[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19 01:38:40 UTC 2010 (Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-24-generic root=UUID=e193d3fe-d710-4375-a9a2-c1d8fffab08c ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cff9e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000cffee000 (reserved) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] modified: 00000000cff90000 - 00000000cff9e000 (ACPI data) [ 0.000000] modified: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000cffee000 (reserved) [ 0.000000] modified: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 12000-14000 [ 0.000000] RAMDISK: 377fd000 - 37fefa3e [ 0.000000] ACPI: RSDP 00000000000fb6b0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cff90000 00044 (v01 061808 RSDT1622 20080618 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90200 00084 (v01 061808 FACP1622 20080618 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff90450 0AAD0 (v01 A1046 A1046000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cff9e000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 00080 (v01 061808 APIC1622 20080618 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 061808 OEMMCFG 20080618 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff9e040 00072 (v01 061808 OEMB1622 20080618 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff9af20 00038 (v01 061808 OEMHPET0 20080618 MSFT 00000097) [ 0.000000] ACPI: INFO 00000000cff9e0c0 00124 (v01 061808 AMDINFO 20080618 MSFT 00000097) [ 0.000000] ACPI: NVHD 00000000cff9e1f0 00284 (v01 061808 NVHDCP 20080618 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9af60 00544 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000003dfff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377fd000 - 0037fefa3e] RAMDISK ==> [00377fd000 - 0037fefa3e] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a3028c] BRK ==> [0001a30000 - 0001a3028c] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048350 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3823 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000 [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cff9e000 [ 0.000000] PM: Registered nosave memory: 00000000cff9e000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000cffee000 [ 0.000000] PM: Registered nosave memory: 00000000cffee000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031223 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-24-generic root=UUID=e193d3fe-d710-4375-a9a2-c1d8fffab08c ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4049172k/4980736k available (5422k kernel code, 787336k absent, 144228k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2199.787 MHz processor. [ 0.020006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.56 BogoMIPS (lpj=21997840) [ 0.020029] Security Framework initialized [ 0.020050] AppArmor: AppArmor initialized [ 0.030401] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.032010] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.032702] Mount-cache hash table entries: 256 [ 0.032831] Initializing cgroup subsys ns [ 0.032835] Initializing cgroup subsys cpuacct [ 0.032839] Initializing cgroup subsys memory [ 0.032846] Initializing cgroup subsys devices [ 0.032849] Initializing cgroup subsys freezer [ 0.032851] Initializing cgroup subsys net_cls [ 0.032869] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.032872] CPU: L2 Cache: 512K (64 bytes/line) [ 0.032874] CPU 0/0x0 -> Node 0 [ 0.032877] tseg: 0000000000 [ 0.032893] CPU: Physical Processor ID: 0 [ 0.032895] CPU: Processor Core ID: 0 [ 0.032897] mce: CPU supports 6 MCE banks [ 0.032908] using C1E aware idle routine [ 0.032910] Performance Events: AMD PMU driver. [ 0.032914] ... version: 0 [ 0.032916] ... bit width: 48 [ 0.032917] ... generic registers: 4 [ 0.032919] ... value mask: 0000ffffffffffff [ 0.032920] ... max period: 00007fffffffffff [ 0.032922] ... fixed-purpose events: 0 [ 0.032923] ... event mask: 000000000000000f [ 0.034537] ACPI: Core revision 20090903 [ 0.049931] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.049935] ftrace: allocating 22527 entries in 89 pages [ 0.056448] Setting APIC routing to flat [ 0.056939] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.156954] CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.310022] CPU1: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.310033] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.320063] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.030000] Initializing CPU#2 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 2/0x2 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 2 [ 0.480114] CPU2: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.480124] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.490061] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.030000] Initializing CPU#3 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 3/0x3 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 3 [ 0.650050] CPU3: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.650060] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.660011] Brought up 4 CPUs [ 0.660014] Total of 4 processors activated (17599.70 BogoMIPS). [ 0.661019] CPU0 attaching sched-domain: [ 0.661022] domain 0: span 0-3 level MC [ 0.661024] groups: 0 1 2 3 [ 0.661030] CPU1 attaching sched-domain: [ 0.661032] domain 0: span 0-3 level MC [ 0.661033] groups: 1 2 3 0 [ 0.661038] CPU2 attaching sched-domain: [ 0.661039] domain 0: span 0-3 level MC [ 0.661041] groups: 2 3 0 1 [ 0.661045] CPU3 attaching sched-domain: [ 0.661047] domain 0: span 0-3 level MC [ 0.661048] groups: 3 0 1 2 [ 0.661146] devtmpfs: initialized [ 0.661146] regulator: core version 0.5 [ 0.661146] Time: 22:49:10 Date: 08/26/10 [ 0.661146] NET: Registered protocol family 16 [ 0.661146] Trying to unpack rootfs image as initramfs... [ 0.661146] node 0 link 0: io port [1000, ffffff] [ 0.661146] node 0 link 0: io port [1000, 1fff] [ 0.661146] TOM: 00000000d0000000 aka 3328M [ 0.661146] Fam 10h mmconf [e0000000, e00fffff] [ 0.661146] node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff] [ 0.661146] node 0 link 0: mmio [a0000, bffff] [ 0.661146] node 0 link 0: mmio [d0000000, fe0bffff] ==> [d0000000, dfffffff] and [e0100000, fe0bffff] [ 0.661146] TOM2: 0000000130000000 aka 4864M [ 0.661146] bus: [00,07] on node 0 link 0 [ 0.661146] bus: 00 index 0 io port: [0, ffff] [ 0.661146] bus: 00 index 1 mmio: [e0100000, ffffffff] [ 0.661146] bus: 00 index 2 mmio: [a0000, bffff] [ 0.661146] bus: 00 index 3 mmio: [d0000000, dfffffff] [ 0.661146] bus: 00 index 4 mmio: [130000000, fcffffffff] [ 0.661146] ACPI: bus type pci registered [ 0.661146] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.661146] PCI: Not using MMCONFIG. [ 0.661146] PCI: Using configuration type 1 for base access [ 0.661146] PCI: Using configuration type 1 for extended access [ 0.661146] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.661146] mtrr: probably your BIOS does not setup all CPUs. [ 0.661146] mtrr: corrected configuration. [ 0.661146] bio: create slab at 0 [ 0.661146] ACPI: EC: Look up EC in DSDT [ 0.671248] ACPI: Executed 1 blocks of module-level executable AML code [ 0.681309] ACPI: Interpreter enabled [ 0.681314] ACPI: (supports S0 S1 S3 S4 S5) [ 0.681336] ACPI: Using IOAPIC for interrupt routing [ 0.681401] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.690423] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.698400] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.715319] ACPI Warning: Incorrect checksum in table [OEMB] - 0E, should be 01 (20090903/tbutils-314) [ 0.715568] ACPI: No dock devices found. [ 0.716014] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.716282] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff] [ 0.716325] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f] [ 0.716336] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f] [ 0.716341] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f] [ 0.716361] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.716367] pci 0000:00:01.1: PME# disabled [ 0.716431] pci 0000:00:01.3: reg 10 32bit mmio: [0xf9e80000-0xf9efffff] [ 0.716562] pci 0000:00:02.0: reg 10 32bit mmio: [0xf9e7e000-0xf9e7efff] [ 0.716587] pci 0000:00:02.0: supports D1 D2 [ 0.716589] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.716592] pci 0000:00:02.0: PME# disabled [ 0.716616] pci 0000:00:02.1: reg 10 32bit mmio: [0xf9e7fc00-0xf9e7fcff] [ 0.716646] pci 0000:00:02.1: supports D1 D2 [ 0.716647] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.716651] pci 0000:00:02.1: PME# disabled [ 0.716681] pci 0000:00:04.0: reg 10 32bit mmio: [0xf9e7d000-0xf9e7dfff] [ 0.716706] pci 0000:00:04.0: supports D1 D2 [ 0.716707] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.716711] pci 0000:00:04.0: PME# disabled [ 0.716736] pci 0000:00:04.1: reg 10 32bit mmio: [0xf9e7f800-0xf9e7f8ff] [ 0.716765] pci 0000:00:04.1: supports D1 D2 [ 0.716767] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.716770] pci 0000:00:04.1: PME# disabled [ 0.716806] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.716847] pci 0000:00:07.0: reg 10 32bit mmio: [0xf9e78000-0xf9e7bfff] [ 0.716876] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.716879] pci 0000:00:07.0: PME# disabled [ 0.716942] pci 0000:00:09.0: reg 10 io port: [0xc480-0xc487] [ 0.716946] pci 0000:00:09.0: reg 14 io port: [0xc400-0xc403] [ 0.716949] pci 0000:00:09.0: reg 18 io port: [0xc080-0xc087] [ 0.716953] pci 0000:00:09.0: reg 1c io port: [0xc000-0xc003] [ 0.716957] pci 0000:00:09.0: reg 20 io port: [0xbc00-0xbc0f] [ 0.716961] pci 0000:00:09.0: reg 24 32bit mmio: [0xf9e76000-0xf9e77fff] [ 0.717003] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf9e7c000-0xf9e7cfff] [ 0.717007] pci 0000:00:0a.0: reg 14 io port: [0xb880-0xb887] [ 0.717010] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf9e7f400-0xf9e7f4ff] [ 0.717014] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf9e7f000-0xf9e7f00f] [ 0.717036] pci 0000:00:0a.0: supports D1 D2 [ 0.717038] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.717042] pci 0000:00:0a.0: PME# disabled [ 0.717295] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.717302] pci 0000:00:10.0: PME# disabled [ 0.717584] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.717591] pci 0000:00:12.0: PME# disabled [ 0.717871] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.717878] pci 0000:00:13.0: PME# disabled [ 0.718027] pci 0000:01:08.0: reg 10 io port: [0xd800-0xd8ff] [ 0.718033] pci 0000:01:08.0: reg 14 32bit mmio: [0xf9fff000-0xf9ffffff] [ 0.718091] pci 0000:00:08.0: transparent bridge [ 0.718094] pci 0000:00:08.0: bridge io port: [0xd000-0xdfff] [ 0.718097] pci 0000:00:08.0: bridge 32bit mmio: [0xf9f00000-0xf9ffffff] [ 0.718133] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.718141] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.718148] pci 0000:02:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.718153] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.718158] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfebe0000-0xfebfffff] [ 0.718226] pci 0000:00:10.0: bridge io port: [0xe000-0xefff] [ 0.718234] pci 0000:00:10.0: bridge 32bit mmio: [0xfa000000-0xfebfffff] [ 0.718248] pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.718434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.718730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.718857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.718928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.718996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.737538] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.737811] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.738083] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 [ 0.738349] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.738619] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.738889] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.739153] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.739418] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.739686] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.739952] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.740231] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.740494] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.740764] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11 [ 0.741028] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.741291] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.741557] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.741825] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15 [ 0.742091] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.742357] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.742620] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.742885] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled. [ 0.743149] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.743412] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.743676] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.743941] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.744209] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.744481] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.744746] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.745013] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.745286] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.745555] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.745822] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.746090] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.746355] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.746620] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.746888] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.747158] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.747428] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15 [ 0.747697] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 0.747965] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15 [ 0.748229] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled. [ 0.748503] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.748770] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 0.749040] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.749360] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.749637] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11 [ 0.749912] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 [ 0.750073] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.750075] vgaarb: loaded [ 0.750184] SCSI subsystem initialized [ 0.750275] libata version 3.00 loaded. [ 0.750275] usbcore: registered new interface driver usbfs [ 0.750275] usbcore: registered new interface driver hub [ 0.750275] usbcore: registered new device driver usb [ 0.750275] ACPI: WMI: Mapper loaded [ 0.750275] PCI: Using ACPI for IRQ routing [ 0.750275] NetLabel: Initializing [ 0.750275] NetLabel: domain hash size = 128 [ 0.750275] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.750275] NetLabel: unlabeled traffic allowed by default [ 0.750275] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.750280] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.780033] Switching to clocksource tsc [ 0.781459] AppArmor: AppArmor Filesystem Enabled [ 0.781470] pnp: PnP ACPI init [ 0.781483] ACPI: bus type pnp registered [ 0.785363] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.785366] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.791438] pnp: PnP ACPI: found 15 devices [ 0.791440] ACPI: ACPI bus type pnp unregistered [ 0.791454] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.791457] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.791459] system 00:06: ioport range 0x500-0x57f has been reserved [ 0.791461] system 00:06: ioport range 0x580-0x5ff has been reserved [ 0.791464] system 00:06: ioport range 0x800-0x87f could not be reserved [ 0.791466] system 00:06: ioport range 0x880-0x8ff has been reserved [ 0.791469] system 00:06: ioport range 0xd00-0xd7f has been reserved [ 0.791471] system 00:06: ioport range 0xd80-0xdff has been reserved [ 0.791475] system 00:06: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.791478] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.791483] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.791486] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.791491] system 00:0b: ioport range 0x230-0x23f has been reserved [ 0.791493] system 00:0b: ioport range 0x290-0x29f has been reserved [ 0.791496] system 00:0b: ioport range 0xa00-0xa0f has been reserved [ 0.791498] system 00:0b: ioport range 0xa10-0xa1f has been reserved [ 0.791503] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.791507] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.791510] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.791512] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.791515] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved [ 0.791518] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.796267] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.796270] pci 0000:00:08.0: IO window: 0xd000-0xdfff [ 0.796274] pci 0000:00:08.0: MEM window: 0xf9f00000-0xf9ffffff [ 0.796277] pci 0000:00:08.0: PREFETCH window: disabled [ 0.796281] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02 [ 0.796286] pci 0000:00:10.0: IO window: 0xe000-0xefff [ 0.796296] pci 0000:00:10.0: MEM window: 0xfa000000-0xfebfffff [ 0.796303] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.796317] pci 0000:00:12.0: PCI bridge, secondary bus 0000:03 [ 0.796319] pci 0000:00:12.0: IO window: disabled [ 0.796328] pci 0000:00:12.0: MEM window: disabled [ 0.796335] pci 0000:00:12.0: PREFETCH window: disabled [ 0.796348] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04 [ 0.796349] pci 0000:00:13.0: IO window: disabled [ 0.796359] pci 0000:00:13.0: MEM window: disabled [ 0.796366] pci 0000:00:13.0: PREFETCH window: disabled [ 0.796384] pci 0000:00:08.0: setting latency timer to 64 [ 0.796773] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.796776] alloc irq_desc for 19 on node 0 [ 0.796778] alloc kstat_irqs on node 0 [ 0.796787] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.796795] pci 0000:00:10.0: setting latency timer to 64 [ 0.797172] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 0.797174] alloc irq_desc for 18 on node 0 [ 0.797176] alloc kstat_irqs on node 0 [ 0.797182] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 0.797190] pci 0000:00:12.0: setting latency timer to 64 [ 0.797564] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17 [ 0.797566] alloc irq_desc for 17 on node 0 [ 0.797568] alloc kstat_irqs on node 0 [ 0.797574] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17 [ 0.797582] pci 0000:00:13.0: setting latency timer to 64 [ 0.797589] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.797591] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.797594] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.797596] pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xf9ffffff] [ 0.797599] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.797601] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.797603] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.797605] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfebfffff] [ 0.797608] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.797646] NET: Registered protocol family 2 [ 0.797806] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.798984] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.802264] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.802667] TCP: Hash tables configured (established 524288 bind 65536) [ 0.802670] TCP reno registered [ 0.802772] NET: Registered protocol family 1 [ 0.869857] pci 0000:00:07.0: Enabling HT MSI Mapping [ 0.869962] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.870072] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.870189] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.870377] pci 0000:02:00.0: Boot video device [ 0.870596] PCI-DMA: Disabling AGP. [ 0.870687] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.870689] PCI-DMA: using GART IOMMU. [ 0.870692] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.872456] Scanning for low memory corruption every 60 seconds [ 0.872573] audit: initializing netlink socket (disabled) [ 0.872584] type=2000 audit(1282862949.869:1): initialized [ 0.880793] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.881918] Freeing initrd memory: 8138k freed [ 0.882015] VFS: Disk quotas dquot_6.5.2 [ 0.882066] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.882656] fuse init (API version 7.13) [ 0.882730] msgmni has been set to 7913 [ 0.883054] alg: No test for stdrng (krng) [ 0.883112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.883116] io scheduler noop registered [ 0.883118] io scheduler anticipatory registered [ 0.883120] io scheduler deadline registered [ 0.883150] io scheduler cfq registered (default) [ 0.883531] alloc irq_desc for 24 on node 0 [ 0.883533] alloc kstat_irqs on node 0 [ 0.883557] pcieport 0000:00:10.0: irq 24 for MSI/MSI-X [ 0.883577] pcieport 0000:00:10.0: setting latency timer to 64 [ 0.884010] alloc irq_desc for 25 on node 0 [ 0.884011] alloc kstat_irqs on node 0 [ 0.884028] pcieport 0000:00:12.0: irq 25 for MSI/MSI-X [ 0.884047] pcieport 0000:00:12.0: setting latency timer to 64 [ 0.884448] alloc irq_desc for 26 on node 0 [ 0.884450] alloc kstat_irqs on node 0 [ 0.884466] pcieport 0000:00:13.0: irq 26 for MSI/MSI-X [ 0.884484] pcieport 0000:00:13.0: setting latency timer to 64 [ 0.884645] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.884668] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.884814] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.884819] ACPI: Power Button [PWRB] [ 0.884876] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.884878] ACPI: Power Button [PWRF] [ 0.885286] processor LNXCPU:00: registered as cooling_device0 [ 0.885314] processor LNXCPU:01: registered as cooling_device1 [ 0.885344] processor LNXCPU:02: registered as cooling_device2 [ 0.885373] processor LNXCPU:03: registered as cooling_device3 [ 0.894322] Linux agpgart interface v0.103 [ 0.894351] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.894452] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.894766] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.895691] brd: module loaded [ 0.896117] loop: module loaded [ 0.896188] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.896377] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.896844] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.896848] alloc irq_desc for 23 on node 0 [ 0.896849] alloc kstat_irqs on node 0 [ 0.896859] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.896875] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 0.896881] pata_acpi 0000:00:09.0: PCI INT A disabled [ 0.897190] Fixed MDIO Bus: probed [ 0.897219] PPP generic driver version 2.4.2 [ 0.897250] tun: Universal TUN/TAP device driver, 1.6 [ 0.897251] tun: (C) 1999-2004 Max Krasnyansky [ 0.897318] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.897744] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.897747] alloc irq_desc for 22 on node 0 [ 0.897748] alloc kstat_irqs on node 0 [ 0.897755] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.897773] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.897776] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.897807] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.897834] ehci_hcd 0000:00:02.1: debug port 1 [ 0.897842] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.897862] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9e7fc00 [ 0.909751] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.909819] usb usb1: configuration #1 chosen from 1 choice [ 0.909846] hub 1-0:1.0: USB hub found [ 0.909853] hub 1-0:1.0: 6 ports detected [ 0.910322] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 [ 0.910324] alloc irq_desc for 21 on node 0 [ 0.910326] alloc kstat_irqs on node 0 [ 0.910333] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21 [ 0.910342] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.910344] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.910370] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.910390] ehci_hcd 0000:00:04.1: debug port 1 [ 0.910397] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.910412] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf9e7f800 [ 0.929759] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.929817] usb usb2: configuration #1 chosen from 1 choice [ 0.929838] hub 2-0:1.0: USB hub found [ 0.929844] hub 2-0:1.0: 6 ports detected [ 0.929896] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.930315] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 0.930322] alloc irq_desc for 20 on node 0 [ 0.930323] alloc kstat_irqs on node 0 [ 0.930330] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 0.930339] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.930341] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.930373] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.930396] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf9e7e000 [ 0.991819] usb usb3: configuration #1 chosen from 1 choice [ 0.991843] hub 3-0:1.0: USB hub found [ 0.991849] hub 3-0:1.0: 6 ports detected [ 0.992302] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23 [ 0.992305] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23 [ 0.992314] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.992316] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.992342] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.992364] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf9e7d000 [ 1.051827] usb usb4: configuration #1 chosen from 1 choice [ 1.051851] hub 4-0:1.0: USB hub found [ 1.051858] hub 4-0:1.0: 6 ports detected [ 1.051910] uhci_hcd: USB Universal Host Controller Interface driver [ 1.051970] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.051972] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.052115] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.052182] mice: PS/2 mouse device common for all mice [ 1.052273] rtc_cmos 00:08: RTC can wake from S4 [ 1.052301] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.052357] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.052468] device-mapper: uevent: version 1.0.3 [ 1.052561] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.052665] device-mapper: multipath: version 1.1.0 loaded [ 1.052668] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.052900] cpuidle: using governor ladder [ 1.052902] cpuidle: using governor menu [ 1.053246] TCP cubic registered [ 1.053371] NET: Registered protocol family 10 [ 1.053828] lo: Disabled Privacy Extensions [ 1.054117] NET: Registered protocol family 17 [ 1.054149] powernow-k8: Found 1 AMD Phenom(tm) 9550 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) [ 1.054179] powernow-k8: 0 : pstate 0 (2200 MHz) [ 1.054181] powernow-k8: 1 : pstate 1 (1100 MHz) [ 1.054525] PM: Resume from disk failed. [ 1.054537] registered taskstats version 1 [ 1.055054] Magic number: 6:90:857 [ 1.055171] rtc_cmos 00:08: setting system clock to 2010-08-26 22:49:10 UTC (1282862950) [ 1.055174] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.055176] EDD information not available. [ 1.055224] Freeing unused kernel memory: 880k freed [ 1.055516] Write protecting the kernel read-only data: 7696k [ 1.070205] udev: starting version 151 [ 1.075746] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.093436] pata_amd 0000:00:06.0: version 0.4.1 [ 1.093482] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.099827] scsi0 : pata_amd [ 1.116807] scsi1 : pata_amd [ 1.118182] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.118185] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.119944] Floppy drive(s): fd0 is 1.44M [ 1.122570] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 16 [ 1.122576] alloc irq_desc for 16 on node 0 [ 1.122578] alloc kstat_irqs on node 0 [ 1.122589] aic7xxx 0000:01:08.0: PCI INT A -> Link[LNKC] -> GSI 16 (level, low) -> IRQ 16 [ 1.123712] ahc_pci:1:8:0: Host Adapter Bios disabled. Using default SCSI device parameters [ 1.124808] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.125205] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 1.125209] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 1.125212] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.147608] FDC 0 is a post-1991 82077 [ 1.201362] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:22:15:b9:87:3f [ 1.201366] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 1.201485] ahci 0000:00:09.0: version 3.0 [ 1.201494] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.201529] alloc irq_desc for 27 on node 0 [ 1.201531] alloc kstat_irqs on node 0 [ 1.201538] ahci 0000:00:09.0: irq 27 for MSI/MSI-X [ 1.201603] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 1.201607] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh [ 1.201610] ahci 0000:00:09.0: setting latency timer to 64 [ 1.202012] scsi3 : ahci [ 1.202093] scsi4 : ahci [ 1.202149] scsi5 : ahci [ 1.202202] scsi6 : ahci [ 1.202258] scsi7 : ahci [ 1.202311] scsi8 : ahci [ 1.202463] ata3: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76100 irq 27 [ 1.202466] ata4: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76180 irq 27 [ 1.202468] ata5: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76200 irq 27 [ 1.202470] ata6: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76280 irq 27 [ 1.202473] ata7: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76300 irq 27 [ 1.202475] ata8: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76380 irq 27 [ 1.310338] ata1.00: ATAPI: PIONEER DVD-RW DVR-116D, 1.06, max UDMA/66 [ 1.340567] ata1.01: ATA-7: MAXTOR STM3160215A, 3.AAD, max UDMA/100 [ 1.340570] ata1.01: 312581808 sectors, multi 16: LBA48 [ 1.340596] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c60000) ACPI=0x1f01f (30:20:0x15) [ 1.340601] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc5c60000) ACPI=0x3f01f (30:20:0x15) [ 1.380274] ata1.00: configured for UDMA/66 [ 1.448735] ata1.01: configured for UDMA/100 [ 1.491285] usb 3-4: new low speed USB device using ohci_hcd and address 2 [ 1.511618] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-116D 1.06 PQ: 0 ANSI: 5 [ 1.550033] ata6: SATA link down (SStatus 0 SControl 300) [ 1.550047] ata4: SATA link down (SStatus 0 SControl 300) [ 1.550059] ata7: SATA link down (SStatus 0 SControl 300) [ 1.550067] ata8: SATA link down (SStatus 0 SControl 300) [ 1.634907] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.634910] Uniform CD-ROM driver Revision: 3.20 [ 1.635003] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.635063] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.635153] scsi 0:0:1:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5 [ 1.635274] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.635335] sd 0:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.635355] ata2: port disabled. ignoring. [ 1.635388] sd 0:0:1:0: [sda] Write Protect is off [ 1.635391] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.635410] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.635546] sda: sda1 sda2 sda3 sda4 [ 1.654926] sd 0:0:1:0: [sda] Attached SCSI disk [ 1.730022] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.730032] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.730820] ata3.00: ATA-8: WDC WD3200AAKS-75B3A0, 01.03A01, max UDMA/133 [ 1.730822] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.730841] ata5.00: ATA-8: WDC WD3200AAKS-75B3A0, 01.03A01, max UDMA/133 [ 1.730844] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.731713] ata3.00: configured for UDMA/133 [ 1.731766] ata5.00: configured for UDMA/133 [ 1.731772] scsi 3:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 01.0 PQ: 0 ANSI: 5 [ 1.731920] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.731931] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.731955] sd 3:0:0:0: [sdb] Write Protect is off [ 1.731958] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.731986] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.732078] scsi 5:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 01.0 PQ: 0 ANSI: 5 [ 1.732109] sdb: [ 1.732199] sd 5:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.732232] sd 5:0:0:0: [sdc] Write Protect is off [ 1.732234] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.732237] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 1.732257] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.732391] sdc: sdc1 sdc2 sdc3 sdc4 < [ 1.738906] usb 3-4: configuration #1 chosen from 1 choice [ 1.739547] sdb1 sdb2 sdb3 sdb4 [ 1.739777] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.752312] sdc5 sdc6 sdc7 > [ 1.785659] sd 5:0:0:0: [sdc] Attached SCSI disk [ 1.789483] usbcore: registered new interface driver hiddev [ 1.796101] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/input/input4 [ 1.796187] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-4/input0 [ 1.796215] usbcore: registered new interface driver usbhid [ 1.796217] usbhid: v2.6:USB HID core driver [ 2.239919] EXT4-fs (sdc3): INFO: recovery required on readonly filesystem [ 2.239923] EXT4-fs (sdc3): write access will be enabled during recovery [ 3.956374] EXT4-fs (sdc3): orphan cleanup on readonly fs [ 3.956384] EXT4-fs (sdc3): ext4_orphan_cleanup: deleting unreferenced inode 3801143 [ 3.956443] EXT4-fs (sdc3): 1 orphan inode deleted [ 3.956446] EXT4-fs (sdc3): recovery complete [ 4.278893] EXT4-fs (sdc3): mounted filesystem with ordered data mode [ 5.797505] Adding 2096440k swap on /dev/sdc1. Priority:-1 extents:1 across:2096440k [ 6.022410] udev: starting version 151 [ 6.643611] type=1505 audit(1282855756.086:2): operation="profile_load" pid=603 name="/sbin/dhclient3" [ 6.643872] type=1505 audit(1282855756.086:3): operation="profile_load" pid=603 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 6.644022] type=1505 audit(1282855756.086:4): operation="profile_load" pid=603 name="/usr/lib/connman/scripts/dhclient-script" [ 7.000890] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 7.000898] ACPI: resource nForce2_smbus [0x700-0x73f] conflicts with ACPI region SM00 [0x700-0x73f] [ 7.000901] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.000903] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 7.030598] EDAC MC: Ver: 2.1.0 Aug 19 2010 [ 7.072339] EDAC amd64_edac: Ver: 3.2.0 Aug 19 2010 [ 7.072417] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 7.072427] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 7.072429] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 7.072430] (Note that use of the override may cause unknown side effects.) [ 7.072453] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 7.095981] vga16fb: initializing [ 7.095985] vga16fb: mapped to 0xffff8800000a0000 [ 7.096190] fb0: VGA16 VGA frame buffer device [ 7.106011] parport_pc 00:05: reported by Plug and Play ACPI [ 7.106079] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 7.120419] lp: driver loaded but no devices found [ 7.124085] ppdev: user-space parallel port driver [ 7.180203] lp0: using parport0 (interrupt-driven). [ 7.443629] nvidia: module license 'NVIDIA' taints kernel. [ 7.443635] Disabling lock debugging due to kernel taint [ 8.094781] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 8.094791] nvidia 0000:02:00.0: setting latency timer to 64 [ 8.094795] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 8.094964] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010 [ 8.108594] Console: switching to colour frame buffer device 80x30 [ 8.705015] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 8.705058] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 8.705482] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 8.705487] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 8.705490] hda_intel: Disable MSI for Nvidia chipset [ 8.705532] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 10.078617] EXT4-fs (sdc6): mounted filesystem with ordered data mode [ 10.564384] EXT4-fs (sdc2): mounted filesystem with ordered data mode [ 10.639182] EXT4-fs (sdc5): mounted filesystem with ordered data mode [ 10.719587] EXT4-fs (sdc7): mounted filesystem with ordered data mode [ 12.498476] alloc irq_desc for 28 on node 0 [ 12.498480] alloc kstat_irqs on node 0 [ 12.498489] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X [ 12.507521] type=1505 audit(1282855761.944:5): operation="profile_load" pid=987 name="/usr/share/gdm/guest-session/Xsession" [ 12.508947] type=1505 audit(1282855761.944:6): operation="profile_replace" pid=993 name="/sbin/dhclient3" [ 12.509214] type=1505 audit(1282855761.944:7): operation="profile_replace" pid=993 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.509363] type=1505 audit(1282855761.944:8): operation="profile_replace" pid=993 name="/usr/lib/connman/scripts/dhclient-script" [ 12.532415] type=1505 audit(1282855761.974:9): operation="profile_load" pid=994 name="/usr/bin/evince" [ 12.535861] type=1505 audit(1282855761.974:10): operation="profile_load" pid=994 name="/usr/bin/evince-previewer" [ 12.537876] type=1505 audit(1282855761.974:11): operation="profile_load" pid=994 name="/usr/bin/evince-thumbnailer" [ 12.744080] type=1505 audit(1282855762.184:12): operation="profile_load" pid=996 name="/usr/lib/cups/backend/cups-pdf" [ 12.744400] type=1505 audit(1282855762.184:13): operation="profile_load" pid=996 name="/usr/sbin/cupsd" [ 12.785221] type=1505 audit(1282855762.224:14): operation="profile_load" pid=1000 name="/usr/sbin/mysqld" [ 16.130031] scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 16.130032] [ 16.130033] aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs [ 16.130035] [ 16.397426] scsi 2:0:1:0: CD-ROM TEAC CD-ROM CD-532S 3.0A PQ: 0 ANSI: 2 [ 16.397438] scsi target2:0:1: Beginning Domain Validation [ 16.399720] scsi target2:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) [ 16.401245] scsi target2:0:1: Domain Validation skipping write tests [ 16.401247] scsi target2:0:1: Ending Domain Validation [ 16.407430] scsi 2:0:2:0: CD-ROM PIONEER DVD-ROM DVD-303 1.09 PQ: 0 ANSI: 2 [ 16.407436] scsi target2:0:2: Beginning Domain Validation [ 16.411280] scsi target2:0:2: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8) [ 16.413800] scsi target2:0:2: Domain Validation skipping write tests [ 16.413803] scsi target2:0:2: Ending Domain Validation [ 17.469516] sr1: scsi3-mmc drive: 0x/0x caddy [ 17.469636] sr 2:0:1:0: Attached scsi CD-ROM sr1 [ 17.469727] sr 2:0:1:0: Attached scsi generic sg4 type 5 [ 17.478304] sr2: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray [ 17.478433] sr 2:0:2:0: Attached scsi CD-ROM sr2 [ 17.478513] sr 2:0:2:0: Attached scsi generic sg5 type 5 [ 22.501272] eth0: no IPv6 routers present [ 45.467310] __ratelimit: 6 callbacks suppressed [ 45.467313] type=1505 audit(1282855794.904:17): operation="profile_replace" pid=1782 name="/usr/sbin/mysqld" [ 75.602801] type=1505 audit(1282855825.044:18): operation="profile_replace" pid=1861 name="/usr/sbin/mysqld" [ 105.827910] type=1505 audit(1282855855.268:19): operation="profile_replace" pid=1940 name="/usr/sbin/mysqld" [ 136.062376] type=1505 audit(1282855885.504:20): operation="profile_replace" pid=2220 name="/usr/sbin/mysqld" [ 166.315177] type=1505 audit(1282855915.757:21): operation="profile_replace" pid=2518 name="/usr/sbin/mysqld" [ 196.589137] type=1505 audit(1282855946.028:22): operation="profile_replace" pid=2621 name="/usr/sbin/mysqld" [ 226.854085] type=1505 audit(1282855976.294:23): operation="profile_replace" pid=2714 name="/usr/sbin/mysqld" [ 257.105573] type=1505 audit(1282856006.546:24): operation="profile_replace" pid=2832 name="/usr/sbin/mysqld" [ 287.361944] type=1505 audit(1282856036.804:25): operation="profile_replace" pid=2939 name="/usr/sbin/mysqld" [ 317.615164] type=1505 audit(1282856067.054:26): operation="profile_replace" pid=3157 name="/usr/sbin/mysqld"