[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-6-generic (buildd@lgw01-20) (gcc version 5.3.1 20160211 (Ubuntu 5.3.1-8ubuntu3) ) #21-Ubuntu SMP Tue Feb 16 20:31:49 UTC 2016 (Ubuntu 4.4.0-6.21-generic 4.4.1) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000780eafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000780eb000-0x0000000078aa4fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078aa5000-0x0000000078abefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000078abf000-0x0000000079045fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079046000-0x0000000079907fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079908000-0x0000000079908fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079909000-0x000000007994bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007994c000-0x0000000079d53fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079d54000-0x0000000079ff0fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079ff1000-0x0000000079ffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a800000-0x000000007e9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: VIT VIT P2402/B74, BIOS 504 05/13/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FFFC00000 write-back [ 0.000000] 2 base 100400000 mask FFFE00000 write-back [ 0.000000] 3 base 080000000 mask F80000000 uncachable [ 0.000000] 4 base 07C000000 mask FFC000000 uncachable [ 0.000000] 5 base 07B000000 mask FFF000000 uncachable [ 0.000000] 6 base 07A800000 mask FFF800000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 4MB, type WB [ 0.000000] reg 2, base: 4100MB, range: 2MB, type WB [ 0.000000] reg 3, base: 2GB, range: 2GB, type UC [ 0.000000] reg 4, base: 1984MB, range: 64MB, type UC [ 0.000000] reg 5, base: 1968MB, range: 16MB, type UC [ 0.000000] reg 6, base: 1960MB, range: 8MB, type UC [ 0.000000] total RAM covered: 1966M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 1960MB, range: 8MB, type UC [ 0.000000] reg 2, base: 1968MB, range: 16MB, type UC [ 0.000000] reg 3, base: 1984MB, range: 64MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4MB, type WB [ 0.000000] reg 5, base: 4100MB, range: 2MB, type WB [ 0.000000] e820: update [mem 0x7a800000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fd750-0x000fd75f] mapped at [c00fd750] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] BRK [0x01d31000, 0x01d31fff] PGTABLE [ 0.000000] BRK [0x01d32000, 0x01d32fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33d06000-0x35e7afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 PEGA ) [ 0.000000] ACPI: XSDT 0x0000000078AAA080 00006C (v01 PEGA PEGANB 00000001 AMI 00010013) [ 0.000000] ACPI: FACP 0x0000000078ABD2D0 00010C (v05 PEGA PEGANB 00000001 AMI 00010013) [ 0.000000] ACPI: DSDT 0x0000000078AAA180 01314F (v02 PEGA PEGANB 00000504 INTL 20051117) [ 0.000000] ACPI: FACS 0x0000000079043080 000040 [ 0.000000] ACPI: APIC 0x0000000078ABD3E0 000072 (v03 PEGA PEGANB 00000001 AMI 00010013) [ 0.000000] ACPI: FPDT 0x0000000078ABD458 000044 (v01 PEGA PEGANB 00000001 AMI 00010013) [ 0.000000] ACPI: ECDT 0x0000000078ABD4A0 0000C1 (v01 PEGA PEGANB 00000001 AMI. 00000005) [ 0.000000] ACPI: MCFG 0x0000000078ABD568 00003C (v01 PEGA PEGANB 00000001 MSFT 00000097) [ 0.000000] ACPI: HPET 0x0000000078ABD5A8 000038 (v01 PEGA PEGANB 00000001 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x0000000078ABD5E0 000357 (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x0000000078ABD938 000944 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x0000000078ABE280 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3210MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff] [ 0.000000] HighMem [mem 0x0000000037bfe000-0x00000001005fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000780eafff] [ 0.000000] node 0: [mem 0x0000000079908000-0x0000000079908fff] [ 0.000000] node 0: [mem 0x000000007994c000-0x0000000079d53fff] [ 0.000000] node 0: [mem 0x0000000079ff1000-0x0000000079ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001005fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001005fffff] [ 0.000000] On node 0 totalpages: 493726 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] Normal zone: 2190 pages used for memmap [ 0.000000] Normal zone: 223742 pages, LIFO batch:31 [ 0.000000] HighMem zone: 265988 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Reserving Intel graphics stolen memory at 0x7aa00000-0x7e9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] e820: [mem 0x7ea00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 19 pages/cpu @f628b000 s47116 r0 d30708 u77824 [ 0.000000] pcpu-alloc: s47116 r0 d30708 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 491496 [ 0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-4.4.0-6-generic root=UUID=9afa528b-1332-4e12-b34a-e4d699528815 ro rootflags=subvol=@ quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26 [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00037bfe:00100600) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 1900196K/1974904K available (7779K kernel code, 761K rwdata, 3112K rodata, 940K init, 800K bss, 74708K reserved, 0K cma-reserved, 1063952K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) .init : 0xc1b65000 - 0xc1c50000 ( 940 kB) .data : 0xc1799063 - 0xc1b63580 (3881 kB) .text : 0xc1000000 - 0xc1799063 (7780 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:2304 nr_irqs:456 16 [ 0.000000] CPU 0 irqstacks, hard=f3838000 soft=f383a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 2621440 bytes of page_ext [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.104 MHz processor [ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.20 BogoMIPS (lpj=9976416) [ 0.000037] pid_max: default: 32768 minimum: 301 [ 0.000041] ACPI: Core revision 20150930 [ 0.012518] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.012532] Security Framework initialized [ 0.012534] Yama: becoming mindful. [ 0.012546] AppArmor: AppArmor initialized [ 0.012576] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.012577] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.012733] Initializing cgroup subsys io [ 0.012736] Initializing cgroup subsys memory [ 0.012740] Initializing cgroup subsys devices [ 0.012743] Initializing cgroup subsys freezer [ 0.012745] Initializing cgroup subsys net_cls [ 0.012747] Initializing cgroup subsys perf_event [ 0.012748] Initializing cgroup subsys net_prio [ 0.012751] Initializing cgroup subsys hugetlb [ 0.012753] Initializing cgroup subsys pids [ 0.012772] CPU: Physical Processor ID: 0 [ 0.012773] CPU: Processor Core ID: 0 [ 0.012778] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.012779] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.012782] mce: CPU supports 7 MCE banks [ 0.012793] CPU0: Thermal monitoring enabled (TM1) [ 0.012800] process: using mwait in idle threads [ 0.012805] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.012807] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.013541] Freeing SMP alternatives memory: 28K (c1c50000 - c1c57000) [ 0.018229] ftrace: allocating 31032 entries in 61 pages [ 0.030958] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.031449] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071137] TSC deadline timer enabled [ 0.071141] smpboot: CPU0: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.071171] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.071190] ... version: 3 [ 0.071191] ... bit width: 48 [ 0.071192] ... generic registers: 4 [ 0.071193] ... value mask: 0000ffffffffffff [ 0.071194] ... max period: 0000ffffffffffff [ 0.071195] ... fixed-purpose events: 3 [ 0.071196] ... event mask: 000000070000000f [ 0.071958] CPU 1 irqstacks, hard=f301a000 soft=f301c000 [ 0.071959] x86: Booting SMP configuration: [ 0.071960] .... node #0, CPUs: #1 [ 0.072563] microcode: CPU1 microcode updated early to revision 0x1c, date = 2015-02-26 [ 0.072564] Initializing CPU#1 [ 0.074694] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.074770] CPU 2 irqstacks, hard=f30dc000 soft=f30de000 [ 0.074771] #2 [ 0.075017] Initializing CPU#2 [ 0.077184] CPU 3 irqstacks, hard=f3130000 soft=f3132000 [ 0.077187] #3 [ 0.077413] Initializing CPU#3 [ 0.079489] x86: Booted up 1 node, 4 CPUs [ 0.079492] smpboot: Total of 4 processors activated (19952.83 BogoMIPS) [ 0.082702] devtmpfs: initialized [ 0.082952] evm: security.selinux [ 0.082953] evm: security.SMACK64 [ 0.082954] evm: security.SMACK64EXEC [ 0.082955] evm: security.SMACK64TRANSMUTE [ 0.082956] evm: security.SMACK64MMAP [ 0.082957] evm: security.ima [ 0.082958] evm: security.capability [ 0.083056] PM: Registering ACPI NVS region [mem 0x78abf000-0x79045fff] (5795840 bytes) [ 0.083110] PM: Registering ACPI NVS region [mem 0x79909000-0x7994bfff] (274432 bytes) [ 0.083194] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.083266] pinctrl core: initialized pinctrl subsystem [ 0.083375] RTC time: 21:31:25, date: 08/25/17 [ 0.083474] NET: Registered protocol family 16 [ 0.083643] EISA bus registered [ 0.094552] cpuidle: using governor ladder [ 0.102662] cpuidle: using governor menu [ 0.102669] PCCT header not found. [ 0.102806] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.102808] ACPI: bus type PCI registered [ 0.102810] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.102871] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.102874] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.102875] PCI: Using MMCONFIG for extended config space [ 0.102876] PCI: Using configuration type 1 for base access [ 0.103025] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.114924] ACPI: Added _OSI(Module Device) [ 0.114926] ACPI: Added _OSI(Processor Device) [ 0.114928] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.114929] ACPI: Added _OSI(Processor Aggregator Device) [ 0.116858] ACPI : EC: EC description table is found, configuring boot EC [ 0.116874] ACPI : EC: EC started [ 0.119538] ACPI: Executed 1 blocks of module-level executable AML code [ 0.122594] ACPI: Dynamic OEM Table Load: [ 0.122600] ACPI: SSDT 0x00000000F302E000 000859 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.123253] ACPI: Dynamic OEM Table Load: [ 0.123257] ACPI: SSDT 0x00000000F3215000 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.123835] ACPI: Dynamic OEM Table Load: [ 0.123838] ACPI: SSDT 0x00000000F31E6E00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.124794] ACPI: Interpreter enabled [ 0.124801] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.124805] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.124817] ACPI: (supports S0 S3 S4 S5) [ 0.124819] ACPI: Using IOAPIC for interrupt routing [ 0.124841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.148014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.148020] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.148223] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.148341] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.148342] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.148724] PCI host bridge to bus 0000:00 [ 0.148727] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.148729] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.148731] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.148732] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.148734] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.148735] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.148737] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.148738] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.148739] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.148741] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff window] [ 0.148743] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.148750] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.148838] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.148851] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.148857] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.148861] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.149001] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.149056] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] [ 0.149163] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.149208] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.149254] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.149309] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1a000-0xf7e1a00f 64bit] [ 0.149416] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.149520] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.149568] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e18000-0xf7e183ff] [ 0.149694] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.149739] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.149789] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.149843] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit] [ 0.149971] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.150066] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.150204] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.150258] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.150303] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.150442] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.150495] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.150541] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.150685] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.150739] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.150795] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.150843] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff] [ 0.150970] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.151017] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.151061] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 0.151285] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.151337] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.151353] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.151368] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.151383] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.151399] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.151414] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e16000-0xf7e167ff] [ 0.151481] pci 0000:00:1f.2: PME# supported from D3hot [ 0.151564] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.151598] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit] [ 0.151640] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.151811] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.151926] pci 0000:02:00.0: [10ec:8723] type 00 class 0x028000 [ 0.151981] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.152025] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d03fff 64bit] [ 0.152155] pci 0000:02:00.0: supports D1 D2 [ 0.152156] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.152205] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.158626] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.158635] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.158644] pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.158752] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000 [ 0.158818] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c3ffff 64bit] [ 0.158833] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f] [ 0.158954] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166627] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.166636] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.166644] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.166696] pci_bus 0000:00: on NUMA node 0 [ 0.174758] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) [ 0.174807] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12) [ 0.174854] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 12) [ 0.174899] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12) [ 0.174944] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.174990] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.175036] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12) [ 0.175081] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12) [ 0.175221] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.175329] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62 [ 0.175432] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.175434] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.175437] vgaarb: loaded [ 0.175438] vgaarb: bridge control possible 0000:00:02.0 [ 0.175680] SCSI subsystem initialized [ 0.175717] libata version 3.00 loaded. [ 0.175743] ACPI: bus type USB registered [ 0.175758] usbcore: registered new interface driver usbfs [ 0.175766] usbcore: registered new interface driver hub [ 0.175782] usbcore: registered new device driver usb [ 0.175917] PCI: Using ACPI for IRQ routing [ 0.179476] PCI: pci_cache_line_size set to 64 bytes [ 0.179545] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.179547] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.179548] e820: reserve RAM buffer [mem 0x780eb000-0x7bffffff] [ 0.179551] e820: reserve RAM buffer [mem 0x79909000-0x7bffffff] [ 0.179552] e820: reserve RAM buffer [mem 0x79d54000-0x7bffffff] [ 0.179554] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.179555] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff] [ 0.179668] NetLabel: Initializing [ 0.179669] NetLabel: domain hash size = 128 [ 0.179670] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.179681] NetLabel: unlabeled traffic allowed by default [ 0.179806] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.179810] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.181842] clocksource: Switched to clocksource hpet [ 0.188655] AppArmor: AppArmor Filesystem Enabled [ 0.188722] pnp: PnP ACPI init [ 0.188860] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.188862] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.188864] system 00:00: [io 0xffff] has been reserved [ 0.188865] system 00:00: [io 0xffff] has been reserved [ 0.188867] system 00:00: [io 0x0400-0x0453] could not be reserved [ 0.188869] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.188871] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.188872] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.188876] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.188903] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.188951] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.188953] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.188999] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.189001] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.189069] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.189071] system 00:04: [io 0x0400-0x047f] could not be reserved [ 0.189073] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.189075] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.189133] system 00:05: [io 0x025d] has been reserved [ 0.189135] system 00:05: [io 0x025c] has been reserved [ 0.189138] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.189139] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.189141] system 00:05: [mem 0xfec10000-0xfec17fff] has been reserved [ 0.189143] system 00:05: [mem 0xfec18000-0xfec1ffff] has been reserved [ 0.189144] system 00:05: [mem 0xfec20000-0xfec27fff] has been reserved [ 0.189146] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.189149] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.189198] pnp 00:06: Plug and Play ACPI device, IDs SYN1d1c SYN1d00 SYN0002 PNP0f13 (active) [ 0.189234] pnp 00:07: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active) [ 0.189265] system 00:08: [io 0x0240-0x0259] has been reserved [ 0.189268] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.189445] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.189447] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.189449] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.189450] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.189452] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.189454] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.189456] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.189458] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.189459] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 0.189461] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.189463] system 00:09: [mem 0x7ea00000-0x7ea00fff] has been reserved [ 0.189465] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.194068] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.194071] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.194073] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.194100] pnp: PnP ACPI: found 11 devices [ 0.194105] PnPBIOS: Disabled by ACPI PNP [ 0.231205] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.231254] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.231275] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.231279] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.231287] pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.231301] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.231305] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.231312] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.231326] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.231328] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.231329] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.231331] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.231333] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.231334] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.231336] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.231337] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.231339] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.231340] pci_bus 0000:00: resource 13 [mem 0x7ea00000-0xfeafffff window] [ 0.231342] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.231344] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.231345] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.231347] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.231374] NET: Registered protocol family 2 [ 0.231515] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.231528] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.231544] TCP: Hash tables configured (established 8192 bind 8192) [ 0.231556] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.231560] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.231591] NET: Registered protocol family 1 [ 0.231603] pci 0000:00:02.0: Video device with shadowed ROM [ 0.269908] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.269924] PCI: CLS 64 bytes, default 64 [ 0.269969] Trying to unpack rootfs image as initramfs... [ 0.820132] Freeing initrd memory: 34260K (f3d06000 - f5e7b000) [ 0.820261] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.820263] hw unit of domain pp0-core 2^-16 Joules [ 0.820264] hw unit of domain package 2^-16 Joules [ 0.820265] hw unit of domain pp1-gpu 2^-16 Joules [ 0.820405] Scanning for low memory corruption every 60 seconds [ 0.820772] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.820803] audit: initializing netlink subsys (disabled) [ 0.820818] audit: type=2000 audit(1503696685.812:1): initialized [ 0.821141] Initialise system trusted keyring [ 0.821262] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.822625] zbud: loaded [ 0.822729] VFS: Disk quotas dquot_6.6.0 [ 0.822760] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.823171] fuse init (API version 7.23) [ 0.823310] Key type big_key registered [ 0.823832] Key type asymmetric registered [ 0.823836] Asymmetric key parser 'x509' registered [ 0.823852] bounce: pool size: 64 pages [ 0.823883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.823926] io scheduler noop registered [ 0.823930] io scheduler deadline registered (default) [ 0.823958] io scheduler cfq registered [ 0.824476] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.824482] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.824509] vesafb: mode is 1360x768x32, linelength=5440, pages=0 [ 0.824510] vesafb: scrolling: redraw [ 0.824511] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.824519] vesafb: framebuffer at 0xe0000000, mapped to 0xf8600000, using 4096k, total 4096k [ 0.824612] Console: switching to colour frame buffer device 170x48 [ 0.824640] fb0: VESA VGA frame buffer device [ 0.824654] intel_idle: MWAIT substates: 0x21120 [ 0.824655] intel_idle: v0.4 model 0x3A [ 0.824656] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.824895] ACPI: AC Adapter [AC0] (on-line) [ 0.824954] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.829966] ACPI: Lid Switch [LID] [ 0.830004] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.830007] ACPI: Sleep Button [SLPB] [ 0.830041] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.830043] ACPI: Power Button [PWRF] [ 0.830696] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.830698] ACPI: Thermal Zone [THRM] (52 C) [ 0.830728] GHES: HEST is not enabled! [ 0.830838] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.830879] isapnp: Scanning for PnP cards... [ 0.832872] Linux agpgart interface v0.103 [ 0.836006] brd: module loaded [ 0.837300] loop: module loaded [ 0.837505] libphy: Fixed MDIO Bus: probed [ 0.837509] tun: Universal TUN/TAP device driver, 1.6 [ 0.837510] tun: (C) 1999-2004 Max Krasnyansky [ 0.837558] PPP generic driver version 2.4.2 [ 0.837628] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.837633] ehci-pci: EHCI PCI platform driver [ 0.837739] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.837745] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.837763] ehci-pci 0000:00:1a.0: debug port 2 [ 0.841660] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.841670] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e18000 [ 0.849948] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.849994] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.849996] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.849998] usb usb1: Product: EHCI Host Controller [ 0.849999] usb usb1: Manufacturer: Linux 4.4.0-6-generic ehci_hcd [ 0.850000] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.850118] hub 1-0:1.0: USB hub found [ 0.850123] hub 1-0:1.0: 2 ports detected [ 0.850295] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.850300] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.850316] ehci-pci 0000:00:1d.0: debug port 2 [ 0.854234] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.854243] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e17000 [ 0.865958] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.866001] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.866003] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.866004] usb usb2: Product: EHCI Host Controller [ 0.866006] usb usb2: Manufacturer: Linux 4.4.0-6-generic ehci_hcd [ 0.866007] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.866125] hub 2-0:1.0: USB hub found [ 0.866130] hub 2-0:1.0: 2 ports detected [ 0.866228] ehci-platform: EHCI generic platform driver [ 0.866240] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.866244] ohci-pci: OHCI PCI platform driver [ 0.866256] ohci-platform: OHCI generic platform driver [ 0.866265] uhci_hcd: USB Universal Host Controller Interface driver [ 0.866370] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.866375] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.867511] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 0.867519] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.867673] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.867675] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.867676] usb usb3: Product: xHCI Host Controller [ 0.867678] usb usb3: Manufacturer: Linux 4.4.0-6-generic xhci-hcd [ 0.867679] usb usb3: SerialNumber: 0000:00:14.0 [ 0.867787] hub 3-0:1.0: USB hub found [ 0.867800] hub 3-0:1.0: 4 ports detected [ 0.868115] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.868118] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.868149] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.868151] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.868152] usb usb4: Product: xHCI Host Controller [ 0.868154] usb usb4: Manufacturer: Linux 4.4.0-6-generic xhci-hcd [ 0.868155] usb usb4: SerialNumber: 0000:00:14.0 [ 0.868262] hub 4-0:1.0: USB hub found [ 0.868274] hub 4-0:1.0: 4 ports detected [ 0.868637] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.870592] i8042: Detected active multiplexing controller, rev 1.1 [ 0.872641] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.872646] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.872677] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.872706] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.872730] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.872864] mousedev: PS/2 mouse device common for all mice [ 0.873061] rtc_cmos 00:01: RTC can wake from S4 [ 0.873231] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.873266] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.873274] i2c /dev entries driver [ 0.873320] device-mapper: uevent: version 1.0.3 [ 0.873390] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.873410] platform eisa.0: Probing EISA bus 0 [ 0.873412] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.873414] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.873416] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.873417] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.873418] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.873420] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.873421] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.873423] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.873424] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.873425] platform eisa.0: EISA: Detected 0 cards [ 0.873439] cpufreq-nforce2: No nForce2 chipset. [ 0.873444] Intel P-state driver initializing. [ 0.873602] ledtrig-cpu: registered to indicate activity on CPUs [ 0.874126] NET: Registered protocol family 10 [ 0.874542] NET: Registered protocol family 17 [ 0.874561] Key type dns_resolver registered [ 0.875037] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1c [ 0.875049] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1c [ 0.875066] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1c [ 0.875085] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1c [ 0.875158] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.875185] Using IPI No-Shortcut mode [ 0.875476] registered taskstats version 1 [ 0.875518] Loading compiled-in X.509 certificates [ 0.878569] ACPI: Battery Slot [BAT0] (battery present) [ 0.879828] Loaded X.509 cert 'Build time autogenerated kernel key: 5caf75d355d4c72dc9a4eb4ff388bd3351c8e577' [ 0.879848] zswap: loaded using pool lzo/zbud [ 0.881877] Key type trusted registered [ 0.885377] Key type encrypted registered [ 0.885385] AppArmor: AppArmor sha1 policy hashing enabled [ 0.885389] ima: No TPM chip found, activating TPM-bypass! [ 0.885405] evm: HMAC attrs: 0x1 [ 0.885743] Magic number: 13:597:551 [ 0.885760] tty ttyS27: hash matches [ 0.885767] clockevents clockevent2: hash matches [ 0.885780] acpi PNP0C0F:02: hash matches [ 0.885861] rtc_cmos 00:01: setting system clock to 2017-08-25 21:31:26 UTC (1503696686) [ 0.885959] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.885960] EDD information not available. [ 0.886051] PM: Hibernation image not present or could not be loaded. [ 0.890167] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.142823] isapnp: No Plug & Play device found [ 1.143115] Freeing unused kernel memory: 940K (c1b65000 - c1c50000) [ 1.143223] Write protecting the kernel text: 7784k [ 1.143259] Write protecting the kernel read-only data: 3116k [ 1.143260] NX-protecting the kernel data: 6552k [ 1.153673] random: systemd-udevd urandom read with 0 bits of entropy available [ 1.161979] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.177990] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.178007] usb 3-2: new low-speed USB device number 2 using xhci_hcd [ 1.188866] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.189384] wmi: Mapper loaded [ 1.215858] ahci 0000:00:1f.2: version 3.0 [ 1.216065] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.216069] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.216783] [drm] Initialized drm 1.1.0 20060810 [ 1.221765] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [54:be:f7:43:ac:a4] [ 1.235902] scsi host0: ahci [ 1.236037] scsi host1: ahci [ 1.236313] scsi host2: ahci [ 1.236450] scsi host3: ahci [ 1.238011] scsi host4: ahci [ 1.240776] scsi host5: ahci [ 1.240855] ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 25 [ 1.240857] ata2: DUMMY [ 1.240861] ata3: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16200 irq 25 [ 1.240863] ata4: DUMMY [ 1.240865] ata5: DUMMY [ 1.240866] ata6: DUMMY [ 1.279707] [drm] Memory usable by graphics device = 2048M [ 1.279712] checking generic (e0000000 400000) vs hw (e0000000 10000000) [ 1.279713] fb: switching to inteldrmfb from VESA VGA [ 1.279738] Console: switching to colour dummy device 80x25 [ 1.279811] [drm] Replacing VGA console driver [ 1.286096] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.286098] [drm] Driver supports precise vblank timestamp query. [ 1.286206] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.294387] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.294391] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.294681] hub 1-1:1.0: USB hub found [ 1.294756] hub 1-1:1.0: 6 ports detected [ 1.297845] alx 0000:03:00.0 enp3s0: renamed from eth0 [ 1.309107] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 1.310383] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.310386] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.310683] hub 2-1:1.0: USB hub found [ 1.310699] usb 3-2: New USB device found, idVendor=04f3, idProduct=0103 [ 1.310702] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.310757] hub 2-1:1.0: 6 ports detected [ 1.310803] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.310809] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.315050] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10 [ 1.315718] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 1.318929] hidraw: raw HID events driver (C) Jiri Kosina [ 1.329939] usbcore: registered new interface driver usbhid [ 1.329942] usbhid: USB HID core driver [ 1.333494] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:04F3:0103.0001/input/input11 [ 1.333610] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-2/input0 [ 1.334973] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:04F3:0103.0002/input/input12 [ 1.335084] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:14.0-2/input1 [ 1.374828] fbcon: inteldrmfb (fb0) is primary device [ 1.374894] Console: switching to colour frame buffer device 170x48 [ 1.374926] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.558091] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.558135] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.559768] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20150930/dsopcode-236) [ 1.559774] ACPI Error: Method parse/execution failed [\GTFB] (Node f38a2e40), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [ 1.559780] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node f38a2f00), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [ 1.559786] ata1.00: _GTF evaluation failed (AE 0x300a) [ 1.560217] ata1.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133 [ 1.560224] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.562301] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20150930/dsopcode-236) [ 1.562308] ACPI Error: Method parse/execution failed [\GTFB] (Node f38a2e40), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [ 1.562316] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node f38a2f00), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [ 1.562325] ata1.00: _GTF evaluation failed (AE 0x300a) [ 1.562348] ata3.00: ATAPI: Slimtype DVD A DS8A9SH, EC26, max UDMA/100 [ 1.562749] ata1.00: configured for UDMA/133 [ 1.563066] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 1A01 PQ: 0 ANSI: 5 [ 1.563431] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.563435] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.563456] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.563510] sd 0:0:0:0: [sda] Write Protect is off [ 1.563514] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.563568] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.566008] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 1.568281] ata3.00: configured for UDMA/100 [ 1.576487] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A9SH EC26 PQ: 0 ANSI: 5 [ 1.603155] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.603158] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.603414] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.603607] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.632816] sda: sda1 sda2 sda3 sda4 [ 1.633522] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.745528] usb 1-1.1: New USB device found, idVendor=0c45, idProduct=6457 [ 1.745531] usb 1-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.745533] usb 1-1.1: Product: USB 2.0 Camera [ 1.745534] usb 1-1.1: Manufacturer: 0420-00HS000D4SBD1 [ 1.818072] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 1.818100] tsc: Refined TSC clocksource calibration: 2494.334 MHz [ 1.818104] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45126d86, max_idle_ns: 440795256522 ns [ 1.890078] usb 1-1.2: device descriptor read/64, error -32 [ 1.928207] psmouse serio2: synaptics: queried max coordinates: x [..5634], y [..4598] [ 1.983439] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 706145 [ 2.018881] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9 [ 2.088342] usb 1-1.2: New USB device found, idVendor=062a, idProduct=4102 [ 2.088349] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.088354] usb 1-1.2: Product: 2.4G Wireless Mouse [ 2.088357] usb 1-1.2: Manufacturer: MOSART Semi. [ 2.090265] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:062A:4102.0003/input/input15 [ 2.090646] hid-generic 0003:062A:4102.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.162088] usb 1-1.4: new full-speed USB device number 5 using ehci-pci [ 2.256606] usb 1-1.4: New USB device found, idVendor=13d3, idProduct=3394 [ 2.256612] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.256616] usb 1-1.4: Product: RT Bluetooth Radio [ 2.256620] usb 1-1.4: Manufacturer: Realtek [ 2.256622] usb 1-1.4: SerialNumber: 00e04c000001 [ 2.614094] raid6: mmxx1 gen() 4256 MB/s [ 2.682098] raid6: mmxx2 gen() 4529 MB/s [ 2.750104] raid6: sse1x1 gen() 3503 MB/s [ 2.818101] raid6: sse1x2 gen() 4280 MB/s [ 2.886107] raid6: sse2x1 gen() 7061 MB/s [ 2.954116] raid6: sse2x1 xor() 5487 MB/s [ 3.022122] raid6: sse2x2 gen() 8917 MB/s [ 3.090126] raid6: sse2x2 xor() 6167 MB/s [ 3.090127] raid6: using algorithm sse2x2 gen() 8917 MB/s [ 3.090128] raid6: .... xor() 6167 MB/s, rmw enabled [ 3.090129] raid6: using ssse3x1 recovery algorithm [ 3.090206] clocksource: Switched to clocksource tsc [ 3.093544] xor: automatically using best checksumming function: [ 3.130114] avx : 18699.000 MB/sec [ 3.158412] Btrfs loaded [ 3.520424] BTRFS: device fsid 9afa528b-1332-4e12-b34a-e4d699528815 devid 1 transid 4380 /dev/sda4 [ 3.569932] BTRFS info (device sda4): disk space caching is enabled [ 3.569936] BTRFS: has skinny extents [ 4.156817] random: nonblocking pool is initialized [ 4.693540] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 4.777292] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 4.777466] systemd[1]: Detected architecture x86. [ 4.799704] systemd[1]: Set hostname to . [ 7.055803] systemd[1]: Listening on udev Control Socket. [ 7.055881] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.055909] systemd[1]: Listening on udev Kernel Socket. [ 7.055985] systemd[1]: Listening on Journal Audit Socket. [ 7.055998] systemd[1]: Reached target User and Group Name Lookups. [ 7.056030] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.056074] systemd[1]: Listening on Journal Socket. [ 7.056104] systemd[1]: Listening on Syslog Socket. [ 7.056232] systemd[1]: Created slice System Slice. [ 7.070683] systemd[1]: Mounting Debug File System... [ 7.071288] systemd[1]: Starting Uncomplicated firewall... [ 7.110803] systemd[1]: Starting Load Kernel Modules... [ 7.111106] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.111952] systemd[1]: Mounting Huge Pages File System... [ 7.226786] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 7.227417] systemd[1]: Started Read required files in advance. [ 7.228312] systemd[1]: Starting Braille Device Support... [ 7.228340] systemd[1]: Reached target Remote File Systems (Pre). [ 7.228358] systemd[1]: Reached target Remote File Systems. [ 7.228371] systemd[1]: Reached target Encrypted Volumes. [ 7.228497] systemd[1]: Created slice system-getty.slice. [ 7.230683] systemd[1]: Listening on Process Core Dump Socket. [ 7.230895] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.354008] lp: driver loaded but no devices found [ 7.355185] systemd[1]: Created slice User and Session Slice. [ 7.355241] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.358989] ppdev: user-space parallel port driver [ 7.370714] systemd[1]: Starting Journal Service... [ 7.371399] systemd[1]: Mounting POSIX Message Queue File System... [ 7.371478] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.371510] systemd[1]: Reached target Slices. [ 7.373127] systemd[1]: Started Load Kernel Modules. [ 7.373342] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 7.418701] systemd[1]: Starting Create Static Device Nodes in /dev... [ 7.419434] systemd[1]: Starting Apply Kernel Variables... [ 7.420101] systemd[1]: Mounting FUSE Control File System... [ 7.423272] systemd[1]: Started Uncomplicated firewall. [ 7.649973] systemd[1]: Mounted Debug File System. [ 7.650019] systemd[1]: Mounted FUSE Control File System. [ 7.650049] systemd[1]: Mounted Huge Pages File System. [ 7.650070] systemd[1]: Mounted POSIX Message Queue File System. [ 7.694133] systemd[1]: Started Apply Kernel Variables. [ 7.947270] systemd[1]: Started Braille Device Support. [ 7.980788] systemd[1]: Started Journal Service. [ 9.264909] BTRFS info (device sda4): disk space caching is enabled [ 9.408050] systemd-journald[289]: Received request to flush runtime journal from PID 1 [ 9.670483] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.917642] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20150930/utaddress-254) [ 9.917649] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIX) (20150930/utaddress-254) [ 9.917652] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254) [ 9.917655] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB_.PCI0.VGA_.TCOI) (20150930/utaddress-254) [ 9.917659] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.917663] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20150930/utaddress-254) [ 9.917666] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 9.917668] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.917670] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20150930/utaddress-254) [ 9.917672] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 9.917675] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.917676] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20150930/utaddress-254) [ 9.917678] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 9.917681] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.917682] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 10.496237] Bluetooth: Core ver 2.21 [ 10.496251] NET: Registered protocol family 31 [ 10.496252] Bluetooth: HCI device and connection manager initialized [ 10.496256] Bluetooth: HCI socket layer initialized [ 10.496258] Bluetooth: L2CAP socket layer initialized [ 10.496262] Bluetooth: SCO socket layer initialized [ 10.576673] input: Toshiba WMI hotkeys as /devices/virtual/input/input16 [ 10.576723] toshiba_wmi: Toshiba WMI Hotkey Driver [ 10.600264] media: Linux media interface: v0.10 [ 10.629227] intel_rapl: Found RAPL domain package [ 10.629232] intel_rapl: Found RAPL domain core [ 10.629234] intel_rapl: Found RAPL domain uncore [ 10.629240] intel_rapl: RAPL package 0 domain package locked by BIOS [ 10.643892] usbcore: registered new interface driver btusb [ 10.646505] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1802: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker [ 10.646508] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.646510] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x25/0x0/0x0/0x0/0x0) [ 10.646512] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0 [ 10.646513] snd_hda_codec_via hdaudioC0D0: dig-out=0x2d/0x0 [ 10.646514] snd_hda_codec_via hdaudioC0D0: inputs: [ 10.646517] snd_hda_codec_via hdaudioC0D0: Mic=0x2b [ 10.646520] snd_hda_codec_via hdaudioC0D0: Internal Mic=0x29 [ 10.646819] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=224c lmp_ver=06 lmp_subver=7afe [ 10.646822] Bluetooth: rtl: assuming no firmware upload needed. [ 10.705349] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin [ 10.814019] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 10.814245] rtlwifi: rtlwifi: wireless switch is on [ 10.815559] rtl8723ae 0000:02:00.0 wlp2s0: renamed from wlan0 [ 11.028961] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 11.029041] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 11.029114] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 11.057530] Linux video capture interface: v2.00 [ 11.205782] cfg80211: World regulatory domain updated: [ 11.205786] cfg80211: DFS Master region: unset [ 11.205787] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.205789] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.205791] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.205792] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.205794] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 11.205796] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.205798] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.205799] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.205801] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 11.475802] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6457) [ 11.495236] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input20 [ 11.495681] usbcore: registered new interface driver uvcvideo [ 11.495683] USB Video Class driver (1.1.1) [ 11.649720] Adding 4294652k swap on /dev/sda3. Priority:-1 extents:1 across:4294652k FS [ 13.103696] BTRFS error (device sda4): could not find root 8 [ 13.103708] BTRFS error (device sda4): could not find root 8 [ 13.945784] audit: type=1400 audit(1503696699.552:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=675 comm="apparmor_parser" [ 13.945793] audit: type=1400 audit(1503696699.552:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=675 comm="apparmor_parser" [ 13.975985] audit: type=1400 audit(1503696699.584:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=675 comm="apparmor_parser" [ 13.975995] audit: type=1400 audit(1503696699.584:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=675 comm="apparmor_parser" [ 13.976001] audit: type=1400 audit(1503696699.584:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=675 comm="apparmor_parser" [ 13.976007] audit: type=1400 audit(1503696699.584:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=675 comm="apparmor_parser" [ 14.094387] audit: type=1400 audit(1503696699.700:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=675 comm="apparmor_parser" [ 14.094395] audit: type=1400 audit(1503696699.700:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=675 comm="apparmor_parser" [ 14.094400] audit: type=1400 audit(1503696699.700:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=675 comm="apparmor_parser" [ 14.094405] audit: type=1400 audit(1503696699.700:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=675 comm="apparmor_parser" [ 14.376372] cgroup: new mount options do not match the existing superblock, will be ignored [ 15.701032] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.701034] Bluetooth: BNEP filters: protocol multicast [ 15.701038] Bluetooth: BNEP socket layer initialized [ 17.176147] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 17.180013] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 17.185159] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 17.574140] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 17.913330] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 22.587973] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 22.591310] vboxdrv: Found 4 processor cores [ 22.608278] vboxdrv: TSC mode is Invariant, tentative frequency 2494305170 Hz [ 22.608283] vboxdrv: Successfully loaded version 5.0.14_Ubuntu (interface 0x00240000) [ 22.640981] VBoxNetFlt: Successfully started. [ 22.667051] VBoxNetAdp: Successfully started. [ 22.929409] VBoxPciLinuxInit [ 22.956401] vboxpci: IOMMU not found (not registered) [ 23.146298] wlp2s0: authenticate with e8:de:27:58:b1:ce [ 23.529085] wlp2s0: send auth to e8:de:27:58:b1:ce (try 1/3) [ 23.532140] wlp2s0: authenticated [ 23.536015] wlp2s0: associate with e8:de:27:58:b1:ce (try 1/3) [ 23.540075] wlp2s0: RX AssocResp from e8:de:27:58:b1:ce (capab=0x31 status=0 aid=4) [ 23.540325] wlp2s0: associated [ 23.540345] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 28.085894] Bluetooth: RFCOMM TTY layer initialized [ 28.085905] Bluetooth: RFCOMM socket layer initialized [ 28.085909] Bluetooth: RFCOMM ver 1.11 [ 28.095544] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder B [ 28.804390] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder B [ 28.804412] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder B FIFO underrun [ 160.703148] wlp2s0: deauthenticating from e8:de:27:58:b1:ce by local choice (Reason: 3=DEAUTH_LEAVING) [ 160.731372] cfg80211: World regulatory domain updated: [ 160.731386] cfg80211: DFS Master region: unset [ 160.731389] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 160.731394] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 160.731398] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 160.731401] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 160.731405] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 160.731409] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 160.731412] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 160.731414] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 160.731417] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 161.673906] wlp2s0: authenticate with e8:de:27:58:b1:ce [ 161.705932] wlp2s0: send auth to e8:de:27:58:b1:ce (try 1/3) [ 161.708199] wlp2s0: authenticated [ 161.712771] wlp2s0: associate with e8:de:27:58:b1:ce (try 1/3) [ 161.719477] wlp2s0: RX AssocResp from e8:de:27:58:b1:ce (capab=0x31 status=0 aid=4) [ 161.719773] wlp2s0: associated [ 588.027822] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder B [ 588.027847] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder B FIFO underrun [ 1384.244345] wlp2s0: deauthenticating from e8:de:27:58:b1:ce by local choice (Reason: 3=DEAUTH_LEAVING) [ 1384.267883] cfg80211: World regulatory domain updated: [ 1384.267888] cfg80211: DFS Master region: unset [ 1384.267891] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1384.267895] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1384.267898] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1384.267902] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1384.267905] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1384.267909] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1384.267912] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1384.267915] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1384.267918] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1384.649049] PM: Syncing filesystems ... done. [ 1384.928329] PM: Preparing system for sleep (mem) [ 1384.928465] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 1384.930204] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1384.931325] PM: Suspending system (mem) [ 1384.931337] Suspending console(s) (use no_console_suspend to debug) [ 1384.931973] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1384.932293] sd 0:0:0:0: [sda] Stopping disk [ 1385.589652] PM: suspend of devices complete after 658.134 msecs [ 1385.605584] PM: late suspend of devices complete after 15.923 msecs [ 1385.606999] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 1385.607146] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 1385.607315] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 1385.621770] PM: noirq suspend of devices complete after 16.181 msecs [ 1385.622050] ACPI: Preparing to enter system sleep state S3 [ 1385.623283] ACPI : EC: EC stopped [ 1385.623284] PM: Saving platform NVS memory [ 1385.623294] Disabling non-boot CPUs ... [ 1385.623571] Broke affinity for irq 26 [ 1385.624602] smpboot: CPU 1 is now offline [ 1385.634044] Broke affinity for irq 16 [ 1385.634048] Broke affinity for irq 17 [ 1385.634052] Broke affinity for irq 23 [ 1385.634054] Broke affinity for irq 24 [ 1385.634062] Broke affinity for irq 26 [ 1385.635086] smpboot: CPU 2 is now offline [ 1385.645929] Broke affinity for irq 1 [ 1385.645938] Broke affinity for irq 9 [ 1385.645942] Broke affinity for irq 12 [ 1385.645946] Broke affinity for irq 16 [ 1385.645950] Broke affinity for irq 17 [ 1385.645954] Broke affinity for irq 23 [ 1385.645955] Broke affinity for irq 24 [ 1385.645956] Broke affinity for irq 25 [ 1385.645957] Broke affinity for irq 26 [ 1385.646970] smpboot: CPU 3 is now offline [ 1385.658938] ACPI: Low-level resume complete [ 1385.659000] ACPI : EC: EC started [ 1385.659001] PM: Restoring platform NVS memory [ 1385.660024] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26 [ 1385.660044] Enabling non-boot CPUs ... [ 1385.679220] x86: Booting SMP configuration: [ 1385.679221] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1385.679856] microcode: CPU1 microcode updated early to revision 0x1c, date = 2015-02-26 [ 1385.679857] Initializing CPU#1 [ 1385.682123] cache: parent cpu1 should not be sleeping [ 1385.682270] CPU1 is up [ 1385.703265] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 1385.703545] Initializing CPU#2 [ 1385.705801] cache: parent cpu2 should not be sleeping [ 1385.705914] CPU2 is up [ 1385.723325] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1385.723602] Initializing CPU#3 [ 1385.725891] cache: parent cpu3 should not be sleeping [ 1385.726003] CPU3 is up [ 1385.729040] ACPI: Waking up from system sleep state S3 [ 1386.191392] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1386.191786] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 1386.191896] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 1386.192056] PM: noirq resume of devices complete after 16.794 msecs [ 1386.192425] PM: early resume of devices complete after 0.348 msecs [ 1386.192943] usb usb1: root hub lost power or was reset [ 1386.193416] rtlwifi: rtlwifi: wireless switch is on [ 1386.196834] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1386.197215] sd 0:0:0:0: [sda] Starting disk [ 1386.207326] rtc_cmos 00:01: System wakeup disabled by ACPI [ 1386.523172] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1386.525583] ata3.00: configured for UDMA/100 [ 1386.527158] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 1386.866311] psmouse serio2: synaptics: queried max coordinates: x [..5634], y [..4598] [ 1386.939193] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [ 1387.103204] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [ 1387.267239] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [ 1387.361973] PM: resume of devices complete after 1169.435 msecs [ 1387.362650] PM: Finishing wakeup. [ 1387.362653] Restarting tasks ... [ 1387.364264] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200 [ 1387.364271] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin [ 1387.379223] done. [ 1387.410315] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder B [ 1387.410342] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder B FIFO underrun [ 1387.426652] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 1387.427119] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 1387.428486] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 1387.812041] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 1387.878330] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 1388.854646] wlp2s0: authenticate with e8:de:27:58:b1:ce [ 1388.871230] wlp2s0: send auth to e8:de:27:58:b1:ce (try 1/3) [ 1388.873419] wlp2s0: authenticated [ 1388.875350] wlp2s0: associate with e8:de:27:58:b1:ce (try 1/3) [ 1388.879693] wlp2s0: RX AssocResp from e8:de:27:58:b1:ce (capab=0x31 status=0 aid=4) [ 1388.879938] wlp2s0: associated [ 1388.879948] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 1389.039433] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1389.041269] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20150930/dsopcode-236) [ 1389.041279] ACPI Error: Method parse/execution failed [\GTFB] (Node f38a2e40), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [ 1389.041288] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node f38a2f00), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [ 1389.041297] ata1.00: _GTF evaluation failed (AE 0x300a) [ 1389.205001] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20150930/dsopcode-236) [ 1389.205013] ACPI Error: Method parse/execution failed [\GTFB] (Node f38a2e40), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [ 1389.205025] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node f38a2f00), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [ 1389.205037] ata1.00: _GTF evaluation failed (AE 0x300a) [ 1389.205373] ata1.00: configured for UDMA/133 [ 7824.426094] wlp2s0: deauthenticating from e8:de:27:58:b1:ce by local choice (Reason: 3=DEAUTH_LEAVING) [ 7824.449096] cfg80211: World regulatory domain updated: [ 7824.449102] cfg80211: DFS Master region: unset [ 7824.449104] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7824.449109] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7824.449113] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7824.449116] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7824.449120] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7824.449124] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7824.449128] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7824.449131] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7824.449134] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7825.385008] wlp2s0: authenticate with e8:de:27:58:b1:ce [ 7825.416458] wlp2s0: send auth to e8:de:27:58:b1:ce (try 1/3) [ 7825.420699] wlp2s0: authenticated [ 7825.423146] wlp2s0: associate with e8:de:27:58:b1:ce (try 1/3) [ 7825.427227] wlp2s0: RX AssocResp from e8:de:27:58:b1:ce (capab=0x31 status=0 aid=3) [ 7825.427519] wlp2s0: associated [17413.495689] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder B [17413.495743] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder B FIFO underrun [17449.633357] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder B [17449.633407] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder B FIFO underrun [20243.073408] perf interrupt took too long (2579 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [21808.704323] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A [42938.232159] wlp2s0: Connection to AP e8:de:27:58:b1:ce lost [42941.491843] cfg80211: World regulatory domain updated: [42941.491848] cfg80211: DFS Master region: unset [42941.491850] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [42941.491854] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [42941.491857] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [42941.491859] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [42941.491863] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [42941.491866] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [42941.491868] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [42941.491870] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [42941.491873] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [42942.055923] wlp2s0: authenticate with e8:de:27:58:b1:ce [42942.073402] wlp2s0: send auth to e8:de:27:58:b1:ce (try 1/3) [42942.075833] wlp2s0: authenticated [42942.076467] wlp2s0: associate with e8:de:27:58:b1:ce (try 1/3) [42942.082123] wlp2s0: RX AssocResp from e8:de:27:58:b1:ce (capab=0x431 status=0 aid=3) [42942.082745] wlp2s0: associated [44965.208083] usb 1-1.2: USB disconnect, device number 4 [45333.469410] wlp2s0: deauthenticating from e8:de:27:58:b1:ce by local choice (Reason: 3=DEAUTH_LEAVING) [45333.497727] cfg80211: World regulatory domain updated: [45333.497732] cfg80211: DFS Master region: unset [45333.497735] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [45333.497739] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [45333.497742] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [45333.497744] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [45333.497747] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [45333.497751] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [45333.497753] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [45333.497756] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [45333.497759] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [45336.398650] PM: Syncing filesystems ... done. [45337.578092] PM: Preparing system for sleep (mem) [45337.641444] Freezing user space processes ... (elapsed 0.343 seconds) done. [45337.984714] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [45337.986000] PM: Suspending system (mem) [45337.986019] Suspending console(s) (use no_console_suspend to debug) [45337.986364] sd 0:0:0:0: [sda] Synchronizing SCSI cache [45337.992272] sd 0:0:0:0: [sda] Stopping disk [45338.648153] PM: suspend of devices complete after 661.884 msecs [45338.664114] PM: late suspend of devices complete after 15.950 msecs [45338.665686] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [45338.665947] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [45338.666165] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [45338.680275] PM: noirq suspend of devices complete after 16.154 msecs [45338.680716] ACPI: Preparing to enter system sleep state S3 [45338.682426] ACPI : EC: EC stopped [45338.682427] PM: Saving platform NVS memory [45338.682442] Disabling non-boot CPUs ... [45338.682843] Broke affinity for irq 26 [45338.683883] smpboot: CPU 1 is now offline [45338.700933] Broke affinity for irq 16 [45338.700937] Broke affinity for irq 17 [45338.700942] Broke affinity for irq 23 [45338.700945] Broke affinity for irq 24 [45338.700947] Broke affinity for irq 26 [45338.701978] smpboot: CPU 2 is now offline [45338.712710] Broke affinity for irq 1 [45338.712719] Broke affinity for irq 9 [45338.712724] Broke affinity for irq 12 [45338.712728] Broke affinity for irq 16 [45338.712732] Broke affinity for irq 17 [45338.712736] Broke affinity for irq 23 [45338.712738] Broke affinity for irq 24 [45338.712739] Broke affinity for irq 25 [45338.712741] Broke affinity for irq 26 [45338.713765] smpboot: CPU 3 is now offline [45338.725767] ACPI: Low-level resume complete [45338.725829] ACPI : EC: EC started [45338.725830] PM: Restoring platform NVS memory [45338.726863] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26 [45338.726881] Enabling non-boot CPUs ... [45338.745853] x86: Booting SMP configuration: [45338.745854] smpboot: Booting Node 0 Processor 1 APIC 0x2 [45338.746489] microcode: CPU1 microcode updated early to revision 0x1c, date = 2015-02-26 [45338.746490] Initializing CPU#1 [45338.748756] cache: parent cpu1 should not be sleeping [45338.748906] CPU1 is up [45338.769897] smpboot: Booting Node 0 Processor 2 APIC 0x1 [45338.770177] Initializing CPU#2 [45338.772432] cache: parent cpu2 should not be sleeping [45338.772546] CPU2 is up [45338.789956] smpboot: Booting Node 0 Processor 3 APIC 0x3 [45338.790224] Initializing CPU#3 [45338.792512] cache: parent cpu3 should not be sleeping [45338.792628] CPU3 is up [45338.795664] ACPI: Waking up from system sleep state S3 [45339.257984] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [45339.258015] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [45339.258559] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [45339.258694] PM: noirq resume of devices complete after 16.812 msecs [45339.259027] PM: early resume of devices complete after 0.319 msecs [45339.259358] usb usb1: root hub lost power or was reset [45339.259574] rtlwifi: rtlwifi: wireless switch is on [45339.265707] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [45339.266222] sd 0:0:0:0: [sda] Starting disk [45339.273827] rtc_cmos 00:01: System wakeup disabled by ACPI [45339.589798] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [45339.592064] ata3.00: configured for UDMA/100 [45339.593788] usb 1-1: reset high-speed USB device number 2 using ehci-pci [45339.927606] psmouse serio2: synaptics: queried max coordinates: x [..5634], y [..4598] [45340.005823] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [45340.169841] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [45340.344465] PM: resume of devices complete after 1085.342 msecs [45340.345182] PM: Finishing wakeup. [45340.345184] Restarting tasks ... [45340.354044] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200 [45340.354051] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin [45340.354878] done. [45342.102033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [45342.103872] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20150930/dsopcode-236) [45342.103883] ACPI Error: Method parse/execution failed [\GTFB] (Node f38a2e40), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [45342.103895] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node f38a2f00), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [45342.103908] ata1.00: _GTF evaluation failed (AE 0x300a) [45342.269052] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20150930/dsopcode-236) [45342.269065] ACPI Error: Method parse/execution failed [\GTFB] (Node f38a2e40), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [45342.269076] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node f38a2f00), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [45342.269089] ata1.00: _GTF evaluation failed (AE 0x300a) [45342.269390] ata1.00: configured for UDMA/133 [45344.005176] usb 3-2: USB disconnect, device number 2 [45344.746243] usb 3-2: new low-speed USB device number 3 using xhci_hcd [45344.935972] usb 3-2: New USB device found, idVendor=04f3, idProduct=0103 [45344.935979] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [45344.936253] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [45344.936261] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [45344.940286] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:04F3:0103.0004/input/input33 [45344.940836] hid-generic 0003:04F3:0103.0004: input,hidraw0: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-2/input0 [45344.945072] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:04F3:0103.0005/input/input34 [45344.945365] hid-generic 0003:04F3:0103.0005: input,hidraw1: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:14.0-2/input1 [45372.038750] PM: Syncing filesystems ... [45372.474950] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [45372.475916] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [45372.478550] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [45372.862019] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [45378.957524] done. [45378.957550] PM: Preparing system for sleep (mem) [45379.604339] Freezing user space processes ... [45379.605910] Bluetooth: Unable to create CMAC crypto context [45379.670366] (elapsed 0.066 seconds) done. [45379.670375] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [45379.672027] PM: Suspending system (mem) [45379.672048] Suspending console(s) (use no_console_suspend to debug) [45379.672947] sd 0:0:0:0: [sda] Synchronizing SCSI cache [45379.673223] sd 0:0:0:0: [sda] Stopping disk [45380.333290] PM: suspend of devices complete after 660.966 msecs [45380.349282] PM: late suspend of devices complete after 15.981 msecs [45380.351017] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [45380.351116] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [45380.351331] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [45380.365443] PM: noirq suspend of devices complete after 16.155 msecs [45380.365884] ACPI: Preparing to enter system sleep state S3 [45380.367617] ACPI : EC: EC stopped [45380.367618] PM: Saving platform NVS memory [45380.367633] Disabling non-boot CPUs ... [45380.368037] Broke affinity for irq 26 [45380.369086] smpboot: CPU 1 is now offline [45380.386048] Broke affinity for irq 16 [45380.386053] Broke affinity for irq 17 [45380.386058] Broke affinity for irq 23 [45380.386062] Broke affinity for irq 24 [45380.386064] Broke affinity for irq 26 [45380.387107] smpboot: CPU 2 is now offline [45380.397993] Broke affinity for irq 1 [45380.398002] Broke affinity for irq 9 [45380.398007] Broke affinity for irq 12 [45380.398011] Broke affinity for irq 16 [45380.398015] Broke affinity for irq 17 [45380.398019] Broke affinity for irq 23 [45380.398021] Broke affinity for irq 24 [45380.398022] Broke affinity for irq 25 [45380.398023] Broke affinity for irq 26 [45380.399057] smpboot: CPU 3 is now offline [45380.415050] ACPI: Low-level resume complete [45380.415112] ACPI : EC: EC started [45380.415112] PM: Restoring platform NVS memory [45380.416151] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26 [45380.416168] Enabling non-boot CPUs ... [45380.435076] x86: Booting SMP configuration: [45380.435078] smpboot: Booting Node 0 Processor 1 APIC 0x2 [45380.435713] microcode: CPU1 microcode updated early to revision 0x1c, date = 2015-02-26 [45380.435714] Initializing CPU#1 [45380.437977] cache: parent cpu1 should not be sleeping [45380.438128] CPU1 is up [45380.455133] smpboot: Booting Node 0 Processor 2 APIC 0x1 [45380.455359] Initializing CPU#2 [45380.457643] cache: parent cpu2 should not be sleeping [45380.457794] CPU2 is up [45380.475090] smpboot: Booting Node 0 Processor 3 APIC 0x3 [45380.475316] Initializing CPU#3 [45380.477579] cache: parent cpu3 should not be sleeping [45380.477692] CPU3 is up [45380.480734] ACPI: Waking up from system sleep state S3 [45380.943204] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [45380.943770] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [45380.943772] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [45380.943892] PM: noirq resume of devices complete after 16.791 msecs [45380.944228] PM: early resume of devices complete after 0.322 msecs [45380.944471] usb usb1: root hub lost power or was reset [45380.944659] rtlwifi: rtlwifi: wireless switch is on [45380.947675] sd 0:0:0:0: [sda] Starting disk [45380.948384] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [45380.959161] rtc_cmos 00:01: System wakeup disabled by ACPI [45381.267023] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [45381.269341] ata3.00: configured for UDMA/100 [45381.279003] usb 1-1: reset high-speed USB device number 2 using ehci-pci [45381.614677] psmouse serio2: synaptics: queried max coordinates: x [..5634], y [..4598] [45381.691039] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [45381.855054] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [45381.971791] PM: resume of devices complete after 1027.471 msecs [45381.972612] PM: Finishing wakeup. [45381.972614] Restarting tasks ... [45381.974128] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200 [45381.974135] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin [45381.991023] done. [45382.040125] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [45382.040696] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [45382.041795] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [45382.425052] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [45383.739249] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [45383.741076] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20150930/dsopcode-236) [45383.741087] ACPI Error: Method parse/execution failed [\GTFB] (Node f38a2e40), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [45383.741097] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node f38a2f00), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [45383.741108] ata1.00: _GTF evaluation failed (AE 0x300a) [45383.909445] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20150930/dsopcode-236) [45383.909457] ACPI Error: Method parse/execution failed [\GTFB] (Node f38a2e40), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [45383.909468] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node f38a2f00), AE_AML_BUFFER_LIMIT (20150930/psparse-542) [45383.909481] ata1.00: _GTF evaluation failed (AE 0x300a) [45383.909778] ata1.00: configured for UDMA/133 [45407.120722] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [45408.490953] wlp2s0: authenticate with e8:de:27:58:b1:ce [45408.507484] wlp2s0: send auth to e8:de:27:58:b1:ce (try 1/3) [45408.509685] wlp2s0: authenticated [45408.513260] wlp2s0: associate with e8:de:27:58:b1:ce (try 1/3) [45408.517571] wlp2s0: RX AssocResp from e8:de:27:58:b1:ce (capab=0x431 status=0 aid=3) [45408.517824] wlp2s0: associated [45408.517836] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [45441.580023] usb 1-1.2: new full-speed USB device number 6 using ehci-pci [45441.674265] usb 1-1.2: New USB device found, idVendor=09da, idProduct=054f [45441.674272] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [45441.674275] usb 1-1.2: Product: USB Device [45441.674278] usb 1-1.2: Manufacturer: A4TECH [45441.676488] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:09DA:054F.0006/input/input41 [45441.732658] hid-generic 0003:09DA:054F.0006: input,hidraw2: USB HID v1.00 Mouse [A4TECH USB Device] on usb-0000:00:1a.0-1.2/input0 [45441.734955] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:09DA:054F.0007/input/input42 [45441.789616] hid-generic 0003:09DA:054F.0007: input,hiddev0,hidraw3: USB HID v1.00 Keyboard [A4TECH USB Device] on usb-0000:00:1a.0-1.2/input1 [45528.735346] usb 3-1: new high-speed USB device number 4 using xhci_hcd [45528.864590] usb 3-1: New USB device found, idVendor=03f0, idProduct=4907 [45528.864597] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [45528.864601] usb 3-1: Product: USB Mass Storage Device [45528.864604] usb 3-1: Manufacturer: Hewlett-Packard [45528.864607] usb 3-1: SerialNumber: 0010101640000DE40 [45529.847299] usb-storage 3-1:1.0: USB Mass Storage device detected [45529.848722] scsi host6: usb-storage 3-1:1.0 [45529.848892] usbcore: registered new interface driver usb-storage [45529.901698] usbcore: registered new interface driver uas [45530.857220] scsi 6:0:0:0: CD-ROM HP DVD Writer 556s MH22 PQ: 0 ANSI: 0 [45530.923200] sr 6:0:0:0: [sr1] scsi3-mmc drive: 188x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up [45530.923677] sr 6:0:0:0: Attached scsi CD-ROM sr1 [45530.923950] sr 6:0:0:0: Attached scsi generic sg2 type 5 [45562.399240] ISO 9660 Extensions: Microsoft Joliet Level 3 [45562.434199] ISOFS: changing to secondary root [45592.318283] sr 6:0:0:0: [sr1] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [45592.318295] sr 6:0:0:0: [sr1] tag#0 Sense Key : Not Ready [current] [45592.318303] sr 6:0:0:0: [sr1] tag#0 Add. Sense: Medium not present - tray open [45592.318311] sr 6:0:0:0: [sr1] tag#0 CDB: Read(10) 28 00 00 00 04 f8 00 00 01 00 [45592.318317] blk_update_request: I/O error, dev sr1, sector 5088 [45592.318363] ISOFS: unable to read i-node block [45592.324524] sr 6:0:0:0: [sr1] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [45592.324536] sr 6:0:0:0: [sr1] tag#0 Sense Key : Not Ready [current] [45592.324545] sr 6:0:0:0: [sr1] tag#0 Add. Sense: Medium not present - tray open [45592.324554] sr 6:0:0:0: [sr1] tag#0 CDB: Read(10) 28 00 00 00 04 ff 00 00 01 00 [45592.324560] blk_update_request: I/O error, dev sr1, sector 5116 [45592.324871] ISOFS: unable to read i-node block [45592.337311] VFS: busy inodes on changed media or resized disk sr1 [45592.499580] sr 6:0:0:0: [sr1] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [45592.499596] sr 6:0:0:0: [sr1] tag#0 Sense Key : Not Ready [current] [45592.499599] sr 6:0:0:0: [sr1] tag#0 Add. Sense: Medium not present - tray open [45592.499602] sr 6:0:0:0: [sr1] tag#0 CDB: Read(10) 28 00 00 00 03 9e 00 00 01 00 [45592.499604] blk_update_request: I/O error, dev sr1, sector 3704 [45592.504560] sr 6:0:0:0: [sr1] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [45592.504564] sr 6:0:0:0: [sr1] tag#0 Sense Key : Not Ready [current] [45592.504568] sr 6:0:0:0: [sr1] tag#0 Add. Sense: Medium not present - tray open [45592.504571] sr 6:0:0:0: [sr1] tag#0 CDB: Read(10) 28 00 00 00 03 9e 00 00 01 00 [45592.504574] blk_update_request: I/O error, dev sr1, sector 3704 [57986.871505] usb 3-1: USB disconnect, device number 4 [74412.302823] perf interrupt took too long (5019 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [79212.419001] BTRFS error (device sda4): could not find root 8 [79212.419012] BTRFS error (device sda4): could not find root 8