| 2009-09-19 00:32:37 |
ubuntic |
bug |
|
|
added bug |
| 2009-09-19 00:40:41 |
ubuntic |
tags |
|
battery hibernate laptop notebook packaging standby |
|
| 2009-09-19 09:11:10 |
Xandros Pilosa |
affects |
ubuntu |
pm-utils (Ubuntu) |
|
| 2009-09-24 21:55:21 |
ubuntic |
nominated for series |
|
Ubuntu Karmic |
|
| 2009-09-30 08:44:38 |
ubuntic |
description |
The laptop goes in hilbernate or standby even i (un-)plugged AC while i use AC and Battery together.
I need to pluggin AC back and restart again.
The same problem if i do: - using Ac without battery
- using only battery (until Gnome login no problem, but immediatley after)
My Laptop Samsung R50, 1,5gb ram, ATI X700, 160gb hd, Karmic Koala apha 6
BUT: No problems until 9.04 (6.10 since)
not the same but little bit equal bug #51271 |
The laptop goes in hilbernate or standby even i (un-)plugged AC while AC is plugged in.
I need to pluggin AC back and restart again, because the weakingup hangs.
The same problem if i do:
- working on Ac, and i pluggin battery and let ac plugged in
- starting on battery until Gnome login, than after login, few seconds after, the system goes down (sdandby or hilbernate), i can' change anything.
My Laptop Samsung R50 WVM 1730 II, 1,5gb ram, ATI X700, 160gb hd, Karmic Koala apha 6
BUT: No problems until 9.04 (6.10 since)
not the same but little bit equal bug #51271
|
|
| 2009-09-30 11:04:03 |
ubuntic |
description |
The laptop goes in hilbernate or standby even i (un-)plugged AC while AC is plugged in.
I need to pluggin AC back and restart again, because the weakingup hangs.
The same problem if i do:
- working on Ac, and i pluggin battery and let ac plugged in
- starting on battery until Gnome login, than after login, few seconds after, the system goes down (sdandby or hilbernate), i can' change anything.
My Laptop Samsung R50 WVM 1730 II, 1,5gb ram, ATI X700, 160gb hd, Karmic Koala apha 6
BUT: No problems until 9.04 (6.10 since)
not the same but little bit equal bug #51271
|
Laptop goes in hilbernate or standby even i plugged in/out battery while AC is plugged in and working in Gnome.
I need to pluggin AC back and restart again, because the weakingup hangs.
I couldn't find any help in Wikis, Forums or logs
The same problem if i do:
- starting only on battery until Gnome login, than after login, few seconds after, the system goes down (sdandby or hilbernate), i can' change anything.
My Laptop Samsung R50 WVM 1730 II, 1,5gb ram, ATI X700, 160gb hd, Karmic Koala apha 6
BUT: No problems upto Jaunty .
not the same but little bit equal bug #51271
I tried out today, that the fail is according to something in gnome!, because in KDE i haven't any problem
thanks all
|
|
| 2009-09-30 11:05:44 |
ubuntic |
bug task added |
|
gnome-power |
|
| 2009-09-30 11:07:43 |
ubuntic |
description |
Laptop goes in hilbernate or standby even i plugged in/out battery while AC is plugged in and working in Gnome.
I need to pluggin AC back and restart again, because the weakingup hangs.
I couldn't find any help in Wikis, Forums or logs
The same problem if i do:
- starting only on battery until Gnome login, than after login, few seconds after, the system goes down (sdandby or hilbernate), i can' change anything.
My Laptop Samsung R50 WVM 1730 II, 1,5gb ram, ATI X700, 160gb hd, Karmic Koala apha 6
BUT: No problems upto Jaunty .
not the same but little bit equal bug #51271
I tried out today, that the fail is according to something in gnome!, because in KDE i haven't any problem
thanks all
|
Laptop goes in hilbernate or standby even i plugged in/out battery while AC is plugged in and working in Gnome.
I need to pluggin AC back and restart again, because the weakingup hangs.
I couldn't find any help in Wikis, Forums or logs
The same problem if i do:
- starting only on battery until Gnome login, than after login, few seconds after, the system goes down (sdandby or hilbernate), i can' change anything.
My Laptop Samsung R50 WVM 1730 II, 1,5gb ram, ATI X700, 160gb hd, Karmic Koala apha 6
BUT: No problems upto Jaunty .
I tried out today, that the fail is according to something in gnome!, because in KDE i haven't any problem
thanks all
|
|
| 2009-09-30 11:46:53 |
ubuntic |
nominated for series |
|
gnome-power/trunk |
|
| 2009-10-03 16:37:17 |
ubuntic |
pm-utils (Ubuntu): assignee |
|
ubuntic (scoop2) |
|
| 2009-10-03 16:37:21 |
ubuntic |
gnome-power: assignee |
|
ubuntic (scoop2) |
|
| 2009-10-03 16:39:01 |
ubuntic |
pm-utils (Ubuntu): assignee |
ubuntic (scoop2) |
|
|
| 2009-10-03 16:39:03 |
ubuntic |
gnome-power: assignee |
ubuntic (scoop2) |
|
|
| 2009-10-03 16:40:41 |
ubuntic |
tags |
battery hibernate laptop notebook packaging standby |
battery gnome hibernate laptop notebook packaging standby |
|
| 2009-10-05 19:31:01 |
ubuntic |
description |
Laptop goes in hilbernate or standby even i plugged in/out battery while AC is plugged in and working in Gnome.
I need to pluggin AC back and restart again, because the weakingup hangs.
I couldn't find any help in Wikis, Forums or logs
The same problem if i do:
- starting only on battery until Gnome login, than after login, few seconds after, the system goes down (sdandby or hilbernate), i can' change anything.
My Laptop Samsung R50 WVM 1730 II, 1,5gb ram, ATI X700, 160gb hd, Karmic Koala apha 6
BUT: No problems upto Jaunty .
I tried out today, that the fail is according to something in gnome!, because in KDE i haven't any problem
thanks all
|
I installed Karmic-beta (9.10) ubuntu on my laptop SAmsung r-50.
In the standart installation with succesfull configured wpa.
I charge the battery full and start the laptop with both battery and AC are
plugged in. I login into gnome desktop. Until now any problems.
But if i plugged out the battery, after a few time the system goes down without
any warnings.
The failure is that the system goes completly down (hilbernate or suspend, i
don't know), but only the blue-led on the front of the laptop is blinking.
I need to restart. With only AC booting no problems.
The same if i boot with only the (full)battery until "gdm login window" no
problem, but after i login into gnome a few time later (5sec - 1min.) the
system close the screen session and goes standby or hilbernate.
But if i install the kde-desktop and login, a can work with battery without ac.
And if i install jaunty standard back, i haven't any problems with battery plugging
During the installation of Ubuntu Karmic i haven't any problems.
Steps to reproduce:
1. Plug the power cable an battery
2. Start the System and login into Gnome
3. work a little bit an plugg out the battery (working until putting out, no
probs)
4. On my laptop the, few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking
The same:
1. Plug battery
2. Start the System and login into Gnome
3. I can't work a long because after a few seconds Point 4 happends
4. On my laptop the, few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking
thanks all
|
|
| 2009-10-05 19:35:06 |
ubuntic |
description |
I installed Karmic-beta (9.10) ubuntu on my laptop SAmsung r-50.
In the standart installation with succesfull configured wpa.
I charge the battery full and start the laptop with both battery and AC are
plugged in. I login into gnome desktop. Until now any problems.
But if i plugged out the battery, after a few time the system goes down without
any warnings.
The failure is that the system goes completly down (hilbernate or suspend, i
don't know), but only the blue-led on the front of the laptop is blinking.
I need to restart. With only AC booting no problems.
The same if i boot with only the (full)battery until "gdm login window" no
problem, but after i login into gnome a few time later (5sec - 1min.) the
system close the screen session and goes standby or hilbernate.
But if i install the kde-desktop and login, a can work with battery without ac.
And if i install jaunty standard back, i haven't any problems with battery plugging
During the installation of Ubuntu Karmic i haven't any problems.
Steps to reproduce:
1. Plug the power cable an battery
2. Start the System and login into Gnome
3. work a little bit an plugg out the battery (working until putting out, no
probs)
4. On my laptop the, few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking
The same:
1. Plug battery
2. Start the System and login into Gnome
3. I can't work a long because after a few seconds Point 4 happends
4. On my laptop the, few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking
thanks all
|
I installed Karmic-beta (9.10) ubuntu on my laptop SAmsung r-50.
In the standart installation with succesfull configured wpa.
I charge the battery full and start the laptop with both battery and AC are
plugged in. I login into gnome desktop. Until now any problems.
But if i plugged out the battery, after a few time the system goes down without
any warnings.
The failure is that the system goes completly down (hilbernate or suspend, i
don't know), but only the blue-led on the front of the laptop is blinking.
I need to restart. With only AC booting no problems.
The same if i boot with only the (full)battery until "gdm login window" no
problem, but after i login into gnome a few time later (5sec - 1min.) the
system close the screen session and goes standby or hilbernate.
But on kde-desktop i can login and can work with battery without ac.
And on jaunty standard installation, i haven't any problems with battery plugging
During the installation of Ubuntu Karmic i haven't any problems.
Steps to reproduce:
1. Plug the power cable an battery
2. Start the System and login into Gnome
3. work a little bit and plugg out the battery (working until putting out, no
probs)
4. On my laptop few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking.
The same failure: (starting with only battery)
1. Plug battery
2. Start the System and login into Gnome
3. I can't work a long because after a few seconds Point 4 happends
4. On my laptop the, few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking
thanks all
|
|
| 2009-10-05 19:37:07 |
ubuntic |
description |
I installed Karmic-beta (9.10) ubuntu on my laptop SAmsung r-50.
In the standart installation with succesfull configured wpa.
I charge the battery full and start the laptop with both battery and AC are
plugged in. I login into gnome desktop. Until now any problems.
But if i plugged out the battery, after a few time the system goes down without
any warnings.
The failure is that the system goes completly down (hilbernate or suspend, i
don't know), but only the blue-led on the front of the laptop is blinking.
I need to restart. With only AC booting no problems.
The same if i boot with only the (full)battery until "gdm login window" no
problem, but after i login into gnome a few time later (5sec - 1min.) the
system close the screen session and goes standby or hilbernate.
But on kde-desktop i can login and can work with battery without ac.
And on jaunty standard installation, i haven't any problems with battery plugging
During the installation of Ubuntu Karmic i haven't any problems.
Steps to reproduce:
1. Plug the power cable an battery
2. Start the System and login into Gnome
3. work a little bit and plugg out the battery (working until putting out, no
probs)
4. On my laptop few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking.
The same failure: (starting with only battery)
1. Plug battery
2. Start the System and login into Gnome
3. I can't work a long because after a few seconds Point 4 happends
4. On my laptop the, few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking
thanks all
|
I installed Karmic-beta (9.10) ubuntu on my laptop SAmsung r-50.
In the standart installation with succesfull configured wpa.
I charge the battery full and start the laptop with both battery and AC are
plugged in. I login into gnome desktop. Until now any problems.
But if i plugged out the battery, after a few time the system goes down without
any warnings.
The failure is that the system goes completly down (hilbernate or suspend, i
don't know), but only the blue-led on the front of the laptop is blinking.
I need to restart. With only AC booting no problems.
The same if i boot with only the (full)battery until "gdm login window" no
problem, but after i login into gnome a few time later (5sec - 1min.) the
system close the screen session and goes standby or hilbernate.
But on kde-desktop i can login and can work with battery without ac.
And on jaunty standard installation, i haven't any problems with battery plugging
During the installation of Ubuntu Karmic i haven't any problems.
Steps to reproduce:
1. Plug the power cable an battery
2. Start the System and login into Gnome
3. work a little bit and plugg out the battery (working until putting out, no
probs)
4. On my laptop few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking.
The same failure: (starting with only battery)
1. Plug battery
2. Start the System and login into Gnome
3. I can't work a long because after a few seconds Point 4 happends
4. On my laptop the, few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking
thanks all
I have have the german language configured during Karimc installation, if its importent. |
|
| 2009-10-05 19:39:15 |
ubuntic |
summary |
laptop goes standby after ac or battery unplugging |
laptop goes standby after gnome login on battery |
|
| 2009-11-11 20:28:55 |
Alessio "Spinus" Moscatello |
pm-utils (Ubuntu): status |
New |
Confirmed |
|
| 2009-11-11 21:04:38 |
Alessio "Spinus" Moscatello |
pm-utils (Ubuntu): status |
Confirmed |
New |
|
| 2009-11-11 21:13:54 |
Alessio "Spinus" Moscatello |
attachment added |
|
pm-suspend.log http://launchpadlibrarian.net/35549514/pm-suspend.log |
|
| 2009-11-12 21:29:00 |
Zapter |
marked as duplicate |
|
427629 |
|
| 2009-11-15 11:50:38 |
Icusnik |
description |
I installed Karmic-beta (9.10) ubuntu on my laptop SAmsung r-50.
In the standart installation with succesfull configured wpa.
I charge the battery full and start the laptop with both battery and AC are
plugged in. I login into gnome desktop. Until now any problems.
But if i plugged out the battery, after a few time the system goes down without
any warnings.
The failure is that the system goes completly down (hilbernate or suspend, i
don't know), but only the blue-led on the front of the laptop is blinking.
I need to restart. With only AC booting no problems.
The same if i boot with only the (full)battery until "gdm login window" no
problem, but after i login into gnome a few time later (5sec - 1min.) the
system close the screen session and goes standby or hilbernate.
But on kde-desktop i can login and can work with battery without ac.
And on jaunty standard installation, i haven't any problems with battery plugging
During the installation of Ubuntu Karmic i haven't any problems.
Steps to reproduce:
1. Plug the power cable an battery
2. Start the System and login into Gnome
3. work a little bit and plugg out the battery (working until putting out, no
probs)
4. On my laptop few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking.
The same failure: (starting with only battery)
1. Plug battery
2. Start the System and login into Gnome
3. I can't work a long because after a few seconds Point 4 happends
4. On my laptop the, few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking
thanks all
I have have the german language configured during Karimc installation, if its importent. |
I installed Karmic-beta (9.10) ubuntu on my laptop SAmsung r-50.
In the standart installation with succesfull configured wpa.
I charge the battery full and start the laptop with both battery and AC are
plugged in. I login into gnome desktop. Until now any problems.
But if i plugged out the battery, after a few time the system goes down without
any warnings.
The failure is that the system goes completly down (hilbernate or suspend, i
don't know), but only the blue-led on the front of the laptop is blinking.
I need to restart. With only AC booting no problems.
The same if i boot with only the (full)battery until "gdm login window" no
problem, but after i login into gnome a few time later (5sec - 1min.) the
system close the screen session and goes standby or hilbernate.
But on kde-desktop i can login and can work with battery without ac.
And on jaunty standard installation, i haven't any problems with battery plugging
During the installation of Ubuntu Karmic i haven't any problems.
Steps to reproduce:
1. Plug the power cable an battery
2. Start the System and login into Gnome
3. work a little bit and plugg out the battery (working until putting out, no
probs)
4. On my laptop few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking.
The same failure: (starting with only battery)
1. Plug battery
2. Start the System and login into Gnome
3. I can't work a long because after a few seconds Point 4 happends
4. On my laptop the, few sec. later my screen session is going to close and
goes standby (hilbernate or suspend) because the blue-led is blinking
thanks all
I have have the german language configured during Karimc installation, if its importent.
|
|
