[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] Command line: root=UUID=cb832714-a26f-4f20-a85f-de2b92164bcb ro splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] modified: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fff0000 @ 8000-c000 [ 0.000000] RAMDISK: 37832000 - 37fef9cc [ 0.000000] ACPI: RSDP 00000000000f6640 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 000000007fff3000 00038 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: FACP 000000007fff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: DSDT 000000007fff30c0 04C8E (v01 GBT NVDAACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 000000007fff0000 00040 [ 0.000000] ACPI: SSDT 000000007fff7e40 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 000000007fff8140 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098) [ 0.000000] ACPI: MCFG 000000007fff8180 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: APIC 000000007fff7d80 00098 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff] [ 0.000000] bootmap [000000000000f000 - 000000000001efff] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e2ccc] TEXT DATA BSS ==> [0001000000 - 00019e2ccc] [ 0.000000] #3 [0037832000 - 0037fef9cc] RAMDISK ==> [0037832000 - 0037fef9cc] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00019e3000 - 00019e30ce] BRK ==> [00019e3000 - 00019e30ce] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000f4cd0] f4cd0 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524170 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 101 pages reserved [ 0.000000] DMA zone: 3837 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513064 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfefffc00 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:50000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff8800019f4000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516901 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=cb832714-a26f-4f20-a85f-de2b92164bcb ro splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ ff52000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2049304k/2097088k available (5313k kernel code, 408k absent, 47376k reserved, 3011k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2713.757 MHz processor. [ 0.000011] spurious 8259A interrupt: IRQ7. [ 0.001621] Console: colour VGA+ 80x25 [ 0.001623] console [tty0] enabled [ 0.010000] allocated 20971520 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5427.51 BogoMIPS (lpj=27137570) [ 0.010126] Security Framework initialized [ 0.010190] AppArmor: AppArmor initialized [ 0.010373] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011392] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.011902] Mount-cache hash table entries: 256 [ 0.012073] Initializing cgroup subsys ns [ 0.012124] Initializing cgroup subsys cpuacct [ 0.012174] Initializing cgroup subsys memory [ 0.012227] Initializing cgroup subsys freezer [ 0.012276] Initializing cgroup subsys net_cls [ 0.012333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012384] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012434] CPU 0/0x0 -> Node 0 [ 0.012481] tseg: 0000000000 [ 0.012496] CPU: Physical Processor ID: 0 [ 0.012544] CPU: Processor Core ID: 0 [ 0.012592] mce: CPU supports 5 MCE banks [ 0.012647] using C1E aware idle routine [ 0.012696] Performance Counters: AMD PMU driver. [ 0.012783] ... version: 0 [ 0.012831] ... bit width: 48 [ 0.012879] ... generic counters: 4 [ 0.012927] ... value mask: 0000ffffffffffff [ 0.012976] ... max period: 00007fffffffffff [ 0.013025] ... fixed-purpose counters: 0 [ 0.013073] ... counter mask: 000000000000000f [ 0.014331] ACPI: Core revision 20090521 [ 0.020061] Setting APIC routing to flat [ 0.020492] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.121877] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 5427.96 BogoMIPS (lpj=27139814) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 5 MCE banks [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.280396] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.280962] Brought up 2 CPUs [ 0.281009] Total of 2 processors activated (10855.47 BogoMIPS). [ 0.281128] CPU0 attaching sched-domain: [ 0.281130] domain 0: span 0-1 level MC [ 0.281132] groups: 0 1 [ 0.281136] CPU1 attaching sched-domain: [ 0.281138] domain 0: span 0-1 level MC [ 0.281140] groups: 1 0 [ 0.281195] Booting paravirtualized kernel on bare hardware [ 0.281195] regulator: core version 0.5 [ 0.281195] Time: 16:09:20 Date: 10/28/09 [ 0.281195] NET: Registered protocol family 16 [ 0.281195] node 0 link 0: io port [1000, fffff] [ 0.281195] TOM: 0000000080000000 aka 2048M [ 0.281195] node 0 link 0: mmio [f0000000, f7ffffff] [ 0.281195] node 0 link 0: mmio [a0000, bffff] [ 0.281195] node 0 link 0: mmio [80000000, ffb7ffff] [ 0.281195] bus: [00,ff] on node 0 link 0 [ 0.281195] bus: 00 index 0 io port: [0, ffff] [ 0.281195] bus: 00 index 1 mmio: [80000000, fcffffffff] [ 0.281195] bus: 00 index 2 mmio: [a0000, bffff] [ 0.281195] ACPI: bus type pci registered [ 0.281195] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.281195] PCI: MCFG area at f0000000 reserved in E820 [ 0.282964] PCI: Using MMCONFIG at f0000000 - f7ffffff [ 0.283013] PCI: Using configuration type 1 for base access [ 0.283673] bio: create slab at 0 [ 0.283673] ACPI: EC: Look up EC in DSDT [ 0.291981] ACPI: Interpreter enabled [ 0.292031] ACPI: (supports S0 S3 S4 S5) [ 0.292239] ACPI: Using IOAPIC for interrupt routing [ 0.298528] ACPI: No dock devices found. [ 0.298655] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.298884] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.298957] pci 0000:00:01.1: reg 10 io port: [0xe800-0xe83f] [ 0.298967] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.298971] pci 0000:00:01.1: reg 24 io port: [0x1c80-0x1cbf] [ 0.298989] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.299042] pci 0000:00:01.1: PME# disabled [ 0.299110] pci 0000:00:02.0: reg 10 32bit mmio: [0xfc105000-0xfc105fff] [ 0.299126] pci 0000:00:02.0: supports D1 D2 [ 0.299128] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.299179] pci 0000:00:02.0: PME# disabled [ 0.300027] pci 0000:00:02.1: reg 10 32bit mmio: [0xfc106000-0xfc1060ff] [ 0.300045] pci 0000:00:02.1: supports D1 D2 [ 0.300046] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.300097] pci 0000:00:02.1: PME# disabled [ 0.300166] pci 0000:00:04.0: reg 20 io port: [0xf000-0xf00f] [ 0.300192] pci 0000:00:05.0: reg 10 io port: [0xa800-0xa807] [ 0.300195] pci 0000:00:05.0: reg 14 io port: [0xac00-0xac03] [ 0.300198] pci 0000:00:05.0: reg 18 io port: [0xb000-0xb007] [ 0.300201] pci 0000:00:05.0: reg 1c io port: [0xb400-0xb403] [ 0.300204] pci 0000:00:05.0: reg 20 io port: [0xb800-0xb80f] [ 0.300207] pci 0000:00:05.0: reg 24 32bit mmio: [0xfc10a000-0xfc10afff] [ 0.300232] pci 0000:00:05.1: reg 10 io port: [0xbc00-0xbc07] [ 0.300235] pci 0000:00:05.1: reg 14 io port: [0xc000-0xc003] [ 0.300238] pci 0000:00:05.1: reg 18 io port: [0xc400-0xc407] [ 0.300241] pci 0000:00:05.1: reg 1c io port: [0xc800-0xc803] [ 0.300244] pci 0000:00:05.1: reg 20 io port: [0xcc00-0xcc0f] [ 0.300247] pci 0000:00:05.1: reg 24 32bit mmio: [0xfc10b000-0xfc10bfff] [ 0.300273] pci 0000:00:05.2: reg 10 io port: [0xd000-0xd007] [ 0.300276] pci 0000:00:05.2: reg 14 io port: [0xd400-0xd403] [ 0.300279] pci 0000:00:05.2: reg 18 io port: [0xd800-0xd807] [ 0.300282] pci 0000:00:05.2: reg 1c io port: [0xdc00-0xdc03] [ 0.300285] pci 0000:00:05.2: reg 20 io port: [0xe000-0xe00f] [ 0.300288] pci 0000:00:05.2: reg 24 32bit mmio: [0xfc104000-0xfc104fff] [ 0.300336] pci 0000:00:06.1: reg 10 32bit mmio: [0xfc100000-0xfc103fff] [ 0.300356] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.300407] pci 0000:00:06.1: PME# disabled [ 0.300482] pci 0000:00:08.0: reg 10 32bit mmio: [0xfc107000-0xfc107fff] [ 0.300485] pci 0000:00:08.0: reg 14 io port: [0xe400-0xe407] [ 0.300488] pci 0000:00:08.0: reg 18 32bit mmio: [0xfc108000-0xfc1080ff] [ 0.300492] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfc109000-0xfc10900f] [ 0.300509] pci 0000:00:08.0: supports D1 D2 [ 0.300511] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.300564] pci 0000:00:08.0: PME# disabled [ 0.300641] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.300692] pci 0000:00:0f.0: PME# disabled [ 0.300824] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfc004000-0xfc0047ff] [ 0.300828] pci 0000:01:0a.0: reg 14 32bit mmio: [0xfc000000-0xfc003fff] [ 0.300852] pci 0000:01:0a.0: supports D1 D2 [ 0.300853] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.300904] pci 0000:01:0a.0: PME# disabled [ 0.300970] pci 0000:00:06.0: transparent bridge [ 0.301020] pci 0000:00:06.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff] [ 0.301042] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.301048] pci 0000:02:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.301055] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.301059] pci 0000:02:00.0: reg 24 io port: [0x9000-0x907f] [ 0.301063] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.301108] pci 0000:00:0f.0: bridge io port: [0x9000-0x9fff] [ 0.301111] pci 0000:00:0f.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.301114] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.301121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.301321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.338607] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.339169] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.339730] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 0.340220] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.340780] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341342] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 *15) [ 0.341821] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342382] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342942] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.343503] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 *15) [ 0.343983] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.344463] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.344943] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.345504] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) [ 0.345985] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 0.346465] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.347025] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 *15) [ 0.347505] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.347985] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) [ 0.348503] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.348869] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.349234] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.349563] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.349928] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.350295] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.350623] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.350988] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.351354] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.351792] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.352231] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.352707] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.353146] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.353585] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.354024] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.354500] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.354976] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.355418] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.355857] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.356315] SCSI subsystem initialized [ 0.356402] libata version 3.00 loaded. [ 0.356402] usbcore: registered new interface driver usbfs [ 0.356402] usbcore: registered new interface driver hub [ 0.356402] usbcore: registered new device driver usb [ 0.356402] ACPI: WMI: Mapper loaded [ 0.356402] PCI: Using ACPI for IRQ routing [ 0.380005] Bluetooth: Core ver 2.15 [ 0.380066] NET: Registered protocol family 31 [ 0.380066] Bluetooth: HCI device and connection manager initialized [ 0.380110] Bluetooth: HCI socket layer initialized [ 0.380158] NetLabel: Initializing [ 0.380205] NetLabel: domain hash size = 128 [ 0.380253] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.380313] NetLabel: unlabeled traffic allowed by default [ 0.410012] pnp: PnP ACPI init [ 0.410078] ACPI: bus type pnp registered [ 0.413409] pnp: PnP ACPI: found 14 devices [ 0.413458] ACPI: ACPI bus type pnp unregistered [ 0.413514] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.413565] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.413616] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.413667] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.413718] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.413769] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.413820] system 00:01: iomem range 0xd0000000-0xdfffffff has been reserved [ 0.413874] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.413924] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.413975] system 00:02: ioport range 0x295-0x314 has been reserved [ 0.414026] system 00:02: ioport range 0x290-0x294 has been reserved [ 0.414079] system 00:0c: iomem range 0xf0000000-0xf7ffffff has been reserved [ 0.414133] system 00:0d: iomem range 0xd0000-0xd3fff has been reserved [ 0.414184] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 0.414235] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 0.414286] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 0.414338] system 00:0d: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.414397] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved [ 0.414448] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.414499] system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.414558] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.414617] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.419324] AppArmor: AppArmor Filesystem Enabled [ 0.419391] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.419441] pci 0000:00:06.0: IO window: disabled [ 0.419491] pci 0000:00:06.0: MEM window: 0xfc000000-0xfc0fffff [ 0.419542] pci 0000:00:06.0: PREFETCH window: disabled [ 0.419594] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:02 [ 0.419645] pci 0000:00:0f.0: IO window: 0x9000-0x9fff [ 0.419695] pci 0000:00:0f.0: MEM window: 0xf8000000-0xfbffffff [ 0.419746] pci 0000:00:0f.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.419809] pci 0000:00:06.0: setting latency timer to 64 [ 0.419813] pci 0000:00:0f.0: setting latency timer to 64 [ 0.419817] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.419819] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.419822] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc0fffff] [ 0.419824] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.419826] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.419829] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff] [ 0.419831] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.419833] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.419865] NET: Registered protocol family 2 [ 0.420021] Switched to high resolution mode on CPU 0 [ 0.420058] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.420349] Switched to high resolution mode on CPU 1 [ 0.420885] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.422528] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.422993] TCP: Hash tables configured (established 262144 bind 65536) [ 0.423045] TCP reno registered [ 0.423182] NET: Registered protocol family 1 [ 0.423287] Trying to unpack rootfs image as initramfs... [ 0.575225] Freeing initrd memory: 7926k freed [ 0.578609] Scanning for low memory corruption every 60 seconds [ 0.578777] audit: initializing netlink socket (disabled) [ 0.578838] type=2000 audit(1256746160.570:1): initialized [ 0.585951] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.587161] VFS: Disk quotas dquot_6.5.2 [ 0.587254] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.587823] fuse init (API version 7.12) [ 0.587937] msgmni has been set to 4018 [ 0.588218] alg: No test for stdrng (krng) [ 0.588287] io scheduler noop registered [ 0.588335] io scheduler anticipatory registered [ 0.588383] io scheduler deadline registered [ 0.588466] io scheduler cfq registered (default) [ 0.613432] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613523] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613614] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613705] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613798] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.613898] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.614000] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.614064] pci 0000:02:00.0: Boot video device [ 0.614172] alloc irq_desc for 24 on node 0 [ 0.614174] alloc kstat_irqs on node 0 [ 0.614181] pcieport-driver 0000:00:0f.0: irq 24 for MSI/MSI-X [ 0.614185] pcieport-driver 0000:00:0f.0: setting latency timer to 64 [ 0.614238] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.614308] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.614463] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.614522] ACPI: Power Button [PWRF] [ 0.614617] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.614677] ACPI: Power Button [PWRB] [ 0.615088] processor LNXCPU:00: registered as cooling_device0 [ 0.615167] processor LNXCPU:01: registered as cooling_device1 [ 0.618852] hpet_acpi_add: no address or irqs in _CRS [ 0.618910] Linux agpgart interface v0.103 [ 0.618966] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.619104] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.619372] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.620271] brd: module loaded [ 0.620660] loop: module loaded [ 0.620779] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.621040] sata_nv 0000:00:05.0: version 3.5 [ 0.621317] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.621369] alloc irq_desc for 23 on node 0 [ 0.621371] alloc kstat_irqs on node 0 [ 0.621377] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.621437] sata_nv 0000:00:05.0: Using SWNCQ mode [ 0.621526] sata_nv 0000:00:05.0: setting latency timer to 64 [ 0.621647] scsi0 : sata_nv [ 0.621793] scsi1 : sata_nv [ 0.621965] ata1: SATA max UDMA/133 cmd 0xa800 ctl 0xac00 bmdma 0xb800 irq 23 [ 0.622017] ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xb808 irq 23 [ 0.622348] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.622399] alloc irq_desc for 22 on node 0 [ 0.622400] alloc kstat_irqs on node 0 [ 0.622405] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.622464] sata_nv 0000:00:05.1: Using SWNCQ mode [ 0.622542] sata_nv 0000:00:05.1: setting latency timer to 64 [ 0.622649] scsi2 : sata_nv [ 0.622757] scsi3 : sata_nv [ 0.622925] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xcc00 irq 22 [ 0.622977] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc800 bmdma 0xcc08 irq 22 [ 0.633436] ata3: SATA link down (SStatus 0 SControl 300) [ 0.633908] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.633960] alloc irq_desc for 21 on node 0 [ 0.633962] alloc kstat_irqs on node 0 [ 0.633967] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.635033] sata_nv 0000:00:05.2: Using SWNCQ mode [ 0.635120] sata_nv 0000:00:05.2: setting latency timer to 64 [ 0.635235] scsi4 : sata_nv [ 0.635354] scsi5 : sata_nv [ 0.635523] ata5: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 21 [ 0.635574] ata6: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 21 [ 0.645975] ata5: SATA link down (SStatus 0 SControl 300) [ 0.646067] pata_amd 0000:00:04.0: version 0.4.1 [ 0.646095] pata_amd 0000:00:04.0: setting latency timer to 64 [ 0.646154] scsi6 : pata_amd [ 0.646251] scsi7 : pata_amd [ 0.646862] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.646913] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.647467] Fixed MDIO Bus: probed [ 0.647542] PPP generic driver version 2.4.2 [ 0.647677] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.648076] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.648128] alloc irq_desc for 20 on node 0 [ 0.648129] alloc kstat_irqs on node 0 [ 0.648135] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 0.648206] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.648208] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.648300] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.648380] ehci_hcd 0000:00:02.1: debug port 1 [ 0.648430] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.648445] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfc106000 [ 0.660022] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.660128] usb usb1: configuration #1 chosen from 1 choice [ 0.660202] hub 1-0:1.0: USB hub found [ 0.660255] hub 1-0:1.0: 10 ports detected [ 0.660362] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.660689] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.660740] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.660806] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.660808] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.660882] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.660950] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfc105000 [ 0.722063] usb usb2: configuration #1 chosen from 1 choice [ 0.722133] hub 2-0:1.0: USB hub found [ 0.722187] hub 2-0:1.0: 10 ports detected [ 0.722285] uhci_hcd: USB Universal Host Controller Interface driver [ 0.722432] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.722482] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.722604] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.722708] mice: PS/2 mouse device common for all mice [ 0.722831] rtc_cmos 00:05: RTC can wake from S4 [ 0.722906] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.722981] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.723104] device-mapper: uevent: version 1.0.3 [ 0.723229] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.723366] device-mapper: multipath: version 1.1.0 loaded [ 0.723417] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.723651] cpuidle: using governor ladder [ 0.723701] cpuidle: using governor menu [ 0.724081] TCP cubic registered [ 0.724234] NET: Registered protocol family 10 [ 0.724648] lo: Disabled Privacy Extensions [ 0.724913] NET: Registered protocol family 17 [ 0.724977] Bluetooth: L2CAP ver 2.13 [ 0.725024] Bluetooth: L2CAP socket layer initialized [ 0.725074] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.725122] Bluetooth: SCO socket layer initialized [ 0.725204] Bluetooth: RFCOMM TTY layer initialized [ 0.725254] Bluetooth: RFCOMM socket layer initialized [ 0.725303] Bluetooth: RFCOMM ver 1.11 [ 0.725373] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (2 cpu cores) (version 2.20.00) [ 0.725479] powernow-k8: 0 : fid 0x13 (2700 MHz), vid 0x9 [ 0.725529] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa [ 0.725578] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc [ 0.725628] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe [ 0.725677] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 [ 0.725727] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 [ 0.725777] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 [ 0.725910] PM: Resume from disk failed. [ 0.725921] registered taskstats version 1 [ 0.726089] Magic number: 13:442:187 [ 0.726227] rtc_cmos 00:05: setting system clock to 2009-10-28 16:09:21 UTC (1256746161) [ 0.726287] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.726337] EDD information not available. [ 0.749213] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.781284] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.841485] ata7.00: HPA unlocked: 156299375 -> 156301488, native 156301488 [ 0.841538] ata7.00: ATA-6: WDC WD800JB-00FMA0, 13.03G13, max UDMA/100 [ 0.841589] ata7.00: 156301488 sectors, multi 16: LBA [ 0.841656] ata7: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13) [ 0.880310] ata7.00: configured for UDMA/100 [ 0.980022] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.000121] ata1.00: HPA unlocked: 312579695 -> 312581808, native 312581808 [ 1.000175] ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133 [ 1.000225] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.070465] ata1.00: configured for UDMA/133 [ 1.070602] scsi 0:0:0:0: Direct-Access ATA ST3160811AS 3.AA PQ: 0 ANSI: 5 [ 1.070756] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.070836] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.070927] sd 0:0:0:0: [sda] Write Protect is off [ 1.070976] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.070995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.071156] sda: [ 1.133935] usb 1-3: configuration #1 chosen from 1 choice [ 1.135141] sda1 sda2 sda3 [ 1.135477] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.230042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.250340] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100 [ 1.290143] ata2.00: configured for UDMA/100 [ 1.292010] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L08 PQ: 0 ANSI: 5 [ 1.294439] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.294498] Uniform CD-ROM driver Revision: 3.20 [ 1.294608] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.294643] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.305024] ata4: SATA link down (SStatus 0 SControl 300) [ 1.315411] ata6: SATA link down (SStatus 0 SControl 300) [ 1.315473] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 1.315553] scsi 6:0:0:0: Direct-Access ATA WDC WD800JB-00FM 13.0 PQ: 0 ANSI: 5 [ 1.315711] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1.315718] sd 6:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.315748] sd 6:0:0:0: [sdb] Write Protect is off [ 1.315750] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.315766] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.315846] sdb: [ 1.315994] ata8: port disabled. ignoring. [ 1.339879] sdb1 sdb2 sdb3 < sdb5 > [ 1.364029] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1.364109] Freeing unused kernel memory: 660k freed [ 1.364431] Write protecting the kernel read-only data: 7580k [ 1.464901] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.465274] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 1.465327] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 1.465390] forcedeth 0000:00:08.0: setting latency timer to 64 [ 1.465445] nv_probe: set workaround bit for reversed mac addr [ 1.471629] usb 1-8: configuration #1 chosen from 1 choice [ 1.520778] Floppy drive(s): fd0 is 1.44M [ 1.539139] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 1.539195] alloc irq_desc for 18 on node 0 [ 1.539197] alloc kstat_irqs on node 0 [ 1.539204] ohci1394 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 1.545165] FDC 0 is a post-1991 82077 [ 1.549435] Initializing USB Mass Storage driver... [ 1.550900] scsi8 : SCSI emulation for USB Mass Storage devices [ 1.551388] usb-storage: device found at 2 [ 1.551391] usb-storage: waiting for device to settle before scanning [ 1.551412] usbcore: registered new interface driver usb-storage [ 1.551468] USB Mass Storage support registered. [ 1.590090] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fc004000-fc0047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.991270] usb 2-7: new low speed USB device using ohci_hcd and address 2 [ 2.000702] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:7d:d4:d1:ac [ 2.000765] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 2.225108] usb 2-7: configuration #1 chosen from 1 choice [ 2.240078] usbcore: registered new interface driver hiddev [ 2.246276] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input4 [ 2.246341] generic-usb 0003:0461:4D16.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-7/input0 [ 2.246355] usbcore: registered new interface driver usbhid [ 2.246358] usbhid: v2.6:USB HID core driver [ 2.561268] usb 2-9: new low speed USB device using ohci_hcd and address 3 [ 2.803109] usb 2-9: configuration #1 chosen from 1 choice [ 2.856788] xor: automatically using best checksumming function: generic_sse [ 2.901260] generic_sse: 8486.400 MB/sec [ 2.901262] xor: using function: generic_sse (8486.400 MB/sec) [ 2.953286] device-mapper: dm-raid45: initialized v0.2594b [ 2.973450] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001d7d5600da0e24] [ 3.140403] PM: Starting manual resume from disk [ 3.140408] PM: Resume from partition 8:21 [ 3.140409] PM: Checking hibernation image. [ 3.140623] PM: Resume from disk failed. [ 3.175381] kjournald starting. Commit interval 5 seconds [ 3.175392] EXT3-fs: mounted filesystem with writeback data mode. [ 3.976828] type=1505 audit(1256746164.745:2): operation="profile_load" pid=480 name=/usr/share/gdm/guest-session/Xsession [ 4.003188] type=1505 audit(1256746164.775:3): operation="profile_load" pid=481 name=/sbin/dhclient3 [ 4.003416] type=1505 audit(1256746164.775:4): operation="profile_load" pid=481 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.003541] type=1505 audit(1256746164.775:5): operation="profile_load" pid=481 name=/usr/lib/connman/scripts/dhclient-script [ 4.046498] type=1505 audit(1256746164.815:6): operation="profile_load" pid=482 name=/usr/bin/evince [ 4.050050] type=1505 audit(1256746164.815:7): operation="profile_load" pid=482 name=/usr/bin/evince-previewer [ 4.052229] type=1505 audit(1256746164.825:8): operation="profile_load" pid=482 name=/usr/bin/evince-thumbnailer [ 4.075325] type=1505 audit(1256746164.845:9): operation="profile_load" pid=484 name=/usr/lib/cups/backend/cups-pdf [ 4.075601] type=1505 audit(1256746164.845:10): operation="profile_load" pid=484 name=/usr/sbin/cupsd [ 5.525539] Adding 2016116k swap on /dev/sdb5. Priority:-1 extents:1 across:2016116k [ 6.208133] udev: starting version 147 [ 6.560197] usb-storage: device scan complete [ 6.561780] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 6.562275] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 6.562774] scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 6.563273] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 6.563586] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 6.563660] sd 8:0:0:1: Attached scsi generic sg4 type 0 [ 6.563739] sd 8:0:0:2: Attached scsi generic sg5 type 0 [ 6.563815] sd 8:0:0:3: Attached scsi generic sg6 type 0 [ 6.568277] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 6.568899] sd 8:0:0:1: [sdd] Attached SCSI removable disk [ 6.569526] sd 8:0:0:2: [sde] Attached SCSI removable disk [ 6.570150] sd 8:0:0:3: [sdf] Attached SCSI removable disk [ 6.591707] EXT3 FS on sdb2, internal journal [ 7.935667] kjournald starting. Commit interval 5 seconds [ 7.935887] EXT3 FS on sda2, internal journal [ 7.935892] EXT3-fs: mounted filesystem with writeback data mode. [ 8.513532] lp: driver loaded but no devices found [ 8.518521] parport_pc 00:0a: reported by Plug and Play ACPI [ 8.518568] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.591386] lp0: using parport0 (interrupt-driven). [ 8.604083] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.635634] EDAC MC: Ver: 2.1.0 Oct 16 2009 [ 8.637387] ppdev: user-space parallel port driver [ 8.638652] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 8.638673] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80 [ 9.066659] nvidia: module license 'NVIDIA' taints kernel. [ 9.066664] Disabling lock debugging due to kernel taint [ 9.072442] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 9.325476] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 9.325481] alloc irq_desc for 16 on node 0 [ 9.325483] alloc kstat_irqs on node 0 [ 9.325490] nvidia 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 9.325496] nvidia 0000:02:00.0: setting latency timer to 64 [ 9.325727] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 9.327280] EDAC amd64_edac: Ver: 3.2.0 Oct 16 2009 [ 9.328984] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 9.328989] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 9.328992] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 9.328993] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 9.328994] Might be a BIOS bug, if BIOS says ECC is enabled [ 9.328995] Use of the override can cause unknown side effects. [ 9.329010] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 10.341703] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 10.341709] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 10.341734] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 10.878160] __ratelimit: 6 callbacks suppressed [ 10.878163] type=1505 audit(1256760571.645:13): operation="profile_replace" pid=949 name=/usr/share/gdm/guest-session/Xsession [ 10.879736] type=1505 audit(1256760571.645:14): operation="profile_replace" pid=950 name=/sbin/dhclient3 [ 10.879959] type=1505 audit(1256760571.645:15): operation="profile_replace" pid=950 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.880105] type=1505 audit(1256760571.645:16): operation="profile_replace" pid=950 name=/usr/lib/connman/scripts/dhclient-script [ 10.883709] type=1505 audit(1256760571.655:17): operation="profile_replace" pid=951 name=/usr/bin/evince [ 10.887364] type=1505 audit(1256760571.655:18): operation="profile_replace" pid=951 name=/usr/bin/evince-previewer [ 10.889500] type=1505 audit(1256760571.655:19): operation="profile_replace" pid=951 name=/usr/bin/evince-thumbnailer [ 10.894211] type=1505 audit(1256760571.665:20): operation="profile_replace" pid=953 name=/usr/lib/cups/backend/cups-pdf [ 10.894489] type=1505 audit(1256760571.665:21): operation="profile_replace" pid=953 name=/usr/sbin/cupsd [ 10.950780] type=1505 audit(1256760571.715:22): operation="profile_replace" pid=954 name=/usr/sbin/ntpd [ 11.820103] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input5 [ 12.822044] /build/buildd/linux-2.6.31/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed [ 12.822054] generic-usb 0003:046D:C214.0002: timeout initializing reports [ 12.822126] input: Logitech Logitech Attack 3 as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input6 [ 12.822196] generic-usb 0003:046D:C214.0002: input,hidraw1: USB HID v1.10 Joystick [Logitech Logitech Attack 3] on usb-0000:00:02.0-9/input0 [ 13.161304] usb 2-10: new full speed USB device using ohci_hcd and address 4 [ 13.303723] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1714 [ 13.303752] usbcore: registered new interface driver usblp [ 13.388124] usb 2-10: configuration #1 chosen from 1 choice [ 13.459617] Linux video capture interface: v2.00 [ 13.475427] gspca: main v2.6.0 registered [ 13.483375] gspca: probing 046d:092e [ 13.657099] gspca: probe ok [ 13.657120] usbcore: registered new interface driver spca561 [ 13.657124] spca561: registered [ 17.815700] alloc irq_desc for 25 on node 0 [ 17.815703] alloc kstat_irqs on node 0 [ 17.815711] forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X [ 24.966413] usplash:400 freeing invalid memtype fffffffff9000000-fffffffff9e00000 [ 25.062096] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 25.062100] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance [ 25.062101] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 25.062102] vboxdrv: the usage of hardware performance counters by [ 25.062103] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 25.062319] vboxdrv: Found 2 processor cores. [ 25.062369] VBoxDrv: dbg - g_abExecMemory=ffffffffa0c14420 [ 25.062389] vboxdrv: fAsync=1 offMin=0xcac91 offMax=0xcac91 [ 25.062439] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 25.062441] vboxdrv: Successfully loaded version 3.0.8_OSE (interface 0x000e0000). [ 25.067256] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0db1ac0 [ 25.075897] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0dcc1c0 [ 28.041858] usb 1-8: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 28.301264] eth0: no IPv6 routers present [ 29.749829] CPU0 attaching NULL sched-domain. [ 29.749836] CPU1 attaching NULL sched-domain. [ 29.914692] CPU0 attaching sched-domain: [ 29.914696] domain 0: span 0-1 level MC [ 29.914698] groups: 0 1 [ 29.914701] domain 1: span 0-1 level CPU [ 29.914703] groups: 0-1 (__cpu_power = 2048) [ 29.914708] CPU1 attaching sched-domain: [ 29.914709] domain 0: span 0-1 level MC [ 29.914711] groups: 1 0 [ 29.914713] domain 1: span 0-1 level CPU [ 29.914715] groups: 0-1 (__cpu_power = 2048) [ 35.751516] CPU0 attaching NULL sched-domain. [ 35.751523] CPU1 attaching NULL sched-domain. [ 35.790070] CPU0 attaching sched-domain: [ 35.790074] domain 0: span 0-1 level MC [ 35.790076] groups: 0 1 [ 35.790081] CPU1 attaching sched-domain: [ 35.790083] domain 0: span 0-1 level MC [ 35.790084] groups: 1 0 [ 86.243682] UDF-fs: No VRS found [ 86.243686] UDF-fs: No partition found (1) [ 86.271692] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 86.273233] ISOFS: changing to secondary root [ 90.910039] Clocksource tsc unstable (delta = -308577953 ns) [ 1580.954095] CPU0 attaching NULL sched-domain. [ 1580.954103] CPU1 attaching NULL sched-domain. [ 1581.000090] CPU0 attaching sched-domain: [ 1581.000095] domain 0: span 0-1 level MC [ 1581.000098] groups: 0 1 [ 1581.000104] CPU1 attaching sched-domain: [ 1581.000107] domain 0: span 0-1 level MC [ 1581.000109] groups: 1 0 [ 1582.009588] PM: Syncing filesystems ... done. [ 1582.017318] PM: Preparing system for mem sleep [ 1582.017322] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 1582.018253] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 1582.018320] PM: Entering mem sleep [ 1582.018335] Suspending console(s) (use no_console_suspend to debug) [ 1582.101272] sd 6:0:0:0: [sdb] Synchronizing SCSI cache [ 1582.160767] sd 6:0:0:0: [sdb] Stopping disk [ 1582.180022] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1582.180113] sd 0:0:0:0: [sda] Stopping disk [ 1582.680116] ACPI handle has no context! [ 1582.680333] parport_pc 00:0a: disabled [ 1582.680503] serial 00:09: disabled [ 1582.710539] ACPI handle has no context! [ 1582.720325] forcedeth 0000:00:08.0: wake-up capability disabled by ACPI [ 1582.720329] forcedeth 0000:00:08.0: PME# disabled [ 1582.720333] forcedeth 0000:00:08.0: PCI INT A disabled [ 1582.870027] HDA Intel 0000:00:06.1: PCI INT B disabled [ 1582.890060] sata_nv 0000:00:05.2: PCI INT C disabled [ 1582.910088] sata_nv 0000:00:05.1: PCI INT B disabled [ 1582.930052] sata_nv 0000:00:05.0: PCI INT A disabled [ 1582.950060] ata8: port disabled. ignoring. [ 1582.970021] ehci_hcd 0000:00:02.1: PCI INT B disabled [ 1582.970025] ohci_hcd 0000:00:02.0: PCI INT A disabled [ 1582.970068] PM: suspend devices took 0.960 seconds [ 1582.970170] ehci_hcd 0000:00:02.1: PME# disabled [ 1582.990028] ohci_hcd 0000:00:02.0: PME# disabled [ 1583.010165] ACPI: Preparing to enter system sleep state S3 [ 1583.270357] Disabling non-boot CPUs ... [ 1583.380021] CPU 1 is now offline [ 1583.380023] SMP alternatives: switching to UP code [ 1583.384180] CPU0 attaching NULL sched-domain. [ 1583.384183] CPU1 attaching NULL sched-domain. [ 1583.384192] CPU0 attaching NULL sched-domain. [ 1583.384396] CPU1 is down [ 1583.384403] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 1583.384403] Back to C! [ 1583.384403] Enabling non-boot CPUs ... [ 1583.388196] SMP alternatives: switching to SMP code [ 1583.392169] Booting processor 1 APIC 0x1 ip 0x6000 [ 1583.384052] Initializing CPU#1 [ 1583.384052] Calibrating delay using timer specific routine.. 5428.54 BogoMIPS (lpj=27142733) [ 1583.384052] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 1583.384052] CPU: L2 Cache: 512K (64 bytes/line) [ 1583.384052] CPU 1/0x1 -> Node 0 [ 1583.384052] CPU: Physical Processor ID: 0 [ 1583.384052] CPU: Processor Core ID: 1 [ 1583.384052] mce: CPU supports 5 MCE banks [ 1583.384052] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 1583.550426] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 1583.550489] CPU0 attaching NULL sched-domain. [ 1583.560032] Switched to high resolution mode on CPU 1 [ 1583.590024] CPU0 attaching sched-domain: [ 1583.590026] domain 0: span 0-1 level MC [ 1583.590028] groups: 0 1 [ 1583.590032] CPU1 attaching sched-domain: [ 1583.590033] domain 0: span 0-1 level MC [ 1583.590035] groups: 1 0 [ 1583.590324] CPU1 is up [ 1583.590326] ACPI: Waking up from system sleep state S3 [ 1583.590534] pci 0000:00:00.0: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 1583.590642] ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) [ 1583.590651] ohci_hcd 0000:00:02.0: PME# disabled [ 1583.590660] ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [ 1583.590669] ehci_hcd 0000:00:02.1: PME# disabled [ 1583.590688] sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [ 1583.590734] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1583.590744] sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [ 1583.590788] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1583.590798] sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [ 1583.590842] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1583.590892] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1583.610028] HDA Intel 0000:00:06.1: restoring config space at offset 0xf (was 0x5020200, writing 0x502020b) [ 1583.610036] HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002) [ 1583.610085] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1583.630027] forcedeth 0000:00:08.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010105) [ 1583.630034] forcedeth 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [ 1583.630090] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1583.630100] pcieport-driver 0000:00:0f.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 1583.630160] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1583.650020] ohci1394 0000:01:0a.0: restoring config space at offset 0xf (was 0x4030100, writing 0x403010a) [ 1583.650030] ohci1394 0000:01:0a.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008) [ 1583.650034] ohci1394 0000:01:0a.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1583.650054] nvidia 0000:02:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0) [ 1583.650173] nForce2_smbus 0000:00:01.1: PME# disabled [ 1583.650176] ohci_hcd 0000:00:02.0: PME# disabled [ 1583.650183] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 1583.650186] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1583.680020] ehci_hcd 0000:00:02.1: PME# disabled [ 1583.680024] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 1583.680027] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1583.680033] pata_amd 0000:00:04.0: setting latency timer to 64 [ 1583.680044] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1583.680046] sata_nv 0000:00:05.0: setting latency timer to 64 [ 1583.680056] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1583.680059] sata_nv 0000:00:05.1: setting latency timer to 64 [ 1583.680068] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 1583.680070] sata_nv 0000:00:05.2: setting latency timer to 64 [ 1583.680079] pci 0000:00:06.0: setting latency timer to 64 [ 1583.680083] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 1583.680086] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 1583.681003] ata8: port disabled. ignoring. [ 1583.840043] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1583.860126] ata2.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out [ 1583.900130] ata2.00: configured for UDMA/100 [ 1584.020091] forcedeth 0000:00:08.0: wake-up capability disabled by ACPI [ 1584.020095] forcedeth 0000:00:08.0: PME# disabled [ 1584.440326] ata5: SATA link down (SStatus 0 SControl 300) [ 1584.450639] ata4: SATA link down (SStatus 0 SControl 300) [ 1584.460950] ata3: SATA link down (SStatus 0 SControl 300) [ 1584.471273] ata6: SATA link down (SStatus 0 SControl 300) [ 1584.610040] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fc004000-fc0047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1585.020672] serial 00:09: activated [ 1585.021290] parport_pc 00:0a: activated [ 1585.200095] sd 0:0:0:0: [sda] Starting disk [ 1585.971288] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1585.990128] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out [ 1586.264401] ata1.00: configured for UDMA/133 [ 1586.312481] sd 6:0:0:0: [sdb] Starting disk [ 1587.101488] ata7.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out [ 1587.101491] ata7.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 1587.120252] ata7: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13) [ 1587.160299] ata7.00: configured for UDMA/100 [ 1590.240014] [ 1590.240015] floppy driver state [ 1590.240016] ------------------- [ 1590.240018] now=4295096320 last interrupt=4294939225 diff=157095 last called handler=ffffffffa001b250 [ 1590.240020] timeout_message=lock fdc [ 1590.240021] last output bytes: [ 1590.240022] 8 80 4294937450 [ 1590.240023] 8 80 4294937450 [ 1590.240024] 8 80 4294937450 [ 1590.240025] 8 80 4294937450 [ 1590.240027] 12 80 4294939225 [ 1590.240028] 0 90 4294939225 [ 1590.240029] 13 90 4294939225 [ 1590.240030] 0 90 4294939225 [ 1590.240031] 1a 90 4294939225 [ 1590.240032] 0 90 4294939225 [ 1590.240034] 3 90 4294939225 [ 1590.240035] c1 90 4294939225 [ 1590.240036] 10 90 4294939225 [ 1590.240037] 7 80 4294939225 [ 1590.240038] 0 90 4294939225 [ 1590.240039] 8 81 4294939225 [ 1590.240040] f 80 4294939225 [ 1590.240041] 0 90 4294939225 [ 1590.240042] 1 91 4294939225 [ 1590.240044] 8 81 4294939225 [ 1590.240044] last result at 4294939225 [ 1590.240045] last redo_fd_request at 4294939227 [ 1590.240046] 20 1 [ 1590.240056] status=0 [ 1590.240057] fdc_busy=1 [ 1590.240058] do_floppy=ffffffffa0016b70 [ 1590.240059] cont=ffffffffa00213a0 [ 1590.240060] current_req=(null) [ 1590.240061] command_status=-1 [ 1590.240062] [ 1590.240064] floppy0: floppy timeout called [ 1590.583426] PM: resume devices took 6.930 seconds [ 1590.583427] ------------[ cut here ]------------ [ 1590.583434] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:52 suspend_test_finish+0x7c/0x80() [ 1590.583436] Hardware name: [ 1590.583437] Component: resume devices [ 1590.583438] Modules linked in: isofs udf crc_itu_t binfmt_misc vboxnetflt vboxnetadp vboxdrv gspca_spca561 gspca_main videodev v4l1_compat v4l2_compat_ioctl32 usblp joydev snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore amd64_edac_mod snd_page_alloc iptable_filter k8temp nvidia(P) ppdev i2c_nforce2 edac_core ip_tables parport_pc lp x_tables parport dm_raid45 xor usbhid usb_storage ohci1394 ieee1394 floppy forcedeth [ 1590.583468] Pid: 2906, comm: pm-suspend Tainted: P 2.6.31-14-generic #48-Ubuntu [ 1590.583470] Call Trace: [ 1590.583476] [] warn_slowpath_common+0x78/0xb0 [ 1590.583478] [] warn_slowpath_fmt+0x3c/0x40 [ 1590.583481] [] suspend_test_finish+0x7c/0x80 [ 1590.583484] [] suspend_devices_and_enter+0xa9/0xe0 [ 1590.583487] [] enter_state+0xd8/0x110 [ 1590.583489] [] state_store+0x92/0x100 [ 1590.583493] [] kobj_attr_store+0x17/0x20 [ 1590.583497] [] sysfs_write_file+0xe0/0x160 [ 1590.583501] [] vfs_write+0xb8/0x1a0 [ 1590.583505] [] ? do_page_fault+0x194/0x370 [ 1590.583507] [] sys_write+0x4c/0x80 [ 1590.583511] [] system_call_fastpath+0x16/0x1b [ 1590.583513] ---[ end trace 9c27a8635e8d0732 ]--- [ 1590.583546] PM: Finishing wakeup. [ 1590.583548] Restarting tasks ... done. [ 1590.725393] forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X [ 1590.989020] CPU0 attaching NULL sched-domain. [ 1590.989027] CPU1 attaching NULL sched-domain. [ 1591.030497] CPU0 attaching sched-domain: [ 1591.030501] domain 0: span 0-1 level MC [ 1591.030505] groups: 0 1 [ 1591.030509] domain 1: span 0-1 level CPU [ 1591.030512] groups: 0-1 (__cpu_power = 2048) [ 1591.030517] CPU1 attaching sched-domain: [ 1591.030519] domain 0: span 0-1 level MC [ 1591.030522] groups: 1 0 [ 1591.030525] domain 1: span 0-1 level CPU [ 1591.030528] groups: 0-1 (__cpu_power = 2048) [ 1591.091144] VFS: busy inodes on changed media or resized disk sr0 [ 1591.569527] VFS: busy inodes on changed media or resized disk sr0 [ 1592.528695] VFS: busy inodes on changed media or resized disk sr0 [ 1592.842188] VFS: busy inodes on changed media or resized disk sr0 [ 1601.110039] eth0: no IPv6 routers present