[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19 01:38:40 UTC 2010 (Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=/dev/sdc1 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] modified: 000000007ffb0000 - 000000007ffc0000 (ACPI data) [ 0.000000] modified: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) [ 0.000000] modified: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffb0000 [ 0.000000] Warning: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ffb0000 page 4k [ 0.000000] kernel direct mapping tables up to 7ffb0000 @ 10000-14000 [ 0.000000] RAMDISK: 377b0000 - 37fef5bb [ 0.000000] ACPI: RSDP 00000000000f8860 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000007ffb0000 00038 (v01 A M I OEMRSDT 09000830 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ffb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007ffb0450 04B66 (v01 4CDS2 4CDS2204 00000204 INTL 02002026) [ 0.000000] ACPI: FACS 000000007ffc0000 00040 [ 0.000000] ACPI: APIC 000000007ffb0390 00078 (v01 A M I OEMAPIC 09000830 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ffb0410 0003C (v01 A M I OEMMCFG 09000830 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ffc0040 00051 (v01 A M I AMI_OEM 09000830 MSFT 00000097) [ 0.000000] ACPI: HPET 000000007ffb4fc0 00038 (v01 A M I VT-8237S 09000830 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ffb0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffb0000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000026ff7] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ffb0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377b0000 - 0037fef5bb] RAMDISK ==> [00377b0000 - 0037fef5bb] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a3012f] BRK ==> [0001a30000 - 0001a3012f] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffb0 [ 0.000000] On node 0 totalpages: 524095 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 101 pages reserved [ 0.000000] DMA zone: 3826 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 513001 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516827 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=/dev/sdc1 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ f8000000 old size 32 MB [ 0.000000] Aperture from AGP @ f8000000 size 64 MB (APSIZE f30) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2048180k/2096832k available (5422k kernel code, 452k absent, 48200k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:848 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2892.284 MHz processor. [ 0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5784.56 BogoMIPS (lpj=28922840) [ 0.010033] Security Framework initialized [ 0.010053] AppArmor: AppArmor initialized [ 0.010210] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011310] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.011918] Mount-cache hash table entries: 256 [ 0.012066] Initializing cgroup subsys ns [ 0.012072] Initializing cgroup subsys cpuacct [ 0.012075] Initializing cgroup subsys memory [ 0.012083] Initializing cgroup subsys devices [ 0.012085] Initializing cgroup subsys freezer [ 0.012086] Initializing cgroup subsys net_cls [ 0.012107] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.012109] CPU: L2 cache: 2048K [ 0.012112] CPU 0/0x0 -> Node 0 [ 0.012113] CPU: Physical Processor ID: 0 [ 0.012114] CPU: Processor Core ID: 0 [ 0.012118] mce: CPU supports 6 MCE banks [ 0.012125] CPU0: Thermal monitoring enabled (TM2) [ 0.012130] using mwait in idle threads. [ 0.012131] Performance Events: Core2 events, Intel PMU driver. [ 0.012137] ... version: 2 [ 0.012138] ... bit width: 40 [ 0.012139] ... generic registers: 2 [ 0.012140] ... value mask: 000000ffffffffff [ 0.012142] ... max period: 000000007fffffff [ 0.012143] ... fixed-purpose events: 3 [ 0.012144] ... event mask: 0000000700000003 [ 0.014019] ACPI: Core revision 20090903 [ 0.030005] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030010] ftrace: allocating 22527 entries in 89 pages [ 0.040058] Setting APIC routing to flat [ 0.040504] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.146324] CPU0: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 2048K [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] CPU1: Thermal monitoring enabled (TM2) [ 0.300022] CPU1: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d [ 0.300029] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.310018] Brought up 2 CPUs [ 0.310020] Total of 2 processors activated (11569.12 BogoMIPS). [ 0.310366] CPU0 attaching sched-domain: [ 0.310368] domain 0: span 0-1 level MC [ 0.310370] groups: 0 1 [ 0.310375] CPU1 attaching sched-domain: [ 0.310376] domain 0: span 0-1 level MC [ 0.310378] groups: 1 0 [ 0.310456] devtmpfs: initialized [ 0.310456] regulator: core version 0.5 [ 0.310456] Time: 20:11:26 Date: 08/30/10 [ 0.310456] NET: Registered protocol family 16 [ 0.310456] Trying to unpack rootfs image as initramfs... [ 0.310456] ACPI: bus type pci registered [ 0.310456] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.310456] PCI: Not using MMCONFIG. [ 0.310456] PCI: Using configuration type 1 for base access [ 0.320170] bio: create slab at 0 [ 0.320715] ACPI: EC: Look up EC in DSDT [ 0.323104] ACPI: Executed 1 blocks of module-level executable AML code [ 0.326494] ACPI: Interpreter enabled [ 0.326499] ACPI: (supports S0 S1 S3 S4 S5) [ 0.326521] ACPI: Using IOAPIC for interrupt routing [ 0.326564] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.329766] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.332054] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.337544] ACPI Warning: Incorrect checksum in table [OEMB] - 75, should be 68 (20090903/tbutils-314) [ 0.337637] ACPI: No dock devices found. [ 0.337861] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.337910] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff] [ 0.338311] pci 0000:00:01.0: supports D1 [ 0.338373] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.338377] pci 0000:00:02.0: PME# disabled [ 0.338433] pci 0000:00:0f.0: reg 10 io port: [0xcc00-0xcc07] [ 0.338439] pci 0000:00:0f.0: reg 14 io port: [0xc880-0xc883] [ 0.338445] pci 0000:00:0f.0: reg 18 io port: [0xc800-0xc807] [ 0.338451] pci 0000:00:0f.0: reg 1c io port: [0xc480-0xc483] [ 0.338456] pci 0000:00:0f.0: reg 20 io port: [0xc400-0xc40f] [ 0.338462] pci 0000:00:0f.0: reg 24 io port: [0xc000-0xc0ff] [ 0.338537] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.338618] pci 0000:00:10.0: reg 20 io port: [0xb480-0xb49f] [ 0.338644] pci 0000:00:10.0: supports D1 D2 [ 0.338646] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338650] pci 0000:00:10.0: PME# disabled [ 0.338697] pci 0000:00:10.1: reg 20 io port: [0xb800-0xb81f] [ 0.338723] pci 0000:00:10.1: supports D1 D2 [ 0.338724] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338727] pci 0000:00:10.1: PME# disabled [ 0.338777] pci 0000:00:10.2: reg 20 io port: [0xb880-0xb89f] [ 0.338803] pci 0000:00:10.2: supports D1 D2 [ 0.338804] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338808] pci 0000:00:10.2: PME# disabled [ 0.338855] pci 0000:00:10.3: reg 20 io port: [0xbc00-0xbc1f] [ 0.338880] pci 0000:00:10.3: supports D1 D2 [ 0.338882] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338885] pci 0000:00:10.3: PME# disabled [ 0.338925] pci 0000:00:10.4: reg 10 32bit mmio: [0xfe9ffc00-0xfe9ffcff] [ 0.338971] pci 0000:00:10.4: supports D1 D2 [ 0.338973] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338976] pci 0000:00:10.4: PME# disabled [ 0.339316] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.339322] pci 0000:01:00.0: reg 14 io port: [0xd000-0xd0ff] [ 0.339328] pci 0000:01:00.0: reg 18 32bit mmio: [0xfeaf0000-0xfeafffff] [ 0.339347] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeac0000-0xfeadffff] [ 0.339371] pci 0000:01:00.0: supports D1 D2 [ 0.339411] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.339414] pci 0000:00:01.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.339418] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.339469] pci 0000:00:02.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.339508] pci 0000:03:04.0: reg 10 io port: [0xe800-0xe8ff] [ 0.339514] pci 0000:03:04.0: reg 14 32bit mmio: [0xfebffc00-0xfebffcff] [ 0.339538] pci 0000:03:04.0: reg 30 32bit mmio pref: [0xfebe0000-0xfebeffff] [ 0.339556] pci 0000:03:04.0: supports D1 D2 [ 0.339557] pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.339561] pci 0000:03:04.0: PME# disabled [ 0.339594] pci 0000:03:06.0: reg 10 io port: [0xe400-0xe4ff] [ 0.339638] pci 0000:03:06.0: supports D1 D2 [ 0.339673] pci 0000:00:13.1: transparent bridge [ 0.339676] pci 0000:00:13.1: bridge io port: [0xe000-0xefff] [ 0.339680] pci 0000:00:13.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.339704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.339811] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.339843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] [ 0.339937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] [ 0.349612] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.349697] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.349780] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.349859] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.349941] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.350052] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.350139] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.350232] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.350343] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.350346] vgaarb: loaded [ 0.350448] SCSI subsystem initialized [ 0.350531] libata version 3.00 loaded. [ 0.350589] usbcore: registered new interface driver usbfs [ 0.350598] usbcore: registered new interface driver hub [ 0.350620] usbcore: registered new device driver usb [ 0.350723] ACPI: WMI: Mapper loaded [ 0.350725] PCI: Using ACPI for IRQ routing [ 0.350885] NetLabel: Initializing [ 0.350887] NetLabel: domain hash size = 128 [ 0.350888] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.350901] NetLabel: unlabeled traffic allowed by default [ 0.350928] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.350932] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.360035] Switching to clocksource tsc [ 0.361509] AppArmor: AppArmor Filesystem Enabled [ 0.361526] pnp: PnP ACPI init [ 0.361545] ACPI: bus type pnp registered [ 0.365041] pnp: PnP ACPI: found 14 devices [ 0.365043] ACPI: ACPI bus type pnp unregistered [ 0.365055] system 00:06: ioport range 0x295-0x296 has been reserved [ 0.365057] system 00:06: ioport range 0x3e0-0x3e7 has been reserved [ 0.365059] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.365061] system 00:06: ioport range 0x800-0x87f has been reserved [ 0.365063] system 00:06: ioport range 0x400-0x41f has been reserved [ 0.365065] system 00:06: iomem range 0xfecc0000-0xfecc0fff could not be reserved [ 0.365070] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.365073] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.365077] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.365081] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.365083] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.365085] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.365087] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved [ 0.365089] system 00:0d: iomem range 0xff780000-0xffffffff has been reserved [ 0.369757] pci 0000:03:04.0: BAR 6: address space collision on of device [0xfebe0000-0xfebeffff] [ 0.369783] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.369785] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.369790] pci 0000:00:01.0: MEM window: 0xfea00000-0xfeafffff [ 0.369793] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.369799] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.369801] pci 0000:00:02.0: IO window: 0x1000-0x1fff [ 0.369807] pci 0000:00:02.0: MEM window: 0x80000000-0x803fffff [ 0.369811] pci 0000:00:02.0: PREFETCH window: 0xfdf00000-0xfdffffff [ 0.369819] pci 0000:00:13.1: PCI bridge, secondary bus 0000:03 [ 0.369821] pci 0000:00:13.1: IO window: 0xe000-0xefff [ 0.369826] pci 0000:00:13.1: MEM window: 0xfeb00000-0xfebfffff [ 0.369830] pci 0000:00:13.1: PREFETCH window: 0x80400000-0x804fffff [ 0.369847] pci 0000:00:01.0: setting latency timer to 64 [ 0.369855] pci 0000:00:02.0: enabling device (0106 -> 0107) [ 0.369861] alloc irq_desc for 27 on node -1 [ 0.369863] alloc kstat_irqs on node -1 [ 0.369868] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 [ 0.369872] pci 0000:00:02.0: setting latency timer to 64 [ 0.369878] pci 0000:00:13.1: setting latency timer to 64 [ 0.369881] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.369883] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.369885] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.369887] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.369889] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.369890] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.369892] pci_bus 0000:02: resource 1 mem: [0x80000000-0x803fffff] [ 0.369894] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.369896] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.369897] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.369899] pci_bus 0000:03: resource 2 pref mem [0x80400000-0x804fffff] [ 0.369900] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.369902] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.369936] NET: Registered protocol family 2 [ 0.370052] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.370708] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.373231] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.373899] TCP: Hash tables configured (established 262144 bind 65536) [ 0.373901] TCP reno registered [ 0.374033] NET: Registered protocol family 1 [ 0.374056] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.374137] pci 0000:01:00.0: Boot video device [ 0.374344] Scanning for low memory corruption every 60 seconds [ 0.374465] audit: initializing netlink socket (disabled) [ 0.374475] type=2000 audit(1283199086.369:1): initialized [ 0.381490] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.382534] VFS: Disk quotas dquot_6.5.2 [ 0.382580] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.383047] fuse init (API version 7.13) [ 0.383109] msgmni has been set to 4000 [ 0.383280] alg: No test for stdrng (krng) [ 0.383329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.383331] io scheduler noop registered [ 0.383333] io scheduler anticipatory registered [ 0.383334] io scheduler deadline registered [ 0.383359] io scheduler cfq registered (default) [ 0.383523] alloc irq_desc for 48 on node -1 [ 0.383525] alloc kstat_irqs on node -1 [ 0.383536] pcieport 0000:00:02.0: irq 48 for MSI/MSI-X [ 0.383545] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.383816] aer 0000:00:02.0:pcie02: service driver aer loaded [ 0.383823] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.383830] Firmware did not grant requested _OSC control [ 0.383851] Firmware did not grant requested _OSC control [ 0.383861] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.383959] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.383965] ACPI: Sleep Button [SLPB] [ 0.384000] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.384002] ACPI: Power Button [PWRB] [ 0.384032] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.384033] ACPI: Power Button [PWRF] [ 0.384259] processor LNXCPU:00: registered as cooling_device0 [ 0.384288] processor LNXCPU:01: registered as cooling_device1 [ 0.387985] Linux agpgart interface v0.103 [ 0.388020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.388105] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.388387] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.389168] brd: module loaded [ 0.389524] loop: module loaded [ 0.389591] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.389757] alloc irq_desc for 21 on node -1 [ 0.389759] alloc kstat_irqs on node -1 [ 0.389768] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.389806] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.390044] Fixed MDIO Bus: probed [ 0.390072] PPP generic driver version 2.4.2 [ 0.390096] tun: Universal TUN/TAP device driver, 1.6 [ 0.390097] tun: (C) 1999-2004 Max Krasnyansky [ 0.390161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.390176] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.390192] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.390218] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.390241] ehci_hcd 0000:00:10.4: debug port 1 [ 0.390261] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfe9ffc00 [ 0.409692] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.409824] usb usb1: configuration #1 chosen from 1 choice [ 0.409847] hub 1-0:1.0: USB hub found [ 0.409857] hub 1-0:1.0: 8 ports detected [ 0.409914] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.409929] uhci_hcd: USB Universal Host Controller Interface driver [ 0.409977] alloc irq_desc for 20 on node -1 [ 0.409978] alloc kstat_irqs on node -1 [ 0.409984] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.409992] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.410020] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.410054] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b480 [ 0.410117] usb usb2: configuration #1 chosen from 1 choice [ 0.410137] hub 2-0:1.0: USB hub found [ 0.410143] hub 2-0:1.0: 2 ports detected [ 0.410176] alloc irq_desc for 22 on node -1 [ 0.410177] alloc kstat_irqs on node -1 [ 0.410180] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.410185] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.410208] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.410235] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b800 [ 0.410305] usb usb3: configuration #1 chosen from 1 choice [ 0.410322] hub 3-0:1.0: USB hub found [ 0.410328] hub 3-0:1.0: 2 ports detected [ 0.410364] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.410368] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.410390] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.410408] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880 [ 0.410472] usb usb4: configuration #1 chosen from 1 choice [ 0.410490] hub 4-0:1.0: USB hub found [ 0.410496] hub 4-0:1.0: 2 ports detected [ 0.410531] alloc irq_desc for 23 on node -1 [ 0.410532] alloc kstat_irqs on node -1 [ 0.410535] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.410540] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.410571] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.410597] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00 [ 0.410660] usb usb5: configuration #1 chosen from 1 choice [ 0.410678] hub 5-0:1.0: USB hub found [ 0.410683] hub 5-0:1.0: 2 ports detected [ 0.410751] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 0.410752] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 0.411115] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.411120] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.411223] mice: PS/2 mouse device common for all mice [ 0.411324] rtc_cmos 00:08: RTC can wake from S4 [ 0.411364] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.411393] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.411492] device-mapper: uevent: version 1.0.3 [ 0.411598] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.411647] device-mapper: multipath: version 1.1.0 loaded [ 0.411649] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.411768] cpuidle: using governor ladder [ 0.411769] cpuidle: using governor menu [ 0.412032] TCP cubic registered [ 0.412127] NET: Registered protocol family 10 [ 0.412473] lo: Disabled Privacy Extensions [ 0.412678] NET: Registered protocol family 17 [ 0.412774] PM: Resume from disk failed. [ 0.412786] registered taskstats version 1 [ 0.413114] Magic number: 6:7:196 [ 0.413200] rtc_cmos 00:08: setting system clock to 2010-08-30 20:11:26 UTC (1283199086) [ 0.413202] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.413203] EDD information not available. [ 0.454683] Freeing initrd memory: 8445k freed [ 0.458455] Freeing unused kernel memory: 880k freed [ 0.458865] Write protecting the kernel read-only data: 7696k [ 0.470015] udev: starting version 151 [ 0.514761] sata_via 0000:00:0f.0: version 2.4 [ 0.514775] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.514804] sata_via 0000:00:0f.0: routed to hard irq line 5 [ 0.519630] scsi0 : sata_via [ 0.523336] scsi1 : sata_via [ 0.524564] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21 [ 0.524567] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21 [ 0.524621] pata_via 0000:00:0f.1: version 0.3.4 [ 0.530146] scsi2 : pata_via [ 0.531005] scsi3 : pata_via [ 0.532574] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.532578] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.549210] Floppy drive(s): fd0 is 1.44M [ 0.563602] FDC 0 is a post-1991 82077 [ 0.729663] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.729711] ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300) [ 0.749964] ata3.00: HPA unlocked: 160834367 -> 160836480, native 160836480 [ 0.749968] ata3.00: ATA-7: Hitachi HDS721680PLAT80, P21OA60A, max UDMA/133 [ 0.749970] ata3.00: 160836480 sectors, multi 16: LBA48 [ 0.799958] ata3.01: HPA unlocked: 160084415 -> 160086528, native 160086528 [ 0.799961] ata3.01: ATA-7: Maxtor 6Y080P0, YAR41BW0, max UDMA/133 [ 0.799963] ata3.01: 160086528 sectors, multi 16: LBA [ 0.840051] ata3.00: configured for UDMA/133 [ 0.880050] ata3.01: configured for UDMA/133 [ 0.880668] usb 1-1: configuration #1 chosen from 1 choice [ 0.885693] Initializing USB Mass Storage driver... [ 0.885798] scsi4 : SCSI emulation for USB Mass Storage devices [ 0.885868] usbcore: registered new interface driver usb-storage [ 0.885870] USB Mass Storage support registered. [ 0.885874] usb-storage: device found at 2 [ 0.885875] usb-storage: waiting for device to settle before scanning [ 0.962394] ata1.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133 [ 0.962397] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.054023] ata1.00: configured for UDMA/133 [ 1.054107] scsi 0:0:0:0: Direct-Access ATA ST380811AS 3.AA PQ: 0 ANSI: 5 [ 1.054230] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.054234] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.054279] sd 0:0:0:0: [sda] Write Protect is off [ 1.054281] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.054299] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.054400] sda: sda1 [ 1.102157] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.260008] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.270726] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72168 P21O PQ: 0 ANSI: 5 [ 1.270812] sd 2:0:0:0: [sdb] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB) [ 1.270816] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.270886] scsi 2:0:1:0: Direct-Access ATA Maxtor 6Y080P0 YAR4 PQ: 0 ANSI: 5 [ 1.270888] sd 2:0:0:0: [sdb] Write Protect is off [ 1.270890] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.270908] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.270970] sd 2:0:1:0: Attached scsi generic sg2 type 0 [ 1.271088] sd 2:0:1:0: [sdc] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB) [ 1.271111] sdb: [ 1.279001] sd 2:0:1:0: [sdc] Write Protect is off [ 1.279003] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.279005] sdb1 [ 1.279022] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.279113] sdc: sdc1 [ 1.300993] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.301071] sd 2:0:1:0: [sdc] Attached SCSI disk [ 1.320007] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 1.450400] ata4.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66 [ 1.490296] ata4.00: configured for UDMA/66 [ 1.492168] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI: 5 [ 1.495333] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.495336] Uniform CD-ROM driver Revision: 3.20 [ 1.495399] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.495437] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 1.497099] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.497134] alloc irq_desc for 17 on node -1 [ 1.497136] alloc kstat_irqs on node -1 [ 1.497141] via-rhine 0000:03:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.503470] eth0: VIA Rhine III at 0xfebffc00, 00:05:5d:68:94:5b, IRQ 17. [ 1.504061] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 1.504201] usb 2-2: configuration #1 chosen from 1 choice [ 1.516096] usbcore: registered new interface driver hiddev [ 1.531332] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4 [ 1.531404] generic-usb 0003:04F2:0111.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:10.0-2/input0 [ 1.569151] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/input/input5 [ 1.569264] generic-usb 0003:04F2:0111.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:10.0-2/input1 [ 1.569282] usbcore: registered new interface driver usbhid [ 1.569283] usbhid: v2.6:USB HID core driver [ 1.983898] EXT4-fs (loop0): mounted filesystem with ordered data mode [ 5.881455] usb-storage: device scan complete [ 5.881929] scsi 4:0:0:0: Direct-Access HP Photosmart C4400 1.00 PQ: 0 ANSI: 5 [ 5.882241] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 5.883538] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 22.352938] udev: starting version 151 [ 22.392795] agpgart: Detected VIA PT880 Ultra chipset [ 22.396230] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 22.398169] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.533165] lp: driver loaded but no devices found [ 22.533495] parport_pc 00:05: reported by Plug and Play ACPI [ 22.533591] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 22.610194] lp0: using parport0 (interrupt-driven). [ 22.825292] type=1505 audit(1283191908.906:2): operation="profile_load" pid=719 name="/sbin/dhclient3" [ 22.825776] type=1505 audit(1283191908.906:3): operation="profile_load" pid=719 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.826029] type=1505 audit(1283191908.906:4): operation="profile_load" pid=719 name="/usr/lib/connman/scripts/dhclient-script" [ 22.827066] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 22.843964] ppdev: user-space parallel port driver [ 22.844528] [drm] Initialized drm 1.1.0 20060810 [ 22.848233] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6C11 [ 22.848273] usbcore: registered new interface driver usblp [ 23.054519] [drm] radeon defaulting to kernel modesetting. [ 23.054522] [drm] radeon kernel modesetting enabled. [ 23.054570] alloc irq_desc for 16 on node -1 [ 23.054571] alloc kstat_irqs on node -1 [ 23.054577] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 23.057318] [drm] radeon: Initializing kernel modesetting. [ 23.057521] [drm] register mmio base: 0xFEAF0000 [ 23.057522] [drm] register mmio size: 65536 [ 23.058311] ATOM BIOS: 113 [ 23.058325] [drm] Clocks initialized ! [ 23.058363] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 23.058387] agpgart-via 0000:00:00.0: putting AGP V3 device into 4x mode [ 23.058476] radeon 0000:01:00.0: putting AGP V3 device into 4x mode [ 23.058987] [drm] Detected VRAM RAM=256M, BAR=256M [ 23.058990] [drm] RAM width 256bits DDR [ 23.060096] [TTM] Zone kernel: Available graphics memory: 1028754 kiB. [ 23.060111] [drm] radeon: 256M of VRAM memory ready [ 23.060113] [drm] radeon: 64M of GTT memory ready. [ 23.060162] [drm] radeon: irq initialized. [ 23.060165] [drm] GART: num cpu pages 16384, num gpu pages 16384 [ 23.060249] [drm] Loading RV670 Microcode [ 23.060252] platform radeon_cp.0: firmware: requesting radeon/RV670_pfp.bin [ 23.235307] platform radeon_cp.0: firmware: requesting radeon/RV670_me.bin [ 23.250884] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin [ 23.304252] [drm] ring test succeeded in 1 usecs [ 23.306682] [drm] radeon: ib pool ready. [ 23.306755] [drm] ib test succeeded in 0 usecs [ 23.306758] [drm] Enabling audio support [ 23.306954] [drm] Default TV standard: PAL [ 23.307202] [drm] Radeon Display Connectors [ 23.307203] [drm] Connector 0: [ 23.307205] [drm] DVI-I [ 23.307206] [drm] HPD1 [ 23.307207] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 23.307208] [drm] Encoders: [ 23.307210] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 23.307211] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 23.307212] [drm] Connector 1: [ 23.307213] [drm] DIN [ 23.307214] [drm] Encoders: [ 23.307215] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 23.307216] [drm] Connector 2: [ 23.307217] [drm] DVI-I [ 23.307218] [drm] HPD2 [ 23.307219] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 23.307220] [drm] Encoders: [ 23.307222] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 23.307223] [drm] DFP2: INTERNAL_LVTM1 [ 23.441751] alloc irq_desc for 19 on node -1 [ 23.441755] alloc kstat_irqs on node -1 [ 23.441761] C-Media PCI 0000:03:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 23.530029] [drm] fb mappable at 0xD0061000 [ 23.530032] [drm] vram apper at 0xD0000000 [ 23.530033] [drm] size 8294400 [ 23.530034] [drm] fb depth is 24 [ 23.530035] [drm] pitch is 7680 [ 23.530226] fb0: radeondrmfb frame buffer device [ 23.530227] registered panic notifier [ 23.530233] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 23.567841] vga16fb: initializing [ 23.567845] vga16fb: mapped to 0xffff8800000a0000 [ 23.567848] vga16fb: not registering due to another framebuffer present [ 23.710163] Console: switching to colour frame buffer device 240x67 [ 24.100182] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k [ 24.294197] type=1505 audit(1283191910.376:5): operation="profile_load" pid=927 name="/usr/share/gdm/guest-session/Xsession" [ 24.295398] type=1505 audit(1283191910.376:6): operation="profile_replace" pid=928 name="/sbin/dhclient3" [ 24.295876] type=1505 audit(1283191910.376:7): operation="profile_replace" pid=928 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 24.296136] type=1505 audit(1283191910.376:8): operation="profile_replace" pid=928 name="/usr/lib/connman/scripts/dhclient-script" [ 24.298695] type=1505 audit(1283191910.376:9): operation="profile_load" pid=929 name="/usr/bin/evince" [ 24.305171] type=1505 audit(1283191910.386:10): operation="profile_load" pid=929 name="/usr/bin/evince-previewer" [ 24.308844] type=1505 audit(1283191910.386:11): operation="profile_load" pid=929 name="/usr/bin/evince-thumbnailer" [ 24.395292] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 26.900044] end_request: I/O error, dev fd0, sector 0 [ 26.940042] end_request: I/O error, dev fd0, sector 0 [ 30.485261] usb 1-1: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 35.381258] eth0: no IPv6 routers present [ 194.236281] radeon 0000:01:00.0: ffff880005a92e00 reserve failed for wait [ 2140.400057] usb 1-7: new high speed USB device using ehci_hcd and address 4 [ 2140.566701] usb 1-7: configuration #1 chosen from 3 choices [ 3834.639997] usb 1-7: USB disconnect, address 4 [ 4218.913101] usb 1-7: new high speed USB device using ehci_hcd and address 5 [ 4219.066004] usb 1-7: configuration #1 chosen from 3 choices [ 4471.333821] usb 1-7: USB disconnect, address 5 [ 4636.695219] usb 1-8: new high speed USB device using ehci_hcd and address 6 [ 4636.846715] usb 1-8: configuration #1 chosen from 3 choices [ 5488.964389] __ratelimit: 18 callbacks suppressed [ 5488.964393] debconf-communi[4133]: segfault at 7ff184fad08a ip 00007ff149634390 sp 00007fff475dec98 error 4 in ld-2.11.1.so[7ff14961c000+20000]