[    0.000000] microcode: microcode updated early to revision 0xba, date = 2017-04-09
[    0.000000] Linux version 4.12.1-041201-generic (kernel@gomeisa) (gcc version 6.3.0 20170618 (Ubuntu 6.3.0-19ubuntu1) ) #201707121132 SMP Wed Jul 12 15:34:46 UTC 2017
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.1-041201-generic root=UUID=75bb5d92-206d-4bb8-a405-150b9b93d6d3 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000072228fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000072229000-0x0000000072229fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007222a000-0x000000007222afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007222b000-0x0000000079fcdfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079fce000-0x000000007a304fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a305000-0x000000007a46cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a46d000-0x000000007ab12fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ab13000-0x000000007b3fefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b3ff000-0x000000007b3fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b400000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000c7effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: MSI MS-7976/Z170A GAMING M7 (MS-7976), BIOS 1.I0 04/25/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xc7f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B800000 mask 7FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7b400 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [ffff951fc00fcc70]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff951fc0096000] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x5cef14000, 0x5cef14fff] PGTABLE
[    0.000000] BRK [0x5cef15000, 0x5cef15fff] PGTABLE
[    0.000000] BRK [0x5cef16000, 0x5cef16fff] PGTABLE
[    0.000000] BRK [0x5cef17000, 0x5cef17fff] PGTABLE
[    0.000000] BRK [0x5cef18000, 0x5cef18fff] PGTABLE
[    0.000000] BRK [0x5cef19000, 0x5cef19fff] PGTABLE
[    0.000000] BRK [0x5cef1a000, 0x5cef1afff] PGTABLE
[    0.000000] BRK [0x5cef1b000, 0x5cef1bfff] PGTABLE
[    0.000000] BRK [0x5cef1c000, 0x5cef1cfff] PGTABLE
[    0.000000] BRK [0x5cef1d000, 0x5cef1dfff] PGTABLE
[    0.000000] BRK [0x5cef1e000, 0x5cef1efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x322a1000-0x35147fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000007A76D0A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007A793DA0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007A76D1F0 026BAA (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x000000007AB12C40 000040
[    0.000000] ACPI: APIC 0x000000007A793EB8 0000BC (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007A793F78 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007A793FC0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000007A794000 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: FIDT 0x000000007A7943C0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007A794460 003159 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A7975C0 00255F (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000007A799B20 000038 (v01 INTEL  SKL      00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A799B58 000DE5 (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A79A940 000A29 (v02 INTEL  xh_rvp08 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x000000007A79B370 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000007A79B3B8 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000007A79C298 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: WSMT 0x000000007A79C330 000028 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A79C358 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A79C5F8 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000007A79F600 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000007A79F638 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000c7effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0xc7efd5000-0xc7effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000c7effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000072228fff]
[    0.000000]   node   0: [mem 0x000000007222b000-0x0000000079fcdfff]
[    0.000000]   node   0: [mem 0x000000007a305000-0x000000007a46cfff]
[    0.000000]   node   0: [mem 0x000000007b3ff000-0x000000007b3fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000c7effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000c7effffff]
[    0.000000] On node 0 totalpages: 12554448
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7749 pages used for memmap
[    0.000000]   DMA32 zone: 495925 pages, LIFO batch:31
[    0.000000]   Normal zone: 188352 pages used for memmap
[    0.000000]   Normal zone: 12054528 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x72229000-0x72229fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7222a000-0x7222afff]
[    0.000000] PM: Registered nosave memory: [mem 0x79fce000-0x7a304fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a46d000-0x7ab12fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ab13000-0x7b3fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b400000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 39 pages/cpu @ffff952c3ec00000 s118936 r8192 d32616 u262144
[    0.000000] pcpu-alloc: s118936 r8192 d32616 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 12358262
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.1-041201-generic root=UUID=75bb5d92-206d-4bb8-a405-150b9b93d6d3 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 49294424K/50217792K available (9111K kernel code, 2481K rwdata, 3976K rodata, 2260K init, 2392K bss, 923368K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 37003 entries in 145 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:524544 nr_irqs:2048 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.004000] tsc: Detected 4000.000 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 8016.00 BogoMIPS (lpj=16032000)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170303
[    0.025223] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.025240] Security Framework initialized
[    0.025241] Yama: becoming mindful.
[    0.025250] AppArmor: AppArmor initialized
[    0.026951] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[    0.033687] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.036620] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.036647] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.036909] CPU: Physical Processor ID: 0
[    0.036909] CPU: Processor Core ID: 0
[    0.036913] mce: CPU supports 10 MCE banks
[    0.036919] CPU0: Thermal monitoring enabled (TM1)
[    0.036930] process: using mwait in idle threads
[    0.036932] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.036932] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.037131] Freeing SMP alternatives memory: 32K
[    0.040037] smpboot: Max logical packages: 2
[    0.044582] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.048947] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088659] TSC deadline timer enabled
[    0.088664] smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.088693] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.088710] ... version:                4
[    0.088710] ... bit width:              48
[    0.088711] ... generic registers:      4
[    0.088711] ... value mask:             0000ffffffffffff
[    0.088711] ... max period:             00007fffffffffff
[    0.088712] ... fixed-purpose events:   3
[    0.088712] ... event mask:             000000070000000f
[    0.089192] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.089207] smp: Bringing up secondary CPUs ...
[    0.089239] x86: Booting SMP configuration:
[    0.089240] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.648026] smp: Brought up 1 node, 8 CPUs
[    0.648026] smpboot: Total of 8 processors activated (64135.59 BogoMIPS)
[    0.652080] sched_clock: Marking stable (652000000, 0)->(658228515, -6228515)
[    0.652829] devtmpfs: initialized
[    0.652858] x86/mm: Memory block size: 128MB
[    0.655978] evm: security.selinux
[    0.655979] evm: security.SMACK64
[    0.655979] evm: security.SMACK64EXEC
[    0.655979] evm: security.SMACK64TRANSMUTE
[    0.655979] evm: security.SMACK64MMAP
[    0.655980] evm: security.ima
[    0.655980] evm: security.capability
[    0.656024] PM: Registering ACPI NVS region [mem 0x72229000-0x72229fff] (4096 bytes)
[    0.656025] PM: Registering ACPI NVS region [mem 0x7a46d000-0x7ab12fff] (6971392 bytes)
[    0.656099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.656105] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.656146] pinctrl core: initialized pinctrl subsystem
[    0.656274] RTC time: 18:28:15, date: 08/08/17
[    0.656329] NET: Registered protocol family 16
[    0.656437] cpuidle: using governor ladder
[    0.656450] cpuidle: using governor menu
[    0.656451] PCCT header not found.
[    0.656488] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.656489] ACPI: bus type PCI registered
[    0.656489] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.656535] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.656536] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.656542] PCI: Using configuration type 1 for base access
[    0.657484] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.657485] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.657604] ACPI: Added _OSI(Module Device)
[    0.657604] ACPI: Added _OSI(Processor Device)
[    0.657605] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.657605] ACPI: Added _OSI(Processor Aggregator Device)
[    0.658625] ACPI: Executed 36 blocks of module-level executable AML code
[    0.664732] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.667080] ACPI: Dynamic OEM Table Load:
[    0.667085] ACPI: SSDT 0xFFFF952C0766A000 0007DD (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.667170] ACPI: Executed 1 blocks of module-level executable AML code
[    0.667214] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.667932] ACPI: Dynamic OEM Table Load:
[    0.667934] ACPI: SSDT 0xFFFF952C076D5800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.668011] ACPI: Executed 1 blocks of module-level executable AML code
[    0.668104] ACPI: Dynamic OEM Table Load:
[    0.668106] ACPI: SSDT 0xFFFF952C076AC200 000115 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.668169] ACPI: Executed 1 blocks of module-level executable AML code
[    0.668208] ACPI: Dynamic OEM Table Load:
[    0.668210] ACPI: SSDT 0xFFFF952C076AD200 0001A4 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.668269] ACPI: Executed 1 blocks of module-level executable AML code
[    0.668470] ACPI: Dynamic OEM Table Load:
[    0.668473] ACPI: SSDT 0xFFFF952C0766D000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.668662] ACPI: Executed 1 blocks of module-level executable AML code
[    0.668745] ACPI: Dynamic OEM Table Load:
[    0.668747] ACPI: SSDT 0xFFFF952C076AE200 000197 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.668819] ACPI: Executed 1 blocks of module-level executable AML code
[    0.668906] ACPI: Dynamic OEM Table Load:
[    0.668908] ACPI: SSDT 0xFFFF952C076AFC00 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.668981] ACPI: Executed 1 blocks of module-level executable AML code
[    0.670983] ACPI: Interpreter enabled
[    0.671008] ACPI: (supports S0 S3 S4 S5)
[    0.671008] ACPI: Using IOAPIC for interrupt routing
[    0.671031] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.673039] ACPI: Power Resource [PG00] (on)
[    0.673290] ACPI: Power Resource [PG01] (on)
[    0.673533] ACPI: Power Resource [PG02] (on)
[    0.674667] ACPI: Power Resource [WRST] (on)
[    0.674864] ACPI: Power Resource [WRST] (on)
[    0.675063] ACPI: Power Resource [WRST] (on)
[    0.675264] ACPI: Power Resource [WRST] (on)
[    0.675465] ACPI: Power Resource [WRST] (on)
[    0.675665] ACPI: Power Resource [WRST] (on)
[    0.675861] ACPI: Power Resource [WRST] (on)
[    0.676060] ACPI: Power Resource [WRST] (on)
[    0.676256] ACPI: Power Resource [WRST] (on)
[    0.676450] ACPI: Power Resource [WRST] (on)
[    0.676644] ACPI: Power Resource [WRST] (on)
[    0.676837] ACPI: Power Resource [WRST] (on)
[    0.677038] ACPI: Power Resource [WRST] (on)
[    0.677232] ACPI: Power Resource [WRST] (on)
[    0.677427] ACPI: Power Resource [WRST] (on)
[    0.677625] ACPI: Power Resource [WRST] (on)
[    0.677823] ACPI: Power Resource [WRST] (on)
[    0.678569] ACPI: Power Resource [WRST] (on)
[    0.678763] ACPI: Power Resource [WRST] (on)
[    0.678957] ACPI: Power Resource [WRST] (on)
[    0.686599] ACPI: Power Resource [FN00] (off)
[    0.686647] ACPI: Power Resource [FN01] (off)
[    0.686691] ACPI: Power Resource [FN02] (off)
[    0.686735] ACPI: Power Resource [FN03] (off)
[    0.686778] ACPI: Power Resource [FN04] (off)
[    0.687483] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.687486] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.687588] acpi PNP0A08:00: _OSC: platform does not support [PME AER]
[    0.687682] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
[    0.687682] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.688107] PCI host bridge to bus 0000:00
[    0.688108] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.688109] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.688110] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.688110] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.688111] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.688111] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.688116] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[    0.688316] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.688341] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.688417] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.688454] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[    0.688459] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.688463] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.688465] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.688558] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.688564] pci 0000:00:08.0: reg 0x10: [mem 0xde32f000-0xde32ffff 64bit]
[    0.688670] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.688683] pci 0000:00:14.0: reg 0x10: [mem 0xde310000-0xde31ffff 64bit]
[    0.688735] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.688838] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.688859] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.688873] pci 0000:00:14.2: reg 0x10: [mem 0xde32e000-0xde32efff 64bit]
[    0.688992] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.689009] pci 0000:00:16.0: reg 0x10: [mem 0xde32d000-0xde32dfff 64bit]
[    0.689068] pci 0000:00:16.0: PME# supported from D3hot
[    0.689169] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.689179] pci 0000:00:17.0: reg 0x10: [mem 0xde328000-0xde329fff]
[    0.689184] pci 0000:00:17.0: reg 0x14: [mem 0xde32c000-0xde32c0ff]
[    0.689190] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.689195] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.689200] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.689205] pci 0000:00:17.0: reg 0x24: [mem 0xde32b000-0xde32b7ff]
[    0.689236] pci 0000:00:17.0: PME# supported from D3hot
[    0.689323] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.689368] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.689444] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.689463] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[    0.689508] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.689583] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.689621] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
[    0.689783] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.689792] pci 0000:00:1f.2: reg 0x10: [mem 0xde324000-0xde327fff]
[    0.689910] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.689929] pci 0000:00:1f.3: reg 0x10: [mem 0xde320000-0xde323fff 64bit]
[    0.689956] pci 0000:00:1f.3: reg 0x20: [mem 0xde300000-0xde30ffff 64bit]
[    0.689996] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.690100] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.690124] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.690170] pci 0000:00:1f.4: reg 0x10: [mem 0xde32a000-0xde32a0ff 64bit]
[    0.690239] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.690410] pci 0000:01:00.0: [1002:7300] type 00 class 0x030000
[    0.690421] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.690426] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
[    0.690430] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.690433] pci 0000:01:00.0: reg 0x24: [mem 0xde200000-0xde23ffff]
[    0.690436] pci 0000:01:00.0: reg 0x30: [mem 0xde240000-0xde25ffff pref]
[    0.690471] pci 0000:01:00.0: supports D1 D2
[    0.690472] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.690492] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.690509] pci 0000:01:00.1: [1002:aae8] type 00 class 0x040300
[    0.690520] pci 0000:01:00.1: reg 0x10: [mem 0xde260000-0xde263fff 64bit]
[    0.690567] pci 0000:01:00.1: supports D1 D2
[    0.690595] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.690596] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.690598] pci 0000:00:01.0:   bridge window [mem 0xde200000-0xde2fffff]
[    0.690600] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[    0.690651] pci 0000:02:00.0: [1b21:1242] type 00 class 0x0c0330
[    0.690673] pci 0000:02:00.0: reg 0x10: [mem 0xde100000-0xde107fff 64bit]
[    0.690774] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.690834] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.690855] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.690858] pci 0000:00:1c.0:   bridge window [mem 0xde100000-0xde1fffff]
[    0.690909] pci 0000:03:00.0: [1969:e0a1] type 00 class 0x020000
[    0.690932] pci 0000:03:00.0: reg 0x10: [mem 0xde000000-0xde03ffff 64bit]
[    0.690941] pci 0000:03:00.0: reg 0x18: [io  0xd000-0xd07f]
[    0.691034] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.691086] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.691107] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.691108] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.691110] pci 0000:00:1c.2:   bridge window [mem 0xde000000-0xde0fffff]
[    0.692298] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.692329] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.692359] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.692389] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.692420] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.692451] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.692481] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.692511] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.692850] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.692897] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.692898] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.692900] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.692901] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.692901] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.692902] vgaarb: loaded
[    0.692975] SCSI subsystem initialized
[    0.692992] libata version 3.00 loaded.
[    0.693000] ACPI: bus type USB registered
[    0.693007] usbcore: registered new interface driver usbfs
[    0.693010] usbcore: registered new interface driver hub
[    0.693024] usbcore: registered new device driver usb
[    0.693047] EDAC MC: Ver: 3.0.0
[    0.693124] PCI: Using ACPI for IRQ routing
[    0.721117] PCI: pci_cache_line_size set to 64 bytes
[    0.721153] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[    0.721153] e820: reserve RAM buffer [mem 0x72229000-0x73ffffff]
[    0.721154] e820: reserve RAM buffer [mem 0x79fce000-0x7bffffff]
[    0.721154] e820: reserve RAM buffer [mem 0x7a46d000-0x7bffffff]
[    0.721155] e820: reserve RAM buffer [mem 0x7b400000-0x7bffffff]
[    0.721155] e820: reserve RAM buffer [mem 0xc7f000000-0xc7fffffff]
[    0.721203] NetLabel: Initializing
[    0.721203] NetLabel:  domain hash size = 128
[    0.721204] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.721211] NetLabel:  unlabeled traffic allowed by default
[    0.721307] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.721309] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.723348] clocksource: Switched to clocksource hpet
[    0.728811] VFS: Disk quotas dquot_6.6.0
[    0.728820] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.728856] AppArmor: AppArmor Filesystem Enabled
[    0.728873] pnp: PnP ACPI init
[    0.729051] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.729052] system 00:00: [io  0x0a10-0x0a1f] has been reserved
[    0.729052] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.729053] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.729055] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.729076] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.729102] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.729178] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.729178] system 00:03: [io  0xffff] has been reserved
[    0.729179] system 00:03: [io  0xffff] has been reserved
[    0.729180] system 00:03: [io  0xffff] has been reserved
[    0.729180] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.729181] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.729182] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.729234] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.729235] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.729244] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.729262] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.729263] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.729382] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.729383] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.729384] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.729384] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.729385] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.729385] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.729386] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.729387] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.729387] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.729388] system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved
[    0.729389] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.729409] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.729410] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.729410] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.729411] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.729412] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.729412] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.729413] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.729590] system 00:09: [io  0xff00-0xfffe] has been reserved
[    0.729591] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.730248] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.730249] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.730250] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.730251] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.730756] pnp: PnP ACPI: found 11 devices
[    0.738035] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.738049] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.738050] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.738052] pci 0000:00:01.0:   bridge window [mem 0xde200000-0xde2fffff]
[    0.738053] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[    0.738055] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.738057] pci 0000:00:1c.0:   bridge window [mem 0xde100000-0xde1fffff]
[    0.738061] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.738062] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.738064] pci 0000:00:1c.2:   bridge window [mem 0xde000000-0xde0fffff]
[    0.738068] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.738069] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.738070] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.738070] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[    0.738071] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.738071] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.738072] pci_bus 0000:01: resource 1 [mem 0xde200000-0xde2fffff]
[    0.738072] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[    0.738073] pci_bus 0000:02: resource 1 [mem 0xde100000-0xde1fffff]
[    0.738074] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.738074] pci_bus 0000:03: resource 1 [mem 0xde000000-0xde0fffff]
[    0.738156] NET: Registered protocol family 2
[    0.738308] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.738671] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.738765] TCP: Hash tables configured (established 524288 bind 65536)
[    0.738798] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.738894] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.738992] NET: Registered protocol family 1
[    0.738999] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.831941] PCI: CLS 64 bytes, default 64
[    0.831958] Unpacking initramfs...
[    1.271092] Freeing initrd memory: 47772K
[    1.271096] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.271098] software IO TLB [mem 0x75fce000-0x79fce000] (64MB) mapped at [ffff952035fce000-ffff952039fcdfff]
[    1.271377] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e21a6f1, max_idle_ns: 440795312983 ns
[    1.271576] Scanning for low memory corruption every 60 seconds
[    1.271805] audit: initializing netlink subsys (disabled)
[    1.271869] audit: type=2000 audit(1502216896.268:1): state=initialized audit_enabled=0 res=1
[    1.272082] Initialise system trusted keyrings
[    1.272087] Key type blacklist registered
[    1.272137] workingset: timestamp_bits=36 max_order=24 bucket_order=0
[    1.272686] zbud: loaded
[    1.272936] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.273044] fuse init (API version 7.26)
[    1.275437] Key type asymmetric registered
[    1.275438] Asymmetric key parser 'x509' registered
[    1.275445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.275481] io scheduler noop registered
[    1.275481] io scheduler deadline registered
[    1.275496] io scheduler cfq registered (default)
[    1.275926] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    1.275927] vesafb: scrolling: redraw
[    1.275928] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.275933] vesafb: framebuffer at 0xb0000000, mapped to 0xffffa17347000000, using 8128k, total 8128k
[    1.391665] Console: switching to colour frame buffer device 240x67
[    1.506860] fb0: VESA VGA frame buffer device
[    1.506866] intel_idle: MWAIT substates: 0x142120
[    1.506867] intel_idle: v0.4.1 model 0x5E
[    1.507108] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.507191] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.507193] ACPI: Sleep Button [SLPB]
[    1.507208] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.507208] ACPI: Power Button [PWRB]
[    1.507223] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.507223] ACPI: Power Button [PWRF]
[    1.564218] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.623590] thermal LNXTHERM:00: registered as thermal_zone0
[    1.623590] ACPI: Thermal Zone [TZ00] (28 C)
[    1.623664] thermal LNXTHERM:01: registered as thermal_zone1
[    1.623664] ACPI: Thermal Zone [TZ01] (30 C)
[    1.623681] GHES: HEST is not enabled!
[    1.623830] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.644617] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.665517] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.667456] Linux agpgart interface v0.103
[    1.669453] loop: module loaded
[    1.669526] libphy: Fixed MDIO Bus: probed
[    1.669526] tun: Universal TUN/TAP device driver, 1.6
[    1.669557] PPP generic driver version 2.4.2
[    1.669592] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.669593] ehci-pci: EHCI PCI platform driver
[    1.669597] ehci-platform: EHCI generic platform driver
[    1.669601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.669601] ohci-pci: OHCI PCI platform driver
[    1.669605] ohci-platform: OHCI generic platform driver
[    1.669607] uhci_hcd: USB Universal Host Controller Interface driver
[    1.669683] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.669686] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.670751] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.670754] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.670803] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.670804] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.670804] usb usb1: Product: xHCI Host Controller
[    1.670805] usb usb1: Manufacturer: Linux 4.12.1-041201-generic xhci-hcd
[    1.670805] usb usb1: SerialNumber: 0000:00:14.0
[    1.670867] hub 1-0:1.0: USB hub found
[    1.670880] hub 1-0:1.0: 16 ports detected
[    1.678775] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.678777] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.678793] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.678794] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.678795] usb usb2: Product: xHCI Host Controller
[    1.678795] usb usb2: Manufacturer: Linux 4.12.1-041201-generic xhci-hcd
[    1.678795] usb usb2: SerialNumber: 0000:00:14.0
[    1.678884] hub 2-0:1.0: USB hub found
[    1.678894] hub 2-0:1.0: 10 ports detected
[    1.682818] usb: port power management may be unreliable
[    1.683979] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.683982] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    1.742755] xhci_hcd 0000:02:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
[    1.742857] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.742858] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.742858] usb usb3: Product: xHCI Host Controller
[    1.742859] usb usb3: Manufacturer: Linux 4.12.1-041201-generic xhci-hcd
[    1.742859] usb usb3: SerialNumber: 0000:02:00.0
[    1.742954] hub 3-0:1.0: USB hub found
[    1.742958] hub 3-0:1.0: 2 ports detected
[    1.742994] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.742996] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    1.743015] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.743021] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.743022] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.743022] usb usb4: Product: xHCI Host Controller
[    1.743023] usb usb4: Manufacturer: Linux 4.12.1-041201-generic xhci-hcd
[    1.743023] usb usb4: SerialNumber: 0000:02:00.0
[    1.743102] hub 4-0:1.0: USB hub found
[    1.743106] hub 4-0:1.0: 2 ports detected
[    1.743156] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.746491] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.746494] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.746611] mousedev: PS/2 mouse device common for all mice
[    1.746802] rtc_cmos 00:05: RTC can wake from S4
[    1.747175] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.747253] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.747256] i2c /dev entries driver
[    1.747278] device-mapper: uevent: version 1.0.3
[    1.747332] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.747334] intel_pstate: Intel P-state driver initializing
[    1.748462] intel_pstate: HWP enabled
[    1.748748] ledtrig-cpu: registered to indicate activity on CPUs
[    1.748777] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    1.749260] NET: Registered protocol family 10
[    1.753021] Segment Routing with IPv6
[    1.753030] NET: Registered protocol family 17
[    1.753034] Key type dns_resolver registered
[    1.753838] RAS: Correctable Errors collector initialized.
[    1.753851] microcode: sig=0x506e3, pf=0x2, revision=0xba
[    1.754116] microcode: Microcode Update Driver: v2.2.
[    1.754269] registered taskstats version 1
[    1.754274] Loading compiled-in X.509 certificates
[    1.756139] Loaded X.509 cert 'Build time autogenerated kernel key: 8b3e99d5787fbb651fc6eb245f7176833468895f'
[    1.756148] zswap: loaded using pool lzo/zbud
[    1.763395] Key type big_key registered
[    1.763397] Key type trusted registered
[    1.765138] Key type encrypted registered
[    1.765154] AppArmor: AppArmor sha1 policy hashing enabled
[    1.765155] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.765164] evm: HMAC attrs: 0x1
[    1.765640]   Magic number: 13:448:493
[    1.765859] rtc_cmos 00:05: setting system clock to 2017-08-08 18:28:16 UTC (1502216896)
[    1.766005] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.766006] EDD information not available.
[    1.766040] PM: Hibernation image not present or could not be loaded.
[    1.767215] Freeing unused kernel memory: 2260K
[    1.767215] Write protecting the kernel read-only data: 14336k
[    1.767453] Freeing unused kernel memory: 1112K
[    1.767630] Freeing unused kernel memory: 120K
[    1.768775] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.776181] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.776236] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.776242] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.776249] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.776507] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.776526] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.777410] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.777417] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.777442] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.777742] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.805701] hidraw: raw HID events driver (C) Jiri Kosina
[    1.808848] wmi: Mapper loaded
[    1.822094] ahci 0000:00:17.0: version 3.0
[    1.822318] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.822320] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[    1.832348] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:9f:40:ed]
[    1.863935] alx 0000:03:00.0 enp3s0: renamed from eth0
[    1.884023] scsi host0: ahci
[    1.884230] scsi host1: ahci
[    1.884452] scsi host2: ahci
[    1.884643] scsi host3: ahci
[    1.884817] scsi host4: ahci
[    1.884932] scsi host5: ahci
[    1.884953] ata1: SATA max UDMA/133 abar m2048@0xde32b000 port 0xde32b100 irq 130
[    1.884954] ata2: SATA max UDMA/133 abar m2048@0xde32b000 port 0xde32b180 irq 130
[    1.884955] ata3: SATA max UDMA/133 abar m2048@0xde32b000 port 0xde32b200 irq 130
[    1.884956] ata4: SATA max UDMA/133 abar m2048@0xde32b000 port 0xde32b280 irq 130
[    1.884957] ata5: SATA max UDMA/133 abar m2048@0xde32b000 port 0xde32b300 irq 130
[    1.884957] ata6: SATA max UDMA/133 abar m2048@0xde32b000 port 0xde32b380 irq 130
[    1.887502] [drm] Memory usable by graphics device = 4096M
[    1.887503] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[    1.887504] fb: switching to inteldrmfb from VESA VGA
[    1.887519] Console: switching to colour dummy device 80x25
[    1.887602] [drm] Replacing VGA console driver
[    1.893709] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.893710] [drm] Driver supports precise vblank timestamp query.
[    1.898607] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.898708] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[    1.899948] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
[    1.901108] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.901449] acpi device:0f: registered as cooling_device13
[    1.901497] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.003501] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    2.100754] fbcon: inteldrmfb (fb0) is primary device
[    2.125453] random: fast init done
[    2.127400] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    2.146144] usb 1-3: New USB device found, idVendor=2109, idProduct=2812
[    2.146144] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.146145] usb 1-3: Product: USB2.0 Hub             
[    2.146146] usb 1-3: Manufacturer: VIA Labs, Inc.         
[    2.146567] hub 1-3:1.0: USB hub found
[    2.146706] hub 1-3:1.0: 4 ports detected
[    2.153990] Console: switching to colour frame buffer device 240x67
[    2.173012] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.199679] ata4: SATA link down (SStatus 4 SControl 300)
[    2.199704] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.199719] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.199743] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.199764] ata5: SATA link down (SStatus 4 SControl 300)
[    2.200885] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.200886] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.200887] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.201260] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.201261] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.201262] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.201758] ata2.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133
[    2.201759] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.201775] ata3.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
[    2.202753] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.202754] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.202755] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.203063] ata6: SATA link down (SStatus 4 SControl 300)
[    2.203280] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.203281] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.203282] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.203409] ata2.00: configured for UDMA/133
[    2.203808] ata3.00: configured for UDMA/100
[    2.214509] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.214510] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.214511] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.224145] ata1.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
[    2.224145] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.229594] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.229595] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.229595] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.235099] ata1.00: configured for UDMA/133
[    2.235472] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[    2.263813] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    2.283632] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.283633] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.283635] sd 0:0:0:0: [sda] Write Protect is off
[    2.283636] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.283640] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.284044] scsi 1:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC26 PQ: 0 ANSI: 5
[    2.284910]  sda: sda1 sda2 sda3
[    2.285199] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.303707] clocksource: Switched to clocksource tsc
[    2.328218] usb 3-2: New USB device found, idVendor=2833, idProduct=2031
[    2.328219] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.328220] usb 3-2: Product: Rift
[    2.328220] usb 3-2: Manufacturer: Oculus VR, Inc.
[    2.328221] usb 3-2: SerialNumber: 123456789A
[    2.328812] hub 3-2:1.0: USB hub found
[    2.328880] hub 3-2:1.0: 4 ports detected
[    2.331549] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.331550] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    2.331553] sd 1:0:0:0: [sdb] Write Protect is off
[    2.331554] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.331557] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.331591] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.332362] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222AB  SB01 PQ: 0 ANSI: 5
[    2.347939]  sdb: sdb1 sdb2 sdb3
[    2.348053] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.357622] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.357626] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.357698] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.357723] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.423439] usb 1-11: new full-speed USB device number 3 using xhci_hcd
[    2.444957] usb 2-1: New USB device found, idVendor=2833, idProduct=0211
[    2.444958] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.444958] usb 2-1: Product: Rift Sensor
[    2.444959] usb 2-1: Manufacturer: Oculus VR
[    2.444960] usb 2-1: SerialNumber: WMTD303N702QUT
[    2.447546] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    2.473446] usb 4-2: New USB device found, idVendor=2833, idProduct=3031
[    2.473450] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.473453] usb 4-2: Product: Rift
[    2.473455] usb 4-2: Manufacturer: Oculus VR, Inc.
[    2.473457] usb 4-2: SerialNumber: 123456789A
[    2.474535] hub 4-2:1.0: USB hub found
[    2.474956] hub 4-2:1.0: 4 ports detected
[    2.577891] usb 1-11: New USB device found, idVendor=046d, idProduct=c041
[    2.577892] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.577892] usb 1-11: Product: USB Gaming Mouse
[    2.577893] usb 1-11: Manufacturer: Logitech
[    2.585943] usbcore: registered new interface driver usbhid
[    2.585944] usbhid: USB HID core driver
[    2.586634] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:046D:C041.0001/input/input7
[    2.586680] hid-generic 0003:046D:C041.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:14.0-11/input0
[    2.586731] hid-generic 0003:046D:C041.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:14.0-11/input1
[    2.615352] usb 3-2.1: new full-speed USB device number 3 using xhci_hcd
[    2.655375] usb 1-3.1: new high-speed USB device number 4 using xhci_hcd
[    2.772925] usb 1-3.1: New USB device found, idVendor=2109, idProduct=2812
[    2.772926] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.772926] usb 1-3.1: Product: USB2.0 Hub             
[    2.772927] usb 1-3.1: Manufacturer: VIA Labs, Inc.         
[    2.773443] hub 1-3.1:1.0: USB hub found
[    2.773607] hub 1-3.1:1.0: 4 ports detected
[    2.882234] usb 3-2.1: New USB device found, idVendor=2833, idProduct=0031
[    2.882235] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.882236] usb 3-2.1: Product: Rift
[    2.882236] usb 3-2.1: Manufacturer: Oculus VR, Inc.
[    2.882237] usb 3-2.1: SerialNumber: WMHD202B200FK2
[    2.885485] hid-generic 0003:2833:0031.0003: hiddev1,hidraw2: USB HID v1.10 Device [Oculus VR, Inc. Rift] on usb-0000:02:00.0-2.1/input0
[    2.887924] hid-generic 0003:2833:0031.0004: hiddev2,hidraw3: USB HID v1.10 Device [Oculus VR, Inc. Rift] on usb-0000:02:00.0-2.1/input1
[    2.895492] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[    2.977323] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.055379] usb 1-12: new full-speed USB device number 5 using xhci_hcd
[    3.076758] usb 2-2: New USB device found, idVendor=2833, idProduct=0211
[    3.076758] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.076759] usb 2-2: Product: Rift Sensor
[    3.076760] usb 2-2: Manufacturer: Oculus VR
[    3.076760] usb 2-2: SerialNumber: WMTD202B2003JF
[    3.104673] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.109942] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[    3.110041] systemd[1]: Detected architecture x86-64.
[    3.111048] systemd[1]: Set hostname to <brix>.
[    3.199951] usb 1-12: New USB device found, idVendor=045e, idProduct=07a5
[    3.199953] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.199953] usb 1-12: Product: Microsoft® 2.4GHz Transceiver v9.0
[    3.199954] usb 1-12: Manufacturer: Microsoft
[    3.204665] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:045E:07A5.0005/input/input8
[    3.232208] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.232670] systemd[1]: Created slice User and Session Slice.
[    3.232692] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.232696] systemd[1]: Reached target Libvirt guests shutdown.
[    3.232700] systemd[1]: Reached target System Time Synchronized.
[    3.232715] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.232731] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.263406] hid-generic 0003:045E:07A5.0005: input,hidraw4: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-12/input0
[    3.267273] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.1/0003:045E:07A5.0006/input/input9
[    3.267319] hid-generic 0003:045E:07A5.0006: input,hidraw5: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-12/input1
[    3.272281] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/0003:045E:07A5.0007/input/input10
[    3.279514] RPC: Registered named UNIX socket transport module.
[    3.279515] RPC: Registered udp transport module.
[    3.279515] RPC: Registered tcp transport module.
[    3.279515] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.279915] lp: driver loaded but no devices found
[    3.283278] ppdev: user-space parallel port driver
[    3.286270] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[    3.286898] parport0: irq 7 detected
[    3.287356] usb 1-3.2: new full-speed USB device number 6 using xhci_hcd
[    3.331402] hid-generic 0003:045E:07A5.0007: input,hidraw6: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-12/input2
[    3.365842] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    3.373524] systemd-journald[389]: Received request to flush runtime journal from PID 1
[    3.387537] lp0: using parport0 (polling).
[    3.399286] nct6775: Found NCT6793D or compatible chip at 0x4e:0xa20
[    3.402556] usb 1-3.2: New USB device found, idVendor=0b05, idProduct=17cb
[    3.402557] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.402558] usb 1-3.2: Product: BCM920702 Bluetooth 4.0
[    3.402559] usb 1-3.2: Manufacturer: Broadcom Corp
[    3.402560] usb 1-3.2: SerialNumber: 5CF3706210FA
[    3.452334] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.459947] Bluetooth: Core ver 2.22
[    3.459954] NET: Registered protocol family 31
[    3.459955] Bluetooth: HCI device and connection manager initialized
[    3.459956] Bluetooth: HCI socket layer initialized
[    3.459957] Bluetooth: L2CAP socket layer initialized
[    3.459959] Bluetooth: SCO socket layer initialized
[    3.491363] usb 1-3.1.1: new high-speed USB device number 7 using xhci_hcd
[    3.503882] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.503978] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.503979] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.503980] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.503980] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.503980] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.503981] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.507743] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.517269] Bluetooth: HCI UART driver ver 2.3
[    3.517270] Bluetooth: HCI UART protocol H4 registered
[    3.517270] Bluetooth: HCI UART protocol BCSP registered
[    3.517279] Bluetooth: HCI UART protocol LL registered
[    3.517280] Bluetooth: HCI UART protocol ATH3K registered
[    3.517280] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    3.517301] Bluetooth: HCI UART protocol Intel registered
[    3.517308] Bluetooth: HCI UART protocol Broadcom registered
[    3.517309] Bluetooth: HCI UART protocol QCA registered
[    3.517309] Bluetooth: HCI UART protocol AG6XX registered
[    3.517310] Bluetooth: HCI UART protocol Marvell registered
[    3.521772] AVX2 version of gcm_enc/dec engaged.
[    3.521772] AES CTR mode by8 optimization enabled
[    3.563016] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.581606] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    3.581608] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[    3.585589] intel_rapl: Found RAPL domain package
[    3.585590] intel_rapl: Found RAPL domain core
[    3.585590] intel_rapl: Found RAPL domain uncore
[    3.585590] intel_rapl: Found RAPL domain dram
[    3.590394] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[    3.590432] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[    3.590465] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    3.590503] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    3.590535] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    3.590560] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    3.602140] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[    3.602619] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    3.602620] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.602621] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.602622] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.602622] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    3.602623] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.602624] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    3.602625] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    3.602626] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    3.604439] usb 1-3.1.1: New USB device found, idVendor=05e3, idProduct=0608
[    3.604451] usb 1-3.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.604451] usb 1-3.1.1: Product: USB2.0 Hub
[    3.605093] hub 1-3.1.1:1.0: USB hub found
[    3.605323] random: crng init done
[    3.605329] hub 1-3.1.1:1.0: 4 ports detected
[    3.617923] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    3.617990] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    3.618042] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    3.618085] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    3.618142] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    3.618185] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    3.618219] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    3.618242] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    3.618292] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    3.618313] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[    3.618333] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[    3.618361] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[    3.699490] usb 1-3.1.2: new high-speed USB device number 10 using xhci_hcd
[    3.775877] [drm] RC6 on
[    3.810898] audit: type=1400 audit(1502216898.545:2): apparmor="STATUS" operation="profile_load" name="content-hub-peer-picker" pid=911 comm="apparmor_parser"
[    3.810907] audit: type=1400 audit(1502216898.545:3): apparmor="STATUS" operation="profile_load" name="camera-app" pid=909 comm="apparmor_parser"
[    3.810918] audit: type=1400 audit(1502216898.545:4): apparmor="STATUS" operation="profile_load" name="gallery-app" pid=912 comm="apparmor_parser"
[    3.810929] audit: type=1400 audit(1502216898.545:5): apparmor="STATUS" operation="profile_load" name="address-book-app" pid=908 comm="apparmor_parser"
[    3.810939] audit: type=1400 audit(1502216898.545:6): apparmor="STATUS" operation="profile_load" name="content-hub-clipboard" pid=910 comm="apparmor_parser"
[    3.812543] audit: type=1400 audit(1502216898.546:7): apparmor="STATUS" operation="profile_load" name="url-dispatcher-bad-url-helper" pid=916 comm="apparmor_parser"
[    3.812761] audit: type=1400 audit(1502216898.546:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=921 comm="apparmor_parser"
[    3.812849] audit: type=1400 audit(1502216898.547:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/lxc-start" pid=919 comm="apparmor_parser"
[    3.813735] audit: type=1400 audit(1502216898.547:10): apparmor="STATUS" operation="profile_load" name="ubuntu-printing-app" pid=922 comm="apparmor_parser"
[    3.817565] usb 1-3.1.2: New USB device found, idVendor=04b8, idProduct=011b
[    3.817566] usb 1-3.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.817566] usb 1-3.1.2: Product: EPSON Scanner
[    3.817567] usb 1-3.1.2: Manufacturer: EPSON
[    3.876193] new mount options do not match the existing superblock, will be ignored
[    3.928379] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    3.931510] usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
[    4.017503] Process accounting resumed
[    4.187044] usb 2-3: New USB device found, idVendor=2109, idProduct=0812
[    4.187045] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.187046] usb 2-3: Product: USB3.0 Hub             
[    4.187047] usb 2-3: Manufacturer: VIA Labs, Inc.         
[    4.188733] hub 2-3:1.0: USB hub found
[    4.188919] hub 2-3:1.0: 4 ports detected
[    4.202840] rfkill: input handler disabled
[    4.303364] usb 1-13: new high-speed USB device number 8 using xhci_hcd
[    4.444851] usb 1-13: New USB device found, idVendor=2109, idProduct=2812
[    4.444853] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.444854] usb 1-13: Product: USB2.0 Hub             
[    4.444855] usb 1-13: Manufacturer: VIA Labs, Inc.         
[    4.445498] hub 1-13:1.0: USB hub found
[    4.445656] hub 1-13:1.0: 4 ports detected
[    4.475889]  sdb: sdb1 sdb2 sdb3
[    4.535395] usb 1-3.3: new high-speed USB device number 9 using xhci_hcd
[    4.651927] usb 1-3.3: New USB device found, idVendor=04e8, idProduct=329f
[    4.651929] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.651930] usb 1-3.3: Product: CLP-320 Series
[    4.651931] usb 1-3.3: Manufacturer: Samsung Electronics Co., Ltd.
[    4.651931] usb 1-3.3: SerialNumber: Z51WBAMZ901217W
[    4.731394] usb 1-3.1.1.3: new high-speed USB device number 11 using xhci_hcd
[    4.836448] usb 1-3.1.1.3: New USB device found, idVendor=045e, idProduct=02e6
[    4.836449] usb 1-3.1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.836450] usb 1-3.1.1.3: Product: XBOX ACC
[    4.836451] usb 1-3.1.1.3: Manufacturer: Microsoft Inc.
[    4.836451] usb 1-3.1.1.3: SerialNumber: 492523
[    4.915515] usb 2-3.1: new SuperSpeed USB device number 5 using xhci_hcd
[    4.962104] alx 0000:03:00.0 enp3s0: NIC Up: 1 Gbps Full
[    4.962338] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[    5.172312] usb 2-3.1: New USB device found, idVendor=2109, idProduct=0812
[    5.172314] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.172314] usb 2-3.1: Product: USB3.0 Hub             
[    5.172315] usb 2-3.1: Manufacturer: VIA Labs, Inc.         
[    5.175598] hub 2-3.1:1.0: USB hub found
[    5.175772] hub 2-3.1:1.0: 4 ports detected
[    5.263485] usb 1-3.4: new high-speed USB device number 12 using xhci_hcd
[    5.376100] usb 1-3.4: New USB device found, idVendor=0424, idProduct=2134
[    5.376101] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.376101] usb 1-3.4: Product: USB2134B
[    5.376102] usb 1-3.4: Manufacturer: SMSC
[    5.376767] hub 1-3.4:1.0: USB hub found
[    5.376849] hub 1-3.4:1.0: 4 ports detected
[    5.391189] usbcore: registered new interface driver btusb
[    5.400613] media: Linux media interface: v0.10
[    5.405417] Linux video capture interface: v2.00
[    5.412211] usblp 1-3.3:1.0: usblp3: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04E8 pid 0x329F
[    5.412226] usbcore: registered new interface driver usblp
[    5.413657] uvcvideo: Found UVC 1.00 device Rift Sensor (2833:0211)
[    5.415162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.415163] Bluetooth: BNEP filters: protocol multicast
[    5.415164] Bluetooth: BNEP socket layer initialized
[    5.467487] usb 1-13.1: new high-speed USB device number 13 using xhci_hcd
[    5.480155] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized!
[    5.480156] uvcvideo 2-1:1.0: Entity type for entity Processing 3 was not initialized!
[    5.480157] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized!
[    5.480242] input: Rift Sensor as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input29
[    5.480362] uvcvideo: Found UVC 1.00 device Rift Sensor (2833:0211)
[    5.502107] Bluetooth: hci0: BCM: chip id 63
[    5.518098] Bluetooth: hci0: ChromeLinux_9640
[    5.519096] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1467
[    5.521473] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17cb.hcd failed with error -2
[    5.521474] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17cb.hcd not found
[    5.547162] uvcvideo 2-2:1.0: Entity type for entity Extension 4 was not initialized!
[    5.547163] uvcvideo 2-2:1.0: Entity type for entity Processing 3 was not initialized!
[    5.547164] uvcvideo 2-2:1.0: Entity type for entity Camera 1 was not initialized!
[    5.547203] input: Rift Sensor as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/input/input30
[    5.547247] usbcore: registered new interface driver uvcvideo
[    5.547248] USB Video Class driver (1.1.1)
[    5.581219] Bluetooth: RFCOMM TTY layer initialized
[    5.581222] Bluetooth: RFCOMM socket layer initialized
[    5.581224] Bluetooth: RFCOMM ver 1.11
[    5.581677] usb 1-13.1: New USB device found, idVendor=2109, idProduct=2812
[    5.581678] usb 1-13.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.581679] usb 1-13.1: Product: USB2.0 Hub             
[    5.581679] usb 1-13.1: Manufacturer: VIA Labs, Inc.         
[    5.582396] hub 1-13.1:1.0: USB hub found
[    5.582559] hub 1-13.1:1.0: 4 ports detected
[    5.663478] usb 1-3.1.1.4: new full-speed USB device number 14 using xhci_hcd
[    5.767710] usb 1-3.1.1.4: New USB device found, idVendor=046d, idProduct=c52b
[    5.767711] usb 1-3.1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.767712] usb 1-3.1.1.4: Product: USB Receiver
[    5.767712] usb 1-3.1.1.4: Manufacturer: Logitech
[    5.783065] logitech-djreceiver 0003:046D:C52B.000A: hiddev4,hidraw7: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.1.1.4/input2
[    5.843489] usb 1-3.4.4: new high-speed USB device number 15 using xhci_hcd
[    5.912058] input: Logitech K350 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.1/1-3.1.1.4/1-3.1.1.4:1.2/0003:046D:C52B.000A/0003:046D:200A.000B/input/input31
[    5.912269] logitech-hidpp-device 0003:046D:200A.000B: input,hidraw8: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:00:14.0-3.1.1.4:1
[    5.918043] input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.1/1-3.1.1.4/1-3.1.1.4:1.2/0003:046D:C52B.000A/0003:046D:400A.000C/input/input32
[    5.918228] logitech-hidpp-device 0003:046D:400A.000C: input,hidraw9: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-3.1.1.4:2
[    6.044776] usb 1-3.4.4: New USB device found, idVendor=0bda, idProduct=0307
[    6.044777] usb 1-3.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.044778] usb 1-3.4.4: Product: USB3.0 Card Reader
[    6.044792] usb 1-3.4.4: Manufacturer: Realtek
[    6.044792] usb 1-3.4.4: SerialNumber: T14000033092
[    6.271394] usb 1-3.4.2: new high-speed USB device number 16 using xhci_hcd
[    6.372132] usb 1-3.4.2: New USB device found, idVendor=0424, idProduct=2134
[    6.372133] usb 1-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.372134] usb 1-3.4.2: Product: USB2134B
[    6.372134] usb 1-3.4.2: Manufacturer: SMSC
[    6.372751] hub 1-3.4.2:1.0: USB hub found
[    6.372771] hub 1-3.4.2:1.0: 3 ports detected
[    6.380546] usb-storage 1-3.4.4:1.0: USB Mass Storage device detected
[    6.380618] scsi host6: usb-storage 1-3.4.4:1.0
[    6.380660] usbcore: registered new interface driver usb-storage
[    6.381634] usbcore: registered new interface driver uas
[    6.659355] usb 1-3.4.2.3: new full-speed USB device number 17 using xhci_hcd
[    6.764359] usb 1-3.4.2.3: New USB device found, idVendor=04d8, idProduct=0b1f
[    6.764360] usb 1-3.4.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.764361] usb 1-3.4.2.3: Product: USB TO HID    Ver.2.00
[    6.764362] usb 1-3.4.2.3: Manufacturer: Microchip Technology Inc.
[    6.766775] hid-generic 0003:04D8:0B1F.000D: hiddev5,hidraw10: USB HID v1.11 Device [Microchip Technology Inc. USB TO HID    Ver.2.00] on usb-0000:00:14.0-3.4.2.3/input0
[    6.928851] kauditd_printk_skb: 40 callbacks suppressed
[    6.928853] audit: type=1400 audit(1502216901.663:51): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/usr/local/sbin/" pid=1963 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[    6.928854] audit: type=1400 audit(1502216901.663:52): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/usr/local/bin/" pid=1963 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[    6.943784] audit: type=1400 audit(1502216901.677:53): apparmor="DENIED" operation="capable" profile="/usr/sbin/ntpd" pid=2017 comm="ntpd" capability=12  capname="net_admin"
[    6.944897] audit: type=1400 audit(1502216901.679:54): apparmor="DENIED" operation="capable" profile="/usr/sbin/ntpd" pid=2017 comm="ntpd" capability=12  capname="net_admin"
[    6.945722] audit: type=1400 audit(1502216901.679:55): apparmor="DENIED" operation="capable" profile="/usr/sbin/ntpd" pid=2017 comm="ntpd" capability=12  capname="net_admin"
[    7.256011] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.274237] Ebtables v2.0 registered
[    7.307686] audit: type=1400 audit(1502216902.041:56): apparmor="DENIED" operation="capable" profile="/usr/sbin/libvirtd" pid=1973 comm="libvirtd" capability=10  capname="net_bind_service"
[    7.397607] scsi 6:0:0:0: Direct-Access     Generic- SD/MMC/MS/MSPRO  1.00 PQ: 0 ANSI: 4
[    7.397887] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    7.402612] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    7.469914] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    7.470478] virbr0: port 1(virbr0-nic) entered blocking state
[    7.470479] virbr0: port 1(virbr0-nic) entered disabled state
[    7.470521] device virbr0-nic entered promiscuous mode
[    7.501263] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    7.525863] virbr0: port 1(virbr0-nic) entered blocking state
[    7.525865] virbr0: port 1(virbr0-nic) entered listening state
[    7.540632] virbr0: port 1(virbr0-nic) entered disabled state
[   12.310159] FS-Cache: Loaded
[   12.321086] FS-Cache: Netfs 'nfs' registered for caching
[  152.255931] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.