[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-16-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009 (Ubuntu 2.6.31-16.53-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=b7269771-9713-4cca-b92d-a664978427b6 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable) [ 0.000000] BIOS-e820: 00000000bffa0000 - 00000000bffaf000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffaf000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbffa0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e1000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bffa0000 (usable) [ 0.000000] modified: 00000000bffa0000 - 00000000bffaf000 (ACPI data) [ 0.000000] modified: 00000000bffaf000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] modified: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffa0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bffa0000 page 4k [ 0.000000] kernel direct mapping tables up to bffa0000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000 [ 0.000000] RAMDISK: 3781a000 - 37fef58c [ 0.000000] ACPI: RSDP 00000000000f9500 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bffa0100 0007C (v01 _ASUS_ Notebook 20090421 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bffa0290 000F4 (v03 042109 FACP1057 20090421 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bffa0690 0B845 (v01 G50V0 G50V0100 00000100 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bffaf000 00040 [ 0.000000] ACPI: APIC 00000000bffa0390 0006C (v01 042109 APIC1057 20090421 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bffa0440 0003C (v01 042109 OEMMCFG 20090421 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000bffa0480 00176 (v01 _ASUS_ Notebook 20090421 MSFT 00000097) [ 0.000000] ACPI: ECDT 00000000bffa0630 00054 (v01 042109 OEMECDT 20090421 MSFT 00000097) [ 0.000000] ACPI: DBGP 00000000bffa0400 00034 (v01 042109 DBGP1057 20090421 MSFT 00000097) [ 0.000000] ACPI: BOOT 00000000bffa0600 00028 (v01 042109 BOOT1057 20090421 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bffaf040 00071 (v01 042109 OEMB1057 20090421 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bffabee0 00038 (v01 042109 OEMHPET 20090421 MSFT 00000097) [ 0.000000] ACPI: ATKG 00000000bffaf2c0 08024 (v01 042109 OEMATKG 20090421 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bffb7e10 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [0000000000014000 - 0000000000018fff] [ 0.000000] bootmap [0000000000019000 - 0000000000040fff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e4ccc] TEXT DATA BSS ==> [0001000000 - 00019e4ccc] [ 0.000000] #3 [003781a000 - 0037fef58c] RAMDISK ==> [003781a000 - 0037fef58c] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [00019e5000 - 00019e5334] BRK ==> [00019e5000 - 00019e5334] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bffa0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048366 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3822 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767960 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000 [ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffa0000 - 00000000bffaf000 [ 0.000000] PM: Registered nosave memory: 00000000bffaf000 - 00000000bffe0000 [ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030342 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=b7269771-9713-4cca-b92d-a664978427b6 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4051292k/5242880k available (5315k kernel code, 1049416k absent, 142172k reserved, 3018k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2526.785 MHz processor. [ 0.006221] Console: colour VGA+ 80x25 [ 0.006224] console [tty0] enabled [ 0.010000] allocated 41943040 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.57 BogoMIPS (lpj=25267850) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU0: Thermal monitoring enabled (TM2) [ 0.010000] using mwait in idle threads. [ 0.010000] Performance Counters: Core2 events, Intel PMU driver. [ 0.010000] ... version: 2 [ 0.010000] ... bit width: 40 [ 0.010000] ... generic counters: 2 [ 0.010000] ... value mask: 000000ffffffffff [ 0.010000] ... max period: 000000007fffffff [ 0.010000] ... fixed-purpose counters: 3 [ 0.010000] ... counter mask: 0000000700000003 [ 0.010000] ACPI: Core revision 20090521 [ 0.030055] Setting APIC routing to flat [ 0.030401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.130330] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 [ 0.140000] APIC calibration not consistent with PM-Timer: 130ms instead of 100ms [ 0.140000] APIC delta adjusted to PM-Timer: 1662492 (2161248) [ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 5054.00 BogoMIPS (lpj=25270022) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU1: Thermal monitoring enabled (TM2) [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.291728] CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 [ 0.291737] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.300022] Brought up 2 CPUs [ 0.300025] Total of 2 processors activated (10107.57 BogoMIPS). [ 0.300076] CPU0 attaching sched-domain: [ 0.300079] domain 0: span 0-1 level MC [ 0.300081] groups: 0 1 [ 0.300085] CPU1 attaching sched-domain: [ 0.300087] domain 0: span 0-1 level MC [ 0.300088] groups: 1 0 [ 0.300152] Booting paravirtualized kernel on bare hardware [ 0.300152] regulator: core version 0.5 [ 0.300152] Time: 9:58:48 Date: 01/04/10 [ 0.300152] NET: Registered protocol family 16 [ 0.300186] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.300189] ACPI: bus type pci registered [ 0.300252] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.300254] PCI: Not using MMCONFIG. [ 0.300256] PCI: Using configuration type 1 for base access [ 0.300958] bio: create slab at 0 [ 0.301053] ACPI: EC: EC description table is found, configuring boot EC [ 0.301061] ACPI: EC: Look up EC in DSDT [ 0.305778] ACPI: BIOS _OSI(Linux) query ignored [ 0.312741] ACPI: Interpreter enabled [ 0.312744] ACPI: (supports S0 S1 S3 S4 S5) [ 0.312767] ACPI: Using IOAPIC for interrupt routing [ 0.312850] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.315016] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.325076] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.333875] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62 [ 0.333878] ACPI: EC: driver started in poll mode [ 0.336533] ACPI Warning: Incorrect checksum in table [ATKG] - BE, should be DD 20090521 tbutils-246 [ 0.336731] ACPI: No dock devices found. [ 0.337219] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.337308] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.337311] pci 0000:00:01.0: PME# disabled [ 0.337411] pci 0000:00:1a.0: reg 20 io port: [0xbc00-0xbc1f] [ 0.337507] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] [ 0.337605] pci 0000:00:1a.2: reg 20 io port: [0xb800-0xb81f] [ 0.337701] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff] [ 0.337770] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.337775] pci 0000:00:1a.7: PME# disabled [ 0.337831] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff] [ 0.337892] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.337897] pci 0000:00:1b.0: PME# disabled [ 0.337981] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.337986] pci 0000:00:1c.0: PME# disabled [ 0.338073] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.338078] pci 0000:00:1c.1: PME# disabled [ 0.338165] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.338170] pci 0000:00:1c.2: PME# disabled [ 0.338260] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.338265] pci 0000:00:1c.5: PME# disabled [ 0.338341] pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f] [ 0.338437] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] [ 0.338533] pci 0000:00:1d.2: reg 20 io port: [0xb080-0xb09f] [ 0.338629] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff] [ 0.338698] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.338702] pci 0000:00:1d.7: PME# disabled [ 0.338945] pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007] [ 0.338953] pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03] [ 0.338960] pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887] [ 0.338967] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803] [ 0.338975] pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa49f] [ 0.338982] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf9fff000-0xf9fff7ff] [ 0.339029] pci 0000:00:1f.2: PME# supported from D3hot [ 0.339033] pci 0000:00:1f.2: PME# disabled [ 0.339126] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.339147] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.339167] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.339181] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 0.339195] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.339318] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.339320] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfdefffff] [ 0.339324] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.339509] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdffe000-0xfdffffff] [ 0.339639] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.339653] pci 0000:03:00.0: PME# disabled [ 0.339747] pci 0000:00:1c.1: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.339813] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] [ 0.339817] pci 0000:00:1c.2: bridge 32bit mmio: [0xfe000000-0xfe9fffff] [ 0.339825] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf6000000-0xf8efffff] [ 0.339990] pci 0000:06:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.340070] pci 0000:06:00.0: reg 18 64bit mmio: [0xf8fff000-0xf8ffffff] [ 0.340116] pci 0000:06:00.0: reg 20 64bit mmio: [0xf8fe0000-0xf8feffff] [ 0.340143] pci 0000:06:00.0: reg 30 32bit mmio: [0xfeaf0000-0xfeafffff] [ 0.340299] pci 0000:06:00.0: supports D1 D2 [ 0.340301] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.340315] pci 0000:06:00.0: PME# disabled [ 0.340460] pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] [ 0.340465] pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.340473] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff] [ 0.340516] pci 0000:07:01.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff] [ 0.340573] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold [ 0.340578] pci 0000:07:01.0: PME# disabled [ 0.340618] pci 0000:07:01.1: reg 10 32bit mmio: [0xfebff400-0xfebff4ff] [ 0.340675] pci 0000:07:01.1: supports D1 D2 [ 0.340676] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.340681] pci 0000:07:01.1: PME# disabled [ 0.340721] pci 0000:07:01.2: reg 10 32bit mmio: [0xfebff000-0xfebff0ff] [ 0.340778] pci 0000:07:01.2: supports D1 D2 [ 0.340780] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.340785] pci 0000:07:01.2: PME# disabled [ 0.340824] pci 0000:07:01.3: reg 10 32bit mmio: [0xfebfec00-0xfebfecff] [ 0.340882] pci 0000:07:01.3: supports D1 D2 [ 0.340883] pci 0000:07:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.340888] pci 0000:07:01.3: PME# disabled [ 0.340928] pci 0000:07:01.4: reg 10 32bit mmio: [0xfebfe800-0xfebfe8ff] [ 0.340985] pci 0000:07:01.4: supports D1 D2 [ 0.340986] pci 0000:07:01.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.340991] pci 0000:07:01.4: PME# disabled [ 0.341051] pci 0000:00:1e.0: transparent bridge [ 0.341058] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.341102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.341266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.341332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 0.341390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.341503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.341560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.360903] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12) [ 0.361031] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12) [ 0.361158] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [ 0.361282] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12) [ 0.361408] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled. [ 0.361534] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12) [ 0.361660] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12) [ 0.361786] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12) [ 0.361936] SCSI subsystem initialized [ 0.361951] libata version 3.00 loaded. [ 0.361951] usbcore: registered new interface driver usbfs [ 0.361951] usbcore: registered new interface driver hub [ 0.361951] usbcore: registered new device driver usb [ 0.361951] ACPI: WMI: Mapper loaded [ 0.361951] PCI: Using ACPI for IRQ routing [ 0.400006] Bluetooth: Core ver 2.15 [ 0.400018] NET: Registered protocol family 31 [ 0.400018] Bluetooth: HCI device and connection manager initialized [ 0.400018] Bluetooth: HCI socket layer initialized [ 0.400018] NetLabel: Initializing [ 0.400018] NetLabel: domain hash size = 128 [ 0.400018] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.400027] NetLabel: unlabeled traffic allowed by default [ 0.400066] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.400070] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.440007] pnp: PnP ACPI init [ 0.440014] ACPI: bus type pnp registered [ 0.442484] pnp: PnP ACPI: found 14 devices [ 0.442486] ACPI: ACPI bus type pnp unregistered [ 0.442494] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved [ 0.442501] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.442503] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.442506] system 00:08: ioport range 0x400-0x41f has been reserved [ 0.442508] system 00:08: ioport range 0x500-0x57f has been reserved [ 0.442510] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.442513] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.442515] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved [ 0.442517] system 00:08: iomem range 0xfed90000-0xfed90fff has been reserved [ 0.442520] system 00:08: iomem range 0xfed91000-0xfed91fff has been reserved [ 0.442522] system 00:08: iomem range 0xfed92000-0xfed92fff has been reserved [ 0.442524] system 00:08: iomem range 0xfed93000-0xfed93fff has been reserved [ 0.442526] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.442529] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved [ 0.442536] system 00:0a: ioport range 0x250-0x253 has been reserved [ 0.442538] system 00:0a: ioport range 0x256-0x25f has been reserved [ 0.442541] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.442543] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.442545] system 00:0a: iomem range 0xfec10000-0xfec17fff has been reserved [ 0.442547] system 00:0a: iomem range 0xfec18000-0xfec1ffff has been reserved [ 0.442550] system 00:0a: iomem range 0xfec20000-0xfec27fff has been reserved [ 0.442552] system 00:0a: iomem range 0xfec38000-0xfec3ffff has been reserved [ 0.442556] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.442561] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.442563] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.442565] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.442568] system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved [ 0.447245] AppArmor: AppArmor Filesystem Enabled [ 0.447313] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.447316] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.447319] pci 0000:00:01.0: MEM window: 0xfa000000-0xfdefffff [ 0.447322] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.447326] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.447328] pci 0000:00:1c.0: IO window: disabled [ 0.447333] pci 0000:00:1c.0: MEM window: disabled [ 0.447337] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.447342] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.447344] pci 0000:00:1c.1: IO window: disabled [ 0.447349] pci 0000:00:1c.1: MEM window: 0xfdf00000-0xfdffffff [ 0.447354] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.447358] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.447361] pci 0000:00:1c.2: IO window: 0xd000-0xdfff [ 0.447367] pci 0000:00:1c.2: MEM window: 0xfe000000-0xfe9fffff [ 0.447372] pci 0000:00:1c.2: PREFETCH window: 0x000000f6000000-0x000000f8efffff [ 0.447380] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06 [ 0.447383] pci 0000:00:1c.5: IO window: 0xe000-0xefff [ 0.447388] pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff [ 0.447393] pci 0000:00:1c.5: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff [ 0.447401] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 0.447402] pci 0000:00:1e.0: IO window: disabled [ 0.447408] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff [ 0.447413] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.447422] alloc irq_desc for 16 on node 0 [ 0.447423] alloc kstat_irqs on node 0 [ 0.447427] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.447430] pci 0000:00:01.0: setting latency timer to 64 [ 0.447438] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.447442] pci 0000:00:1c.0: setting latency timer to 64 [ 0.447450] alloc irq_desc for 17 on node 0 [ 0.447451] alloc kstat_irqs on node 0 [ 0.447454] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.447459] pci 0000:00:1c.1: setting latency timer to 64 [ 0.447466] alloc irq_desc for 18 on node 0 [ 0.447468] alloc kstat_irqs on node 0 [ 0.447470] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.447475] pci 0000:00:1c.2: setting latency timer to 64 [ 0.447483] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.447488] pci 0000:00:1c.5: setting latency timer to 64 [ 0.447495] pci 0000:00:1e.0: setting latency timer to 64 [ 0.447499] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.447501] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.447503] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.447505] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfdefffff] [ 0.447507] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.447509] pci_bus 0000:03: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.447511] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.447513] pci_bus 0000:04: resource 1 mem: [0xfe000000-0xfe9fffff] [ 0.447515] pci_bus 0000:04: resource 2 pref mem [0xf6000000-0xf8efffff] [ 0.447517] pci_bus 0000:06: resource 0 io: [0xe000-0xefff] [ 0.447519] pci_bus 0000:06: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.447521] pci_bus 0000:06: resource 2 pref mem [0xf8f00000-0xf8ffffff] [ 0.447523] pci_bus 0000:07: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.447525] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.447527] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.447550] NET: Registered protocol family 2 [ 0.447684] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.448610] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.451840] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.452317] TCP: Hash tables configured (established 524288 bind 65536) [ 0.452319] TCP reno registered [ 0.452430] NET: Registered protocol family 1 [ 0.452491] Trying to unpack rootfs image as initramfs... [ 0.501769] Switched to high resolution mode on CPU 1 [ 0.510010] Switched to high resolution mode on CPU 0 [ 0.611667] Freeing initrd memory: 8021k freed [ 0.614461] Simple Boot Flag at 0x51 set to 0x1 [ 0.614625] Scanning for low memory corruption every 60 seconds [ 0.614758] audit: initializing netlink socket (disabled) [ 0.614774] type=2000 audit(1262599127.610:1): initialized [ 0.623194] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.624379] VFS: Disk quotas dquot_6.5.2 [ 0.624426] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.624935] fuse init (API version 7.12) [ 0.625002] msgmni has been set to 7928 [ 0.625184] alg: No test for stdrng (krng) [ 0.625195] io scheduler noop registered [ 0.625197] io scheduler anticipatory registered [ 0.625199] io scheduler deadline registered [ 0.625234] io scheduler cfq registered (default) [ 0.625423] pci 0000:01:00.0: Boot video device [ 0.625552] alloc irq_desc for 24 on node 0 [ 0.625554] alloc kstat_irqs on node 0 [ 0.625563] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.625568] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.625701] alloc irq_desc for 25 on node 0 [ 0.625703] alloc kstat_irqs on node 0 [ 0.625711] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.625722] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.625877] alloc irq_desc for 26 on node 0 [ 0.625879] alloc kstat_irqs on node 0 [ 0.625887] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.625897] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.626055] alloc irq_desc for 27 on node 0 [ 0.626057] alloc kstat_irqs on node 0 [ 0.626065] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X [ 0.626075] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.626238] alloc irq_desc for 28 on node 0 [ 0.626240] alloc kstat_irqs on node 0 [ 0.626248] pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X [ 0.626259] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.626352] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.626677] pciehp 0000:00:01.0:pcie04: HPC vendor_id 8086 device_id 2a41 ss_vid 0 ss_did 0 [ 0.626707] pciehp 0000:00:01.0:pcie04: service driver pciehp loaded [ 0.626729] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 0 ss_did 0 [ 0.626763] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded [ 0.626770] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.626924] ACPI: AC Adapter [AC0] (on-line) [ 0.626979] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.626982] ACPI: Power Button [PWRF] [ 0.627037] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.627043] ACPI: Sleep Button [SLPB] [ 0.627076] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.628375] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.643147] ACPI: Lid Switch [LID] [ 0.643907] ACPI: SSDT 00000000bffb73c0 00248 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.644518] ACPI: SSDT 00000000bffb76a0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.645270] Monitor-Mwait will be used to enter C-1 state [ 0.645290] Monitor-Mwait will be used to enter C-3 state [ 0.645302] Marking TSC unstable due to TSC halts in idle [ 0.645313] ACPI: CPU0 (power states: C1[C1] C2[C3]) [ 0.645332] processor LNXCPU:00: registered as cooling_device0 [ 0.645335] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.645653] ACPI: SSDT 00000000bffb72f0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.646010] ACPI: SSDT 00000000bffb7610 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.646759] ACPI: CPU1 (power states: C1[C1] C2[C3]) [ 0.646773] processor LNXCPU:01: registered as cooling_device1 [ 0.646776] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.656327] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.656335] ACPI: Thermal Zone [THRM] (32 C) [ 0.657288] Linux agpgart interface v0.103 [ 0.657295] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.658342] brd: module loaded [ 0.658708] loop: module loaded [ 0.658761] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.658855] ahci 0000:00:1f.2: version 3.0 [ 0.658867] alloc irq_desc for 19 on node 0 [ 0.658868] alloc kstat_irqs on node 0 [ 0.658872] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.658903] alloc irq_desc for 29 on node 0 [ 0.658904] alloc kstat_irqs on node 0 [ 0.658912] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 0.658962] ahci: SSS flag set, parallel bus scan disabled [ 0.659006] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.659009] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ems [ 0.659014] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.710048] scsi0 : ahci [ 0.710109] scsi1 : ahci [ 0.710151] scsi2 : ahci [ 0.710190] scsi3 : ahci [ 0.710233] scsi4 : ahci [ 0.710275] scsi5 : ahci [ 0.710502] ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 29 [ 0.710506] ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 29 [ 0.710507] ata3: DUMMY [ 0.710508] ata4: DUMMY [ 0.710511] ata5: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff300 irq 29 [ 0.710514] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 29 [ 0.711282] Fixed MDIO Bus: probed [ 0.711309] PPP generic driver version 2.4.2 [ 0.711374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.711448] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.711461] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.711466] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.711511] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.715407] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.715413] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.715426] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 0.718174] ACPI: Battery Slot [BAT0] (battery present) [ 0.730014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.730069] usb usb1: configuration #1 chosen from 1 choice [ 0.730092] hub 1-0:1.0: USB hub found [ 0.730098] hub 1-0:1.0: 6 ports detected [ 0.730179] alloc irq_desc for 23 on node 0 [ 0.730181] alloc kstat_irqs on node 0 [ 0.730184] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.730193] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.730197] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.730230] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.734145] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.734151] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.734162] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 0.750014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.750069] usb usb2: configuration #1 chosen from 1 choice [ 0.750089] hub 2-0:1.0: USB hub found [ 0.750096] hub 2-0:1.0: 6 ports detected [ 0.750152] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.750164] uhci_hcd: USB Universal Host Controller Interface driver [ 0.750228] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.750234] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.750238] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.750261] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.750292] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 [ 0.750356] usb usb3: configuration #1 chosen from 1 choice [ 0.750376] hub 3-0:1.0: USB hub found [ 0.750382] hub 3-0:1.0: 2 ports detected [ 0.750447] alloc irq_desc for 21 on node 0 [ 0.750448] alloc kstat_irqs on node 0 [ 0.750452] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.750458] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.750461] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.750487] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.750518] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 0.750579] usb usb4: configuration #1 chosen from 1 choice [ 0.750601] hub 4-0:1.0: USB hub found [ 0.750607] hub 4-0:1.0: 2 ports detected [ 0.750670] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.750676] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.750680] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.750705] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.750737] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800 [ 0.750802] usb usb5: configuration #1 chosen from 1 choice [ 0.750824] hub 5-0:1.0: USB hub found [ 0.750829] hub 5-0:1.0: 2 ports detected [ 0.750892] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.750898] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.750901] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.750931] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.750955] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 [ 0.751019] usb usb6: configuration #1 chosen from 1 choice [ 0.751039] hub 6-0:1.0: USB hub found [ 0.751044] hub 6-0:1.0: 2 ports detected [ 0.751109] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.751115] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.751118] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.751143] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.751167] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 0.751230] usb usb7: configuration #1 chosen from 1 choice [ 0.751250] hub 7-0:1.0: USB hub found [ 0.751255] hub 7-0:1.0: 2 ports detected [ 0.751321] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.751327] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.751330] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.751354] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.751377] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080 [ 0.751442] usb usb8: configuration #1 chosen from 1 choice [ 0.751462] hub 8-0:1.0: USB hub found [ 0.751471] hub 8-0:1.0: 2 ports detected [ 0.751557] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.755350] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.757372] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.757376] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.757378] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.757381] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.757383] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.757429] mice: PS/2 mouse device common for all mice [ 0.757518] rtc_cmos 00:03: RTC can wake from S4 [ 0.757543] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.757571] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.757645] device-mapper: uevent: version 1.0.3 [ 0.757719] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.757787] device-mapper: multipath: version 1.1.0 loaded [ 0.757790] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.757981] cpuidle: using governor ladder [ 0.758049] cpuidle: using governor menu [ 0.758364] TCP cubic registered [ 0.758465] NET: Registered protocol family 10 [ 0.758825] lo: Disabled Privacy Extensions [ 0.759054] NET: Registered protocol family 17 [ 0.759068] Bluetooth: L2CAP ver 2.13 [ 0.759070] Bluetooth: L2CAP socket layer initialized [ 0.759073] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.759075] Bluetooth: SCO socket layer initialized [ 0.759105] Bluetooth: RFCOMM TTY layer initialized [ 0.759108] Bluetooth: RFCOMM socket layer initialized [ 0.759109] Bluetooth: RFCOMM ver 1.11 [ 0.759758] PM: Resume from disk failed. [ 0.759766] registered taskstats version 1 [ 0.759872] Magic number: 10:662:979 [ 0.759959] rtc_cmos 00:03: setting system clock to 2010-01-04 09:58:49 UTC (1262599129) [ 0.759961] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.759963] EDD information not available. [ 0.795545] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.001285] Clocksource tsc unstable (delta = -225268540 ns) [ 1.050065] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 1.060083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.061109] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 1.070249] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded [ 1.080234] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded [ 1.160718] ata1.00: ATA-8: ST9320421AS, SD14, max UDMA/133 [ 1.160721] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.176566] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 1.186960] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded [ 1.197048] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded [ 1.200521] usb 1-4: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 9 [ 1.200524] usb 1-4: config 1 interface 0 altsetting 0 endpoint 0x2 has an invalid bInterval 0, changing to 9 [ 1.201035] usb 1-4: configuration #1 chosen from 1 choice [ 1.227945] ata1.00: configured for UDMA/133 [ 1.228031] scsi 0:0:0:0: Direct-Access ATA ST9320421AS SD14 PQ: 0 ANSI: 5 [ 1.228118] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.228154] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.228188] sd 0:0:0:0: [sda] Write Protect is off [ 1.228190] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.228210] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.228308] sda: sda1 sda2 sda3 < sda5 > [ 1.263109] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.440075] usb 2-5: new high speed USB device using ehci_hcd and address 2 [ 1.637893] usb 2-5: configuration #1 chosen from 1 choice [ 1.760072] hub 2-0:1.0: unable to enumerate USB device on port 6 [ 1.970111] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.981444] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded [ 1.982020] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded [ 1.985845] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR07, max UDMA/133 [ 1.992009] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded [ 1.992514] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded [ 1.996406] ata2.00: configured for UDMA/133 [ 2.040124] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 2.113759] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RR07 PQ: 0 ANSI: 5 [ 2.443743] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.443747] Uniform CD-ROM driver Revision: 3.20 [ 2.443831] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.443879] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.778847] usb 5-1: configuration #1 chosen from 1 choice [ 3.190113] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.265123] ata5.00: ATA-8: ST9320421AS, SD14, max UDMA/133 [ 3.265126] ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.307875] ata5.00: configured for UDMA/133 [ 3.307949] scsi 4:0:0:0: Direct-Access ATA ST9320421AS SD14 PQ: 0 ANSI: 5 [ 3.308064] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.308095] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.308128] sd 4:0:0:0: [sdb] Write Protect is off [ 3.308130] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.308148] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.308228] sdb: sdb1 sdb2 < sdb5 > [ 3.344626] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.650111] ata6: SATA link down (SStatus 0 SControl 300) [ 3.650178] Freeing unused kernel memory: 660k freed [ 3.650388] Write protecting the kernel read-only data: 7584k [ 3.794474] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.794506] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.794617] r8169 0000:06:00.0: setting latency timer to 64 [ 3.794780] alloc irq_desc for 30 on node 0 [ 3.794782] alloc kstat_irqs on node 0 [ 3.794820] r8169 0000:06:00.0: irq 30 for MSI/MSI-X [ 3.795415] eth0: RTL8168c/8111c at 0xffffc90011134000, 00:26:18:56:a7:96, XID 3c4000c0 IRQ 30 [ 3.808471] ohci1394 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.811102] usbcore: registered new interface driver hiddev [ 3.811134] usbcore: registered new interface driver usbhid [ 3.811136] usbhid: v2.6:USB HID core driver [ 3.814318] acpi device:1e: registered as cooling_device2 [ 3.814429] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/device:1a/input/input5 [ 3.814461] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.830154] usb 8-2: new full speed USB device using uhci_hcd and address 2 [ 3.862147] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 4.017515] usb 8-2: configuration #1 chosen from 1 choice [ 4.024485] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input6 [ 4.024536] generic-usb 0003:1532:0101.0001: input,hidraw0: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1d.2-2/input0 [ 4.026620] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input7 [ 4.026655] generic-usb 0003:1532:0101.0002: input,hidraw1: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1d.2-2/input1 [ 5.260093] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001e76a2e] [ 5.554165] PM: Starting manual resume from disk [ 5.554169] PM: Resume from partition 8:21 [ 5.554170] PM: Checking hibernation image. [ 5.554350] PM: Resume from disk failed. [ 5.606217] EXT4-fs (sdb1): barriers enabled [ 5.640047] kjournald2 starting: pid 472, dev sdb1:8, commit interval 5 seconds [ 5.640055] EXT4-fs (sdb1): delayed allocation enabled [ 5.640057] EXT4-fs: file extents enabled [ 5.653318] EXT4-fs: mballoc enabled [ 5.653328] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 6.173377] type=1505 audit(1262599134.911:2): operation="profile_load" pid=499 name=/usr/share/gdm/guest-session/Xsession [ 6.175374] type=1505 audit(1262599134.911:3): operation="profile_load" pid=500 name=/sbin/dhclient3 [ 6.175920] type=1505 audit(1262599134.911:4): operation="profile_load" pid=500 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 6.176214] type=1505 audit(1262599134.911:5): operation="profile_load" pid=500 name=/usr/lib/connman/scripts/dhclient-script [ 6.214992] type=1505 audit(1262599134.951:6): operation="profile_load" pid=501 name=/usr/bin/evince [ 6.223571] type=1505 audit(1262599134.961:7): operation="profile_load" pid=501 name=/usr/bin/evince-previewer [ 6.228600] type=1505 audit(1262599134.961:8): operation="profile_load" pid=501 name=/usr/bin/evince-thumbnailer [ 6.241090] type=1505 audit(1262599134.971:9): operation="profile_load" pid=503 name=/usr/lib/cups/backend/cups-pdf [ 6.241790] type=1505 audit(1262599134.981:10): operation="profile_load" pid=503 name=/usr/sbin/cupsd [ 6.244077] type=1505 audit(1262599134.981:11): operation="profile_load" pid=504 name=/usr/sbin/tcpdump [ 14.353679] udev: starting version 147 [ 14.369702] asus_laptop: Asus Laptop Support version 0.42 [ 14.371627] Adding 11888060k swap on /dev/sdb5. Priority:-1 extents:1 across:11888060k [ 14.377616] asus_laptop: G50VT model detected [ 14.378262] input: Asus Laptop extra buttons as /devices/virtual/input/input8 [ 14.378354] Registered led device: asus::touchpad [ 14.380887] asus_laptop: Brightness ignored, must be controlled by ACPI video driver [ 14.383526] lp: driver loaded but no devices found [ 14.430525] sdhci: Secure Digital Host Controller Interface driver [ 14.430528] sdhci: Copyright(c) Pierre Ossman [ 14.432016] sdhci-pci 0000:07:01.1: SDHCI controller found [1180:0822] (rev 22) [ 14.432033] sdhci-pci 0000:07:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 14.433087] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 14.434136] Registered led device: mmc0:: [ 14.435166] mmc0: SDHCI controller on PCI [0000:07:01.1] using DMA [ 14.521671] nvidia: module license 'NVIDIA' taints kernel. [ 14.521674] Disabling lock debugging due to kernel taint [ 14.535346] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 14.535446] usbcore: registered new interface driver btusb [ 14.538735] asus_oled: module is from the staging directory, the quality is unknown, you have been warned. [ 14.539551] asus-oled 1-4:1.0: Attached Asus OLED device: G50 [width 256, pack_mode 1] [ 14.539564] usbcore: registered new interface driver asus-oled [ 14.602205] ricoh-mmc: Ricoh MMC Controller disabling driver [ 14.602207] ricoh-mmc: Copyright(c) Philip Langdale [ 14.678890] EXT4-fs (sdb1): internal journal on sdb1:8 [ 14.785363] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.790380] ricoh-mmc: Ricoh MMC controller found at 0000:07:01.2 [1180:0843] (rev 12) [ 14.790400] ricoh-mmc: Controller is now disabled. [ 14.792817] Linux video capture interface: v2.00 [ 14.794886] uvcvideo: Found UVC 1.00 device USB 2.0 UVC 2.0M WebCam (064e:a115) [ 14.807622] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.807643] nvidia 0000:01:00.0: setting latency timer to 64 [ 14.807782] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.20 Thu Jun 25 18:15:32 PDT 2009 [ 14.810945] cfg80211: Calling CRDA to update world regulatory domain [ 14.813312] input: USB 2.0 UVC 2.0M WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input9 [ 14.813357] usbcore: registered new interface driver uvcvideo [ 14.813359] USB Video Class driver (v0.1.0) [ 14.827181] cfg80211: World regulatory domain updated: [ 14.827183] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.827186] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.827188] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.827190] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.827192] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.827194] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.848195] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 14.848197] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 14.853213] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 14.853241] iwlagn 0000:03:00.0: setting latency timer to 64 [ 14.853308] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 14.899399] alloc irq_desc for 22 on node 0 [ 14.899401] alloc kstat_irqs on node 0 [ 14.899406] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 14.899462] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.900525] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 14.900595] alloc irq_desc for 31 on node 0 [ 14.900597] alloc kstat_irqs on node 0 [ 14.900615] iwlagn 0000:03:00.0: irq 31 for MSI/MSI-X [ 14.958376] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 15.053139] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode [ 15.104370] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 15.209031] type=1505 audit(1262595543.940:12): operation="profile_replace" pid=1127 name=/usr/share/gdm/guest-session/Xsession [ 15.210290] type=1505 audit(1262595543.950:13): operation="profile_replace" pid=1128 name=/sbin/dhclient3 [ 15.210822] type=1505 audit(1262595543.950:14): operation="profile_replace" pid=1128 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 15.211113] type=1505 audit(1262595543.950:15): operation="profile_replace" pid=1128 name=/usr/lib/connman/scripts/dhclient-script [ 15.213920] type=1505 audit(1262595543.950:16): operation="profile_replace" pid=1129 name=/usr/bin/evince [ 15.222739] type=1505 audit(1262595543.960:17): operation="profile_replace" pid=1129 name=/usr/bin/evince-previewer [ 15.227788] type=1505 audit(1262595543.960:18): operation="profile_replace" pid=1129 name=/usr/bin/evince-thumbnailer [ 15.236321] type=1505 audit(1262595543.970:19): operation="profile_replace" pid=1131 name=/usr/lib/cups/backend/cups-pdf [ 15.236952] type=1505 audit(1262595543.970:20): operation="profile_replace" pid=1131 name=/usr/sbin/cupsd [ 15.238657] type=1505 audit(1262595543.970:21): operation="profile_replace" pid=1132 name=/usr/sbin/tcpdump [ 15.439739] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 [ 15.499964] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000 [ 15.562658] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 15.589344] Registered led device: iwl-phy0::radio [ 15.589367] Registered led device: iwl-phy0::assoc [ 15.589386] Registered led device: iwl-phy0::RX [ 15.589409] Registered led device: iwl-phy0::TX [ 15.612254] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.652020] r8169: eth0: link up [ 15.652050] r8169: eth0: link up [ 17.369424] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.369426] Bluetooth: BNEP filters: protocol multicast [ 17.373779] Bridge firewalling registered [ 17.555001] ppdev: user-space parallel port driver [ 18.373468] CPU0 attaching NULL sched-domain. [ 18.373473] CPU1 attaching NULL sched-domain. [ 18.410096] CPU0 attaching sched-domain: [ 18.410100] domain 0: span 0-1 level MC [ 18.410102] groups: 0 1 [ 18.410106] CPU1 attaching sched-domain: [ 18.410108] domain 0: span 0-1 level MC [ 18.410110] groups: 1 0 [ 19.066616] usplash:426 freeing invalid memtype fffffffffb000000-fffffffffbe00000 [ 24.091354] CE: hpet increasing min_delta_ns to 15000 nsec [ 24.091455] CE: hpet increasing min_delta_ns to 22500 nsec [ 26.311270] eth0: no IPv6 routers present [ 29.922235] CPU0 attaching NULL sched-domain. [ 29.922241] CPU1 attaching NULL sched-domain. [ 29.951492] CPU0 attaching sched-domain: [ 29.951497] domain 0: span 0-1 level MC [ 29.951500] groups: 0 1 [ 29.951507] CPU1 attaching sched-domain: [ 29.951509] domain 0: span 0-1 level MC [ 29.951512] groups: 1 0 [ 36.900120] CE: hpet increasing min_delta_ns to 33750 nsec [ 45.511414] CE: hpet increasing min_delta_ns to 50624 nsec [ 54.643410] Intel AES-NI instructions are not detected. [ 54.695779] padlock: VIA PadLock not detected. [ 58.481985] pciehp 0000:00:01.0:pcie04: Card present on Slot(16)