[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-11-generic (buildd@zirconium) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 (Ubuntu 2.6.38-11.50-generic 2.6.38.8)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI 2.2 present.
[    0.000000] DMI: VIA Technologies, Inc. P4X400-8235/P4X400-8235, BIOS 6.00 PG 04/11/2003
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-EFFFF uncachable
[    0.000000]   F0000-F7FFF write-through
[    0.000000]   F8000-F8FFF uncachable
[    0.000000]   F9000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 0E0000000 mask FFC000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] init_memory_mapping: 0000000000000000-000000001fff0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001fc00000 page 2M
[    0.000000]  001fc00000 - 001fff0000 page 4k
[    0.000000] kernel direct mapping tables up to 1fff0000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 1e818000 - 1f45c000
[    0.000000] ACPI: RSDP 000f6470 00014 (v00 VIAP4X)
[    0.000000] ACPI: RSDT 1fff3000 00028 (v01 VIAP4X AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 1fff3040 00074 (v01 VIAP4X AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 1fff30c0 04385 (v01 VIAP4X AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 1fff0000 00040
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1fff0000
[    0.000000]   low ram: 0 - 1fff0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001fff0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x0001fff0
[    0.000000] On node 0 totalpages: 130944
[    0.000000] free_area_init_node: node 0, pgdat c1784180, node_mem_map dfbef200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3952 pages, LIFO batch:0
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 125968 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Found and enabled local APIC!
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @de400000 s28800 r0 d24448 u4194304
[    0.000000] pcpu-alloc: s28800 r0 d24448 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=04062788-7423-44cc-837d-68c45e87703a ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2620800 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 494720k/524224k available (5191k kernel code, 29056k reserved, 2537k data, 700k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xe07f0000 - 0xff7fe000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[    0.000000]       .init : 0xc178d000 - 0xc183c000   ( 700 kB)
[    0.000000]       .data : 0xc1511e91 - 0xc178c500   (2537 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1511e91   (5191 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=de006000 soft=de008000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2659.552 MHz processor.
[    0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.10 BogoMIPS (lpj=10638208)
[    0.008011] pid_max: default: 32768 minimum: 301
[    0.008045] Security Framework initialized
[    0.008071] AppArmor: AppArmor initialized
[    0.008075] Yama: becoming mindful.
[    0.008153] Mount-cache hash table entries: 512
[    0.008342] Initializing cgroup subsys ns
[    0.008349] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.008354] Initializing cgroup subsys cpuacct
[    0.008362] Initializing cgroup subsys memory
[    0.008377] Initializing cgroup subsys devices
[    0.008381] Initializing cgroup subsys freezer
[    0.008385] Initializing cgroup subsys net_cls
[    0.008389] Initializing cgroup subsys blkio
[    0.008440] CPU0: Hyper-Threading is disabled
[    0.008446] mce: CPU supports 4 MCE banks
[    0.008459] CPU0: Thermal monitoring enabled (TM1)
[    0.009253] SMP alternatives: switching to UP code
[    0.022423] Freeing SMP alternatives: 20k freed
[    0.022454] ACPI: Core revision 20110112
[    0.025187] ACPI: setting ELCR to 0200 (from 1e20)
[    0.026720] ftrace: allocating 23652 entries in 47 pages
[    0.028116] weird, boot CPU (#0) not listed by the BIOS.
[    0.028121] SMP motherboard not detected.
[    0.028126] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.032001] SMP disabled
[    0.032001] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.032001] ... version:                0
[    0.032001] ... bit width:              40
[    0.032001] ... generic registers:      18
[    0.032001] ... value mask:             000000ffffffffff
[    0.032001] ... max period:             0000007fffffffff
[    0.032001] ... fixed-purpose events:   0
[    0.032001] ... event mask:             000000000003ffff
[    0.032001] Brought up 1 CPUs
[    0.032001] Total of 1 processors activated (5319.10 BogoMIPS).
[    0.032001] devtmpfs: initialized
[    0.032001] print_constraints: dummy: 
[    0.032001] Time: 16:55:48  Date: 10/11/11
[    0.032001] NET: Registered protocol family 16
[    0.032001] EISA bus registered
[    0.032001] ACPI: bus type pci registered
[    0.037244] PCI: PCI BIOS revision 2.10 entry at 0xfb140, last bus=1
[    0.037248] PCI: Using configuration type 1 for base access
[    0.038737] bio: create slab <bio-0> at 0
[    0.039787] ACPI: EC: Look up EC in DSDT
[    0.044282] ACPI: Interpreter enabled
[    0.044292] ACPI: (supports S0 S1 S4 S5)
[    0.044323] ACPI: Using PIC for interrupt routing
[    0.050048] ACPI: No dock devices found.
[    0.050052] HEST: Table not found.
[    0.050058] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.050145] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.050308] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.050313] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.050317] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.050321] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.050325] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[    0.050349] pci 0000:00:00.0: [1106:3168] type 0 class 0x000600
[    0.050361] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
[    0.050437] pci 0000:00:01.0: [1106:b168] type 1 class 0x000604
[    0.050486] pci 0000:00:01.0: supports D1
[    0.050517] pci 0000:00:0a.0: [14f1:2f00] type 0 class 0x000780
[    0.050536] pci 0000:00:0a.0: reg 10: [mem 0xe6000000-0xe600ffff]
[    0.050547] pci 0000:00:0a.0: reg 14: [io  0xd000-0xd007]
[    0.050608] pci 0000:00:0a.0: PME# supported from D3hot D3cold
[    0.050614] pci 0000:00:0a.0: PME# disabled
[    0.050641] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[    0.050693] pci 0000:00:10.0: reg 20: [io  0xd400-0xd41f]
[    0.050731] pci 0000:00:10.0: supports D1 D2
[    0.050734] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.050739] pci 0000:00:10.0: PME# disabled
[    0.050759] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[    0.050811] pci 0000:00:10.1: reg 20: [io  0xd800-0xd81f]
[    0.050849] pci 0000:00:10.1: supports D1 D2
[    0.050852] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.050857] pci 0000:00:10.1: PME# disabled
[    0.050880] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[    0.050932] pci 0000:00:10.2: reg 20: [io  0xdc00-0xdc1f]
[    0.050970] pci 0000:00:10.2: supports D1 D2
[    0.050973] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.050978] pci 0000:00:10.2: PME# disabled
[    0.050999] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
[    0.051018] pci 0000:00:10.3: reg 10: [mem 0xe6010000-0xe60100ff]
[    0.051088] pci 0000:00:10.3: supports D1 D2
[    0.051092] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.051097] pci 0000:00:10.3: PME# disabled
[    0.051124] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
[    0.051197] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.051205] pci 0000:00:11.0: quirk: [io  0x0400-0x047f] claimed by vt8235 PM
[    0.051211] pci 0000:00:11.0: quirk: [io  0x0500-0x050f] claimed by vt8235 SMB
[    0.051249] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
[    0.051303] pci 0000:00:11.1: reg 20: [io  0xe000-0xe00f]
[    0.051367] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[    0.051387] pci 0000:00:11.5: reg 10: [io  0xe400-0xe4ff]
[    0.051460] pci 0000:00:11.5: supports D1 D2
[    0.051484] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[    0.051504] pci 0000:00:12.0: reg 10: [io  0xe800-0xe8ff]
[    0.051516] pci 0000:00:12.0: reg 14: [mem 0xe6011000-0xe60110ff]
[    0.051581] pci 0000:00:12.0: supports D1 D2
[    0.051584] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.051590] pci 0000:00:12.0: PME# disabled
[    0.051654] pci 0000:01:00.0: [1002:5964] type 0 class 0x000300
[    0.051673] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    0.051684] pci 0000:01:00.0: reg 14: [io  0xc000-0xc0ff]
[    0.051694] pci 0000:01:00.0: reg 18: [mem 0xe5000000-0xe500ffff]
[    0.051725] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.051748] pci 0000:01:00.0: supports D1 D2
[    0.051768] pci 0000:01:00.1: [1002:5d44] type 0 class 0x000380
[    0.051784] pci 0000:01:00.1: reg 10: [mem 0xd8000000-0xdfffffff pref]
[    0.051794] pci 0000:01:00.1: reg 14: [mem 0xe5010000-0xe501ffff]
[    0.051846] pci 0000:01:00.1: supports D1 D2
[    0.051893] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.051899] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.051905] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[    0.051912] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.051922] pci_bus 0000:00: on NUMA node 0
[    0.051927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.068973] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[    0.069109] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[    0.069249] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[    0.069388] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[    0.069498] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.069601] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.069705] ACPI: PCI Interrupt Link [LNK0] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.069809] ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.069937] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[    0.070061] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[    0.070216] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[    0.070339] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[    0.070504] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.070509] vgaarb: loaded
[    0.070823] SCSI subsystem initialized
[    0.070920] libata version 3.00 loaded.
[    0.070992] usbcore: registered new interface driver usbfs
[    0.071011] usbcore: registered new interface driver hub
[    0.071050] usbcore: registered new device driver usb
[    0.071221] wmi: Mapper loaded
[    0.071224] PCI: Using ACPI for IRQ routing
[    0.071230] PCI: pci_cache_line_size set to 64 bytes
[    0.071294] reserve RAM buffer: 000000001fff0000 - 000000001fffffff 
[    0.071455] NetLabel: Initializing
[    0.071458] NetLabel:  domain hash size = 128
[    0.071461] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.071476] NetLabel:  unlabeled traffic allowed by default
[    0.082066] AppArmor: AppArmor Filesystem Enabled
[    0.082124] pnp: PnP ACPI init
[    0.082158] ACPI: bus type pnp registered
[    0.082426] pnp 00:00: [mem 0x000cd000-0x000cffff]
[    0.082430] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[    0.082433] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[    0.082437] pnp 00:00: [mem 0x000fc000-0x000fffff]
[    0.082440] pnp 00:00: [mem 0x1fff0000-0x1fffffff]
[    0.082443] pnp 00:00: [mem 0xffff0000-0xffffffff]
[    0.082446] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.082449] pnp 00:00: [mem 0x00100000-0x1ffeffff]
[    0.082453] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[    0.082456] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[    0.082459] pnp 00:00: [mem 0xfff80000-0xfffeffff]
[    0.082538] system 00:00: [mem 0x000cd000-0x000cffff] has been reserved
[    0.082543] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.082547] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.082551] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.082556] system 00:00: [mem 0x1fff0000-0x1fffffff] could not be reserved
[    0.082560] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[    0.082564] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.082569] system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
[    0.082573] system 00:00: [mem 0xfec00000-0xfec00fff] has been reserved
[    0.082577] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.082581] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.082587] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.082665] pnp 00:01: [bus 00-ff]
[    0.082669] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.082673] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.082676] pnp 00:01: [io  0x0d00-0xffff window]
[    0.082680] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.082683] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[    0.082686] pnp 00:01: [mem 0x20000000-0xfebfffff window]
[    0.082757] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.082796] pnp 00:02: [io  0x0400-0x047f]
[    0.082803] pnp 00:02: [io  0x0500-0x050f]
[    0.082856] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.082860] system 00:02: [io  0x0500-0x050f] has been reserved
[    0.082864] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.083252] pnp 00:03: [io  0x0010-0x001f]
[    0.083256] pnp 00:03: [io  0x0022-0x003f]
[    0.083259] pnp 00:03: [io  0x0044-0x005f]
[    0.083262] pnp 00:03: [io  0x0062-0x0063]
[    0.083264] pnp 00:03: [io  0x0065-0x006f]
[    0.083267] pnp 00:03: [io  0x0074-0x007f]
[    0.083270] pnp 00:03: [io  0x0091-0x0093]
[    0.083273] pnp 00:03: [io  0x00a2-0x00bf]
[    0.083276] pnp 00:03: [io  0x00e0-0x00ef]
[    0.083279] pnp 00:03: [io  0x04d0-0x04d1]
[    0.083282] pnp 00:03: [io  0x0294-0x0297]
[    0.083360] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.083364] system 00:03: [io  0x0294-0x0297] has been reserved
[    0.083369] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.083387] pnp 00:04: [dma 4]
[    0.083390] pnp 00:04: [io  0x0000-0x000f]
[    0.083393] pnp 00:04: [io  0x0080-0x0090]
[    0.083396] pnp 00:04: [io  0x0094-0x009f]
[    0.083399] pnp 00:04: [io  0x00c0-0x00df]
[    0.083445] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.083462] pnp 00:05: [io  0x0070-0x0073]
[    0.083468] pnp 00:05: [irq 8]
[    0.083519] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.083532] pnp 00:06: [io  0x0061]
[    0.083579] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.083593] pnp 00:07: [io  0x00f0-0x00ff]
[    0.083597] pnp 00:07: [irq 13]
[    0.083644] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.083796] pnp 00:08: [io  0x03f2-0x03f5]
[    0.083800] pnp 00:08: [io  0x03f7]
[    0.083803] pnp 00:08: [irq 6]
[    0.083805] pnp 00:08: [dma 2]
[    0.083875] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.084118] pnp 00:09: [io  0x03f8-0x03ff]
[    0.084122] pnp 00:09: [irq 4]
[    0.084210] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.084443] pnp 00:0a: [io  0x02f8-0x02ff]
[    0.084447] pnp 00:0a: [irq 3]
[    0.084530] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.085001] pnp 00:0b: [io  0x0378-0x037f]
[    0.085005] pnp 00:0b: [io  0x0778-0x077b]
[    0.085008] pnp 00:0b: [irq 7]
[    0.085010] pnp 00:0b: [dma 3]
[    0.085109] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.085166] pnp 00:0c: [io  0x0060]
[    0.085170] pnp 00:0c: [io  0x0064]
[    0.085173] pnp 00:0c: [irq 1]
[    0.085227] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.085504] pnp 00:0d: [io  0x0201-0x0207]
[    0.085508] pnp 00:0d: [io  0x0200]
[    0.085570] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.085661] pnp: PnP ACPI: found 14 devices
[    0.085664] ACPI: ACPI bus type pnp unregistered
[    0.085670] PnPBIOS: Disabled by ACPI PNP
[    0.123014] Switching to clocksource acpi_pm
[    0.123067] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe401ffff pref]
[    0.123073] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.123078] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.123086] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[    0.123091] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.123109] pci 0000:00:01.0: setting latency timer to 64
[    0.123115] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.123119] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.123123] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.123127] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
[    0.123131] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[    0.123191] NET: Registered protocol family 2
[    0.123276] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.123529] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.123637] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.123736] TCP: Hash tables configured (established 16384 bind 16384)
[    0.123740] TCP reno registered
[    0.123745] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.123754] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.123852] NET: Registered protocol family 1
[    0.123877] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.123976] pci 0000:01:00.0: Boot video device
[    0.123984] PCI: CLS 32 bytes, default 64
[    0.123993] Switched to NOHz mode on CPU #0
[    0.123993] cpufreq-nforce2: No nForce2 chipset.
[    0.123993] audit: initializing netlink socket (disabled)
[    0.123993] type=2000 audit(1318352147.120:1): initialized
[    0.131386] Trying to unpack rootfs image as initramfs...
[    0.144784] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.152486] VFS: Disk quotas dquot_6.5.2
[    0.152593] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.153675] fuse init (API version 7.16)
[    0.153828] msgmni has been set to 966
[    0.160649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.160700] io scheduler noop registered
[    0.160703] io scheduler deadline registered
[    0.160731] io scheduler cfq registered (default)
[    0.160917] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.160952] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.161176] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.161185] ACPI: Power Button [PWRB]
[    0.161258] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.161267] ACPI: Sleep Button [SLPB]
[    0.161345] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.161350] ACPI: Power Button [PWRF]
[    0.161424] ACPI: Fan [FAN] (on)
[    0.161630] ACPI: acpi_idle registered with cpuidle
[    0.164075] thermal LNXTHERM:00: registered as thermal_zone0
[    0.164080] ACPI: Thermal Zone [THRM] (0 C)
[    0.164193] ERST: Table is not found!
[    0.164337] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.184696] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.188483] isapnp: Scanning for PnP cards...
[    0.276550] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.318242] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.404886] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.424692] Linux agpgart interface v0.103
[    0.424788] agpgart: Detected VIA PT800 chipset
[    0.436507] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[    0.438342] brd: module loaded
[    0.439215] loop: module loaded
[    0.439379] i2c-core: driver [adp5520] using legacy suspend method
[    0.439382] i2c-core: driver [adp5520] using legacy resume method
[    0.488406] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    0.488415] PCI: setting IRQ 11 as level-triggered
[    0.488424] pata_acpi 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.488434] pata_acpi 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11
[    0.488535] pata_acpi 0000:00:11.1: PCI INT A disabled
[    0.489086] Fixed MDIO Bus: probed
[    0.489149] PPP generic driver version 2.4.2
[    0.489266] tun: Universal TUN/TAP device driver, 1.6
[    0.489270] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.489415] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.489745] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[    0.489750] PCI: setting IRQ 5 as level-triggered
[    0.489757] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[    0.489783] ehci_hcd 0000:00:10.3: EHCI Host Controller
[    0.489867] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[    0.489930] ehci_hcd 0000:00:10.3: irq 5, io mem 0xe6010000
[    0.500328] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    0.500612] hub 1-0:1.0: USB hub found
[    0.500620] hub 1-0:1.0: 6 ports detected
[    0.500733] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.500757] uhci_hcd: USB Universal Host Controller Interface driver
[    0.500843] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.500858] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.500933] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.500968] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d400
[    0.501147] hub 2-0:1.0: USB hub found
[    0.501155] hub 2-0:1.0: 2 ports detected
[    0.501645] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
[    0.501649] PCI: setting IRQ 12 as level-triggered
[    0.501657] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
[    0.501669] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.501736] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.501771] uhci_hcd 0000:00:10.1: irq 12, io base 0x0000d800
[    0.501950] hub 3-0:1.0: USB hub found
[    0.501956] hub 3-0:1.0: 2 ports detected
[    0.502391] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    0.502395] PCI: setting IRQ 10 as level-triggered
[    0.502402] uhci_hcd 0000:00:10.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[    0.502413] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.502487] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.502517] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000dc00
[    0.502696] hub 4-0:1.0: USB hub found
[    0.502703] hub 4-0:1.0: 2 ports detected
[    0.502875] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.502879] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.503067] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.508383] mousedev: PS/2 mouse device common for all mice
[    0.508665] rtc_cmos 00:05: RTC can wake from S4
[    0.508740] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.508771] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.508937] device-mapper: uevent: version 1.0.3
[    0.509056] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.509173] device-mapper: multipath: version 1.2.0 loaded
[    0.509177] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.509306] EISA: Probing bus 0 at eisa.0
[    0.509347] EISA: Detected 0 cards.
[    0.512076] cpuidle: using governor ladder
[    0.512082] cpuidle: using governor menu
[    0.512485] TCP cubic registered
[    0.512712] NET: Registered protocol family 10
[    0.513496] NET: Registered protocol family 17
[    0.513531] Registering the dns_resolver key type
[    0.513595] Using IPI No-Shortcut mode
[    0.513784] PM: Hibernation image not present or could not be loaded.
[    0.513802] registered taskstats version 1
[    0.514027]   Magic number: 15:438:944
[    0.514086] tty tty1: hash matches
[    0.514158] rtc_cmos 00:05: setting system clock to 2011-10-11 16:55:48 UTC (1318352148)
[    0.514163] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.514166] EDD information not available.
[    0.536227] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.907732] isapnp: No Plug & Play device found
[    0.975630] Freeing initrd memory: 12560k freed
[    0.992664] Freeing unused kernel memory: 700k freed
[    0.993591] Write protecting the kernel text: 5192k
[    0.993629] Write protecting the kernel read-only data: 2148k
[    1.030422] <30>udev[59]: starting version 167
[    1.056070] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    1.128091] Refined TSC clocksource calibration: 2659.090 MHz.
[    1.128102] Switching to clocksource tsc
[    1.258535] pata_via 0000:00:11.1: version 0.3.4
[    1.258560] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    1.258568] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11
[    1.289610] via-rhine.c:v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[    1.289618] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[    1.294435] scsi0 : pata_via
[    1.297376] Floppy drive(s): fd0 is 1.44M
[    1.298316] scsi1 : pata_via
[    1.314846] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[    1.314853] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[    1.321870] FDC 0 is a post-1991 82077
[    1.342361] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    1.355234] eth0: VIA Rhine II at 0xe6011000, 00:01:29:24:98:d5, IRQ 11.
[    1.355949] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[    1.532545] ata1.00: ATA-6: ST380011A, 3.04, max UDMA/100
[    1.532551] ata1.00: 156301488 sectors, multi 16: LBA 
[    1.548388] ata1.00: configured for UDMA/100
[    1.548568] scsi 0:0:0:0: Direct-Access     ATA      ST380011A        3.04 PQ: 0 ANSI: 5
[    1.548850] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.549129] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.549215] sd 0:0:0:0: [sda] Write Protect is off
[    1.549220] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.549256] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.593227]  sda: sda1 sda2 < sda5 sda6 >
[    1.593779] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.720370] ata2.00: ATAPI: ATAPI DVD-ROM 16XMax, VER 1.00, max UDMA/33
[    1.720377] ata2.01: ATAPI: ATAPI CD-RW 52XMax, Ver 3.30, max UDMA/33
[    1.736230] ata2.00: configured for UDMA/33
[    1.752229] ata2.01: configured for UDMA/33
[    1.753008] scsi 1:0:0:0: CD-ROM            ATAPI    DVD-ROM 16XMax   1.00 PQ: 0 ANSI: 5
[    1.754074] sr0: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[    1.754080] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.754290] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.754413] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.755513] scsi 1:0:1:0: CD-ROM            ATAPI    CD-RW52XMAX      3.30 PQ: 0 ANSI: 5
[    1.757134] sr1: scsi3-mmc drive: 52x/40x writer cd/rw xa/form2 cdda tray
[    1.757347] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    1.757472] sr 1:0:1:0: Attached scsi generic sg2 type 5
[    1.804980] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input4
[    1.805334] generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:10.1-2/input0
[    1.805694] usbcore: registered new interface driver usbhid
[    1.805700] usbhid: USB HID core driver
[    2.353860] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   12.490403] Adding 1272828k swap on /dev/sda6.  Priority:-1 extents:1 across:1272828k 
[   12.553083] <30>udev[272]: starting version 167
[   12.625331] lp: driver loaded but no devices found
[   12.728114] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   13.075763] type=1400 audit(1318352161.054:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=420 comm="apparmor_parser"
[   13.089756] type=1400 audit(1318352161.070:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
[   13.090289] type=1400 audit(1318352161.070:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
[   13.279717] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.698537] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   13.724352] irda_init()
[   13.724379] NET: Registered protocol family 23
[   13.929616] parport_pc 00:0b: reported by Plug and Play ACPI
[   13.929714] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   14.059144] lp0: using parport0 (interrupt-driven).
[   14.100056] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 864kHz
[   14.467377] type=1400 audit(1318352162.446:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=645 comm="apparmor_parser"
[   14.481867] type=1400 audit(1318352162.462:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=647 comm="apparmor_parser"
[   14.492064] type=1400 audit(1318352162.474:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=647 comm="apparmor_parser"
[   14.492599] type=1400 audit(1318352162.474:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=647 comm="apparmor_parser"
[   14.573325] type=1400 audit(1318352162.554:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=649 comm="apparmor_parser"
[   14.612897] type=1400 audit(1318352162.594:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=649 comm="apparmor_parser"
[   14.633256] type=1400 audit(1318352162.614:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=649 comm="apparmor_parser"
[   14.831813] [drm] Initialized drm 1.1.0 20060810
[   15.292542] ppdev: user-space parallel port driver
[   15.710549] [drm] radeon defaulting to kernel modesetting.
[   15.710557] [drm] radeon kernel modesetting enabled.
[   15.710650] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[   15.728928] [drm] initializing kernel modesetting (RV280 0x1002:0x5964).
[   15.728972] [drm] register mmio base: 0xE5000000
[   15.728975] [drm] register mmio size: 65536
[   15.729170] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   15.729192] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[   15.729256] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[   15.729267] radeon 0000:01:00.0: GTT: 64M 0xE0000000 - 0xE3FFFFFF
[   15.729272] [drm] Generation 2 PCI interface, using max accessible memory
[   15.729278] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[   15.729291] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   15.729294] [drm] Driver supports precise vblank timestamp query.
[   15.729313] [drm] radeon: irq initialized.
[   15.729481] [drm] Detected VRAM RAM=128M, BAR=128M
[   15.729486] [drm] RAM width 64bits DDR
[   15.733412] [TTM] Zone  kernel: Available graphics memory: 254000 kiB.
[   15.733416] [TTM] Initializing pool allocator.
[   15.733448] [drm] radeon: 128M of VRAM memory ready
[   15.733452] [drm] radeon: 64M of GTT memory ready.
[   15.734662] radeon 0000:01:00.0: WB disabled
[   15.735838] [drm] Loading R200 Microcode
[   15.744474] [drm] radeon: ring at 0x00000000E0001000
[   15.744496] [drm] ring test succeeded in 0 usecs
[   15.744829] [drm] radeon: ib pool ready.
[   15.744938] [drm] ib test succeeded in 0 usecs
[   15.759192] [drm] No TV DAC info found in BIOS
[   15.759617] [drm] Radeon Display Connectors
[   15.759622] [drm] Connector 0:
[   15.759624] [drm]   VGA
[   15.759628] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   15.759631] [drm]   Encoders:
[   15.759633] [drm]     CRT1: INTERNAL_DAC1
[   15.759635] [drm] Connector 1:
[   15.759637] [drm]   DVI-I
[   15.759639] [drm]   HPD1
[   15.759643] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   15.759645] [drm]   Encoders:
[   15.759647] [drm]     CRT2: INTERNAL_DAC2
[   15.759649] [drm]     DFP1: INTERNAL_TMDS1
[   15.759652] [drm] Connector 2:
[   15.759654] [drm]   S-video
[   15.759655] [drm]   Encoders:
[   15.759657] [drm]     TV1: INTERNAL_DAC2
[   15.832565] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[   15.832711] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   16.023529] [drm] fb mappable at 0xD0040000
[   16.023534] [drm] vram apper at 0xD0000000
[   16.023537] [drm] size 5242880
[   16.023539] [drm] fb depth is 24
[   16.023541] [drm]    pitch is 5120
[   16.023890] fbcon: radeondrmfb (fb0) is primary device
[   16.025777] Console: switching to colour frame buffer device 160x64
[   16.025919] fb0: radeondrmfb frame buffer device
[   16.025922] drm: registered panic notifier
[   16.025939] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
[   20.547088] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   24.584012] eth0: no IPv6 routers present
[ 9698.016021] ata1: lost interrupt (Status 0x50)
[ 9698.016052] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9698.016060] ata1.00: failed command: READ DMA
[ 9698.016068] ata1.00: cmd c8/00:38:08:82:2c/00:00:00:00:00/e9 tag 0 dma 28672 in
[ 9698.016070]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9698.016074] ata1.00: status: { DRDY }
[ 9698.016104] ata1: soft resetting link
[ 9698.252393] ata1.00: configured for UDMA/100
[ 9698.252400] ata1.00: device reported invalid CHS sector 0
[ 9698.252410] ata1: EH complete
[ 9729.056038] ata1: lost interrupt (Status 0x50)
[ 9729.056077] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9729.056084] ata1.00: failed command: READ DMA
[ 9729.056093] ata1.00: cmd c8/00:48:00:c2:cc/00:00:00:00:00/e5 tag 0 dma 36864 in
[ 9729.056095]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9729.056099] ata1.00: status: { DRDY }
[ 9729.056131] ata1: soft resetting link
[ 9729.292387] ata1.00: configured for UDMA/100
[ 9729.292395] ata1.00: device reported invalid CHS sector 0
[ 9729.292405] ata1: EH complete
[ 9887.008039] ata1: lost interrupt (Status 0x50)
[ 9887.008076] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 9887.008083] ata1.00: failed command: READ DMA
[ 9887.008092] ata1.00: cmd c8/00:08:10:54:c4/00:00:00:00:00/e7 tag 0 dma 4096 in
[ 9887.008094]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9887.008098] ata1.00: status: { DRDY }
[ 9887.008129] ata1: soft resetting link
[ 9887.244391] ata1.00: configured for UDMA/100
[ 9887.244401] ata1.00: device reported invalid CHS sector 0
[ 9887.244420] sd 0:0:0:0: [sda]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 9887.244426] sd 0:0:0:0: [sda]  Sense Key : Aborted Command [current] [descriptor]
[ 9887.244432] Descriptor sense data with sense descriptors (in hex):
[ 9887.244435]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[ 9887.244447]         00 00 00 00 
[ 9887.244452] sd 0:0:0:0: [sda]  Add. Sense: No additional sense information
[ 9887.244458] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 07 c4 54 10 00 00 08 00
[ 9887.244468] end_request: I/O error, dev sda, sector 130307088
[ 9887.244491] ata1: EH complete