[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-19-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010 (Ubuntu 2.6.31-19.56-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) [ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007f6d0000 (usable) [ 0.000000] modified: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS) [ 0.000000] modified: 000000007f6e3000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 378a8000 - 37fefd00 [ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff4d00 [ 0.000000] Move RAMDISK from 00000000378a8000 - 0000000037fefcff to 008ad000 - 00ff4cff [ 0.000000] ACPI: RSDP 000f7040 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 7f6d7429 0008C (v01 LENOVO CB-01 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7f6dfc3a 000F4 (v03 LENOVO CB-01 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 7f6d92ae 06918 (v02 LENOVO CB-01 06040000 INTL 20060608) [ 0.000000] ACPI: FACS 7f6e2fc0 00040 [ 0.000000] ACPI: HPET 7f6dfd2e 00038 (v01 LENOVO CB-01 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 7f6dfd66 0003C (v01 LENOVO CB-01 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 7f6dfda2 00032 (v01 LENOVO CB-01 06040000 LOHR 0000005A) [ 0.000000] ACPI: TMOR 7f6dfdd4 00026 (v01 LENOVO CB-01 06040000 PTL 00000003) [ 0.000000] ACPI: SLIX 7f6dfdfa 00176 (v01 LENOVO CB-01 06040000 TBD 00000001) [ 0.000000] ACPI: APIC 7f6dff70 00068 (v01 LENOVO CB-01 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7f6dffd8 00028 (v01 LENOVO CB-01 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 7f6d8c5f 0064F (v01 SataRe SataPri 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 7f6d85cd 00692 (v01 SataRe SataSec 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 7f6d7a41 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7f6d799b 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7f6d74b5 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac160] BRK ==> [00008a9000 - 00008ac160] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0000ff4d00] NEW RAMDISK ==> [00008ad000 - 0000ff4d00] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f70c0] f70c0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007f6d0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f6d0 [ 0.000000] On node 0 totalpages: 521835 [ 0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292308 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1ffa000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517757 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic root=UUID=763fa76b-07f4-4c48-a667-fbd048e8631d ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10438720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6d0) [ 0.000000] Memory: 2043660k/2087744k available (4567k kernel code, 42804k reserved, 2141k data, 540k init, 1178440k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575c48 - 0xc078d408 (2141 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575c48 (4567 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1828.708 MHz processor. [ 0.001387] Console: colour VGA+ 80x25 [ 0.001391] console [tty0] enabled [ 0.001571] hpet clockevent registered [ 0.001574] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.001581] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.41 BogoMIPS (lpj=7314832) [ 0.001603] Security Framework initialized [ 0.001625] AppArmor: AppArmor initialized [ 0.001632] Mount-cache hash table entries: 512 [ 0.001776] Initializing cgroup subsys ns [ 0.001781] Initializing cgroup subsys cpuacct [ 0.001786] Initializing cgroup subsys memory [ 0.001793] Initializing cgroup subsys freezer [ 0.001795] Initializing cgroup subsys net_cls [ 0.001810] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001813] CPU: L2 cache: 2048K [ 0.001816] CPU: Physical Processor ID: 0 [ 0.001818] CPU: Processor Core ID: 0 [ 0.001822] mce: CPU supports 6 MCE banks [ 0.001830] CPU0: Thermal monitoring handled by SMI [ 0.001834] using mwait in idle threads. [ 0.001841] Performance Counters: Core2 events, Intel PMU driver. [ 0.001850] ... version: 2 [ 0.001852] ... bit width: 40 [ 0.001854] ... generic counters: 2 [ 0.001856] ... value mask: 000000ffffffffff [ 0.001858] ... max period: 000000007fffffff [ 0.001860] ... fixed-purpose counters: 3 [ 0.001862] ... counter mask: 0000000700000003 [ 0.001866] Checking 'hlt' instruction... OK. [ 0.018772] ACPI: Core revision 20090521 [ 0.032440] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072870] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3657.42 BogoMIPS (lpj=7314840) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.161624] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.161640] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164025] Brought up 2 CPUs [ 0.164028] Total of 2 processors activated (7314.83 BogoMIPS). [ 0.164079] CPU0 attaching sched-domain: [ 0.164082] domain 0: span 0-1 level MC [ 0.164085] groups: 0 1 [ 0.164091] CPU1 attaching sched-domain: [ 0.164093] domain 0: span 0-1 level MC [ 0.164096] groups: 1 0 [ 0.164180] Booting paravirtualized kernel on bare hardware [ 0.164222] regulator: core version 0.5 [ 0.164222] Time: 21:49:18 Date: 02/16/10 [ 0.164222] NET: Registered protocol family 16 [ 0.164231] EISA bus registered [ 0.164242] ACPI: bus type pci registered [ 0.164318] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.164322] PCI: MCFG area at e0000000 reserved in E820 [ 0.164324] PCI: Using MMCONFIG for extended config space [ 0.164326] PCI: Using configuration type 1 for base access [ 0.165438] bio: create slab at 0 [ 0.168949] ACPI: EC: Look up EC in DSDT [ 0.176098] ACPI: BIOS _OSI(Linux) query ignored [ 0.177236] ACPI: Interpreter enabled [ 0.177244] ACPI: (supports S0 S3 S4 S5) [ 0.177268] ACPI: Using IOAPIC for interrupt routing [ 0.220709] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.220712] ACPI: EC: driver started in poll mode [ 0.221207] ACPI: No dock devices found. [ 0.221863] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.221971] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8000000-0xf80fffff] [ 0.221981] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.221987] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.222037] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8100000-0xf81fffff] [ 0.222163] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.222232] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.222310] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8504000-0xf85043ff] [ 0.222379] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.222385] pci 0000:00:1a.7: PME# disabled [ 0.222442] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8300000-0xf8303fff] [ 0.222505] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.222511] pci 0000:00:1b.0: PME# disabled [ 0.222601] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.222606] pci 0000:00:1c.0: PME# disabled [ 0.222697] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.222703] pci 0000:00:1c.1: PME# disabled [ 0.222797] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.222802] pci 0000:00:1c.2: PME# disabled [ 0.222895] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.222900] pci 0000:00:1c.3: PME# disabled [ 0.222981] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.223069] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.223156] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.223236] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8504400-0xf85047ff] [ 0.223306] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.223312] pci 0000:00:1d.7: PME# disabled [ 0.223483] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.223487] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.223492] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.223497] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) [ 0.223504] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007) [ 0.223572] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.223580] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.223589] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.223597] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.223605] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ef] [ 0.223614] pci 0000:00:1f.2: reg 24 io port: [0x18d0-0x18df] [ 0.223645] pci 0000:00:1f.2: PME# supported from D3hot [ 0.223650] pci 0000:00:1f.2: PME# disabled [ 0.223678] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.223704] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.223795] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.223801] pci 0000:00:1c.0: bridge 32bit mmio: [0xc0000000-0xc3ffffff] [ 0.223810] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xcc000000-0xcdffffff] [ 0.224156] pci 0000:04:00.0: reg 10 64bit mmio: [0xf0000000-0xf0003fff] [ 0.224368] pci 0000:04:00.0: supports D1 D2 [ 0.224371] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.224382] pci 0000:04:00.0: PME# disabled [ 0.224519] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.224525] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.224533] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfa000000-0xfbffffff] [ 0.224597] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] [ 0.224602] pci 0000:00:1c.2: bridge 32bit mmio: [0xf4000000-0xf7ffffff] [ 0.224611] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfc000000-0xfdffffff] [ 0.224740] pci 0000:06:00.0: reg 10 64bit mmio: [0xb8000000-0xb800ffff] [ 0.224871] pci 0000:06:00.0: PME# supported from D3hot D3cold [ 0.224880] pci 0000:06:00.0: PME# disabled [ 0.224961] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] [ 0.224966] pci 0000:00:1c.3: bridge 32bit mmio: [0xb8000000-0xbbffffff] [ 0.224975] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xc8000000-0xc9ffffff] [ 0.225035] pci 0000:08:06.0: reg 10 32bit mmio: [0xf8200000-0xf82007ff] [ 0.225100] pci 0000:08:06.0: supports D1 D2 [ 0.225103] pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.225108] pci 0000:08:06.0: PME# disabled [ 0.225154] pci 0000:08:06.1: reg 10 32bit mmio: [0xf8200800-0xf82008ff] [ 0.225219] pci 0000:08:06.1: supports D1 D2 [ 0.225222] pci 0000:08:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.225227] pci 0000:08:06.1: PME# disabled [ 0.225273] pci 0000:08:06.2: reg 10 32bit mmio: [0xf8200c00-0xf8200cff] [ 0.225338] pci 0000:08:06.2: supports D1 D2 [ 0.225341] pci 0000:08:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.225346] pci 0000:08:06.2: PME# disabled [ 0.225393] pci 0000:08:06.3: reg 10 32bit mmio: [0xf8201000-0xf82010ff] [ 0.225457] pci 0000:08:06.3: supports D1 D2 [ 0.225460] pci 0000:08:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.225465] pci 0000:08:06.3: PME# disabled [ 0.225511] pci 0000:08:06.4: reg 10 32bit mmio: [0xf8201400-0xf82014ff] [ 0.225576] pci 0000:08:06.4: supports D1 D2 [ 0.225578] pci 0000:08:06.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.225584] pci 0000:08:06.4: PME# disabled [ 0.225647] pci 0000:00:1e.0: transparent bridge [ 0.225655] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8200000-0xf82fffff] [ 0.225694] pci_bus 0000:00: on NUMA node 0 [ 0.225699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.225927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.226020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.226113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.226196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.226317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.237826] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.237948] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.238065] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.238180] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.238294] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.238410] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.238524] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.238639] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.238846] SCSI subsystem initialized [ 0.238882] libata version 3.00 loaded. [ 0.238882] usbcore: registered new interface driver usbfs [ 0.238882] usbcore: registered new interface driver hub [ 0.238882] usbcore: registered new device driver usb [ 0.238882] ACPI: WMI: Mapper loaded [ 0.238882] PCI: Using ACPI for IRQ routing [ 0.248008] Bluetooth: Core ver 2.15 [ 0.248024] NET: Registered protocol family 31 [ 0.248024] Bluetooth: HCI device and connection manager initialized [ 0.248024] Bluetooth: HCI socket layer initialized [ 0.248024] NetLabel: Initializing [ 0.248024] NetLabel: domain hash size = 128 [ 0.248024] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.248036] NetLabel: unlabeled traffic allowed by default [ 0.248068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.248074] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.264008] pnp: PnP ACPI init [ 0.264020] ACPI: bus type pnp registered [ 0.284159] pnp: PnP ACPI: found 10 devices [ 0.284161] ACPI: ACPI bus type pnp unregistered [ 0.284165] PnPBIOS: Disabled by ACPI PNP [ 0.284182] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.284186] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.284189] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.284193] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.284196] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.284199] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.284202] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.284206] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.284213] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.284221] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.284224] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.284227] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.284231] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.284234] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 0.284237] system 00:06: ioport range 0xff00-0xff7f has been reserved [ 0.318908] AppArmor: AppArmor Filesystem Enabled [ 0.318985] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.318989] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.318996] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc3ffffff [ 0.319002] pci 0000:00:1c.0: PREFETCH window: 0x000000cc000000-0x000000cdffffff [ 0.319011] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 0.319015] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.319021] pci 0000:00:1c.1: MEM window: 0xf0000000-0xf3ffffff [ 0.319027] pci 0000:00:1c.1: PREFETCH window: 0x000000fa000000-0x000000fbffffff [ 0.319035] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 [ 0.319039] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.319046] pci 0000:00:1c.2: MEM window: 0xf4000000-0xf7ffffff [ 0.319051] pci 0000:00:1c.2: PREFETCH window: 0x000000fc000000-0x000000fdffffff [ 0.319060] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 0.319064] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 0.319071] pci 0000:00:1c.3: MEM window: 0xb8000000-0xbbffffff [ 0.319077] pci 0000:00:1c.3: PREFETCH window: 0x000000c8000000-0x000000c9ffffff [ 0.319085] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.319087] pci 0000:00:1e.0: IO window: disabled [ 0.319094] pci 0000:00:1e.0: MEM window: 0xf8200000-0xf82fffff [ 0.319100] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.319113] alloc irq_desc for 17 on node -1 [ 0.319115] alloc kstat_irqs on node -1 [ 0.319121] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.319127] pci 0000:00:1c.0: setting latency timer to 64 [ 0.319136] alloc irq_desc for 16 on node -1 [ 0.319138] alloc kstat_irqs on node -1 [ 0.319142] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.319148] pci 0000:00:1c.1: setting latency timer to 64 [ 0.319157] alloc irq_desc for 18 on node -1 [ 0.319159] alloc kstat_irqs on node -1 [ 0.319163] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.319168] pci 0000:00:1c.2: setting latency timer to 64 [ 0.319177] alloc irq_desc for 19 on node -1 [ 0.319179] alloc kstat_irqs on node -1 [ 0.319182] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.319187] pci 0000:00:1c.3: setting latency timer to 64 [ 0.319196] pci 0000:00:1e.0: setting latency timer to 64 [ 0.319201] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.319204] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.319207] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.319210] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc3ffffff] [ 0.319213] pci_bus 0000:02: resource 2 pref mem [0xcc000000-0xcdffffff] [ 0.319216] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff] [ 0.319219] pci_bus 0000:04: resource 1 mem: [0xf0000000-0xf3ffffff] [ 0.319221] pci_bus 0000:04: resource 2 pref mem [0xfa000000-0xfbffffff] [ 0.319224] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff] [ 0.319227] pci_bus 0000:05: resource 1 mem: [0xf4000000-0xf7ffffff] [ 0.319230] pci_bus 0000:05: resource 2 pref mem [0xfc000000-0xfdffffff] [ 0.319233] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff] [ 0.319236] pci_bus 0000:06: resource 1 mem: [0xb8000000-0xbbffffff] [ 0.319238] pci_bus 0000:06: resource 2 pref mem [0xc8000000-0xc9ffffff] [ 0.319241] pci_bus 0000:08: resource 1 mem: [0xf8200000-0xf82fffff] [ 0.319244] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 0.319247] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] [ 0.319286] NET: Registered protocol family 2 [ 0.319390] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.319741] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.320277] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.320539] TCP: Hash tables configured (established 131072 bind 65536) [ 0.320542] TCP reno registered [ 0.320621] NET: Registered protocol family 1 [ 0.320689] Trying to unpack rootfs image as initramfs... [ 0.501675] Switched to high resolution mode on CPU 1 [ 0.504002] Switched to high resolution mode on CPU 0 [ 0.525513] Freeing initrd memory: 7455k freed [ 0.530341] Simple Boot Flag at 0x37 set to 0x1 [ 0.530547] cpufreq-nforce2: No nForce2 chipset. [ 0.530577] Scanning for low memory corruption every 60 seconds [ 0.530695] audit: initializing netlink socket (disabled) [ 0.530714] type=2000 audit(1266356958.528:1): initialized [ 0.540188] highmem bounce pool size: 64 pages [ 0.540193] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.541803] VFS: Disk quotas dquot_6.5.2 [ 0.541871] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.542458] fuse init (API version 7.12) [ 0.542548] msgmni has been set to 1706 [ 0.542777] alg: No test for stdrng (krng) [ 0.542792] io scheduler noop registered [ 0.542794] io scheduler anticipatory registered [ 0.542797] io scheduler deadline registered [ 0.542844] io scheduler cfq registered (default) [ 0.542858] pci 0000:00:02.0: Boot video device [ 0.543172] alloc irq_desc for 24 on node -1 [ 0.543175] alloc kstat_irqs on node -1 [ 0.543189] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.543202] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.543374] alloc irq_desc for 25 on node -1 [ 0.543376] alloc kstat_irqs on node -1 [ 0.543386] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.543398] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.543574] alloc irq_desc for 26 on node -1 [ 0.543576] alloc kstat_irqs on node -1 [ 0.543586] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.543598] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.543769] alloc irq_desc for 27 on node -1 [ 0.543771] alloc kstat_irqs on node -1 [ 0.543781] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.543793] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.543920] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.544086] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.546086] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.554014] ACPI: AC Adapter [ACAD] (on-line) [ 0.554082] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.554087] ACPI: Power Button [PWRF] [ 0.554169] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.554219] ACPI: Lid Switch [LID0] [ 0.554268] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.554271] ACPI: Power Button [PWRB] [ 0.554316] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 0.554319] ACPI: Sleep Button [SLPB] [ 0.555064] ACPI: SSDT 7f6d830f 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.555664] ACPI: SSDT 7f6d7ca0 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.558422] Monitor-Mwait will be used to enter C-1 state [ 0.558455] Monitor-Mwait will be used to enter C-2 state [ 0.558477] Monitor-Mwait will be used to enter C-3 state [ 0.558486] Marking TSC unstable due to TSC halts in idle [ 0.558513] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.558553] processor LNXCPU:00: registered as cooling_device0 [ 0.558558] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.558967] ACPI: SSDT 7f6d8505 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.559381] ACPI: SSDT 7f6d828a 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.560737] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.560770] processor LNXCPU:01: registered as cooling_device1 [ 0.560776] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.587236] ACPI: Invalid passive threshold [ 0.587280] ACPI: Invalid active0 threshold [ 0.591227] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.591237] ACPI: Thermal Zone [TZ00] (33 C) [ 0.591306] isapnp: Scanning for PnP cards... [ 0.773812] ACPI: Battery Slot [BAT1] (battery present) [ 0.947855] isapnp: No Plug & Play device found [ 0.949154] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.950569] brd: module loaded [ 0.951058] loop: module loaded [ 0.951133] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.951253] ata_piix 0000:00:1f.2: version 2.13 [ 0.951269] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.951276] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 1.104025] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.104110] scsi0 : ata_piix [ 1.104202] scsi1 : ata_piix [ 1.105308] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 [ 1.105311] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 [ 1.106306] Fixed MDIO Bus: probed [ 1.106343] PPP generic driver version 2.4.2 [ 1.106431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.106451] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.106463] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.106467] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.106515] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.110424] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.110432] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.110447] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504000 [ 1.124020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.124093] usb usb1: configuration #1 chosen from 1 choice [ 1.124126] hub 1-0:1.0: USB hub found [ 1.124133] hub 1-0:1.0: 4 ports detected [ 1.124195] alloc irq_desc for 23 on node -1 [ 1.124197] alloc kstat_irqs on node -1 [ 1.124203] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.124214] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.124218] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.124250] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.128150] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.128157] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.128171] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8504400 [ 1.140019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.140095] usb usb2: configuration #1 chosen from 1 choice [ 1.140125] hub 2-0:1.0: USB hub found [ 1.140132] hub 2-0:1.0: 6 ports detected [ 1.140197] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.140216] uhci_hcd: USB Universal Host Controller Interface driver [ 1.140238] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.140246] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.140250] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.140286] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.140325] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 1.140409] usb usb3: configuration #1 chosen from 1 choice [ 1.140437] hub 3-0:1.0: USB hub found [ 1.140444] hub 3-0:1.0: 2 ports detected [ 1.140496] alloc irq_desc for 21 on node -1 [ 1.140498] alloc kstat_irqs on node -1 [ 1.140502] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.140509] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.140513] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.140545] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.140581] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 1.140663] usb usb4: configuration #1 chosen from 1 choice [ 1.140691] hub 4-0:1.0: USB hub found [ 1.140698] hub 4-0:1.0: 2 ports detected [ 1.140752] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.140761] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.140765] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.140797] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.140825] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 1.140907] usb usb5: configuration #1 chosen from 1 choice [ 1.140935] hub 5-0:1.0: USB hub found [ 1.140942] hub 5-0:1.0: 2 ports detected [ 1.140992] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.141010] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.141014] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.141047] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.141086] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 1.141169] usb usb6: configuration #1 chosen from 1 choice [ 1.141197] hub 6-0:1.0: USB hub found [ 1.141203] hub 6-0:1.0: 2 ports detected [ 1.141255] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.141262] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.141266] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.141300] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.141330] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 1.141410] usb usb7: configuration #1 chosen from 1 choice [ 1.141438] hub 7-0:1.0: USB hub found [ 1.141445] hub 7-0:1.0: 2 ports detected [ 1.141553] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.171892] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.171898] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.171960] mice: PS/2 mouse device common for all mice [ 1.172107] rtc_cmos 00:07: RTC can wake from S4 [ 1.172142] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.172176] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.172275] device-mapper: uevent: version 1.0.3 [ 1.172360] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.172423] device-mapper: multipath: version 1.1.0 loaded [ 1.172426] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.172537] EISA: Probing bus 0 at eisa.0 [ 1.172544] Cannot allocate resource for EISA slot 1 [ 1.172547] Cannot allocate resource for EISA slot 2 [ 1.172549] Cannot allocate resource for EISA slot 3 [ 1.172551] Cannot allocate resource for EISA slot 4 [ 1.172554] Cannot allocate resource for EISA slot 5 [ 1.172569] EISA: Detected 0 cards. [ 1.172720] cpuidle: using governor ladder [ 1.173988] cpuidle: using governor menu [ 1.174521] TCP cubic registered [ 1.174683] NET: Registered protocol family 10 [ 1.175178] lo: Disabled Privacy Extensions [ 1.175555] NET: Registered protocol family 17 [ 1.175572] Bluetooth: L2CAP ver 2.13 [ 1.175574] Bluetooth: L2CAP socket layer initialized [ 1.175577] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.175579] Bluetooth: SCO socket layer initialized [ 1.175604] Bluetooth: RFCOMM TTY layer initialized [ 1.175608] Bluetooth: RFCOMM socket layer initialized [ 1.175610] Bluetooth: RFCOMM ver 1.11 [ 1.176530] Using IPI No-Shortcut mode [ 1.176619] PM: Resume from disk failed. [ 1.176632] registered taskstats version 1 [ 1.176770] Magic number: 14:193:854 [ 1.176870] rtc_cmos 00:07: setting system clock to 2010-02-16 21:49:19 UTC (1266356959) [ 1.176873] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.176875] EDD information not available. [ 1.194977] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.268547] ata2.00: ATAPI: Optiarc DVD RW AD-7560A, D803, max UDMA/33 [ 1.276492] ata1.00: ATA-8: ST9160827AS, 3.AAB, max UDMA/133 [ 1.276496] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.284437] ata2.00: configured for UDMA/33 [ 1.292409] ata1.00: configured for UDMA/133 [ 1.292541] scsi 0:0:0:0: Direct-Access ATA ST9160827AS 3.AA PQ: 0 ANSI: 5 [ 1.292663] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.292702] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.292751] sd 0:0:0:0: [sda] Write Protect is off [ 1.292754] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.292780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.292910] sda: [ 1.294017] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7560A D803 PQ: 0 ANSI: 5 [ 1.299381] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.299386] Uniform CD-ROM driver Revision: 3.20 [ 1.299526] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.299600] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.337920] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3 [ 1.408184] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.408237] Freeing unused kernel memory: 540k freed [ 1.408563] Write protecting the kernel text: 4568k [ 1.408624] Write protecting the kernel read-only data: 1836k [ 1.500014] Clocksource tsc unstable (delta = -105389866 ns) [ 1.553911] Linux agpgart interface v0.103 [ 1.557776] tg3.c:v3.99 (April 20, 2009) [ 1.557838] tg3 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.557850] tg3 0000:06:00.0: setting latency timer to 64 [ 1.560637] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.561244] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 1.570450] tg3 0000:06:00.0: PME# disabled [ 1.588076] b43-pci-bridge 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.588095] b43-pci-bridge 0000:04:00.0: setting latency timer to 64 [ 1.593808] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.627596] alloc irq_desc for 22 on node -1 [ 1.627600] alloc kstat_irqs on node -1 [ 1.627607] ohci1394 0000:08:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.652058] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 1.669419] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0 [ 1.671601] [drm] Initialized drm 1.1.0 20060810 [ 1.683982] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.683988] i915 0000:00:02.0: setting latency timer to 64 [ 1.686414] alloc irq_desc for 28 on node -1 [ 1.686418] alloc kstat_irqs on node -1 [ 1.686430] i915 0000:00:02.0: irq 28 for MSI/MSI-X [ 1.689729] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8200000-f82007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.794364] usb 2-4: configuration #1 chosen from 1 choice [ 1.979589] eth0: Tigon3 [partno(BCM95751) rev b002] (PCI Express) MAC address 00:1e:ec:62:a3:a7 [ 1.979594] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.979597] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.979600] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.089038] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 2.195077] [drm] TV-14: set mode NTSC 480i 0 [ 2.321314] [drm] fb0: inteldrmfb frame buffer device [ 2.343671] acpi device:0b: registered as cooling_device2 [ 2.343959] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/input/input6 [ 2.343994] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.344045] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.345602] usb 5-1: configuration #1 chosen from 1 choice [ 2.400157] Initializing USB Mass Storage driver... [ 2.415528] [drm] LVDS-8: set mode 1280x800 17 [ 2.585034] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 2.598900] scsi2 : SCSI emulation for USB Mass Storage devices [ 2.598991] usbcore: registered new interface driver usb-storage [ 2.598995] USB Mass Storage support registered. [ 2.599230] usb-storage: device found at 2 [ 2.599231] usb-storage: waiting for device to settle before scanning [ 2.646008] Console: switching to colour frame buffer device 160x50 [ 2.756229] usb 6-1: configuration #1 chosen from 1 choice [ 2.764707] usbcore: registered new interface driver hiddev [ 2.778412] input: DELL Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input7 [ 2.778499] generic-usb 0003:0461:4D51.0001: input,hidraw0: USB HID v1.11 Mouse [DELL Laser Mouse] on usb-0000:00:1d.1-1/input0 [ 2.778518] usbcore: registered new interface driver usbhid [ 2.778521] usbhid: v2.6:USB HID core driver [ 3.008016] usb 7-1: new low speed USB device using uhci_hcd and address 2 [ 3.033497] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f86df400f8b] [ 3.071883] PM: Starting manual resume from disk [ 3.071887] PM: Resume from partition 8:7 [ 3.071889] PM: Checking hibernation image. [ 3.072059] PM: Resume from disk failed. [ 3.091449] EXT4-fs (sda6): barriers enabled [ 3.104093] kjournald2 starting: pid 430, dev sda6:8, commit interval 5 seconds [ 3.104130] EXT4-fs (sda6): delayed allocation enabled [ 3.104137] EXT4-fs: file extents enabled [ 3.105387] EXT4-fs: mballoc enabled [ 3.105405] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 3.186536] usb 7-1: configuration #1 chosen from 1 choice [ 3.203752] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input8 [ 3.203824] generic-usb 0003:0E8F:0020.0002: input,hidraw1: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1d.2-1/input0 [ 3.229033] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.1/input/input9 [ 3.229122] generic-usb 0003:0E8F:0020.0003: input,hidraw2: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:1d.2-1/input1 [ 3.468142] usb 5-1: USB disconnect, address 2 [ 3.708098] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 3.770000] type=1505 audit(1266356962.091:2): operation="profile_load" pid=460 name=/usr/share/gdm/guest-session/Xsession [ 3.784281] type=1505 audit(1266356962.107:3): operation="profile_load" pid=461 name=/sbin/dhclient3 [ 3.785081] type=1505 audit(1266356962.107:4): operation="profile_load" pid=461 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.785515] type=1505 audit(1266356962.107:5): operation="profile_load" pid=461 name=/usr/lib/connman/scripts/dhclient-script [ 3.838252] type=1505 audit(1266356962.159:6): operation="profile_load" pid=462 name=/usr/bin/evince [ 3.851190] type=1505 audit(1266356962.172:7): operation="profile_load" pid=462 name=/usr/bin/evince-previewer [ 3.858765] type=1505 audit(1266356962.179:8): operation="profile_load" pid=462 name=/usr/bin/evince-thumbnailer [ 3.873094] usb 5-1: configuration #1 chosen from 1 choice [ 3.885926] scsi6 : SCSI emulation for USB Mass Storage devices [ 3.886084] usb-storage: device found at 3 [ 3.886087] usb-storage: waiting for device to settle before scanning [ 3.889337] type=1505 audit(1266356962.211:9): operation="profile_load" pid=464 name=/usr/lib/cups/backend/cups-pdf [ 5.073267] Adding 2000052k swap on /dev/sda7. Priority:-1 extents:1 across:2000052k [ 5.275748] EXT4-fs (sda6): internal journal on sda6:8 [ 6.168960] udev: starting version 147 [ 7.632847] lp: driver loaded but no devices found [ 8.063125] Linux video capture interface: v2.00 [ 8.087696] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b008) [ 8.090418] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10 [ 8.090499] usbcore: registered new interface driver uvcvideo [ 8.090503] USB Video Class driver (v0.1.0) [ 8.132958] ricoh-mmc: Ricoh MMC Controller disabling driver [ 8.132961] ricoh-mmc: Copyright(c) Philip Langdale [ 8.132995] ricoh-mmc: Ricoh MMC controller found at 0000:08:06.2 [1180:0843] (rev 12) [ 8.133030] ricoh-mmc: Controller is now disabled. [ 8.161425] usbcore: registered new interface driver usbserial [ 8.161441] USB Serial support registered for generic [ 8.161491] usbcore: registered new interface driver usbserial_generic [ 8.161494] usbserial: USB Serial Driver core [ 8.303986] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.356746] sdhci: Secure Digital Host Controller Interface driver [ 8.356749] sdhci: Copyright(c) Pierre Ossman [ 8.431151] USB Serial support registered for GSM modem (1-port) [ 8.431212] option 5-1:1.0: GSM modem (1-port) converter detected [ 8.431307] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 8.431319] option 5-1:1.1: GSM modem (1-port) converter detected [ 8.431369] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 8.431384] option 5-1:1.2: GSM modem (1-port) converter detected [ 8.431432] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 8.431451] usbcore: registered new interface driver option [ 8.431453] option: v0.7.2:USB Driver for GSM modems [ 8.433019] sdhci-pci 0000:08:06.1: SDHCI controller found [1180:0822] (rev 22) [ 8.433039] sdhci-pci 0000:08:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 8.435093] Registered led device: mmc0:: [ 8.436142] mmc0: SDHCI controller on PCI [0000:08:06.1] using PIO [ 8.886971] usb-storage: device scan complete [ 8.889958] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 0 [ 8.892968] scsi 6:0:0:1: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 8.915924] sr1: scsi-1 drive [ 8.916145] sr 6:0:0:0: Attached scsi CD-ROM sr1 [ 8.916230] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 8.916352] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 8.934925] sd 6:0:0:1: [sdb] Attached SCSI removable disk [ 9.005735] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input11 [ 9.041172] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input12 [ 9.183833] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.183863] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.477553] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13 [ 12.716867] __ratelimit: 12 callbacks suppressed [ 12.716871] type=1505 audit(1266337171.036:14): operation="profile_replace" pid=1023 name=/usr/share/gdm/guest-session/Xsession [ 12.718916] type=1505 audit(1266337171.040:15): operation="profile_replace" pid=1026 name=/sbin/dhclient3 [ 12.719720] type=1505 audit(1266337171.040:16): operation="profile_replace" pid=1026 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 12.720179] type=1505 audit(1266337171.040:17): operation="profile_replace" pid=1026 name=/usr/lib/connman/scripts/dhclient-script [ 12.726940] type=1505 audit(1266337171.048:18): operation="profile_replace" pid=1028 name=/usr/bin/evince [ 12.740849] type=1505 audit(1266337171.060:19): operation="profile_replace" pid=1028 name=/usr/bin/evince-previewer [ 12.748819] type=1505 audit(1266337171.068:20): operation="profile_replace" pid=1028 name=/usr/bin/evince-thumbnailer [ 12.759402] type=1505 audit(1266337171.080:21): operation="profile_replace" pid=1030 name=/usr/lib/cups/backend/cups-pdf [ 12.760346] type=1505 audit(1266337171.080:22): operation="profile_replace" pid=1030 name=/usr/sbin/cupsd [ 12.763105] type=1505 audit(1266337171.084:23): operation="profile_replace" pid=1031 name=/usr/sbin/mysqld [ 14.011944] tg3 0000:06:00.0: PME# disabled [ 14.012360] alloc irq_desc for 29 on node -1 [ 14.012363] alloc kstat_irqs on node -1 [ 14.012387] tg3 0000:06:00.0: irq 29 for MSI/MSI-X [ 14.082781] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.955810] __ratelimit: 12 callbacks suppressed [ 18.955814] type=1503 audit(1266337177.275:28): operation="open" pid=1428 parent=1302 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 19.208529] type=1503 audit(1266337177.531:29): operation="open" pid=1434 parent=1433 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 20.223559] type=1503 audit(1266337178.543:30): operation="open" pid=1448 parent=1447 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 20.611862] [drm] TV-14: set mode NTSC 480i 0 [ 20.752173] [drm] TV-14: set mode NTSC 480i 0 [ 21.100605] [drm] TV-14: set mode NTSC 480i 0 [ 21.240812] [drm] TV-14: set mode NTSC 480i 0 [ 21.890309] type=1503 audit(1266337180.211:31): operation="open" pid=1474 parent=1473 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 22.050704] type=1503 audit(1266337180.372:32): operation="open" pid=1485 parent=1484 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 27.495289] ppdev: user-space parallel port driver [ 29.976557] [drm] TV-14: set mode NTSC 480i 0 [ 30.118142] [drm] TV-14: set mode NTSC 480i 0 [ 30.379954] [drm] TV-14: set mode NTSC 480i 0 [ 30.520739] [drm] TV-14: set mode NTSC 480i 0 [ 30.804252] [drm] TV-14: set mode NTSC 480i 0 [ 30.946745] [drm] TV-14: set mode NTSC 480i 0 [ 62.892424] [drm] TV-14: set mode NTSC 480i 0 [ 63.033468] [drm] TV-14: set mode NTSC 480i 0 [ 63.339391] [drm] TV-14: set mode NTSC 480i 0 [ 63.479619] [drm] TV-14: set mode NTSC 480i 0 [ 63.755691] [drm] TV-14: set mode NTSC 480i 0 [ 63.898036] [drm] TV-14: set mode NTSC 480i 0 [ 65.476183] [drm] TV-14: set mode NTSC 480i 0 [ 65.616268] [drm] TV-14: set mode NTSC 480i 0 [ 75.794103] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 75.807116] ISOFS: changing to secondary root [ 182.681217] usb 5-1: USB disconnect, address 3 [ 182.682209] option: option_instat_callback: error -108 [ 182.682437] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 182.682480] option 5-1:1.0: device disconnected [ 182.682626] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 182.682661] option 5-1:1.1: device disconnected [ 182.682799] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 182.682832] option 5-1:1.2: device disconnected [ 182.683042] VFS: busy inodes on changed media or resized disk sr1 [ 182.721227] scsi 6:0:0:0: rejecting I/O to dead device [ 188.412157] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 188.571433] usb 5-1: configuration #1 chosen from 1 choice [ 188.578219] scsi7 : SCSI emulation for USB Mass Storage devices [ 188.578543] usb-storage: device found at 4 [ 188.578548] usb-storage: waiting for device to settle before scanning [ 188.820238] usb 5-1: USB disconnect, address 4 [ 189.060590] usb 5-1: new full speed USB device using uhci_hcd and address 5 [ 189.224415] usb 5-1: configuration #1 chosen from 1 choice [ 189.237211] option 5-1:1.0: GSM modem (1-port) converter detected [ 189.237362] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 189.247902] option 5-1:1.1: GSM modem (1-port) converter detected [ 189.248084] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 189.263372] option 5-1:1.2: GSM modem (1-port) converter detected [ 189.263468] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 189.265164] scsi11 : SCSI emulation for USB Mass Storage devices [ 189.265314] usb-storage: device found at 5 [ 189.265316] usb-storage: waiting for device to settle before scanning [ 194.265169] usb-storage: device scan complete [ 194.268165] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 0 [ 194.271046] scsi 11:0:0:1: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 194.302083] sr1: scsi-1 drive [ 194.302309] sr 11:0:0:0: Attached scsi CD-ROM sr1 [ 194.302440] sr 11:0:0:0: Attached scsi generic sg2 type 5 [ 194.302672] sd 11:0:0:1: Attached scsi generic sg3 type 0 [ 194.323008] sd 11:0:0:1: [sdb] Attached SCSI removable disk [ 197.575966] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 197.581892] ISOFS: changing to secondary root [ 199.958403] PPP BSD Compression module registered [ 199.988390] PPP Deflate Compression module registered