ 24.462937] swsusp: Resume From Partition 3:69 [ 24.462939] PM: Checking swsusp image. [ 24.481518] PM: Resume from disk failed. [ 24.488325] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 24.488471] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 24.488546] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 24.488592] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf7000000 [ 24.523154] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.523283] usb usb5: configuration #1 chosen from 1 choice [ 24.523314] hub 5-0:1.0: USB hub found [ 24.523324] hub 5-0:1.0: 8 ports detected [ 24.572410] kjournald starting. Commit interval 5 seconds [ 24.572424] EXT3-fs: mounted filesystem with ordered data mode. [ 24.627442] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 24.627454] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 23 [ 24.631453] eth0: VIA Rhine II at 0x1d800, 00:50:70:76:00:91, IRQ 23. [ 24.632167] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. [ 24.938441] usb 1-1: device not accepting address 2, error -71 [ 26.495929] usb 5-3: new high speed USB device using ehci_hcd and address 4 [ 26.628623] usb 5-3: configuration #1 chosen from 1 choice [ 26.871324] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 27.054404] usb 1-1: configuration #1 chosen from 1 choice [ 27.330588] usb 1-2: new low speed USB device using uhci_hcd and address 5 [ 27.515679] usb 1-2: configuration #1 chosen from 1 choice [ 33.578136] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.791460] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.988758] usbcore: registered new interface driver hiddev [ 35.024718] nvidia: module license 'NVIDIA' taints kernel. [ 35.297744] input: Compaq Compaq Internet Keyboard as /class/input/input1 [ 35.297787] input: USB HID v1.00 Keyboard [Compaq Compaq Internet Keyboard] on usb-0000:00:10.0-1 [ 35.359506] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 35.359789] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 [ 35.405615] input: PC Speaker as /class/input/input2 [ 35.423365] input: Compaq Compaq Internet Keyboard as /class/input/input3 [ 35.423461] input,hiddev96: USB HID v1.00 Device [Compaq Compaq Internet Keyboard] on usb-0000:00:10.0-1 [ 35.423492] usbcore: registered new interface driver libusual [ 35.457759] input: Microsoft Microsoft Trackball OpticalŪ as /class/input/input4 [ 35.457818] input: USB HID v1.00 Mouse [Microsoft Microsoft Trackball OpticalŪ] on usb-0000:00:10.0-2 [ 35.457836] usbcore: registered new interface driver usbhid [ 35.457840] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 35.466259] Initializing USB Mass Storage driver... [ 35.466348] scsi2 : SCSI emulation for USB Mass Storage devices [ 35.466415] usb-storage: device found at 4 [ 35.466417] usb-storage: waiting for device to settle before scanning [ 35.466432] usbcore: registered new interface driver usb-storage [ 35.466435] USB Mass Storage support registered. [ 35.752178] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 35.752190] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 35.752331] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 36.902481] lp: driver loaded but no devices found [ 36.992636] Adding 1494004k swap on /dev/hdb5. Priority:-1 extents:1 across:1494004k [ 40.458010] usb-storage: device scan complete [ 40.663852] scsi 2:0:0:0: Direct-Access Maxtor OneTouch 0200 PQ: 0 ANSI: 0 CCS [ 40.705262] sd 2:0:0:0: [sda] 320171008 512-byte hardware sectors (163928 MB) [ 40.911357] sd 2:0:0:0: [sda] Write Protect is off [ 40.911363] sd 2:0:0:0: [sda] Mode Sense: 1c 00 00 00 [ 40.911366] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 40.912332] sd 2:0:0:0: [sda] 320171008 512-byte hardware sectors (163928 MB) [ 41.118434] sd 2:0:0:0: [sda] Write Protect is off [ 41.118441] sd 2:0:0:0: [sda] Mode Sense: 1c 00 00 00 [ 41.118444] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 41.118451] sda: sda1 [ 41.150974] sd 2:0:0:0: [sda] Attached SCSI disk [ 41.267593] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 203.536166] EXT3 FS on hdb1, internal journal