[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-9-generic (buildd@panlong) (gcc version 4.7.1 (Ubuntu/Linaro 4.7.1-6ubuntu1) ) #9-Ubuntu SMP Thu Aug 9 13:55:19 UTC 2012 (Ubuntu 3.5.0-9.9-generic 3.5.0) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffaffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffb0000-0x000000007ffbffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ffc0000-0x000000007ffeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: P4VM800/P4VM800, BIOS P1.00 05/23/2005 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7ffb0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff] [ 0.000000] [mem 0x00000000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x379fffff] page 2M [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: [mem 0x3719c000-0x37feffff] [ 0.000000] Allocated new RAMDISK: [mem 0x36348000-0x3719bbb0] [ 0.000000] Move RAMDISK from [mem 0x3719c000-0x37fefbb0] to [mem 0x36348000-0x3719bbb0] [ 0.000000] ACPI: RSDP 000fac80 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 7ffb0000 00030 (v01 A M I OEMRSDT 05000523 MSFT 00000097) [ 0.000000] ACPI: FACP 7ffb0200 00084 (v02 A M I OEMFACP 05000523 MSFT 00000097) [ 0.000000] ACPI: DSDT 7ffb03f0 034FE (v01 P4V80 P4V80000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 7ffc0000 00040 [ 0.000000] ACPI: APIC 7ffb0390 0005C (v01 A M I OEMAPIC 05000523 MSFT 00000097) [ 0.000000] ACPI: OEMB 7ffc0040 00046 (v01 A M I AMI_OEM 05000523 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1155MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x7ffaffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7ffaffff] [ 0.000000] On node 0 totalpages: 524095 [ 0.000000] free_area_init_node: node 0, pgdat c18a0540, node_mem_map f5348200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2312 pages used for memmap [ 0.000000] HighMem zone: 293546 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] e820: [mem 0x80000000-0xff77ffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd5000 s34112 r0 d23232 u57344 [ 0.000000] pcpu-alloc: s34112 r0 d23232 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=UUID=4bcd7de7-178e-4c44-9235-9628f484cb8d ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4193536 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007ffb0) [ 0.000000] Memory: 2049664k/2096832k available (5950k kernel code, 46716k reserved, 2934k data, 748k init, 1183432k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc18ae000 - 0xc1969000 ( 748 kB) [ 0.000000] .data : 0xc15cf818 - 0xc18ad2c0 (2934 kB) [ 0.000000] .text : 0xc1000000 - 0xc15cf818 (5950 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2266.684 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.36 BogoMIPS (lpj=9066736) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004061] Security Framework initialized [ 0.004103] AppArmor: AppArmor initialized [ 0.004107] Yama: becoming mindful. [ 0.004215] Mount-cache hash table entries: 512 [ 0.004641] Initializing cgroup subsys cpuacct [ 0.004649] Initializing cgroup subsys memory [ 0.004668] Initializing cgroup subsys devices [ 0.004672] Initializing cgroup subsys freezer [ 0.004676] Initializing cgroup subsys blkio [ 0.004680] Initializing cgroup subsys perf_event [ 0.004757] CPU0: Hyper-Threading is disabled [ 0.004763] mce: CPU supports 4 MCE banks [ 0.004788] CPU0: Thermal monitoring enabled (TM1) [ 0.004797] using mwait in idle threads. [ 0.005286] SMP alternatives: switching to UP code [ 0.031914] ACPI: Core revision 20120320 [ 0.036032] ftrace: allocating 24565 entries in 48 pages [ 0.052164] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.053479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.094429] CPU0: Intel(R) Celeron(R) CPU 2.26GHz stepping 01 [ 0.096005] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.096005] ... version: 0 [ 0.096005] ... bit width: 40 [ 0.096005] ... generic registers: 18 [ 0.096005] ... value mask: 000000ffffffffff [ 0.096005] ... max period: 0000007fffffffff [ 0.096005] ... fixed-purpose events: 0 [ 0.096005] ... event mask: 000000000003ffff [ 0.096005] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.096005] Brought up 1 CPUs [ 0.096005] Total of 1 processors activated (4533.36 BogoMIPS). [ 0.096005] devtmpfs: initialized [ 0.096005] EVM: security.selinux [ 0.096005] EVM: security.SMACK64 [ 0.096005] EVM: security.capability [ 0.096005] PM: Registering ACPI NVS region [mem 0x7ffc0000-0x7ffeffff] (196608 bytes) [ 0.096731] dummy: [ 0.096799] RTC time: 13:36:12, date: 08/10/12 [ 0.096912] NET: Registered protocol family 16 [ 0.097231] EISA bus registered [ 0.097382] ACPI: bus type pci registered [ 0.097592] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [ 0.097596] PCI: Using configuration type 1 for base access [ 0.099663] bio: create slab at 0 [ 0.099916] ACPI: Added _OSI(Module Device) [ 0.099923] ACPI: Added _OSI(Processor Device) [ 0.099927] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.099930] ACPI: Added _OSI(Processor Aggregator Device) [ 0.101012] ACPI: EC: Look up EC in DSDT [ 0.102627] ACPI: Executed 1 blocks of module-level executable AML code [ 0.105761] ACPI: Interpreter enabled [ 0.105781] ACPI: (supports S0 S1 S4 S5) [ 0.105819] ACPI: Using IOAPIC for interrupt routing [ 0.115489] ACPI: No dock devices found. [ 0.115508] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.115669] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.115880] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.115886] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.115891] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.115895] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.115899] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored) [ 0.115903] PCI: root bus 00: using default resources [ 0.116027] PCI host bridge to bus 0000:00 [ 0.116034] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.116039] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.116070] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000 [ 0.116088] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref] [ 0.116194] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000 [ 0.116262] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000 [ 0.116327] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000 [ 0.116390] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000 [ 0.116457] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000 [ 0.116524] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400 [ 0.116596] pci 0000:00:01.0: supports D1 [ 0.116644] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f [ 0.116671] pci 0000:00:0f.0: reg 10: [io 0xd400-0xd407] [ 0.116685] pci 0000:00:0f.0: reg 14: [io 0xd000-0xd003] [ 0.116700] pci 0000:00:0f.0: reg 18: [io 0xcc00-0xcc07] [ 0.116714] pci 0000:00:0f.0: reg 1c: [io 0xc800-0xc803] [ 0.116728] pci 0000:00:0f.0: reg 20: [io 0xc400-0xc40f] [ 0.116743] pci 0000:00:0f.0: reg 24: [io 0xc000-0xc0ff] [ 0.116816] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a [ 0.116884] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f] [ 0.116981] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 [ 0.117045] pci 0000:00:10.0: reg 20: [io 0xd800-0xd81f] [ 0.117103] pci 0000:00:10.0: supports D1 D2 [ 0.117109] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.117138] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 [ 0.117202] pci 0000:00:10.1: reg 20: [io 0xdc00-0xdc1f] [ 0.117260] pci 0000:00:10.1: supports D1 D2 [ 0.117266] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.117295] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 [ 0.117358] pci 0000:00:10.2: reg 20: [io 0xe000-0xe01f] [ 0.117416] pci 0000:00:10.2: supports D1 D2 [ 0.117421] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.117450] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300 [ 0.117514] pci 0000:00:10.3: reg 20: [io 0xec00-0xec1f] [ 0.117571] pci 0000:00:10.3: supports D1 D2 [ 0.117577] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.117615] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320 [ 0.117640] pci 0000:00:10.4: reg 10: [mem 0xf7fff800-0xf7fff8ff] [ 0.117737] pci 0000:00:10.4: supports D1 D2 [ 0.117743] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.117777] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100 [ 0.117865] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.117935] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100 [ 0.117960] pci 0000:00:11.5: reg 10: [io 0xe400-0xe4ff] [ 0.118062] pci 0000:00:11.5: supports D1 D2 [ 0.118092] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000 [ 0.118117] pci 0000:00:12.0: reg 10: [io 0xe800-0xe8ff] [ 0.118132] pci 0000:00:12.0: reg 14: [mem 0xf7fffc00-0xf7fffcff] [ 0.118221] pci 0000:00:12.0: supports D1 D2 [ 0.118226] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.118308] pci 0000:01:00.0: [10de:0221] type 00 class 0x030000 [ 0.118332] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] [ 0.118345] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref] [ 0.118357] pci 0000:01:00.0: reg 18: [mem 0xf5000000-0xf5ffffff] [ 0.118393] pci 0000:01:00.0: reg 30: [mem 0xf7ee0000-0xf7efffff pref] [ 0.118484] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.118494] pci 0000:00:01.0: bridge window [mem 0xf3e00000-0xf7efffff] [ 0.118501] pci 0000:00:01.0: bridge window [mem 0xd3d00000-0xf3cfffff pref] [ 0.118514] pci_bus 0000:00: on NUMA node 0 [ 0.118524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.118833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.118958] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.128820] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.128934] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.129036] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.129135] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.129234] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.129334] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.129453] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.129556] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.129827] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.129834] vgaarb: loaded [ 0.129836] vgaarb: bridge control possible 0000:01:00.0 [ 0.130278] SCSI subsystem initialized [ 0.130410] libata version 3.00 loaded. [ 0.130465] ACPI: bus type usb registered [ 0.130522] usbcore: registered new interface driver usbfs [ 0.130543] usbcore: registered new interface driver hub [ 0.130615] usbcore: registered new device driver usb [ 0.130845] PCI: Using ACPI for IRQ routing [ 0.130857] PCI: pci_cache_line_size set to 64 bytes [ 0.130967] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.130975] e820: reserve RAM buffer [mem 0x7ffb0000-0x7fffffff] [ 0.131198] NetLabel: Initializing [ 0.131204] NetLabel: domain hash size = 128 [ 0.131206] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.131226] NetLabel: unlabeled traffic allowed by default [ 0.145965] AppArmor: AppArmor Filesystem Enabled [ 0.146037] pnp: PnP ACPI init [ 0.146071] ACPI: bus type pnp registered [ 0.146290] pnp 00:00: [bus 00-ff] [ 0.146297] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.146302] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.146307] pnp 00:00: [io 0x0d00-0xffff window] [ 0.146311] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.146316] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.146320] pnp 00:00: [mem 0x80000000-0xffffffff window] [ 0.146431] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.146489] pnp 00:01: [dma 4] [ 0.146494] pnp 00:01: [io 0x0000-0x000f] [ 0.146498] pnp 00:01: [io 0x0081-0x0083] [ 0.146502] pnp 00:01: [io 0x0087] [ 0.146505] pnp 00:01: [io 0x0089-0x008b] [ 0.146509] pnp 00:01: [io 0x008f] [ 0.146512] pnp 00:01: [io 0x00c0-0x00df] [ 0.146566] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.146592] pnp 00:02: [io 0x0070-0x0071] [ 0.146619] pnp 00:02: [irq 8] [ 0.146669] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.146690] pnp 00:03: [io 0x0061] [ 0.146748] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.146771] pnp 00:04: [io 0x00f0-0x00ff] [ 0.146783] pnp 00:04: [irq 13] [ 0.146834] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.147854] pnp 00:05: [io 0x0378-0x037f] [ 0.147861] pnp 00:05: [io 0x0778-0x077b] [ 0.147873] pnp 00:05: [irq 7] [ 0.147878] pnp 00:05: [dma 3] [ 0.148255] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.148892] pnp 00:06: [io 0x0010-0x001f] [ 0.148899] pnp 00:06: [io 0x0022-0x003f] [ 0.148902] pnp 00:06: [io 0x0044-0x005f] [ 0.148906] pnp 00:06: [io 0x0062-0x0063] [ 0.148909] pnp 00:06: [io 0x0065-0x006f] [ 0.148913] pnp 00:06: [io 0x0072-0x007f] [ 0.148916] pnp 00:06: [io 0x0080] [ 0.148920] pnp 00:06: [io 0x0084-0x0086] [ 0.148923] pnp 00:06: [io 0x0088] [ 0.148926] pnp 00:06: [io 0x008c-0x008e] [ 0.148930] pnp 00:06: [io 0x0090-0x009f] [ 0.148933] pnp 00:06: [io 0x00a2-0x00bf] [ 0.148937] pnp 00:06: [io 0x00e0-0x00ef] [ 0.148940] pnp 00:06: [io 0x0295-0x0296] [ 0.148944] pnp 00:06: [io 0x03e0-0x03e7] [ 0.148948] pnp 00:06: [mem 0xfff80000-0xffffffff] [ 0.148952] pnp 00:06: [io 0x04d0-0x04d1] [ 0.148955] pnp 00:06: [io 0x0800-0x087f] [ 0.148958] pnp 00:06: [io 0x0400-0x041f] [ 0.148963] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 0.149111] system 00:06: [io 0x0295-0x0296] has been reserved [ 0.149117] system 00:06: [io 0x03e0-0x03e7] has been reserved [ 0.149122] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.149127] system 00:06: [io 0x0800-0x087f] has been reserved [ 0.149131] system 00:06: [io 0x0400-0x041f] has been reserved [ 0.149138] system 00:06: [mem 0xfff80000-0xffffffff] has been reserved [ 0.149147] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.149271] pnp 00:07: [mem 0xfec00000-0xfec00fff] [ 0.149276] pnp 00:07: [mem 0xfee00000-0xfee00fff] [ 0.149383] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.149389] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.149396] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.149480] pnp 00:08: [io 0x0060] [ 0.149485] pnp 00:08: [io 0x0064] [ 0.149503] pnp 00:08: [irq 1] [ 0.149578] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.150096] pnp 00:09: [io 0x03f8-0x03ff] [ 0.150111] pnp 00:09: [irq 4] [ 0.150117] pnp 00:09: [dma 0 disabled] [ 0.150292] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.150562] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.150568] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.150572] pnp 00:0a: [mem 0x000e0000-0x000fffff] [ 0.150576] pnp 00:0a: [mem 0x00100000-0x7fffffff] [ 0.150580] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.150704] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.150711] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.150715] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.150723] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.151019] pnp: PnP ACPI: found 11 devices [ 0.151023] ACPI: ACPI bus type pnp unregistered [ 0.151030] PnPBIOS: Disabled by ACPI PNP [ 0.189596] Switching to clocksource acpi_pm [ 0.189693] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.189707] pci 0000:00:01.0: bridge window [mem 0xf3e00000-0xf7efffff] [ 0.189714] pci 0000:00:01.0: bridge window [mem 0xd3d00000-0xf3cfffff pref] [ 0.189742] pci 0000:00:01.0: setting latency timer to 64 [ 0.189750] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.189754] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.189759] pci_bus 0000:01: resource 1 [mem 0xf3e00000-0xf7efffff] [ 0.189762] pci_bus 0000:01: resource 2 [mem 0xd3d00000-0xf3cfffff pref] [ 0.189845] NET: Registered protocol family 2 [ 0.189960] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.190354] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.192011] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.192011] TCP: Hash tables configured (established 131072 bind 65536) [ 0.192011] TCP: reno registered [ 0.192011] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.192011] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.192011] NET: Registered protocol family 1 [ 0.192011] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.192011] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.192011] pci 0000:01:00.0: Boot video device [ 0.192011] PCI: CLS 32 bytes, default 64 [ 0.192824] audit: initializing netlink socket (disabled) [ 0.192852] type=2000 audit(1344605772.188:1): initialized [ 0.226414] Trying to unpack rootfs image as initramfs... [ 0.265049] highmem bounce pool size: 64 pages [ 0.265076] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.275756] VFS: Disk quotas dquot_6.5.2 [ 0.275860] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.277099] fuse init (API version 7.19) [ 0.277321] msgmni has been set to 1691 [ 0.292694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.292830] io scheduler noop registered [ 0.292835] io scheduler deadline registered (default) [ 0.292862] io scheduler cfq registered [ 0.293132] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.293185] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.293475] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.293487] ACPI: Power Button [PWRB] [ 0.293578] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.293585] ACPI: Power Button [PWRF] [ 0.304810] GHES: HEST is not enabled! [ 0.305143] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.325637] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.328603] isapnp: Scanning for PnP cards... [ 0.425215] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.484539] Linux agpgart interface v0.103 [ 0.484670] agpgart: Detected VIA VT3314 chipset [ 0.496256] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 0.502407] brd: module loaded [ 0.508378] loop: module loaded [ 0.509514] Fixed MDIO Bus: probed [ 0.509615] tun: Universal TUN/TAP device driver, 1.6 [ 0.509619] tun: (C) 1999-2004 Max Krasnyansky [ 0.509761] PPP generic driver version 2.4.2 [ 0.509875] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.509987] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.510002] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.510109] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf7fff800 [ 0.520389] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.520475] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.520481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.520486] usb usb1: Product: EHCI Host Controller [ 0.520489] usb usb1: Manufacturer: Linux 3.5.0-9-generic ehci_hcd [ 0.520493] usb usb1: SerialNumber: 0000:00:10.4 [ 0.520790] hub 1-0:1.0: USB hub found [ 0.520803] hub 1-0:1.0: 8 ports detected [ 0.520962] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.521022] uhci_hcd: USB Universal Host Controller Interface driver [ 0.521095] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.521109] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.521150] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800 [ 0.521219] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.521224] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.521228] usb usb2: Product: UHCI Host Controller [ 0.521232] usb usb2: Manufacturer: Linux 3.5.0-9-generic uhci_hcd [ 0.521235] usb usb2: SerialNumber: 0000:00:10.0 [ 0.521491] hub 2-0:1.0: USB hub found [ 0.521503] hub 2-0:1.0: 2 ports detected [ 0.521644] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.521661] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.521700] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00 [ 0.521767] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.521772] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.521776] usb usb3: Product: UHCI Host Controller [ 0.521779] usb usb3: Manufacturer: Linux 3.5.0-9-generic uhci_hcd [ 0.521783] usb usb3: SerialNumber: 0000:00:10.1 [ 0.522018] hub 3-0:1.0: USB hub found [ 0.522028] hub 3-0:1.0: 2 ports detected [ 0.522169] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.522181] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.522220] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 [ 0.522287] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.522292] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.522296] usb usb4: Product: UHCI Host Controller [ 0.522299] usb usb4: Manufacturer: Linux 3.5.0-9-generic uhci_hcd [ 0.522303] usb usb4: SerialNumber: 0000:00:10.2 [ 0.522528] hub 4-0:1.0: USB hub found [ 0.522537] hub 4-0:1.0: 2 ports detected [ 0.522681] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.522693] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.522732] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00 [ 0.522795] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.522800] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.522804] usb usb5: Product: UHCI Host Controller [ 0.522807] usb usb5: Manufacturer: Linux 3.5.0-9-generic uhci_hcd [ 0.522811] usb usb5: SerialNumber: 0000:00:10.3 [ 0.523040] hub 5-0:1.0: USB hub found [ 0.523049] hub 5-0:1.0: 2 ports detected [ 0.523300] usbcore: registered new interface driver libusual [ 0.523379] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.523383] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.523660] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.528767] mousedev: PS/2 mouse device common for all mice [ 0.529117] rtc_cmos 00:02: RTC can wake from S4 [ 0.529388] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.529459] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.529588] device-mapper: uevent: version 1.0.3 [ 0.529751] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.529855] EISA: Probing bus 0 at eisa.0 [ 0.529909] EISA: Detected 0 cards. [ 0.529925] cpuidle: using governor ladder [ 0.529929] cpuidle: using governor menu [ 0.529932] EFI Variables Facility v0.08 2004-May-17 [ 0.530418] ashmem: initialized [ 0.530673] TCP: cubic registered [ 0.530894] NET: Registered protocol family 10 [ 0.531264] NET: Registered protocol family 17 [ 0.531301] Key type dns_resolver registered [ 0.531433] Using IPI No-Shortcut mode [ 0.531756] PM: Hibernation image not present or could not be loaded. [ 0.531785] registered taskstats version 1 [ 0.792672] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.932085] isapnp: No Plug & Play device found [ 1.108282] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 1.224715] Refined TSC clocksource calibration: 2266.593 MHz. [ 1.224730] Switching to clocksource tsc [ 1.234791] Freeing initrd memory: 14672k freed [ 1.269928] Key type trusted registered [ 1.276339] Key type encrypted registered [ 1.282976] Magic number: 8:721:634 [ 1.283157] rtc_cmos 00:02: setting system clock to 2012-08-10 13:36:13 UTC (1344605773) [ 1.283323] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.283328] EDD information not available. [ 1.283596] Freeing unused kernel memory: 748k freed [ 1.285018] Write protecting the kernel text: 5952k [ 1.285051] Write protecting the kernel read-only data: 2428k [ 1.305842] usb 3-1: New USB device found, idVendor=046d, idProduct=c518 [ 1.305852] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.305857] usb 3-1: Product: USB Receiver [ 1.305861] usb 3-1: Manufacturer: Logitech [ 1.345978] udevd[84]: starting version 175 [ 1.715047] sata_via 0000:00:0f.0: version 2.6 [ 1.715141] sata_via 0000:00:0f.0: routed to hard irq line 5 [ 1.723397] scsi0 : sata_via [ 1.728109] scsi1 : sata_via [ 1.728279] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd000 bmdma 0xc400 irq 20 [ 1.728285] ata2: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xc408 irq 20 [ 1.728478] pata_via 0000:00:0f.1: version 0.3.4 [ 1.732139] scsi2 : pata_via [ 1.736112] scsi3 : pata_via [ 1.739981] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.739989] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.766495] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker [ 1.774242] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xf7fffc00, 00:13:8f:14:af:eb, IRQ 23 [ 1.775014] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 4de1 [ 1.844265] usbcore: registered new interface driver usbhid [ 1.844273] usbhid: USB HID core driver [ 1.932090] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 2.080608] ata3.00: ATA-6: ST3100011A, 3.02, max UDMA/100 [ 2.080619] ata3.00: 195371568 sectors, multi 16: LBA48 [ 2.142517] ata3.01: ATA-7: ST3250820ACE, 3.ACM, max UDMA/100 [ 2.142523] ata3.01: 488397168 sectors, multi 16: LBA48 [ 2.144023] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 2.160447] ata3.00: configured for UDMA/100 [ 2.209080] ata3.01: configured for UDMA/100 [ 2.209332] scsi 2:0:0:0: Direct-Access ATA ST3100011A 3.02 PQ: 0 ANSI: 5 [ 2.210144] sd 2:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) [ 2.210258] sd 2:0:0:0: [sda] Write Protect is off [ 2.210264] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.210312] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.211515] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.253227] sda: sda1 sda2 < sda5 > sda3 sda4 [ 2.254589] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.254830] scsi 2:0:1:0: Direct-Access ATA ST3250820ACE 3.AC PQ: 0 ANSI: 5 [ 2.255219] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 2.255588] sd 2:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.255705] sd 2:0:1:0: [sdb] Write Protect is off [ 2.255711] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.255757] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.340154] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 > [ 2.342004] sd 2:0:1:0: [sdb] Attached SCSI disk [ 2.432398] ata4.00: ATAPI: ATAPI DVD A DH20A4P, 9P59, max UDMA/66 [ 2.432411] ata4.00: limited to UDMA/33 due to 40-wire cable [ 2.464253] ata4.00: configured for UDMA/33 [ 2.466132] scsi 3:0:0:0: CD-ROM ATAPI DVD A DH20A4P 9P59 PQ: 0 ANSI: 5 [ 2.469085] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.469095] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.469399] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.469566] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 2.527485] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input3 [ 2.529919] hid-generic 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-1/input0 [ 2.554136] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.1/input/input4 [ 2.557066] hid-generic 0003:046D:C518.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.1-1/input1 [ 5.582164] EXT4-fs (sda3): INFO: recovery required on readonly filesystem [ 5.582174] EXT4-fs (sda3): write access will be enabled during recovery [ 8.483753] EXT4-fs (sda3): orphan cleanup on readonly fs [ 8.483779] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 656980 [ 8.496812] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 655754 [ 8.496991] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 655716 [ 8.497049] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 655988 [ 8.497144] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 655222 [ 8.497178] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 656011 [ 8.497209] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 657096 [ 8.497238] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 655068 [ 8.497318] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 655221 [ 8.497345] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 655219 [ 8.497412] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 655981 [ 8.497467] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 795653 [ 8.497495] EXT4-fs (sda3): 12 orphan inodes deleted [ 8.497499] EXT4-fs (sda3): recovery complete [ 8.614099] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 22.402780] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.484498] udevd[324]: starting version 175 [ 22.505354] Adding 4092k swap on /dev/sda5. Priority:-1 extents:1 across:4092k [ 22.887895] lp: driver loaded but no devices found [ 23.070208] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.396322] wmi: Mapper loaded [ 23.488595] parport_pc 00:05: reported by Plug and Play ACPI [ 23.488749] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 23.571114] [drm] Initialized drm 1.1.0 20060810 [ 23.580450] lp0: using parport0 (interrupt-driven). [ 24.321226] microcode: CPU0 sig=0xf41, pf=0x4, revision=0xd [ 24.386184] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04a100a1) [ 24.428960] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [ 24.509520] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 24.509528] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN [ 24.509533] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 24.509539] [drm] nouveau 0000:01:00.0: Bios version 05.44.a2.10 [ 24.509544] [drm] nouveau 0000:01:00.0: TMDS table version 1.1 [ 24.616173] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 24.616185] [drm] nouveau 0000:01:00.0: DCB version 3.0 [ 24.616191] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00000028 [ 24.616195] [drm] nouveau 0000:01:00.0: DCB outp 01: 02011310 00000028 [ 24.616198] [drm] nouveau 0000:01:00.0: DCB outp 02: 01011312 00000000 [ 24.616202] [drm] nouveau 0000:01:00.0: DCB outp 03: 020223f1 00c0c080 [ 24.616206] [drm] nouveau 0000:01:00.0: DCB conn 00: 0000 [ 24.616210] [drm] nouveau 0000:01:00.0: DCB conn 01: 2230 [ 24.616214] [drm] nouveau 0000:01:00.0: DCB conn 02: 0110 [ 24.616217] [drm] nouveau 0000:01:00.0: DCB conn 03: 0111 [ 24.616220] [drm] nouveau 0000:01:00.0: DCB conn 04: 0113 [ 24.616231] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDEB0 [ 24.618653] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE19E [ 24.631790] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE6D8 [ 24.631817] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE835 [ 24.632945] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE9BE [ 24.694259] [TTM] Zone kernel: Available graphics memory: 440826 kiB [ 24.694262] [TTM] Zone highmem: Available graphics memory: 1032542 kiB [ 24.694263] [TTM] Initializing pool allocator [ 24.694273] [TTM] Initializing DMA pool allocator [ 24.694306] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (DDR2) [ 24.694693] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 24.694716] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. [ 24.694727] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 24.694818] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [ 24.694822] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 24.695053] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 24.826224] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 24.826233] [drm] No driver support for vblank timestamp query. [ 25.167206] [drm] nouveau 0000:01:00.0: 1 available performance level(s) [ 25.167218] [drm] nouveau 0000:01:00.0: 0: core 350MHz shader 350MHz memory 532MHz fanspeed 100% [ 25.167223] [drm] nouveau 0000:01:00.0: c: core 200MHz memory 401MHz fanspeed 100% [ 25.239099] [drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies [ 25.239119] [drm] nouveau 0000:01:00.0: 0xD2AC: Parsing digital output script table [ 25.305020] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 25.305032] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 25.305037] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 25.305044] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 25.493684] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 25.549962] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f1258600 [ 25.555745] fbcon: nouveaufb (fb0) is primary device [ 25.567682] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 25.567688] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A [ 25.757782] Console: switching to colour frame buffer device 160x64 [ 25.760238] fb0: nouveaufb frame buffer device [ 25.760240] drm: registered panic notifier [ 25.818326] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 25.934830] ppdev: user-space parallel port driver [ 26.270441] init: failsafe main process (717) killed by TERM signal [ 26.447643] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 27.282472] type=1400 audit(1344605799.493:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=781 comm="apparmor_parser" [ 27.283558] type=1400 audit(1344605799.493:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=781 comm="apparmor_parser" [ 27.539954] snd_via82xx 0000:00:11.5: setting latency timer to 64 [ 27.645936] Bluetooth: Core ver 2.16 [ 27.647502] NET: Registered protocol family 31 [ 27.647511] Bluetooth: HCI device and connection manager initialized [ 27.649314] Bluetooth: HCI socket layer initialized [ 27.649323] Bluetooth: L2CAP socket layer initialized [ 27.649345] Bluetooth: SCO socket layer initialized [ 27.719219] type=1400 audit(1344605799.929:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=820 comm="apparmor_parser" [ 27.749897] type=1400 audit(1344605799.961:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=822 comm="apparmor_parser" [ 27.750830] type=1400 audit(1344605799.961:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=822 comm="apparmor_parser" [ 27.751286] type=1400 audit(1344605799.961:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=822 comm="apparmor_parser" [ 27.784130] type=1400 audit(1344605799.997:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=823 comm="apparmor_parser" [ 27.795567] type=1400 audit(1344605800.005:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=823 comm="apparmor_parser" [ 27.798738] type=1400 audit(1344605800.009:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=823 comm="apparmor_parser" [ 27.803126] type=1400 audit(1344605800.013:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=823 comm="apparmor_parser" [ 27.903795] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.903804] Bluetooth: BNEP filters: protocol multicast [ 28.416526] init: Failed to spawn alsa-restore main process: unable to execute: No such file or directory