[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf7d0000 (usable) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7de000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf7de000 - 00000000bf800000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] DMI: MSI MS-7267/MS-7267, BIOS V17.1 07/11/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbf7d0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 36784000 - 373ba000 [ 0.000000] ACPI: RSDP 000f9de0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT bf7d0000 00034 (v01 A M I OEMRSDT 07000711 MSFT 00000097) [ 0.000000] ACPI: FACP bf7d0200 00084 (v02 A M I OEMFACP 07000711 MSFT 00000097) [ 0.000000] ACPI: DSDT bf7d0440 051C9 (v01 1AAAA 1AAAA000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS bf7de000 00040 [ 0.000000] ACPI: APIC bf7d0390 0006C (v01 A M I OEMAPIC 07000711 MSFT 00000097) [ 0.000000] ACPI: MCFG bf7d0400 0003C (v01 A M I OEMMCFG 07000711 MSFT 00000097) [ 0.000000] ACPI: OEMB bf7de040 00056 (v01 A M I AMI_OEM 07000711 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2175MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bf7d0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf7d0 [ 0.000000] On node 0 totalpages: 784223 [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f4f94200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4352 pages used for memmap [ 0.000000] HighMem zone: 552658 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bf800000 (gap: bf800000:3f600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f4800000 s28800 r0 d24448 u1048576 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778095 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=c8c72760-6f62-47fa-93ae-167dd1540019 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15686400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf7d0) [ 0.000000] Memory: 3074112k/3137344k available (5188k kernel code, 62780k reserved, 2540k data, 700k init, 2228040k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB) [ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f3408000 soft=f340a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2992.410 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.82 BogoMIPS (lpj=11969640) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004042] Security Framework initialized [ 0.004065] AppArmor: AppArmor initialized [ 0.004068] Yama: becoming mindful. [ 0.004151] Mount-cache hash table entries: 512 [ 0.008060] Initializing cgroup subsys ns [ 0.008066] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.008070] Initializing cgroup subsys cpuacct [ 0.008078] Initializing cgroup subsys memory [ 0.008091] Initializing cgroup subsys devices [ 0.008094] Initializing cgroup subsys freezer [ 0.008097] Initializing cgroup subsys net_cls [ 0.008100] Initializing cgroup subsys blkio [ 0.008156] CPU: Physical Processor ID: 0 [ 0.008159] CPU: Processor Core ID: 0 [ 0.008163] mce: CPU supports 4 MCE banks [ 0.008177] CPU0: Thermal monitoring enabled (TM1) [ 0.008182] using mwait in idle threads. [ 0.011726] ACPI: Core revision 20110112 [ 0.016021] ftrace: allocating 23640 entries in 47 pages [ 0.020074] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064775] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 0.068003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.068003] ... version: 0 [ 0.068003] ... bit width: 40 [ 0.068003] ... generic registers: 18 [ 0.068003] ... value mask: 000000ffffffffff [ 0.068003] ... max period: 0000007fffffffff [ 0.068003] ... fixed-purpose events: 0 [ 0.068003] ... event mask: 000000000003ffff [ 0.068003] CPU 1 irqstacks, hard=f34b2000 soft=f34b4000 [ 0.068003] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.156034] Brought up 2 CPUs [ 0.156041] Total of 2 processors activated (11970.16 BogoMIPS). [ 0.156645] devtmpfs: initialized [ 0.157887] print_constraints: dummy: [ 0.157918] Time: 0:14:52 Date: 08/30/11 [ 0.157970] NET: Registered protocol family 16 [ 0.157985] Trying to unpack rootfs image as initramfs... [ 0.158209] EISA bus registered [ 0.158225] ACPI: bus type pci registered [ 0.158367] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) [ 0.158374] PCI: not using MMCONFIG [ 0.158485] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.158489] PCI: Using configuration type 1 for base access [ 0.161959] bio: create slab at 0 [ 0.164474] ACPI: EC: Look up EC in DSDT [ 0.167267] ACPI: Executed 1 blocks of module-level executable AML code [ 0.172787] ACPI Warning: Incorrect checksum in table [SSDT] - 0x45, should be 0x4C (20110112/tbutils-314) [ 0.172801] ACPI: SSDT bf7d5610 002E3 (v01 AMI CPU1PM 00000001 INTL 20051117) [ 0.173413] ACPI: Dynamic OEM Table Load: [ 0.173421] ACPI: SSDT (null) 002E3 (v01 AMI CPU1PM 00000001 INTL 20051117) [ 0.173596] ACPI: SSDT bf7d5900 002DA (v01 AMI CPU2PM 00000001 INTL 20051117) [ 0.174214] ACPI: Dynamic OEM Table Load: [ 0.174221] ACPI: SSDT (null) 002DA (v01 AMI CPU2PM 00000001 INTL 20051117) [ 0.174772] ACPI: Interpreter enabled [ 0.174781] ACPI: (supports S0 S1 S4 S5) [ 0.174832] ACPI: Using IOAPIC for interrupt routing [ 0.174891] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) [ 0.180179] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources [ 0.180188] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!) [ 0.180193] PCI: Using MMCONFIG for extended config space [ 0.194245] ACPI: No dock devices found. [ 0.194251] HEST: Table not found. [ 0.194258] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.194431] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.194773] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.194780] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.194786] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.194792] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.194798] pci_root PNP0A08:00: host bridge window [mem 0xbf800000-0xffffffff] (ignored) [ 0.194818] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600 [ 0.194899] pci 0000:00:02.0: [8086:2772] type 0 class 0x000300 [ 0.194921] pci 0000:00:02.0: reg 10: [mem 0xcfe80000-0xcfefffff] [ 0.194933] pci 0000:00:02.0: reg 14: [io 0xec00-0xec07] [ 0.194945] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref] [ 0.194957] pci 0000:00:02.0: reg 1c: [mem 0xcfe40000-0xcfe7ffff] [ 0.195059] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.195084] pci 0000:00:1b.0: reg 10: [mem 0xcfe3c000-0xcfe3ffff 64bit] [ 0.195164] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.195172] pci 0000:00:1b.0: PME# disabled [ 0.195204] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.195287] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.195294] pci 0000:00:1c.0: PME# disabled [ 0.195328] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 0.195413] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.195423] pci 0000:00:1c.1: PME# disabled [ 0.195463] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.195521] pci 0000:00:1d.0: reg 20: [io 0xe880-0xe89f] [ 0.195567] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.195625] pci 0000:00:1d.1: reg 20: [io 0xe800-0xe81f] [ 0.195671] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.195730] pci 0000:00:1d.2: reg 20: [io 0xe480-0xe49f] [ 0.195776] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.195834] pci 0000:00:1d.3: reg 20: [io 0xe400-0xe41f] [ 0.195892] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.195921] pci 0000:00:1d.7: reg 10: [mem 0xcfe3bc00-0xcfe3bfff] [ 0.196031] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.196039] pci 0000:00:1d.7: PME# disabled [ 0.196068] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.196153] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601 [ 0.196267] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.196283] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.196332] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 [ 0.196352] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.196367] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.196382] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7] [ 0.196397] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb] [ 0.196412] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.196474] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101 [ 0.196499] pci 0000:00:1f.2: reg 10: [io 0xe080-0xe087] [ 0.196513] pci 0000:00:1f.2: reg 14: [io 0xe000-0xe003] [ 0.196526] pci 0000:00:1f.2: reg 18: [io 0xdc00-0xdc07] [ 0.196540] pci 0000:00:1f.2: reg 1c: [io 0xd880-0xd883] [ 0.196553] pci 0000:00:1f.2: reg 20: [io 0xd800-0xd80f] [ 0.196598] pci 0000:00:1f.2: PME# supported from D3hot [ 0.196605] pci 0000:00:1f.2: PME# disabled [ 0.196627] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.196697] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.196801] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.196809] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.196817] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.196828] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.196917] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.196946] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff] [ 0.196990] pci 0000:02:00.0: reg 18: [mem 0xcfbff000-0xcfbfffff 64bit] [ 0.197040] pci 0000:02:00.0: reg 30: [mem 0xcfbc0000-0xcfbdffff pref] [ 0.197104] pci 0000:02:00.0: supports D1 D2 [ 0.197110] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.197120] pci 0000:02:00.0: PME# disabled [ 0.197151] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.197169] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.197177] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.197185] pci 0000:00:1c.1: bridge window [mem 0xcfb00000-0xcfbfffff] [ 0.197196] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.197246] pci 0000:03:00.0: [1814:0201] type 0 class 0x000280 [ 0.197272] pci 0000:03:00.0: reg 10: [mem 0xcfcfe000-0xcfcfffff] [ 0.197424] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.197433] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.197441] pci 0000:00:1e.0: bridge window [mem 0xcfc00000-0xcfcfffff] [ 0.197452] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.197458] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.197464] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.197487] pci_bus 0000:00: on NUMA node 0 [ 0.197494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.197767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.197850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.197986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.198106] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.205668] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.205787] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.205903] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.206027] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.206143] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.206260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.206378] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.206497] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.206704] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.206730] vgaarb: loaded [ 0.207196] SCSI subsystem initialized [ 0.207297] libata version 3.00 loaded. [ 0.207407] usbcore: registered new interface driver usbfs [ 0.207436] usbcore: registered new interface driver hub [ 0.207494] usbcore: registered new device driver usb [ 0.207734] wmi: Mapper loaded [ 0.207739] PCI: Using ACPI for IRQ routing [ 0.207747] PCI: pci_cache_line_size set to 64 bytes [ 0.207863] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.207869] reserve RAM buffer: 00000000bf7d0000 - 00000000bfffffff [ 0.208089] NetLabel: Initializing [ 0.208094] NetLabel: domain hash size = 128 [ 0.208097] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.208118] NetLabel: unlabeled traffic allowed by default [ 0.208280] hpet clockevent registered [ 0.208286] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.208295] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.208305] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.212187] Switching to clocksource hpet [ 0.215154] Switched to NOHz mode on CPU #0 [ 0.215287] Switched to NOHz mode on CPU #1 [ 0.228319] AppArmor: AppArmor Filesystem Enabled [ 0.228371] pnp: PnP ACPI init [ 0.228409] ACPI: bus type pnp registered [ 0.228614] pnp 00:00: [bus 00-ff] [ 0.228620] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.228626] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.228631] pnp 00:00: [io 0x0d00-0xffff window] [ 0.228637] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.228642] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.228648] pnp 00:00: [mem 0xbf800000-0xffffffff window] [ 0.228768] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.228793] pnp 00:01: [mem 0xfed13000-0xfed19fff] [ 0.228899] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved [ 0.228909] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.228978] pnp 00:02: [dma 4] [ 0.228984] pnp 00:02: [io 0x0000-0x000f] [ 0.228988] pnp 00:02: [io 0x0081-0x0083] [ 0.228993] pnp 00:02: [io 0x0087] [ 0.228997] pnp 00:02: [io 0x0089-0x008b] [ 0.229001] pnp 00:02: [io 0x008f] [ 0.229006] pnp 00:02: [io 0x00c0-0x00df] [ 0.229077] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.229104] pnp 00:03: [io 0x0070-0x0071] [ 0.229121] pnp 00:03: [irq 8] [ 0.229187] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.229209] pnp 00:04: [io 0x0061] [ 0.229271] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.229295] pnp 00:05: [io 0x00f0-0x00ff] [ 0.229307] pnp 00:05: [irq 13] [ 0.229375] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.229965] pnp 00:06: [io 0x03f8-0x03ff] [ 0.229976] pnp 00:06: [irq 4] [ 0.229981] pnp 00:06: [dma 0 disabled] [ 0.230127] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.230801] pnp 00:07: [io 0x03f0-0x03f5] [ 0.230807] pnp 00:07: [io 0x03f7] [ 0.230816] pnp 00:07: [irq 6] [ 0.230821] pnp 00:07: [dma 2] [ 0.230946] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.231712] pnp 00:08: [io 0x0378-0x037f] [ 0.231723] pnp 00:08: [irq 7] [ 0.231729] pnp 00:08: [dma 0 disabled] [ 0.232065] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.232134] pnp 00:09: [io 0x0060] [ 0.232139] pnp 00:09: [io 0x0064] [ 0.232152] pnp 00:09: [irq 1] [ 0.232224] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.232330] pnp 00:0a: [irq 12] [ 0.232402] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.232631] pnp 00:0b: [io 0x0000-0xffffffff disabled] [ 0.232637] pnp 00:0b: [io 0x0a00-0x0adf] [ 0.232641] pnp 00:0b: [io 0x0ae0-0x0aef] [ 0.232746] system 00:0b: [io 0x0a00-0x0adf] has been reserved [ 0.232752] system 00:0b: [io 0x0ae0-0x0aef] has been reserved [ 0.232760] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.233011] pnp 00:0c: [io 0x0010-0x001f] [ 0.233017] pnp 00:0c: [io 0x0022-0x003f] [ 0.233021] pnp 00:0c: [io 0x0044-0x005f] [ 0.233026] pnp 00:0c: [io 0x0062-0x0063] [ 0.233030] pnp 00:0c: [io 0x0065-0x006f] [ 0.233035] pnp 00:0c: [io 0x0072-0x007f] [ 0.233039] pnp 00:0c: [io 0x0080] [ 0.233044] pnp 00:0c: [io 0x0084-0x0086] [ 0.233048] pnp 00:0c: [io 0x0088] [ 0.233052] pnp 00:0c: [io 0x008c-0x008e] [ 0.233057] pnp 00:0c: [io 0x0090-0x009f] [ 0.233061] pnp 00:0c: [io 0x00a2-0x00bf] [ 0.233066] pnp 00:0c: [io 0x00e0-0x00ef] [ 0.233070] pnp 00:0c: [io 0x04d0-0x04d1] [ 0.233075] pnp 00:0c: [io 0x0800-0x087f] [ 0.233080] pnp 00:0c: [io 0x0400-0x041f] [ 0.233084] pnp 00:0c: [io 0x0480-0x04bf] [ 0.233089] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] [ 0.233096] pnp 00:0c: [mem 0xfed20000-0xfed8ffff] [ 0.233102] pnp 00:0c: [mem 0xffb80000-0xfffffffe] [ 0.233236] system 00:0c: [io 0x04d0-0x04d1] has been reserved [ 0.233244] system 00:0c: [io 0x0800-0x087f] has been reserved [ 0.233250] system 00:0c: [io 0x0400-0x041f] has been reserved [ 0.233256] system 00:0c: [io 0x0480-0x04bf] has been reserved [ 0.233263] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.233269] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.233276] system 00:0c: [mem 0xffb80000-0xfffffffe] could not be reserved [ 0.233283] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.233460] pnp 00:0d: [mem 0xfec00000-0xfec00fff] [ 0.233466] pnp 00:0d: [mem 0xfee00000-0xfee00fff] [ 0.233573] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.233582] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.233590] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.233671] pnp 00:0e: [mem 0xf0000000-0xf3ffffff] [ 0.233779] system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.233787] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.234207] pnp 00:0f: [mem 0x00000000-0x0009ffff] [ 0.234213] pnp 00:0f: [mem 0x000c0000-0x000cffff] [ 0.234219] pnp 00:0f: [mem 0x000e0000-0x000fffff] [ 0.234224] pnp 00:0f: [mem 0x00100000-0xbf7fffff] [ 0.234229] pnp 00:0f: [mem 0x00000000-0xffffffff disabled] [ 0.234356] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.234364] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.234370] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.234376] system 00:0f: [mem 0x00100000-0xbf7fffff] could not be reserved [ 0.234384] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.234712] pnp: PnP ACPI: found 16 devices [ 0.234716] ACPI: ACPI bus type pnp unregistered [ 0.234722] PnPBIOS: Disabled by ACPI PNP [ 0.273828] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] [ 0.273839] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.273847] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.273855] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.273861] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.273868] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.273877] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 0.273885] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.273896] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.273903] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.273912] pci 0000:00:1c.1: bridge window [mem 0xcfb00000-0xcfbfffff] [ 0.273920] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.273930] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.273935] pci 0000:00:1e.0: bridge window [io disabled] [ 0.273943] pci 0000:00:1e.0: bridge window [mem 0xcfc00000-0xcfcfffff] [ 0.273951] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.273967] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.273992] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.274001] pci 0000:00:1c.0: setting latency timer to 64 [ 0.274022] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.274030] pci 0000:00:1c.1: setting latency timer to 64 [ 0.274045] pci 0000:00:1e.0: setting latency timer to 64 [ 0.274053] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.274060] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.274066] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.274071] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc01fffff] [ 0.274077] pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.274083] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.274088] pci_bus 0000:02: resource 1 [mem 0xcfb00000-0xcfbfffff] [ 0.274093] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.274099] pci_bus 0000:03: resource 1 [mem 0xcfc00000-0xcfcfffff] [ 0.274105] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.274110] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] [ 0.274176] NET: Registered protocol family 2 [ 0.274326] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.274792] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.275425] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.275759] TCP: Hash tables configured (established 131072 bind 65536) [ 0.275765] TCP reno registered [ 0.275771] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.275784] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.275966] NET: Registered protocol family 1 [ 0.275999] pci 0000:00:02.0: Boot video device [ 0.276181] PCI: CLS 32 bytes, default 64 [ 0.276554] cpufreq-nforce2: No nForce2 chipset. [ 0.276823] audit: initializing netlink socket (disabled) [ 0.276838] type=2000 audit(1314663292.272:1): initialized [ 0.291324] highmem bounce pool size: 64 pages [ 0.291336] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.295636] VFS: Disk quotas dquot_6.5.2 [ 0.295778] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.297396] fuse init (API version 7.16) [ 0.297622] msgmni has been set to 1652 [ 0.298120] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.298173] io scheduler noop registered [ 0.298177] io scheduler deadline registered [ 0.298213] io scheduler cfq registered (default) [ 0.298427] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.298498] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.298605] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.298662] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.298828] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.298884] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.299227] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.299238] ACPI: Power Button [PWRB] [ 0.299355] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.299363] ACPI: Power Button [PWRF] [ 0.299691] ACPI: acpi_idle registered with cpuidle [ 0.303013] ERST: Table is not found! [ 0.303138] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.323586] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.323792] isapnp: Scanning for PnP cards... [ 0.624356] Freeing initrd memory: 12504k freed [ 0.677294] isapnp: No Plug & Play device found [ 0.707194] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.707693] Linux agpgart interface v0.103 [ 0.707810] agpgart-intel 0000:00:00.0: Intel 945G Chipset [ 0.707939] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 0.708821] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.708971] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.711112] brd: module loaded [ 0.712158] loop: module loaded [ 0.712302] i2c-core: driver [adp5520] using legacy suspend method [ 0.712306] i2c-core: driver [adp5520] using legacy resume method [ 0.712455] ata_piix 0000:00:1f.1: version 2.13 [ 0.712484] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.712530] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.713068] scsi0 : ata_piix [ 0.713210] scsi1 : ata_piix [ 0.715223] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.715227] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.715271] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.715282] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.715337] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.715904] scsi2 : ata_piix [ 0.716048] scsi3 : ata_piix [ 0.718347] ata3: SATA max UDMA/133 cmd 0xe080 ctl 0xe000 bmdma 0xd800 irq 19 [ 0.718352] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd808 irq 19 [ 0.719066] Fixed MDIO Bus: probed [ 0.719131] PPP generic driver version 2.4.2 [ 0.719209] tun: Universal TUN/TAP device driver, 1.6 [ 0.719213] tun: (C) 1999-2004 Max Krasnyansky [ 0.719362] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.719393] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.719413] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.719418] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.719484] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.736059] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.736075] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.739966] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.739987] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xcfe3bc00 [ 0.752021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.752228] hub 1-0:1.0: USB hub found [ 0.752236] hub 1-0:1.0: 8 ports detected [ 0.752364] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.752387] uhci_hcd: USB Universal Host Controller Interface driver [ 0.752421] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.752430] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.752434] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.752496] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.752554] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e880 [ 0.752756] hub 2-0:1.0: USB hub found [ 0.752764] hub 2-0:1.0: 2 ports detected [ 0.752872] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.752881] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.752886] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.752949] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.753007] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 0.753209] hub 3-0:1.0: USB hub found [ 0.753217] hub 3-0:1.0: 2 ports detected [ 0.753320] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.753329] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.753333] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.753398] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.756080] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480 [ 0.756289] hub 4-0:1.0: USB hub found [ 0.756297] hub 4-0:1.0: 2 ports detected [ 0.756404] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.756413] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.756417] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.756481] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.756549] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 0.756763] hub 5-0:1.0: USB hub found [ 0.756771] hub 5-0:1.0: 2 ports detected [ 0.757014] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.759189] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.759199] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.759408] mousedev: PS/2 mouse device common for all mice [ 0.759613] rtc_cmos 00:03: RTC can wake from S4 [ 0.759718] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.759747] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.759877] device-mapper: uevent: version 1.0.3 [ 0.760005] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.760130] device-mapper: multipath: version 1.2.0 loaded [ 0.760136] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.760249] EISA: Probing bus 0 at eisa.0 [ 0.760256] Cannot allocate resource for EISA slot 1 [ 0.760281] EISA: Detected 0 cards. [ 0.760378] cpuidle: using governor ladder [ 0.760383] cpuidle: using governor menu [ 0.760827] TCP cubic registered [ 0.761033] NET: Registered protocol family 10 [ 0.761968] NET: Registered protocol family 17 [ 0.761991] Registering the dns_resolver key type [ 0.762870] Using IPI No-Shortcut mode [ 0.763023] PM: Hibernation image not present or could not be loaded. [ 0.763040] registered taskstats version 1 [ 0.763342] Magic number: 7:431:204 [ 0.763439] rtc_cmos 00:03: setting system clock to 2011-08-30 00:14:53 UTC (1314663293) [ 0.763444] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.763446] EDD information not available. [ 0.778282] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.889777] ata1.00: ATA-5: MAXTOR 6L020J1, A93.0500, max UDMA/133 [ 0.889784] ata1.00: 40132503 sectors, multi 16: LBA [ 0.904377] ata1.00: configured for UDMA/100 [ 0.904550] scsi 0:0:0:0: Direct-Access ATA MAXTOR 6L020J1 A93. PQ: 0 ANSI: 5 [ 0.904854] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.905014] sd 0:0:0:0: [sda] 40132503 512-byte logical blocks: (20.5 GB/19.1 GiB) [ 0.905122] sd 0:0:0:0: [sda] Write Protect is off [ 0.905127] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.905174] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.907124] ata4.01: failed to IDENTIFY (I/O error, err_mask=0x2) [ 0.936296] sda: sda1 sda2 < sda5 > [ 0.936832] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.064023] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.276020] Refined TSC clocksource calibration: 2992.499 MHz. [ 1.276026] Switching to clocksource tsc [ 1.308020] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 5.876099] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100 [ 5.884964] ata3.01: ATA-7: WDC WD1600AAJS-22PSA0, 05.06H05, max UDMA/133 [ 5.884969] ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 5.900142] ata3.00: configured for UDMA/100 [ 5.916601] ata3.01: configured for UDMA/133 [ 5.918041] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB00 PQ: 0 ANSI: 5 [ 5.920690] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.920695] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.920867] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 5.920963] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 5.921740] scsi 2:0:1:0: Direct-Access ATA WDC WD1600AAJS-2 05.0 PQ: 0 ANSI: 5 [ 5.921951] sd 2:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 5.922024] sd 2:0:1:0: Attached scsi generic sg2 type 0 [ 5.922081] sd 2:0:1:0: [sdb] Write Protect is off [ 5.922088] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.922146] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.950671] sdb: sdb1 sdb2 < sdb5 > [ 5.951172] sd 2:0:1:0: [sdb] Attached SCSI disk [ 6.058804] ata4.01: failed to IDENTIFY (I/O error, err_mask=0x2) [ 11.214805] ata4.01: failed to IDENTIFY (I/O error, err_mask=0x2) [ 16.344133] Freeing unused kernel memory: 700k freed [ 16.344520] Write protecting the kernel text: 5192k [ 16.344587] Write protecting the kernel read-only data: 2148k [ 16.381447] <30>udev[70]: starting version 167 [ 16.633921] Floppy drive(s): fd0 is 1.44M [ 16.638318] usbcore: registered new interface driver uas [ 16.651825] FDC 0 is a post-1991 82077 [ 16.665194] Initializing USB Mass Storage driver... [ 16.666976] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 16.667011] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 16.667070] r8169 0000:02:00.0: setting latency timer to 64 [ 16.667166] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 16.668985] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8022000, 00:19:db:c8:c9:ca, XID 18000000 IRQ 42 [ 16.669013] scsi4 : usb-storage 1-6:1.0 [ 16.671785] usbcore: registered new interface driver usb-storage [ 16.671792] USB Mass Storage support registered. [ 16.895311] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 16.895317] EXT4-fs (sda1): write access will be enabled during recovery [ 16.938975] EXT4-fs (sda1): recovery complete [ 16.939516] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.673264] scsi 4:0:0:0: Direct-Access TOSHIBA USB 3.5"-HDD 100 PQ: 0 ANSI: 2 [ 17.674144] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 17.674855] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 17.677101] sd 4:0:0:0: [sdc] Write Protect is off [ 17.677107] sd 4:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 17.678098] sd 4:0:0:0: [sdc] Incomplete mode parameter data [ 17.678102] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 17.682348] sd 4:0:0:0: [sdc] Incomplete mode parameter data [ 17.682353] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 25.239088] sdc: sdc1 [ 25.243473] sd 4:0:0:0: [sdc] Incomplete mode parameter data [ 25.243478] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 25.243482] sd 4:0:0:0: [sdc] Attached SCSI disk [ 31.421008] Adding 3135484k swap on /dev/sda5. Priority:-1 extents:1 across:3135484k [ 31.453919] <30>udev[288]: starting version 167 [ 31.510486] lp: driver loaded but no devices found [ 31.559917] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 31.805608] type=1400 audit(1314663324.537:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=463 comm="apparmor_parser" [ 31.806737] type=1400 audit(1314663324.537:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=463 comm="apparmor_parser" [ 31.807450] type=1400 audit(1314663324.537:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=463 comm="apparmor_parser" [ 32.104265] intel_rng: FWH not detected [ 32.181235] leds_ss4200: no LED devices found [ 32.226384] r8169 0000:02:00.0: eth0: link down [ 32.226889] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.485221] parport_pc 00:08: reported by Plug and Play ACPI [ 32.485274] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 32.577632] lp0: using parport0 (interrupt-driven). [ 32.719251] [drm] Initialized drm 1.1.0 20060810 [ 32.776514] type=1400 audit(1314663325.509:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=641 comm="apparmor_parser" [ 32.778669] type=1400 audit(1314663325.509:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 32.780106] type=1400 audit(1314663325.513:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 32.782105] type=1400 audit(1314663325.513:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 32.816291] type=1400 audit(1314663325.549:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=647 comm="apparmor_parser" [ 32.817631] type=1400 audit(1314663325.549:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=647 comm="apparmor_parser" [ 32.821554] type=1400 audit(1314663325.553:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=644 comm="apparmor_parser" [ 33.027228] psmouse serio1: ID: 10 00 64 [ 33.033006] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7611 [ 33.033288] usbcore: registered new interface driver usblp [ 33.231867] input: PS2++ Logitech TrackMan as /devices/platform/i8042/serio1/input/input3 [ 33.322137] ppdev: user-space parallel port driver [ 33.334102] cfg80211: Calling CRDA to update world regulatory domain [ 33.448976] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 33.448988] i915 0000:00:02.0: setting latency timer to 64 [ 33.481078] cfg80211: World regulatory domain updated: [ 33.481086] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 33.481092] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.481098] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.481104] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.481110] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.481115] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.584194] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 33.584202] [drm] Driver supports precise vblank timestamp query. [ 33.613414] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 33.613878] [drm] initialized overlay support [ 33.715752] rt2500pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 33.734598] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 33.734607] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734612] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 33.734619] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734624] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 33.734630] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734634] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 33.734640] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734645] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 33.734651] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734656] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 33.734662] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734667] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 33.734673] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734678] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 33.734683] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734688] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 33.734694] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734699] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 33.734705] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734710] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 33.734716] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734721] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 33.734726] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734731] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 33.734737] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.734742] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 33.734748] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 33.761669] Console: switching to colour frame buffer device 160x64 [ 33.761743] fb0: inteldrmfb frame buffer device [ 33.761748] drm: registered panic notifier [ 33.762035] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 33.762209] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 33.762306] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 33.762352] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 33.923720] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 33.926270] Registered led device: rt2500pci-phy0::radio [ 33.926453] Registered led device: rt2500pci-phy0::quality [ 34.224910] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.380915] usb 1-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 39.728066] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 84.687399] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 154.901929] r8169 0000:02:00.0: eth0: link up [ 154.902109] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 165.552023] eth0: no IPv6 routers present