[ 0.000000] microcode: CPU0 microcode updated early to revision 0x2b, date = 2018-03-22 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-135-generic (buildd@lcy01-amd64-020) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10) ) #161-Ubuntu SMP Mon Aug 27 10:45:01 UTC 2018 (Ubuntu 4.4.0-135.161-generic 4.4.140) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-135-generic root=UUID=0cb2165d-5d1a-4855-a5de-5778554c4efb ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x000000001000afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000001000b000-0x00000000beccefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000beccf000-0x00000000ccdfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ccdff000-0x00000000ccf7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ccf7f000-0x00000000ccffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ff000fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20DSA0E8IG/Intel powered classmate PC, BIOS JDET55WW (1.17 ) 11/20/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FF0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00CE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00CD000000 mask 7FFF000000 uncachable [ 0.000000] 4 base 00F0000000 mask 7FF0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xbeccf max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02218000, 0x02218fff] PGTABLE [ 0.000000] BRK [0x02219000, 0x02219fff] PGTABLE [ 0.000000] BRK [0x0221a000, 0x0221afff] PGTABLE [ 0.000000] BRK [0x0221b000, 0x0221bfff] PGTABLE [ 0.000000] BRK [0x0221c000, 0x0221cfff] PGTABLE [ 0.000000] BRK [0x0221d000, 0x0221dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33394000-0x359c1fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000CCFFE1C0 0000EC (v01 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000CCFF8000 00010C (v05 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000CCFE2000 01117B (v01 LENOVO TP-JD 00001170 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000CCF68000 000040 [ 0.000000] ACPI: SLIC 0x00000000CCFFD000 000176 (v01 LENOVO TP-JD 00001170 PTEC 00000001) [ 0.000000] ACPI: ASF! 0x00000000CCFFC000 0000A5 (v32 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000CCFFB000 000038 (v01 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: ECDT 0x00000000CCFFA000 000052 (v01 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000CCFF7000 000098 (v01 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000CCFF6000 00003C (v01 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000CCFF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCFF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCFE1000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCFE0000 00062A (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCFDF000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCFDE000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCFDC000 001477 (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCFDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.000000] ACPI: PCCT 0x00000000CCFDA000 00006E (v05 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000CCFD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.000000] ACPI: TCPA 0x00000000CCFD8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000CCFD7000 0006A3 (v01 Intel_ TpmTable 00001000 INTL 20120711) [ 0.000000] ACPI: UEFI 0x00000000CCFD6000 000042 (v01 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: MSDM 0x00000000CCEB1000 000055 (v03 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000CCFD5000 000046 (v01 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000CCFD4000 000064 (v01 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000CCFD3000 0002E2 (v01 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: DMAR 0x00000000CCFD2000 0000B0 (v01 LENOVO TP-JD 00001170 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x42effa000-0x42effefff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000042effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x000000001000b000-0x00000000beccefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000042effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042effffff] [ 0.000000] On node 0 totalpages: 4119648 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12148 pages used for memmap [ 0.000000] DMA32 zone: 777412 pages, LIFO batch:31 [ 0.000000] Normal zone: 52160 pages used for memmap [ 0.000000] Normal zone: 3338240 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xce000000-0xcfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x10000000-0x1000afff] [ 0.000000] PM: Registered nosave memory: [mem 0xbeccf000-0xccdfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xccdff000-0xccf7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xccf7f000-0xccffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xccfff000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xff000fff] [ 0.000000] PM: Registered nosave memory: [mem 0xff001000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88042ec00000 s99544 r8192 d31528 u262144 [ 0.000000] pcpu-alloc: s99544 r8192 d31528 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4055254 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-135-generic root=UUID=0cb2165d-5d1a-4855-a5de-5778554c4efb ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16095392K/16478592K available (8554K kernel code, 1314K rwdata, 4004K rodata, 1516K init, 1316K bss, 383200K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:760 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.934 MHz processor [ 0.000086] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.86 BogoMIPS (lpj=8779736) [ 0.000093] pid_max: default: 32768 minimum: 301 [ 0.000106] ACPI: Core revision 20150930 [ 0.057737] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.057791] Security Framework initialized [ 0.057795] Yama: becoming mindful. [ 0.057830] AppArmor: AppArmor initialized [ 0.060594] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.069147] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.073267] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.073314] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.073875] Initializing cgroup subsys io [ 0.073883] Initializing cgroup subsys memory [ 0.073897] Initializing cgroup subsys devices [ 0.073902] Initializing cgroup subsys freezer [ 0.073907] Initializing cgroup subsys net_cls [ 0.073912] Initializing cgroup subsys perf_event [ 0.073917] Initializing cgroup subsys net_prio [ 0.073925] Initializing cgroup subsys hugetlb [ 0.073929] Initializing cgroup subsys pids [ 0.073978] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.073981] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.076102] mce: CPU supports 7 MCE banks [ 0.076133] CPU0: Thermal monitoring enabled (TM1) [ 0.076154] process: using mwait in idle threads [ 0.076161] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.076164] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.076170] Spectre V2 : Mitigation: Full generic retpoline [ 0.076172] Spectre V2 : Enabling Indirect Branch Prediction Barrier [ 0.076175] Spectre V2 : Enabling Indirect Branch Restricted Speculation [ 0.076178] Spectre V2 : Speculation control IBPB supported IBRS supported [ 0.076181] Spectre V2 : Retpoline compiled kernel. Defaulting IBRS to disabled [ 0.076186] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.077296] Freeing SMP alternatives memory: 32K [ 0.086312] ftrace: allocating 32266 entries in 127 pages [ 0.165157] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.165163] smpboot: Max logical packages: 4 [ 0.165188] DMAR: Host address width 39 [ 0.165193] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.165208] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.165212] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.165226] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.165231] DMAR: RMRR base: 0x000000cb1b9000 end: 0x000000cb1cffff [ 0.165235] DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff [ 0.165241] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.165245] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.165248] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.165251] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.166184] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.166187] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.166915] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.206619] TSC deadline timer enabled [ 0.206626] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.206670] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [ 0.206725] ... version: 3 [ 0.206728] ... bit width: 48 [ 0.206731] ... generic registers: 4 [ 0.206734] ... value mask: 0000ffffffffffff [ 0.206738] ... max period: 00007fffffffffff [ 0.206741] ... fixed-purpose events: 3 [ 0.206744] ... event mask: 000000070000000f [ 0.208926] x86: Booting SMP configuration: [ 0.208931] .... node #0, CPUs: #1 [ 0.214428] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.214599] #2 [ 0.218437] microcode: CPU2 microcode updated early to revision 0x2b, date = 2018-03-22 [ 0.222914] #3 [ 0.228115] x86: Booted up 1 node, 4 CPUs [ 0.228122] smpboot: Total of 4 processors activated (17559.47 BogoMIPS) [ 0.238040] devtmpfs: initialized [ 0.245824] evm: security.selinux [ 0.245828] evm: security.SMACK64 [ 0.245831] evm: security.SMACK64EXEC [ 0.245834] evm: security.SMACK64TRANSMUTE [ 0.245838] evm: security.SMACK64MMAP [ 0.245841] evm: security.ima [ 0.245844] evm: security.capability [ 0.246002] PM: Registering ACPI NVS region [mem 0xccdff000-0xccf7efff] (1572864 bytes) [ 0.246243] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.246281] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.246583] pinctrl core: initialized pinctrl subsystem [ 0.246865] RTC time: 5:18:21, date: 09/17/18 [ 0.247227] NET: Registered protocol family 16 [ 0.261477] cpuidle: using governor ladder [ 0.277492] cpuidle: using governor menu [ 0.277521] Error parsing PCC subspaces from PCCT [ 0.277705] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.277710] ACPI: bus type PCI registered [ 0.277714] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.278119] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.278126] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.278140] PCI: Using configuration type 1 for base access [ 0.294507] ACPI: Added _OSI(Module Device) [ 0.294513] ACPI: Added _OSI(Processor Device) [ 0.294517] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.294521] ACPI: Added _OSI(Processor Aggregator Device) [ 0.300482] ACPI : EC: EC description table is found, configuring boot EC [ 0.300503] ACPI : EC: EC started [ 0.316589] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.332595] ACPI: Dynamic OEM Table Load: [ 0.332622] ACPI: SSDT 0xFFFF88041C308800 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.334879] ACPI: Dynamic OEM Table Load: [ 0.334903] ACPI: SSDT 0xFFFF88041C309000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.337238] ACPI: Dynamic OEM Table Load: [ 0.337256] ACPI: SSDT 0xFFFF88041C2E0E00 000119 (v02 PmRef ApCst 00003000 INTL 20120711) [ 0.340599] ACPI: Interpreter enabled [ 0.340689] ACPI: (supports S0 S3 S4 S5) [ 0.340693] ACPI: Using IOAPIC for interrupt routing [ 0.340767] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.351204] ACPI: Power Resource [PUBS] (off) [ 0.353530] ACPI: Power Resource [AMD3] (on) [ 0.353623] ACPI: Power Resource [AMD2] (on) [ 0.365522] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.365748] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11) [ 0.365942] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) [ 0.366132] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11) [ 0.366322] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11) [ 0.366468] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.366660] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.366849] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11) [ 0.367090] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.367104] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.367396] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.367527] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.367535] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.367542] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.367548] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.367940] PCI host bridge to bus 0000:00 [ 0.367949] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.367957] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.367964] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.367970] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 0.367976] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.367983] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.368005] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.368215] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.368255] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit] [ 0.368274] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.368289] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.368483] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.368518] pci 0000:00:03.0: reg 0x10: [mem 0xf1230000-0xf1233fff 64bit] [ 0.368753] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.368798] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit] [ 0.368890] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.368967] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.369061] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.369107] pci 0000:00:16.0: reg 0x10: [mem 0xf1239000-0xf123901f 64bit] [ 0.369200] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.369362] pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000 [ 0.369405] pci 0000:00:19.0: reg 0x10: [mem 0xf1200000-0xf121ffff] [ 0.369421] pci 0000:00:19.0: reg 0x14: [mem 0xf123e000-0xf123efff] [ 0.369439] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.369524] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.369598] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.369709] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.369755] pci 0000:00:1b.0: reg 0x10: [mem 0xf1234000-0xf1237fff 64bit] [ 0.369847] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.370003] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.370120] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.370391] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400 [ 0.370513] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.370677] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.370774] pci 0000:00:1c.5: [8086:9c9a] type 01 class 0x060400 [ 0.370888] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.371135] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.371183] pci 0000:00:1d.0: reg 0x10: [mem 0xf123d000-0xf123d3ff] [ 0.371304] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.371380] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.371474] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.371773] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.371813] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.371829] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.371845] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.371861] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.371876] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.371892] pci 0000:00:1f.2: reg 0x24: [mem 0xf123c000-0xf123c7ff] [ 0.371946] pci 0000:00:1f.2: PME# supported from D3hot [ 0.372098] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.372128] pci 0000:00:1f.3: reg 0x10: [mem 0xf1238000-0xf12380ff 64bit] [ 0.372165] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.372343] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.372407] pci 0000:00:1f.6: reg 0x10: [mem 0xf123b000-0xf123bfff 64bit] [ 0.372732] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.373102] pci 0000:04:00.0: [8086:095b] type 00 class 0x028000 [ 0.373677] pci 0000:04:00.0: reg 0x10: [mem 0xf1100000-0xf1101fff 64bit] [ 0.375216] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.381953] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.381966] pci 0000:00:1c.2: bridge window [mem 0xf1100000-0xf11fffff] [ 0.382128] pci 0000:05:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.382271] pci 0000:05:00.0: reg 0x10: [mem 0xf1000000-0xf1000fff] [ 0.382698] pci 0000:05:00.0: supports D1 D2 [ 0.382704] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.389734] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.389746] pci 0000:00:1c.5: bridge window [mem 0xf1000000-0xf10fffff] [ 0.392365] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.392580] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62 [ 0.392847] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.392854] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.392862] vgaarb: loaded [ 0.392866] vgaarb: bridge control possible 0000:00:02.0 [ 0.393464] SCSI subsystem initialized [ 0.393565] libata version 3.00 loaded. [ 0.393621] ACPI: bus type USB registered [ 0.393669] usbcore: registered new interface driver usbfs [ 0.393705] usbcore: registered new interface driver hub [ 0.393753] usbcore: registered new device driver usb [ 0.394168] PCI: Using ACPI for IRQ routing [ 0.396418] PCI: pci_cache_line_size set to 64 bytes [ 0.396791] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.396797] e820: reserve RAM buffer [mem 0xbeccf000-0xbfffffff] [ 0.396801] e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff] [ 0.397081] NetLabel: Initializing [ 0.397085] NetLabel: domain hash size = 128 [ 0.397088] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.397115] NetLabel: unlabeled traffic allowed by default [ 0.397282] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.397299] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.399329] amd_nb: Cannot enumerate AMD northbridges [ 0.399362] clocksource: Switched to clocksource hpet [ 0.414075] AppArmor: AppArmor Filesystem Enabled [ 0.414226] pnp: PnP ACPI init [ 0.415249] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.415259] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.415266] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.415272] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.415278] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.415285] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.415291] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.415298] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.415304] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.415310] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.415317] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.415323] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.415329] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.415336] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.415343] system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.415350] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.415356] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.415383] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.415617] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.415676] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.415684] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.415690] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.415697] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.415703] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.415710] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.415716] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.415723] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.415729] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.415736] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.415744] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.415751] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.415758] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.415765] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.415771] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.415778] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.415787] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.415941] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.416004] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.416059] pnp 00:04: Plug and Play ACPI device, IDs LEN200a PNP0f13 (active) [ 0.416747] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.417288] system 00:06: [mem 0xd0010000-0xd001ffff] has been reserved [ 0.417296] system 00:06: [mem 0xd0000000-0xd000ffff] has been reserved [ 0.417306] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.417380] pnp: PnP ACPI: found 7 devices [ 0.425907] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.425970] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.425993] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.426004] pci 0000:00:1c.2: bridge window [mem 0xf1100000-0xf11fffff] [ 0.426020] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.426030] pci 0000:00:1c.5: bridge window [mem 0xf1000000-0xf10fffff] [ 0.426049] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.426055] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.426062] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.426068] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff window] [ 0.426074] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window] [ 0.426080] pci_bus 0000:04: resource 1 [mem 0xf1100000-0xf11fffff] [ 0.426086] pci_bus 0000:05: resource 1 [mem 0xf1000000-0xf10fffff] [ 0.426160] NET: Registered protocol family 2 [ 0.426604] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.427106] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.427376] TCP: Hash tables configured (established 131072 bind 65536) [ 0.427453] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.427574] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.427769] NET: Registered protocol family 1 [ 0.427808] pci 0000:00:02.0: Video device with shadowed ROM [ 0.428652] PCI: CLS 64 bytes, default 64 [ 0.428764] Unpacking initramfs... [ 2.071665] Freeing initrd memory: 39096K [ 2.071762] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.071773] software IO TLB [mem 0xbaccf000-0xbeccf000] (64MB) mapped at [ffff8800baccf000-ffff8800beccefff] [ 2.071946] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 2.071951] hw unit of domain pp0-core 2^-14 Joules [ 2.071954] hw unit of domain package 2^-14 Joules [ 2.071958] hw unit of domain dram 2^-14 Joules [ 2.071961] hw unit of domain pp1-gpu 2^-14 Joules [ 2.072312] Scanning for low memory corruption every 60 seconds [ 2.073194] audit: initializing netlink subsys (disabled) [ 2.073233] audit: type=2000 audit(1537161503.048:1): initialized [ 2.074456] Initialise system trusted keyring [ 2.074707] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 2.074714] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.078342] zbud: loaded [ 2.079313] VFS: Disk quotas dquot_6.6.0 [ 2.079407] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.080039] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.080640] fuse init (API version 7.23) [ 2.081012] Key type big_key registered [ 2.081086] Allocating IMA MOK and blacklist keyrings. [ 2.081885] Key type asymmetric registered [ 2.081892] Asymmetric key parser 'x509' registered [ 2.081980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.082051] io scheduler noop registered [ 2.082061] io scheduler deadline registered (default) [ 2.082139] io scheduler cfq registered [ 2.083061] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.083080] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.083161] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 2.083164] vesafb: scrolling: redraw [ 2.083170] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.083196] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 4160k, total 4160k [ 2.083434] Console: switching to colour frame buffer device 170x48 [ 2.083478] fb0: VESA VGA frame buffer device [ 2.083526] intel_idle: MWAIT substates: 0x11142120 [ 2.083530] intel_idle: v0.4.1 model 0x3D [ 2.083534] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.084799] ACPI: AC Adapter [AC] (off-line) [ 2.084947] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.085607] ACPI: Lid Switch [LID] [ 2.085704] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.085713] ACPI: Sleep Button [SLPB] [ 2.085824] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.085830] ACPI: Power Button [PWRF] [ 2.093367] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.093376] ACPI: Thermal Zone [THM0] (36 C) [ 2.093496] GHES: HEST is not enabled! [ 2.093790] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.097971] Linux agpgart interface v0.103 [ 2.107431] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 2.140250] ACPI: Battery Slot [BAT0] (battery present) [ 2.161655] loop: module loaded [ 2.162158] libphy: Fixed MDIO Bus: probed [ 2.162168] tun: Universal TUN/TAP device driver, 1.6 [ 2.162172] tun: (C) 1999-2004 Max Krasnyansky [ 2.162290] PPP generic driver version 2.4.2 [ 2.162435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.162447] ehci-pci: EHCI PCI platform driver [ 2.162695] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.162711] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.162732] ehci-pci 0000:00:1d.0: debug port 2 [ 2.166640] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.166674] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf123d000 [ 2.175398] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.175486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.175493] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.175499] usb usb1: Product: EHCI Host Controller [ 2.175505] usb usb1: Manufacturer: Linux 4.4.0-135-generic ehci_hcd [ 2.175510] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.175864] hub 1-0:1.0: USB hub found [ 2.175881] hub 1-0:1.0: 3 ports detected [ 2.176494] ehci-platform: EHCI generic platform driver [ 2.176531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.176545] ohci-pci: OHCI PCI platform driver [ 2.176573] ohci-platform: OHCI generic platform driver [ 2.176596] uhci_hcd: USB Universal Host Controller Interface driver [ 2.176833] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.176848] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.177958] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 2.177969] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.178126] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.178133] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.178138] usb usb2: Product: xHCI Host Controller [ 2.178144] usb usb2: Manufacturer: Linux 4.4.0-135-generic xhci-hcd [ 2.178149] usb usb2: SerialNumber: 0000:00:14.0 [ 2.178425] hub 2-0:1.0: USB hub found [ 2.178447] hub 2-0:1.0: 11 ports detected [ 2.180552] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.180566] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.180634] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.180640] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.180646] usb usb3: Product: xHCI Host Controller [ 2.180651] usb usb3: Manufacturer: Linux 4.4.0-135-generic xhci-hcd [ 2.180656] usb usb3: SerialNumber: 0000:00:14.0 [ 2.180926] hub 3-0:1.0: USB hub found [ 2.180942] hub 3-0:1.0: 4 ports detected [ 2.182121] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.190670] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.190682] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.191088] mousedev: PS/2 mouse device common for all mice [ 2.191599] rtc_cmos 00:02: RTC can wake from S4 [ 2.191844] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.191891] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.191914] i2c /dev entries driver [ 2.192048] device-mapper: uevent: version 1.0.3 [ 2.192215] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.192269] Intel P-state driver initializing. [ 2.192548] ledtrig-cpu: registered to indicate activity on CPUs [ 2.193562] NET: Registered protocol family 10 [ 2.194009] NET: Registered protocol family 17 [ 2.194039] Key type dns_resolver registered [ 2.194564] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x2b [ 2.194586] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x2b [ 2.194600] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x2b [ 2.194621] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x2b [ 2.194733] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 2.195120] registered taskstats version 1 [ 2.195157] Loading compiled-in X.509 certificates [ 2.197386] Loaded X.509 cert 'Build time autogenerated kernel key: b7189ebc996fd79c52efc1226b6676b25e4f6a2d' [ 2.197442] zswap: loaded using pool lzo/zbud [ 2.199405] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.201855] Key type trusted registered [ 2.206673] Key type encrypted registered [ 2.206682] AppArmor: AppArmor sha1 policy hashing enabled [ 2.227494] ima: Allocated hash algorithm: sha1 [ 2.335451] evm: HMAC attrs: 0x1 [ 2.335995] Magic number: 2:96:315 [ 2.336020] tty tty40: hash matches [ 2.336100] rtc_cmos 00:02: setting system clock to 2018-09-17 05:18:23 UTC (1537161503) [ 2.336176] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.336177] EDD information not available. [ 2.336251] PM: Hibernation image not present or could not be loaded. [ 2.337369] Freeing unused kernel memory: 1516K [ 2.347351] Write protecting the kernel read-only data: 14336k [ 2.347795] Freeing unused kernel memory: 1672K [ 2.348046] Freeing unused kernel memory: 92K [ 2.359480] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 2.359558] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 2.359570] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 2.359861] random: udevadm: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 2.359884] random: udevadm: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 2.364808] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 2.364827] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 2.364836] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 2.365048] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 2.365071] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 2.395666] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 2.404841] wmi: Mapper loaded [ 2.407060] pps_core: LinuxPPS API ver. 1 registered [ 2.407062] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.408226] PTP clock support registered [ 2.410159] rtsx_pci 0000:05:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43 [ 2.411984] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.411986] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.412107] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.414128] [drm] Initialized drm 1.1.0 20060810 [ 2.487403] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.491401] usb 2-6: new high-speed USB device number 2 using xhci_hcd [ 2.619738] usb 1-1: New USB device found, idVendor=8087, idProduct=8001 [ 2.619741] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.620024] hub 1-1:1.0: USB hub found [ 2.620110] hub 1-1:1.0: 8 ports detected [ 2.620963] usb 2-6: New USB device found, idVendor=05e3, idProduct=0608 [ 2.620966] usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.620968] usb 2-6: Product: USB2.0 Hub [ 2.621472] hub 2-6:1.0: USB hub found [ 2.621742] hub 2-6:1.0: 2 ports detected [ 2.701614] e1000e 0000:00:19.0 eth0: registered PHC clock [ 2.701618] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:54:81:00 [ 2.701621] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.701645] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 2.701676] ahci 0000:00:1f.2: version 3.0 [ 2.702339] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 2.715411] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode [ 2.715416] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 2.715942] scsi host0: ahci [ 2.716094] scsi host1: ahci [ 2.716236] scsi host2: ahci [ 2.716295] ata1: SATA max UDMA/133 abar m2048@0xf123c000 port 0xf123c100 irq 45 [ 2.716297] ata2: DUMMY [ 2.716299] ata3: DUMMY [ 2.716841] [drm] Memory usable by graphics device = 4096M [ 2.716844] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 2.716846] fb: switching to inteldrmfb from VESA VGA [ 2.716878] Console: switching to colour dummy device 80x25 [ 2.716932] [drm] Replacing VGA console driver [ 2.723156] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.723158] [drm] Driver supports precise vblank timestamp query. [ 2.723584] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.752747] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 2.783742] fbcon: inteldrmfb (fb0) is primary device [ 2.783819] Console: switching to colour frame buffer device 170x48 [ 2.783842] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.784639] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.787361] usb 2-7: new full-speed USB device number 3 using xhci_hcd [ 2.803180] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* failed to train DP, aborting [ 2.916990] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a [ 2.916993] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.987393] usb 2-6.1: new full-speed USB device number 4 using xhci_hcd [ 3.035414] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.039743] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3.039748] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.042360] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 3.050637] ata1.00: ATA-9: SanDisk SDSSDA240G, Z32070RL, max UDMA/133 [ 3.050641] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.061862] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3.061867] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.064525] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 3.071386] tsc: Refined TSC clocksource calibration: 2194.915 MHz [ 3.071390] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa36f134b6, max_idle_ns: 440795231313 ns [ 3.075654] ata1.00: configured for UDMA/133 [ 3.075905] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDA24 70RL PQ: 0 ANSI: 5 [ 3.076244] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.076288] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.076329] sd 0:0:0:0: [sda] Write Protect is off [ 3.076333] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.076355] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.076705] usb 2-6.1: New USB device found, idVendor=138a, idProduct=0011 [ 3.076708] usb 2-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.076710] usb 2-6.1: SerialNumber: a7835d8e5fec [ 3.077334] sda: sda1 sda2 < sda5 > [ 3.077636] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.087460] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 3.087594] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 3.187401] usb 2-8: new high-speed USB device number 5 using xhci_hcd [ 3.297618] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 3.335636] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 3.369504] usb 2-8: New USB device found, idVendor=04f2, idProduct=b444 [ 3.369508] usb 2-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.369510] usb 2-8: Product: Integrated Camera [ 3.369512] usb 2-8: Manufacturer: Chicony Electronics Co.,Ltd. [ 3.369514] usb 2-8: SerialNumber: 0001 [ 3.411185] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2560 [ 3.411196] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.419432] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.457193] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 3.539966] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 3.540113] systemd[1]: Detected architecture x86-64. [ 3.542855] systemd[1]: Set hostname to . [ 3.593795] systemd-sysv-generator[209]: stat() failed on /etc/init.d/nexus, ignoring: No such file or directory [ 3.678754] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.678983] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.679037] systemd[1]: Listening on Journal Socket. [ 3.679061] systemd[1]: Reached target User and Group Name Lookups. [ 3.679382] systemd[1]: Created slice System Slice. [ 3.695508] systemd[1]: Started Read required files in advance. [ 3.696393] systemd[1]: Mounting POSIX Message Queue File System... [ 3.697221] systemd[1]: Mounting Debug File System... [ 3.699852] systemd[1]: Starting Load Kernel Modules... [ 3.700566] systemd[1]: Mounting Huge Pages File System... [ 3.700703] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.700840] systemd[1]: Listening on Journal Audit Socket. [ 3.700880] systemd[1]: Reached target Remote File Systems (Pre). [ 3.700908] systemd[1]: Reached target Remote File Systems. [ 3.701568] systemd[1]: Started Braille Device Support. [ 3.706142] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.706208] systemd[1]: Listening on Syslog Socket. [ 3.707157] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 3.707911] systemd[1]: Starting Set console keymap... [ 3.708271] systemd[1]: Created slice User and Session Slice. [ 3.708300] systemd[1]: Reached target Slices. [ 3.708384] systemd[1]: Listening on udev Control Socket. [ 3.708694] systemd[1]: Created slice system-postgresql.slice. [ 3.708733] systemd[1]: Listening on udev Kernel Socket. [ 3.708744] systemd[1]: Reached target Encrypted Volumes. [ 3.709333] systemd[1]: Starting Uncomplicated firewall... [ 3.709412] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.710239] systemd[1]: Starting Journal Service... [ 3.710345] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 3.714354] systemd[1]: Mounted POSIX Message Queue File System. [ 3.714402] systemd[1]: Mounted Huge Pages File System. [ 3.714423] systemd[1]: Mounted Debug File System. [ 3.719263] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 3.724033] systemd[1]: Started Uncomplicated firewall. [ 3.732208] lp: driver loaded but no devices found [ 3.735182] ppdev: user-space parallel port driver [ 3.741787] systemd[1]: Started Load Kernel Modules. [ 3.745940] random: nonblocking pool is initialized [ 3.763506] systemd[1]: Mounting FUSE Control File System... [ 3.764420] systemd[1]: Starting Apply Kernel Variables... [ 3.765315] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.767395] systemd[1]: Mounted FUSE Control File System. [ 3.774727] systemd[1]: Started Journal Service. [ 3.852723] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 3.911419] systemd-journald[243]: Received request to flush runtime journal from PID 1 [ 4.062299] audit: type=1400 audit(1537161505.220:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=504 comm="apparmor_parser" [ 4.062309] audit: type=1400 audit(1537161505.220:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=504 comm="apparmor_parser" [ 4.062317] audit: type=1400 audit(1537161505.220:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=504 comm="apparmor_parser" [ 4.062323] audit: type=1400 audit(1537161505.220:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=504 comm="apparmor_parser" [ 4.067084] audit: type=1400 audit(1537161505.224:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=503 comm="apparmor_parser" [ 4.067102] audit: type=1400 audit(1537161505.224:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=503 comm="apparmor_parser" [ 4.071168] audit: type=1400 audit(1537161505.228:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=521 comm="apparmor_parser" [ 4.072302] clocksource: Switched to clocksource tsc [ 4.072973] audit: type=1400 audit(1537161505.236:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=507 comm="apparmor_parser" [ 4.085004] audit: type=1400 audit(1537161505.244:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=525 comm="apparmor_parser" [ 4.108760] Non-volatile memory driver v1.3 [ 4.116803] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.120579] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 4.120583] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.120585] thinkpad_acpi: ThinkPad BIOS JDET55WW (1.17 ), EC unknown [ 4.120587] thinkpad_acpi: Lenovo ThinkPad L450, model 20DSA0E8IG [ 4.122413] thinkpad_acpi: Unsupported brightness interface [ 4.122468] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 4.122470] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 4.135708] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 4.167408] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.194733] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.194739] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.194742] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) [ 4.194745] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 4.194748] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 4.194751] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 4.194754] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 4.194758] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 4.202372] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 [ 4.208135] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 4.208226] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 4.208328] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 4.226227] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 4.226305] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 4.226378] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 4.226450] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 4.231187] Intel(R) Wireless WiFi driver for Linux [ 4.231190] Copyright(c) 2003- 2015 Intel Corporation [ 4.277505] AVX2 version of gcm_enc/dec engaged. [ 4.277509] AES CTR mode by8 optimization enabled [ 4.279885] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2 [ 4.279912] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2 [ 4.284276] media: Linux media interface: v0.10 [ 4.295839] Bluetooth: Core ver 2.21 [ 4.295854] NET: Registered protocol family 31 [ 4.295856] Bluetooth: HCI device and connection manager initialized [ 4.295860] Bluetooth: HCI socket layer initialized [ 4.295863] Bluetooth: L2CAP socket layer initialized [ 4.295869] Bluetooth: SCO socket layer initialized [ 4.312012] usbcore: registered new interface driver btusb [ 4.317211] Linux video capture interface: v2.00 [ 4.322190] intel_rapl: Found RAPL domain package [ 4.322195] intel_rapl: Found RAPL domain core [ 4.322198] intel_rapl: Found RAPL domain uncore [ 4.322200] intel_rapl: Found RAPL domain dram [ 4.327873] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 4.337814] iwlwifi 0000:04:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm [ 4.347717] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 4.376223] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b444) [ 4.382552] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input16 [ 4.382631] usbcore: registered new interface driver uvcvideo [ 4.382633] USB Video Class driver (1.1.1) [ 4.390221] iwlwifi 0000:04:00.0: Detected Intel(R) Wireless N 7265, REV=0x210 [ 4.391142] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 4.391755] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 4.461101] cfg80211: World regulatory domain updated: [ 4.461105] cfg80211: DFS Master region: unset [ 4.461107] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4.461111] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.461115] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 4.461117] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 4.461120] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 4.461124] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 4.461126] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 4.461129] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 4.461132] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 4.463792] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 4.465313] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 4.544885] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 4.758143] Adding 16477180k swap on /dev/sda5. Priority:-1 extents:1 across:16477180k SSFS [ 5.004233] cgroup: new mount options do not match the existing superblock, will be ignored [ 5.065908] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.065912] Bluetooth: BNEP filters: protocol multicast [ 5.065916] Bluetooth: BNEP socket layer initialized [ 5.233648] vboxdrv: loading out-of-tree module taints kernel. [ 5.233904] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 5.241409] vboxdrv: Found 4 processor cores [ 5.259512] vboxdrv: TSC mode is Invariant, tentative frequency 2194903062 Hz [ 5.259516] vboxdrv: Successfully loaded version 5.2.8 (interface 0x00290001) [ 5.465578] VBoxNetFlt: Successfully started. [ 5.476329] VBoxNetAdp: Successfully started. [ 5.479941] VBoxPciLinuxInit [ 5.490204] vboxpci: IOMMU not found (not registered) [ 6.079280] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6.079860] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6.080446] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6.142408] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6.144660] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6.174754] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6.181087] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 6.383449] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 6.550880] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 7.395527] wlp4s0: authenticate with 34:8f:27:1a:ef:39 [ 7.408231] wlp4s0: send auth to 34:8f:27:1a:ef:39 (try 1/3) [ 7.412707] wlp4s0: authenticated [ 7.415326] wlp4s0: associate with 34:8f:27:1a:ef:39 (try 1/3) [ 7.428188] wlp4s0: RX AssocResp from 34:8f:27:1a:ef:39 (capab=0x431 status=0 aid=2) [ 7.430935] wlp4s0: associated [ 7.430989] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 7.472700] audit_printk_skb: 75 callbacks suppressed [ 7.472705] audit: type=1400 audit(1537161508.632:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1614 comm="apparmor_parser" [ 7.489472] aufs 4.x-rcN-20160111 [ 7.533777] Bluetooth: RFCOMM TTY layer initialized [ 7.533785] Bluetooth: RFCOMM socket layer initialized [ 7.533790] Bluetooth: RFCOMM ver 1.11 [ 7.661197] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 7.663105] Bridge firewalling registered [ 7.672340] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 7.712407] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.850844] Initializing XFRM netlink socket [ 7.949798] IPv6: ADDRCONF(NETDEV_UP): br-d1b2b8e9bd6c: link is not ready [ 8.069262] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 8.201077] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 8.437879] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 8.443746] aufs au_opts_verify:1597:dockerd[1605]: dirperm1 breaks the protection by the permission bits on the lower branch [ 8.623674] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.946000] Ebtables v2.0 registered [ 8.967483] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [ 10.563590] device virbr0-nic entered promiscuous mode [ 12.144166] Guest personality initialized and is inactive [ 12.144256] VMCI host device registered (name=vmci, major=10, minor=52) [ 12.144259] Initialized host personality [ 12.223988] NET: Registered protocol family 40 [ 16.599780] virbr0: port 1(virbr0-nic) entered listening state [ 16.599806] virbr0: port 1(virbr0-nic) entered listening state [ 18.603227] virbr0: port 1(virbr0-nic) entered learning state [ 18.618380] virbr0: port 1(virbr0-nic) entered disabled state [ 18.621926] device virbr0-nic left promiscuous mode [ 18.621957] virbr0: port 1(virbr0-nic) entered disabled state [ 30.439231] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [ 30.446456] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [ 30.451483] wlp4s0: authenticated [ 30.455133] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [ 30.462633] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=7) [ 30.466395] wlp4s0: associated [ 44.634677] usb 2-4: new low-speed USB device number 6 using xhci_hcd [ 44.766130] usb 2-4: New USB device found, idVendor=413c, idProduct=301a [ 44.766135] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.766139] usb 2-4: Product: Dell MS116 USB Optical Mouse [ 44.766142] usb 2-4: Manufacturer: PixArt [ 44.766308] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 44.794842] hidraw: raw HID events driver (C) Jiri Kosina [ 44.805496] usbcore: registered new interface driver usbhid [ 44.805500] usbhid: USB HID core driver [ 44.817235] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.0001/input/input17 [ 44.817689] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0 [ 866.915549] usb 2-4: USB disconnect, device number 6 [ 974.772299] perf interrupt took too long (2548 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 1232.735641] wlp4s0: deauthenticating from 34:8f:27:1a:e3:99 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1233.095906] PM: Syncing filesystems ... done. [ 1233.110239] PM: Preparing system for sleep (mem) [ 1233.110899] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 1233.113316] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1233.114713] PM: Suspending system (mem) [ 1233.114727] Suspending console(s) (use no_console_suspend to debug) [ 1233.266613] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1233.266655] sd 0:0:0:0: [sda] Stopping disk [ 1233.495290] e1000e: EEE TX LPI TIMER: 00000011 [ 1233.532427] PM: suspend of devices complete after 417.638 msecs [ 1233.555063] PM: late suspend of devices complete after 22.633 msecs [ 1233.574899] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 1233.574903] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 1233.574907] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 1233.590894] PM: noirq suspend of devices complete after 35.834 msecs [ 1233.591166] ACPI: Preparing to enter system sleep state S3 [ 1233.710901] ACPI : EC: EC stopped [ 1233.710902] PM: Saving platform NVS memory [ 1233.710907] Disabling non-boot CPUs ... [ 1233.711152] Broke affinity for irq 23 [ 1233.711158] Broke affinity for irq 45 [ 1233.712181] smpboot: CPU 1 is now offline [ 1233.723430] Broke affinity for irq 23 [ 1233.723438] Broke affinity for irq 45 [ 1233.724457] smpboot: CPU 2 is now offline [ 1233.735357] Broke affinity for irq 1 [ 1233.735360] Broke affinity for irq 8 [ 1233.735362] Broke affinity for irq 9 [ 1233.735364] Broke affinity for irq 12 [ 1233.735366] Broke affinity for irq 23 [ 1233.735369] Broke affinity for irq 42 [ 1233.735373] Broke affinity for irq 45 [ 1233.735375] Broke affinity for irq 46 [ 1233.735378] Broke affinity for irq 50 [ 1233.736390] smpboot: CPU 3 is now offline [ 1233.752313] ACPI: Low-level resume complete [ 1233.752366] ACPI : EC: EC started [ 1233.752367] PM: Restoring platform NVS memory [ 1233.754543] microcode: CPU0 microcode updated early to revision 0x2b, date = 2018-03-22 [ 1233.754579] Enabling non-boot CPUs ... [ 1233.772448] x86: Booting SMP configuration: [ 1233.772448] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1233.776047] cache: parent cpu1 should not be sleeping [ 1233.776114] CPU1 is up [ 1233.792468] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 1233.793781] microcode: CPU2 microcode updated early to revision 0x2b, date = 2018-03-22 [ 1233.797018] cache: parent cpu2 should not be sleeping [ 1233.797085] CPU2 is up [ 1233.824491] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1233.828102] cache: parent cpu3 should not be sleeping [ 1233.828185] CPU3 is up [ 1233.832609] ACPI: Waking up from system sleep state S3 [ 1234.156272] acpi LNXPOWER:02: Turning OFF [ 1234.185848] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 1234.189123] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1234.189233] PM: noirq resume of devices complete after 24.976 msecs [ 1234.195576] PM: early resume of devices complete after 6.322 msecs [ 1234.196399] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 1234.198221] rtc_cmos 00:02: System wakeup disabled by ACPI [ 1234.202357] sd 0:0:0:0: [sda] Starting disk [ 1234.251388] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [ 1234.266436] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [ 1234.492457] usb 2-6: reset high-speed USB device number 2 using xhci_hcd [ 1234.520225] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1234.524549] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1234.524552] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1234.527208] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1234.546582] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1234.546584] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1234.549238] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1234.560400] ata1.00: configured for UDMA/133 [ 1234.732305] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [ 1235.022928] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 1235.028426] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [ 1235.064628] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 1235.284301] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [ 1235.373928] PM: resume of devices complete after 1178.570 msecs [ 1235.374507] PM: Finishing wakeup. [ 1235.374508] Restarting tasks ... done. [ 1235.389278] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 1235.389286] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 1235.676823] e1000e: enp0s25 NIC Link is Down [ 1235.680198] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1235.680586] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 1235.681045] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 1235.699336] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 1235.743102] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 1235.744203] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 1235.781163] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1235.787198] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 1235.852087] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [ 1235.992032] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 1236.050903] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1236.051887] usb 2-4: new low-speed USB device number 7 using xhci_hcd [ 1236.183619] usb 2-4: New USB device found, idVendor=413c, idProduct=301a [ 1236.183623] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1236.183626] usb 2-4: Product: Dell MS116 USB Optical Mouse [ 1236.183628] usb 2-4: Manufacturer: PixArt [ 1236.183766] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1236.185781] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.0002/input/input18 [ 1236.185995] hid-generic 0003:413C:301A.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0 [ 1236.899670] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [ 1236.906444] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [ 1236.917441] wlp4s0: authenticated [ 1236.919739] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [ 1236.936311] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=6) [ 1236.937430] wlp4s0: associated [ 1236.937571] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 1303.323023] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [ 1303.328516] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [ 1303.470780] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 2/3) [ 1303.580365] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 3/3) [ 1303.593889] wlp4s0: authenticated [ 1303.595055] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [ 1303.605450] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=7) [ 1303.609381] wlp4s0: associated [ 1567.823918] usb 2-4: USB disconnect, device number 7 [ 1908.293901] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [ 1949.364019] usb 2-4: new low-speed USB device number 8 using xhci_hcd [ 1949.495998] usb 2-4: New USB device found, idVendor=413c, idProduct=301a [ 1949.496002] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1949.496004] usb 2-4: Product: Dell MS116 USB Optical Mouse [ 1949.496006] usb 2-4: Manufacturer: PixArt [ 1949.496148] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1949.498299] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.0003/input/input19 [ 1949.498513] hid-generic 0003:413C:301A.0003: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0 [ 4704.319844] usb 2-4: USB disconnect, device number 8 [ 4709.704809] usb 2-4: new low-speed USB device number 9 using xhci_hcd [ 4720.021734] usb 2-4: device descriptor read/64, error -110 [ 4730.238623] usb 2-4: device descriptor read/64, error -110 [ 4730.454627] usb 2-4: new low-speed USB device number 10 using xhci_hcd [ 4740.567518] usb 2-4: device descriptor read/64, error -110 [ 4750.784362] usb 2-4: device descriptor read/64, error -110 [ 4750.888415] usb usb2-port4: attempt power cycle [ 4751.512447] usb 2-4: new low-speed USB device number 11 using xhci_hcd [ 4751.514054] usb 2-4: Device not responding to setup address. [ 4751.718054] usb 2-4: Device not responding to setup address. [ 4751.920500] usb 2-4: device not accepting address 11, error -71 [ 4752.032498] usb 2-4: new low-speed USB device number 12 using xhci_hcd [ 4752.034045] usb 2-4: Device not responding to setup address. [ 4752.238048] usb 2-4: Device not responding to setup address. [ 4752.440531] usb 2-4: device not accepting address 12, error -71 [ 4752.440561] usb usb2-port4: unable to enumerate USB device [ 4778.794789] usb 2-2: new low-speed USB device number 13 using xhci_hcd [ 4778.926912] usb 2-2: New USB device found, idVendor=413c, idProduct=301a [ 4778.926916] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4778.926918] usb 2-2: Product: Dell MS116 USB Optical Mouse [ 4778.926920] usb 2-2: Manufacturer: PixArt [ 4778.927075] usb 2-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 4778.929269] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:413C:301A.0004/input/input20 [ 4778.929504] hid-generic 0003:413C:301A.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-2/input0 [ 4793.915993] usb 2-4: new low-speed USB device number 14 using xhci_hcd [ 4804.028948] usb 2-4: device descriptor read/64, error -110 [ 4819.246150] usb 2-4: device descriptor read/64, error -110 [ 4819.462191] usb 2-4: new low-speed USB device number 15 using xhci_hcd [ 4819.578207] usb 2-4: device descriptor read/64, error -71 [ 4819.798290] usb 2-4: device descriptor read/64, error -71 [ 4819.902242] usb usb2-port4: attempt power cycle [ 4820.526285] usb 2-4: new low-speed USB device number 16 using xhci_hcd [ 4820.527080] usb 2-4: Device not responding to setup address. [ 4820.730281] usb 2-4: Device not responding to setup address. [ 4820.934277] usb 2-4: device not accepting address 16, error -71 [ 4821.046293] usb 2-4: new low-speed USB device number 17 using xhci_hcd [ 4821.047068] usb 2-4: Device not responding to setup address. [ 4821.250318] usb 2-4: Device not responding to setup address. [ 4821.454320] usb 2-4: device not accepting address 17, error -71 [ 4821.454366] usb usb2-port4: unable to enumerate USB device [ 5565.344904] usb 2-4: new low-speed USB device number 18 using xhci_hcd [ 5575.455288] usb 2-4: device descriptor read/64, error -110 [ 5590.668921] usb 2-4: device descriptor read/64, error -110 [ 5590.884923] usb 2-4: new low-speed USB device number 19 using xhci_hcd [ 5591.000923] usb 2-4: device descriptor read/64, error -71 [ 5601.215343] usb 2-4: device descriptor read/64, error -110 [ 5601.319326] usb usb2-port4: attempt power cycle [ 5601.943156] usb 2-4: new low-speed USB device number 20 using xhci_hcd [ 5601.943957] usb 2-4: Device not responding to setup address. [ 5602.147209] usb 2-4: Device not responding to setup address. [ 5602.351143] usb 2-4: device not accepting address 20, error -71 [ 5602.463132] usb 2-4: new low-speed USB device number 21 using xhci_hcd [ 5602.463984] usb 2-4: Device not responding to setup address. [ 5602.667086] usb 2-4: Device not responding to setup address. [ 5602.871069] usb 2-4: device not accepting address 21, error -71 [ 5602.871096] usb usb2-port4: unable to enumerate USB device [ 5966.827843] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [ 6616.568246] usb 2-4: new low-speed USB device number 22 using xhci_hcd [ 6631.679286] usb 2-4: device descriptor read/64, error -110 [ 6636.895048] usb 2-4: device descriptor read/64, error -110 [ 6637.110964] usb 2-4: new low-speed USB device number 23 using xhci_hcd [ 6652.222051] usb 2-4: device descriptor read/64, error -110 [ 6667.437187] usb 2-4: device descriptor read/64, error -110 [ 6667.541221] usb usb2-port4: attempt power cycle [ 6668.165166] usb 2-4: new low-speed USB device number 24 using xhci_hcd [ 6668.165654] usb 2-4: Device not responding to setup address. [ 6668.369171] usb 2-4: Device not responding to setup address. [ 6668.573103] usb 2-4: device not accepting address 24, error -71 [ 6668.685098] usb 2-4: new low-speed USB device number 25 using xhci_hcd [ 6668.686424] usb 2-4: Device not responding to setup address. [ 6668.890421] usb 2-4: Device not responding to setup address. [ 6669.093064] usb 2-4: device not accepting address 25, error -71 [ 6669.093090] usb usb2-port4: unable to enumerate USB device [ 7303.480046] usb 2-4: new low-speed USB device number 26 using xhci_hcd [ 7317.552207] usb 2-4: new low-speed USB device number 27 using xhci_hcd [ 7327.872381] usb 2-4: device descriptor read/64, error -110 [ 7343.292561] usb 2-4: device descriptor read/64, error -110 [ 7343.508525] usb 2-4: new low-speed USB device number 28 using xhci_hcd [ 7348.620635] usb 2-4: device descriptor read/64, error -110 [ 7363.840758] usb 2-4: device descriptor read/64, error -110 [ 7363.944766] usb usb2-port4: attempt power cycle [ 7364.568727] usb 2-4: new low-speed USB device number 29 using xhci_hcd [ 7364.570335] usb 2-4: Device not responding to setup address. [ 7364.774324] usb 2-4: Device not responding to setup address. [ 7364.976750] usb 2-4: device not accepting address 29, error -71 [ 7365.088740] usb 2-4: new low-speed USB device number 30 using xhci_hcd [ 7365.090307] usb 2-4: Device not responding to setup address. [ 7365.294333] usb 2-4: Device not responding to setup address. [ 7365.496745] usb 2-4: device not accepting address 30, error -71 [ 7365.496771] usb usb2-port4: unable to enumerate USB device [ 7380.108903] usb 2-4: new low-speed USB device number 31 using xhci_hcd [ 7380.224918] usb 2-4: device descriptor read/64, error -71 [ 7380.444896] usb 2-4: device descriptor read/64, error -71 [ 7380.660892] usb 2-4: new low-speed USB device number 32 using xhci_hcd [ 7380.776926] usb 2-4: device descriptor read/64, error -71 [ 7381.000942] usb 2-4: device descriptor read/64, error -71 [ 7381.104898] usb usb2-port4: attempt power cycle [ 7381.728895] usb 2-4: new low-speed USB device number 33 using xhci_hcd [ 7381.730216] usb 2-4: Device not responding to setup address. [ 7381.934188] usb 2-4: Device not responding to setup address. [ 7382.136931] usb 2-4: device not accepting address 33, error -71 [ 7382.248882] usb 2-4: new low-speed USB device number 34 using xhci_hcd [ 7382.250187] usb 2-4: Device not responding to setup address. [ 7382.454206] usb 2-4: Device not responding to setup address. [ 7382.656919] usb 2-4: device not accepting address 34, error -71 [ 7382.656946] usb usb2-port4: unable to enumerate USB device [ 7384.408911] usb 2-4: new low-speed USB device number 35 using xhci_hcd [ 7422.441144] usb 2-4: new low-speed USB device number 36 using xhci_hcd [ 7437.761233] usb 2-4: device descriptor read/64, error -110 [ 7448.181248] usb 2-4: device descriptor read/64, error -110 [ 7448.397212] usb 2-4: new low-speed USB device number 37 using xhci_hcd [ 7458.713290] usb 2-4: device descriptor read/64, error -110 [ 7469.133266] usb 2-4: device descriptor read/64, error -110 [ 7469.237276] usb usb2-port4: attempt power cycle [ 7469.861275] usb 2-4: new low-speed USB device number 38 using xhci_hcd [ 7469.862643] usb 2-4: Device not responding to setup address. [ 7470.066643] usb 2-4: Device not responding to setup address. [ 7470.269247] usb 2-4: device not accepting address 38, error -71 [ 7470.381265] usb 2-4: new low-speed USB device number 39 using xhci_hcd [ 7470.382614] usb 2-4: Device not responding to setup address. [ 7470.586600] usb 2-4: Device not responding to setup address. [ 7470.789250] usb 2-4: device not accepting address 39, error -71 [ 7470.789277] usb usb2-port4: unable to enumerate USB device [ 9066.121696] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [13217.194167] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [13877.170636] usb 2-4: new low-speed USB device number 41 using xhci_hcd [13887.286755] usb 2-4: device descriptor read/64, error -110 [13897.506871] usb 2-4: device descriptor read/64, error -110 [13897.722885] usb 2-4: new low-speed USB device number 42 using xhci_hcd [13897.839034] usb 2-4: device descriptor read/64, error -71 [13898.058855] usb 2-4: device descriptor read/64, error -71 [13898.162880] usb usb2-port4: attempt power cycle [13898.790854] usb 2-4: new low-speed USB device number 43 using xhci_hcd [13898.792156] usb 2-4: Device not responding to setup address. [13898.996147] usb 2-4: Device not responding to setup address. [13899.198881] usb 2-4: device not accepting address 43, error -71 [13899.310942] usb 2-4: new low-speed USB device number 44 using xhci_hcd [13899.311756] usb 2-4: Device not responding to setup address. [13899.514907] usb 2-4: Device not responding to setup address. [13899.718941] usb 2-4: device not accepting address 44, error -71 [13899.718969] usb usb2-port4: unable to enumerate USB device [15863.432619] usb 2-4: new low-speed USB device number 45 using xhci_hcd [15863.548642] usb 2-4: device descriptor read/64, error -71 [15863.768628] usb 2-4: device descriptor read/64, error -71 [15863.984607] usb 2-4: new low-speed USB device number 46 using xhci_hcd [15864.100609] usb 2-4: device descriptor read/64, error -71 [15864.320622] usb 2-4: device descriptor read/64, error -71 [15864.424589] usb usb2-port4: attempt power cycle [15865.048594] usb 2-4: new low-speed USB device number 47 using xhci_hcd [15865.049948] usb 2-4: Device not responding to setup address. [15865.253975] usb 2-4: Device not responding to setup address. [15865.456586] usb 2-4: device not accepting address 47, error -71 [15865.568548] usb 2-4: new low-speed USB device number 48 using xhci_hcd [15865.569893] usb 2-4: Device not responding to setup address. [15865.773909] usb 2-4: Device not responding to setup address. [15865.976576] usb 2-4: device not accepting address 48, error -71 [15865.976605] usb usb2-port4: unable to enumerate USB device [15866.508519] usb 2-4: new low-speed USB device number 49 using xhci_hcd [15866.624613] usb 2-4: device descriptor read/64, error -71 [15877.044437] usb 2-4: device descriptor read/64, error -110 [15877.260446] usb 2-4: new low-speed USB device number 50 using xhci_hcd [15877.376414] usb 2-4: device descriptor read/64, error -71 [15887.592299] usb 2-4: device descriptor read/64, error -110 [15887.696300] usb usb2-port4: attempt power cycle [15888.320221] usb 2-4: new low-speed USB device number 51 using xhci_hcd [15888.321790] usb 2-4: Device not responding to setup address. [15888.525827] usb 2-4: Device not responding to setup address. [15888.728202] usb 2-4: device not accepting address 51, error -71 [15888.840204] usb 2-4: new low-speed USB device number 52 using xhci_hcd [15888.841791] usb 2-4: Device not responding to setup address. [15889.045788] usb 2-4: Device not responding to setup address. [15889.248258] usb 2-4: device not accepting address 52, error -71 [15889.248287] usb usb2-port4: unable to enumerate USB device [16153.077186] usb 2-4: new low-speed USB device number 54 using xhci_hcd [16311.983004] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [16311.989644] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [16312.093647] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 2/3) [16312.197535] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 3/3) [16312.201130] wlp4s0: authenticated [16312.203684] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [16312.210427] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=6) [16312.212199] wlp4s0: associated [16431.973170] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [16431.977768] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [16431.979571] wlp4s0: authenticated [16431.982702] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [16431.994992] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=4) [16432.001003] wlp4s0: associated [17632.009276] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [17632.017042] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [17632.127219] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 2/3) [17632.234728] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 3/3) [17632.348482] wlp4s0: authentication with 34:8f:27:1a:f0:d9 timed out [17632.537322] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [17632.542217] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [17632.646172] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 2/3) [17632.648137] wlp4s0: authenticated [17632.648648] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [17632.659823] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=4) [17632.665273] wlp4s0: associated [17679.001800] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [25299.108159] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [25858.559467] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [27333.384028] wlp4s0: deauthenticating from 34:8f:27:1a:e3:99 by local choice (Reason: 3=DEAUTH_LEAVING) [27333.657167] usb 2-2: USB disconnect, device number 13 [27334.616388] PM: Syncing filesystems ... done. [27334.657290] PM: Preparing system for sleep (mem) [27334.657703] Freezing user space processes ... (elapsed 0.002 seconds) done. [27334.660192] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [27334.661662] PM: Suspending system (mem) [27334.661677] Suspending console(s) (use no_console_suspend to debug) [27334.812980] sd 0:0:0:0: [sda] Synchronizing SCSI cache [27334.813030] sd 0:0:0:0: [sda] Stopping disk [27335.040382] e1000e: EEE TX LPI TIMER: 00000011 [27335.393980] PM: suspend of devices complete after 732.145 msecs [27335.416074] PM: late suspend of devices complete after 22.090 msecs [27335.417870] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [27335.417980] e1000e 0000:00:19.0: System wakeup enabled by ACPI [27335.418043] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [27335.432463] PM: noirq suspend of devices complete after 16.386 msecs [27335.432735] ACPI: Preparing to enter system sleep state S3 [27335.551996] ACPI : EC: EC stopped [27335.551996] PM: Saving platform NVS memory [27335.552001] Disabling non-boot CPUs ... [27335.552225] Broke affinity for irq 23 [27335.552231] Broke affinity for irq 50 [27335.553254] smpboot: CPU 1 is now offline [27335.568599] Broke affinity for irq 23 [27335.568607] Broke affinity for irq 46 [27335.568611] Broke affinity for irq 50 [27335.569631] smpboot: CPU 2 is now offline [27335.584508] Broke affinity for irq 1 [27335.584510] Broke affinity for irq 8 [27335.584512] Broke affinity for irq 9 [27335.584514] Broke affinity for irq 12 [27335.584517] Broke affinity for irq 23 [27335.584520] Broke affinity for irq 42 [27335.584524] Broke affinity for irq 45 [27335.584526] Broke affinity for irq 46 [27335.584528] Broke affinity for irq 50 [27335.585546] smpboot: CPU 3 is now offline [27335.601465] ACPI: Low-level resume complete [27335.601518] ACPI : EC: EC started [27335.601519] PM: Restoring platform NVS memory [27335.603714] microcode: CPU0 microcode updated early to revision 0x2b, date = 2018-03-22 [27335.603748] Enabling non-boot CPUs ... [27335.621551] x86: Booting SMP configuration: [27335.621552] smpboot: Booting Node 0 Processor 1 APIC 0x1 [27335.625159] cache: parent cpu1 should not be sleeping [27335.625225] CPU1 is up [27335.641560] smpboot: Booting Node 0 Processor 2 APIC 0x2 [27335.642870] microcode: CPU2 microcode updated early to revision 0x2b, date = 2018-03-22 [27335.646115] cache: parent cpu2 should not be sleeping [27335.646178] CPU2 is up [27335.673586] smpboot: Booting Node 0 Processor 3 APIC 0x3 [27335.677318] cache: parent cpu3 should not be sleeping [27335.677417] CPU3 is up [27335.680719] ACPI: Waking up from system sleep state S3 [27336.025677] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [27336.025774] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [27336.030839] PM: noirq resume of devices complete after 21.408 msecs [27336.037306] PM: early resume of devices complete after 6.443 msecs [27336.037538] e1000e 0000:00:19.0: System wakeup disabled by ACPI [27336.039625] rtc_cmos 00:02: System wakeup disabled by ACPI [27336.041010] sd 0:0:0:0: [sda] Starting disk [27336.096616] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [27336.111632] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [27336.337753] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [27336.357496] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [27336.361864] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27336.361868] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27336.364525] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [27336.383839] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27336.383842] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27336.386503] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [27336.397700] ata1.00: configured for UDMA/133 [27336.581762] usb 2-6: reset high-speed USB device number 2 using xhci_hcd [27336.821768] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [27336.862538] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [27336.901812] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [27337.021774] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [27337.111500] PM: resume of devices complete after 1074.185 msecs [27337.111998] PM: Finishing wakeup. [27337.111999] Restarting tasks ... done. [27337.132589] Bluetooth: hci0: read Intel version: 370810011003110e00 [27337.132667] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [27337.431576] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [27337.433691] e1000e: enp0s25 NIC Link is Down [27337.436243] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27337.436842] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [27337.437339] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [27337.499210] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [27337.500108] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [27337.529086] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27337.530528] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [27337.733609] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [27337.802249] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27338.718356] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [27338.722996] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [27338.827750] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 2/3) [27338.829495] wlp4s0: authenticated [27338.833429] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [27338.843281] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=5) [27338.847415] wlp4s0: associated [27338.847494] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [27654.063640] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [27654.068917] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [27654.196729] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 2/3) [27654.230313] wlp4s0: authenticated [27654.230690] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [27654.248590] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=1) [27654.250382] wlp4s0: associated [27674.166820] usb 2-4: new low-speed USB device number 55 using xhci_hcd [27674.298894] usb 2-4: New USB device found, idVendor=413c, idProduct=301a [27674.298898] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [27674.298901] usb 2-4: Product: Dell MS116 USB Optical Mouse [27674.298903] usb 2-4: Manufacturer: PixArt [27674.299120] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [27674.301067] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.0005/input/input21 [27674.301280] hid-generic 0003:413C:301A.0005: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0 [30773.937266] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [30773.942202] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [30773.943713] wlp4s0: authenticated [30773.950895] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [30773.961934] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=5) [30773.962824] wlp4s0: associated [32093.897884] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [32093.902727] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [32094.008314] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 2/3) [32094.016264] wlp4s0: authenticated [32094.018637] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [32094.027284] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=2) [32094.038616] wlp4s0: associated [32567.349004] usb 2-4: USB disconnect, device number 55 [34936.034840] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [35514.968849] wlp4s0: deauthenticating from 34:8f:27:1a:e3:99 by local choice (Reason: 3=DEAUTH_LEAVING) [35515.770595] PM: Syncing filesystems ... done. [35515.802490] PM: Preparing system for sleep (mem) [35515.803172] Freezing user space processes ... (elapsed 0.066 seconds) done. [35515.869359] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [35515.870841] PM: Suspending system (mem) [35515.870855] Suspending console(s) (use no_console_suspend to debug) [35516.020688] sd 0:0:0:0: [sda] Synchronizing SCSI cache [35516.020728] sd 0:0:0:0: [sda] Stopping disk [35516.238388] e1000e: EEE TX LPI TIMER: 00000011 [35516.326242] PM: suspend of devices complete after 455.259 msecs [35516.346078] PM: late suspend of devices complete after 19.832 msecs [35516.348802] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [35516.348896] e1000e 0000:00:19.0: System wakeup enabled by ACPI [35516.348908] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [35516.362512] PM: noirq suspend of devices complete after 16.430 msecs [35516.362784] ACPI: Preparing to enter system sleep state S3 [35516.481991] ACPI : EC: EC stopped [35516.481992] PM: Saving platform NVS memory [35516.481997] Disabling non-boot CPUs ... [35516.482255] Broke affinity for irq 45 [35516.482258] Broke affinity for irq 50 [35516.483277] smpboot: CPU 1 is now offline [35516.494604] Broke affinity for irq 45 [35516.494607] Broke affinity for irq 46 [35516.494610] Broke affinity for irq 50 [35516.495631] smpboot: CPU 2 is now offline [35516.510499] Broke affinity for irq 1 [35516.510501] Broke affinity for irq 8 [35516.510503] Broke affinity for irq 9 [35516.510505] Broke affinity for irq 12 [35516.510508] Broke affinity for irq 23 [35516.510510] Broke affinity for irq 42 [35516.510515] Broke affinity for irq 45 [35516.510517] Broke affinity for irq 46 [35516.510519] Broke affinity for irq 50 [35516.511535] smpboot: CPU 3 is now offline [35516.527459] ACPI: Low-level resume complete [35516.527513] ACPI : EC: EC started [35516.527513] PM: Restoring platform NVS memory [35516.529695] microcode: CPU0 microcode updated early to revision 0x2b, date = 2018-03-22 [35516.529731] Enabling non-boot CPUs ... [35516.547532] x86: Booting SMP configuration: [35516.547533] smpboot: Booting Node 0 Processor 1 APIC 0x1 [35516.551137] cache: parent cpu1 should not be sleeping [35516.551202] CPU1 is up [35516.567559] smpboot: Booting Node 0 Processor 2 APIC 0x2 [35516.568869] microcode: CPU2 microcode updated early to revision 0x2b, date = 2018-03-22 [35516.572122] cache: parent cpu2 should not be sleeping [35516.572185] CPU2 is up [35516.591581] smpboot: Booting Node 0 Processor 3 APIC 0x3 [35516.595235] cache: parent cpu3 should not be sleeping [35516.595303] CPU3 is up [35516.598599] ACPI: Waking up from system sleep state S3 [35516.950733] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [35516.952019] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [35516.952133] PM: noirq resume of devices complete after 24.712 msecs [35516.957625] PM: early resume of devices complete after 5.463 msecs [35516.957885] e1000e 0000:00:19.0: System wakeup disabled by ACPI [35516.959761] rtc_cmos 00:02: System wakeup disabled by ACPI [35516.961242] sd 0:0:0:0: [sda] Starting disk [35517.014549] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [35517.029648] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [35517.044730] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [35517.271677] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [35517.275427] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [35517.279796] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35517.279799] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35517.282434] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [35517.301873] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35517.301876] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35517.304533] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [35517.315713] ata1.00: configured for UDMA/133 [35517.567632] usb 2-6: reset high-speed USB device number 2 using xhci_hcd [35517.783531] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [35517.807694] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [35517.822790] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [35518.007732] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [35518.098498] PM: resume of devices complete after 1140.896 msecs [35518.099004] PM: Finishing wakeup. [35518.099006] Restarting tasks ... done. [35518.128267] Bluetooth: hci0: read Intel version: 370810011003110e00 [35518.128275] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [35518.311511] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [35518.383212] e1000e: enp0s25 NIC Link is Down [35518.385916] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [35518.386746] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [35518.387374] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [35518.408292] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [35518.448836] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [35518.449719] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [35518.475044] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [35518.479488] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [35518.687565] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [35518.764974] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [35519.606251] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [35519.611359] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [35519.720822] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 2/3) [35519.724992] wlp4s0: authenticated [35519.727353] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [35519.736994] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=8) [35519.738280] wlp4s0: associated [35519.738345] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [35585.973486] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [35585.978215] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [35585.998897] wlp4s0: authenticated [35586.002048] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [35586.013346] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=7) [35586.014382] wlp4s0: associated [37620.316251] usb 2-4: new low-speed USB device number 56 using xhci_hcd [37620.447799] usb 2-4: New USB device found, idVendor=413c, idProduct=301a [37620.447803] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [37620.447806] usb 2-4: Product: Dell MS116 USB Optical Mouse [37620.447808] usb 2-4: Manufacturer: PixArt [37620.448037] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [37620.450382] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.0006/input/input22 [37620.450774] hid-generic 0003:413C:301A.0006: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0 [37735.315043] wlp4s0: deauthenticating from 34:8f:27:1a:e3:99 by local choice (Reason: 3=DEAUTH_LEAVING) [37735.677417] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [37735.683676] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [37735.800028] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 2/3) [37735.809322] wlp4s0: authenticated [37735.811327] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [37735.849851] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=9) [37735.865010] wlp4s0: associated [37927.978365] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [37927.985713] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [37928.119473] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 2/3) [37928.263397] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 3/3) [37928.373212] wlp4s0: authentication with 34:8f:27:1a:e3:99 timed out [37928.578131] wlp4s0: authenticate with 34:8f:27:1a:ef:39 [37928.582739] wlp4s0: send auth to 34:8f:27:1a:ef:39 (try 1/3) [37928.721052] wlp4s0: send auth to 34:8f:27:1a:ef:39 (try 2/3) [37928.839189] wlp4s0: send auth to 34:8f:27:1a:ef:39 (try 3/3) [37928.855099] wlp4s0: authenticated [37928.857164] wlp4s0: associate with 34:8f:27:1a:ef:39 (try 1/3) [37928.873438] wlp4s0: RX AssocResp from 34:8f:27:1a:ef:39 (capab=0x431 status=0 aid=9) [37928.876389] wlp4s0: associated [38030.951421] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [38030.956698] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [38030.968884] wlp4s0: authenticated [38030.972226] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [38030.978731] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=9) [38030.980232] wlp4s0: associated [38574.963085] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [41163.416097] usb 2-4: USB disconnect, device number 56 [41166.256826] usb 2-4: new high-speed USB device number 57 using xhci_hcd [41166.387256] usb 2-4: New USB device found, idVendor=054c, idProduct=02a5 [41166.387260] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [41166.387263] usb 2-4: Product: Storage Media [41166.387265] usb 2-4: Manufacturer: Sony [41166.387267] usb 2-4: SerialNumber: 7C2B1089BF359C9136 [41166.406860] usb-storage 2-4:1.0: USB Mass Storage device detected [41166.407007] usb-storage 2-4:1.0: Quirks match for vid 054c pid 02a5: 80000 [41166.407047] scsi host3: usb-storage 2-4:1.0 [41166.407326] usbcore: registered new interface driver usb-storage [41166.409825] usbcore: registered new interface driver uas [41167.688163] scsi 3:0:0:0: Direct-Access Sony Storage Media PMAP PQ: 0 ANSI: 6 [41167.688774] sd 3:0:0:0: Attached scsi generic sg1 type 0 [41167.691579] sd 3:0:0:0: [sdb] 30302208 512-byte logical blocks: (15.5 GB/14.4 GiB) [41167.691761] sd 3:0:0:0: [sdb] Write Protect is off [41167.691765] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00 [41167.691935] sd 3:0:0:0: [sdb] No Caching mode page found [41167.691939] sd 3:0:0:0: [sdb] Assuming drive cache: write through [41167.696745] sdb: sdb1 [41167.699021] sd 3:0:0:0: [sdb] Attached SCSI removable disk [41264.908064] usb 2-4: USB disconnect, device number 57 [41264.938311] FAT-fs (sdb1): unable to read boot sector to mark fs as dirty [41334.629144] usb 2-1: new high-speed USB device number 58 using xhci_hcd [41334.763820] usb 2-1: New USB device found, idVendor=054c, idProduct=02a5 [41334.763824] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [41334.763827] usb 2-1: Product: Storage Media [41334.763830] usb 2-1: Manufacturer: Sony [41334.763832] usb 2-1: SerialNumber: 7C2B1089BF359C9136 [41334.764568] usb-storage 2-1:1.0: USB Mass Storage device detected [41334.764715] usb-storage 2-1:1.0: Quirks match for vid 054c pid 02a5: 80000 [41334.764745] scsi host4: usb-storage 2-1:1.0 [41336.125486] scsi 4:0:0:0: Direct-Access Sony Storage Media PMAP PQ: 0 ANSI: 6 [41336.126634] sd 4:0:0:0: Attached scsi generic sg1 type 0 [41336.130093] sd 4:0:0:0: [sdb] 30302208 512-byte logical blocks: (15.5 GB/14.4 GiB) [41336.130301] sd 4:0:0:0: [sdb] Write Protect is off [41336.130306] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [41336.130481] sd 4:0:0:0: [sdb] No Caching mode page found [41336.130485] sd 4:0:0:0: [sdb] Assuming drive cache: write through [41336.136021] sdb: sdb1 [41336.137656] sd 4:0:0:0: [sdb] Attached SCSI removable disk [41337.157926] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [41337.405277] usb 2-4: new low-speed USB device number 59 using xhci_hcd [41337.536960] usb 2-4: New USB device found, idVendor=413c, idProduct=301a [41337.536964] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [41337.536967] usb 2-4: Product: Dell MS116 USB Optical Mouse [41337.536969] usb 2-4: Manufacturer: PixArt [41337.537179] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [41337.539050] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.0007/input/input23 [41337.539321] hid-generic 0003:413C:301A.0007: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0 [42338.522552] usb 2-1: USB disconnect, device number 58 [43223.802463] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [43614.953588] wlp4s0: deauthenticating from 34:8f:27:1a:f0:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [43615.292488] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [43615.297072] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [43615.410214] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 2/3) [43615.577759] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 3/3) [43615.680798] wlp4s0: authentication with 34:8f:27:1a:f0:d9 timed out [43615.830789] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [43615.836030] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [43615.942978] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 2/3) [43615.951490] wlp4s0: authenticated [43615.952794] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [43615.960638] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=5) [43615.965200] wlp4s0: associated [45321.019135] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [46310.688769] wlp4s0: authenticate with 34:8f:27:1a:ef:39 [46310.694613] wlp4s0: send auth to 34:8f:27:1a:ef:39 (try 1/3) [46310.700184] wlp4s0: authenticated [46310.700848] wlp4s0: associate with 34:8f:27:1a:ef:39 (try 1/3) [46310.730147] wlp4s0: RX AssocResp from 34:8f:27:1a:ef:39 (capab=0x431 status=0 aid=6) [46310.733208] wlp4s0: associated [46311.001376] iwlwifi 0000:04:00.0: No association and the time event is over already... [46311.001394] wlp4s0: Connection to AP 34:8f:27:1a:ef:39 lost [46311.208266] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [46311.213396] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [46311.331370] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 2/3) [46311.380666] wlp4s0: authenticated [46311.384703] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [46311.404559] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=5) [46311.407679] wlp4s0: associated [46758.699531] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [48033.879664] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [48095.741809] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [50514.880692] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [51710.618086] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [56604.211007] usb 2-4: USB disconnect, device number 59 [56608.185980] wlp4s0: deauthenticating from 34:8f:27:1a:e3:99 by local choice (Reason: 3=DEAUTH_LEAVING) [56618.259906] PM: Syncing filesystems ... done. [56618.281990] PM: Preparing system for sleep (mem) [56618.282448] Freezing user space processes ... (elapsed 0.002 seconds) done. [56618.284997] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [56618.286459] PM: Suspending system (mem) [56618.286473] Suspending console(s) (use no_console_suspend to debug) [56618.437655] sd 0:0:0:0: [sda] Synchronizing SCSI cache [56618.437693] sd 0:0:0:0: [sda] Stopping disk [56618.665284] e1000e: EEE TX LPI TIMER: 00000011 [56618.748836] PM: suspend of devices complete after 462.221 msecs [56618.768901] PM: late suspend of devices complete after 20.049 msecs [56618.770759] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [56618.770826] e1000e 0000:00:19.0: System wakeup enabled by ACPI [56618.770880] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [56618.785270] PM: noirq suspend of devices complete after 16.366 msecs [56618.785542] ACPI: Preparing to enter system sleep state S3 [56618.904795] ACPI : EC: EC stopped [56618.904795] PM: Saving platform NVS memory [56618.904800] Disabling non-boot CPUs ... [56618.905056] Broke affinity for irq 23 [56618.905062] Broke affinity for irq 50 [56618.906084] smpboot: CPU 1 is now offline [56618.917417] Broke affinity for irq 23 [56618.917425] Broke affinity for irq 45 [56618.917428] Broke affinity for irq 46 [56618.917431] Broke affinity for irq 50 [56618.918455] smpboot: CPU 2 is now offline [56618.929323] Broke affinity for irq 1 [56618.929326] Broke affinity for irq 8 [56618.929328] Broke affinity for irq 9 [56618.929330] Broke affinity for irq 12 [56618.929333] Broke affinity for irq 23 [56618.929336] Broke affinity for irq 42 [56618.929340] Broke affinity for irq 45 [56618.929342] Broke affinity for irq 46 [56618.929345] Broke affinity for irq 50 [56618.930363] smpboot: CPU 3 is now offline [56618.946312] ACPI: Low-level resume complete [56618.946365] ACPI : EC: EC started [56618.946366] PM: Restoring platform NVS memory [56618.948571] microcode: CPU0 microcode updated early to revision 0x2b, date = 2018-03-22 [56618.948613] Enabling non-boot CPUs ... [56618.966354] x86: Booting SMP configuration: [56618.966355] smpboot: Booting Node 0 Processor 1 APIC 0x1 [56618.969954] cache: parent cpu1 should not be sleeping [56618.970022] CPU1 is up [56618.990375] smpboot: Booting Node 0 Processor 2 APIC 0x2 [56618.991687] microcode: CPU2 microcode updated early to revision 0x2b, date = 2018-03-22 [56618.994920] cache: parent cpu2 should not be sleeping [56618.994985] CPU2 is up [56619.018421] smpboot: Booting Node 0 Processor 3 APIC 0x3 [56619.022065] cache: parent cpu3 should not be sleeping [56619.022132] CPU3 is up [56619.025405] ACPI: Waking up from system sleep state S3 [56619.377772] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [56619.382950] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [56619.383114] PM: noirq resume of devices complete after 24.871 msecs [56619.389512] PM: early resume of devices complete after 6.375 msecs [56619.390014] e1000e 0000:00:19.0: System wakeup disabled by ACPI [56619.391742] rtc_cmos 00:02: System wakeup disabled by ACPI [56619.393068] sd 0:0:0:0: [sda] Starting disk [56619.445352] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [56619.460434] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [56619.690471] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [56619.710270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [56619.714604] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [56619.714608] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [56619.717264] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [56619.736679] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [56619.736682] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [56619.739339] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [56619.750484] ata1.00: configured for UDMA/133 [56619.930496] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [56620.214775] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [56620.226437] usb 2-6: reset high-speed USB device number 2 using xhci_hcd [56620.252967] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [56620.634527] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [56620.724405] PM: resume of devices complete after 1334.886 msecs [56620.724917] PM: Finishing wakeup. [56620.724918] Restarting tasks ... done. [56620.751994] Bluetooth: hci0: read Intel version: 370810011003110e00 [56620.752067] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [56621.071011] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [56621.154301] e1000e: enp0s25 NIC Link is Down [56621.159230] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [56621.160010] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [56621.160786] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [56621.221748] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [56621.223186] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [56621.247894] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [56621.250639] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [56621.454421] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [56621.519207] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [56622.362085] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [56622.367350] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [56622.377640] wlp4s0: authenticated [56622.378229] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [56622.393357] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=3) [56622.398046] wlp4s0: associated [56622.398141] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [56682.114332] usb 2-4: new low-speed USB device number 60 using xhci_hcd [56682.246123] usb 2-4: New USB device found, idVendor=413c, idProduct=301a [56682.246126] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [56682.246129] usb 2-4: Product: Dell MS116 USB Optical Mouse [56682.246131] usb 2-4: Manufacturer: PixArt [56682.246316] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [56682.248345] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.0008/input/input24 [56682.248600] hid-generic 0003:413C:301A.0008: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0 [57057.696794] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [57057.702402] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [57057.828523] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 2/3) [57057.830661] wlp4s0: authenticated [57057.834663] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [57057.857275] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=4) [57057.867932] wlp4s0: associated [57317.946951] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [59407.026768] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [60451.717113] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [61737.620818] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [61737.625970] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [61737.650909] wlp4s0: authenticated [61737.651231] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [61737.658864] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=3) [61737.671200] wlp4s0: associated [62669.967212] usb 2-4: USB disconnect, device number 60 [62686.008980] wlp4s0: deauthenticating from 34:8f:27:1a:e3:99 by local choice (Reason: 3=DEAUTH_LEAVING) [62686.802234] PM: Syncing filesystems ... done. [62686.835430] PM: Preparing system for sleep (mem) [62686.835891] Freezing user space processes ... (elapsed 0.055 seconds) done. [62686.891387] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [62686.892926] PM: Suspending system (mem) [62686.892942] Suspending console(s) (use no_console_suspend to debug) [62687.046821] sd 0:0:0:0: [sda] Synchronizing SCSI cache [62687.046899] sd 0:0:0:0: [sda] Stopping disk [62687.274086] e1000e: EEE TX LPI TIMER: 00000011 [62687.361477] PM: suspend of devices complete after 468.393 msecs [62687.381759] PM: late suspend of devices complete after 20.267 msecs [62687.384468] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [62687.384573] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [62687.384599] e1000e 0000:00:19.0: System wakeup enabled by ACPI [62687.398144] PM: noirq suspend of devices complete after 16.382 msecs [62687.398416] ACPI: Preparing to enter system sleep state S3 [62687.517653] ACPI : EC: EC stopped [62687.517653] PM: Saving platform NVS memory [62687.517659] Disabling non-boot CPUs ... [62687.517899] Broke affinity for irq 23 [62687.517905] Broke affinity for irq 46 [62687.518927] smpboot: CPU 1 is now offline [62687.530267] Broke affinity for irq 23 [62687.530275] Broke affinity for irq 45 [62687.530278] Broke affinity for irq 46 [62687.530280] Broke affinity for irq 50 [62687.531300] smpboot: CPU 2 is now offline [62687.542171] Broke affinity for irq 1 [62687.542173] Broke affinity for irq 8 [62687.542175] Broke affinity for irq 9 [62687.542177] Broke affinity for irq 12 [62687.542180] Broke affinity for irq 23 [62687.542183] Broke affinity for irq 42 [62687.542187] Broke affinity for irq 45 [62687.542190] Broke affinity for irq 46 [62687.542192] Broke affinity for irq 50 [62687.543209] smpboot: CPU 3 is now offline [62687.559352] ACPI: Low-level resume complete [62687.559405] ACPI : EC: EC started [62687.559405] PM: Restoring platform NVS memory [62687.561560] microcode: CPU0 microcode updated early to revision 0x2b, date = 2018-03-22 [62687.561598] Enabling non-boot CPUs ... [62687.579307] x86: Booting SMP configuration: [62687.579308] smpboot: Booting Node 0 Processor 1 APIC 0x1 [62687.582821] cache: parent cpu1 should not be sleeping [62687.582890] CPU1 is up [62687.611329] smpboot: Booting Node 0 Processor 2 APIC 0x2 [62687.612643] microcode: CPU2 microcode updated early to revision 0x2b, date = 2018-03-22 [62687.615907] cache: parent cpu2 should not be sleeping [62687.615975] CPU2 is up [62687.639368] smpboot: Booting Node 0 Processor 3 APIC 0x3 [62687.643076] cache: parent cpu3 should not be sleeping [62687.643173] CPU3 is up [62687.647597] ACPI: Waking up from system sleep state S3 [62687.998591] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [62688.004457] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [62688.004568] PM: noirq resume of devices complete after 25.355 msecs [62688.011006] PM: early resume of devices complete after 6.407 msecs [62688.011208] e1000e 0000:00:19.0: System wakeup disabled by ACPI [62688.012997] rtc_cmos 00:02: System wakeup disabled by ACPI [62688.014624] sd 0:0:0:0: [sda] Starting disk [62688.070241] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [62688.085206] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [62688.100210] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [62688.327468] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [62688.335247] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [62688.339611] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [62688.339614] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [62688.342270] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [62688.361626] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [62688.361629] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [62688.364284] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [62688.375453] ata1.00: configured for UDMA/133 [62688.623349] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [62688.834983] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [62688.867413] usb 2-6: reset high-speed USB device number 2 using xhci_hcd [62688.873514] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [62689.275519] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [62689.365228] PM: resume of devices complete after 1354.228 msecs [62689.365774] PM: Finishing wakeup. [62689.365776] Restarting tasks ... done. [62689.390360] Bluetooth: hci0: read Intel version: 370810011003110e00 [62689.390368] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [62689.615393] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [62689.677302] e1000e: enp0s25 NIC Link is Down [62689.679938] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [62689.680507] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [62689.681285] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [62689.685398] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [62689.742998] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [62689.743688] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [62689.766841] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [62689.769658] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [62689.971326] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [62690.040999] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [62690.881713] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [62690.887160] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [62690.896628] wlp4s0: authenticated [62690.899152] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [62690.906228] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=3) [62690.913872] wlp4s0: associated [62690.913933] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [62716.946357] wlp4s0: deauthenticating from 34:8f:27:1a:e3:99 by local choice (Reason: 3=DEAUTH_LEAVING) [62717.222100] PM: Syncing filesystems ... done. [62717.248201] PM: Preparing system for sleep (mem) [62717.248645] Freezing user space processes ... (elapsed 0.002 seconds) done. [62717.251200] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [62717.252739] PM: Suspending system (mem) [62717.252753] Suspending console(s) (use no_console_suspend to debug) [62717.408377] sd 0:0:0:0: [sda] Synchronizing SCSI cache [62717.408470] sd 0:0:0:0: [sda] Stopping disk [62717.635280] e1000e: EEE TX LPI TIMER: 00000011 [62717.722768] PM: suspend of devices complete after 469.879 msecs [62717.743054] PM: late suspend of devices complete after 20.277 msecs [62717.745124] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [62717.745186] e1000e 0000:00:19.0: System wakeup enabled by ACPI [62717.745256] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [62717.759423] PM: noirq suspend of devices complete after 16.357 msecs [62717.759695] ACPI: Preparing to enter system sleep state S3 [62717.878932] ACPI : EC: EC stopped [62717.878933] PM: Saving platform NVS memory [62717.878938] Disabling non-boot CPUs ... [62717.879209] Broke affinity for irq 23 [62717.879213] Broke affinity for irq 42 [62717.879218] Broke affinity for irq 45 [62717.880240] smpboot: CPU 1 is now offline [62717.891801] Broke affinity for irq 23 [62717.891809] Broke affinity for irq 42 [62717.891819] Broke affinity for irq 45 [62717.891826] Broke affinity for irq 46 [62717.891832] Broke affinity for irq 50 [62717.892901] smpboot: CPU 2 is now offline [62717.903547] Broke affinity for irq 1 [62717.903550] Broke affinity for irq 8 [62717.903552] Broke affinity for irq 9 [62717.903555] Broke affinity for irq 12 [62717.903558] Broke affinity for irq 23 [62717.903561] Broke affinity for irq 42 [62717.903566] Broke affinity for irq 45 [62717.903569] Broke affinity for irq 46 [62717.903572] Broke affinity for irq 50 [62717.904594] smpboot: CPU 3 is now offline [62717.920558] ACPI: Low-level resume complete [62717.920612] ACPI : EC: EC started [62717.920612] PM: Restoring platform NVS memory [62717.922817] microcode: CPU0 microcode updated early to revision 0x2b, date = 2018-03-22 [62717.922852] Enabling non-boot CPUs ... [62717.940538] x86: Booting SMP configuration: [62717.940538] smpboot: Booting Node 0 Processor 1 APIC 0x1 [62717.944149] cache: parent cpu1 should not be sleeping [62717.944217] CPU1 is up [62717.960560] smpboot: Booting Node 0 Processor 2 APIC 0x2 [62717.961872] microcode: CPU2 microcode updated early to revision 0x2b, date = 2018-03-22 [62717.965128] cache: parent cpu2 should not be sleeping [62717.965193] CPU2 is up [62717.992588] smpboot: Booting Node 0 Processor 3 APIC 0x3 [62717.996258] cache: parent cpu3 should not be sleeping [62717.996338] CPU3 is up [62717.999633] ACPI: Waking up from system sleep state S3 [62718.349904] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [62718.350780] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [62718.350860] PM: noirq resume of devices complete after 22.442 msecs [62718.356575] PM: early resume of devices complete after 5.696 msecs [62718.356901] e1000e 0000:00:19.0: System wakeup disabled by ACPI [62718.357995] sd 0:0:0:0: [sda] Starting disk [62718.358688] rtc_cmos 00:02: System wakeup disabled by ACPI [62718.415684] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [62718.430682] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [62718.660661] usb 2-6: reset high-speed USB device number 2 using xhci_hcd [62718.680481] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [62718.684851] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [62718.684854] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [62718.687509] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [62718.706879] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [62718.706882] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [62718.709540] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [62718.720681] ata1.00: configured for UDMA/133 [62718.900614] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [62719.140702] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [62719.182936] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [62719.221790] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [62719.396757] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [62719.486485] PM: resume of devices complete after 1129.917 msecs [62719.486965] PM: Finishing wakeup. [62719.486967] Restarting tasks ... [62719.501294] Bluetooth: hci0: read Intel version: 370810011003110e00 [62719.529805] done. [62719.529892] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [62719.764305] e1000e: enp0s25 NIC Link is Down [62719.767007] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [62719.767973] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [62719.768716] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [62719.818384] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [62719.829440] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [62719.829950] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [62719.856304] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [62719.857540] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [62720.060658] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [62720.153638] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [62720.997457] wlp4s0: authenticate with 1c:b9:c4:16:2a:29 [62721.002869] wlp4s0: send auth to 1c:b9:c4:16:2a:29 (try 1/3) [62721.109805] wlp4s0: send auth to 1c:b9:c4:16:2a:29 (try 2/3) [62721.215752] wlp4s0: send auth to 1c:b9:c4:16:2a:29 (try 3/3) [62721.233723] wlp4s0: authenticated [62721.236579] wlp4s0: associate with 1c:b9:c4:16:2a:29 (try 1/3) [62721.258643] wlp4s0: RX AssocResp from 1c:b9:c4:16:2a:29 (capab=0x431 status=0 aid=17) [62721.259811] wlp4s0: associated [62721.259876] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [62744.636781] wlp4s0: authenticate with 1c:b9:c4:15:29:99 [62744.641662] wlp4s0: send auth to 1c:b9:c4:15:29:99 (try 1/3) [62744.651712] wlp4s0: authenticated [62744.652138] wlp4s0: associate with 1c:b9:c4:15:29:99 (try 1/3) [62744.665800] wlp4s0: RX AssocResp from 1c:b9:c4:15:29:99 (capab=0x431 status=0 aid=7) [62744.669567] wlp4s0: associated [67107.811115] wlp4s0: deauthenticating from 1c:b9:c4:15:29:99 by local choice (Reason: 3=DEAUTH_LEAVING) [67108.664063] PM: Syncing filesystems ... done. [67108.696445] PM: Preparing system for sleep (mem) [67108.697122] Freezing user space processes ... (elapsed 0.068 seconds) done. [67108.765907] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [67108.767434] PM: Suspending system (mem) [67108.767449] Suspending console(s) (use no_console_suspend to debug) [67108.916951] sd 0:0:0:0: [sda] Synchronizing SCSI cache [67108.917003] sd 0:0:0:0: [sda] Stopping disk [67109.146570] e1000e: EEE TX LPI TIMER: 00000011 [67109.234429] PM: suspend of devices complete after 466.823 msecs [67109.254400] PM: late suspend of devices complete after 19.941 msecs [67109.257125] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [67109.257252] e1000e 0000:00:19.0: System wakeup enabled by ACPI [67109.257264] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [67109.270784] PM: noirq suspend of devices complete after 16.380 msecs [67109.271056] ACPI: Preparing to enter system sleep state S3 [67109.390277] ACPI : EC: EC stopped [67109.390277] PM: Saving platform NVS memory [67109.390282] Disabling non-boot CPUs ... [67109.390559] Broke affinity for irq 23 [67109.390563] Broke affinity for irq 42 [67109.390568] Broke affinity for irq 46 [67109.391593] smpboot: CPU 1 is now offline [67109.402953] Broke affinity for irq 23 [67109.402957] Broke affinity for irq 42 [67109.402962] Broke affinity for irq 45 [67109.402965] Broke affinity for irq 46 [67109.402968] Broke affinity for irq 50 [67109.403992] smpboot: CPU 2 is now offline [67109.414792] Broke affinity for irq 1 [67109.414794] Broke affinity for irq 8 [67109.414796] Broke affinity for irq 9 [67109.414798] Broke affinity for irq 12 [67109.414801] Broke affinity for irq 23 [67109.414804] Broke affinity for irq 42 [67109.414808] Broke affinity for irq 45 [67109.414810] Broke affinity for irq 46 [67109.414812] Broke affinity for irq 50 [67109.415831] smpboot: CPU 3 is now offline [67109.431757] ACPI: Low-level resume complete [67109.431810] ACPI : EC: EC started [67109.431811] PM: Restoring platform NVS memory [67109.433995] microcode: CPU0 microcode updated early to revision 0x2b, date = 2018-03-22 [67109.434024] Enabling non-boot CPUs ... [67109.451821] x86: Booting SMP configuration: [67109.451822] smpboot: Booting Node 0 Processor 1 APIC 0x1 [67109.455330] cache: parent cpu1 should not be sleeping [67109.455398] CPU1 is up [67109.471852] smpboot: Booting Node 0 Processor 2 APIC 0x2 [67109.473064] microcode: CPU2 microcode updated early to revision 0x2b, date = 2018-03-22 [67109.476323] cache: parent cpu2 should not be sleeping [67109.476386] CPU2 is up [67109.495867] smpboot: Booting Node 0 Processor 3 APIC 0x3 [67109.499515] cache: parent cpu3 should not be sleeping [67109.499582] CPU3 is up [67109.502884] ACPI: Waking up from system sleep state S3 [67109.851041] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [67109.855325] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [67109.856813] PM: noirq resume of devices complete after 25.079 msecs [67109.863247] PM: early resume of devices complete after 6.399 msecs [67109.863479] e1000e 0000:00:19.0: System wakeup disabled by ACPI [67109.866469] rtc_cmos 00:02: System wakeup disabled by ACPI [67109.867182] sd 0:0:0:0: [sda] Starting disk [67109.922834] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [67109.937865] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [67109.953012] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [67110.183799] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [67110.184035] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [67110.188207] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [67110.188210] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [67110.190843] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [67110.210209] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [67110.210213] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [67110.212857] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [67110.224026] ata1.00: configured for UDMA/133 [67110.423945] usb 2-6: reset high-speed USB device number 2 using xhci_hcd [67110.664003] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [67110.688812] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [67110.726859] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [67110.864069] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [67110.953609] PM: resume of devices complete after 1090.321 msecs [67110.954109] PM: Finishing wakeup. [67110.954110] Restarting tasks ... [67110.977492] Bluetooth: hci0: read Intel version: 370810011003110e00 [67110.977501] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [67110.991738] done. [67111.070591] usb 2-4: new low-speed USB device number 61 using xhci_hcd [67111.255536] usb 2-4: New USB device found, idVendor=413c, idProduct=301a [67111.255540] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [67111.255542] usb 2-4: Product: Dell MS116 USB Optical Mouse [67111.255544] usb 2-4: Manufacturer: PixArt [67111.255697] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [67111.257538] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.0009/input/input25 [67111.257814] hid-generic 0003:413C:301A.0009: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0 [67111.267671] e1000e: enp0s25 NIC Link is Down [67111.270612] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [67111.271060] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [67111.271526] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [67111.293474] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [67111.327981] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [67111.337715] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [67111.338180] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [67111.366176] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [67111.367541] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [67111.571938] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [67111.665995] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [67112.519233] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [67112.525236] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [67112.578703] wlp4s0: authenticated [67112.579808] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [67112.598684] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=3) [67112.602481] wlp4s0: associated [67112.602569] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [69470.705651] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [71086.265653] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [71214.939346] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [71267.481820] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [71267.488716] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [71267.491352] wlp4s0: authenticated [71267.491666] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [71267.498485] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=11) [71267.499355] wlp4s0: associated [71747.701418] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [71747.707984] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [71747.822596] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 2/3) [71747.877431] wlp4s0: authenticated [71747.880886] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [71747.901616] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=3) [71747.912014] wlp4s0: associated [73596.037228] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [78070.950819] perf interrupt took too long (5002 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [78827.591224] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [78827.595889] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [78827.597524] wlp4s0: authenticated [78827.599504] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [78827.607975] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=7) [78827.611949] wlp4s0: associated [79067.635048] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [79067.639513] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [79067.747996] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 2/3) [79067.773281] wlp4s0: authenticated [79067.774713] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [79067.788162] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=4) [79067.804672] wlp4s0: associated [80081.116319] wlp4s0: deauthenticating from 34:8f:27:1a:e3:99 by local choice (Reason: 3=DEAUTH_LEAVING) [80081.902997] PM: Syncing filesystems ... done. [80081.946461] PM: Preparing system for sleep (mem) [80081.947011] Freezing user space processes ... (elapsed 0.025 seconds) done. [80081.972723] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [80081.974240] PM: Suspending system (mem) [80081.974256] Suspending console(s) (use no_console_suspend to debug) [80082.125011] sd 0:0:0:0: [sda] Synchronizing SCSI cache [80082.125055] sd 0:0:0:0: [sda] Stopping disk [80082.352484] e1000e: EEE TX LPI TIMER: 00000011 [80082.439871] PM: suspend of devices complete after 465.525 msecs [80082.460183] PM: late suspend of devices complete after 20.300 msecs [80082.462903] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [80082.462998] e1000e 0000:00:19.0: System wakeup enabled by ACPI [80082.463040] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [80082.476529] PM: noirq suspend of devices complete after 16.345 msecs [80082.476801] ACPI: Preparing to enter system sleep state S3 [80082.596058] ACPI : EC: EC stopped [80082.596058] PM: Saving platform NVS memory [80082.596063] Disabling non-boot CPUs ... [80082.596380] Broke affinity for irq 45 [80082.597407] smpboot: CPU 1 is now offline [80082.608915] Broke affinity for irq 45 [80082.608919] Broke affinity for irq 46 [80082.609959] smpboot: CPU 2 is now offline [80082.621351] Broke affinity for irq 1 [80082.621356] Broke affinity for irq 8 [80082.621360] Broke affinity for irq 9 [80082.621365] Broke affinity for irq 12 [80082.621371] Broke affinity for irq 23 [80082.621377] Broke affinity for irq 42 [80082.621385] Broke affinity for irq 45 [80082.621390] Broke affinity for irq 46 [80082.621396] Broke affinity for irq 50 [80082.622458] smpboot: CPU 3 is now offline [80082.638240] ACPI: Low-level resume complete [80082.638294] ACPI : EC: EC started [80082.638294] PM: Restoring platform NVS memory [80082.640451] microcode: CPU0 microcode updated early to revision 0x2b, date = 2018-03-22 [80082.640501] Enabling non-boot CPUs ... [80082.657937] x86: Booting SMP configuration: [80082.657938] smpboot: Booting Node 0 Processor 1 APIC 0x1 [80082.661458] cache: parent cpu1 should not be sleeping [80082.661527] CPU1 is up [80082.677957] smpboot: Booting Node 0 Processor 2 APIC 0x2 [80082.679269] microcode: CPU2 microcode updated early to revision 0x2b, date = 2018-03-22 [80082.682542] cache: parent cpu2 should not be sleeping [80082.682606] CPU2 is up [80082.701975] smpboot: Booting Node 0 Processor 3 APIC 0x3 [80082.705667] cache: parent cpu3 should not be sleeping [80082.705739] CPU3 is up [80082.708994] ACPI: Waking up from system sleep state S3 [80083.055002] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [80083.058899] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [80083.060237] PM: noirq resume of devices complete after 22.468 msecs [80083.066093] PM: early resume of devices complete after 5.838 msecs [80083.066333] e1000e 0000:00:19.0: System wakeup disabled by ACPI [80083.068047] rtc_cmos 00:02: System wakeup disabled by ACPI [80083.070241] sd 0:0:0:0: [sda] Starting disk [80083.124918] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [80083.139991] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [80083.155046] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [80083.170149] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [80083.389794] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [80083.393980] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [80083.394122] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [80083.394125] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [80083.396779] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [80083.416204] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [80083.416207] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [80083.418865] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [80083.430039] ata1.00: configured for UDMA/133 [80083.689947] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [80083.890443] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [80083.928425] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [80083.929932] usb 2-6: reset high-speed USB device number 2 using xhci_hcd [80084.337857] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [80084.427758] PM: resume of devices complete after 1361.832 msecs [80084.428337] PM: Finishing wakeup. [80084.428338] Restarting tasks ... [80084.432984] usb 2-4: USB disconnect, device number 61 [80084.438999] done. [80084.451801] Bluetooth: hci0: read Intel version: 370810011003110e00 [80084.451869] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [80084.641731] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [80084.769785] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [80084.998883] e1000e: enp0s25 NIC Link is Down [80085.001452] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [80085.002084] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [80085.002660] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [80085.063524] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [80085.063990] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [80085.093696] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [80085.096046] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [80085.297655] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [80085.382986] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [80086.226436] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [80086.231405] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [80086.338902] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 2/3) [80086.346508] wlp4s0: authenticated [80086.349353] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [80086.365054] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=6) [80086.367571] wlp4s0: associated [80086.367647] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [80109.649810] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [80109.654080] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [80109.667714] wlp4s0: authenticated [80109.670597] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [80109.677705] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=1) [80109.679148] wlp4s0: associated [81457.589605] usb 2-4: new low-speed USB device number 62 using xhci_hcd [81457.721677] usb 2-4: New USB device found, idVendor=413c, idProduct=301a [81457.721681] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [81457.721683] usb 2-4: Product: Dell MS116 USB Optical Mouse [81457.721685] usb 2-4: Manufacturer: PixArt [81457.721911] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [81457.723965] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.000A/input/input26 [81457.724234] hid-generic 0003:413C:301A.000A: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0 [81768.937276] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [81841.745656] wlp4s0: authenticate with 34:8f:27:1a:f0:d9 [81841.749709] wlp4s0: send auth to 34:8f:27:1a:f0:d9 (try 1/3) [81841.751232] wlp4s0: authenticated [81841.756132] wlp4s0: associate with 34:8f:27:1a:f0:d9 (try 1/3) [81841.763306] wlp4s0: RX AssocResp from 34:8f:27:1a:f0:d9 (capab=0x431 status=0 aid=4) [81841.764290] wlp4s0: associated [81961.594759] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [81961.599645] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [81961.601193] wlp4s0: authenticated [81961.607682] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [81961.618785] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=1) [81961.619942] wlp4s0: associated [83951.049379] wlp4s0: deauthenticating from 34:8f:27:1a:e3:99 by local choice (Reason: 3=DEAUTH_LEAVING) [83951.404458] wlp4s0: authenticate with 34:8f:27:1a:ef:39 [83951.409727] wlp4s0: send auth to 34:8f:27:1a:ef:39 (try 1/3) [83951.516164] wlp4s0: send auth to 34:8f:27:1a:ef:39 (try 2/3) [83951.522300] wlp4s0: authenticated [83951.526426] wlp4s0: associate with 34:8f:27:1a:ef:39 (try 1/3) [83951.535868] wlp4s0: RX AssocResp from 34:8f:27:1a:ef:39 (capab=0x431 status=0 aid=4) [83951.537945] wlp4s0: associated [83951.822935] iwlwifi 0000:04:00.0: No association and the time event is over already... [83951.822951] wlp4s0: Connection to AP 34:8f:27:1a:ef:39 lost [83952.080797] wlp4s0: authenticate with 34:8f:27:1a:e3:e9 [83952.086268] wlp4s0: send auth to 34:8f:27:1a:e3:e9 (try 1/3) [83952.192246] wlp4s0: send auth to 34:8f:27:1a:e3:e9 (try 2/3) [83952.298376] wlp4s0: send auth to 34:8f:27:1a:e3:e9 (try 3/3) [83952.402487] wlp4s0: authentication with 34:8f:27:1a:e3:e9 timed out [83952.889410] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [83952.895355] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [83952.901862] wlp4s0: authenticated [83952.902466] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [83952.923332] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=1) [83952.926690] wlp4s0: associated [84472.806598] systemd-sysv-generator[24144]: stat() failed on /etc/init.d/nexus, ignoring: No such file or directory [84477.833995] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [84510.267595] systemd-sysv-generator[24208]: stat() failed on /etc/init.d/nexus, ignoring: No such file or directory [84550.516715] usb 2-4: USB disconnect, device number 62 [84619.270828] systemd-sysv-generator[25598]: stat() failed on /etc/init.d/nexus, ignoring: No such file or directory [84675.792928] wlp4s0: deauthenticating from 34:8f:27:1a:e3:99 by local choice (Reason: 3=DEAUTH_LEAVING) [84676.695738] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [84676.728084] PM: Syncing filesystems ... done. [84676.763317] PM: Preparing system for sleep (mem) [84676.763850] Freezing user space processes ... (elapsed 0.024 seconds) done. [84676.787991] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [84676.789593] PM: Suspending system (mem) [84676.789609] Suspending console(s) (use no_console_suspend to debug) [84676.940686] sd 0:0:0:0: [sda] Synchronizing SCSI cache [84676.940722] sd 0:0:0:0: [sda] Stopping disk [84677.171803] e1000e: EEE TX LPI TIMER: 00000011 [84677.259273] PM: suspend of devices complete after 469.524 msecs [84677.279454] PM: late suspend of devices complete after 20.176 msecs [84677.282157] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [84677.282260] e1000e 0000:00:19.0: System wakeup enabled by ACPI [84677.282312] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [84677.295826] PM: noirq suspend of devices complete after 16.369 msecs [84677.296097] ACPI: Preparing to enter system sleep state S3 [84677.415350] ACPI : EC: EC stopped [84677.415350] PM: Saving platform NVS memory [84677.415355] Disabling non-boot CPUs ... [84677.415600] Broke affinity for irq 45 [84677.416623] smpboot: CPU 1 is now offline [84677.431948] Broke affinity for irq 45 [84677.431952] Broke affinity for irq 46 [84677.432969] smpboot: CPU 2 is now offline [84677.443980] Broke affinity for irq 1 [84677.443985] Broke affinity for irq 8 [84677.443990] Broke affinity for irq 9 [84677.443994] Broke affinity for irq 12 [84677.444000] Broke affinity for irq 23 [84677.444006] Broke affinity for irq 42 [84677.444015] Broke affinity for irq 45 [84677.444020] Broke affinity for irq 46 [84677.444025] Broke affinity for irq 50 [84677.445077] smpboot: CPU 3 is now offline [84677.461664] ACPI: Low-level resume complete [84677.461717] ACPI : EC: EC started [84677.461718] PM: Restoring platform NVS memory [84677.463877] microcode: CPU0 microcode updated early to revision 0x2b, date = 2018-03-22 [84677.463931] Enabling non-boot CPUs ... [84677.481305] x86: Booting SMP configuration: [84677.481306] smpboot: Booting Node 0 Processor 1 APIC 0x1 [84677.484910] cache: parent cpu1 should not be sleeping [84677.484977] CPU1 is up [84677.501347] smpboot: Booting Node 0 Processor 2 APIC 0x2 [84677.502658] microcode: CPU2 microcode updated early to revision 0x2b, date = 2018-03-22 [84677.505908] cache: parent cpu2 should not be sleeping [84677.505975] CPU2 is up [84677.525349] smpboot: Booting Node 0 Processor 3 APIC 0x3 [84677.528971] cache: parent cpu3 should not be sleeping [84677.529043] CPU3 is up [84677.532342] ACPI: Waking up from system sleep state S3 [84677.879937] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [84677.883812] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [84677.883896] PM: noirq resume of devices complete after 22.707 msecs [84677.889402] PM: early resume of devices complete after 5.470 msecs [84677.889626] e1000e 0000:00:19.0: System wakeup disabled by ACPI [84677.892280] rtc_cmos 00:02: System wakeup disabled by ACPI [84677.893496] sd 0:0:0:0: [sda] Starting disk [84677.948214] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [84677.963214] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [84677.978262] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [84678.205237] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [84678.205505] usb 2-6: reset high-speed USB device number 2 using xhci_hcd [84678.209604] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [84678.209607] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [84678.212262] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [84678.231626] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [84678.231629] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [84678.234284] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [84678.245454] ata1.00: configured for UDMA/133 [84678.445478] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [84678.709399] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [84678.741487] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [84678.747276] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [84678.997462] usb 2-6.1: reset full-speed USB device number 4 using xhci_hcd [84679.087267] PM: resume of devices complete after 1197.882 msecs [84679.087703] PM: Finishing wakeup. [84679.087705] Restarting tasks ... done. [84679.115282] Bluetooth: hci0: read Intel version: 370810011003110e00 [84679.115290] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [84679.254997] usb 2-4: new low-speed USB device number 63 using xhci_hcd [84679.361172] e1000e: enp0s25 NIC Link is Down [84679.364743] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [84679.365305] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [84679.365765] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [84679.388842] usb 2-4: New USB device found, idVendor=413c, idProduct=301a [84679.388846] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [84679.388848] usb 2-4: Product: Dell MS116 USB Optical Mouse [84679.388850] usb 2-4: Manufacturer: PixArt [84679.389027] usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [84679.391012] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.000B/input/input27 [84679.391377] hid-generic 0003:413C:301A.000B: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0 [84679.426293] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [84679.427281] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [84679.427845] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [84679.448447] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [84679.449709] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [84679.653355] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [84679.728612] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [84680.293384] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [84680.574072] wlp4s0: authenticate with 34:8f:27:1a:e3:99 [84680.579385] wlp4s0: send auth to 34:8f:27:1a:e3:99 (try 1/3) [84680.583023] wlp4s0: authenticated [84680.585116] wlp4s0: associate with 34:8f:27:1a:e3:99 (try 1/3) [84680.615148] wlp4s0: RX AssocResp from 34:8f:27:1a:e3:99 (capab=0x431 status=0 aid=1) [84680.620173] wlp4s0: associated [84680.620233] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [84732.900527] systemd-sysv-generator[28251]: stat() failed on /etc/init.d/nexus, ignoring: No such file or directory [84733.194319] systemd-sysv-generator[28284]: stat() failed on /etc/init.d/nexus, ignoring: No such file or directory [84737.540042] systemd-sysv-generator[32432]: stat() failed on /etc/init.d/nexus, ignoring: No such file or directory