[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x3fef0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fef0000 (usable) [ 0.000000] modified: 000000003fef0000 - 000000003fef3000 (ACPI NVS) [ 0.000000] modified: 000000003fef3000 - 000000003ff00000 (ACPI data) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378bf000 - 37fef4ad [ 0.000000] Allocated new RAMDISK: 00881000 - 00fb14ad [ 0.000000] Move RAMDISK from 00000000378bf000 - 0000000037fef4ac to 00881000 - 00fb14ac [ 0.000000] ACPI: RSDP 000F7810, 0024 (r2 HP-CPC) [ 0.000000] ACPI: XSDT 3FEF30C0, 004C (r1 HP-CPC ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FEFA3C0, 00F4 (r3 HP-CPC ASUSACPI 42302E31 AWRD 0) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT 3FEF3280, 70FD (r1 HP-CPC ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 3FEF0000, 0040 [ 0.000000] ACPI: SSDT 3FEFA5C0, 0248 (r1 HP-CPC POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 3FEFA880, 0038 (r1 HP-CPC ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 3FEFA900, 003C (r1 HP-CPC ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 3FEFA500, 007C (r1 HP-CPC ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 138MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c] [ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000881000 - 0000fb14ad] NEW RAMDISK ==> [0000881000 - 0000fb14ad] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f5c20] 000f5c20 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003fef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fef0 [ 0.000000] On node 0 totalpages: 261759 [ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 278 pages used for memmap [ 0.000000] HighMem zone: 35292 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259713 [ 0.000000] Kernel command line: root=UUID=9cd9c6e0-0131-41be-ae04-bee8dd43a6ae ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2404.948 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 5237120 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 1017480k/1047488k available (4126k kernel code, 29284k reserved, 2208k data, 532k init, 142280k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB) [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4809.89 BogoMIPS (lpj=9619792) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using C1E aware idle routine [ 0.004000] Checking 'hlt' instruction... OK. [ 0.017763] ACPI: Core revision 20080926 [ 0.019908] ACPI: Checking initramfs for custom DSDT [ 0.256620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.297650] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02 [ 0.300001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4810.06 BogoMIPS (lpj=9620139) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.384216] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02 [ 0.384263] Brought up 2 CPUs [ 0.384265] Total of 2 processors activated (9619.96 BogoMIPS). [ 0.384368] CPU0 attaching sched-domain: [ 0.384371] domain 0: span 0-1 level CPU [ 0.384373] groups: 0 1 [ 0.384378] CPU1 attaching sched-domain: [ 0.384380] domain 0: span 0-1 level CPU [ 0.384382] groups: 1 0 [ 0.384437] net_namespace: 776 bytes [ 0.384437] Booting paravirtualized kernel on bare hardware [ 0.384437] Time: 8:38:16 Date: 04/25/09 [ 0.384437] regulator: core version 0.5 [ 0.384437] NET: Registered protocol family 16 [ 0.384437] EISA bus registered [ 0.384437] ACPI: bus type pci registered [ 0.384437] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.384437] PCI: MCFG area at f0000000 reserved in E820 [ 0.384437] PCI: Using MMCONFIG for extended config space [ 0.384437] PCI: Using configuration type 1 for base access [ 0.385019] ACPI: EC: Look up EC in DSDT [ 0.396068] ACPI: Interpreter enabled [ 0.396071] ACPI: (supports S0 S1 S3 S4 S5) [ 0.396092] ACPI: Using IOAPIC for interrupt routing [ 0.405028] ACPI: No dock devices found. [ 0.405038] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.405232] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.405234] pci 0000:00:02.0: PME# disabled [ 0.405255] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.405257] pci 0000:00:04.0: PME# disabled [ 0.405454] pci 0000:00:0a.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.405459] pci 0000:00:0a.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.405471] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.405476] pci 0000:00:0a.1: PME# disabled [ 0.405533] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.405553] pci 0000:00:0b.0: supports D1 D2 [ 0.405555] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.405558] pci 0000:00:0b.0: PME# disabled [ 0.405580] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.405600] pci 0000:00:0b.1: supports D1 D2 [ 0.405602] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.405605] pci 0000:00:0b.1: PME# disabled [ 0.405638] pci 0000:00:0d.0: reg 20 io port: [0xf400-0xf40f] [ 0.405671] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.405675] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.405679] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.405683] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.405687] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f] [ 0.405691] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.405724] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7] [ 0.405728] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3] [ 0.405732] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967] [ 0.405736] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63] [ 0.405740] pci 0000:00:0f.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.405744] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.405803] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.405824] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.405827] pci 0000:00:10.1: PME# disabled [ 0.405855] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.405859] pci 0000:00:14.0: reg 14 io port: [0xc800-0xc807] [ 0.405875] pci 0000:00:14.0: supports D1 D2 [ 0.405877] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.405880] pci 0000:00:14.0: PME# disabled [ 0.405969] pci 0000:00:02.0: bridge io port: [0xb000-0xbfff] [ 0.405971] pci 0000:00:02.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.405974] pci 0000:00:02.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] [ 0.405994] pci 0000:02:00.0: reg 10 64bit mmio: [0xe0000000-0xefffffff] [ 0.406000] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdbf0000-0xfdbfffff] [ 0.406004] pci 0000:02:00.0: reg 20 io port: [0x9c00-0x9cff] [ 0.406010] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdbc0000-0xfdbdffff] [ 0.406016] pci 0000:02:00.0: supports D1 D2 [ 0.406036] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdbe0000-0xfdbeffff] [ 0.406052] pci 0000:02:00.1: supports D1 D2 [ 0.406089] pci 0000:00:04.0: bridge io port: [0x9000-0x9fff] [ 0.406091] pci 0000:00:04.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.406094] pci 0000:00:04.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.406122] pci 0000:03:05.0: reg 10 32bit mmio: [0xfddff000-0xfddfffff] [ 0.406149] pci 0000:03:05.0: supports D1 D2 [ 0.406151] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot [ 0.406154] pci 0000:03:05.0: PME# disabled [ 0.406173] pci 0000:03:09.0: reg 10 32bit mmio: [0xfddfe000-0xfddfe1ff] [ 0.406219] pci 0000:03:0a.0: reg 10 32bit mmio: [0xfdde0000-0xfddeffff] [ 0.406271] pci 0000:00:10.0: transparent bridge [ 0.406273] pci 0000:00:10.0: bridge io port: [0xa000-0xafff] [ 0.406276] pci 0000:00:10.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.406279] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.406286] bus 00 -> node 0 [ 0.406293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.406655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.502325] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.502533] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 *7 9 10 11 14 15) [ 0.502740] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15) [ 0.502947] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 0.503153] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15) [ 0.503358] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.503564] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.503771] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.503981] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.504197] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.504404] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.504609] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.504817] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 0.505022] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.505228] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.505435] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.505646] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15) [ 0.505851] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.506059] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.506265] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.506506] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.506743] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.506979] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.507214] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.507450] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.507685] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.507921] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.508167] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.508404] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 0.508640] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. [ 0.508877] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 0.509114] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. [ 0.509351] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled. [ 0.509587] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0 [ 0.509824] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 0.510061] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0 [ 0.510297] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 0.510534] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 0.510771] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.511009] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0 [ 0.511245] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0 [ 0.511395] ACPI: WMI: Mapper loaded [ 0.511457] SCSI subsystem initialized [ 0.511457] libata version 3.00 loaded. [ 0.511457] usbcore: registered new interface driver usbfs [ 0.511457] usbcore: registered new interface driver hub [ 0.511457] usbcore: registered new device driver usb [ 0.511457] PCI: Using ACPI for IRQ routing [ 0.516009] Bluetooth: Core ver 2.13 [ 0.516022] NET: Registered protocol family 31 [ 0.516022] Bluetooth: HCI device and connection manager initialized [ 0.516022] Bluetooth: HCI socket layer initialized [ 0.516022] NET: Registered protocol family 8 [ 0.516022] NET: Registered protocol family 20 [ 0.516028] NetLabel: Initializing [ 0.516030] NetLabel: domain hash size = 128 [ 0.516031] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.516044] NetLabel: unlabeled traffic allowed by default [ 0.516059] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.516063] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.520064] AppArmor: AppArmor Filesystem Enabled [ 0.524016] Switched to high resolution mode on CPU 0 [ 0.524277] Switched to high resolution mode on CPU 1 [ 0.528016] pnp: PnP ACPI init [ 0.528026] ACPI: bus type pnp registered [ 0.533345] pnp: PnP ACPI: found 10 devices [ 0.533346] ACPI: ACPI bus type pnp unregistered [ 0.533350] PnPBIOS: Disabled by ACPI PNP [ 0.533357] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.533360] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.533362] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.533365] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.533367] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.533370] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.533372] system 00:01: ioport range 0x2000-0x207f has been reserved [ 0.533374] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 0.533379] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.533382] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.533391] system 00:08: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.533395] system 00:09: iomem range 0xf0000-0xf3fff could not be reserved [ 0.533398] system 00:09: iomem range 0xf4000-0xf7fff could not be reserved [ 0.533400] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 0.533403] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 0.533405] system 00:09: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.533408] system 00:09: iomem range 0x3fef0000-0x3fefffff could not be reserved [ 0.533410] system 00:09: iomem range 0xffff0000-0xffffffff has been reserved [ 0.533413] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.533415] system 00:09: iomem range 0x100000-0x3feeffff could not be reserved [ 0.533418] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.533420] system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.533423] system 00:09: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.533426] system 00:09: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.533428] system 00:09: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.533431] system 00:09: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.568113] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.568116] pci 0000:00:02.0: IO window: 0xb000-0xbfff [ 0.568119] pci 0000:00:02.0: MEM window: 0xfda00000-0xfdafffff [ 0.568121] pci 0000:00:02.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.568125] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.568127] pci 0000:00:04.0: IO window: 0x9000-0x9fff [ 0.568130] pci 0000:00:04.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.568132] pci 0000:00:04.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.568136] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.568138] pci 0000:00:10.0: IO window: 0xa000-0xafff [ 0.568141] pci 0000:00:10.0: MEM window: 0xfdd00000-0xfddfffff [ 0.568144] pci 0000:00:10.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.568153] pci 0000:00:02.0: setting latency timer to 64 [ 0.568157] pci 0000:00:04.0: setting latency timer to 64 [ 0.568161] pci 0000:00:10.0: setting latency timer to 64 [ 0.568164] bus: 00 index 0 io port: [0x00-0xffff] [ 0.568165] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.568167] bus: 01 index 0 io port: [0xb000-0xbfff] [ 0.568169] bus: 01 index 1 mmio: [0xfda00000-0xfdafffff] [ 0.568171] bus: 01 index 2 mmio: [0xfde00000-0xfdefffff] [ 0.568173] bus: 01 index 3 mmio: [0x0-0x0] [ 0.568174] bus: 02 index 0 io port: [0x9000-0x9fff] [ 0.568176] bus: 02 index 1 mmio: [0xfdb00000-0xfdbfffff] [ 0.568178] bus: 02 index 2 mmio: [0xe0000000-0xefffffff] [ 0.568180] bus: 02 index 3 mmio: [0x0-0x0] [ 0.568181] bus: 03 index 0 io port: [0xa000-0xafff] [ 0.568183] bus: 03 index 1 mmio: [0xfdd00000-0xfddfffff] [ 0.568185] bus: 03 index 2 mmio: [0xfdc00000-0xfdcfffff] [ 0.568186] bus: 03 index 3 io port: [0x00-0xffff] [ 0.568188] bus: 03 index 4 mmio: [0x000000-0xffffffff] [ 0.568197] NET: Registered protocol family 2 [ 0.580055] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.580303] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.580915] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.581241] TCP: Hash tables configured (established 131072 bind 65536) [ 0.581244] TCP reno registered [ 0.588079] NET: Registered protocol family 1 [ 0.588191] checking if image is initramfs... it is [ 1.070988] Freeing initrd memory: 7361k freed [ 1.071179] cpufreq: No nForce2 chipset. [ 1.071288] audit: initializing netlink socket (disabled) [ 1.071305] type=2000 audit(1240648696.068:1): initialized [ 1.077983] highmem bounce pool size: 64 pages [ 1.077988] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.079011] VFS: Disk quotas dquot_6.5.1 [ 1.079056] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.079549] fuse init (API version 7.10) [ 1.079612] msgmni has been set to 1724 [ 1.079792] alg: No test for stdrng (krng) [ 1.079803] io scheduler noop registered [ 1.079804] io scheduler anticipatory registered [ 1.079806] io scheduler deadline registered [ 1.079819] io scheduler cfq registered (default) [ 1.079832] pci 0000:00:00.0: Enabling HT MSI Mapping [ 1.079866] pci 0000:00:02.0: Enabling HT MSI Mapping [ 1.079874] pci 0000:00:04.0: Enabling HT MSI Mapping [ 1.079896] pci 0000:00:09.0: Enabling HT MSI Mapping [ 1.108030] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 1.108041] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 1.108050] pci 0000:00:10.0: Enabling HT MSI Mapping [ 1.108061] pci 0000:00:10.1: Enabling HT MSI Mapping [ 1.108075] pci 0000:02:00.0: Boot video device [ 1.115165] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 1.115186] pcieport-driver 0000:00:02.0: found MSI capability [ 1.115200] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X [ 1.115206] pci_express 0000:00:02.0:pcie00: allocate port service [ 1.115218] pci_express 0000:00:02.0:pcie03: allocate port service [ 1.115248] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 1.115267] pcieport-driver 0000:00:04.0: found MSI capability [ 1.115277] pcieport-driver 0000:00:04.0: irq 2302 for MSI/MSI-X [ 1.115282] pci_express 0000:00:04.0:pcie00: allocate port service [ 1.115292] pci_express 0000:00:04.0:pcie03: allocate port service [ 1.115331] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.115339] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.115470] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.115473] ACPI: Power Button (FF) [PWRF] [ 1.115508] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.115510] ACPI: Power Button (CM) [PWRB] [ 1.115562] fan PNP0C0B:00: registered as cooling_device0 [ 1.115567] ACPI: Fan [FAN] (on) [ 1.115957] processor ACPI_CPU:00: registered as cooling_device1 [ 1.115984] processor ACPI_CPU:01: registered as cooling_device2 [ 1.121593] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.123651] ACPI: Thermal Zone [THRM] (40 C) [ 1.123692] isapnp: Scanning for PnP cards... [ 1.476332] isapnp: No Plug & Play device found [ 1.485226] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.485989] brd: module loaded [ 1.486244] loop: module loaded [ 1.486305] Fixed MDIO Bus: probed [ 1.486311] PPP generic driver version 2.4.2 [ 1.486358] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.486382] Driver 'sd' needs updating - please use bus_type methods [ 1.486392] Driver 'sr' needs updating - please use bus_type methods [ 1.486555] sata_nv 0000:00:0e.0: version 3.5 [ 1.486940] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 1.486951] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.486954] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.487007] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.487164] scsi0 : sata_nv [ 1.487261] scsi1 : sata_nv [ 1.487422] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23 [ 1.487425] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23 [ 2.364044] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.372181] ata1.00: ATA-7: ST3320820AS, 3.AHG, max UDMA/100 [ 2.372183] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 2.388185] ata1.00: configured for UDMA/100 [ 3.122425] ata2: SATA link down (SStatus 0 SControl 310) [ 3.122542] scsi 0:0:0:0: Direct-Access ATA ST3320820AS 3.AH PQ: 0 ANSI: 5 [ 3.122627] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 3.122641] sd 0:0:0:0: [sda] Write Protect is off [ 3.122643] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.122662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.122724] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 3.122735] sd 0:0:0:0: [sda] Write Protect is off [ 3.122737] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.122755] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.122758] sda: sda1 sda2 < sda5 sda6 sda7 > [ 3.186912] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.186963] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.187353] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 3.187357] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 3.187360] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 3.187409] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 3.187541] scsi2 : sata_nv [ 3.187607] scsi3 : sata_nv [ 3.187758] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 23 [ 3.187761] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 23 [ 3.918426] ata3: SATA link down (SStatus 0 SControl 310) [ 4.650424] ata4: SATA link down (SStatus 0 SControl 310) [ 4.650524] pata_amd 0000:00:0d.0: version 0.3.10 [ 4.650556] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 4.650654] scsi4 : pata_amd [ 4.650725] scsi5 : pata_amd [ 4.651384] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14 [ 4.651387] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15 [ 5.008308] ata6.00: ATAPI: TSSTcorpCD/DVDW TS-H652L, 0603, max UDMA/33 [ 5.008331] ata6.01: ATAPI: ASUS DVD-E616A2, CP02, max UDMA/33 [ 5.008350] ata6: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f) [ 5.008354] ata6: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f) [ 5.048252] ata6.00: configured for UDMA/33 [ 5.064249] ata6.01: configured for UDMA/33 [ 5.065703] scsi 5:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H652L 0603 PQ: 0 ANSI: 5 [ 5.073238] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.073241] Uniform CD-ROM driver Revision: 3.20 [ 5.073343] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 5.073384] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 5.073842] scsi 5:0:1:0: CD-ROM ASUS DVD-E616A2 CP02 PQ: 0 ANSI: 5 [ 5.075438] sr1: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray [ 5.075488] sr 5:0:1:0: Attached scsi CD-ROM sr1 [ 5.075522] sr 5:0:1:0: Attached scsi generic sg2 type 5 [ 5.075955] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.076343] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 5.076354] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 5.076374] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 5.076376] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 5.076428] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 5.076454] ehci_hcd 0000:00:0b.1: debug port 1 [ 5.076458] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 5.076479] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000 [ 5.084021] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 5.084086] usb usb1: configuration #1 chosen from 1 choice [ 5.084110] hub 1-0:1.0: USB hub found [ 5.084118] hub 1-0:1.0: 8 ports detected [ 5.084209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.084566] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 5.084573] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 [ 5.084582] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 5.084584] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 5.084622] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 5.084645] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfe02f000 [ 5.142042] usb usb2: configuration #1 chosen from 1 choice [ 5.142060] hub 2-0:1.0: USB hub found [ 5.142068] hub 2-0:1.0: 8 ports detected [ 5.142145] uhci_hcd: USB Universal Host Controller Interface driver [ 5.142199] usbcore: registered new interface driver libusual [ 5.142227] usbcore: registered new interface driver usbserial [ 5.142236] USB Serial support registered for generic [ 5.142246] usbcore: registered new interface driver usbserial_generic [ 5.142248] usbserial: USB Serial Driver core [ 5.142285] PNP: No PS/2 controller found. Probing ports directly. [ 5.144721] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.144727] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.149035] mice: PS/2 mouse device common for all mice [ 5.161070] rtc_cmos 00:05: RTC can wake from S4 [ 5.161098] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 5.161135] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 5.161182] device-mapper: uevent: version 1.0.3 [ 5.161266] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 5.161420] device-mapper: multipath: version 1.0.5 loaded [ 5.161422] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.161517] EISA: Probing bus 0 at eisa.0 [ 5.161525] Cannot allocate resource for EISA slot 2 [ 5.161530] Cannot allocate resource for EISA slot 4 [ 5.161541] EISA: Detected 0 cards. [ 5.161645] cpuidle: using governor ladder [ 5.161647] cpuidle: using governor menu [ 5.162050] TCP cubic registered [ 5.162126] NET: Registered protocol family 10 [ 5.162459] lo: Disabled Privacy Extensions [ 5.162706] NET: Registered protocol family 17 [ 5.162720] Bluetooth: L2CAP ver 2.11 [ 5.162721] Bluetooth: L2CAP socket layer initialized [ 5.162724] Bluetooth: SCO (Voice Link) ver 0.6 [ 5.162725] Bluetooth: SCO socket layer initialized [ 5.162773] Bluetooth: RFCOMM socket layer initialized [ 5.162779] Bluetooth: RFCOMM TTY layer initialized [ 5.162780] Bluetooth: RFCOMM ver 1.10 [ 5.162827] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00) [ 5.162891] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8 [ 5.162894] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa [ 5.162895] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc [ 5.162897] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe [ 5.162899] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 [ 5.162953] Using IPI No-Shortcut mode [ 5.163043] registered taskstats version 1 [ 5.163185] Magic number: 5:294:625 [ 5.163297] rtc_cmos 00:05: setting system clock to 2009-04-25 08:38:20 UTC (1240648700) [ 5.163300] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.163302] EDD information not available. [ 5.163622] Freeing unused kernel memory: 532k freed [ 5.163750] Write protecting the kernel text: 4128k [ 5.163793] Write protecting the kernel read-only data: 1532k [ 5.421621] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 5.422050] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 5.422062] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 [ 5.422067] forcedeth 0000:00:14.0: setting latency timer to 64 [ 5.422130] nv_probe: set workaround bit for reversed mac addr [ 5.445530] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 5.445543] ohci1394 0000:03:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 5.497310] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fddff000-fddff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 5.529068] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 5.660961] usb 1-2: configuration #1 chosen from 1 choice [ 5.661031] hub 1-2:1.0: USB hub found [ 5.661130] hub 1-2:1.0: 4 ports detected [ 5.884028] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 5.944729] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1e:8c:06:08:e4 [ 5.944733] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3 [ 6.018582] usb 1-6: configuration #1 chosen from 1 choice [ 6.022195] Initializing USB Mass Storage driver... [ 6.022327] scsi6 : SCSI emulation for USB Mass Storage devices [ 6.022408] usb-storage: device found at 5 [ 6.022412] usb-storage: waiting for device to settle before scanning [ 6.022416] usbcore: registered new interface driver usb-storage [ 6.022419] USB Mass Storage support registered. [ 6.078850] PM: Starting manual resume from disk [ 6.078853] PM: Resume from partition 8:7 [ 6.078855] PM: Checking hibernation image. [ 6.079044] PM: Resume from disk failed. [ 6.081183] EXT3-fs: INFO: recovery required on readonly filesystem. [ 6.081186] EXT3-fs: write access will be enabled during recovery. [ 6.320040] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 6.535115] usb 2-1: configuration #1 chosen from 1 choice [ 6.780168] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001916446] [ 6.840021] usb 2-3: new full speed USB device using ohci_hcd and address 3 [ 7.062105] usb 2-3: configuration #1 chosen from 1 choice [ 7.072668] usbcore: registered new interface driver hiddev [ 7.077301] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input3 [ 7.085050] generic-usb 0003:046D:C51A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-3/input0 [ 7.095127] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1/input/input4 [ 7.095329] generic-usb 0003:046D:C51A.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0b.0-3/input1 [ 7.095348] usbcore: registered new interface driver usbhid [ 7.095351] usbhid: v2.6:USB HID core driver [ 7.156638] usb 1-2.1: new low speed USB device using ehci_hcd and address 6 [ 7.271957] usb 1-2.1: configuration #1 chosen from 1 choice [ 7.276910] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1/1-2.1:1.0/input/input5 [ 7.281080] generic-usb 0003:03F0:0B0C.0003: input,hidraw2: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:0b.1-2.1/input0 [ 7.291036] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1/1-2.1:1.1/input/input6 [ 7.293911] generic-usb 0003:03F0:0B0C.0004: input,hiddev97,hidraw3: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:0b.1-2.1/input1 [ 7.380631] usb 1-2.2: new full speed USB device using ehci_hcd and address 7 [ 7.454344] kjournald starting. Commit interval 5 seconds [ 7.454357] EXT3-fs: sda6: orphan cleanup on readonly fs [ 7.454363] ext3_orphan_cleanup: deleting unreferenced inode 590819 [ 7.454390] ext3_orphan_cleanup: deleting unreferenced inode 590686 [ 7.454396] ext3_orphan_cleanup: deleting unreferenced inode 590685 [ 7.454402] ext3_orphan_cleanup: deleting unreferenced inode 590684 [ 7.454407] ext3_orphan_cleanup: deleting unreferenced inode 590683 [ 7.454411] EXT3-fs: sda6: 5 orphan inodes deleted [ 7.454413] EXT3-fs: recovery complete. [ 7.468639] usb 1-2.2: device descriptor read/64, error -32 [ 7.511582] EXT3-fs: mounted filesystem with ordered data mode. [ 7.660637] usb 1-2.2: device descriptor read/64, error -32 [ 7.853645] usb 1-2.2: new full speed USB device using ehci_hcd and address 8 [ 7.945648] usb 1-2.2: device descriptor read/64, error -32 [ 8.136645] usb 1-2.2: device descriptor read/64, error -32 [ 8.329649] usb 1-2.2: new full speed USB device using ehci_hcd and address 9 [ 8.736022] usb 1-2.2: device not accepting address 9, error -32 [ 8.825643] usb 1-2.2: new full speed USB device using ehci_hcd and address 10 [ 9.233017] usb 1-2.2: device not accepting address 10, error -32 [ 9.233151] hub 1-2:1.0: unable to enumerate USB device on port 2 [ 11.020213] usb-storage: device scan complete [ 11.021772] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 11.022271] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 11.022891] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 11.023517] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 11.024466] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 11.024521] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 11.025182] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 11.025216] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 11.025933] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 11.025966] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 11.026683] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 11.026712] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 13.038265] udev: starting version 141 [ 13.164716] ACPI: I/O resource nForce2_smbus [0x4c00-0x4c3f] conflicts with ACPI region SM00 [0x4c00-0x4c05] [ 13.164719] ACPI: Device needs an ACPI driver [ 13.164874] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 13.164908] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 13.216669] lirc_dev: IR Remote Control driver registered, major 61 [ 13.306303] [ 13.306306] lirc_mceusb2: Philips eHome USB IR Transceiver and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.44 $ [ 13.306309] lirc_mceusb2: Daniel Melander , Martin Blatter [ 13.457450] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 13.488030] usb 2-1: reset full speed USB device using ohci_hcd and address 2 [ 13.559511] cfg80211: Calling CRDA to update world regulatory domain [ 13.699041] lirc_dev: lirc_register_plugin: sample_rate: 0 [ 13.705042] lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb2:2 [ 13.705081] usbcore: registered new interface driver lirc_mceusb2 [ 13.788651] cfg80211: World regulatory domain updated: [ 13.788656] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.788659] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.788661] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.788663] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.788665] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.788667] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.407833] saa7146: register extension 'budget_ci dvb'. [ 14.408283] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 14.408295] budget_ci dvb 0000:03:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 14.408477] saa7146: found saa7146 @ mem f7ff0000 (revision 1, irq 17) (0x13c2,0x1019). [ 14.408483] saa7146 (0): dma buffer size 192512 [ 14.408485] DVB: registering new adapter (TT-Budget S2-3200 PCI) [ 14.441992] adapter has MAC addr = 00:d0:5c:64:9b:99 [ 14.442371] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:10.0/0000:03:09.0/input/input8 [ 14.541181] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 14.541187] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 14.541251] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 14.792881] stb0899_attach: Attaching STB0899 [ 14.809736] stb6100_attach: Attaching STB6100 [ 14.819238] LNBx2x attached on addr=8DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)... [ 14.819959] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 14.819971] ath5k_pci 0000:03:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 14.820042] ath5k_pci 0000:03:0a.0: registered as 'phy0' [ 14.905787] phy0: Selected rate control algorithm 'pid' [ 14.932020] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 14.949221] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa2, PHY: 0x61) [ 15.553922] lp: driver loaded but no devices found [ 15.621647] Adding 602396k swap on /dev/sda7. Priority:-1 extents:1 across:602396k [ 16.155395] EXT3 FS on sda6, internal journal [ 17.090925] type=1505 audit(1240648712.425:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2326 [ 17.135587] type=1505 audit(1240648712.469:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2330 [ 17.135720] type=1505 audit(1240648712.469:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2330 [ 17.135765] type=1505 audit(1240648712.469:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2330 [ 17.135806] type=1505 audit(1240648712.469:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2330 [ 17.265418] type=1505 audit(1240648712.601:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2335 [ 17.265607] type=1505 audit(1240648712.601:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2335 [ 17.297437] type=1505 audit(1240648712.633:9): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2339 [ 17.322959] type=1505 audit(1240648712.657:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2343 [ 23.943197] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.943200] Bluetooth: BNEP filters: protocol multicast [ 24.064894] Bridge firewalling registered [ 25.033155] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 25.033169] pci 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 25.288029] ppdev: user-space parallel port driver [ 25.550719] Linux agpgart interface v0.103 [ 25.646764] [drm] Initialized drm 1.1.0 20060810 [ 25.733545] stb6100_set_bandwidth: Bandwidth=51610000 [ 25.734794] stb6100_get_bandwidth: Bandwidth=52000000 [ 25.739497] stb6100_get_bandwidth: Bandwidth=52000000 [ 25.782775] pci 0000:02:00.0: setting latency timer to 64 [ 25.782930] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 25.824424] stb6100_set_frequency: Frequency=1944750 [ 25.825729] stb6100_get_frequency: Frequency=1944738 [ 25.837320] stb6100_get_bandwidth: Bandwidth=52000000 [ 26.380994] [drm] Setting GART location based on new memory map [ 26.381483] [drm] Loading R500 Microcode [ 26.381503] [drm] Num pipes: 1 [ 26.381509] [drm] writeback test succeeded in 1 usecs [ 29.704378] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 40.632071] eth0: no IPv6 routers present [ 88.500088] Clocksource tsc unstable (delta = -81868098 ns) [ 101.252590] stb6100_set_bandwidth: Bandwidth=61262500 [ 101.254154] stb6100_get_bandwidth: Bandwidth=62000000 [ 101.259040] stb6100_get_bandwidth: Bandwidth=62000000 [ 101.328448] stb6100_set_frequency: Frequency=1373000 [ 101.329999] stb6100_get_frequency: Frequency=1372992 [ 101.338317] stb6100_get_bandwidth: Bandwidth=62000000