[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-26-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #47-Ubuntu SMP Wed Nov 17 15:58:05 UTC 2010 (Ubuntu 2.6.32-26.47-generic 2.6.32.24+drm33.11) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=de796230-340f-40f3-ad4b-ca3d47c30079 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fea0000 (usable) [ 0.000000] BIOS-e820: 000000007fea0000 - 000000007feac000 (ACPI data) [ 0.000000] BIOS-e820: 000000007feac000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7fea0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-CFFFF uncachable [ 0.000000] D0000-D5FFF write-back [ 0.000000] D6000-D6FFF uncachable [ 0.000000] D7000-DBFFF write-protect [ 0.000000] DC000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fea0000 (usable) [ 0.000000] modified: 000000007fea0000 - 000000007feac000 (ACPI data) [ 0.000000] modified: 000000007feac000 - 000000007ff00000 (ACPI NVS) [ 0.000000] modified: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fea0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fea0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fea0000 @ 8000-c000 [ 0.000000] RAMDISK: 3727a000 - 37fefb55 [ 0.000000] ACPI: RSDP 00000000000f7c20 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 000000007fea3ed4 00034 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 000000007feabe3b 00074 (v01 HP Piranha 06040000 ATI 000F4240) [ 0.000000] ACPI: DSDT 000000007fea3f08 07F33 (v01 HP 309B 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007feacfc0 00040 [ 0.000000] ACPI: SSDT 000000007feabeaf 000CF (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 000000007feabf7e 00046 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: MCFG 000000007feabfc4 0003C (v01 HP PORSCHE 06040000 LOHR 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fea0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fea0000 [ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff] [ 0.000000] bootmap [000000000000f000 - 000000000001efd7] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fea0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fa64] TEXT DATA BSS ==> [0001000000 - 0001a2fa64] [ 0.000000] #3 [003727a000 - 0037fefb55] RAMDISK ==> [003727a000 - 0037fefb55] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a30124] BRK ==> [0001a30000 - 0001a30124] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000f7c50] f7c50 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fea0 [ 0.000000] On node 0 totalpages: 523834 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 101 pages reserved [ 0.000000] DMA zone: 3837 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7108 pages used for memmap [ 0.000000] DMA32 zone: 512732 pages, LIFO batch:31 [ 0.000000] SB4X0 revision 0x11 [ 0.000000] Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u2097152 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516569 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=de796230-340f-40f3-ad4b-ca3d47c30079 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ e3e6000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2042148k/2095744k available (5421k kernel code, 408k absent, 53188k reserved, 2980k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:256 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1790.766 MHz processor. [ 0.020008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3581.53 BogoMIPS (lpj=17907660) [ 0.020046] Security Framework initialized [ 0.020076] AppArmor: AppArmor initialized [ 0.020343] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.022616] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.023763] Mount-cache hash table entries: 256 [ 0.023980] Initializing cgroup subsys ns [ 0.023986] Initializing cgroup subsys cpuacct [ 0.023991] Initializing cgroup subsys memory [ 0.024004] Initializing cgroup subsys devices [ 0.024007] Initializing cgroup subsys freezer [ 0.024010] Initializing cgroup subsys net_cls [ 0.024039] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.024042] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.024045] CPU 0/0x0 -> Node 0 [ 0.024047] tseg: 007ff00000 [ 0.024052] mce: CPU supports 5 MCE banks [ 0.024068] Performance Events: AMD PMU driver. [ 0.024074] ... version: 0 [ 0.024077] ... bit width: 48 [ 0.024078] ... generic registers: 4 [ 0.024080] ... value mask: 0000ffffffffffff [ 0.024083] ... max period: 00007fffffffffff [ 0.024085] ... fixed-purpose events: 0 [ 0.024086] ... event mask: 000000000000000f [ 0.024103] SMP alternatives: switching to UP code [ 0.039265] Freeing SMP alternatives: 40k freed [ 0.039300] ACPI: Core revision 20090903 [ 0.050009] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.050015] ftrace: allocating 22543 entries in 89 pages [ 0.060147] Setting APIC routing to flat [ 0.060500] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.165860] CPU0: AMD Turion(tm) 64 Mobile Technology ML-34 stepping 02 [ 0.170000] Brought up 1 CPUs [ 0.170000] Total of 1 processors activated (3581.53 BogoMIPS). [ 0.170000] CPU0 attaching NULL sched-domain. [ 0.170000] devtmpfs: initialized [ 0.170000] regulator: core version 0.5 [ 0.170000] Time: 17:55:07 Date: 11/24/10 [ 0.170000] NET: Registered protocol family 16 [ 0.170000] node 0 link 0: io port [1000, fffff] [ 0.170000] TOM: 0000000080000000 aka 2048M [ 0.170000] node 0 link 0: mmio [a0000, bffff] [ 0.170000] node 0 link 0: mmio [f0000000, ffffffff] [ 0.170000] node 0 link 0: mmio [e0000000, efffffff] [ 0.170000] node 0 link 0: mmio [80000000, dfffffff] [ 0.170000] bus: [00,ff] on node 0 link 0 [ 0.170000] bus: 00 index 0 io port: [0, ffff] [ 0.170000] bus: 00 index 1 mmio: [a0000, bffff] [ 0.170000] bus: 00 index 2 mmio: [80000000, fcffffffff] [ 0.170000] ACPI: bus type pci registered [ 0.170000] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7 [ 0.170000] PCI: MCFG area at e0000000 reserved in E820 [ 0.170000] PCI: Using MMCONFIG at e0000000 - e07fffff [ 0.170000] PCI: Using configuration type 1 for base access [ 0.170000] bio: create slab at 0 [ 0.170000] ACPI: EC: Look up EC in DSDT [ 0.170000] ACPI: Interpreter enabled [ 0.170000] ACPI: (supports S0 S3 S4 S5) [ 0.170000] ACPI: Using IOAPIC for interrupt routing [ 0.220547] ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62 [ 0.220698] ACPI: No dock devices found. [ 0.221891] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.222015] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.222019] pci 0000:00:04.0: PME# disabled [ 0.222091] pci 0000:00:13.0: reg 10 32bit mmio: [0xc0000000-0xc0000fff] [ 0.222203] pci 0000:00:13.1: reg 10 32bit mmio: [0xc0001000-0xc0001fff] [ 0.222323] pci 0000:00:13.2: reg 10 32bit mmio: [0xc0002000-0xc0002fff] [ 0.222395] pci 0000:00:13.2: supports D1 D2 [ 0.222397] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.222403] pci 0000:00:13.2: PME# disabled [ 0.222460] pci 0000:00:14.0: reg 10 io port: [0x8400-0x840f] [ 0.222469] pci 0000:00:14.0: reg 14 32bit mmio: [0xc0003000-0xc00033ff] [ 0.222507] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.222574] pci 0000:00:14.1: reg 10 io port: [0x8430-0x8437] [ 0.222583] pci 0000:00:14.1: reg 14 io port: [0x8424-0x8427] [ 0.222593] pci 0000:00:14.1: reg 18 io port: [0x8428-0x842f] [ 0.222602] pci 0000:00:14.1: reg 1c io port: [0x8420-0x8423] [ 0.222611] pci 0000:00:14.1: reg 20 io port: [0x8410-0x841f] [ 0.222815] pci 0000:00:14.5: reg 10 32bit mmio: [0xc0003400-0xc00034ff] [ 0.222926] pci 0000:00:14.6: reg 10 32bit mmio: [0xc0003800-0xc00038ff] [ 0.223110] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xc8000000-0xcfffffff] [ 0.223115] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff] [ 0.223119] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff] [ 0.223129] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.223139] pci 0000:01:05.0: supports D1 D2 [ 0.223156] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.223160] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff] [ 0.223164] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff] [ 0.223223] pci 0000:00:04.0: bridge io port: [0x00-0xfff] [ 0.223227] pci 0000:00:04.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.223270] pci 0000:06:02.0: reg 10 32bit mmio: [0xc0204000-0xc0205fff] [ 0.223383] pci 0000:06:04.0: reg 10 32bit mmio: [0xc0208000-0xc0208fff] [ 0.223416] pci 0000:06:04.0: supports D1 D2 [ 0.223418] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.223425] pci 0000:06:04.0: PME# disabled [ 0.223487] pci 0000:06:04.2: reg 10 32bit mmio: [0xc0209000-0xc02097ff] [ 0.223498] pci 0000:06:04.2: reg 14 32bit mmio: [0xc0200000-0xc0203fff] [ 0.223573] pci 0000:06:04.2: supports D1 D2 [ 0.223576] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot [ 0.223582] pci 0000:06:04.2: PME# disabled [ 0.223640] pci 0000:06:04.3: reg 10 32bit mmio: [0xc0206000-0xc0207fff] [ 0.223720] pci 0000:06:04.3: supports D1 D2 [ 0.223722] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot [ 0.223728] pci 0000:06:04.3: PME# disabled [ 0.223785] pci 0000:06:04.4: reg 10 32bit mmio: [0xc020a000-0xc020a0ff] [ 0.223796] pci 0000:06:04.4: reg 14 32bit mmio: [0xc0209c00-0xc0209cff] [ 0.223807] pci 0000:06:04.4: reg 18 32bit mmio: [0xc0209800-0xc02098ff] [ 0.223871] pci 0000:06:04.4: supports D1 D2 [ 0.223873] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot [ 0.223879] pci 0000:06:04.4: PME# disabled [ 0.223946] pci 0000:06:06.0: reg 10 io port: [0xa000-0xa0ff] [ 0.223956] pci 0000:06:06.0: reg 14 32bit mmio: [0xc020a400-0xc020a4ff] [ 0.224027] pci 0000:06:06.0: supports D1 D2 [ 0.224030] pci 0000:06:06.0: PME# supported from D1 D2 D3hot D3cold [ 0.224036] pci 0000:06:06.0: PME# disabled [ 0.224098] pci 0000:00:14.4: transparent bridge [ 0.224106] pci 0000:00:14.4: bridge io port: [0xa000-0xafff] [ 0.224112] pci 0000:00:14.4: bridge 32bit mmio: [0xc0200000-0xc02fffff] [ 0.224159] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.224250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.224332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.224415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.226486] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 0.226590] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 0.226700] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.226803] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 0.226907] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 0.227010] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 0.227113] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.227217] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 0.227324] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.227329] vgaarb: loaded [ 0.227463] SCSI subsystem initialized [ 0.227536] libata version 3.00 loaded. [ 0.227617] usbcore: registered new interface driver usbfs [ 0.227631] usbcore: registered new interface driver hub [ 0.227663] usbcore: registered new device driver usb [ 0.227817] ACPI: WMI: Mapper loaded [ 0.227819] PCI: Using ACPI for IRQ routing [ 0.227826] pci 0000:00:04.0: BAR 13: can't allocate resource [ 0.227828] pci 0000:00:04.0: BAR 14: can't allocate resource [ 0.228008] NetLabel: Initializing [ 0.228010] NetLabel: domain hash size = 128 [ 0.228012] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.228028] NetLabel: unlabeled traffic allowed by default [ 0.228092] Switching to clocksource tsc [ 0.229993] AppArmor: AppArmor Filesystem Enabled [ 0.229993] pnp: PnP ACPI init [ 0.229993] ACPI: bus type pnp registered [ 0.229993] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling [ 0.241914] pnp: PnP ACPI: found 10 devices [ 0.241916] ACPI: ACPI bus type pnp unregistered [ 0.241931] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.241934] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.241938] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.241947] system 00:08: ioport range 0x1080-0x1080 has been reserved [ 0.241951] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.241954] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.241957] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.241960] system 00:08: ioport range 0x870-0x87f has been reserved [ 0.241964] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.241967] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.241970] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 0.241973] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.241977] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.241980] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 0.241983] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.241987] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 0.241990] system 00:08: ioport range 0x8000-0x805f has been reserved [ 0.241993] system 00:08: ioport range 0xf40-0xf47 has been reserved [ 0.241997] system 00:08: ioport range 0x280-0x293 has been reserved [ 0.242003] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.242006] system 00:09: iomem range 0xfff80000-0xffffffff has been reserved [ 0.246758] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.246762] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.246766] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff [ 0.246769] pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff [ 0.246774] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.246777] pci 0000:00:04.0: IO window: disabled [ 0.246780] pci 0000:00:04.0: MEM window: disabled [ 0.246783] pci 0000:00:04.0: PREFETCH window: disabled [ 0.246790] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 [ 0.246793] pci 0000:06:04.0: IO window: 0x00a400-0x00a4ff [ 0.246800] pci 0000:06:04.0: IO window: 0x00a800-0x00a8ff [ 0.246806] pci 0000:06:04.0: PREFETCH window: 0x80000000-0x83ffffff [ 0.246813] pci 0000:06:04.0: MEM window: 0x84000000-0x87ffffff [ 0.246819] pci 0000:00:14.4: PCI bridge, secondary bus 0000:06 [ 0.246824] pci 0000:00:14.4: IO window: 0xa000-0xafff [ 0.246831] pci 0000:00:14.4: MEM window: 0xc0200000-0xc02fffff [ 0.246836] pci 0000:00:14.4: PREFETCH window: 0x80000000-0x83ffffff [ 0.246856] pci 0000:00:04.0: setting latency timer to 64 [ 0.246877] alloc irq_desc for 20 on node 0 [ 0.246879] alloc kstat_irqs on node 0 [ 0.246885] pci 0000:06:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.246895] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.246898] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.246901] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.246904] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff] [ 0.246907] pci_bus 0000:01: resource 2 pref mem [0xc8000000-0xcfffffff] [ 0.246910] pci_bus 0000:02: resource 0 mem: [0x0-0xfff] [ 0.246913] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff] [ 0.246916] pci_bus 0000:06: resource 0 io: [0xa000-0xafff] [ 0.246919] pci_bus 0000:06: resource 1 mem: [0xc0200000-0xc02fffff] [ 0.246922] pci_bus 0000:06: resource 2 pref mem [0x80000000-0x83ffffff] [ 0.246925] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.246928] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.246931] pci_bus 0000:07: resource 0 io: [0xa400-0xa4ff] [ 0.246934] pci_bus 0000:07: resource 1 io: [0xa800-0xa8ff] [ 0.246937] pci_bus 0000:07: resource 2 pref mem [0x80000000-0x83ffffff] [ 0.246940] pci_bus 0000:07: resource 3 mem: [0x84000000-0x87ffffff] [ 0.246985] NET: Registered protocol family 2 [ 0.247147] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.248418] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.252796] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.253894] TCP: Hash tables configured (established 262144 bind 65536) [ 0.253897] TCP reno registered [ 0.254043] NET: Registered protocol family 1 [ 0.254063] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.254070] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.254146] pci 0000:01:05.0: Boot video device [ 0.254490] Trying to unpack rootfs image as initramfs... [ 0.282881] Scanning for low memory corruption every 60 seconds [ 0.283060] audit: initializing netlink socket (disabled) [ 0.283076] type=2000 audit(1290621306.281:1): initialized [ 0.312109] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.313913] VFS: Disk quotas dquot_6.5.2 [ 0.313987] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.314769] fuse init (API version 7.13) [ 0.314869] msgmni has been set to 3988 [ 0.315118] alg: No test for stdrng (krng) [ 0.315183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.315187] io scheduler noop registered [ 0.315189] io scheduler anticipatory registered [ 0.315191] io scheduler deadline registered [ 0.315231] io scheduler cfq registered (default) [ 0.321631] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.321664] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.333946] ACPI: AC Adapter [ACAD] (on-line) [ 0.334045] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.334101] ACPI: Lid Switch [LID] [ 0.334153] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.334156] ACPI: Power Button [PWRB] [ 0.334222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.334225] ACPI: Power Button [PWRF] [ 0.334280] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3 [ 0.334283] ACPI: Sleep Button [SLPF] [ 0.334446] Marking TSC unstable due to TSC halts in idle [ 0.334529] processor LNXCPU:00: registered as cooling_device0 [ 0.340452] Switching to clocksource acpi_pm [ 0.378711] ACPI: Invalid active0 threshold [ 0.380345] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.380356] ACPI: Thermal Zone [THRM] (0 C) [ 0.382028] Linux agpgart interface v0.103 [ 0.382069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.390303] alloc irq_desc for 17 on node 0 [ 0.390308] alloc kstat_irqs on node 0 [ 0.390320] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.390329] serial 0000:00:14.6: PCI INT B disabled [ 0.391503] brd: module loaded [ 0.392031] loop: module loaded [ 0.392154] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.392531] alloc irq_desc for 16 on node 0 [ 0.392534] alloc kstat_irqs on node 0 [ 0.392539] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.392593] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 0.392994] Fixed MDIO Bus: probed [ 0.393034] PPP generic driver version 2.4.2 [ 0.393072] tun: Universal TUN/TAP device driver, 1.6 [ 0.393074] tun: (C) 1999-2004 Max Krasnyansky [ 0.393159] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.393207] alloc irq_desc for 19 on node 0 [ 0.393209] alloc kstat_irqs on node 0 [ 0.393213] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.393236] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.393284] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 0.393363] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000 [ 0.410248] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.410439] usb usb1: configuration #1 chosen from 1 choice [ 0.410481] hub 1-0:1.0: USB hub found [ 0.410495] hub 1-0:1.0: 8 ports detected [ 0.410788] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.420118] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.420154] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.420259] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.420292] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000 [ 0.475455] ACPI: Battery Slot [BAT1] (battery present) [ 0.484440] usb usb2: configuration #1 chosen from 1 choice [ 0.484479] hub 2-0:1.0: USB hub found [ 0.484496] hub 2-0:1.0: 4 ports detected [ 0.490432] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.490466] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.490564] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.490597] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000 [ 0.554357] usb usb3: configuration #1 chosen from 1 choice [ 0.554398] hub 3-0:1.0: USB hub found [ 0.554415] hub 3-0:1.0: 4 ports detected [ 0.554520] uhci_hcd: USB Universal Host Controller Interface driver [ 0.554637] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.593277] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.593293] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.593507] mice: PS/2 mouse device common for all mice [ 0.594598] rtc_cmos 00:04: RTC can wake from S4 [ 0.594662] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.594692] rtc0: alarms up to one month, 114 bytes nvram [ 0.594885] device-mapper: uevent: version 1.0.3 [ 0.595027] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.595091] device-mapper: multipath: version 1.1.0 loaded [ 0.595094] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.598618] cpuidle: using governor ladder [ 0.598688] cpuidle: using governor menu [ 0.599127] TCP cubic registered [ 0.599312] NET: Registered protocol family 10 [ 0.599846] lo: Disabled Privacy Extensions [ 0.600284] NET: Registered protocol family 17 [ 0.600325] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-34 processors (1 cpu cores) (version 2.20.00) [ 0.606439] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4 [ 0.606443] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6 [ 0.606446] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16 [ 0.606502] powernow-k8: ph2 null fid transition 0xa [ 0.606666] PM: Resume from disk failed. [ 0.606691] registered taskstats version 1 [ 0.607091] Magic number: 2:529:947 [ 0.607123] tty tty4: hash matches [ 0.607203] rtc_cmos 00:04: setting system clock to 2010-11-24 17:55:07 UTC (1290621307) [ 0.607206] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.607208] EDD information not available. [ 0.611179] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.696944] Freeing initrd memory: 13782k freed [ 0.711850] Freeing unused kernel memory: 876k freed [ 0.712799] Write protecting the kernel read-only data: 7696k [ 0.733227] udev: starting version 151 [ 0.932438] vga16fb: initializing [ 0.932445] vga16fb: mapped to 0xffff8800000a0000 [ 0.932549] fb0: VGA16 VGA frame buffer device [ 0.952944] scsi0 : pata_atiixp [ 0.953540] scsi1 : pata_atiixp [ 0.955067] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14 [ 0.955071] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15 [ 0.967907] alloc irq_desc for 21 on node 0 [ 0.967916] alloc kstat_irqs on node 0 [ 0.967925] b43-pci-bridge 0000:06:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.975042] acpi device:10: registered as cooling_device1 [ 0.975200] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input6 [ 0.975261] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.080082] ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0 [ 1.167728] ata1.00: ATA-7: WDC WD1600BEVE-00UYT0, 01.04A01, max UDMA/100 [ 1.167732] ata1.00: 312581808 sectors, multi 16: LBA48 [ 1.190040] usb 3-2: new full speed USB device using ohci_hcd and address 2 [ 1.201459] ata1.00: configured for UDMA/100 [ 1.201585] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVE-0 01.0 PQ: 0 ANSI: 5 [ 1.201760] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.202117] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.202171] sd 0:0:0:0: [sda] Write Protect is off [ 1.202174] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.202203] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.202356] sda: sda1 sda2 < sda5 > [ 1.233534] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.380612] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2 [ 1.419414] usb 3-2: configuration #1 chosen from 1 choice [ 1.420593] ata2.00: configured for MWDMA2 [ 1.426440] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5 [ 1.442869] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.442875] Uniform CD-ROM driver Revision: 3.20 [ 1.443014] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.443093] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.454082] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.472791] alloc irq_desc for 23 on node 0 [ 1.472794] alloc kstat_irqs on node 0 [ 1.472804] ohci1394 0000:06:04.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 [ 1.511311] usbcore: registered new interface driver hiddev [ 1.563967] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[c0209000-c02097ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.564544] input: Logitech Logitech Speaker Lapdesk N700 as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.2/input/input7 [ 1.564669] generic-usb 0003:046D:0A1A.0001: input,hidraw0: USB HID v1.00 Device [Logitech Logitech Speaker Lapdesk N700] on usb-0000:00:13.1-2/input2 [ 1.564701] usbcore: registered new interface driver usbhid [ 1.564704] usbhid: v2.6:USB HID core driver [ 1.568436] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.572124] 8139too Fast Ethernet driver 0.9.28 [ 1.572766] alloc irq_desc for 22 on node 0 [ 1.572769] alloc kstat_irqs on node 0 [ 1.572777] 8139too 0000:06:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.574593] eth0: RealTek RTL8139 at 0xa000, 00:16:d4:0d:91:0e, IRQ 22 [ 1.578156] Console: switching to colour frame buffer device 80x30 [ 1.780032] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 2.000650] usb 2-3: configuration #1 chosen from 1 choice [ 2.008639] input: C-Media Electronics Inc. USB Audio Device as /devices/pci0000:00/0000:00:13.0/usb2/2-3/2-3:1.3/input/input8 [ 2.008758] generic-usb 0003:0D8C:0105.0002: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:00:13.0-3/input3 [ 2.173252] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.173258] EXT4-fs (sda1): write access will be enabled during recovery [ 4.437196] EXT4-fs (sda1): recovery complete [ 4.437829] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 25.419691] Adding 6022136k swap on /dev/sda5. Priority:-1 extents:1 across:6022136k [ 25.456062] udev: starting version 151 [ 25.519879] lp: driver loaded but no devices found [ 25.712585] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0 [ 25.762558] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.028411] EDAC MC: Ver: 2.1.0 Nov 17 2010 [ 26.124421] cfg80211: Calling CRDA to update world regulatory domain [ 26.131862] yenta_cardbus 0000:06:04.0: CardBus bridge found [103c:309b] [ 26.131889] yenta_cardbus 0000:06:04.0: Enabling burst memory read transactions [ 26.131896] yenta_cardbus 0000:06:04.0: Using INTVAL to route CSC interrupts to PCI [ 26.131899] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to ISA [ 26.131906] yenta_cardbus 0000:06:04.0: TI: mfunc 0x00a61b22, devctl 0x64 [ 26.147190] type=1505 audit(1290621333.032:2): operation="profile_load" pid=644 name="/sbin/dhclient3" [ 26.147516] type=1505 audit(1290621333.032:3): operation="profile_load" pid=644 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 26.147700] type=1505 audit(1290621333.032:4): operation="profile_load" pid=644 name="/usr/lib/connman/scripts/dhclient-script" [ 26.163528] type=1505 audit(1290621333.052:5): operation="profile_load" pid=663 name="/usr/sbin/ntpd" [ 26.167744] sdhci: Secure Digital Host Controller Interface driver [ 26.167747] sdhci: Copyright(c) Pierre Ossman [ 26.172032] EDAC amd64_edac: Ver: 3.2.0 Nov 17 2010 [ 26.188727] cfg80211: World regulatory domain updated: [ 26.188732] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.188735] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.188738] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.188741] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.188744] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.188747] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.196627] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 26.196635] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 26.196637] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 26.196638] (Note that use of the override may cause unknown side effects.) [ 26.196660] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 26.340316] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 26.344307] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.380861] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 20 [ 26.380867] yenta_cardbus 0000:06:04.0: Socket status: 30000006 [ 26.380877] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 26.380881] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff [ 26.380885] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff [ 26.400092] sdhci-pci 0000:06:04.4: SDHCI controller found [104c:8034] (rev 0) [ 26.400118] sdhci-pci 0000:06:04.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 26.400378] Registered led device: mmc0:: [ 26.400502] mmc0: SDHCI controller on PCI [0000:06:04.4] using PIO [ 26.400620] Registered led device: mmc1:: [ 26.400709] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO [ 26.400814] Registered led device: mmc2:: [ 26.400907] mmc2: SDHCI controller on PCI [0000:06:04.4] using PIO [ 26.418216] tifm_7xx1 0000:06:04.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 26.501682] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 26.503187] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 26.503191] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 26.503194] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 26.659372] phy0: Selected rate control algorithm 'minstrel' [ 26.660395] Registered led device: b43-phy0::radio [ 26.660480] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 26.791469] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 26.836734] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 26.920185] MC'97 0 converters and GPIO not ready (0x1) [ 26.937072] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 27.070108] usbcore: registered new interface driver snd-usb-audio [ 27.148853] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 27.247592] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 55.635496] type=1505 audit(1290621362.522:6): operation="profile_load" pid=1085 name="/usr/share/gdm/guest-session/Xsession" [ 55.642486] type=1505 audit(1290621362.532:7): operation="profile_replace" pid=1087 name="/sbin/dhclient3" [ 55.642831] type=1505 audit(1290621362.532:8): operation="profile_replace" pid=1087 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 55.643023] type=1505 audit(1290621362.532:9): operation="profile_replace" pid=1087 name="/usr/lib/connman/scripts/dhclient-script" [ 55.679841] type=1505 audit(1290621362.562:10): operation="profile_load" pid=1090 name="/usr/bin/evince" [ 55.684379] type=1505 audit(1290621362.572:11): operation="profile_load" pid=1090 name="/usr/bin/evince-previewer" [ 55.686977] type=1505 audit(1290621362.572:12): operation="profile_load" pid=1090 name="/usr/bin/evince-thumbnailer" [ 55.708637] type=1505 audit(1290621362.592:13): operation="profile_load" pid=1094 name="/usr/lib/cups/backend/cups-pdf" [ 55.709045] type=1505 audit(1290621362.592:14): operation="profile_load" pid=1094 name="/usr/sbin/cupsd" [ 55.713687] type=1505 audit(1290621362.602:15): operation="profile_load" pid=1095 name="/usr/sbin/mysqld" [ 55.810129] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 55.819613] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 55.827031] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 55.835261] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 55.978168] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 56.015847] pci 0000:01:05.0: power state changed by ACPI to D0 [ 56.015856] pci 0000:01:05.0: power state changed by ACPI to D0 [ 56.015866] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 56.055202] [drm] Initialized drm 1.1.0 20060810 [ 56.074520] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 56.081461] eth0: link down [ 56.081937] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 56.165492] [drm] radeon defaulting to kernel modesetting. [ 56.165496] [drm] radeon kernel modesetting enabled. [ 56.175556] [drm] radeon: Initializing kernel modesetting. [ 56.176807] [drm] register mmio base: 0xC0100000 [ 56.176810] [drm] register mmio size: 65536 [ 56.177138] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 56.177157] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?) [ 56.177163] [drm] Generation 2 PCI interface, using max accessible memory [ 56.177166] [drm] radeon: VRAM 128M [ 56.177168] [drm] radeon: VRAM from 0x80000000 to 0x87FFFFFF [ 56.177170] [drm] radeon: GTT 32M [ 56.177172] [drm] radeon: GTT from 0x88000000 to 0x89FFFFFF [ 56.177198] [drm] radeon: irq initialized. [ 56.177473] [drm] Detected VRAM RAM=128M, BAR=128M [ 56.177479] [drm] RAM width 128bits DDR [ 56.180805] [TTM] Zone kernel: Available graphics memory: 1028426 kiB. [ 56.180831] [drm] radeon: 128M of VRAM memory ready [ 56.180834] [drm] radeon: 32M of GTT memory ready. [ 56.180854] [drm] GART: num cpu pages 8192, num gpu pages 8192 [ 56.181329] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 56.181345] [drm] radeon: cp idle (0x10000C03) [ 56.181397] [drm] Loading R300 Microcode [ 56.181804] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 56.189988] [drm] radeon: ring at 0x0000000088000000 [ 56.190101] [drm] ring test succeeded in 2 usecs [ 56.190263] [drm] radeon: ib pool ready. [ 56.191345] [drm] ib test succeeded in 0 usecs [ 56.191386] [drm] Default TV standard: NTSC [ 56.191388] [drm] 14.318180000 MHz TV ref clk [ 56.191708] [drm] Panel ID String: LPL [ 56.191711] [drm] Panel Size 1440x900 [ 56.191764] [drm] Default TV standard: NTSC [ 56.191766] [drm] 14.318180000 MHz TV ref clk [ 56.191801] [drm] Radeon Display Connectors [ 56.191803] [drm] Connector 0: [ 56.191805] [drm] VGA [ 56.191807] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 56.191809] [drm] Encoders: [ 56.191811] [drm] CRT1: INTERNAL_DAC2 [ 56.191813] [drm] Connector 1: [ 56.191814] [drm] LVDS [ 56.191817] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [ 56.191819] [drm] Encoders: [ 56.191820] [drm] LCD1: INTERNAL_LVDS [ 56.191822] [drm] Connector 2: [ 56.191823] [drm] S-video [ 56.191825] [drm] Encoders: [ 56.191826] [drm] TV1: INTERNAL_DAC2 [ 56.344819] [drm] fb mappable at 0xC8040000 [ 56.344823] [drm] vram apper at 0xC8000000 [ 56.344825] [drm] size 5184000 [ 56.344827] [drm] fb depth is 24 [ 56.344829] [drm] pitch is 5760 [ 56.345566] fb1: radeondrmfb frame buffer device [ 56.345568] registered panic notifier [ 56.345575] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 [ 56.771753] NET: Registered protocol family 15 [ 56.788460] alg: No test for cipher_null (cipher_null-generic) [ 56.792204] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 56.810048] alg: No test for digest_null (digest_null-generic) [ 56.811216] alg: No test for compress_null (compress_null-generic) [ 56.913329] padlock: VIA PadLock Hash Engine not detected. [ 56.987011] padlock: VIA PadLock Hash Engine not detected. [ 57.180181] Intel AES-NI instructions are not detected. [ 57.183155] padlock: VIA PadLock not detected. [ 59.084881] ppdev: user-space parallel port driver [ 63.894266] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 65.980052] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 66.044579] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 66.177046] eth0: link down [ 66.184772] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 66.650072] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 66.714302] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 76.931297] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 76.994923] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 77.097840] eth0: link down [ 77.098921] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 77.850051] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 77.913114] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 78.174094] wlan0: direct probe to AP 00:18:39:3d:a3:e9 (try 1) [ 78.175910] wlan0: direct probe responded [ 78.175914] wlan0: authenticate with AP 00:18:39:3d:a3:e9 (try 1) [ 78.177728] wlan0: authenticated [ 78.177756] wlan0: associate with AP 00:18:39:3d:a3:e9 (try 1) [ 78.180162] wlan0: RX AssocResp from 00:18:39:3d:a3:e9 (capab=0x411 status=0 aid=1) [ 78.180168] wlan0: associated [ 78.181343] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 78.470074] [UFW BLOCK] IN= OUT=wlan0 SRC=192.168.1.151 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 78.486358] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 78.561418] [UFW BLOCK] IN= OUT=wlan0 SRC=192.168.1.151 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86 [ 78.587195] [UFW BLOCK] IN= OUT=wlan0 SRC=192.168.1.151 DST=224.0.0.251 LEN=231 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=211 [ 78.587292] [UFW BLOCK] IN= OUT=wlan0 SRC=192.168.1.151 DST=224.0.0.251 LEN=142 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=122 [ 78.830041] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 78.920754] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 79.072127] eth0: link down [ 79.081290] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 80.411016] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 80.430235] wlan0: direct probe to AP 00:18:39:3d:a3:e9 (try 1) [ 80.432728] wlan0: direct probe responded [ 80.432732] wlan0: authenticate with AP 00:18:39:3d:a3:e9 (try 1) [ 80.435772] wlan0: authenticated [ 80.435803] wlan0: associate with AP 00:18:39:3d:a3:e9 (try 1) [ 80.437768] wlan0: RX AssocResp from 00:18:39:3d:a3:e9 (capab=0x411 status=0 aid=1) [ 80.437772] wlan0: associated [ 80.439119] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 80.898840] Valid eCryptfs headers not found in file header region or xattr region [ 80.898848] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 90.653395] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 91.000052] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 91.101155] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 91.178403] eth0: link down [ 91.185091] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 91.610051] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 91.693809] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 92.670049] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 92.753829] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 92.823198] eth0: link down [ 92.825010] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 93.841378] wlan0: direct probe to AP 00:18:39:3d:a3:e9 (try 1) [ 93.849916] wlan0: direct probe responded [ 93.849924] wlan0: authenticate with AP 00:18:39:3d:a3:e9 (try 1) [ 93.851671] wlan0: authenticated [ 93.851699] wlan0: associate with AP 00:18:39:3d:a3:e9 (try 1) [ 93.853711] wlan0: RX AssocResp from 00:18:39:3d:a3:e9 (capab=0x411 status=12 aid=0) [ 93.853717] wlan0: AP denied association (code=12) [ 93.853736] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 99.650155] wlan0: direct probe to AP 00:18:39:3d:a3:e9 (try 1) [ 99.654235] wlan0: direct probe responded [ 99.654243] wlan0: authenticate with AP 00:18:39:3d:a3:e9 (try 1) [ 99.656023] wlan0: authenticated [ 99.656063] wlan0: associate with AP 00:18:39:3d:a3:e9 (try 1) [ 99.658933] wlan0: RX AssocResp from 00:18:39:3d:a3:e9 (capab=0x411 status=0 aid=1) [ 99.658939] wlan0: associated [ 99.661834] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 100.608097] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 100.950047] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 101.033918] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 101.118256] eth0: link down [ 101.120589] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 101.600054] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 101.683845] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 102.610047] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 102.710938] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 102.786275] eth0: link down [ 102.788096] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 103.860995] wlan0: direct probe to AP 00:18:39:3d:a3:e9 (try 1) [ 103.862814] wlan0: direct probe responded [ 103.862822] wlan0: authenticate with AP 00:18:39:3d:a3:e9 (try 1) [ 103.864590] wlan0: authenticated [ 103.864616] wlan0: associate with AP 00:18:39:3d:a3:e9 (try 1) [ 103.870896] wlan0: RX AssocResp from 00:18:39:3d:a3:e9 (capab=0x411 status=12 aid=0) [ 103.870901] wlan0: AP denied association (code=12) [ 103.870922] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 103.872816] wlan0: direct probe to AP 00:18:39:3d:a3:e9 (try 1) [ 103.874613] wlan0: direct probe responded [ 103.874619] wlan0: authenticate with AP 00:18:39:3d:a3:e9 (try 1) [ 103.876538] wlan0: authenticated [ 103.876586] wlan0: associate with AP 00:18:39:3d:a3:e9 (try 1) [ 103.879645] wlan0: RX AssocResp from 00:18:39:3d:a3:e9 (capab=0x411 status=12 aid=0) [ 103.879651] wlan0: AP denied association (code=12) [ 103.879670] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 103.886207] wlan0: direct probe to AP 00:18:39:3d:a3:e9 (try 1) [ 103.888548] wlan0: direct probe responded [ 103.888557] wlan0: authenticate with AP 00:18:39:3d:a3:e9 (try 1) [ 103.890170] wlan0: authenticated [ 103.890194] wlan0: associate with AP 00:18:39:3d:a3:e9 (try 1) [ 103.892221] wlan0: RX AssocResp from 00:18:39:3d:a3:e9 (capab=0x411 status=12 aid=0) [ 103.892226] wlan0: AP denied association (code=12) [ 103.892243] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 108.775807] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 108.870648] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 108.910312] wlan0: direct probe to AP 00:18:39:3d:a3:e9 (try 1) [ 108.912121] wlan0: direct probe responded [ 108.912125] wlan0: authenticate with AP 00:18:39:3d:a3:e9 (try 1) [ 108.913873] wlan0: authenticated [ 108.913902] wlan0: associate with AP 00:18:39:3d:a3:e9 (try 1) [ 108.917082] wlan0: RX AssocResp from 00:18:39:3d:a3:e9 (capab=0x411 status=12 aid=0) [ 108.917088] wlan0: AP denied association (code=12) [ 108.917106] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 108.942744] eth0: link down [ 108.944422] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 112.560145] wlan0: direct probe to AP 00:18:39:3d:a3:e9 (try 1) [ 112.561963] wlan0: direct probe responded [ 112.561971] wlan0: authenticate with AP 00:18:39:3d:a3:e9 (try 1) [ 112.563722] wlan0: authenticated [ 112.563764] wlan0: associate with AP 00:18:39:3d:a3:e9 (try 1) [ 112.566076] wlan0: RX AssocResp from 00:18:39:3d:a3:e9 (capab=0x411 status=0 aid=1) [ 112.566083] wlan0: associated [ 112.567750] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 123.470036] wlan0: no IPv6 routers present [ 211.624517] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 211.831218] wlan0: deauthenticating from 00:18:39:3d:a3:e9 by local choice (reason=3) [ 212.020133] wlan0: direct probe to AP 00:18:39:3d:a3:e9 (try 1) [ 212.021919] wlan0: direct probe responded [ 212.021926] wlan0: authenticate with AP 00:18:39:3d:a3:e9 (try 1) [ 212.023632] wlan0: authenticated [ 212.023656] wlan0: associate with AP 00:18:39:3d:a3:e9 (try 1) [ 212.025873] wlan0: RX AssocResp from 00:18:39:3d:a3:e9 (capab=0x411 status=0 aid=1) [ 212.025877] wlan0: associated [ 1136.916165] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=68.87.85.104 DST=192.168.1.151 LEN=70 TOS=0x00 PREC=0x40 TTL=55 ID=0 DF PROTO=UDP SPT=53 DPT=25306 LEN=50 [ 1150.839545] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=80.238.171.182 DST=192.168.1.151 LEN=63 TOS=0x00 PREC=0x20 TTL=114 ID=1184 PROTO=UDP SPT=43820 DPT=33294 LEN=43 [ 1275.232907] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=221.215.38.171 DST=192.168.1.151 LEN=40 TOS=0x00 PREC=0x20 TTL=106 ID=256 PROTO=TCP SPT=6000 DPT=1433 WINDOW=16384 RES=0x00 SYN URGP=0 [ 1378.358584] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=80.238.171.182 DST=192.168.1.151 LEN=52 TOS=0x00 PREC=0x20 TTL=114 ID=4567 DF PROTO=TCP SPT=49588 DPT=33294 WINDOW=8192 RES=0x00 SYN URGP=0 [ 1841.309048] Valid eCryptfs headers not found in file header region or xattr region [ 1841.309056] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 1841.323338] Valid eCryptfs headers not found in file header region or xattr region [ 1841.323347] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 3077.824135] Valid eCryptfs headers not found in file header region or xattr region [ 3077.824142] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 3077.839049] Valid eCryptfs headers not found in file header region or xattr region [ 3077.839058] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 3569.622453] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=85.119.91.116 DST=192.168.1.151 LEN=60 TOS=0x00 PREC=0x20 TTL=46 ID=26479 DF PROTO=TCP SPT=41975 DPT=6881 WINDOW=5840 RES=0x00 SYN URGP=0 [ 3572.697976] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=85.119.91.116 DST=192.168.1.151 LEN=60 TOS=0x00 PREC=0x20 TTL=46 ID=26480 DF PROTO=TCP SPT=41975 DPT=6881 WINDOW=5840 RES=0x00 SYN URGP=0 [ 3578.643971] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=85.119.91.116 DST=192.168.1.151 LEN=60 TOS=0x00 PREC=0x20 TTL=46 ID=26481 DF PROTO=TCP SPT=41975 DPT=6881 WINDOW=5840 RES=0x00 SYN URGP=0 [ 4150.056392] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=222.186.26.88 DST=192.168.1.151 LEN=40 TOS=0x00 PREC=0x20 TTL=109 ID=256 DF PROTO=TCP SPT=12200 DPT=8000 WINDOW=8192 RES=0x00 SYN URGP=0 [ 4193.794949] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=222.186.26.88 DST=192.168.1.151 LEN=40 TOS=0x00 PREC=0x20 TTL=109 ID=256 DF PROTO=TCP SPT=12200 DPT=80 WINDOW=8192 RES=0x00 SYN URGP=0 [ 4911.735055] __ratelimit: 12 callbacks suppressed [ 4911.735062] npviewer.bin[3284]: segfault at 877a1c58 ip 00000000877a1c58 sp 00000000877a1c58 error 14 [ 5008.526107] Valid eCryptfs headers not found in file header region or xattr region [ 5008.526116] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 5008.548857] Valid eCryptfs headers not found in file header region or xattr region [ 5008.548866] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 5039.872517] Valid eCryptfs headers not found in file header region or xattr region [ 5039.872525] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 5039.893214] Valid eCryptfs headers not found in file header region or xattr region [ 5039.893222] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 5266.122985] npviewer.bin[6748]: segfault at 0 ip 00000000f61d1ed1 sp 00000000ffdfb7d0 error 4 in libflashplayer.so[f5e32000+b2e000] [ 5274.371930] npviewer.bin[7013]: segfault at 0 ip 00000000f621fed1 sp 00000000ffe2cf80 error 4 in libflashplayer.so[f5e80000+b2e000] [ 5298.824480] npviewer.bin[7029]: segfault at 0 ip 00000000f6183ed1 sp 00000000ffc70310 error 4 in libflashplayer.so[f5de4000+b2e000] [ 5338.571687] npviewer.bin[7061]: segfault at 0 ip 00000000f622aed1 sp 00000000ffdfa620 error 4 in libflashplayer.so[f5e8b000+b2e000] [ 5343.981232] npviewer.bin[7099]: segfault at 0 ip 00000000f6234ed1 sp 00000000ffe15f70 error 4 in libflashplayer.so[f5e95000+b2e000] [ 5711.312782] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=94.141.71.170 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=110 ID=5780 DF PROTO=TCP SPT=2104 DPT=4899 WINDOW=65535 RES=0x00 SYN URGP=0 [ 5739.044960] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=222.186.24.74 DST=192.168.1.151 LEN=40 TOS=0x00 PREC=0x20 TTL=109 ID=256 DF PROTO=TCP SPT=12200 DPT=7212 WINDOW=8192 RES=0x00 SYN URGP=0 [ 5800.944438] npviewer.bin[7334]: segfault at 0 ip 00000000f6155ed1 sp 00000000ffe6d7b0 error 4 in libflashplayer.so[f5db6000+b2e000] [ 5844.863430] npviewer.bin[7469]: segfault at 418 ip 00000000f605fc86 sp 00000000ffd9acb8 error 6 in libflashplayer.so[f5e10000+b2e000] [ 6019.629352] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=221.1.220.185 DST=192.168.1.151 LEN=40 TOS=0x00 PREC=0x20 TTL=114 ID=256 DF PROTO=TCP SPT=12200 DPT=1022 WINDOW=8192 RES=0x00 SYN URGP=0 [ 6843.653959] npviewer.bin[8075]: segfault at 0 ip 00000000f618bed1 sp 00000000ffec3330 error 4 in libflashplayer.so[f5dec000+b2e000] [ 6983.413562] npviewer.bin[8223]: segfault at 418 ip 00000000f5ff9c86 sp 00000000ffc95968 error 6 in libflashplayer.so[f5daa000+b2e000] [ 8398.526276] Valid eCryptfs headers not found in file header region or xattr region [ 8398.526284] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 8398.548702] Valid eCryptfs headers not found in file header region or xattr region [ 8398.548710] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [ 8975.614845] npviewer.bin[8392]: segfault at 418 ip 00000000f6064c86 sp 00000000ffb00c48 error 6 in libflashplayer.so[f5e15000+b2e000] [ 9054.948148] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=75.125.148.122 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=115 ID=18646 PROTO=TCP SPT=49771 DPT=5900 WINDOW=65535 RES=0x00 SYN URGP=0 [ 9787.788932] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=189.74.24.188 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=114 ID=40216 DF PROTO=TCP SPT=1384 DPT=4899 WINDOW=65535 RES=0x00 SYN URGP=0 [10402.835965] gnome-screensav[10567]: segfault at 4 ip 00007fc4bc77012e sp 00007fffc0ad5cd0 error 4 in libGL.so.1.2[7fc4bc71a000+a2000] [10403.076852] glmatrix[10569]: segfault at 4 ip 00007f414d33712e sp 00007fff7bf5dc10 error 4 in libGL.so.1.2[7f414d2e1000+a2000] [11003.008290] glmatrix[10933]: segfault at 4 ip 00007f27ea7b712e sp 00007fffd41ec180 error 4 in libGL.so.1.2[7f27ea761000+a2000] [11009.163830] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=75.189.193.138 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=49 ID=12685 DF PROTO=TCP SPT=52575 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [11010.126730] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=75.189.193.138 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=49 ID=24528 DF PROTO=TCP SPT=52575 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [11010.945880] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=75.189.193.138 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=49 ID=23466 DF PROTO=TCP SPT=52575 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [11012.158719] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=75.189.193.138 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=49 ID=38826 DF PROTO=TCP SPT=52575 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [11018.528565] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=75.189.193.138 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=49 ID=62380 DF PROTO=TCP SPT=52575 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 [11603.008290] glmatrix[11297]: segfault at 4 ip 00007f827edb612e sp 00007fffa541e030 error 4 in libGL.so.1.2[7f827ed60000+a2000] [12203.007740] glmatrix[11666]: segfault at 4 ip 00007fb720dbb12e sp 00007fff98ac5790 error 4 in libGL.so.1.2[7fb720d65000+a2000] [12473.189711] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=94.141.161.44 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=48 ID=42895 DF PROTO=TCP SPT=55474 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [12474.118077] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=94.141.161.44 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=48 ID=10112 DF PROTO=TCP SPT=55474 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [12475.088579] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=94.141.161.44 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=48 ID=39559 DF PROTO=TCP SPT=55474 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [12476.093097] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=94.141.161.44 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=48 ID=21178 DF PROTO=TCP SPT=55474 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [12477.098600] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=94.141.161.44 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=48 ID=12197 DF PROTO=TCP SPT=55474 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [12478.154165] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=94.141.161.44 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=48 ID=26313 DF PROTO=TCP SPT=55474 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [12480.110882] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=94.141.161.44 DST=192.168.1.151 LEN=64 TOS=0x00 PREC=0x20 TTL=48 ID=167 DF PROTO=TCP SPT=55474 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [12484.130401] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=94.141.161.44 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=48 ID=14832 DF PROTO=TCP SPT=55474 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [12492.229257] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=94.141.161.44 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=48 ID=4793 DF PROTO=TCP SPT=55474 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 [14265.912994] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=207.61.160.165 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=116 ID=10441 DF PROTO=TCP SPT=2646 DPT=5900 WINDOW=65535 RES=0x00 SYN URGP=0 [14268.835865] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=207.61.160.165 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=116 ID=11035 DF PROTO=TCP SPT=2646 DPT=5900 WINDOW=65535 RES=0x00 SYN URGP=0 [14304.029588] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=218.60.132.111 DST=192.168.1.151 LEN=40 TOS=0x00 PREC=0x20 TTL=104 ID=256 PROTO=TCP SPT=6000 DPT=2967 WINDOW=16384 RES=0x00 SYN URGP=0 [14477.538740] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [14477.561656] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=192.168.1.1 DST=192.168.1.151 LEN=332 TOS=0x00 PREC=0x00 TTL=64 ID=16084 PROTO=UDP SPT=1900 DPT=53258 LEN=312 [14477.562013] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=192.168.1.1 DST=192.168.1.151 LEN=332 TOS=0x00 PREC=0x00 TTL=64 ID=16086 PROTO=UDP SPT=1900 DPT=49144 LEN=312 [14512.580955] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=192.168.1.1 DST=192.168.1.151 LEN=332 TOS=0x00 PREC=0x00 TTL=64 ID=16112 PROTO=UDP SPT=1900 DPT=57220 LEN=312 [14512.585987] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=192.168.1.1 DST=192.168.1.151 LEN=332 TOS=0x00 PREC=0x00 TTL=64 ID=16114 PROTO=UDP SPT=1900 DPT=45888 LEN=312 [14526.970042] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=98.200.228.65 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=117 ID=7985 DF PROTO=TCP SPT=3770 DPT=27218 WINDOW=65535 RES=0x00 SYN URGP=0 [14526.976451] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=98.200.228.65 DST=192.168.1.151 LEN=47 TOS=0x00 PREC=0x20 TTL=117 ID=7988 PROTO=UDP SPT=29528 DPT=27218 LEN=27 [14529.955470] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=98.200.228.65 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=117 ID=8018 DF PROTO=TCP SPT=3770 DPT=27218 WINDOW=65535 RES=0x00 SYN URGP=0 [14535.992018] Inbound IN=wlan0 OUT= MAC=00:14:a5:a8:fc:4b:00:18:39:3d:a3:e7:08:00 SRC=98.200.228.65 DST=192.168.1.151 LEN=48 TOS=0x00 PREC=0x20 TTL=117 ID=8079 DF PROTO=TCP SPT=3770 DPT=27218 WINDOW=65535 RES=0x00 SYN URGP=0