[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-46-generic (buildd@orlo) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #79-Ubuntu SMP Tue Mar 10 20:06:50 UTC 2015 (Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-46-generic root=UUID=6fe06780-614a-4a70-b544-ab9a85e90b87 ro acpi_backlight=vendor intel_pstate=enable crashkernel=384M-:128M [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096e3efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000096e3f000-0x0000000096ebefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000096ebf000-0x0000000096fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000096fbf000-0x0000000096ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000096fff000-0x0000000096ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000097000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Packard Bell EasyNote TS11HR/SJV50_HR, BIOS V1.07 03/02/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x15fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 097000000 mask FFF000000 uncachable [ 0.000000] 3 base 098000000 mask FF8000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 140000000 mask FF0000000 write-back [ 0.000000] 7 base 150000000 mask FF0000000 write-back [ 0.000000] 8 base 15FE00000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x97000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x15fc00000-0x15fdfffff] [ 0.000000] [mem 0x15fc00000-0x15fdfffff] page 2M [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15fbfffff] [ 0.000000] [mem 0x15c000000-0x15fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff] [ 0.000000] [mem 0x100000000-0x15bffffff] page 2M [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x96e3efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x96dfffff] page 2M [ 0.000000] [mem 0x96e00000-0x96e3efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x96fff000-0x96ffffff] [ 0.000000] [mem 0x96fff000-0x96ffffff] page 4k [ 0.000000] RAMDISK: [mem 0x35b48000-0x36d9bfff] [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0000000096ffe120 000084 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0000000096ffc000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0000000096ff0000 008EF7 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 0000000096f6d000 000040 [ 0.000000] ACPI: ASF! 0000000096ffd000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0000000096ffb000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0000000096ffa000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0000000096ff9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 0000000096fef000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0000000096fee000 000BC2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 0000000096fec000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 0000000096fe9000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0000000096fe8000 000780 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0000000096fe7000 000996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0000000096fe2000 004F58 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x15fdfffff] [ 0.000000] NODE_DATA [mem 0x15fdf8000-0x15fdfcfff] [ 0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 3947MB) [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015b600000-ffff88015f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x15fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x96e3efff] [ 0.000000] node 0: [mem 0x96fff000-0x96ffffff] [ 0.000000] node 0: [mem 0x100000000-0x15fdfffff] [ 0.000000] On node 0 totalpages: 1010652 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9593 pages used for memmap [ 0.000000] DMA32 zone: 613952 pages, LIFO batch:31 [ 0.000000] Normal zone: 6136 pages used for memmap [ 0.000000] Normal zone: 392704 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x96e3f000-0x96ebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x96ebf000-0x96fbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x96fbf000-0x96ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x97000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88015fa00000 s82368 r8192 d24128 u262144 [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 994703 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-46-generic root=UUID=6fe06780-614a-4a70-b544-ab9a85e90b87 ro acpi_backlight=vendor intel_pstate=enable crashkernel=384M-:128M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3745120K/4042608K available (7384K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 297488K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16252928 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2294.940 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.88 BogoMIPS (lpj=9179760) [ 0.000101] pid_max: default: 32768 minimum: 301 [ 0.000173] Security Framework initialized [ 0.000237] AppArmor: AppArmor initialized [ 0.000284] Yama: becoming mindful. [ 0.000641] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001576] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001995] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002053] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002292] Initializing cgroup subsys memory [ 0.002344] Initializing cgroup subsys devices [ 0.002392] Initializing cgroup subsys freezer [ 0.002440] Initializing cgroup subsys blkio [ 0.002486] Initializing cgroup subsys perf_event [ 0.002535] Initializing cgroup subsys hugetlb [ 0.002602] CPU: Physical Processor ID: 0 [ 0.002649] CPU: Processor Core ID: 0 [ 0.002699] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002699] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002773] mce: CPU supports 7 MCE banks [ 0.002829] CPU0: Thermal monitoring enabled (TM1) [ 0.002886] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.002886] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002886] tlb_flushall_shift: 5 [ 0.003119] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.004747] ACPI: Core revision 20131115 [ 0.010392] ACPI: All ACPI Tables successfully acquired [ 0.047350] ftrace: allocating 28563 entries in 112 pages [ 0.062779] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.102497] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07) [ 0.102653] TSC deadline timer enabled [ 0.102665] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.102878] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.102943] ... version: 3 [ 0.102989] ... bit width: 48 [ 0.103036] ... generic registers: 4 [ 0.103572] ... value mask: 0000ffffffffffff [ 0.103620] ... max period: 0000ffffffffffff [ 0.103668] ... fixed-purpose events: 3 [ 0.103715] ... event mask: 000000070000000f [ 0.105376] x86: Booting SMP configuration: [ 0.118642] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.105423] .... node #0, CPUs: #1 #2 #3 [ 0.145158] x86: Booted up 1 node, 4 CPUs [ 0.145247] smpboot: Total of 4 processors activated (18359.52 BogoMIPS) [ 0.148671] devtmpfs: initialized [ 0.152510] EVM: security.selinux [ 0.152556] EVM: security.SMACK64 [ 0.152601] EVM: security.ima [ 0.152646] EVM: security.capability [ 0.152739] PM: Registering ACPI NVS region [mem 0x96ebf000-0x96fbefff] (1048576 bytes) [ 0.153659] pinctrl core: initialized pinctrl subsystem [ 0.153763] regulator-dummy: no parameters [ 0.153848] RTC time: 18:27:29, date: 03/14/15 [ 0.153925] NET: Registered protocol family 16 [ 0.154072] cpuidle: using governor ladder [ 0.154118] cpuidle: using governor menu [ 0.154203] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.154268] ACPI: bus type PCI registered [ 0.154314] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.154424] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.154491] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.173375] PCI: Using configuration type 1 for base access [ 0.173571] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.173622] mtrr: probably your BIOS does not setup all CPUs. [ 0.173671] mtrr: corrected configuration. [ 0.174442] bio: create slab at 0 [ 0.174628] ACPI: Added _OSI(Module Device) [ 0.174675] ACPI: Added _OSI(Processor Device) [ 0.174723] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.174770] ACPI: Added _OSI(Processor Aggregator Device) [ 0.177644] ACPI: Executed 1 blocks of module-level executable AML code [ 0.185290] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.185949] ACPI: SSDT 0000000096e70718 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.186427] ACPI: Dynamic OEM Table Load: [ 0.186531] ACPI: SSDT (null) 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.189419] ACPI: SSDT 0000000096e71a98 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.189924] ACPI: Dynamic OEM Table Load: [ 0.190028] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.193297] ACPI: SSDT 0000000096e6fd98 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.193770] ACPI: Dynamic OEM Table Load: [ 0.193872] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.209273] ACPI: Interpreter enabled [ 0.209326] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.209450] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.209585] ACPI: (supports S0 S3 S4 S5) [ 0.209632] ACPI: Using IOAPIC for interrupt routing [ 0.209703] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.209907] ACPI: No dock devices found. [ 0.357369] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.357424] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.357520] \_SB_.PCI0:_OSC invalid UUID [ 0.357521] _OSC request data:1 1f 0 [ 0.357525] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.358187] PCI host bridge to bus 0000:00 [ 0.358236] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.358285] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.358335] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.358386] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.358438] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.358496] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.358579] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.358611] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.358651] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.358738] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.358748] pci 0000:00:02.0: reg 0x10: [mem 0xd1400000-0xd17fffff 64bit] [ 0.358754] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.358759] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.358877] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.358911] pci 0000:00:16.0: reg 0x10: [mem 0xd1b04000-0xd1b0400f 64bit] [ 0.359026] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.359126] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.359510] pci 0000:00:1a.0: reg 0x10: [mem 0xd1b0a000-0xd1b0a3ff] [ 0.361700] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.361792] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.361818] pci 0000:00:1b.0: reg 0x10: [mem 0xd1b00000-0xd1b03fff 64bit] [ 0.361941] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.361994] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.362076] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.362203] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.362258] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.362339] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.362466] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.362556] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.362683] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.362738] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.362831] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.363204] pci 0000:00:1d.0: reg 0x10: [mem 0xd1b09000-0xd1b093ff] [ 0.365387] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.365453] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.365537] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.365758] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.365792] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.365806] pci 0000:00:1f.2: reg 0x14: [io 0x309c-0x309f] [ 0.365820] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.365833] pci 0000:00:1f.2: reg 0x1c: [io 0x3098-0x309b] [ 0.365846] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.365860] pci 0000:00:1f.2: reg 0x24: [mem 0xd1b08000-0xd1b087ff] [ 0.365946] pci 0000:00:1f.2: PME# supported from D3hot [ 0.366023] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.366048] pci 0000:00:1f.3: reg 0x10: [mem 0xd1b06000-0xd1b060ff 64bit] [ 0.366086] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f] [ 0.366226] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000 [ 0.366238] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff] [ 0.366251] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.366264] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref] [ 0.366272] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] [ 0.366281] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.366344] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.373353] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.373428] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.373435] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd10fffff] [ 0.373448] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.373599] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000 [ 0.373636] pci 0000:02:00.0: reg 0x10: [mem 0xd1830000-0xd183ffff 64bit pref] [ 0.373665] pci 0000:02:00.0: reg 0x18: [mem 0xd1840000-0xd184ffff 64bit pref] [ 0.373718] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref] [ 0.373821] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.373873] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.373999] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501 [ 0.374036] pci 0000:02:00.1: reg 0x10: [mem 0xd1800000-0xd180ffff 64bit pref] [ 0.374213] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.374325] pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000 [ 0.374362] pci 0000:02:00.2: reg 0x10: [mem 0xd1810000-0xd181ffff 64bit pref] [ 0.374538] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold [ 0.374650] pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000 [ 0.374686] pci 0000:02:00.3: reg 0x10: [mem 0xd1820000-0xd182ffff 64bit pref] [ 0.374861] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold [ 0.381421] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.381497] pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd18fffff 64bit pref] [ 0.381614] pci 0000:03:00.0: [168c:002e] type 00 class 0x028000 [ 0.381648] pci 0000:03:00.0: reg 0x10: [mem 0xd1a00000-0xd1a0ffff 64bit] [ 0.381816] pci 0000:03:00.0: supports D1 [ 0.381818] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.381858] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.389363] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.389442] pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1afffff] [ 0.389608] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.389670] pci 0000:05:00.0: reg 0x10: [mem 0xd1900000-0xd1901fff 64bit] [ 0.389998] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.390069] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.397378] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.397463] pci 0000:00:1c.3: bridge window [mem 0xd1900000-0xd19fffff] [ 0.445740] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.446174] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.446644] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.447146] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.447619] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.448117] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.448549] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.448980] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.449594] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.449703] ACPI: \_SB_.PCI0: notify handler is installed [ 0.449753] Found 1 acpi root devices [ 0.449783] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.449918] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.449967] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.450034] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.450099] vgaarb: loaded [ 0.450144] vgaarb: bridge control possible 0000:01:00.0 [ 0.450192] vgaarb: no bridge control possible 0000:00:02.0 [ 0.450384] SCSI subsystem initialized [ 0.450480] libata version 3.00 loaded. [ 0.450500] ACPI: bus type USB registered [ 0.450560] usbcore: registered new interface driver usbfs [ 0.450615] usbcore: registered new interface driver hub [ 0.450683] usbcore: registered new device driver usb [ 0.450823] PCI: Using ACPI for IRQ routing [ 0.464263] PCI: pci_cache_line_size set to 64 bytes [ 0.464402] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.464404] e820: reserve RAM buffer [mem 0x96e3f000-0x97ffffff] [ 0.464405] e820: reserve RAM buffer [mem 0x97000000-0x97ffffff] [ 0.464407] e820: reserve RAM buffer [mem 0x15fe00000-0x15fffffff] [ 0.464485] NetLabel: Initializing [ 0.464531] NetLabel: domain hash size = 128 [ 0.464578] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.464637] NetLabel: unlabeled traffic allowed by default [ 0.464743] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.465045] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.468131] Switched to clocksource hpet [ 0.472478] AppArmor: AppArmor Filesystem Enabled [ 0.472551] pnp: PnP ACPI init [ 0.472609] ACPI: bus type PNP registered [ 0.472688] pnp 00:00: [dma 4] [ 0.472707] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.472726] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.472816] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.472845] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.472888] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.472939] system 00:04: [io 0xff2c-0xff2f] has been reserved [ 0.472988] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.473039] system 00:04: [io 0xffff] has been reserved [ 0.473087] system 00:04: [io 0xffff] has been reserved [ 0.473137] system 00:04: [io 0x0400-0x047f] could not be reserved [ 0.473188] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.473238] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.473289] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.473314] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.473350] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.473401] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.473433] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.473475] pnp 00:08: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active) [ 0.520316] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.520369] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.520420] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.520472] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.520524] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.520575] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.520626] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.520677] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.520729] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.520781] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.520833] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.521044] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved [ 0.521097] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved [ 0.521149] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.521164] pnp: PnP ACPI: found 11 devices [ 0.521209] ACPI: bus type PNP unregistered [ 0.527446] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.527514] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref] [ 0.527623] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff] [ 0.527675] pci 0000:01:00.0: BAR 6: assigned [mem 0xd1000000-0xd107ffff pref] [ 0.527740] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.527790] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.527841] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd10fffff] [ 0.527894] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.527961] pci 0000:02:00.0: BAR 6: assigned [mem 0xd1850000-0xd18507ff pref] [ 0.528025] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.528079] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff] [ 0.528141] pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd18fffff 64bit pref] [ 0.528212] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.528266] pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1afffff] [ 0.528327] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.528381] pci 0000:00:1c.3: bridge window [mem 0xd1900000-0xd19fffff] [ 0.528442] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.528444] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.528445] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.528447] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.528449] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.528451] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd10fffff] [ 0.528453] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref] [ 0.528455] pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fbfffff] [ 0.528457] pci_bus 0000:02: resource 2 [mem 0xd1800000-0xd18fffff 64bit pref] [ 0.528459] pci_bus 0000:03: resource 1 [mem 0xd1a00000-0xd1afffff] [ 0.528461] pci_bus 0000:05: resource 1 [mem 0xd1900000-0xd19fffff] [ 0.528486] NET: Registered protocol family 2 [ 0.528727] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.528874] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.528990] TCP: Hash tables configured (established 32768 bind 32768) [ 0.529059] TCP: reno registered [ 0.529112] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.529177] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.529773] NET: Registered protocol family 1 [ 0.529832] pci 0000:00:02.0: Video device with shadowed ROM [ 0.570820] PCI: CLS 64 bytes, default 64 [ 0.570868] Trying to unpack rootfs image as initramfs... [ 0.880658] Freeing initrd memory: 18768K (ffff880035b48000 - ffff880036d9c000) [ 0.880728] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.880780] software IO TLB [mem 0x92e3f000-0x96e3f000] (64MB) mapped at [ffff880092e3f000-ffff880096e3efff] [ 0.880922] Simple Boot Flag at 0x44 set to 0x1 [ 0.881141] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14 [ 0.881198] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14 [ 0.881255] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14 [ 0.881312] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14 [ 0.881410] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.881477] Scanning for low memory corruption every 60 seconds [ 0.881792] Initialise system trusted keyring [ 0.881882] audit: initializing netlink socket (disabled) [ 0.881939] type=2000 audit(1426357649.836:1): initialized [ 0.909219] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.910224] zbud: loaded [ 0.910422] VFS: Disk quotas dquot_6.5.2 [ 0.910506] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.910942] fuse init (API version 7.22) [ 0.911055] msgmni has been set to 7351 [ 0.911148] Key type big_key registered [ 0.911622] Key type asymmetric registered [ 0.911670] Asymmetric key parser 'x509' registered [ 0.911743] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.911842] io scheduler noop registered [ 0.911893] io scheduler deadline registered (default) [ 0.911982] io scheduler cfq registered [ 0.912201] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.912561] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.912622] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.912710] intel_idle: MWAIT substates: 0x21120 [ 0.912711] intel_idle: v0.4 model 0x2A [ 0.912712] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.912808] ipmi message handler version 39.2 [ 1.119821] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.327720] ACPI: AC Adapter [ACAD] (on-line) [ 1.327839] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0 [ 1.327910] ACPI: Power Button [PWRB] [ 1.327986] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1 [ 1.328070] ACPI: Lid Switch [LID0] [ 1.328143] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2 [ 1.328213] ACPI: Sleep Button [SLPB] [ 1.328289] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.328354] ACPI: Power Button [PWRF] [ 1.328581] GHES: HEST is not enabled! [ 1.328723] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.687565] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.687638] ACPI: Battery Slot [BAT0] (battery present) [ 1.687778] Linux agpgart interface v0.103 [ 1.689137] brd: module loaded [ 1.689762] loop: module loaded [ 1.690108] libphy: Fixed MDIO Bus: probed [ 1.690227] tun: Universal TUN/TAP device driver, 1.6 [ 1.690275] tun: (C) 1999-2004 Max Krasnyansky [ 1.690371] PPP generic driver version 2.4.2 [ 1.690456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.690509] ehci-pci: EHCI PCI platform driver [ 1.690665] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.690720] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.690800] ehci-pci 0000:00:1a.0: debug port 2 [ 1.694748] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.694765] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd1b0a000 [ 1.703515] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.703600] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.703653] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.703717] usb usb1: Product: EHCI Host Controller [ 1.703766] usb usb1: Manufacturer: Linux 3.13.0-46-generic ehci_hcd [ 1.703817] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.704003] hub 1-0:1.0: USB hub found [ 1.704055] hub 1-0:1.0: 2 ports detected [ 1.704266] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.704318] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.704397] ehci-pci 0000:00:1d.0: debug port 2 [ 1.708353] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.708367] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd1b09000 [ 1.719591] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.719720] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.719773] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.719837] usb usb2: Product: EHCI Host Controller [ 1.719886] usb usb2: Manufacturer: Linux 3.13.0-46-generic ehci_hcd [ 1.719938] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.720174] hub 2-0:1.0: USB hub found [ 1.720232] hub 2-0:1.0: 2 ports detected [ 1.720375] ehci-platform: EHCI generic platform driver [ 1.720432] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.720482] ohci-pci: OHCI PCI platform driver [ 1.720539] ohci-platform: OHCI generic platform driver [ 1.720592] uhci_hcd: USB Universal Host Controller Interface driver [ 1.720738] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.720790] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 [ 1.721086] xhci_hcd 0000:05:00.0: irq 41 for MSI/MSI-X [ 1.721093] xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X [ 1.721098] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X [ 1.721103] xhci_hcd 0000:05:00.0: irq 44 for MSI/MSI-X [ 1.721108] xhci_hcd 0000:05:00.0: irq 45 for MSI/MSI-X [ 1.721250] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.721303] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.721367] usb usb3: Product: xHCI Host Controller [ 1.721416] usb usb3: Manufacturer: Linux 3.13.0-46-generic xhci_hcd [ 1.721467] usb usb3: SerialNumber: 0000:05:00.0 [ 1.721697] hub 3-0:1.0: USB hub found [ 1.721756] hub 3-0:1.0: 2 ports detected [ 1.721878] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.721929] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4 [ 1.724475] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.724527] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.724603] usb usb4: Product: xHCI Host Controller [ 1.724652] usb usb4: Manufacturer: Linux 3.13.0-46-generic xhci_hcd [ 1.724703] usb usb4: SerialNumber: 0000:05:00.0 [ 1.724935] hub 4-0:1.0: USB hub found [ 1.724994] hub 4-0:1.0: 2 ports detected [ 1.731753] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.789390] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.789444] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.789636] mousedev: PS/2 mouse device common for all mice [ 1.789907] rtc_cmos 00:05: RTC can wake from S4 [ 1.790125] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.790213] rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.790341] device-mapper: uevent: version 1.0.3 [ 1.790453] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.790527] Intel P-state driver initializing. [ 1.790587] Intel pstate controlling: cpu 0 [ 1.790650] Intel pstate controlling: cpu 1 [ 1.790714] Intel pstate controlling: cpu 2 [ 1.790767] Intel pstate controlling: cpu 3 [ 1.790835] Consider also installing thermald for improved thermal control. [ 1.790888] ledtrig-cpu: registered to indicate activity on CPUs [ 1.791016] TCP: cubic registered [ 1.791120] NET: Registered protocol family 10 [ 1.791296] NET: Registered protocol family 17 [ 1.791346] Key type dns_resolver registered [ 1.791621] Loading compiled-in X.509 certificates [ 1.792480] Loaded X.509 cert 'Magrathea: Glacier signing key: c7613364bc2aa19d70bf0c6e59bf8acaff65c879' [ 1.792559] registered taskstats version 1 [ 1.794597] Key type trusted registered [ 1.797502] Key type encrypted registered [ 1.797550] AppArmor: AppArmor sha1 policy hashing enabled [ 1.797597] IMA: No TPM chip found, activating TPM-bypass! [ 1.798147] regulator-dummy: disabling [ 1.798259] Magic number: 7:867:493 [ 1.798402] rtc_cmos 00:05: setting system clock to 2015-03-14 18:27:31 UTC (1426357651) [ 1.798534] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.798582] EDD information not available. [ 1.798655] PM: Hibernation image not present or could not be loaded. [ 1.799920] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 1.799982] Write protecting the kernel read-only data: 12288k [ 1.801875] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000) [ 1.803431] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000) [ 1.814794] systemd-udevd[123]: starting version 204 [ 1.855478] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.879445] tsc: Refined TSC clocksource calibration: 2294.783 MHz [ 2.015538] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.147917] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.147987] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.148539] hub 1-1:1.0: USB hub found [ 2.148691] hub 1-1:1.0: 6 ports detected [ 2.243349] pps_core: LinuxPPS API ver. 1 registered [ 2.243407] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.243699] sdhci: Secure Digital Host Controller Interface driver [ 2.244325] sdhci: Copyright(c) Pierre Ossman [ 2.245489] PTP clock support registered [ 2.249661] ahci 0000:00:1f.2: version 3.0 [ 2.249834] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 2.249871] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.250371] tg3.c:v3.134 (Sep 16, 2013) [ 2.259256] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.263255] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 2.263333] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 2.271623] scsi0 : ahci [ 2.271755] scsi1 : ahci [ 2.271872] scsi2 : ahci [ 2.271982] scsi3 : ahci [ 2.272086] scsi4 : ahci [ 2.272185] scsi5 : ahci [ 2.272260] ata1: SATA max UDMA/133 abar m2048@0xd1b08000 port 0xd1b08100 irq 46 [ 2.272321] ata2: DUMMY [ 2.272362] ata3: SATA max UDMA/133 abar m2048@0xd1b08000 port 0xd1b08200 irq 46 [ 2.272420] ata4: DUMMY [ 2.272459] ata5: DUMMY [ 2.272498] ata6: DUMMY [ 2.283212] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 1c:75:08:dd:21:4c [ 2.283292] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.283355] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.283415] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 2.283589] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 2.283852] sdhci-pci 0000:02:00.1: dummy supplies not allowed [ 2.283924] mmc0: no vqmmc regulator found [ 2.283968] sdhci-pci 0000:02:00.1: dummy supplies not allowed [ 2.284024] mmc0: no vmmc regulator found [ 2.284174] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA [ 2.391791] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.391862] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.392377] hub 2-1:1.0: USB hub found [ 2.392561] hub 2-1:1.0: 6 ports detected [ 2.503140] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 2.551095] usb 3-2: New USB device found, idVendor=058f, idProduct=9254 [ 2.551150] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.551201] usb 3-2: Product: Generic USB Hub [ 2.551247] usb 3-2: Manufacturer: ALCOR [ 2.551419] usb 3-2: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [ 2.553109] hub 3-2:1.0: USB hub found [ 2.557164] hub 3-2:1.0: 4 ports detected [ 2.591177] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.596449] ata1.00: ATA-8: WDC WD5000BPVT-22HXZT1, 01.01A01, max UDMA/133 [ 2.596503] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.602017] ata1.00: configured for UDMA/133 [ 2.602339] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 01.0 PQ: 0 ANSI: 5 [ 2.602533] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.602550] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.602701] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.602777] sd 0:0:0:0: [sda] Write Protect is off [ 2.602822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.602834] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.643157] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 2.702788] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 2.703286] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.879119] Switched to clocksource tsc [ 2.899183] usb 1-1.3: New USB device found, idVendor=04fc, idProduct=2800 [ 2.899272] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.899331] usb 1-1.3: Product: 1.3M WebCam [ 2.899373] usb 1-1.3: Manufacturer: 123 [ 2.918951] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.922164] ata3.00: ATAPI: Slimtype DVD A DS8A5SH, XA15, max UDMA/100 [ 2.923509] ata3.00: configured for UDMA/100 [ 2.929672] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A5SH XA15 PQ: 0 ANSI: 5 [ 2.935451] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.935510] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.935730] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.935814] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 3.145740] usb 3-2.3: new low-speed USB device number 3 using xhci_hcd [ 3.191777] usb 3-2.3: New USB device found, idVendor=15ca, idProduct=00c3 [ 3.191830] usb 3-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.191894] usb 3-2.3: Product: USB Optical Mouse [ 3.192012] usb 3-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.196375] hidraw: raw HID events driver (C) Jiri Kosina [ 3.210952] usbcore: registered new interface driver usbhid [ 3.211009] usbhid: USB HID core driver [ 3.212291] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input7 [ 3.212469] hid-generic 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:05:00.0-2.3/input0 [ 3.805949] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f01) [ 3.858267] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a. [ 4.115312] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 4.437120] random: nonblocking pool is initialized [ 6.011218] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 7.891154] init: plymouth-upstart-bridge main process (194) terminated with status 1 [ 7.891228] init: plymouth-upstart-bridge main process ended, respawning [ 7.893127] init: plymouth-upstart-bridge main process (207) terminated with status 1 [ 7.893205] init: plymouth-upstart-bridge main process ended, respawning [ 7.894709] init: plymouth-upstart-bridge main process (209) terminated with status 1 [ 7.894778] init: plymouth-upstart-bridge main process ended, respawning [ 7.896508] init: plymouth-upstart-bridge main process (210) terminated with status 1 [ 7.896585] init: plymouth-upstart-bridge main process ended, respawning [ 7.898326] init: plymouth-upstart-bridge main process (212) terminated with status 1 [ 7.898396] init: plymouth-upstart-bridge main process ended, respawning [ 7.900156] init: plymouth-upstart-bridge main process (213) terminated with status 1 [ 7.900233] init: plymouth-upstart-bridge main process ended, respawning [ 7.901738] init: plymouth-upstart-bridge main process (215) terminated with status 1 [ 7.901804] init: plymouth-upstart-bridge main process ended, respawning [ 7.903514] init: plymouth-upstart-bridge main process (216) terminated with status 1 [ 7.903588] init: plymouth-upstart-bridge main process ended, respawning [ 7.905108] init: plymouth-upstart-bridge main process (218) terminated with status 1 [ 7.905177] init: plymouth-upstart-bridge main process ended, respawning [ 7.906873] init: plymouth-upstart-bridge main process (219) terminated with status 1 [ 7.906943] init: plymouth-upstart-bridge main process ended, respawning [ 34.352195] Adding 10192892k swap on /dev/sda5. Priority:-1 extents:1 across:10192892k FS [ 35.420191] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 35.512165] systemd-udevd[351]: starting version 204 [ 35.796829] wmi: Mapper loaded [ 35.797663] lp: driver loaded but no devices found [ 35.799730] acer_wmi: Acer Laptop ACPI-WMI Extras [ 35.799743] acer_wmi: Function bitmap for Communication Button: 0x1 [ 35.799833] acer_wmi: Disabling ACPI video driver [ 35.800014] input: Acer WMI hotkeys as /devices/virtual/input/input8 [ 35.803437] input: Acer BMA150 accelerometer as /devices/virtual/input/input9 [ 35.805668] ppdev: user-space parallel port driver [ 36.143941] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 36.152995] [drm] Initialized drm 1.1.0 20060810 [ 36.156861] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 36.159207] nvidia: module license 'NVIDIA' taints kernel. [ 36.159211] Disabling lock debugging due to kernel taint [ 36.163694] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 36.168666] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 36.168736] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 36.169803] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 36.169812] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.47 Thu Feb 19 18:56:03 PST 2015 [ 36.188895] cfg80211: Calling CRDA to update world regulatory domain [ 36.262314] device-mapper: multipath: version 1.6.0 loaded [ 36.298055] [drm] Memory usable by graphics device = 2048M [ 36.319885] ath: phy0: ASPM enabled: 0x42 [ 36.319889] ath: EEPROM regdomain: 0x65 [ 36.319890] ath: EEPROM indicates we should expect a direct regpair map [ 36.319893] ath: Country alpha2 being used: 00 [ 36.319894] ath: Regpair used: 0x65 [ 36.329294] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 36.330342] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90010840000, irq=17 [ 36.353718] i915 0000:00:02.0: irq 48 for MSI/MSI-X [ 36.353727] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 36.353728] [drm] Driver supports precise vblank timestamp query. [ 36.381981] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 36.381982] [drm] This can cause pipe underruns and display issues. [ 36.381982] [drm] Please upgrade your BIOS to fix this. [ 36.399343] fbcon: inteldrmfb (fb0) is primary device [ 36.461032] type=1400 audit(1426354086.173:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=487 comm="apparmor_parser" [ 36.461037] type=1400 audit(1426354086.173:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=487 comm="apparmor_parser" [ 36.461040] type=1400 audit(1426354086.173:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=487 comm="apparmor_parser" [ 36.461048] type=1400 audit(1426354086.173:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=549 comm="apparmor_parser" [ 36.461053] type=1400 audit(1426354086.173:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=549 comm="apparmor_parser" [ 36.461055] type=1400 audit(1426354086.173:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=549 comm="apparmor_parser" [ 36.461408] type=1400 audit(1426354086.173:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=487 comm="apparmor_parser" [ 36.461411] type=1400 audit(1426354086.173:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=487 comm="apparmor_parser" [ 36.461419] type=1400 audit(1426354086.173:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=549 comm="apparmor_parser" [ 36.461421] type=1400 audit(1426354086.173:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=549 comm="apparmor_parser" [ 36.542904] Linux video capture interface: v2.00 [ 36.549608] uvcvideo: Found UVC 1.00 device 1.3M WebCam (04fc:2800) [ 36.567141] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10 [ 36.567223] usbcore: registered new interface driver uvcvideo [ 36.567224] USB Video Class driver (1.1.1) [ 36.656808] cfg80211: World regulatory domain updated: [ 36.656809] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 36.656810] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.656811] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.656811] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 36.656812] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.656813] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 37.143679] Console: switching to colour frame buffer device 170x48 [ 37.145933] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 37.145934] i915 0000:00:02.0: registered panic notifier [ 37.146402] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 37.146507] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 37.146613] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20131115/video-1286) [ 37.146801] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 37.146851] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input12 [ 37.147122] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1 [ 37.147259] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 37.147265] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 37.147270] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 37.147274] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251) [ 37.147278] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 37.147280] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 37.147284] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251) [ 37.147287] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 37.147288] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 37.147292] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251) [ 37.147296] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 37.147298] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 37.147574] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 37.165674] SKU: Nid=0x1d sku_cfg=0x4017992d [ 37.165677] SKU: port_connectivity=0x1 [ 37.165679] SKU: enable_pcbeep=0x1 [ 37.165680] SKU: check_sum=0x00000007 [ 37.165682] SKU: customization=0x00000099 [ 37.165683] SKU: external_amp=0x5 [ 37.165684] SKU: platform_type=0x1 [ 37.165685] SKU: swap=0x0 [ 37.165686] SKU: override=0x1 [ 37.166281] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 37.166284] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 37.166286] hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 37.166287] mono: mono_out=0x0 [ 37.166288] inputs: [ 37.166290] Internal Mic=0x1b [ 37.166292] Mic=0x18 [ 37.166294] realtek: No valid SSID, checking pincfg 0x4017992d for NID 0x1d [ 37.166296] realtek: Enabling init ASM_ID=0x992d CODEC_ID=10ec0269 [ 37.181636] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 37.181712] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 37.181791] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 37.599276] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 37.780479] init: Failed to spawn smbd main process: unable to execute: No such file or directory [ 37.782373] init: Failed to spawn samba-ad-dc main process: unable to execute: No such file or directory [ 37.840497] init: failsafe main process (789) killed by TERM signal [ 37.841260] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 38.085514] init: Failed to spawn ofono main process: unable to execute: No such file or directory [ 38.222093] Bluetooth: Core ver 2.17 [ 38.222127] NET: Registered protocol family 31 [ 38.222129] Bluetooth: HCI device and connection manager initialized [ 38.222138] Bluetooth: HCI socket layer initialized [ 38.222142] Bluetooth: L2CAP socket layer initialized [ 38.222147] Bluetooth: SCO socket layer initialized [ 38.225463] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 38.225466] Bluetooth: BNEP filters: protocol multicast [ 38.225475] Bluetooth: BNEP socket layer initialized [ 38.228381] Bluetooth: RFCOMM TTY layer initialized [ 38.228393] Bluetooth: RFCOMM socket layer initialized [ 38.228399] Bluetooth: RFCOMM ver 1.11 [ 38.435291] init: cups main process (882) killed by HUP signal [ 38.435300] init: cups main process ended, respawning [ 39.072371] tg3 0000:02:00.0: irq 50 for MSI/MSI-X [ 39.072379] tg3 0000:02:00.0: irq 51 for MSI/MSI-X [ 39.072383] tg3 0000:02:00.0: irq 52 for MSI/MSI-X [ 39.072388] tg3 0000:02:00.0: irq 53 for MSI/MSI-X [ 39.072392] tg3 0000:02:00.0: irq 54 for MSI/MSI-X [ 39.537373] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 39.537680] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 39.557864] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 39.560895] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 40.577064] ip_tables: (C) 2000-2006 Netfilter Core Team [ 40.591701] Bridge firewalling registered [ 40.612748] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 40.672289] wlan0: authenticate with 08:86:3b:7d:01:0e [ 40.692001] wlan0: send auth to 08:86:3b:7d:01:0e (try 1/3) [ 40.693950] wlan0: authenticated [ 40.695439] wlan0: associate with 08:86:3b:7d:01:0e (try 1/3) [ 40.712027] wlan0: RX AssocResp from 08:86:3b:7d:01:0e (capab=0x11 status=0 aid=2) [ 40.712069] wlan0: associated [ 40.712077] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 40.712183] cfg80211: Calling CRDA for country: US [ 40.714376] ath: EEPROM regdomain: 0x8348 [ 40.714379] ath: EEPROM indicates we should expect a country code [ 40.714381] ath: doing EEPROM country->regdmn map search [ 40.714382] ath: country maps to regdmn code: 0x3a [ 40.714384] ath: Country alpha2 being used: US [ 40.714385] ath: Regpair used: 0x3a [ 40.714386] ath: regdomain 0x8348 dynamically updated by country IE [ 40.714422] cfg80211: Regulatory domain changed to country: US [ 40.714423] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 40.714425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 40.714427] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 40.714428] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 40.714430] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 40.714431] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 40.714432] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 40.714434] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 42.476080] nvidia 0000:01:00.0: irq 55 for MSI/MSI-X [ 42.487059] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 42.487165] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 42.487216] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 42.487298] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 42.487344] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 42.487388] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 42.487496] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 42.487542] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 43.421238] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 43.736597] IPv6: wlan0: IPv6 duplicate address fe80::1e65:9dff:feba:c8a1 detected! [ 43.993196] nvidia 0000:01:00.0: irq 55 for MSI/MSI-X [ 44.002014] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 44.002092] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 44.002131] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 44.002197] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 44.002235] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 44.002270] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 44.002357] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 44.002393] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 44.003319] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 45.119150] bbswitch: version 0.7 [ 45.119168] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 45.119179] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 45.119203] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 45.119366] bbswitch: detected an Optimus _DSM function [ 45.119386] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 45.134470] [drm] Module unloaded [ 45.143429] bbswitch: disabling discrete graphics [ 45.143464] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 45.157181] pci_raw_set_power_state: 231 callbacks suppressed [ 45.157199] pci 0000:01:00.0: Refused to change power state, currently in D0 [ 47.589478] init: plymouth-upstart-bridge main process ended, respawning [ 47.618793] vboxdrv: Found 4 processor cores. [ 47.619271] vboxdrv: fAsync=0 offMin=0x27b offMax=0x18b9 [ 47.619455] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 47.619461] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). [ 47.655556] vboxpci: IOMMU not found (not registered) [ 48.001215] init: Failed to spawn nmbd main process: unable to execute: No such file or directory [ 48.197025] init: plymouth-stop pre-start process (2199) terminated with status 1 [ 55.126821] init: Failed to spawn nvidia-persistenced main process: unable to execute: No such file or directory [ 68.343766] type=1400 audit(1426354118.078:89): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3602 comm="apparmor_parser" [ 68.343789] type=1400 audit(1426354118.078:90): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3602 comm="apparmor_parser" [ 68.345181] type=1400 audit(1426354118.082:91): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3602 comm="apparmor_parser"