[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-33-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #71-Ubuntu SMP Wed Jul 20 17:30:40 UTC 2011 (Ubuntu 2.6.32-33.71-generic 2.6.32.41+drm33.18) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) [ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data) [ 0.000000] BIOS-e820: 0000000030000000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x2fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002fff0000 (usable) [ 0.000000] modified: 000000002fff0000 - 000000002fff3000 (ACPI NVS) [ 0.000000] modified: 000000002fff3000 - 0000000030000000 (ACPI data) [ 0.000000] modified: 0000000030000000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000002fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002fc00000 page 2M [ 0.000000] 002fc00000 - 002fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 2fff0000 @ 10000-15000 [ 0.000000] RAMDISK: 2f83e000 - 2ffdff65 [ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS) [ 0.000000] ACPI: RSDT 2fff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 2fff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 2fff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 2fff0000 00040 [ 0.000000] ACPI: SSDT 2fff95c0 000F4 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 2fff9700 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098) [ 0.000000] ACPI: SLIC 2fff9780 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001) [ 0.000000] ACPI: MCFG 2fff9940 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 2fff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 767MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2fff0000 [ 0.000000] low ram: 0 - 2fff0000 [ 0.000000] node 0 low ram: 00000000 - 2fff0000 [ 0.000000] node 0 bootmap 00011000 - 00017000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e0ef8] TEXT DATA BSS ==> [0000100000 - 00008e0ef8] [ 0.000000] #4 [002f83e000 - 002ffdff65] RAMDISK ==> [002f83e000 - 002ffdff65] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008e1000 - 00008e40e9] BRK ==> [00008e1000 - 00008e40e9] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000] [ 0.000000] found SMP MP-table at [c00f3c90] f3c90 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002fff0 [ 0.000000] HighMem 0x0002fff0 -> 0x0002fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002fff0 [ 0.000000] On node 0 totalpages: 196479 [ 0.000000] free_area_init_node: node 0, pgdat c079a7c0, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1504 pages used for memmap [ 0.000000] Normal zone: 190992 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36312 r0 d21032 u2097152 [ 0.000000] pcpu-alloc: s36312 r0 d21032 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194943 [ 0.000000] Kernel command line: root=UUID=02998421-74de-4eb2-81d3-1c42a0c7e0a9 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3931520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 758676k/786368k available (4675k kernel code, 26832k reserved, 2127k data, 668k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf07f0000 - 0xff7fe000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084c000 ( 668 kB) [ 0.000000] .data : 0xc0590dc7 - 0xc07a4d88 (2127 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590dc7 (4675 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2009.127 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.25 BogoMIPS (lpj=8036508) [ 0.004023] Security Framework initialized [ 0.004042] AppArmor: AppArmor initialized [ 0.004050] Mount-cache hash table entries: 512 [ 0.004174] Initializing cgroup subsys ns [ 0.004178] Initializing cgroup subsys cpuacct [ 0.004183] Initializing cgroup subsys memory [ 0.004190] Initializing cgroup subsys devices [ 0.004192] Initializing cgroup subsys freezer [ 0.004195] Initializing cgroup subsys net_cls [ 0.004214] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004217] CPU: L2 Cache: 128K (64 bytes/line) [ 0.004221] mce: CPU supports 5 MCE banks [ 0.004234] using C1E aware idle routine [ 0.004241] Performance Events: AMD PMU driver. [ 0.004249] ... version: 0 [ 0.004251] ... bit width: 48 [ 0.004253] ... generic registers: 4 [ 0.004255] ... value mask: 0000ffffffffffff [ 0.004257] ... max period: 00007fffffffffff [ 0.004259] ... fixed-purpose events: 0 [ 0.004261] ... event mask: 000000000000000f [ 0.004265] Checking 'hlt' instruction... OK. [ 0.020640] SMP alternatives: switching to UP code [ 0.026599] ACPI: Core revision 20090903 [ 0.037551] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.037557] ftrace: allocating 21725 entries in 43 pages [ 0.040099] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044450] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084148] CPU0: AMD Sempron(tm) Processor 3500+ stepping 02 [ 0.088001] Brought up 1 CPUs [ 0.088001] Total of 1 processors activated (4018.25 BogoMIPS). [ 0.088001] CPU0 attaching NULL sched-domain. [ 0.088001] devtmpfs: initialized [ 0.088001] regulator: core version 0.5 [ 0.088001] Time: 11:36:55 Date: 08/03/11 [ 0.088001] NET: Registered protocol family 16 [ 0.088001] EISA bus registered [ 0.088001] ACPI: bus type pci registered [ 0.088001] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.088001] PCI: MCFG area at f0000000 reserved in E820 [ 0.088001] PCI: Using MMCONFIG for extended config space [ 0.088001] PCI: Using configuration type 1 for base access [ 0.088001] bio: create slab at 0 [ 0.088001] ACPI: EC: Look up EC in DSDT [ 0.094769] ACPI: Interpreter enabled [ 0.094775] ACPI: (supports S0 S3 S4 S5) [ 0.094800] ACPI: Using IOAPIC for interrupt routing [ 0.104430] ACPI: No dock devices found. [ 0.105487] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.105705] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f] [ 0.105717] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.105722] pci 0000:00:01.1: reg 24 io port: [0xf400-0xf43f] [ 0.105741] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.105747] pci 0000:00:01.1: PME# disabled [ 0.105796] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.105819] pci 0000:00:02.0: supports D1 D2 [ 0.105821] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.105824] pci 0000:00:02.0: PME# disabled [ 0.105847] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.105875] pci 0000:00:02.1: supports D1 D2 [ 0.105877] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.105880] pci 0000:00:02.1: PME# disabled [ 0.105945] pci 0000:00:05.0: reg 10 32bit mmio: [0xfe028000-0xfe02bfff] [ 0.105972] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.105975] pci 0000:00:05.0: PME# disabled [ 0.106009] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 0.106043] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7] [ 0.106047] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3] [ 0.106051] pci 0000:00:08.0: reg 18 io port: [0x970-0x977] [ 0.106055] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73] [ 0.106059] pci 0000:00:08.0: reg 20 io port: [0xdc00-0xdc0f] [ 0.106064] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.106118] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.106121] pci 0000:00:09.0: PME# disabled [ 0.106157] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.106160] pci 0000:00:0b.0: PME# disabled [ 0.106197] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.106200] pci 0000:00:0c.0: PME# disabled [ 0.106221] pci 0000:00:0d.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.106227] pci 0000:00:0d.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.106233] pci 0000:00:0d.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff] [ 0.106238] pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.106352] pci 0000:01:09.0: reg 10 32bit mmio: [0xfd8ff000-0xfd8ff7ff] [ 0.106359] pci 0000:01:09.0: reg 14 32bit mmio: [0xfd8f8000-0xfd8fbfff] [ 0.106390] pci 0000:01:09.0: supports D1 D2 [ 0.106393] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot [ 0.106396] pci 0000:01:09.0: PME# disabled [ 0.106421] pci 0000:00:04.0: transparent bridge [ 0.106424] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff] [ 0.106428] pci 0000:00:04.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.106431] pci 0000:00:04.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.106466] pci 0000:00:09.0: bridge io port: [0xb000-0xbfff] [ 0.106470] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.106474] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.106515] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdcfc000-0xfdcfffff] [ 0.106521] pci 0000:03:00.0: reg 18 io port: [0xac00-0xacff] [ 0.106539] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.106565] pci 0000:03:00.0: supports D1 D2 [ 0.106568] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.106572] pci 0000:03:00.0: PME# disabled [ 0.106609] pci 0000:00:0b.0: bridge io port: [0xa000-0xafff] [ 0.106612] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.106616] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.106651] pci 0000:00:0c.0: bridge io port: [0x9000-0x9fff] [ 0.106654] pci 0000:00:0c.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.106658] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.106667] pci_bus 0000:00: on NUMA node 0 [ 0.106673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.106887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.179290] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179444] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179594] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179746] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 0.179895] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.180057] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) [ 0.180207] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.180356] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.180508] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 0.180657] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.180811] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.180961] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.181112] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.181261] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.181413] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.181571] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 0.181725] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.181877] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.182032] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.182235] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.182428] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.182620] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.182812] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.183003] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.183196] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.183387] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.183579] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.183772] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.183965] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.184171] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 0.184364] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.184558] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.184752] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.184945] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.185138] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.185332] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.185526] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.185719] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 0.185862] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.185868] vgaarb: loaded [ 0.185984] SCSI subsystem initialized [ 0.186063] libata version 3.00 loaded. [ 0.186136] usbcore: registered new interface driver usbfs [ 0.186147] usbcore: registered new interface driver hub [ 0.186171] usbcore: registered new device driver usb [ 0.186310] ACPI: WMI: Mapper loaded [ 0.186312] PCI: Using ACPI for IRQ routing [ 0.186459] NetLabel: Initializing [ 0.186461] NetLabel: domain hash size = 128 [ 0.186463] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.186476] NetLabel: unlabeled traffic allowed by default [ 0.186517] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.186524] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.186529] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.192037] Switching to clocksource hpet [ 0.193788] AppArmor: AppArmor Filesystem Enabled [ 0.193810] pnp: PnP ACPI init [ 0.193830] ACPI: bus type pnp registered [ 0.200179] pnp: PnP ACPI: found 13 devices [ 0.200182] ACPI: ACPI bus type pnp unregistered [ 0.200186] PnPBIOS: Disabled by ACPI PNP [ 0.200199] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.200202] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.200205] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.200208] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.200211] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.200215] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.200219] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 0.200222] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 0.200226] system 00:01: iomem range 0x30000000-0x3fffffff has been reserved [ 0.200232] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.200235] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.200238] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.200246] system 00:0b: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.200251] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved [ 0.200255] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.200258] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.200261] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.200265] system 00:0c: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 0.200268] system 00:0c: iomem range 0x2fff0000-0x2fffffff could not be reserved [ 0.200271] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.200275] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.200278] system 00:0c: iomem range 0x100000-0x2ffeffff could not be reserved [ 0.200281] system 00:0c: iomem range 0x30000000-0x3fffffff has been reserved [ 0.200285] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.200288] system 00:0c: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.200291] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.200295] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.200298] system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.200301] system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.235010] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.235013] pci 0000:00:04.0: IO window: 0xc000-0xcfff [ 0.235017] pci 0000:00:04.0: MEM window: 0xfd800000-0xfd8fffff [ 0.235021] pci 0000:00:04.0: PREFETCH window: 0xfdf00000-0xfdffffff [ 0.235026] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.235029] pci 0000:00:09.0: IO window: 0xb000-0xbfff [ 0.235032] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff [ 0.235035] pci 0000:00:09.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.235040] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.235043] pci 0000:00:0b.0: IO window: 0xa000-0xafff [ 0.235046] pci 0000:00:0b.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.235049] pci 0000:00:0b.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.235053] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.235056] pci 0000:00:0c.0: IO window: 0x9000-0x9fff [ 0.235059] pci 0000:00:0c.0: MEM window: 0xfda00000-0xfdafffff [ 0.235062] pci 0000:00:0c.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.235072] pci 0000:00:04.0: setting latency timer to 64 [ 0.235077] pci 0000:00:09.0: setting latency timer to 64 [ 0.235082] pci 0000:00:0b.0: setting latency timer to 64 [ 0.235087] pci 0000:00:0c.0: setting latency timer to 64 [ 0.235092] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.235094] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.235097] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.235100] pci_bus 0000:01: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.235103] pci_bus 0000:01: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.235106] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.235108] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.235111] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 0.235114] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.235117] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.235120] pci_bus 0000:03: resource 0 io: [0xa000-0xafff] [ 0.235123] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.235125] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.235128] pci_bus 0000:04: resource 0 io: [0x9000-0x9fff] [ 0.235131] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.235134] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.235171] NET: Registered protocol family 2 [ 0.235264] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.235604] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.236490] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.236947] TCP: Hash tables configured (established 131072 bind 65536) [ 0.236951] TCP reno registered [ 0.237051] NET: Registered protocol family 1 [ 0.252077] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.252126] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.252182] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.252239] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.252300] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.252366] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.252372] pci 0000:00:0d.0: Boot video device [ 0.252563] cpufreq-nforce2: No nForce2 chipset. [ 0.252588] Scanning for low memory corruption every 60 seconds [ 0.252697] audit: initializing netlink socket (disabled) [ 0.252710] type=2000 audit(1312371414.252:1): initialized [ 0.262822] Trying to unpack rootfs image as initramfs... [ 0.276442] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.277905] VFS: Disk quotas dquot_6.5.2 [ 0.277969] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.278548] fuse init (API version 7.13) [ 0.278634] msgmni has been set to 1482 [ 0.284284] alg: No test for stdrng (krng) [ 0.284371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.284375] io scheduler noop registered [ 0.284377] io scheduler anticipatory registered [ 0.284379] io scheduler deadline registered [ 0.284422] io scheduler cfq registered (default) [ 0.284547] alloc irq_desc for 24 on node -1 [ 0.284550] alloc kstat_irqs on node -1 [ 0.284558] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X [ 0.284564] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.284636] alloc irq_desc for 25 on node -1 [ 0.284638] alloc kstat_irqs on node -1 [ 0.284643] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X [ 0.284647] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.284713] alloc irq_desc for 26 on node -1 [ 0.284715] alloc kstat_irqs on node -1 [ 0.284720] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X [ 0.284724] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.284775] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.284799] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.284898] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.284902] ACPI: Power Button [PWRB] [ 0.284964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.284967] ACPI: Power Button [PWRF] [ 0.285016] fan PNP0C0B:00: registered as cooling_device0 [ 0.285022] ACPI: Fan [FAN] (on) [ 0.285465] processor LNXCPU:00: registered as cooling_device1 [ 0.290901] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.290911] ACPI: Thermal Zone [THRM] (40 C) [ 0.296362] isapnp: Scanning for PnP cards... [ 0.303367] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.303470] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.303591] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.303867] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.303989] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.305040] brd: module loaded [ 0.305497] loop: module loaded [ 0.305609] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.305802] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.306214] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.306220] alloc irq_desc for 23 on node -1 [ 0.306222] alloc kstat_irqs on node -1 [ 0.306233] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.306253] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.306261] pata_acpi 0000:00:08.0: PCI INT A disabled [ 0.306576] Fixed MDIO Bus: probed [ 0.306610] PPP generic driver version 2.4.2 [ 0.306673] tun: Universal TUN/TAP device driver, 1.6 [ 0.306675] tun: (C) 1999-2004 Max Krasnyansky [ 0.306762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.307157] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.307162] alloc irq_desc for 22 on node -1 [ 0.307164] alloc kstat_irqs on node -1 [ 0.307175] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.307194] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.307197] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.307246] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.307277] ehci_hcd 0000:00:02.1: debug port 1 [ 0.307285] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.307307] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 0.355637] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.355782] usb usb1: configuration #1 chosen from 1 choice [ 0.355812] hub 1-0:1.0: USB hub found [ 0.355822] hub 1-0:1.0: 8 ports detected [ 0.355888] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.356322] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.356328] alloc irq_desc for 21 on node -1 [ 0.356330] alloc kstat_irqs on node -1 [ 0.356341] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 [ 0.356361] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.356364] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.356440] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.356472] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 [ 0.445855] usb usb2: configuration #1 chosen from 1 choice [ 0.445886] hub 2-0:1.0: USB hub found [ 0.445897] hub 2-0:1.0: 8 ports detected [ 0.445963] uhci_hcd: USB Universal Host Controller Interface driver [ 0.446060] PNP: No PS/2 controller found. Probing ports directly. [ 0.452274] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.452283] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.452447] mice: PS/2 mouse device common for all mice [ 0.452581] rtc_cmos 00:05: RTC can wake from S4 [ 0.452624] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.452665] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.452783] device-mapper: uevent: version 1.0.3 [ 0.452919] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.452979] device-mapper: multipath: version 1.1.0 loaded [ 0.452982] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.453111] EISA: Probing bus 0 at eisa.0 [ 0.453118] Cannot allocate resource for EISA slot 1 [ 0.453137] EISA: Detected 0 cards. [ 0.456323] cpuidle: using governor ladder [ 0.456327] cpuidle: using governor menu [ 0.456749] TCP cubic registered [ 0.456904] NET: Registered protocol family 10 [ 0.457626] NET: Registered protocol family 17 [ 0.457666] powernow-k8: Found 1 AMD Sempron(tm) Processor 3500+ processors (1 cpu cores) (version 2.20.00) [ 0.457719] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 [ 0.457722] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 [ 0.457724] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 0.457766] Using IPI No-Shortcut mode [ 0.457858] PM: Resume from disk failed. [ 0.457870] registered taskstats version 1 [ 0.458135] Magic number: 7:981:629 [ 0.458242] rtc_cmos 00:05: setting system clock to 2011-08-03 11:36:55 UTC (1312371415) [ 0.458245] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.458247] EDD information not available. [ 0.729392] Freeing initrd memory: 7815k freed [ 0.865746] isapnp: No Plug & Play device found [ 0.865786] Freeing unused kernel memory: 668k freed [ 0.866351] Write protecting the kernel text: 4676k [ 0.866382] Write protecting the kernel read-only data: 1848k [ 0.889722] udev: starting version 151 [ 1.133035] pata_amd 0000:00:06.0: version 0.4.1 [ 1.133085] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.145877] scsi0 : pata_amd [ 1.157999] scsi1 : pata_amd [ 1.158770] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.158774] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.158936] sata_nv 0000:00:08.0: version 3.5 [ 1.158949] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.159001] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.159399] scsi2 : sata_nv [ 1.159579] scsi3 : sata_nv [ 1.159796] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 [ 1.159800] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 [ 1.163812] sky2 driver version 1.25 [ 1.164259] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 1.164266] alloc irq_desc for 16 on node -1 [ 1.164268] alloc kstat_irqs on node -1 [ 1.164279] sky2 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 1.164291] sky2 0000:03:00.0: setting latency timer to 64 [ 1.164324] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2 [ 1.164382] alloc irq_desc for 27 on node -1 [ 1.164384] alloc kstat_irqs on node -1 [ 1.164394] sky2 0000:03:00.0: irq 27 for MSI/MSI-X [ 1.165296] sky2 eth0: addr 00:19:21:e5:40:6a [ 1.320439] ata1.00: ATAPI: HL-DT-STDVD+-RW GSA-H21N, 1.01, max UDMA/33 [ 1.320468] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) [ 1.336371] ata1.00: configured for UDMA/33 [ 1.339165] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H21N 1.01 PQ: 0 ANSI: 5 [ 1.344524] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.344529] Uniform CD-ROM driver Revision: 3.20 [ 1.344656] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.344727] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.344825] ata2: port disabled. ignoring. [ 1.396022] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 1.619846] usb 2-2: configuration #1 chosen from 1 choice [ 1.630523] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.639374] ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OA70A, max UDMA/133 [ 1.639379] ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.640246] usbcore: registered new interface driver hiddev [ 1.646153] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input3 [ 1.646345] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input0 [ 1.652350] ata3.00: configured for UDMA/133 [ 1.652472] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 1.652652] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.652979] sd 2:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB) [ 1.653026] sd 2:0:0:0: [sda] Write Protect is off [ 1.653030] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.653054] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.653216] sda: [ 1.656725] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input4 [ 1.656994] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input1 [ 1.673598] sda1 sda2 < [ 1.685102] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.2/input/input5 [ 1.685156] sda5 [ 1.685724] generic-usb 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:02.0-2/input2 [ 1.685766] usbcore: registered new interface driver usbhid [ 1.685887] usbhid: v2.6:USB HID core driver [ 1.698205] sda6 sda7 sda8 sda9 sda10 > sda3 [ 1.764269] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.924017] usb 2-3: new full speed USB device using ohci_hcd and address 3 [ 1.974286] ata4: SATA link down (SStatus 0 SControl 300) [ 1.983334] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 1.983343] alloc irq_desc for 19 on node -1 [ 1.983346] alloc kstat_irqs on node -1 [ 1.983357] ohci1394 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 1.983363] ohci1394 0000:01:09.0: setting latency timer to 64 [ 2.036060] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fd8ff000-fd8ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.127866] usb 2-3: configuration #1 chosen from 1 choice [ 2.432029] usb 2-4: new full speed USB device using ohci_hcd and address 4 [ 2.608346] kjournald starting. Commit interval 5 seconds [ 2.608361] EXT3-fs: mounted filesystem with ordered data mode. [ 2.656849] usb 2-4: configuration #1 chosen from 1 choice [ 2.960027] usb 2-8: new full speed USB device using ohci_hcd and address 5 [ 3.175857] usb 2-8: configuration #1 chosen from 1 choice [ 3.308137] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00001921ff1864af] [ 31.075053] Adding 2273156k swap on /dev/sda10. Priority:-1 extents:1 across:2273156k [ 31.605788] EXT3 FS on sda3, internal journal [ 31.875440] udev: starting version 151 [ 33.870312] type=1505 audit(1312371448.909:2): operation="profile_load" pid=535 name="/sbin/dhclient3" [ 33.870620] type=1505 audit(1312371448.909:3): operation="profile_load" pid=535 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 33.870791] type=1505 audit(1312371448.909:4): operation="profile_load" pid=535 name="/usr/lib/connman/scripts/dhclient-script" [ 33.871177] type=1505 audit(1312371448.909:5): operation="profile_replace" pid=533 name="/sbin/dhclient3" [ 33.871491] type=1505 audit(1312371448.909:6): operation="profile_replace" pid=533 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 33.871670] type=1505 audit(1312371448.909:7): operation="profile_replace" pid=533 name="/usr/lib/connman/scripts/dhclient-script" [ 34.129442] acer-wmi: Acer Laptop ACPI-WMI Extras [ 34.129455] acer-wmi: No or unsupported WMI interface, unable to load [ 34.164101] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11 [ 34.164192] usbcore: registered new interface driver usblp [ 34.218488] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 34.220323] lp: driver loaded but no devices found [ 34.243164] Linux video capture interface: v2.00 [ 34.361646] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 34.361809] i2c i2c-1: nForce2 SMBus adapter at 0xf400 [ 34.478672] gspca: main v2.7.0 registered [ 34.487620] parport_pc 00:0a: reported by Plug and Play ACPI [ 34.487667] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 34.501864] Initializing USB Mass Storage driver... [ 34.505481] scsi4 : SCSI emulation for USB Mass Storage devices [ 34.507276] usbcore: registered new interface driver usb-storage [ 34.507281] USB Mass Storage support registered. [ 34.510861] usb-storage: device found at 5 [ 34.510865] usb-storage: waiting for device to settle before scanning [ 34.534963] gspca: probing 046d:08d7 [ 34.580209] lp0: using parport0 (interrupt-driven). [ 34.660673] ppdev: user-space parallel port driver [ 34.667783] vga16fb: initializing [ 34.667791] vga16fb: mapped to 0xc00a0000 [ 34.667967] fb0: VGA16 VGA frame buffer device [ 34.718999] it87: Found IT8726F chip at 0x290, revision 1 [ 34.719113] ACPI: resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296] [ 34.719116] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 34.729670] it87: Found IT8726F chip at 0x290, revision 1 [ 34.729801] ACPI: resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296] [ 34.729804] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 34.750629] it87: Found IT8726F chip at 0x290, revision 1 [ 34.750733] ACPI: resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296] [ 34.750736] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 35.170920] Linux agpgart interface v0.103 [ 35.455603] Console: switching to colour frame buffer device 80x30 [ 35.905760] nvidia: module license 'NVIDIA' taints kernel. [ 35.905765] Disabling lock debugging due to kernel taint [ 37.276958] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 20 [ 37.276966] alloc irq_desc for 20 on node -1 [ 37.276969] alloc kstat_irqs on node -1 [ 37.276980] nvidia 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 20 (level, low) -> IRQ 20 [ 37.276988] nvidia 0000:00:0d.0: setting latency timer to 64 [ 37.276993] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 37.278321] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010 [ 37.379750] zc3xx: probe 2wr ov vga 0x0000 [ 37.451750] zc3xx: probe sensor -> 0011 [ 37.451754] zc3xx: Find Sensor HV7131R(c) [ 37.463833] gspca: probe ok [ 37.463850] gspca: probing 046d:08d7 [ 37.463862] gspca: probing 046d:08d7 [ 37.463887] usbcore: registered new interface driver zc3xx [ 37.463890] zc3xx: registered [ 38.077118] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 38.077126] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 38.077131] hda_intel: Disable MSI for Nvidia chipset [ 38.077171] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 38.096538] sky2 eth0: enabling interface [ 38.097197] usbcore: registered new interface driver snd-usb-audio [ 38.107642] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 39.116027] hda_codec: ALC888: BIOS auto-probing. [ 39.428115] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input6 [ 39.509799] usb-storage: device scan complete [ 39.519796] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 39.526781] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 39.534943] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 39.540793] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 39.543622] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 39.545256] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 39.552557] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 39.553943] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 39.627534] type=1505 audit(1312371454.665:8): operation="profile_load" pid=946 name="/usr/share/gdm/guest-session/Xsession" [ 39.631840] type=1505 audit(1312371454.669:9): operation="profile_replace" pid=968 name="/sbin/dhclient3" [ 39.632420] type=1505 audit(1312371454.673:10): operation="profile_replace" pid=968 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 39.632607] type=1505 audit(1312371454.673:11): operation="profile_replace" pid=968 name="/usr/lib/connman/scripts/dhclient-script" [ 39.779800] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 39.780296] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 39.816774] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 39.827765] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 39.838778] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 39.849771] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 40.078640] type=1505 audit(1312371455.117:12): operation="profile_load" pid=969 name="/usr/bin/evince" [ 40.082829] type=1505 audit(1312371455.121:13): operation="profile_load" pid=969 name="/usr/bin/evince-previewer" [ 40.085609] type=1505 audit(1312371455.125:14): operation="profile_load" pid=969 name="/usr/bin/evince-thumbnailer" [ 40.469960] type=1505 audit(1312371455.511:15): operation="profile_load" pid=1024 name="/usr/lib/cups/backend/cups-pdf" [ 40.470349] type=1505 audit(1312371455.511:16): operation="profile_load" pid=1024 name="/usr/sbin/cupsd" [ 40.688893] type=1505 audit(1312371455.729:17): operation="profile_load" pid=1028 name="/usr/sbin/mysqld" [ 42.560532] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 42.560536] apm: overridden by ACPI. [ 49.992017] eth0: no IPv6 routers present [ 127.728039] device eth0 entered promiscuous mode [ 127.730278] device eth0 left promiscuous mode [ 127.733369] device eth0 entered promiscuous mode [ 133.623088] usb 2-4: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 208.004023] Clocksource tsc unstable (delta = -250008637 ns) [ 1278.031178] device eth0 left promiscuous mode [ 1282.332620] device eth0 entered promiscuous mode [ 1282.335413] device eth0 left promiscuous mode [ 1282.339976] device eth0 entered promiscuous mode