[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096400 (usable) [ 0.000000] BIOS-e820: 0000000000096400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-E3FFF write-protect [ 0.000000] E4000-E7FFF write-through [ 0.000000] E8000-EBFFF write-protect [ 0.000000] EC000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000096400 (usable) [ 0.000000] modified: 0000000000096400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] modified: 00000000bf780000 - 00000000bf78e000 (ACPI data) [ 0.000000] modified: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] modified: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] modified: 00000000bf7ed000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffa00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37815000 - 37fef5da [ 0.000000] Allocated new RAMDISK: 008ad000 - 010875da [ 0.000000] Move RAMDISK from 0000000037815000 - 0000000037fef5d9 to 008ad000 - 010875d9 [ 0.000000] ACPI: RSDP 000f9d60 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT bf780100 00064 (v01 HPQOEM SLIC-CPC 20090917 MSFT 00000097) [ 0.000000] ACPI: FACP bf780290 000F4 (v04 HPQOEM SLIC-CPC 20090917 MSFT 00000097) [ 0.000000] ACPI: DSDT bf7805e0 05AB5 (v02 HPQOEM SLIC-CPC 00000007 INTL 20051117) [ 0.000000] ACPI: FACS bf78e000 00040 [ 0.000000] ACPI: APIC bf780390 0008C (v02 HPQOEM SLIC-CPC 20090917 MSFT 00000097) [ 0.000000] ACPI: MCFG bf780420 0003C (v01 HPQOEM SLIC-CPC 20090917 MSFT 00000097) [ 0.000000] ACPI: SLIC bf780460 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001) [ 0.000000] ACPI: OEMB bf78e040 00072 (v01 HPQOEM SLIC-CPC 20090917 MSFT 00000097) [ 0.000000] ACPI: HPET bf78a680 00038 (v01 HPQOEM SLIC-CPC 20090917 MSFT 00000097) [ 0.000000] ACPI: GSCI bf78e0c0 02024 (v01 HPQOEM SLIC-CPC 20090917 MSFT 00000097) [ 0.000000] ACPI: SSDT bf792bc0 00363 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2175MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [0000096400 - 0000100000] BIOS reserved ==> [0000096400 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac74c] BRK ==> [00008a9000 - 00008ac74c] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008ad000 - 00010875da] NEW RAMDISK ==> [00008ad000 - 00010875da] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bf780 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000096 [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] On node 0 totalpages: 784134 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1088200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3942 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4352 pages used for memmap [ 0.000000] HighMem zone: 552578 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000096000 - 0000000000097000 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2888000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778006 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-14-generic root=UUID=07130b41-8658-4bd1-a7de-6b0528a1d170 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15684800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf780) [ 0.000000] Memory: 3078624k/3137024k available (4565k kernel code, 57060k reserved, 2143k data, 540k init, 2227720k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:472 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2793.142 MHz processor. [ 0.001389] Console: colour VGA+ 80x25 [ 0.001392] console [tty0] enabled [ 0.001505] hpet clockevent registered [ 0.001510] alloc irq_desc for 24 on node 0 [ 0.001512] alloc kstat_irqs on node 0 [ 0.001517] alloc irq_desc for 25 on node 0 [ 0.001518] alloc kstat_irqs on node 0 [ 0.001521] alloc irq_desc for 26 on node 0 [ 0.001522] alloc kstat_irqs on node 0 [ 0.001526] alloc irq_desc for 27 on node 0 [ 0.001527] alloc kstat_irqs on node 0 [ 0.001530] alloc irq_desc for 28 on node 0 [ 0.001531] alloc kstat_irqs on node 0 [ 0.001534] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.001538] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.28 BogoMIPS (lpj=11172568) [ 0.001549] Security Framework initialized [ 0.001561] AppArmor: AppArmor initialized [ 0.001566] Mount-cache hash table entries: 512 [ 0.001645] Initializing cgroup subsys ns [ 0.001648] Initializing cgroup subsys cpuacct [ 0.001651] Initializing cgroup subsys memory [ 0.001655] Initializing cgroup subsys freezer [ 0.001657] Initializing cgroup subsys net_cls [ 0.001665] CPU: Physical Processor ID: 0 [ 0.001666] CPU: Processor Core ID: 0 [ 0.001669] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001671] CPU: L2 cache: 256K [ 0.001672] CPU: L3 cache: 8192K [ 0.001675] mce: CPU supports 9 MCE banks [ 0.001686] CPU0: Thermal monitoring enabled (TM1) [ 0.001690] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 [ 0.001698] using mwait in idle threads. [ 0.001701] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. [ 0.001706] ... version: 3 [ 0.001708] ... bit width: 48 [ 0.001709] ... generic counters: 4 [ 0.001710] ... value mask: 0000ffffffffffff [ 0.001712] ... max period: 000000007fffffff [ 0.001713] ... fixed-purpose counters: 3 [ 0.001715] ... counter mask: 000000070000000f [ 0.001718] Checking 'hlt' instruction... OK. [ 0.019431] ACPI: Core revision 20090521 [ 0.047853] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.087471] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.193285] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.203762] Initializing CPU#1 [ 0.281038] Calibrating delay using timer specific routine.. 5585.94 BogoMIPS (lpj=11171881) [ 0.281045] CPU: Physical Processor ID: 0 [ 0.281047] CPU: Processor Core ID: 1 [ 0.281049] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.281050] CPU: L2 cache: 256K [ 0.281051] CPU: L3 cache: 8192K [ 0.281054] mce: CPU supports 9 MCE banks [ 0.281064] CPU1: Thermal monitoring enabled (TM1) [ 0.281067] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.282011] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.282900] CPU1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.282912] Skipping synchronization checks as TSC is reliable. [ 0.282987] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.295052] Initializing CPU#2 [ 0.372880] Calibrating delay using timer specific routine.. 5586.05 BogoMIPS (lpj=11172110) [ 0.372887] CPU: Physical Processor ID: 0 [ 0.372888] CPU: Processor Core ID: 2 [ 0.372890] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.372892] CPU: L2 cache: 256K [ 0.372893] CPU: L3 cache: 8192K [ 0.372895] mce: CPU supports 9 MCE banks [ 0.372905] CPU2: Thermal monitoring enabled (TM1) [ 0.372908] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.373850] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.374765] CPU2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.374780] Skipping synchronization checks as TSC is reliable. [ 0.374852] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.386811] Initializing CPU#3 [ 0.464722] Calibrating delay using timer specific routine.. 5586.13 BogoMIPS (lpj=11172265) [ 0.464729] CPU: Physical Processor ID: 0 [ 0.464730] CPU: Processor Core ID: 3 [ 0.464732] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.464733] CPU: L2 cache: 256K [ 0.464734] CPU: L3 cache: 8192K [ 0.464737] mce: CPU supports 9 MCE banks [ 0.464746] CPU3: Thermal monitoring enabled (TM1) [ 0.464750] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.465667] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.466521] CPU3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.466538] Skipping synchronization checks as TSC is reliable. [ 0.466613] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.476754] Initializing CPU#4 [ 0.556564] Calibrating delay using timer specific routine.. 5586.03 BogoMIPS (lpj=11172067) [ 0.556571] CPU: Physical Processor ID: 0 [ 0.556572] CPU: Processor Core ID: 0 [ 0.556574] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.556575] CPU: L2 cache: 256K [ 0.556576] CPU: L3 cache: 8192K [ 0.556579] mce: CPU supports 9 MCE banks [ 0.556587] CPU4: Thermal monitoring enabled (TM1) [ 0.556590] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.557412] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.558238] CPU4: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.558256] Skipping synchronization checks as TSC is reliable. [ 0.558327] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.570199] Initializing CPU#5 [ 0.648405] Calibrating delay using timer specific routine.. 5586.00 BogoMIPS (lpj=11172000) [ 0.648411] CPU: Physical Processor ID: 0 [ 0.648412] CPU: Processor Core ID: 1 [ 0.648414] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.648415] CPU: L2 cache: 256K [ 0.648416] CPU: L3 cache: 8192K [ 0.648418] mce: CPU supports 9 MCE banks [ 0.648426] CPU5: Thermal monitoring enabled (TM1) [ 0.648428] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.649269] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.650106] CPU5: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.650121] Skipping synchronization checks as TSC is reliable. [ 0.650188] Booting processor 6 APIC 0x5 ip 0x6000 [ 0.661938] Initializing CPU#6 [ 0.740247] Calibrating delay using timer specific routine.. 5586.06 BogoMIPS (lpj=11172133) [ 0.740253] CPU: Physical Processor ID: 0 [ 0.740254] CPU: Processor Core ID: 2 [ 0.740255] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.740257] CPU: L2 cache: 256K [ 0.740257] CPU: L3 cache: 8192K [ 0.740260] mce: CPU supports 9 MCE banks [ 0.740267] CPU6: Thermal monitoring enabled (TM1) [ 0.740270] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.741108] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.741947] CPU6: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.741962] Skipping synchronization checks as TSC is reliable. [ 0.742028] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.752163] Initializing CPU#7 [ 0.832089] Calibrating delay using timer specific routine.. 5586.04 BogoMIPS (lpj=11172085) [ 0.832095] CPU: Physical Processor ID: 0 [ 0.832095] CPU: Processor Core ID: 3 [ 0.832169] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.832170] CPU: L2 cache: 256K [ 0.832171] CPU: L3 cache: 8192K [ 0.832173] mce: CPU supports 9 MCE banks [ 0.832181] CPU7: Thermal monitoring enabled (TM1) [ 0.832183] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.833013] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.833871] CPU7: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.833885] Skipping synchronization checks as TSC is reliable. [ 0.833901] Brought up 8 CPUs [ 0.833902] Total of 8 processors activated (44688.55 BogoMIPS). [ 0.833916] CPU0 attaching sched-domain: [ 0.833918] domain 0: span 0,4 level SIBLING [ 0.833920] groups: 0 4 [ 0.833922] domain 1: span 0-7 level MC [ 0.833924] groups: 0,4 1,5 2,6 3,7 [ 0.833928] CPU1 attaching sched-domain: [ 0.833929] domain 0: span 1,5 level SIBLING [ 0.833931] groups: 1 5 [ 0.833933] domain 1: span 0-7 level MC [ 0.833935] groups: 1,5 2,6 3,7 0,4 [ 0.833938] CPU2 attaching sched-domain: [ 0.833940] domain 0: span 2,6 level SIBLING [ 0.833941] groups: 2 6 [ 0.833943] domain 1: span 0-7 level MC [ 0.833945] groups: 2,6 3,7 0,4 1,5 [ 0.833948] CPU3 attaching sched-domain: [ 0.833950] domain 0: span 3,7 level SIBLING [ 0.833951] groups: 3 7 [ 0.833953] domain 1: span 0-7 level MC [ 0.833955] groups: 3,7 0,4 1,5 2,6 [ 0.833958] CPU4 attaching sched-domain: [ 0.833960] domain 0: span 0,4 level SIBLING [ 0.833961] groups: 4 0 [ 0.833963] domain 1: span 0-7 level MC [ 0.833965] groups: 0,4 1,5 2,6 3,7 [ 0.833968] CPU5 attaching sched-domain: [ 0.833970] domain 0: span 1,5 level SIBLING [ 0.833971] groups: 5 1 [ 0.833973] domain 1: span 0-7 level MC [ 0.833975] groups: 1,5 2,6 3,7 0,4 [ 0.833978] CPU6 attaching sched-domain: [ 0.833980] domain 0: span 2,6 level SIBLING [ 0.833981] groups: 6 2 [ 0.833983] domain 1: span 0-7 level MC [ 0.833985] groups: 2,6 3,7 0,4 1,5 [ 0.833988] CPU7 attaching sched-domain: [ 0.833990] domain 0: span 3,7 level SIBLING [ 0.833991] groups: 7 3 [ 0.833993] domain 1: span 0-7 level MC [ 0.833995] groups: 3,7 0,4 1,5 2,6 [ 0.834326] Booting paravirtualized kernel on bare hardware [ 0.834459] regulator: core version 0.5 [ 0.834482] Time: 23:00:42 Date: 11/11/09 [ 0.834512] NET: Registered protocol family 16 [ 0.834581] EISA bus registered [ 0.834586] ACPI: bus type pci registered [ 0.834627] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.834629] PCI: Not using MMCONFIG. [ 0.834707] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.834708] PCI: Using configuration type 1 for base access [ 0.835341] bio: create slab at 0 [ 0.835989] ACPI: EC: Look up EC in DSDT [ 0.841816] ACPI: Interpreter enabled [ 0.841820] ACPI: (supports S0 S1 S3 S4 S5) [ 0.841835] ACPI: Using IOAPIC for interrupt routing [ 0.841872] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.842998] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.842999] PCI: Using MMCONFIG for extended config space [ 0.849156] ACPI: No dock devices found. [ 0.849262] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.849353] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.849356] pci 0000:00:03.0: PME# disabled [ 0.849598] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfbbfc000-0xfbbfc3ff] [ 0.849647] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.849651] pci 0000:00:1a.0: PME# disabled [ 0.849686] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbbf8000-0xfbbfbfff] [ 0.849722] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.849725] pci 0000:00:1b.0: PME# disabled [ 0.849778] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.849781] pci 0000:00:1c.0: PME# disabled [ 0.849832] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.849835] pci 0000:00:1c.2: PME# disabled [ 0.849886] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.849889] pci 0000:00:1c.3: PME# disabled [ 0.849937] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfbbf6000-0xfbbf63ff] [ 0.849986] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.849989] pci 0000:00:1d.0: PME# disabled [ 0.850150] pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07] [ 0.850154] pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883] [ 0.850159] pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807] [ 0.850164] pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483] [ 0.850168] pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb41f] [ 0.850173] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbbf4000-0xfbbf47ff] [ 0.850201] pci 0000:00:1f.2: PME# supported from D3hot [ 0.850203] pci 0000:00:1f.2: PME# disabled [ 0.850227] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbbff800-0xfbbff8ff] [ 0.850239] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.850279] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.850287] pci 0000:01:00.0: reg 18 64bit mmio: [0xfbcf0000-0xfbcfffff] [ 0.850291] pci 0000:01:00.0: reg 20 io port: [0xc000-0xc0ff] [ 0.850299] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbcc0000-0xfbcdffff] [ 0.850316] pci 0000:01:00.0: supports D1 D2 [ 0.850344] pci 0000:01:00.1: reg 10 64bit mmio: [0xfbcec000-0xfbceffff] [ 0.850376] pci 0000:01:00.1: supports D1 D2 [ 0.850402] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] [ 0.850405] pci 0000:00:03.0: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] [ 0.850409] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.850451] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff] [ 0.850469] pci 0000:02:00.0: reg 18 64bit mmio: [0xfbdff000-0xfbdfffff] [ 0.850482] pci 0000:02:00.0: reg 20 64bit mmio: [0xfaffc000-0xfaffffff] [ 0.850489] pci 0000:02:00.0: reg 30 32bit mmio: [0xfbdc0000-0xfbddffff] [ 0.850526] pci 0000:02:00.0: supports D1 D2 [ 0.850527] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.850532] pci 0000:02:00.0: PME# disabled [ 0.850582] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] [ 0.850585] pci 0000:00:1c.0: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 0.850590] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff] [ 0.850638] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbeff800-0xfbefffff] [ 0.850645] pci 0000:03:00.0: reg 18 io port: [0xe800-0xe8ff] [ 0.850699] pci 0000:03:00.0: supports D2 [ 0.850700] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold [ 0.850704] pci 0000:03:00.0: PME# disabled [ 0.850748] pci 0000:00:1c.2: bridge io port: [0xe000-0xefff] [ 0.850751] pci 0000:00:1c.2: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.850802] pci 0000:04:00.0: reg 10 64bit mmio: [0xfbff0000-0xfbffffff] [ 0.850864] pci 0000:04:00.0: supports D1 [ 0.850865] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.850869] pci 0000:04:00.0: PME# disabled [ 0.850920] pci 0000:00:1c.3: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.850964] pci 0000:00:1e.0: transparent bridge [ 0.850988] pci_bus 0000:00: on NUMA node 0 [ 0.850991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.851140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] [ 0.851211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 0.851257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT] [ 0.851296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT] [ 0.862958] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.863042] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.863121] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.863203] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.863285] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.863367] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.863450] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.863531] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.863647] SCSI subsystem initialized [ 0.863744] libata version 3.00 loaded. [ 0.863791] usbcore: registered new interface driver usbfs [ 0.863800] usbcore: registered new interface driver hub [ 0.863815] usbcore: registered new device driver usb [ 0.863886] ACPI: WMI: Mapper loaded [ 0.863887] PCI: Using ACPI for IRQ routing [ 0.873736] Bluetooth: Core ver 2.15 [ 0.873774] NET: Registered protocol family 31 [ 0.873777] Bluetooth: HCI device and connection manager initialized [ 0.873780] Bluetooth: HCI socket layer initialized [ 0.873782] NetLabel: Initializing [ 0.873785] NetLabel: domain hash size = 128 [ 0.873787] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.873803] NetLabel: unlabeled traffic allowed by default [ 0.873843] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 0.873848] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.876040] hpet: hpet2 irq 24 for MSI [ 0.877930] hpet: hpet3 irq 25 for MSI [ 0.881959] hpet: hpet4 irq 26 for MSI [ 0.885867] hpet: hpet5 irq 27 for MSI [ 0.889729] hpet: hpet6 irq 28 for MSI [ 0.900040] Switched to high resolution mode on CPU 0 [ 0.901729] Switched to high resolution mode on CPU 5 [ 0.901735] Switched to high resolution mode on CPU 4 [ 0.901741] Switched to high resolution mode on CPU 6 [ 0.901810] Switched to high resolution mode on CPU 7 [ 0.901860] Switched to high resolution mode on CPU 3 [ 0.901912] Switched to high resolution mode on CPU 1 [ 0.901946] Switched to high resolution mode on CPU 2 [ 0.913020] pnp: PnP ACPI init [ 0.913032] ACPI: bus type pnp registered [ 0.914417] pnp: PnP ACPI: found 12 devices [ 0.914419] ACPI: ACPI bus type pnp unregistered [ 0.914420] PnPBIOS: Disabled by ACPI PNP [ 0.914426] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 0.914428] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 0.914430] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 0.914432] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.914436] system 00:06: ioport range 0xa00-0xa0f has been reserved [ 0.914440] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.914442] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.914443] system 00:07: ioport range 0x500-0x57f has been reserved [ 0.914445] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.914447] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.914449] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.914453] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.914455] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.914462] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.914465] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.914467] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 0.914469] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.914471] system 00:0b: iomem range 0x100000-0xbfffffff could not be reserved [ 0.914473] system 00:0b: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.948988] AppArmor: AppArmor Filesystem Enabled [ 0.949024] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 0.949026] pci 0000:00:03.0: IO window: 0xc000-0xcfff [ 0.949029] pci 0000:00:03.0: MEM window: 0xfbc00000-0xfbcfffff [ 0.949032] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.949036] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.949039] pci 0000:00:1c.0: IO window: 0xd000-0xdfff [ 0.949042] pci 0000:00:1c.0: MEM window: 0xfbd00000-0xfbdfffff [ 0.949046] pci 0000:00:1c.0: PREFETCH window: 0x000000faf00000-0x000000faffffff [ 0.949050] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 0.949053] pci 0000:00:1c.2: IO window: 0xe000-0xefff [ 0.949057] pci 0000:00:1c.2: MEM window: 0xfbe00000-0xfbefffff [ 0.949059] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.949062] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 [ 0.949064] pci 0000:00:1c.3: IO window: disabled [ 0.949067] pci 0000:00:1c.3: MEM window: 0xfbf00000-0xfbffffff [ 0.949070] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.949073] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.949075] pci 0000:00:1e.0: IO window: disabled [ 0.949078] pci 0000:00:1e.0: MEM window: disabled [ 0.949081] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.949088] alloc irq_desc for 16 on node -1 [ 0.949089] alloc kstat_irqs on node -1 [ 0.949093] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.949096] pci 0000:00:03.0: setting latency timer to 64 [ 0.949101] alloc irq_desc for 17 on node -1 [ 0.949102] alloc kstat_irqs on node -1 [ 0.949105] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.949108] pci 0000:00:1c.0: setting latency timer to 64 [ 0.949113] alloc irq_desc for 18 on node -1 [ 0.949114] alloc kstat_irqs on node -1 [ 0.949117] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.949120] pci 0000:00:1c.2: setting latency timer to 64 [ 0.949125] alloc irq_desc for 19 on node -1 [ 0.949126] alloc kstat_irqs on node -1 [ 0.949129] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.949132] pci 0000:00:1c.3: setting latency timer to 64 [ 0.949137] pci 0000:00:1e.0: setting latency timer to 64 [ 0.949139] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.949141] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.949143] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.949144] pci_bus 0000:01: resource 1 mem: [0xfbc00000-0xfbcfffff] [ 0.949146] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.949148] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.949150] pci_bus 0000:02: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 0.949151] pci_bus 0000:02: resource 2 pref mem [0xfaf00000-0xfaffffff] [ 0.949153] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.949155] pci_bus 0000:03: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.949156] pci_bus 0000:04: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.949158] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.949160] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] [ 0.949181] NET: Registered protocol family 2 [ 0.949236] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.949393] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.949916] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.950177] TCP: Hash tables configured (established 131072 bind 65536) [ 0.950178] TCP reno registered [ 0.950223] NET: Registered protocol family 1 [ 0.950251] Trying to unpack rootfs image as initramfs... [ 1.101587] Freeing initrd memory: 8041k freed [ 1.103033] cpufreq-nforce2: No nForce2 chipset. [ 1.103049] Scanning for low memory corruption every 60 seconds [ 1.103108] audit: initializing netlink socket (disabled) [ 1.103116] type=2000 audit(1257980442.973:1): initialized [ 1.109473] highmem bounce pool size: 64 pages [ 1.109476] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.110392] VFS: Disk quotas dquot_6.5.2 [ 1.110427] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.110753] fuse init (API version 7.12) [ 1.110803] msgmni has been set to 1679 [ 1.110988] alg: No test for stdrng (krng) [ 1.110995] io scheduler noop registered [ 1.110997] io scheduler anticipatory registered [ 1.110998] io scheduler deadline registered [ 1.111026] io scheduler cfq registered (default) [ 1.111067] pci 0000:01:00.0: Boot video device [ 1.111145] alloc irq_desc for 29 on node -1 [ 1.111146] alloc kstat_irqs on node -1 [ 1.111153] pcieport-driver 0000:00:03.0: irq 29 for MSI/MSI-X [ 1.111158] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 1.111236] alloc irq_desc for 30 on node -1 [ 1.111237] alloc kstat_irqs on node -1 [ 1.111243] pcieport-driver 0000:00:1c.0: irq 30 for MSI/MSI-X [ 1.111249] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.111331] alloc irq_desc for 31 on node -1 [ 1.111332] alloc kstat_irqs on node -1 [ 1.111337] pcieport-driver 0000:00:1c.2: irq 31 for MSI/MSI-X [ 1.111344] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.111426] alloc irq_desc for 32 on node -1 [ 1.111427] alloc kstat_irqs on node -1 [ 1.111432] pcieport-driver 0000:00:1c.3: irq 32 for MSI/MSI-X [ 1.111438] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.111497] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.111503] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.111564] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.111637] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.111639] ACPI: Power Button [PWRF] [ 1.111674] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.111677] ACPI: Power Button [PWRB] [ 1.112833] ACPI: SSDT bf7900f0 0244C (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117) [ 1.113222] ACPI: SSDT bf792540 00678 (v01 HPQOEM SLIC-CPC 00003001 INTL 20051117) [ 1.113583] Monitor-Mwait will be used to enter C-1 state [ 1.113600] Monitor-Mwait will be used to enter C-2 state [ 1.113615] Monitor-Mwait will be used to enter C-3 state [ 1.113632] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.113646] processor LNXCPU:00: registered as cooling_device0 [ 1.113857] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.113868] processor LNXCPU:01: registered as cooling_device1 [ 1.114077] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) [ 1.114088] processor LNXCPU:02: registered as cooling_device2 [ 1.114298] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) [ 1.114309] processor LNXCPU:03: registered as cooling_device3 [ 1.114516] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3]) [ 1.114529] processor LNXCPU:04: registered as cooling_device4 [ 1.114738] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3]) [ 1.114749] processor LNXCPU:05: registered as cooling_device5 [ 1.114954] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3]) [ 1.114965] processor LNXCPU:06: registered as cooling_device6 [ 1.115169] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3]) [ 1.115181] processor LNXCPU:07: registered as cooling_device7 [ 1.116597] isapnp: Scanning for PnP cards... [ 1.469179] isapnp: No Plug & Play device found [ 1.469841] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.470683] brd: module loaded [ 1.470940] loop: module loaded [ 1.470979] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.471019] ahci 0000:00:1f.2: version 3.0 [ 1.471027] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.471045] alloc irq_desc for 33 on node -1 [ 1.471046] alloc kstat_irqs on node -1 [ 1.471052] ahci 0000:00:1f.2: irq 33 for MSI/MSI-X [ 1.471082] ahci: SSS flag set, parallel bus scan disabled [ 1.487084] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 1.487089] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems [ 1.487096] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.523043] scsi0 : ahci [ 1.523107] scsi1 : ahci [ 1.523139] scsi2 : ahci [ 1.523171] scsi3 : ahci [ 1.523200] scsi4 : ahci [ 1.523231] scsi5 : ahci [ 1.523310] ata1: SATA max UDMA/133 abar m2048@0xfbbf4000 port 0xfbbf4100 irq 33 [ 1.523313] ata2: SATA max UDMA/133 abar m2048@0xfbbf4000 port 0xfbbf4180 irq 33 [ 1.523315] ata3: SATA max UDMA/133 abar m2048@0xfbbf4000 port 0xfbbf4200 irq 33 [ 1.523317] ata4: SATA max UDMA/133 abar m2048@0xfbbf4000 port 0xfbbf4280 irq 33 [ 1.523319] ata5: SATA max UDMA/133 abar m2048@0xfbbf4000 port 0xfbbf4300 irq 33 [ 1.523321] ata6: SATA max UDMA/133 abar m2048@0xfbbf4000 port 0xfbbf4380 irq 33 [ 1.523801] Fixed MDIO Bus: probed [ 1.523821] PPP generic driver version 2.4.2 [ 1.523867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.523879] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.523886] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.523888] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.523913] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.527813] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.527817] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 1.527825] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbbfc000 [ 1.542967] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.543049] usb usb1: configuration #1 chosen from 1 choice [ 1.543066] hub 1-0:1.0: USB hub found [ 1.543071] hub 1-0:1.0: 2 ports detected [ 1.543105] alloc irq_desc for 23 on node -1 [ 1.543106] alloc kstat_irqs on node -1 [ 1.543110] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.543117] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.543119] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.543136] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.547036] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.547041] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 1.547048] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbbf6000 [ 1.562932] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.563015] usb usb2: configuration #1 chosen from 1 choice [ 1.563031] hub 2-0:1.0: USB hub found [ 1.563035] hub 2-0:1.0: 2 ports detected [ 1.563062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.563071] uhci_hcd: USB Universal Host Controller Interface driver [ 1.563112] PNP: No PS/2 controller found. Probing ports directly. [ 1.563382] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.563386] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.563422] mice: PS/2 mouse device common for all mice [ 1.563473] rtc_cmos 00:03: RTC can wake from S4 [ 1.563489] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.563510] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.563568] device-mapper: uevent: version 1.0.3 [ 1.563622] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.563728] device-mapper: multipath: version 1.1.0 loaded [ 1.563730] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.563797] EISA: Probing bus 0 at eisa.0 [ 1.563819] EISA: Detected 0 cards. [ 1.564124] cpuidle: using governor ladder [ 1.564370] cpuidle: using governor menu [ 1.564644] TCP cubic registered [ 1.564734] NET: Registered protocol family 10 [ 1.564990] lo: Disabled Privacy Extensions [ 1.565169] NET: Registered protocol family 17 [ 1.565179] Bluetooth: L2CAP ver 2.13 [ 1.565180] Bluetooth: L2CAP socket layer initialized [ 1.565181] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.565182] Bluetooth: SCO socket layer initialized [ 1.565199] Bluetooth: RFCOMM TTY layer initialized [ 1.565201] Bluetooth: RFCOMM socket layer initialized [ 1.565202] Bluetooth: RFCOMM ver 1.11 [ 1.565662] ------------[ cut here ]------------ [ 1.565667] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/hpet.c:390 hpet_next_event+0x60/0x70() [ 1.565669] Hardware name: AU917AA-ABA e9270f [ 1.565670] Modules linked in: [ 1.565673] Pid: 0, comm: swapper Not tainted 2.6.31-14-generic #48-Ubuntu [ 1.565675] Call Trace: [ 1.565680] [] warn_slowpath_common+0x6d/0xa0 [ 1.565683] [] ? hpet_next_event+0x60/0x70 [ 1.565686] [] ? hpet_next_event+0x60/0x70 [ 1.565689] [] warn_slowpath_null+0x15/0x20 [ 1.565692] [] hpet_next_event+0x60/0x70 [ 1.565695] [] hpet_legacy_next_event+0xa/0x10 [ 1.565699] [] clockevents_program_event+0x8b/0x130 [ 1.565702] [] tick_dev_program_event+0x45/0xe0 [ 1.565708] [] tick_broadcast_oneshot_control+0x102/0x110 [ 1.565712] [] tick_notify+0x105/0x160 [ 1.565715] [] notifier_call_chain+0x35/0x70 [ 1.565718] [] raw_notifier_call_chain+0x1a/0x20 [ 1.565721] [] clockevents_notify+0x24/0x80 [ 1.565725] [] lapic_timer_state_broadcast+0x31/0x34 [ 1.565728] [] acpi_idle_enter_bm+0x148/0x286 [ 1.565730] [] ? menu_select+0x37/0xe0 [ 1.565734] [] cpuidle_idle_call+0x76/0xd0 [ 1.565736] [] cpu_idle+0x8c/0xd0 [ 1.565739] [] start_secondary+0xc6/0xc8 [ 1.565744] ---[ end trace ff961e482ee47fa8 ]--- [ 1.567674] Using IPI No-Shortcut mode [ 1.567705] PM: Resume from disk failed. [ 1.567710] registered taskstats version 1 [ 1.567781] Magic number: 1:260:49 [ 1.567893] rtc_cmos 00:03: setting system clock to 2009-11-11 23:00:43 UTC (1257980443) [ 1.567899] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.567904] EDD information not available. [ 1.842644] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.843622] ata1.00: ATA-8: ST31000528AS, HP34, max UDMA/100 [ 1.843627] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.844852] ata1.00: configured for UDMA/100 [ 1.854618] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.858697] scsi 0:0:0:0: Direct-Access ATA ST31000528AS HP34 PQ: 0 ANSI: 5 [ 1.858751] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.858857] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.858888] sd 0:0:0:0: [sda] Write Protect is off [ 1.858890] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.858902] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.858963] sda: sda1 sda2 sda3 [ 1.867552] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.986878] usb 1-1: configuration #1 chosen from 1 choice [ 1.987091] hub 1-1:1.0: USB hub found [ 1.987299] hub 1-1:1.0: 6 ports detected [ 2.098219] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.230453] usb 2-1: configuration #1 chosen from 1 choice [ 2.230685] hub 2-1:1.0: USB hub found [ 2.230896] hub 2-1:1.0: 8 ports detected [ 2.501579] usb 2-1.1: new low speed USB device using ehci_hcd and address 3 [ 2.581403] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.582390] ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA25C, max UDMA/133 [ 2.582396] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.583603] ata2.00: configured for UDMA/133 [ 2.598176] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5 [ 2.598314] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.598349] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.598376] sd 1:0:0:0: [sdb] Write Protect is off [ 2.598378] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.598392] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.598455] sdb: [ 2.598724] usb 2-1.1: configuration #1 chosen from 1 choice [ 2.616053] sdb1 sdb2 sdb3 [ 2.619201] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.669306] usb 2-1.6: new low speed USB device using ehci_hcd and address 4 [ 2.767703] usb 2-1.6: configuration #1 chosen from 1 choice [ 2.837029] usb 2-1.7: new high speed USB device using ehci_hcd and address 5 [ 2.931678] usb 2-1.7: configuration #1 chosen from 1 choice [ 3.320166] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.322670] ata3.00: ATAPI: hp DVD A DH16AAL, LHD7, max UDMA/100, ATAPI AN [ 3.326014] ata3.00: configured for UDMA/100 [ 3.341342] scsi 2:0:0:0: CD-ROM hp DVD A DH16AAL LHD7 PQ: 0 ANSI: 5 [ 3.347422] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.347427] Uniform CD-ROM driver Revision: 3.20 [ 3.347539] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.347580] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 4.066923] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.067807] ata4.00: ATAPI: ATAPI BD O DH4O3S, WH1E, max UDMA/100, ATAPI AN [ 4.068837] ata4.00: configured for UDMA/100 [ 4.087936] scsi 3:0:0:0: CD-ROM ATAPI BD O DH4O3S WH1E PQ: 0 ANSI: 5 [ 4.095263] sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray [ 4.095360] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 4.095413] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 4.414339] ata5: SATA link down (SStatus 0 SControl 300) [ 4.749779] ata6: SATA link down (SStatus 0 SControl 300) [ 4.766097] Freeing unused kernel memory: 540k freed [ 4.766552] Write protecting the kernel text: 4568k [ 4.766648] Write protecting the kernel read-only data: 1836k [ 4.834859] Linux agpgart interface v0.103 [ 4.852038] [drm] Initialized drm 1.1.0 20060810 [ 4.854648] usbcore: registered new interface driver hiddev [ 4.856879] input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input3 [ 4.856992] generic-usb 0003:04F2:0841.0002: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:1d.0-1.6/input0 [ 4.858573] Initializing USB Mass Storage driver... [ 4.858732] scsi6 : SCSI emulation for USB Mass Storage devices [ 4.858819] usb-storage: device found at 5 [ 4.858820] usb-storage: waiting for device to settle before scanning [ 4.858829] usbcore: registered new interface driver usb-storage [ 4.858831] USB Mass Storage support registered. [ 4.860960] input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input4 [ 4.861078] generic-usb 0003:04F2:0841.0003: input,hiddev96,hidraw1: USB HID v1.11 Device [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:1d.0-1.6/input1 [ 4.862550] generic-usb: probe of 0003:058F:6364.0004 failed with error -22 [ 4.862561] usbcore: registered new interface driver usbhid [ 4.862562] usbhid: v2.6:USB HID core driver [ 4.869917] [drm] radeon default to kernel modesetting DISABLED. [ 4.870317] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.870321] pci 0000:01:00.0: setting latency timer to 64 [ 4.870394] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 4.872604] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5 [ 4.872641] a4tech 0003:09DA:0006.0001: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0 [ 4.878076] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.878086] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.878111] r8169 0000:02:00.0: setting latency timer to 64 [ 4.878220] alloc irq_desc for 34 on node -1 [ 4.878222] alloc kstat_irqs on node -1 [ 4.878232] r8169 0000:02:00.0: irq 34 for MSI/MSI-X [ 4.878591] eth0: RTL8168d/8111d at 0xf8424000, 40:61:86:0d:f3:5e, XID 281000c0 IRQ 34 [ 4.879853] ohci1394 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.879858] ohci1394 0000:03:00.0: setting latency timer to 64 [ 4.939634] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fbeff800-fbefffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.955175] md: bind [ 5.002198] md: bind [ 5.031173] md: bind [ 5.034487] md: raid1 personality registered for level 1 [ 5.034748] raid1: raid set md1 active with 2 out of 2 mirrors [ 5.034781] md1: detected capacity change from 0 to 988102787072 [ 5.035297] md: bind [ 5.036006] md1: [ 5.036899] raid1: raid set md0 active with 2 out of 2 mirrors [ 5.036931] md0: detected capacity change from 0 to 98566144 [ 5.037752] unknown partition table [ 5.038216] md0: unknown partition table [ 5.600831] md: linear personality registered for level -1 [ 5.602445] md: multipath personality registered for level -4 [ 5.603834] md: raid0 personality registered for level 0 [ 5.606299] xor: automatically using best checksumming function: pIII_sse [ 5.624931] pIII_sse : 11911.000 MB/sec [ 5.624933] xor: using function: pIII_sse (11911.000 MB/sec) [ 5.625300] async_tx: api initialized (async) [ 5.692814] raid6: int32x1 1206 MB/s [ 5.760736] raid6: int32x2 1056 MB/s [ 5.828578] raid6: int32x4 909 MB/s [ 5.896535] raid6: int32x8 820 MB/s [ 5.964372] raid6: mmxx1 3985 MB/s [ 6.032233] raid6: mmxx2 4734 MB/s [ 6.100124] raid6: sse1x1 3616 MB/s [ 6.168009] raid6: sse1x2 4299 MB/s [ 6.219316] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00019a07bf] [ 6.236060] raid6: sse2x1 7177 MB/s [ 6.303779] raid6: sse2x2 8534 MB/s [ 6.303780] raid6: using algorithm sse2x2 (8534 MB/s) [ 6.305714] md: raid6 personality registered for level 6 [ 6.305715] md: raid5 personality registered for level 5 [ 6.305716] md: raid4 personality registered for level 4 [ 6.310143] md: raid10 personality registered for level 10 [ 9.849600] usb-storage: device scan complete [ 9.850555] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [ 9.851297] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 9.852185] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 [ 9.853010] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS [ 9.854150] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 9.854195] sd 6:0:0:1: Attached scsi generic sg5 type 0 [ 9.854238] sd 6:0:0:2: Attached scsi generic sg6 type 0 [ 9.854280] sd 6:0:0:3: Attached scsi generic sg7 type 0 [ 9.856123] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 9.859322] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 9.860024] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 9.861519] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 11.402069] kjournald starting. Commit interval 5 seconds [ 11.402083] EXT3-fs: mounted filesystem with writeback data mode. [ 12.174528] type=1505 audit(1257980454.123:2): operation="profile_load" pid=623 name=/usr/share/gdm/guest-session/Xsession [ 12.179913] type=1505 audit(1257980454.127:3): operation="profile_load" pid=624 name=/sbin/dhclient3 [ 12.180266] type=1505 audit(1257980454.127:4): operation="profile_load" pid=624 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 12.180440] type=1505 audit(1257980454.127:5): operation="profile_load" pid=624 name=/usr/lib/connman/scripts/dhclient-script [ 12.205387] type=1505 audit(1257980454.155:6): operation="profile_load" pid=625 name=/usr/bin/evince [ 12.210422] type=1505 audit(1257980454.159:7): operation="profile_load" pid=625 name=/usr/bin/evince-previewer [ 12.213434] type=1505 audit(1257980454.163:8): operation="profile_load" pid=625 name=/usr/bin/evince-thumbnailer [ 12.223773] type=1505 audit(1257980454.171:9): operation="profile_load" pid=627 name=/usr/lib/cups/backend/cups-pdf [ 12.224181] type=1505 audit(1257980454.171:10): operation="profile_load" pid=627 name=/usr/sbin/cupsd [ 12.232502] type=1505 audit(1257980454.179:11): operation="profile_load" pid=628 name=/usr/sbin/tcpdump [ 13.376631] EXT3 FS on md1, internal journal [ 13.384762] udev: starting version 147 [ 14.121987] lp: driver loaded but no devices found [ 14.234066] cfg80211: Calling CRDA to update world regulatory domain [ 14.325012] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.780318] ath9k 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 14.780329] ath9k 0000:04:00.0: setting latency timer to 64 [ 15.215645] ath: EEPROM regdomain: 0x6a [ 15.215647] ath: EEPROM indicates we should expect a direct regpair map [ 15.215649] ath: Country alpha2 being used: 00 [ 15.215650] ath: Regpair used: 0x6a [ 15.238504] cfg80211: World regulatory domain updated: [ 15.238506] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.238507] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.238509] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.238510] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.238512] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.238513] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.283585] alloc irq_desc for 22 on node -1 [ 15.283587] alloc kstat_irqs on node -1 [ 15.283593] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.283618] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.303842] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 15.304187] Registered led device: ath9k-phy0::radio [ 15.304271] Registered led device: ath9k-phy0::assoc [ 15.304285] Registered led device: ath9k-phy0::tx [ 15.304301] Registered led device: ath9k-phy0::rx [ 15.304310] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf8540000, irq=19 [ 15.321733] kjournald starting. Commit interval 5 seconds [ 15.345517] EXT3 FS on md0, internal journal [ 15.345524] EXT3-fs: mounted filesystem with writeback data mode. [ 15.361942] hda_codec: Unknown model for ALC888, trying auto-probe from BIOS... [ 15.362150] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 15.365707] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 15.365731] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 17.499090] padlock: VIA PadLock not detected. [ 17.535581] padlock: VIA PadLock Hash Engine not detected. [ 17.680272] r8169: eth0: link down [ 17.680401] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.713256] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.803321] type=1505 audit(1257980459.759:12): operation="profile_replace" pid=1459 name=/usr/share/gdm/guest-session/Xsession [ 17.804412] type=1505 audit(1257980459.759:13): operation="profile_replace" pid=1460 name=/sbin/dhclient3 [ 17.804785] type=1505 audit(1257980459.763:14): operation="profile_replace" pid=1460 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 17.804967] type=1505 audit(1257980459.763:15): operation="profile_replace" pid=1460 name=/usr/lib/connman/scripts/dhclient-script [ 17.806911] type=1505 audit(1257980459.763:16): operation="profile_replace" pid=1463 name=/usr/bin/evince [ 17.812417] type=1505 audit(1257980459.767:17): operation="profile_replace" pid=1463 name=/usr/bin/evince-previewer [ 17.815698] type=1505 audit(1257980459.771:18): operation="profile_replace" pid=1463 name=/usr/bin/evince-thumbnailer [ 17.820750] type=1505 audit(1257980459.779:19): operation="profile_replace" pid=1470 name=/usr/lib/cups/backend/cups-pdf [ 17.821180] type=1505 audit(1257980459.779:20): operation="profile_replace" pid=1470 name=/usr/sbin/cupsd [ 17.822591] type=1505 audit(1257980459.779:21): operation="profile_replace" pid=1471 name=/usr/sbin/tcpdump [ 17.832510] Adding 11719408k swap on /dev/mapper/cryptswap2. Priority:-1 extents:1 across:11719408k [ 17.846642] Adding 11719408k swap on /dev/mapper/cryptswap1. Priority:-2 extents:1 across:11719408k [ 19.317070] ppdev: user-space parallel port driver [ 19.776265] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 19.776299] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 20.164390] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 20.164422] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 20.164445] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 20.192992] [drm] Setting GART location based on new memory map [ 20.209112] [drm] Loading RV730/RV740 PFP Microcode [ 20.209226] [drm] Loading RV730/RV740 CP Microcode [ 20.224295] [drm] Resetting GPU [ 20.224351] [drm] writeback test succeeded in 1 usecs [ 20.822964] CPU0 attaching NULL sched-domain. [ 20.822967] CPU1 attaching NULL sched-domain. [ 20.822968] CPU2 attaching NULL sched-domain. [ 20.822969] CPU3 attaching NULL sched-domain. [ 20.822970] CPU4 attaching NULL sched-domain. [ 20.822971] CPU5 attaching NULL sched-domain. [ 20.822972] CPU6 attaching NULL sched-domain. [ 20.822973] CPU7 attaching NULL sched-domain. [ 20.835824] CPU0 attaching sched-domain: [ 20.835829] domain 0: span 0,4 level SIBLING [ 20.835834] groups: 0 4 [ 20.835840] domain 1: span 0-7 level MC [ 20.835844] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) [ 20.835859] CPU1 attaching sched-domain: [ 20.835862] domain 0: span 1,5 level SIBLING [ 20.835866] groups: 1 5 [ 20.835871] domain 1: span 0-7 level MC [ 20.835874] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) [ 20.835888] CPU2 attaching sched-domain: [ 20.835889] domain 0: span 2,6 level SIBLING [ 20.835890] groups: 2 6 [ 20.835892] domain 1: span 0-7 level MC [ 20.835893] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) [ 20.835898] CPU3 attaching sched-domain: [ 20.835899] domain 0: span 3,7 level SIBLING [ 20.835900] groups: 3 7 [ 20.835902] domain 1: span 0-7 level MC [ 20.835903] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) [ 20.835908] CPU4 attaching sched-domain: [ 20.835909] domain 0: span 0,4 level SIBLING [ 20.835910] groups: 4 0 [ 20.835912] domain 1: span 0-7 level MC [ 20.835913] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) [ 20.835918] CPU5 attaching sched-domain: [ 20.835919] domain 0: span 1,5 level SIBLING [ 20.835920] groups: 5 1 [ 20.835922] domain 1: span 0-7 level MC [ 20.835923] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) [ 20.835983] CPU6 attaching sched-domain: [ 20.835987] domain 0: span 2,6 level SIBLING [ 20.835992] groups: 6 2 [ 20.835998] domain 1: span 0-7 level MC [ 20.836001] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) [ 20.836012] CPU7 attaching sched-domain: [ 20.836013] domain 0: span 3,7 level SIBLING [ 20.836015] groups: 7 3 [ 20.836017] domain 1: span 0-7 level MC [ 20.836018] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) [ 22.534043] CPU0 attaching NULL sched-domain. [ 22.534047] CPU1 attaching NULL sched-domain. [ 22.534049] CPU2 attaching NULL sched-domain. [ 22.534050] CPU3 attaching NULL sched-domain. [ 22.534052] CPU4 attaching NULL sched-domain. [ 22.534053] CPU5 attaching NULL sched-domain. [ 22.534055] CPU6 attaching NULL sched-domain. [ 22.534056] CPU7 attaching NULL sched-domain. [ 22.545780] CPU0 attaching sched-domain: [ 22.545782] domain 0: span 0,4 level SIBLING [ 22.545784] groups: 0 4 [ 22.545786] domain 1: span 0-7 level MC [ 22.545788] groups: 0,4 1,5 2,6 3,7 [ 22.545791] CPU1 attaching sched-domain: [ 22.545792] domain 0: span 1,5 level SIBLING [ 22.545794] groups: 1 5 [ 22.545796] domain 1: span 0-7 level MC [ 22.545797] groups: 1,5 2,6 3,7 0,4 [ 22.545800] CPU2 attaching sched-domain: [ 22.545801] domain 0: span 2,6 level SIBLING [ 22.545802] groups: 2 6 [ 22.545804] domain 1: span 0-7 level MC [ 22.545805] groups: 2,6 3,7 0,4 1,5 [ 22.545811] CPU3 attaching sched-domain: [ 22.545812] domain 0: span 3,7 level SIBLING [ 22.545813] groups: 3 7 [ 22.545815] domain 1: span 0-7 level MC [ 22.545817] groups: 3,7 0,4 1,5 2,6 [ 22.545820] CPU4 attaching sched-domain: [ 22.545821] domain 0: span 0,4 level SIBLING [ 22.545822] groups: 4 0 [ 22.545824] domain 1: span 0-7 level MC [ 22.545825] groups: 0,4 1,5 2,6 3,7 [ 22.545828] CPU5 attaching sched-domain: [ 22.545829] domain 0: span 1,5 level SIBLING [ 22.545830] groups: 5 1 [ 22.545832] domain 1: span 0-7 level MC [ 22.545833] groups: 1,5 2,6 3,7 0,4 [ 22.545836] CPU6 attaching sched-domain: [ 22.545837] domain 0: span 2,6 level SIBLING [ 22.545838] groups: 6 2 [ 22.545840] domain 1: span 0-7 level MC [ 22.545841] groups: 2,6 3,7 0,4 1,5 [ 22.545844] CPU7 attaching sched-domain: [ 22.545845] domain 0: span 3,7 level SIBLING [ 22.545846] groups: 7 3 [ 22.545848] domain 1: span 0-7 level MC [ 22.545849] groups: 3,7 0,4 1,5 2,6 [ 25.337160] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 30.555218] irq 17: nobody cared (try booting with the "irqpoll" option) [ 30.555225] Pid: 0, comm: swapper Tainted: G W 2.6.31-14-generic #48-Ubuntu [ 30.555232] Call Trace: [ 30.555238] [] ? printk+0x18/0x1c [ 30.555241] [] __report_bad_irq+0x27/0x90 [ 30.555243] [] ? handle_IRQ_event+0x4c/0x140 [ 30.555245] [] note_interrupt+0x150/0x190 [ 30.555248] [] ? ktime_get_ts+0x4c/0x60 [ 30.555250] [] handle_fasteoi_irq+0xac/0xd0 [ 30.555252] [] handle_irq+0x18/0x30 [ 30.555254] [] do_IRQ+0x47/0xc0 [ 30.555256] [] ? notifier_call_chain+0x35/0x70 [ 30.555258] [] common_interrupt+0x30/0x40 [ 30.555262] [] ? acpi_idle_enter_c1+0x8a/0xa8 [ 30.555265] [] cpuidle_idle_call+0x76/0xd0 [ 30.555267] [] cpu_idle+0x8c/0xd0 [ 30.555268] [] start_secondary+0xc6/0xc8 [ 30.555270] handlers: [ 30.555270] [] (azx_interrupt+0x0/0x150 [snd_hda_intel]) [ 30.555276] Disabling IRQ #17 [ 34.712117] wlan0: authenticate with AP 00:0c:e5:4f:07:80 [ 34.714135] wlan0: authenticated [ 34.714138] wlan0: associate with AP 00:0c:e5:4f:07:80 [ 34.716895] wlan0: RX AssocResp from 00:0c:e5:4f:07:80 (capab=0x11 status=0 aid=4) [ 34.716900] wlan0: associated [ 34.717171] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.489245] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f000c [ 45.505497] wlan0: no IPv6 routers present [ 391.148755] [drm] Resetting GPU [ 391.229379] mtrr: no MTRR for d0000000,10000000 found [ 391.391873] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 391.391904] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 391.746469] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 391.746497] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 391.746519] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 391.760978] [drm] Setting GART location based on new memory map [ 391.777202] [drm] Loading RV730/RV740 PFP Microcode [ 391.777317] [drm] Loading RV730/RV740 CP Microcode [ 391.792399] [drm] Resetting GPU [ 391.792456] [drm] writeback test succeeded in 1 usecs [ 940.797628] [drm] Resetting GPU [ 940.864473] mtrr: no MTRR for d0000000,10000000 found [ 940.992809] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 940.992845] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 941.346714] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 941.346741] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 941.346763] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 941.361307] [drm] Setting GART location based on new memory map [ 941.377856] [drm] Loading RV730/RV740 PFP Microcode [ 941.377984] [drm] Loading RV730/RV740 CP Microcode [ 941.393092] [drm] Resetting GPU [ 941.393151] [drm] writeback test succeeded in 1 usecs [ 1100.781533] [drm] Resetting GPU [ 1100.870138] mtrr: no MTRR for d0000000,10000000 found [ 1101.007610] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 1101.007643] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 1101.369406] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 1101.369433] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 1101.369455] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 1101.383793] [drm] Setting GART location based on new memory map [ 1101.399912] [drm] Loading RV730/RV740 PFP Microcode [ 1101.400022] [drm] Loading RV730/RV740 CP Microcode [ 1101.415094] [drm] Resetting GPU [ 1101.415150] [drm] writeback test succeeded in 1 usecs [ 5190.336480] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 5190.336604] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 5240.165822] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 5240.165946] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 5405.854200] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 5405.854368] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 5909.325327] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 5909.325451] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 6134.883522] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 6134.883697] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 6694.616236] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 6694.616360] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 7309.956127] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 7309.956260] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 7325.821300] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 7325.821424] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 7547.863822] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 7547.863942] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 7638.655407] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 7638.655531] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 7880.945454] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 7880.945578] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 8126.115806] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 8126.115988] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 8152.083624] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 8152.083748] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 8488.347782] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [ 8488.347902] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [ 9519.360239] wlan0: no probe response from AP 00:0c:e5:4f:07:80 - disassociating [ 9525.338582] wlan0: authenticate with AP 00:0c:e5:4f:07:80 [ 9525.340512] wlan0: authenticated [ 9525.340518] wlan0: associate with AP 00:0c:e5:4f:07:80 [ 9525.342942] wlan0: RX ReassocResp from 00:0c:e5:4f:07:80 (capab=0x11 status=0 aid=4) [ 9525.342948] wlan0: associated [15947.825530] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [35279.572236] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [35279.572400] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [37901.241895] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [37901.242019] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [49282.227957] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [49282.228081] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [52899.195195] wlan0: no probe response from AP 00:0c:e5:4f:07:80 - disassociating [52905.197522] wlan0: authenticate with AP 00:0c:e5:4f:07:80 [52905.199750] wlan0: authenticated [52905.199755] wlan0: associate with AP 00:0c:e5:4f:07:80 [52905.202658] wlan0: RX ReassocResp from 00:0c:e5:4f:07:80 (capab=0x11 status=0 aid=4) [52905.202660] wlan0: associated [61079.469738] usb 2-1.1: USB disconnect, address 3 [61183.687768] usb 2-1.2: new low speed USB device using ehci_hcd and address 6 [61183.784813] usb 2-1.2: configuration #1 chosen from 1 choice [61183.789021] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7 [61183.789116] a4tech 0003:09DA:0006.0005: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0 [61226.352946] [drm] Resetting GPU [61226.423184] mtrr: no MTRR for d0000000,10000000 found [61226.697215] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [61226.697246] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [61227.055788] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [61227.055815] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [61227.055837] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [61227.070149] [drm] Setting GART location based on new memory map [61227.086228] [drm] Loading RV730/RV740 PFP Microcode [61227.086335] [drm] Loading RV730/RV740 CP Microcode [61227.101404] [drm] Resetting GPU [61227.101460] [drm] writeback test succeeded in 1 usecs [62656.630919] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [68019.502385] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [68019.502508] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [69808.239506] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [69808.239629] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [70390.116354] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [70390.116477] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [70442.841938] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [70442.842062] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [71069.940881] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 [71069.941005] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef [71817.574957] device wlan0 entered promiscuous mode [71837.744644] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [71837.879387] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [71838.191099] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [71838.266844] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [71838.342580] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [71838.414803] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [71838.491186] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [71838.711465] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [71838.929641] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [71881.083183] device wlan0 left promiscuous mode [71907.223478] device wlan0 entered promiscuous mode [71935.186007] device wlan0 left promiscuous mode [71957.543154] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72024.123874] device wlan0 entered promiscuous mode [72036.507211] device wlan0 left promiscuous mode [72058.547870] device wlan0 entered promiscuous mode [72077.343038] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72077.474700] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72077.718114] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72077.790150] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72077.866120] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72077.941911] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72078.073758] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72078.293204] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72078.512929] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72106.430190] device wlan0 left promiscuous mode [72182.934199] wlan0: no probe response from AP 00:0c:e5:4f:07:80 - disassociating [72183.082786] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72188.952432] wlan0: authenticate with AP 00:0c:e5:4f:07:80 [72188.954424] wlan0: authenticated [72188.954428] wlan0: associate with AP 00:0c:e5:4f:07:80 [72188.956859] wlan0: RX ReassocResp from 00:0c:e5:4f:07:80 (capab=0x11 status=0 aid=4) [72188.956864] wlan0: associated [72191.533344] device wlan0 entered promiscuous mode [72197.142447] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72197.218293] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72197.294171] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72197.593413] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72197.665513] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72197.745423] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72197.821228] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72197.897275] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72198.118081] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72198.336295] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72222.523965] device wlan0 left promiscuous mode [72316.942086] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72646.540170] device wlan0 entered promiscuous mode [72676.341833] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72676.472114] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72676.600421] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72676.733376] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72676.808036] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72676.880065] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72676.956041] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72677.027718] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72677.099551] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72677.315402] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72677.534948] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [72767.476288] device wlan0 left promiscuous mode [72796.140592] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020 [78395.888211] type=1505 audit(1258059005.154:22): operation="profile_load" pid=21564 name=/usr/sbin/mysqld [78396.037650] type=1503 audit(1258059005.306:23): operation="open" pid=21591 parent=21590 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [78396.048500] type=1503 audit(1258059005.318:24): operation="open" pid=21605 parent=21604 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [78396.176903] type=1503 audit(1258059005.446:25): operation="open" pid=21720 parent=21611 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [78397.108571] type=1503 audit(1258059006.378:26): operation="open" pid=21736 parent=21735 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [78397.202207] type=1503 audit(1258059006.469:27): operation="open" pid=21747 parent=21746 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"