ALC269VC speaker headphone troubles

Bug #1020676 reported by MatatTHC
8
This bug affects 1 person
Affects Status Importance Assigned to Milestone
pulseaudio (Ubuntu)
Expired
Undecided
Unassigned

Bug Description

When I plug in the headphone sound is muted for the speaker (which is nice) as well as the headphone.

Setting the Connector in the "Sound settings" to Speaker enables both (headphone and speaker).

I searched the internet. It was suggested to add:
a line:
options snd-hda-inteli model="laptop-amic"
to
/etc/modprobe.d/alsa-base.conf

I found the model for ALC269 (not the VC) but I'm not sure if it is the correct one.

ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: pulseaudio 1:1.1-0ubuntu15.1
ProcVersionSignature: Ubuntu 3.2.0-26.41-generic 3.2.19
Uname: Linux 3.2.0-26-generic x86_64
NonfreeKernelModules: fglrx wl
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu8
Architecture: amd64
ArecordDevices:
 **** List of CAPTURE Hardware Devices ****
 card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: anne 1996 F.... pulseaudio
Card0.Amixer.info:
 Card hw:0 'PCH'/'HDA Intel PCH at 0xc0800000 irq 50'
   Mixer name : 'Intel CougarPoint HDMI'
   Components : 'HDA:10ec0269,144dc0b3,00100202 HDA:80862805,80860101,00100000'
   Controls : 25
   Simple ctrls : 12
Date: Tue Jul 3 19:50:45 2012
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
ProcEnviron:
 TERM=xterm
 PATH=(custom, no user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: pulseaudio
UpgradeStatus: Upgraded to precise on 2012-03-18 (107 days ago)
dmi.bios.date: 11/21/2011
dmi.bios.vendor: Phoenix Technologies Ltd.
dmi.bios.version: 10FD
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 700Z3A/700Z4A/700Z5A/700Z5B
dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
dmi.board.version: FAB1
dmi.chassis.asset.tag: Asset Tag
dmi.chassis.type: 9
dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
dmi.chassis.version: 0.1
dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr10FD:bd11/21/2011:svnSAMSUNGELECTRONICSCO.,LTD.:pn700Z3A/700Z4A/700Z5A/700Z5B:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rn700Z3A/700Z4A/700Z5A/700Z5B:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1:
dmi.product.name: 700Z3A/700Z4A/700Z5A/700Z5B
dmi.product.version: 0.1
dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.
modified.conffile..etc.init.d.pulseaudio: [modified]
mtime.conffile..etc.init.d.pulseaudio: 2012-04-26T17:24:30

Revision history for this message
MatatTHC (matatthc) wrote :
Revision history for this message
MatatTHC (matatthc) wrote :

Need to add that this line did not solve the problem.

Revision history for this message
Ubuntu QA Website (ubuntuqa) wrote :

This bug has been reported on the Ubuntu ISO testing tracker.

A list of all reports related to this bug can be found here:
http://iso.qa.ubuntu.com/qatracker/reports/bugs/1020676

tags: added: iso-testing
Revision history for this message
Raymond (superquad-vortex2) wrote :
Download full text (3.4 KiB)

if node 0x17 is the subwoofer, there should be bass speaker playback switch at node 0x0f

it is strange to connect HP and speaker to same audio output 0x03

Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Bass Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals: [0x00 0x00]
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states: D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC269VC Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals: [0x2a 0x2a]
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states: D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0

Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: [0x00 0x00] [0x80 0x80]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x03 0x0b

Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals: [0x00] [0x00]
  Connection: 2
     0x02 0x0b

Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: [0x00 0x00]
  Pincap 0x00010014: OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states: D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c 0x0d*
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Headphone Jack", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: [0x00 0x00]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x0321101f: [Jack] HP Out at Ext Left
    Conn = 1/8, Color = Black
    DefAssociation = 0x1, Sequence = 0xf
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=01, enabled=1
  Power states: D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x0c 0x0d*

Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
  Control: name="Bass Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals: [0x00]
  Pincap 0x00000010: OUT
  Pin Default ...

Read more...

Revision history for this message
Daniel van Vugt (vanvugt) wrote :

Thank you for reporting this bug to Ubuntu.
Ubuntu 12.04 (precise) reached end-of-life on April 28, 2017.

See this document for currently supported Ubuntu releases:
https://wiki.ubuntu.com/Releases

We appreciate that this bug may be old and you might not be interested in discussing it any more. But if you are then please upgrade to the latest Ubuntu version and re-test.

Changed in pulseaudio (Ubuntu):
status: New → Incomplete
Revision history for this message
Launchpad Janitor (janitor) wrote :

[Expired for pulseaudio (Ubuntu) because there has been no activity for 60 days.]

Changed in pulseaudio (Ubuntu):
status: Incomplete → Expired
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.