[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=da0ee100-1144-4ce2-b23a-47216e8e3a76 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 120000000 mask FF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] modified: 00000000cff80000 - 00000000cff8e000 (ACPI data) [ 0.000000] modified: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff80000 page 4k [ 0.000000] kernel direct mapping tables up to cff80000 @ 10000-16000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000 [ 0.000000] RAMDISK: 377fc000 - 37fef1c2 [ 0.000000] ACPI: RSDP 00000000000fbc60 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cff80000 0003C (v01 A_M_I_ OEMRSDT 06000825 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 06000825 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff805c0 09104 (v01 A0753 A0753001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cff8e000 00040 [ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 06000825 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 06000825 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 06000825 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff896d0 00038 (v01 A_M_I_ OEMHPET 06000825 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000cff89710 000B0 (v01 A_M_I_ OEMOSFR 06000825 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 000000000003ffff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377fc000 - 0037fef1c2] RAMDISK ==> [00377fc000 - 0037fef1c2] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a30278] BRK ==> [0001a30000 - 0001a30278] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff80 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048335 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3823 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000 [ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031207 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=da0ee100-1144-4ce2-b23a-47216e8e3a76 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4048684k/4980736k available (5422k kernel code, 787396k absent, 144656k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2838.621 MHz processor. [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5677.24 BogoMIPS (lpj=28386210) [ 0.000028] Security Framework initialized [ 0.000045] AppArmor: AppArmor initialized [ 0.010014] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011779] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012627] Mount-cache hash table entries: 256 [ 0.012744] Initializing cgroup subsys ns [ 0.012749] Initializing cgroup subsys cpuacct [ 0.012751] Initializing cgroup subsys memory [ 0.012758] Initializing cgroup subsys devices [ 0.012759] Initializing cgroup subsys freezer [ 0.012761] Initializing cgroup subsys net_cls [ 0.012778] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.012779] CPU: L2 cache: 6144K [ 0.012782] CPU 0/0x0 -> Node 0 [ 0.012783] CPU: Physical Processor ID: 0 [ 0.012784] CPU: Processor Core ID: 0 [ 0.012787] mce: CPU supports 6 MCE banks [ 0.012794] CPU0: Thermal monitoring enabled (TM2) [ 0.012797] using mwait in idle threads. [ 0.012799] Performance Events: Core2 events, Intel PMU driver. [ 0.012803] ... version: 2 [ 0.012804] ... bit width: 40 [ 0.012805] ... generic registers: 2 [ 0.012806] ... value mask: 000000ffffffffff [ 0.012808] ... max period: 000000007fffffff [ 0.012809] ... fixed-purpose events: 3 [ 0.012810] ... event mask: 0000000700000003 [ 0.014866] ACPI: Core revision 20090903 [ 0.030006] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030010] ftrace: allocating 22527 entries in 89 pages [ 0.040037] Setting APIC routing to flat [ 0.040319] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.141245] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] CPU1: Thermal monitoring enabled (TM2) [ 0.300069] CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a [ 0.300074] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.310086] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.010000] Initializing CPU#2 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 2/0x2 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 2 [ 0.010000] CPU2: Thermal monitoring enabled (TM2) [ 0.470045] CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a [ 0.470050] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.480062] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.010000] Initializing CPU#3 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 3/0x3 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 3 [ 0.010000] CPU3: Thermal monitoring enabled (TM2) [ 0.640028] CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a [ 0.640033] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.650010] Brought up 4 CPUs [ 0.650012] Total of 4 processors activated (22708.86 BogoMIPS). [ 0.652237] CPU0 attaching sched-domain: [ 0.652239] domain 0: span 0-1 level MC [ 0.652241] groups: 0 1 [ 0.652244] domain 1: span 0-3 level CPU [ 0.652246] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048) [ 0.652251] CPU1 attaching sched-domain: [ 0.652253] domain 0: span 0-1 level MC [ 0.652254] groups: 1 0 [ 0.652257] domain 1: span 0-3 level CPU [ 0.652258] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048) [ 0.652262] CPU2 attaching sched-domain: [ 0.652264] domain 0: span 2-3 level MC [ 0.652265] groups: 2 3 [ 0.652268] domain 1: span 0-3 level CPU [ 0.652269] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048) [ 0.652273] CPU3 attaching sched-domain: [ 0.652275] domain 0: span 2-3 level MC [ 0.652276] groups: 3 2 [ 0.652279] domain 1: span 0-3 level CPU [ 0.652280] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048) [ 0.652409] devtmpfs: initialized [ 0.652409] regulator: core version 0.5 [ 0.652409] Time: 22:38:53 Date: 08/12/10 [ 0.652409] NET: Registered protocol family 16 [ 0.652409] Trying to unpack rootfs image as initramfs... [ 0.652409] ACPI: bus type pci registered [ 0.652409] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.652409] PCI: Not using MMCONFIG. [ 0.652409] PCI: Using configuration type 1 for base access [ 0.652409] bio: create slab at 0 [ 0.652409] ACPI: EC: Look up EC in DSDT [ 0.652510] ACPI: Executed 1 blocks of module-level executable AML code [ 0.663893] ACPI: Interpreter enabled [ 0.663897] ACPI: (supports S0 S1 S3 S4 S5) [ 0.663913] ACPI: Using IOAPIC for interrupt routing [ 0.663953] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.665632] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.670940] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.677130] ACPI Warning: Incorrect checksum in table [OEMB] - 7B, should be 72 (20090903/tbutils-314) [ 0.677239] ACPI: No dock devices found. [ 0.677328] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.677402] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.677405] pci 0000:00:01.0: PME# disabled [ 0.677461] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f] [ 0.677518] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] [ 0.677573] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f] [ 0.677632] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe7ffc00-0xfe7fffff] [ 0.677676] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.677680] pci 0000:00:1a.7: PME# disabled [ 0.677711] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe7f8000-0xfe7fbfff] [ 0.677745] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.677748] pci 0000:00:1b.0: PME# disabled [ 0.677797] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.677800] pci 0000:00:1c.0: PME# disabled [ 0.677854] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.677857] pci 0000:00:1c.4: PME# disabled [ 0.677907] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.677910] pci 0000:00:1c.5: PME# disabled [ 0.677952] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f] [ 0.678009] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] [ 0.678065] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f] [ 0.678123] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe7ff800-0xfe7ffbff] [ 0.678168] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.678171] pci 0000:00:1d.7: PME# disabled [ 0.678274] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.678277] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.678279] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.678325] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007] [ 0.678330] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03] [ 0.678334] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887] [ 0.678338] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803] [ 0.678343] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f] [ 0.678347] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f] [ 0.678383] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe7ff400-0xfe7ff4ff] [ 0.678394] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.678429] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007] [ 0.678434] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03] [ 0.678438] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887] [ 0.678443] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803] [ 0.678447] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f] [ 0.678451] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f] [ 0.678496] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.678503] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe8e0000-0xfe8effff] [ 0.678507] pci 0000:01:00.0: reg 20 io port: [0xc000-0xc0ff] [ 0.678514] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe8c0000-0xfe8dffff] [ 0.678529] pci 0000:01:00.0: supports D1 D2 [ 0.678557] pci 0000:01:00.1: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff] [ 0.678584] pci 0000:01:00.1: supports D1 D2 [ 0.678619] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.678621] pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.678625] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.678661] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.678740] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeafe000-0xfeafffff] [ 0.678748] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeaeffff] [ 0.678776] pci 0000:03:00.0: PME# supported from D3hot [ 0.678780] pci 0000:03:00.0: PME# disabled [ 0.678827] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07] [ 0.678835] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883] [ 0.678843] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807] [ 0.678850] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483] [ 0.678858] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f] [ 0.678936] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 0.678938] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.678986] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9c0000-0xfe9fffff] [ 0.679013] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe9a0000-0xfe9bffff] [ 0.679043] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.679047] pci 0000:02:00.0: PME# disabled [ 0.679088] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.679122] pci 0000:05:02.0: reg 10 32bit mmio: [0xfebf8000-0xfebfffff] [ 0.679189] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebf7800-0xfebf7fff] [ 0.679195] pci 0000:05:03.0: reg 14 io port: [0xec00-0xec7f] [ 0.679231] pci 0000:05:03.0: supports D2 [ 0.679233] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold [ 0.679236] pci 0000:05:03.0: PME# disabled [ 0.679271] pci 0000:00:1e.0: transparent bridge [ 0.679274] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.679277] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.679297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.679389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.679429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.679512] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.679560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.679618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.692309] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.692394] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.692479] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.692562] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.692647] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.692730] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.692814] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.692898] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.692981] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.692985] vgaarb: loaded [ 0.693054] SCSI subsystem initialized [ 0.693072] libata version 3.00 loaded. [ 0.693072] usbcore: registered new interface driver usbfs [ 0.693072] usbcore: registered new interface driver hub [ 0.693072] usbcore: registered new device driver usb [ 0.693072] ACPI: WMI: Mapper loaded [ 0.693072] PCI: Using ACPI for IRQ routing [ 0.693072] NetLabel: Initializing [ 0.693072] NetLabel: domain hash size = 128 [ 0.693072] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.693072] NetLabel: unlabeled traffic allowed by default [ 0.693072] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.693072] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.710016] Switching to clocksource tsc [ 0.711562] AppArmor: AppArmor Filesystem Enabled [ 0.711580] pnp: PnP ACPI init [ 0.711599] ACPI: bus type pnp registered [ 0.713972] pnp: PnP ACPI: found 15 devices [ 0.713973] ACPI: ACPI bus type pnp unregistered [ 0.713983] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.713989] system 00:07: ioport range 0x290-0x297 has been reserved [ 0.713993] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.713995] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.713997] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.713999] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.714001] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.714003] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.714005] system 00:08: iomem range 0xffa00000-0xffafffff has been reserved [ 0.714007] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.714010] system 00:08: iomem range 0xffe00000-0xffefffff has been reserved [ 0.714012] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved [ 0.714016] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.714018] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.714022] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.714026] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.714028] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.714030] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.714032] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved [ 0.718717] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.718719] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.718722] pci 0000:00:01.0: MEM window: 0xfe800000-0xfe8fffff [ 0.718724] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.718728] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.718730] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.718733] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf03fffff [ 0.718736] pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.718741] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.718743] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 0.718747] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff [ 0.718750] pci 0000:00:1c.4: PREFETCH window: 0x000000f0400000-0x000000f05fffff [ 0.718754] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 0.718757] pci 0000:00:1c.5: IO window: 0x2000-0x2fff [ 0.718760] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff [ 0.718763] pci 0000:00:1c.5: PREFETCH window: 0x000000f0600000-0x000000f07fffff [ 0.718768] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.718770] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.718774] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff [ 0.718777] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.718789] alloc irq_desc for 16 on node -1 [ 0.718791] alloc kstat_irqs on node -1 [ 0.718794] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.718797] pci 0000:00:01.0: setting latency timer to 64 [ 0.718803] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.718805] alloc irq_desc for 17 on node -1 [ 0.718807] alloc kstat_irqs on node -1 [ 0.718809] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.718812] pci 0000:00:1c.0: setting latency timer to 64 [ 0.718818] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.718821] pci 0000:00:1c.4: setting latency timer to 64 [ 0.718827] pci 0000:00:1c.5: enabling device (0106 -> 0107) [ 0.718829] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.718832] pci 0000:00:1c.5: setting latency timer to 64 [ 0.718837] pci 0000:00:1e.0: setting latency timer to 64 [ 0.718840] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.718842] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.718844] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.718846] pci_bus 0000:01: resource 1 mem: [0xfe800000-0xfe8fffff] [ 0.718847] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.718849] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff] [ 0.718851] pci_bus 0000:04: resource 1 mem: [0xf0000000-0xf03fffff] [ 0.718852] pci_bus 0000:04: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.718854] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.718856] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.718857] pci_bus 0000:03: resource 2 pref mem [0xf0400000-0xf05fffff] [ 0.718859] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.718861] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff] [ 0.718862] pci_bus 0000:02: resource 2 pref mem [0xf0600000-0xf07fffff] [ 0.718864] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] [ 0.718866] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.718867] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.718869] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.718896] NET: Registered protocol family 2 [ 0.719027] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.719966] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.723262] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.723713] TCP: Hash tables configured (established 524288 bind 65536) [ 0.723715] TCP reno registered [ 0.723819] NET: Registered protocol family 1 [ 0.723967] pci 0000:01:00.0: Boot video device [ 0.724245] Scanning for low memory corruption every 60 seconds [ 0.724352] audit: initializing netlink socket (disabled) [ 0.724361] type=2000 audit(1281652732.719:1): initialized [ 0.731525] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.732662] VFS: Disk quotas dquot_6.5.2 [ 0.732701] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.733151] fuse init (API version 7.13) [ 0.733211] msgmni has been set to 7907 [ 0.733482] alg: No test for stdrng (krng) [ 0.733532] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.733535] io scheduler noop registered [ 0.733536] io scheduler anticipatory registered [ 0.733538] io scheduler deadline registered [ 0.733564] io scheduler cfq registered (default) [ 0.733673] alloc irq_desc for 24 on node -1 [ 0.733675] alloc kstat_irqs on node -1 [ 0.733681] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.733685] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.733754] alloc irq_desc for 25 on node -1 [ 0.733755] alloc kstat_irqs on node -1 [ 0.733761] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.733767] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.733850] alloc irq_desc for 26 on node -1 [ 0.733851] alloc kstat_irqs on node -1 [ 0.733856] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.733862] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.733948] alloc irq_desc for 27 on node -1 [ 0.733950] alloc kstat_irqs on node -1 [ 0.733955] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.733961] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.734021] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.734098] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.734188] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.734191] ACPI: Power Button [PWRB] [ 0.734226] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.734228] ACPI: Power Button [PWRF] [ 0.734700] ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.734923] processor LNXCPU:00: registered as cooling_device0 [ 0.735150] ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.735347] processor LNXCPU:01: registered as cooling_device1 [ 0.735572] ACPI: SSDT 00000000cff8e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) [ 0.735761] processor LNXCPU:02: registered as cooling_device2 [ 0.735983] ACPI: SSDT 00000000cff8e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) [ 0.736172] processor LNXCPU:03: registered as cooling_device3 [ 0.739002] Linux agpgart interface v0.103 [ 0.739025] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.739108] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.739368] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.740164] brd: module loaded [ 0.740507] loop: module loaded [ 0.740561] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.740620] ata_piix 0000:00:1f.2: version 2.13 [ 0.740631] alloc irq_desc for 22 on node -1 [ 0.740632] alloc kstat_irqs on node -1 [ 0.740636] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.740640] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.740672] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.740731] scsi0 : ata_piix [ 0.740800] scsi1 : ata_piix [ 0.741853] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22 [ 0.741857] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22 [ 0.741885] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.741904] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.741950] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.741996] scsi2 : ata_piix [ 0.742056] scsi3 : ata_piix [ 0.743016] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22 [ 0.743019] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22 [ 0.743119] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 0.743127] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.743151] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 0.743163] pata_acpi 0000:03:00.1: PCI INT B disabled [ 0.743364] Fixed MDIO Bus: probed [ 0.743386] PPP generic driver version 2.4.2 [ 0.743411] tun: Universal TUN/TAP device driver, 1.6 [ 0.743413] tun: (C) 1999-2004 Max Krasnyansky [ 0.743469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.743481] alloc irq_desc for 18 on node -1 [ 0.743482] alloc kstat_irqs on node -1 [ 0.743486] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.743504] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.743510] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.743533] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.743554] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.747429] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.747439] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00 [ 0.769815] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.769922] usb usb1: configuration #1 chosen from 1 choice [ 0.769944] hub 1-0:1.0: USB hub found [ 0.769951] hub 1-0:1.0: 6 ports detected [ 0.770004] alloc irq_desc for 23 on node -1 [ 0.770006] alloc kstat_irqs on node -1 [ 0.770011] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.770030] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.770033] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.770060] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.770081] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.773950] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.773965] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800 [ 0.789810] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.789880] usb usb2: configuration #1 chosen from 1 choice [ 0.789902] hub 2-0:1.0: USB hub found [ 0.789908] hub 2-0:1.0: 6 ports detected [ 0.789955] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.789972] uhci_hcd: USB Universal Host Controller Interface driver [ 0.790010] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.790017] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.790020] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.790044] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.790071] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 0.790131] usb usb3: configuration #1 chosen from 1 choice [ 0.790148] hub 3-0:1.0: USB hub found [ 0.790152] hub 3-0:1.0: 2 ports detected [ 0.790189] alloc irq_desc for 21 on node -1 [ 0.790191] alloc kstat_irqs on node -1 [ 0.790195] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.790202] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.790204] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.790228] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.790254] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 0.790315] usb usb4: configuration #1 chosen from 1 choice [ 0.790334] hub 4-0:1.0: USB hub found [ 0.790338] hub 4-0:1.0: 2 ports detected [ 0.790367] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.790371] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.790373] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.790398] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.790417] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 [ 0.790474] usb usb5: configuration #1 chosen from 1 choice [ 0.790493] hub 5-0:1.0: USB hub found [ 0.790497] hub 5-0:1.0: 2 ports detected [ 0.790528] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.790532] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.790534] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.790555] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.790575] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 0.790633] usb usb6: configuration #1 chosen from 1 choice [ 0.790649] hub 6-0:1.0: USB hub found [ 0.790654] hub 6-0:1.0: 2 ports detected [ 0.790686] alloc irq_desc for 19 on node -1 [ 0.790687] alloc kstat_irqs on node -1 [ 0.790690] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.790694] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.790697] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.790719] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.790743] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 0.790811] usb usb7: configuration #1 chosen from 1 choice [ 0.790827] hub 7-0:1.0: USB hub found [ 0.790833] hub 7-0:1.0: 2 ports detected [ 0.790865] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.790869] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.790872] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.790900] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.790919] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 0.790979] usb usb8: configuration #1 chosen from 1 choice [ 0.790995] hub 8-0:1.0: USB hub found [ 0.790999] hub 8-0:1.0: 2 ports detected [ 0.791066] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.791067] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.791541] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.791616] mice: PS/2 mouse device common for all mice [ 0.791703] rtc_cmos 00:03: RTC can wake from S4 [ 0.791732] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.791752] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.791840] device-mapper: uevent: version 1.0.3 [ 0.791930] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.792042] Freeing initrd memory: 8140k freed [ 0.792089] device-mapper: multipath: version 1.1.0 loaded [ 0.792096] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.792467] cpuidle: using governor ladder [ 0.792468] cpuidle: using governor menu [ 0.792765] TCP cubic registered [ 0.792867] NET: Registered protocol family 10 [ 0.793260] lo: Disabled Privacy Extensions [ 0.793483] NET: Registered protocol family 17 [ 0.794365] PM: Resume from disk failed. [ 0.794382] registered taskstats version 1 [ 0.794870] Magic number: 6:828:653 [ 0.794955] rtc_cmos 00:03: setting system clock to 2010-08-12 22:38:53 UTC (1281652733) [ 0.794962] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.794963] EDD information not available. [ 1.100692] ata3: SATA link down (SStatus 0 SControl 300) [ 1.250048] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.250052] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.270404] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 [ 1.270407] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.270500] ata4.00: ATA-8: ST3500418AS, CC35, max UDMA/133 [ 1.270502] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.290321] ata1.00: configured for UDMA/133 [ 1.290436] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 1.290581] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.290589] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.290637] sd 0:0:0:0: [sda] Write Protect is off [ 1.290640] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.290674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.290791] sda: sda1 [ 1.292825] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.312537] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.313012] ata4.00: configured for UDMA/133 [ 1.330012] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 1.330315] ata2.00: ATAPI: PIONEER DVD-RW DVR-215, 1.13, max UDMA/66 [ 1.372681] ata2.00: configured for UDMA/66 [ 1.396813] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-215 1.13 PQ: 0 ANSI: 5 [ 1.438806] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.438810] Uniform CD-ROM driver Revision: 3.20 [ 1.438903] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.438942] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.439059] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC35 PQ: 0 ANSI: 5 [ 1.439142] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.439151] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.439178] sd 3:0:0:0: [sdb] Write Protect is off [ 1.439180] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.439203] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.439295] sdb: sdb1 sdb2 < sdb5 > [ 1.475557] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.475586] Freeing unused kernel memory: 880k freed [ 1.475826] Write protecting the kernel read-only data: 7696k [ 1.483432] usb 1-3: configuration #1 chosen from 1 choice [ 1.487259] udev: starting version 151 [ 1.504185] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.504267] atl1 0000:02:00.0: setting latency timer to 64 [ 1.504294] atl1 0000:02:00.0: version 2.1.3 [ 1.512138] Initializing USB Mass Storage driver... [ 1.513786] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.513823] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 1.514067] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.514148] usbcore: registered new interface driver usb-storage [ 1.514151] USB Mass Storage support registered. [ 1.515366] scsi5 : pata_jmicron [ 1.516742] usb-storage: device found at 4 [ 1.516743] usb-storage: waiting for device to settle before scanning [ 1.519274] scsi6 : pata_jmicron [ 1.520076] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 1.520079] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 1.520212] ahci 0000:03:00.0: version 3.0 [ 1.520226] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.530893] Floppy drive(s): fd0 is 1.44M [ 1.540076] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.540080] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.540087] ahci 0000:03:00.0: setting latency timer to 64 [ 1.540268] scsi7 : ahci [ 1.540364] scsi8 : ahci [ 1.540444] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16 [ 1.540448] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16 [ 1.547473] FDC 0 is a post-1991 82077 [ 1.734425] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 1.762521] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.882528] ata7: SATA link down (SStatus 0 SControl 300) [ 1.882564] ata8: SATA link down (SStatus 0 SControl 300) [ 1.931160] usb 3-1: configuration #1 chosen from 1 choice [ 1.939102] hub 3-1:1.0: USB hub found [ 1.940088] hub 3-1:1.0: 4 ports detected [ 2.222510] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 2.416159] usb 3-2: configuration #1 chosen from 1 choice [ 2.501091] usb 3-1.4: new low speed USB device using uhci_hcd and address 4 [ 2.652164] usb 3-1.4: configuration #1 chosen from 1 choice [ 6.510253] usb-storage: device scan complete [ 6.552446] scsi 4:0:0:0: Direct-Access ST310005 20AS PQ: 0 ANSI: 2 CCS [ 6.552876] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 6.553438] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 6.554178] sd 4:0:0:0: [sdc] Write Protect is off [ 6.554181] sd 4:0:0:0: [sdc] Mode Sense: 28 00 00 00 [ 6.554184] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 6.555677] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 6.555680] sdc: sdc1 [ 6.557547] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 6.557550] sd 4:0:0:0: [sdc] Attached SCSI disk [ 10.761996] udev: starting version 151 [ 10.770319] lp: driver loaded but no devices found [ 10.855304] usbcore: registered new interface driver hiddev [ 10.855988] Adding 11885560k swap on /dev/sdb5. Priority:-1 extents:1 across:11885560k [ 10.862018] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3 [ 10.862110] generic-usb 0003:1532:0101.0001: input,hidraw0: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.0-2/input0 [ 10.865235] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input4 [ 10.865352] generic-usb 0003:1532:0101.0002: input,hidraw1: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.0-2/input1 [ 10.875107] [drm] Initialized drm 1.1.0 20060810 [ 10.879149] input: Ideazon Zboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input5 [ 10.879208] generic-usb 0003:1038:0100.0003: input,hidraw2: USB HID v1.10 Keyboard [Ideazon Zboard] on usb-0000:00:1a.0-1.4/input0 [ 10.881487] cfg80211: Calling CRDA to update world regulatory domain [ 10.884959] cfg80211: World regulatory domain updated: [ 10.884961] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.884963] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.884965] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.884967] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.884968] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.884970] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.910258] generic-usb: probe of 0003:1038:0100.0004 failed with error -22 [ 10.910286] usbcore: registered new interface driver usbhid [ 10.910288] usbhid: v2.6:USB HID core driver [ 10.911445] rt61pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.924016] [drm] radeon defaulting to kernel modesetting. [ 10.924018] [drm] radeon kernel modesetting enabled. [ 10.924137] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.924141] radeon 0000:01:00.0: setting latency timer to 64 [ 10.926191] [drm] radeon: Initializing kernel modesetting. [ 10.926361] [drm] register mmio base: 0xFE8E0000 [ 10.926363] [drm] register mmio size: 65536 [ 10.926456] ATOM BIOS: 113 [ 10.926466] [drm] Clocks initialized ! [ 10.926484] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 10.926486] [drm] Detected VRAM RAM=256M, BAR=256M [ 10.926487] [drm] RAM width 256bits DDR [ 10.926518] [TTM] Zone kernel: Available graphics memory: 2028854 kiB. [ 10.926532] [drm] radeon: 256M of VRAM memory ready [ 10.926534] [drm] radeon: 512M of GTT memory ready. [ 10.926570] alloc irq_desc for 28 on node -1 [ 10.926572] alloc kstat_irqs on node -1 [ 10.926581] radeon 0000:01:00.0: irq 28 for MSI/MSI-X [ 10.926585] [drm] radeon: using MSI. [ 10.926609] [drm] radeon: irq initialized. [ 10.926611] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 10.927342] [drm] Loading RV670 Microcode [ 10.927345] platform radeon_cp.0: firmware: requesting radeon/RV670_pfp.bin [ 10.928756] phy0: Selected rate control algorithm 'minstrel' [ 10.929040] platform radeon_cp.0: firmware: requesting radeon/RV670_me.bin [ 10.929259] Registered led device: rt61pci-phy0::radio [ 10.929274] Registered led device: rt61pci-phy0::assoc [ 10.931266] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin [ 10.954365] type=1505 audit(1281649143.655:2): operation="profile_load" pid=689 name="/sbin/dhclient3" [ 10.954839] type=1505 audit(1281649143.655:3): operation="profile_load" pid=689 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.955091] type=1505 audit(1281649143.655:4): operation="profile_load" pid=689 name="/usr/lib/connman/scripts/dhclient-script" [ 10.962065] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.962103] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.966418] [drm] ring test succeeded in 1 usecs [ 10.966513] [drm] radeon: ib pool ready. [ 10.966581] [drm] ib test succeeded in 0 usecs [ 10.966583] [drm] Enabling audio support [ 10.966674] [drm] Default TV standard: NTSC [ 10.966729] [drm] Radeon Display Connectors [ 10.966730] [drm] Connector 0: [ 10.966731] [drm] DVI-I [ 10.966732] [drm] HPD1 [ 10.966733] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 10.966735] [drm] Encoders: [ 10.966736] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 10.966737] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 10.966738] [drm] Connector 1: [ 10.966739] [drm] DIN [ 10.966740] [drm] Encoders: [ 10.966741] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 10.966742] [drm] Connector 2: [ 10.966743] [drm] DVI-I [ 10.966744] [drm] HPD2 [ 10.966745] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 10.966747] [drm] Encoders: [ 10.966748] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 10.966749] [drm] DFP2: INTERNAL_LVTM1 [ 11.031187] ohci1394 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.094537] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[febf7800-febf7fff] Max Packet=[2048] IR/IT contexts=[4/8] [ 11.098950] [drm] fb mappable at 0xD0141000 [ 11.098956] [drm] vram apper at 0xD0000000 [ 11.098956] [drm] size 5299200 [ 11.098956] [drm] fb depth is 24 [ 11.098956] [drm] pitch is 5888 [ 11.099041] fb0: radeondrmfb frame buffer device [ 11.099042] registered panic notifier [ 11.099047] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 11.101824] hda_codec: ALC883: BIOS auto-probing. [ 11.101980] vga16fb: initializing [ 11.101982] vga16fb: mapped to 0xffff8800000a0000 [ 11.101984] vga16fb: not registering due to another framebuffer present [ 11.103178] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 11.112337] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.112381] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 11.122759] Console: switching to colour frame buffer device 180x56 [ 11.309075] type=1505 audit(1281649144.005:5): operation="profile_load" pid=937 name="/usr/share/gdm/guest-session/Xsession" [ 11.310168] type=1505 audit(1281649144.015:6): operation="profile_replace" pid=940 name="/sbin/dhclient3" [ 11.310649] type=1505 audit(1281649144.015:7): operation="profile_replace" pid=940 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.310953] type=1505 audit(1281649144.015:8): operation="profile_replace" pid=940 name="/usr/lib/connman/scripts/dhclient-script" [ 11.314527] type=1505 audit(1281649144.015:9): operation="profile_load" pid=945 name="/usr/bin/evince" [ 11.320661] type=1505 audit(1281649144.025:10): operation="profile_load" pid=945 name="/usr/bin/evince-previewer" [ 11.324412] type=1505 audit(1281649144.025:11): operation="profile_load" pid=945 name="/usr/bin/evince-thumbnailer" [ 11.333953] alloc irq_desc for 29 on node -1 [ 11.333956] alloc kstat_irqs on node -1 [ 11.333967] atl1 0000:02:00.0: irq 29 for MSI/MSI-X [ 11.334378] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.335360] rt61pci 0000:05:02.0: firmware: requesting rt2561s.bin [ 11.441753] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.430357] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000016b7c4] [ 12.430885] ppdev: user-space parallel port driver [ 13.938981] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 27.993614] UDF-fs: Partition marked readonly; forcing readonly mount [ 28.033817] UDF-fs INFO UDF: Mounting volume 'Metro 2033', timestamp 2010/02/25 16:02 (103c) [ 28.952581] wlan0: deauthenticating from 00:1f:33:d9:38:14 by local choice (reason=3) [ 28.952806] wlan0: direct probe to AP 00:1f:33:d9:38:14 (try 1) [ 28.956338] wlan0: direct probe responded [ 28.956341] wlan0: authenticate with AP 00:1f:33:d9:38:14 (try 1) [ 28.958062] wlan0: authenticated [ 28.958075] wlan0: associate with AP 00:1f:33:d9:38:14 (try 1) [ 28.960464] wlan0: RX AssocResp from 00:1f:33:d9:38:14 (capab=0x401 status=0 aid=8) [ 28.960467] wlan0: associated [ 28.961103] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 39.502506] wlan0: no IPv6 routers present