[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-30-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #59-Ubuntu SMP Tue Mar 1 21:30:21 UTC 2011 (Ubuntu 2.6.32-30.59-generic 2.6.32.29+drm33.13) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005f6d0000 (usable) [ 0.000000] BIOS-e820: 000000005f6d0000 - 000000005f6e2000 (ACPI data) [ 0.000000] BIOS-e820: 000000005f6e2000 - 000000005f6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005f6e3000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x5f6d0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 0C0000000 write-back [ 0.000000] 1 base 040000000 mask 0E0000000 write-back [ 0.000000] 2 base 05F700000 mask 0FFF00000 uncachable [ 0.000000] 3 base 05F800000 mask 0FF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000005f6d0000 (usable) [ 0.000000] modified: 000000005f6d0000 - 000000005f6e2000 (ACPI data) [ 0.000000] modified: 000000005f6e2000 - 000000005f6e3000 (ACPI NVS) [ 0.000000] modified: 000000005f6e3000 - 0000000060000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 8e6000-9c7000 [ 0.000000] RAMDISK: 37858000 - 37fefe2f [ 0.000000] Allocated new RAMDISK: 009c1000 - 01158e2f [ 0.000000] Move RAMDISK from 0000000037858000 - 0000000037fefe2e to 009c1000 - 01158e2e [ 0.000000] ACPI: RSDP 000f7a60 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 5f6dac38 00084 (v01 LENOVO CB-01 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 5f6e1bd7 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 5f6dbe3a 05D29 (v01 INTEL CALISTGA 06040000 INTL 20061109) [ 0.000000] ACPI: FACS 5f6e2fc0 00040 [ 0.000000] ACPI: HPET 5f6e1ccb 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 5f6e1d03 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 5f6e1d3f 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001) [ 0.000000] ACPI: TMOR 5f6e1d71 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: APIC 5f6e1d97 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 5f6e1dff 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 5f6e1e27 00176 (v01 LENOVO CB-01 06040000 LTP 00000000) [ 0.000000] ACPI: ASF! 5f6e1f9d 00063 (v16 CETP CETP 06040000 PTL 00000001) [ 0.000000] ACPI: SSDT 5f6db258 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 5f6db1b2 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 5f6dacbc 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 638MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00007000 - 0000df00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e1ed8] TEXT DATA BSS ==> [0000100000 - 00008e1ed8] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008e2000 - 00008e5210] BRK ==> [00008e2000 - 00008e5210] [ 0.000000] #6 [00008e6000 - 00009c1000] PGTABLE ==> [00008e6000 - 00009c1000] [ 0.000000] #7 [00009c1000 - 0001158e2f] NEW RAMDISK ==> [00009c1000 - 0001158e2f] [ 0.000000] #8 [0000007000 - 000000e000] BOOTMAP ==> [0000007000 - 000000e000] [ 0.000000] found SMP MP-table at [c00f7b70] f7b70 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005f6d0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005f6d0 [ 0.000000] On node 0 totalpages: 390763 [ 0.000000] free_area_init_node: node 0, pgdat c079c940, node_mem_map c115a000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1278 pages used for memmap [ 0.000000] HighMem zone: 162260 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:80000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1d53000 s36056 r0 d21288 u65536 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387709 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-30-generic root=UUID=eb04a4ea-118c-4acf-b510-fe7043480ce7 ro quiet quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7817280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0005f6d0) [ 0.000000] Memory: 1524600k/1563456k available (4689k kernel code, 37564k reserved, 2122k data, 664k init, 654152k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a7000 - 0xc084d000 ( 664 kB) [ 0.000000] .data : 0xc0594467 - 0xc07a6f08 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0594467 (4689 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1595.957 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.91 BogoMIPS (lpj=6383828) [ 0.004048] Security Framework initialized [ 0.004093] AppArmor: AppArmor initialized [ 0.004112] Mount-cache hash table entries: 512 [ 0.004359] Initializing cgroup subsys ns [ 0.004369] Initializing cgroup subsys cpuacct [ 0.004379] Initializing cgroup subsys memory [ 0.004392] Initializing cgroup subsys devices [ 0.004399] Initializing cgroup subsys freezer [ 0.004404] Initializing cgroup subsys net_cls [ 0.004442] Atom PSE erratum detected, BIOS microcode update recommended [ 0.004451] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004458] CPU: L2 cache: 512K [ 0.004465] CPU: Physical Processor ID: 0 [ 0.008011] CPU: Processor Core ID: 0 [ 0.008019] mce: CPU supports 5 MCE banks [ 0.008036] CPU0: Thermal monitoring handled by SMI [ 0.008045] using mwait in idle threads. [ 0.008057] Performance Events: Atom events, Intel PMU driver. [ 0.008076] ... version: 3 [ 0.008081] ... bit width: 40 [ 0.008085] ... generic registers: 2 [ 0.008090] ... value mask: 000000ffffffffff [ 0.008095] ... max period: 000000007fffffff [ 0.008100] ... fixed-purpose events: 3 [ 0.008105] ... event mask: 0000000700000003 [ 0.008114] Checking 'hlt' instruction... OK. [ 0.024017] Disabling 4MB page tables to avoid TLB bug [ 0.028616] ACPI: Core revision 20090903 [ 0.044019] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044032] ftrace: allocating 21799 entries in 43 pages [ 0.048124] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.048530] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.090521] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.008000] CPU: L2 cache: 512K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 0 [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.176077] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.176096] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.180040] Brought up 2 CPUs [ 0.180048] Total of 2 processors activated (6383.85 BogoMIPS). [ 0.180334] CPU0 attaching sched-domain: [ 0.180343] domain 0: span 0-1 level SIBLING [ 0.180349] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.180362] domain 1: span 0-1 level MC [ 0.180367] groups: 0-1 (cpu_power = 1178) [ 0.180379] CPU1 attaching sched-domain: [ 0.180384] domain 0: span 0-1 level SIBLING [ 0.180389] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.180400] domain 1: span 0-1 level MC [ 0.180405] groups: 0-1 (cpu_power = 1178) [ 0.180587] devtmpfs: initialized [ 0.180587] regulator: core version 0.5 [ 0.180587] Time: 18:53:38 Date: 04/05/11 [ 0.180587] NET: Registered protocol family 16 [ 0.180587] Trying to unpack rootfs image as initramfs... [ 0.180608] EISA bus registered [ 0.180635] ACPI: bus type pci registered [ 0.180823] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.180833] PCI: MCFG area at e0000000 reserved in E820 [ 0.180839] PCI: Using MMCONFIG for extended config space [ 0.180845] PCI: Using configuration type 1 for base access [ 0.185857] bio: create slab at 0 [ 0.188182] ACPI: EC: Look up EC in DSDT [ 0.195254] ACPI: BIOS _OSI(Linux) query ignored [ 0.205923] ACPI: Interpreter enabled [ 0.205923] ACPI: (supports S0 S3 S4 S5) [ 0.205923] ACPI: Using IOAPIC for interrupt routing [ 0.230669] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.231400] ACPI: No dock devices found. [ 0.232977] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.233188] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0500000-0xf057ffff] [ 0.233202] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] [ 0.233214] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.233227] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0600000-0xf063ffff] [ 0.233297] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0580000-0xf05fffff] [ 0.233469] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0640000-0xf0643fff] [ 0.233559] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.233570] pci 0000:00:1b.0: PME# disabled [ 0.233715] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.233727] pci 0000:00:1c.0: PME# disabled [ 0.233870] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.233881] pci 0000:00:1c.1: PME# disabled [ 0.234021] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.234032] pci 0000:00:1c.2: PME# disabled [ 0.234134] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.234233] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.234331] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.234429] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] [ 0.234541] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0844000-0xf08443ff] [ 0.234628] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.234639] pci 0000:00:1d.7: PME# disabled [ 0.234880] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.234892] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.234907] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007) [ 0.234987] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.235003] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.235019] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.235034] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.235049] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.235142] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf] [ 0.235159] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3] [ 0.235176] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af] [ 0.235192] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f] [ 0.235210] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf] [ 0.235228] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0844400-0xf08447ff] [ 0.235278] pci 0000:00:1f.2: PME# supported from D3hot [ 0.235288] pci 0000:00:1f.2: PME# disabled [ 0.235376] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff] [ 0.235675] pci 0000:02:00.0: reg 10 64bit mmio: [0xf0200000-0xf020ffff] [ 0.235942] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.235961] pci 0000:02:00.0: PME# disabled [ 0.236111] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.236123] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0200000-0xf02fffff] [ 0.236140] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf00fffff] [ 0.236232] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.236243] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0300000-0xf03fffff] [ 0.236260] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0100000-0xf01fffff] [ 0.236650] pci 0000:05:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff] [ 0.236895] pci 0000:05:00.0: supports D1 D2 [ 0.236903] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.236922] pci 0000:05:00.0: PME# disabled [ 0.237091] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0400000-0xf04fffff] [ 0.237198] pci 0000:00:1e.0: transparent bridge [ 0.237256] pci_bus 0000:00: on NUMA node 0 [ 0.237277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.237907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.238142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.238366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.238674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.259782] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.260093] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) [ 0.260378] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 0.260659] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.260927] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.261236] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.261514] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.261783] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.262125] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.262163] vgaarb: loaded [ 0.262515] SCSI subsystem initialized [ 0.262754] libata version 3.00 loaded. [ 0.263032] usbcore: registered new interface driver usbfs [ 0.263081] usbcore: registered new interface driver hub [ 0.263182] usbcore: registered new device driver usb [ 0.263686] ACPI: WMI: Mapper loaded [ 0.263695] PCI: Using ACPI for IRQ routing [ 0.264585] NetLabel: Initializing [ 0.264592] NetLabel: domain hash size = 128 [ 0.264598] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.264631] NetLabel: unlabeled traffic allowed by default [ 0.264755] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.264773] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.272094] Switching to clocksource tsc [ 0.277103] AppArmor: AppArmor Filesystem Enabled [ 0.277149] pnp: PnP ACPI init [ 0.277192] ACPI: bus type pnp registered [ 0.283985] pnp: PnP ACPI: found 10 devices [ 0.283995] ACPI: ACPI bus type pnp unregistered [ 0.284006] PnPBIOS: Disabled by ACPI PNP [ 0.284040] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.284052] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.284062] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.284072] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.284082] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.284093] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.284103] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.284113] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.284136] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.284157] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.284168] system 00:05: ioport range 0x1000-0x107f has been reserved [ 0.284177] system 00:05: ioport range 0x1180-0x11bf has been reserved [ 0.284187] system 00:05: ioport range 0x1640-0x164f has been reserved [ 0.284198] system 00:05: ioport range 0xfe00-0xfe00 has been reserved [ 0.284208] system 00:05: ioport range 0x380-0x384 has been reserved [ 0.284218] system 00:05: ioport range 0x386-0x387 has been reserved [ 0.284236] system 00:06: ioport range 0x6a0-0x6af has been reserved [ 0.284246] system 00:06: ioport range 0x6b0-0x6ff has been reserved [ 0.319488] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.319503] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.319517] pci 0000:00:1c.0: MEM window: 0xf0200000-0xf02fffff [ 0.319530] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f00fffff [ 0.319547] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.319557] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.319571] pci 0000:00:1c.1: MEM window: 0xf0300000-0xf03fffff [ 0.319602] pci 0000:00:1c.1: PREFETCH window: 0x000000f0100000-0x000000f01fffff [ 0.319621] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 [ 0.319631] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.319645] pci 0000:00:1c.2: MEM window: 0xf0400000-0xf04fffff [ 0.319658] pci 0000:00:1c.2: PREFETCH window: 0x00000060000000-0x000000601fffff [ 0.319678] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.319685] pci 0000:00:1e.0: IO window: disabled [ 0.319697] pci 0000:00:1e.0: MEM window: disabled [ 0.319708] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.319752] alloc irq_desc for 17 on node -1 [ 0.319761] alloc kstat_irqs on node -1 [ 0.319780] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.319796] pci 0000:00:1c.0: setting latency timer to 64 [ 0.319821] alloc irq_desc for 16 on node -1 [ 0.319827] alloc kstat_irqs on node -1 [ 0.319839] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.319852] pci 0000:00:1c.1: setting latency timer to 64 [ 0.319875] alloc irq_desc for 18 on node -1 [ 0.319881] alloc kstat_irqs on node -1 [ 0.319892] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.319904] pci 0000:00:1c.2: setting latency timer to 64 [ 0.319923] pci 0000:00:1e.0: setting latency timer to 64 [ 0.319935] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.319943] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.319952] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.319961] pci_bus 0000:02: resource 1 mem: [0xf0200000-0xf02fffff] [ 0.319970] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf00fffff] [ 0.319979] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] [ 0.319987] pci_bus 0000:03: resource 1 mem: [0xf0300000-0xf03fffff] [ 0.319996] pci_bus 0000:03: resource 2 pref mem [0xf0100000-0xf01fffff] [ 0.320004] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff] [ 0.320013] pci_bus 0000:05: resource 1 mem: [0xf0400000-0xf04fffff] [ 0.320021] pci_bus 0000:05: resource 2 pref mem [0x60000000-0x601fffff] [ 0.320030] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.320039] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] [ 0.320137] NET: Registered protocol family 2 [ 0.320417] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.321352] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.322552] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.323144] TCP: Hash tables configured (established 131072 bind 65536) [ 0.323157] TCP reno registered [ 0.323452] NET: Registered protocol family 1 [ 0.323516] pci 0000:00:02.0: Boot video device [ 0.323787] Simple Boot Flag at 0x36 set to 0x1 [ 0.324300] cpufreq-nforce2: No nForce2 chipset. [ 0.324384] Scanning for low memory corruption every 60 seconds [ 0.324760] audit: initializing netlink socket (disabled) [ 0.324790] type=2000 audit(1302029618.323:1): initialized [ 0.346326] highmem bounce pool size: 64 pages [ 0.346344] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.351818] VFS: Disk quotas dquot_6.5.2 [ 0.352018] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.354131] fuse init (API version 7.13) [ 0.354452] msgmni has been set to 1701 [ 0.355142] alg: No test for stdrng (krng) [ 0.355353] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.355365] io scheduler noop registered [ 0.355371] io scheduler anticipatory registered [ 0.355377] io scheduler deadline registered [ 0.355529] io scheduler cfq registered (default) [ 0.355907] alloc irq_desc for 24 on node -1 [ 0.355915] alloc kstat_irqs on node -1 [ 0.355940] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.355960] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.356268] alloc irq_desc for 25 on node -1 [ 0.356276] alloc kstat_irqs on node -1 [ 0.356297] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.356317] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.356609] alloc irq_desc for 26 on node -1 [ 0.356616] alloc kstat_irqs on node -1 [ 0.356635] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.356654] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.356901] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.357208] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.363115] ACPI: AC Adapter [ACAD] (off-line) [ 0.363390] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.363402] ACPI: Power Button [PWRB] [ 0.363549] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.363559] ACPI: Sleep Button [SLPB] [ 0.363723] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.463846] ACPI: Lid Switch [LID] [ 0.464076] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.464087] ACPI: Power Button [PWRF] [ 0.465806] ACPI: SSDT 5f6dbb21 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.467050] ACPI: SSDT 5f6db4b7 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.473881] Monitor-Mwait will be used to enter C-1 state [ 0.474012] Monitor-Mwait will be used to enter C-2 state [ 0.474124] Monitor-Mwait will be used to enter C-3 state [ 0.474147] Marking TSC unstable due to TSC halts in idle [ 0.474329] processor LNXCPU:00: registered as cooling_device0 [ 0.475424] ACPI: SSDT 5f6dbd66 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.476311] ACPI: SSDT 5f6dba9c 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.477931] Switching to clocksource hpet [ 0.485357] processor LNXCPU:01: registered as cooling_device1 [ 0.498720] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.498750] ACPI: Thermal Zone [TZ00] (37 C) [ 0.504387] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.508708] brd: module loaded [ 0.510503] loop: module loaded [ 0.510937] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.511257] ata_piix 0000:00:1f.1: version 2.13 [ 0.511291] alloc irq_desc for 19 on node -1 [ 0.511298] alloc kstat_irqs on node -1 [ 0.511317] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.511406] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.511668] isapnp: Scanning for PnP cards... [ 0.517450] scsi0 : ata_piix [ 0.541364] scsi1 : ata_piix [ 0.542796] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 0.542806] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 0.542881] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.542895] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 0.605510] ata2: port disabled. ignoring. [ 0.636526] Freeing initrd memory: 7775k freed [ 0.697106] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.697317] scsi2 : ata_piix [ 0.697516] scsi3 : ata_piix [ 0.697629] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19 [ 0.697638] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19 [ 0.698741] Fixed MDIO Bus: probed [ 0.698859] PPP generic driver version 2.4.2 [ 0.698996] tun: Universal TUN/TAP device driver, 1.6 [ 0.699002] tun: (C) 1999-2004 Max Krasnyansky [ 0.699271] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.699325] alloc irq_desc for 23 on node -1 [ 0.699332] alloc kstat_irqs on node -1 [ 0.699348] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.699385] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.699394] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.699494] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.699550] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.699572] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.703455] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.703492] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.703740] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000 [ 0.717033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.717304] usb usb1: configuration #1 chosen from 1 choice [ 0.717391] hub 1-0:1.0: USB hub found [ 0.717415] hub 1-0:1.0: 8 ports detected [ 0.717575] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.717622] uhci_hcd: USB Universal Host Controller Interface driver [ 0.717702] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.717720] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.717729] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.717834] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.717881] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 0.718145] usb usb2: configuration #1 chosen from 1 choice [ 0.718225] hub 2-0:1.0: USB hub found [ 0.718245] hub 2-0:1.0: 2 ports detected [ 0.718362] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.718377] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.718385] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.718479] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.718521] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 0.718775] usb usb3: configuration #1 chosen from 1 choice [ 0.718855] hub 3-0:1.0: USB hub found [ 0.718875] hub 3-0:1.0: 2 ports detected [ 0.718989] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.719004] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.719013] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.719121] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.719183] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 0.719432] usb usb4: configuration #1 chosen from 1 choice [ 0.719511] hub 4-0:1.0: USB hub found [ 0.719531] hub 4-0:1.0: 2 ports detected [ 0.719647] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.719662] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.719671] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.719767] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.719823] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 [ 0.720084] usb usb5: configuration #1 chosen from 1 choice [ 0.720184] hub 5-0:1.0: USB hub found [ 0.720207] hub 5-0:1.0: 2 ports detected [ 0.720458] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.735081] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 0.735089] If AUX port is really absent please use the 'i8042.noaux' option. [ 0.751147] ACPI: Battery Slot [BAT0] (battery present) [ 0.757422] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.757452] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.757836] mice: PS/2 mouse device common for all mice [ 0.760488] rtc_cmos 00:07: RTC can wake from S4 [ 0.760599] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.760654] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.760992] device-mapper: uevent: version 1.0.3 [ 0.761375] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.761592] device-mapper: multipath: version 1.1.0 loaded [ 0.761600] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.761960] EISA: Probing bus 0 at eisa.0 [ 0.761974] Cannot allocate resource for EISA slot 1 [ 0.761981] Cannot allocate resource for EISA slot 2 [ 0.761988] Cannot allocate resource for EISA slot 3 [ 0.761994] Cannot allocate resource for EISA slot 4 [ 0.762022] EISA: Detected 0 cards. [ 0.762465] cpuidle: using governor ladder [ 0.762812] cpuidle: using governor menu [ 0.763994] TCP cubic registered [ 0.764505] NET: Registered protocol family 10 [ 0.765845] lo: Disabled Privacy Extensions [ 0.766777] NET: Registered protocol family 17 [ 0.768080] Using IPI No-Shortcut mode [ 0.768341] PM: Resume from disk failed. [ 0.768371] registered taskstats version 1 [ 0.769446] Magic number: 7:610:897 [ 0.769595] rtc_cmos 00:07: setting system clock to 2011-04-05 18:53:39 UTC (1302029619) [ 0.769605] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.769610] EDD information not available. [ 0.793222] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.868905] isapnp: No Plug & Play device found [ 0.917820] ata3.00: ATA-8: WDC WD1600BEVS-08VAT2, 14.01A14, max UDMA/133 [ 0.917837] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.933322] ata3.00: configured for UDMA/133 [ 1.184190] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.498829] usb 1-3: configuration #1 chosen from 1 choice [ 1.748213] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 1.891827] usb 1-5: configuration #1 chosen from 1 choice [ 2.136205] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 2.307029] usb 3-2: configuration #1 chosen from 1 choice [ 5.800181] ata1: link is slow to respond, please be patient (ready=0) [ 9.504639] ata1.00: CFA: SSD 4G, Ver2.X0C, max UDMA/100 [ 9.504648] ata1.00: 7880544 sectors, multi 0: LBA [ 9.504691] ata1.00: limited to UDMA/33 due to 40-wire cable [ 9.512569] ata1.00: configured for UDMA/33 [ 9.512935] scsi 0:0:0:0: Direct-Access ATA SSD 4G Ver2 PQ: 0 ANSI: 5 [ 9.513331] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.513388] sd 0:0:0:0: [sda] 7880544 512-byte logical blocks: (4.03 GB/3.75 GiB) [ 9.513695] sd 0:0:0:0: [sda] Write Protect is off [ 9.513706] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.513761] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 14.0 PQ: 0 ANSI: 5 [ 9.513799] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9.514182] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 9.514344] sda: [ 9.514577] sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 9.514784] sd 2:0:0:0: [sdb] Write Protect is off [ 9.514791] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.514895] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.515395] sdb: sda2 [ 9.516542] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.877989] sdb1 < sdb5 sdb6 > sdb2 sdb3 [ 9.917045] sd 2:0:0:0: [sdb] Attached SCSI disk [ 9.917123] Freeing unused kernel memory: 664k freed [ 9.917688] Write protecting the kernel text: 4692k [ 9.917772] Write protecting the kernel read-only data: 1844k [ 9.957506] udev: starting version 151 [ 10.341961] tg3.c:v3.102 (September 1, 2009) [ 10.342048] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.342075] tg3 0000:02:00.0: setting latency timer to 64 [ 10.390366] Initializing USB Mass Storage driver... [ 10.393270] scsi4 : SCSI emulation for USB Mass Storage devices [ 10.397226] usbcore: registered new interface driver usb-storage [ 10.397239] USB Mass Storage support registered. [ 10.397478] usb-storage: device found at 4 [ 10.397485] usb-storage: waiting for device to settle before scanning [ 10.659219] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:23:8b:49:f4:1e [ 10.659229] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0]) [ 10.659236] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0] [ 10.659242] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 10.663091] kjournald starting. Commit interval 5 seconds [ 10.663163] EXT3-fs: mounted filesystem with ordered data mode. [ 15.396685] usb-storage: device scan complete [ 15.398895] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 15.400191] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 15.404240] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 28.568520] udev: starting version 151 [ 28.586287] Adding 1951856k swap on /dev/sdb6. Priority:-1 extents:1 across:1951856k [ 28.694796] lp: driver loaded but no devices found [ 29.117349] acpi device:03: registered as cooling_device2 [ 29.117866] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 29.118035] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 29.208929] lib80211: common routines for IEEE802.11 drivers [ 29.208942] lib80211_crypt: registered algorithm 'NULL' [ 29.209052] Linux agpgart interface v0.103 [ 29.299869] intel_rng: FWH not detected [ 29.300215] Linux video capture interface: v2.00 [ 29.368245] Bluetooth: Core ver 2.15 [ 29.412436] NET: Registered protocol family 31 [ 29.412444] Bluetooth: HCI device and connection manager initialized [ 29.412452] Bluetooth: HCI socket layer initialized [ 29.426188] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 29.426636] usbcore: registered new interface driver btusb [ 29.485305] wl: module license 'MIXED/Proprietary' taints kernel. [ 29.485315] Disabling lock debugging due to kernel taint [ 29.506915] EXT3 FS on sdb5, internal journal [ 29.572220] wl 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 29.572242] wl 0000:05:00.0: setting latency timer to 64 [ 29.677564] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 29.677859] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 29.683262] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 29.739057] [drm] Initialized drm 1.1.0 20060810 [ 29.765718] lib80211_crypt: registered algorithm 'TKIP' [ 29.775244] type=1505 audit(1302029648.502:2): operation="profile_load" pid=617 name="/sbin/dhclient3" [ 29.778576] type=1505 audit(1302029648.506:3): operation="profile_load" pid=617 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 29.782149] type=1505 audit(1302029648.511:4): operation="profile_load" pid=617 name="/usr/lib/connman/scripts/dhclient-script" [ 29.805356] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241) [ 29.818079] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input7 [ 29.818746] usbcore: registered new interface driver uvcvideo [ 29.819490] USB Video Class driver (v0.1.0) [ 29.858536] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36 [ 30.087455] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 30.087471] i915 0000:00:02.0: setting latency timer to 64 [ 30.121107] [drm] set up 7M of stolen space [ 30.164994] kjournald starting. Commit interval 5 seconds [ 30.167946] EXT3 FS on sda2, internal journal [ 30.167963] EXT3-fs: mounted filesystem with ordered data mode. [ 30.251618] kjournald starting. Commit interval 5 seconds [ 30.274772] EXT3 FS on sdb2, internal journal [ 30.274790] EXT3-fs: mounted filesystem with ordered data mode. [ 30.286289] [drm] initialized overlay support [ 30.430017] kjournald starting. Commit interval 5 seconds [ 30.430053] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 30.430450] EXT3 FS on sdb3, internal journal [ 30.430463] EXT3-fs: mounted filesystem with ordered data mode. [ 30.665211] fb0: inteldrmfb frame buffer device [ 30.665219] registered panic notifier [ 30.665238] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 30.665342] alloc irq_desc for 22 on node -1 [ 30.665350] alloc kstat_irqs on node -1 [ 30.665368] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 30.665460] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 30.671903] vga16fb: initializing [ 30.671915] vga16fb: mapped to 0xc00a0000 [ 30.671926] vga16fb: not registering due to another framebuffer present [ 30.729882] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 [ 30.814388] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 30.846202] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 30.972116] Console: switching to colour frame buffer device 128x36 [ 31.325049] type=1505 audit(1302029650.054:5): operation="profile_load" pid=829 name="/usr/share/gdm/guest-session/Xsession" [ 31.342859] type=1505 audit(1302029650.070:6): operation="profile_replace" pid=830 name="/sbin/dhclient3" [ 31.343709] type=1505 audit(1302029650.070:7): operation="profile_replace" pid=830 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 31.344260] type=1505 audit(1302029650.074:8): operation="profile_replace" pid=830 name="/usr/lib/connman/scripts/dhclient-script" [ 31.407199] type=1505 audit(1302029650.134:9): operation="profile_load" pid=840 name="/usr/bin/freshclam" [ 31.447054] type=1505 audit(1302029650.174:10): operation="profile_load" pid=843 name="/usr/sbin/clamd" [ 31.453405] type=1505 audit(1302029650.182:11): operation="profile_load" pid=837 name="/usr/bin/evince" [ 31.620565] alloc irq_desc for 27 on node -1 [ 31.620576] alloc kstat_irqs on node -1 [ 31.620657] tg3 0000:02:00.0: irq 27 for MSI/MSI-X [ 31.687116] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.285313] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 33.285323] tg3: eth0: Flow control is off for TX and off for RX. [ 33.285882] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 36.759038] ppdev: user-space parallel port driver [ 37.939991] CPU0 attaching NULL sched-domain. [ 37.940064] CPU1 attaching NULL sched-domain. [ 37.976177] CPU0 attaching sched-domain: [ 37.976189] domain 0: span 0-1 level SIBLING [ 37.976197] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 37.976214] domain 1: span 0-1 level MC [ 37.976222] groups: 0-1 (cpu_power = 1178) [ 37.976239] CPU1 attaching sched-domain: [ 37.976245] domain 0: span 0-1 level SIBLING [ 37.976253] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 37.976269] domain 1: span 0-1 level MC [ 37.976276] groups: 0-1 (cpu_power = 1178) [ 42.529036] eth1: no IPv6 routers present [ 43.848033] eth0: no IPv6 routers present [ 55.867026] __ratelimit: 21 callbacks suppressed [ 55.867040] peercast[1793]: segfault at efe070 ip 00237330 sp bfef2d70 error 4 in libc-2.11.1.so[1d8000+153000] [ 57.224250] Bluetooth: L2CAP ver 2.14 [ 57.224260] Bluetooth: L2CAP socket layer initialized [ 57.240611] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 57.240622] Bluetooth: BNEP filters: protocol multicast [ 57.266950] Bridge firewalling registered [ 57.288975] Bluetooth: SCO (Voice Link) ver 0.6 [ 57.288985] Bluetooth: SCO socket layer initialized [ 57.429852] Bluetooth: RFCOMM TTY layer initialized [ 57.429868] Bluetooth: RFCOMM socket layer initialized [ 57.429874] Bluetooth: RFCOMM ver 1.11 [ 599.454082] tg3: eth0: Link is down. [ 2306.907934] CPU0 attaching NULL sched-domain. [ 2306.907947] CPU1 attaching NULL sched-domain. [ 2306.928282] CPU0 attaching sched-domain: [ 2306.928298] domain 0: span 0-1 level SIBLING [ 2306.928311] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 2306.928337] domain 1: span 0-1 level MC [ 2306.928348] groups: 0-1 (cpu_power = 1178) [ 2306.928369] CPU1 attaching sched-domain: [ 2306.928379] domain 0: span 0-1 level SIBLING [ 2306.928390] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 2306.928412] domain 1: span 0-1 level MC [ 2306.928423] groups: 0-1 (cpu_power = 1178) [ 2308.418564] PM: Syncing filesystems ... done. [ 2308.421209] PM: Preparing system for mem sleep [ 2308.421217] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 2308.423405] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 2308.423631] PM: Entering mem sleep [ 2308.423653] Suspending console(s) (use no_console_suspend to debug) [ 2308.424226] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 2308.764216] sd 2:0:0:0: [sdb] Stopping disk [ 2309.081904] PM: suspend of drv:sd dev:2:0:0:0 complete after 657.668 msecs [ 2309.081945] sd 0:0:0:0: [sda] Stopping disk [ 2309.083947] btusb_intr_complete: hci0 urb f0df4a80 failed to resubmit (1) [ 2309.084943] btusb_bulk_complete: hci0 urb f0df4c80 failed to resubmit (1) [ 2309.085952] btusb_bulk_complete: hci0 urb f0df4780 failed to resubmit (1) [ 2309.560603] PM: suspend of drv:psmouse dev:serio1 complete after 428.348 msecs [ 2309.664188] PM: suspend of drv:atkbd dev:serio0 complete after 103.558 msecs [ 2309.668286] ACPI handle has no context! [ 2309.668742] wl 0000:05:00.0: PCI INT A disabled [ 2309.684891] ata_piix 0000:00:1f.2: PCI INT B disabled [ 2309.700464] ata_piix 0000:00:1f.1: PCI INT B disabled [ 2309.700509] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 2309.700525] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 2309.700540] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 2309.700555] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 2309.700570] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 2309.804277] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 2309.820174] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 119.564 msecs [ 2309.835713] i915 0000:00:02.0: PCI INT A disabled [ 2309.848490] PM: suspend of devices complete after 1424.538 msecs [ 2309.848504] PM: suspend devices took 1.428 seconds [ 2309.864366] PM: late suspend of devices complete after 15.848 msecs [ 2309.864405] ACPI: Preparing to enter system sleep state S3 [ 2309.941525] Disabling non-boot CPUs ... [ 2309.941559] CPU0 attaching NULL sched-domain. [ 2309.941568] CPU1 attaching NULL sched-domain. [ 2309.988035] CPU0 attaching NULL sched-domain. [ 2309.989271] Breaking affinity for irq 12 [ 2309.989288] Breaking affinity for irq 16 [ 2309.989309] Breaking affinity for irq 23 [ 2309.989321] Breaking affinity for irq 27 [ 2310.092039] CPU 1 is now offline [ 2310.092044] SMP alternatives: switching to UP code [ 2310.098501] Extended CMOS year: 2000 [ 2310.098501] Back to C! [ 2310.098501] CPU0: Thermal monitoring handled by SMI [ 2310.098501] Extended CMOS year: 2000 [ 2310.098501] Enabling non-boot CPUs ... [ 2310.098501] SMP alternatives: switching to SMP code [ 2310.104309] Booting processor 1 APIC 0x1 ip 0x6000 [ 2310.098397] Initializing CPU#1 [ 2310.098397] Atom PSE erratum detected, BIOS microcode update recommended [ 2310.098397] CPU: L1 I cache: 32K, L1 D cache: 24K [ 2310.098397] CPU: L2 cache: 512K [ 2310.098397] CPU: Physical Processor ID: 0 [ 2310.098397] CPU: Processor Core ID: 0 [ 2310.098397] CPU1: Thermal monitoring enabled (TM2) [ 2310.192160] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 2310.192271] CPU0 attaching NULL sched-domain. [ 2310.220043] CPU0 attaching sched-domain: [ 2310.220052] domain 0: span 0-1 level SIBLING [ 2310.220059] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 2310.220073] domain 1: span 0-1 level MC [ 2310.220079] groups: 0-1 (cpu_power = 1178) [ 2310.220091] CPU1 attaching sched-domain: [ 2310.220097] domain 0: span 0-1 level SIBLING [ 2310.220103] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 2310.220116] domain 1: span 0-1 level MC [ 2310.220122] groups: 0-1 (cpu_power = 1178) [ 2310.225048] CPU1 is up [ 2310.225236] ACPI: Waking up from system sleep state S3 [ 2310.296298] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 2310.296349] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 2310.296411] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 2310.296425] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 2310.296475] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x40103) [ 2310.296497] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf001f001) [ 2310.296509] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020) [ 2310.296522] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 2310.296534] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200) [ 2310.296550] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 2310.296565] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 2310.296636] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020b) [ 2310.296658] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf011f011) [ 2310.296671] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf030f030) [ 2310.296683] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 2310.296701] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 2310.296715] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 2310.296785] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40303) [ 2310.296807] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x60116001) [ 2310.296819] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040) [ 2310.296832] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) [ 2310.296850] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 2310.296864] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 2310.296948] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 2310.297001] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 2310.297053] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 2310.297105] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 2310.297167] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 2310.297218] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 2310.297231] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 2310.297243] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 2310.297339] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff) [ 2310.297394] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 2310.297600] tg3 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 2310.297629] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfc7f0000) [ 2310.297679] tg3 0000:02:00.0: restoring config space at offset 0x5 (was 0xffb9ffd7, writing 0x0) [ 2310.297698] tg3 0000:02:00.0: restoring config space at offset 0x4 (was 0xfffe0004, writing 0xf0200004) [ 2310.297716] tg3 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 2310.297740] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 2310.298087] wl 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103) [ 2310.298157] wl 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004) [ 2310.298175] wl 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 2310.298199] wl 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 2310.298716] PM: early resume of devices complete after 2.567 msecs [ 2310.728496] PM: resume of drv:battery dev:PNP0C0A:00 complete after 384.105 msecs [ 2310.928350] PM: resume of drv:button dev:PNP0C0D:00 complete after 199.831 msecs [ 2310.967283] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2310.967292] i915 0000:00:02.0: setting latency timer to 64 [ 2311.036387] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2311.036408] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2311.036504] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2311.036515] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2311.036546] usb usb2: root hub lost power or was reset [ 2311.036576] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2311.036587] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2311.036615] usb usb3: root hub lost power or was reset [ 2311.036650] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2311.036666] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2311.036696] usb usb4: root hub lost power or was reset [ 2311.036726] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2311.036736] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2311.036765] usb usb5: root hub lost power or was reset [ 2311.036795] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2311.036805] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2311.036835] pci 0000:00:1e.0: setting latency timer to 64 [ 2311.036868] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2311.036877] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2311.036924] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2311.036935] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2311.037342] wl 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2311.037362] wl 0000:05:00.0: setting latency timer to 64 [ 2311.038230] ata2: port disabled. ignoring. [ 2311.288202] PM: resume of drv:usb dev:usb1 complete after 250.036 msecs [ 2311.536200] PM: resume of drv:usb dev:usb3 complete after 247.935 msecs [ 2311.656205] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [ 2311.932264] PM: resume of drv:usb dev:1-3 complete after 387.022 msecs [ 2312.044247] usb 1-5: reset high speed USB device using ehci_hcd and address 4 [ 2312.184165] PM: resume of drv:usb dev:1-5 complete after 251.858 msecs [ 2312.296184] usb 3-2: reset full speed USB device using uhci_hcd and address 2 [ 2312.449329] ata3.00: configured for UDMA/133 [ 2312.452277] btusb 3-2:1.0: no reset_resume for driver btusb? [ 2312.452291] btusb 3-2:1.1: no reset_resume for driver btusb? [ 2312.704560] PM: resume of drv:usb dev:3-2 complete after 520.356 msecs [ 2312.704626] sd 0:0:0:0: [sda] Starting disk [ 2316.080181] ata1: link is slow to respond, please be patient (ready=0) [ 2323.740185] ata1: link is slow to respond, please be patient (ready=0) [ 2327.444634] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 2327.444643] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 2327.452541] ata1.00: configured for UDMA/33 [ 2327.453573] PM: resume of drv:sd dev:0:0:0:0 complete after 14748.939 msecs [ 2327.453610] sd 2:0:0:0: [sdb] Starting disk [ 2327.796148] PM: resume of drv:sd dev:2:0:0:0 complete after 342.528 msecs [ 2327.796483] PM: resume of devices complete after 17497.424 msecs [ 2327.797103] PM: resume devices took 17.500 seconds [ 2327.797108] ------------[ cut here ]------------ [ 2327.797120] WARNING: at /build/buildd/linux-2.6.32/kernel/power/suspend_test.c:53 suspend_test_finish+0x89/0x90() [ 2327.797125] Hardware name: 40682TG [ 2327.797129] Component: resume devices, time: 17500 [ 2327.797133] Modules linked in: binfmt_misc rfcomm sco bridge stp bnep l2cap ppdev parport_pc joydev snd_hda_codec_realtek fbcon tileblit font bitblit softcursor vga16fb vgastate snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device i915 snd drm_kms_helper uvcvideo lib80211_crypt_tkip drm intel_agp wl(P) psmouse soundcore btusb bluetooth videodev v4l1_compat serio_raw lib80211 i2c_algo_bit snd_page_alloc agpgart video output lp parport usb_storage tg3 [ 2327.797211] Pid: 2245, comm: pm-suspend Tainted: P 2.6.32-30-generic #59-Ubuntu [ 2327.797216] Call Trace: [ 2327.797227] [] warn_slowpath_common+0x72/0xa0 [ 2327.797235] [] ? suspend_test_finish+0x89/0x90 [ 2327.797241] [] ? suspend_test_finish+0x89/0x90 [ 2327.797248] [] warn_slowpath_fmt+0x2b/0x30 [ 2327.797255] [] suspend_test_finish+0x89/0x90 [ 2327.797264] [] suspend_devices_and_enter+0xa1/0xd0 [ 2327.797272] [] ? printk+0x1d/0x25 [ 2327.797279] [] enter_state+0xbd/0xf0 [ 2327.797286] [] state_store+0x75/0xc0 [ 2327.797293] [] ? state_store+0x0/0xc0 [ 2327.797302] [] kobj_attr_store+0x20/0x30 [ 2327.797310] [] sysfs_write_file+0x95/0x100 [ 2327.797318] [] vfs_write+0xa2/0x1a0 [ 2327.797325] [] ? sysfs_write_file+0x0/0x100 [ 2327.797333] [] ? do_page_fault+0x160/0x3a0 [ 2327.797339] [] sys_write+0x42/0x70 [ 2327.797347] [] syscall_call+0x7/0xb [ 2327.797354] [] ? do_general_protection+0x10/0x170 [ 2327.797360] ---[ end trace 07bc1d32d7aa3396 ]--- [ 2327.797452] PM: Finishing wakeup. [ 2327.797456] Restarting tasks ... done. [ 2328.285077] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 2328.489053] usb 2-2: configuration #1 chosen from 1 choice [ 2328.780156] usbcore: registered new interface driver hiddev [ 2328.822597] input: HID 1241:1166 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input10 [ 2328.823065] generic-usb 0003:1241:1166.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.0-2/input0 [ 2328.823165] usbcore: registered new interface driver usbhid [ 2328.823177] usbhid: v2.6:USB HID core driver [ 2328.969403] tg3 0000:02:00.0: irq 27 for MSI/MSI-X [ 2329.005084] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2330.026453] CPU0 attaching NULL sched-domain. [ 2330.026466] CPU1 attaching NULL sched-domain. [ 2330.049282] CPU0 attaching sched-domain: [ 2330.049304] domain 0: span 0-1 level SIBLING [ 2330.049321] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 2330.049358] domain 1: span 0-1 level MC [ 2330.049373] groups: 0-1 (cpu_power = 1178) [ 2330.049406] CPU1 attaching sched-domain: [ 2330.049421] domain 0: span 0-1 level SIBLING [ 2330.049436] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 2330.049470] domain 1: span 0-1 level MC [ 2330.049484] groups: 0-1 (cpu_power = 1178) [ 2339.920082] eth1: no IPv6 routers present [ 2370.113156] CPU0 attaching NULL sched-domain. [ 2370.113169] CPU1 attaching NULL sched-domain. [ 2370.141271] CPU0 attaching sched-domain: [ 2370.141287] domain 0: span 0-1 level SIBLING [ 2370.141300] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 2370.141326] domain 1: span 0-1 level MC [ 2370.141336] groups: 0-1 (cpu_power = 1178) [ 2370.141359] CPU1 attaching sched-domain: [ 2370.141368] domain 0: span 0-1 level SIBLING [ 2370.141379] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 2370.141402] domain 1: span 0-1 level MC [ 2370.141412] groups: 0-1 (cpu_power = 1178) [ 2967.061065] CE: hpet increasing min_delta_ns to 15000 nsec