[ 0.000000] microcode: microcode updated early to revision 0x22, date = 2017-01-27 [ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0 [ 0.000000] Linux version 4.13.0-16-generic (buildd@lcy01-02) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu2)) #19-Ubuntu SMP Wed Oct 11 18:35:14 UTC 2017 (Ubuntu 4.13.0-16.19-generic 4.13.4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic root=UUID=c0d97617-382c-40c5-a56c-c5a6d4b80f58 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d1b5ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d1b60000-0x00000000d1b66fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d1b67000-0x00000000d1f97fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d1f98000-0x00000000d2417fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d2418000-0x00000000d7eeafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7eeb000-0x00000000d7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d8760fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d8761000-0x00000000d87fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8fb0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d8fb1000-0x00000000d8ffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da800000-0x00000000dbe13fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dbe14000-0x00000000dbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A03 09/17/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable [ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 8126M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdbe14 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd940-0x000fd94f] mapped at [ffff8ebc400fd940] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff8ebc40098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0xa0923000, 0xa0923fff] PGTABLE [ 0.000000] BRK [0xa0924000, 0xa0924fff] PGTABLE [ 0.000000] BRK [0xa0925000, 0xa0925fff] PGTABLE [ 0.000000] BRK [0xa0926000, 0xa0926fff] PGTABLE [ 0.000000] BRK [0xa0927000, 0xa0927fff] PGTABLE [ 0.000000] BRK [0xa0928000, 0xa0928fff] PGTABLE [ 0.000000] BRK [0xa0929000, 0xa0929fff] PGTABLE [ 0.000000] BRK [0xa092a000, 0xa092afff] PGTABLE [ 0.000000] BRK [0xa092b000, 0xa092bfff] PGTABLE [ 0.000000] BRK [0xa092c000, 0xa092cfff] PGTABLE [ 0.000000] BRK [0xa092d000, 0xa092dfff] PGTABLE [ 0.000000] BRK [0xa092e000, 0xa092efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31ef3000-0x34f70fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000D8FEE088 000094 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000D8FF94B0 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000D8FEE1B0 00B2FD (v02 DELL CBX3 00000014 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000DA7FE080 000040 [ 0.000000] ACPI: APIC 0x00000000D8FF95C0 000092 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000D8FF9658 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: SLIC 0x00000000D8FF96A0 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: LPIT 0x00000000D8FF9818 00005C (v01 DELL CBX3 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000D8FF9878 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000D8FF9DB8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000D8FFA890 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711) [ 0.000000] ACPI: HPET 0x00000000D8FFAA58 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000D8FFAA90 000495 (v01 IdeRef IdeTable 00001000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000D8FFAF28 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000D8FFAF68 003406 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: ASF! 0x00000000D8FFE370 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: DMAR 0x00000000D8FFE418 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21edd3000-0x21edfdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021edfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d1b5ffff] [ 0.000000] node 0: [mem 0x00000000d1b67000-0x00000000d1f97fff] [ 0.000000] node 0: [mem 0x00000000d2418000-0x00000000d7eeafff] [ 0.000000] node 0: [mem 0x00000000d8000000-0x00000000d8760fff] [ 0.000000] node 0: [mem 0x00000000d8800000-0x00000000d8fb0fff] [ 0.000000] node 0: [mem 0x00000000d9000000-0x00000000da71bfff] [ 0.000000] node 0: [mem 0x00000000da800000-0x00000000dbe13fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021edfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021edfffff] [ 0.000000] On node 0 totalpages: 2073667 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13979 pages used for memmap [ 0.000000] DMA32 zone: 894630 pages, LIFO batch:31 [ 0.000000] Normal zone: 18360 pages used for memmap [ 0.000000] Normal zone: 1175040 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd1b60000-0xd1b66fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd1f98000-0xd2417fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd7eeb000-0xd7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd8761000-0xd87fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd8fb1000-0xd8ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xda71c000-0xda7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbe14000-0xdbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff8ebe5ea00000 s119704 r8192 d31848 u262144 [ 0.000000] pcpu-alloc: s119704 r8192 d31848 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2041243 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic root=UUID=c0d97617-382c-40c5-a56c-c5a6d4b80f58 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8024720K/8294668K available (9281K kernel code, 2477K rwdata, 3992K rodata, 2324K init, 2384K bss, 269948K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 37719 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3392.377 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.75 BogoMIPS (lpj=13569508) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.010863] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.010880] Security Framework initialized [ 0.010881] Yama: becoming mindful. [ 0.010893] AppArmor: AppArmor initialized [ 0.011959] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.012508] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012532] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.012549] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.012681] CPU: Physical Processor ID: 0 [ 0.012681] CPU: Processor Core ID: 0 [ 0.012684] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.012685] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.012688] mce: CPU supports 9 MCE banks [ 0.012694] CPU0: Thermal monitoring enabled (TM1) [ 0.012703] process: using mwait in idle threads [ 0.012705] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.012705] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.013030] Freeing SMP alternatives memory: 36K [ 0.013825] smpboot: Max logical packages: 2 [ 0.013829] DMAR: Host address width 39 [ 0.013830] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.013836] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.013836] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.013838] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.013839] DMAR: RMRR base: 0x000000dbf7e000 end: 0x000000dbf8bfff [ 0.013840] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff [ 0.013841] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.013842] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.013842] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.014073] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.014074] x2apic enabled [ 0.014078] Switched APIC routing to cluster x2apic. [ 0.014476] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.054172] TSC deadline timer enabled [ 0.054175] smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.054216] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.054238] ... version: 3 [ 0.054238] ... bit width: 48 [ 0.054238] ... generic registers: 4 [ 0.054239] ... value mask: 0000ffffffffffff [ 0.054239] ... max period: 00007fffffffffff [ 0.054239] ... fixed-purpose events: 3 [ 0.054240] ... event mask: 000000070000000f [ 0.054261] Hierarchical SRCU implementation. [ 0.054793] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.054804] smp: Bringing up secondary CPUs ... [ 0.054847] x86: Booting SMP configuration: [ 0.054848] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.061003] smp: Brought up 1 node, 8 CPUs [ 0.061003] smpboot: Total of 8 processors activated (54278.03 BogoMIPS) [ 0.064233] devtmpfs: initialized [ 0.064233] x86/mm: Memory block size: 128MB [ 0.064395] evm: security.selinux [ 0.064395] evm: security.SMACK64 [ 0.064395] evm: security.SMACK64EXEC [ 0.064395] evm: security.SMACK64TRANSMUTE [ 0.064396] evm: security.SMACK64MMAP [ 0.064396] evm: security.ima [ 0.064396] evm: security.capability [ 0.064405] PM: Registering ACPI NVS region [mem 0xd1b60000-0xd1b66fff] (28672 bytes) [ 0.064405] PM: Registering ACPI NVS region [mem 0xda71c000-0xda7fffff] (933888 bytes) [ 0.064405] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.064405] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.064405] pinctrl core: initialized pinctrl subsystem [ 0.064405] RTC time: 14:04:27, date: 10/27/17 [ 0.064405] NET: Registered protocol family 16 [ 0.064405] cpuidle: using governor ladder [ 0.064405] cpuidle: using governor menu [ 0.064405] PCCT header not found. [ 0.064405] ACPI: bus type PCI registered [ 0.064405] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.064405] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.064405] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.064405] PCI: Using configuration type 1 for base access [ 0.064405] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.064692] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.064692] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.064693] ACPI: Added _OSI(Module Device) [ 0.064693] ACPI: Added _OSI(Processor Device) [ 0.064693] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064693] ACPI: Added _OSI(Processor Aggregator Device) [ 0.064693] ACPI: Executed 1 blocks of module-level executable AML code [ 0.068817] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.069086] ACPI: Dynamic OEM Table Load: [ 0.069086] ACPI: SSDT 0xFFFF8EBE54B21C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.069086] ACPI: Dynamic OEM Table Load: [ 0.069086] ACPI: SSDT 0xFFFF8EBE54810000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.069086] ACPI: Dynamic OEM Table Load: [ 0.069086] ACPI: SSDT 0xFFFF8EBE54B1F600 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.069086] ACPI: Interpreter enabled [ 0.069086] ACPI: (supports S0 S3 S4 S5) [ 0.069086] ACPI: Using IOAPIC for interrupt routing [ 0.069086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.069122] ACPI: GPE 0x1E active on init [ 0.069126] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.077524] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.077527] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.077874] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.078109] PCI host bridge to bus 0000:00 [ 0.078111] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.078111] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.078112] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.078113] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.078113] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.078114] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.078114] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.078115] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.078116] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.078116] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.078121] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.078175] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.078182] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.078186] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.078188] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.078234] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.078240] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit] [ 0.078309] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.078326] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.078374] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.078417] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.078435] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3f000-0xf7c3f00f 64bit] [ 0.078486] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.078527] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.078542] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.078548] pci 0000:00:16.3: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff] [ 0.078639] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.078654] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.078660] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3c000-0xf7c3cfff] [ 0.078667] pci 0000:00:19.0: reg 0x18: [io 0xf060-0xf07f] [ 0.078713] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.078757] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.078774] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff] [ 0.078844] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.078889] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.078905] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.078961] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.079007] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.079062] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.079129] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.079186] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.079255] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.079273] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3a000-0xf7c3a3ff] [ 0.079343] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.079389] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100 [ 0.079517] pci 0000:00:1f.2: [8086:8c00] type 00 class 0x01018f [ 0.079530] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.079535] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.079541] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.079547] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.079552] pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f] [ 0.079558] pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f] [ 0.079612] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.079627] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit] [ 0.079643] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.079733] acpiphp: Slot [1] registered [ 0.079738] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.079802] pci 0000:02:00.0: [104c:8240] type 01 class 0x060400 [ 0.079930] pci 0000:02:00.0: supports D1 D2 [ 0.096016] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.096143] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.096619] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.096651] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.096681] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.096711] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.096741] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.096771] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.096801] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.096831] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.097072] SCSI subsystem initialized [ 0.097083] libata version 3.00 loaded. [ 0.097083] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.097083] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.097083] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.097083] vgaarb: loaded [ 0.097083] ACPI: bus type USB registered [ 0.097083] usbcore: registered new interface driver usbfs [ 0.097083] usbcore: registered new interface driver hub [ 0.097083] usbcore: registered new device driver usb [ 0.097083] EDAC MC: Ver: 3.0.0 [ 0.097083] PCI: Using ACPI for IRQ routing [ 0.097208] PCI: pci_cache_line_size set to 64 bytes [ 0.097245] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.097246] e820: reserve RAM buffer [mem 0xd1b60000-0xd3ffffff] [ 0.097246] e820: reserve RAM buffer [mem 0xd1f98000-0xd3ffffff] [ 0.097247] e820: reserve RAM buffer [mem 0xd7eeb000-0xd7ffffff] [ 0.097247] e820: reserve RAM buffer [mem 0xd8761000-0xdbffffff] [ 0.097248] e820: reserve RAM buffer [mem 0xd8fb1000-0xdbffffff] [ 0.097249] e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff] [ 0.097249] e820: reserve RAM buffer [mem 0xdbe14000-0xdbffffff] [ 0.097250] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff] [ 0.097298] NetLabel: Initializing [ 0.097299] NetLabel: domain hash size = 128 [ 0.097299] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.097308] NetLabel: unlabeled traffic allowed by default [ 0.097316] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.097316] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.100012] clocksource: Switched to clocksource hpet [ 0.106347] VFS: Disk quotas dquot_6.6.0 [ 0.106360] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.106425] AppArmor: AppArmor Filesystem Enabled [ 0.106454] pnp: PnP ACPI init [ 0.106515] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.106518] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.106620] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.106621] system 00:01: [io 0xffff] has been reserved [ 0.106622] system 00:01: [io 0xffff] has been reserved [ 0.106623] system 00:01: [io 0xffff] has been reserved [ 0.106623] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.106624] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.106625] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.106625] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.106626] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.106627] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.106628] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.106640] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.106666] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.106668] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.106720] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.106721] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.106746] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.106747] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107053] pnp 00:06: [dma 0 disabled] [ 0.107076] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.107309] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.107310] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.107310] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.107311] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.107312] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.107312] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.107313] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.107314] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.107315] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.107316] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.107316] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.107317] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.107318] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107443] pnp: PnP ACPI: found 8 devices [ 0.112988] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.113014] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.113023] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.113038] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.113046] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.113047] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.113048] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.113048] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.113049] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.113050] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window] [ 0.113050] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window] [ 0.113051] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window] [ 0.113051] pci_bus 0000:00: resource 12 [mem 0xdf200000-0xfeafffff window] [ 0.113114] NET: Registered protocol family 2 [ 0.113218] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.113293] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.113399] TCP: Hash tables configured (established 65536 bind 65536) [ 0.113419] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.113437] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.113471] NET: Registered protocol family 1 [ 0.113479] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.164082] PCI: CLS 64 bytes, default 64 [ 0.164106] Unpacking initramfs... [ 0.627912] Freeing initrd memory: 49656K [ 0.627959] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.627961] software IO TLB [mem 0xd3eeb000-0xd7eeb000] (64MB) mapped at [ffff8ebd13eeb000-ffff8ebd17eeafff] [ 0.628236] Scanning for low memory corruption every 60 seconds [ 0.628430] audit: initializing netlink subsys (disabled) [ 0.628463] audit: type=2000 audit(1509113067.628:1): state=initialized audit_enabled=0 res=1 [ 0.628682] Initialise system trusted keyrings [ 0.628688] Key type blacklist registered [ 0.628715] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.629359] zbud: loaded [ 0.629573] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.629654] fuse init (API version 7.26) [ 0.630631] Key type asymmetric registered [ 0.630632] Asymmetric key parser 'x509' registered [ 0.630651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.630675] io scheduler noop registered [ 0.630675] io scheduler deadline registered [ 0.630690] io scheduler cfq registered (default) [ 0.631043] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 [ 0.631059] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 [ 0.631097] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.631098] vesafb: scrolling: redraw [ 0.631099] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.631105] vesafb: framebuffer at 0xe0000000, mapped to 0xffffaec441800000, using 8128k, total 8128k [ 0.631165] Console: switching to colour frame buffer device 240x67 [ 0.631181] fb0: VESA VGA frame buffer device [ 0.631188] intel_idle: MWAIT substates: 0x42120 [ 0.631188] intel_idle: v0.4.1 model 0x3C [ 0.631378] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.631442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.631462] ACPI: Power Button [PWRB] [ 0.631481] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.631496] ACPI: Power Button [PWRF] [ 0.631696] ACPI: Invalid active0 threshold [ 0.631725] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.631745] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.631746] ACPI: Thermal Zone [TZ00] (28 C) [ 0.631873] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.631873] ACPI: Thermal Zone [TZ01] (30 C) [ 0.631898] GHES: HEST is not enabled! [ 0.631951] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.652621] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.673760] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.674019] Linux agpgart interface v0.103 [ 0.675309] loop: module loaded [ 0.675364] ata_piix 0000:00:1f.2: version 2.13 [ 0.675411] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.832488] scsi host0: ata_piix [ 0.832660] scsi host1: ata_piix [ 0.832688] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19 [ 0.832692] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19 [ 0.832743] libphy: Fixed MDIO Bus: probed [ 0.832743] tun: Universal TUN/TAP device driver, 1.6 [ 0.832803] PPP generic driver version 2.4.2 [ 0.832855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.832858] ehci-pci: EHCI PCI platform driver [ 0.832948] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.832952] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.832962] ehci-pci 0000:00:1a.0: debug port 2 [ 0.836863] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.836873] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3b000 [ 0.852046] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.852072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.852072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.852073] usb usb1: Product: EHCI Host Controller [ 0.852074] usb usb1: Manufacturer: Linux 4.13.0-16-generic ehci_hcd [ 0.852074] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.852162] hub 1-0:1.0: USB hub found [ 0.852164] hub 1-0:1.0: 3 ports detected [ 0.852306] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.852309] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.852317] ehci-pci 0000:00:1d.0: debug port 2 [ 0.856210] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.856219] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3a000 [ 0.872044] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.872066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.872066] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.872067] usb usb2: Product: EHCI Host Controller [ 0.872068] usb usb2: Manufacturer: Linux 4.13.0-16-generic ehci_hcd [ 0.872068] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.872142] hub 2-0:1.0: USB hub found [ 0.872144] hub 2-0:1.0: 3 ports detected [ 0.872218] ehci-platform: EHCI generic platform driver [ 0.872223] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.872224] ohci-pci: OHCI PCI platform driver [ 0.872229] ohci-platform: OHCI generic platform driver [ 0.872232] uhci_hcd: USB Universal Host Controller Interface driver [ 0.872303] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.872305] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.873373] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.873377] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.873435] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.873436] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.873436] usb usb3: Product: xHCI Host Controller [ 0.873437] usb usb3: Manufacturer: Linux 4.13.0-16-generic xhci-hcd [ 0.873438] usb usb3: SerialNumber: 0000:00:14.0 [ 0.873521] hub 3-0:1.0: USB hub found [ 0.873535] hub 3-0:1.0: 15 ports detected [ 0.874882] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.874884] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.874906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.874907] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.874907] usb usb4: Product: xHCI Host Controller [ 0.874908] usb usb4: Manufacturer: Linux 4.13.0-16-generic xhci-hcd [ 0.874908] usb usb4: SerialNumber: 0000:00:14.0 [ 0.874973] hub 4-0:1.0: USB hub found [ 0.874983] hub 4-0:1.0: 6 ports detected [ 0.875269] i8042: PNP: No PS/2 controller found. [ 0.875338] mousedev: PS/2 mouse device common for all mice [ 0.875473] rtc_cmos 00:02: RTC can wake from S4 [ 0.875606] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.875629] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.875632] i2c /dev entries driver [ 0.875660] device-mapper: uevent: version 1.0.3 [ 0.875699] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com [ 0.875702] intel_pstate: Intel P-state driver initializing [ 0.876163] ledtrig-cpu: registered to indicate activity on CPUs [ 0.876566] NET: Registered protocol family 10 [ 0.879011] Segment Routing with IPv6 [ 0.879022] NET: Registered protocol family 17 [ 0.879027] Key type dns_resolver registered [ 0.879330] RAS: Correctable Errors collector initialized. [ 0.879344] microcode: sig=0x306c3, pf=0x2, revision=0x22 [ 0.879422] microcode: Microcode Update Driver: v2.2. [ 0.879430] sched_clock: Marking stable (879418458, 0)->(880328174, -909716) [ 0.879584] registered taskstats version 1 [ 0.879589] Loading compiled-in X.509 certificates [ 0.880998] Loaded X.509 cert 'Build time autogenerated kernel key: 04409fd30ffab3ce9d2178c508b3c866d61d9a62' [ 0.881010] zswap: loaded using pool lzo/zbud [ 0.881913] Key type big_key registered [ 0.881914] Key type trusted registered [ 0.882698] Key type encrypted registered [ 0.882700] AppArmor: AppArmor sha1 policy hashing enabled [ 0.882701] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.882711] evm: HMAC attrs: 0x1 [ 0.882897] Magic number: 5:53:82 [ 0.882913] event_source uncore_cbox_0: hash matches [ 0.882987] rtc_cmos 00:02: setting system clock to 2017-10-27 14:04:28 UTC (1509113068) [ 0.883014] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.883014] EDD information not available. [ 0.883043] PM: Hibernation image not present or could not be loaded. [ 1.180045] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.200041] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.328434] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.328435] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.328688] hub 1-1:1.0: USB hub found [ 1.328758] hub 1-1:1.0: 6 ports detected [ 1.348382] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.348383] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.348685] hub 2-1:1.0: USB hub found [ 1.348791] hub 2-1:1.0: 8 ports detected [ 1.616014] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 1.620072] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.620083] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.625162] ata1.00: ATA-8: TOSHIBA DT01ACA050, MS1OA7S0, max UDMA/133 [ 1.625163] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.625166] ata1.01: ATAPI: HL-DT-ST DVD+/-RW GHB0N, A100, max UDMA/100 [ 1.628178] ata1.00: configured for UDMA/133 [ 1.636009] usb 2-1.3: new low-speed USB device number 3 using ehci-pci [ 1.650502] ata1.01: configured for UDMA/100 [ 1.652287] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 A7S0 PQ: 0 ANSI: 5 [ 1.652693] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.652785] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.652786] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.652815] sd 0:0:0:0: [sda] Write Protect is off [ 1.652816] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.656183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.656184] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD+-RW GHB0N A100 PQ: 0 ANSI: 5 [ 1.660010] tsc: Refined TSC clocksource calibration: 3392.145 MHz [ 1.660017] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e55212bb0, max_idle_ns: 440795241820 ns [ 1.685041] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.685042] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.685171] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.685241] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.751290] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c508 [ 1.751292] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.751293] usb 2-1.3: Product: USB Receiver [ 1.751293] usb 2-1.3: Manufacturer: Logitech [ 1.755969] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.756773] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.832008] usb 2-1.4: new high-speed USB device number 4 using ehci-pci [ 1.876009] ata2.00: failed to resume link (SControl 0) [ 1.941816] usb 2-1.4: New USB device found, idVendor=05e3, idProduct=0606 [ 1.941818] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.941819] usb 2-1.4: Product: USB2.0 Hub [ 1.942349] hub 2-1.4:1.0: USB hub found [ 1.942681] hub 2-1.4:1.0: 4 ports detected [ 2.024005] usb 2-1.5: new high-speed USB device number 5 using ehci-pci [ 2.232005] usb 2-1.4.4: new high-speed USB device number 6 using ehci-pci [ 2.340911] usb 1-1.1: New USB device found, idVendor=046d, idProduct=0a1f [ 2.340912] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.340913] usb 1-1.1: Product: Logitech G930 Headset [ 2.340914] usb 1-1.1: Manufacturer: Logitech [ 2.341760] usb 2-1.4.4: New USB device found, idVendor=154b, idProduct=002d [ 2.341762] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.341762] usb 2-1.4.4: Product: Geek Squad [ 2.341763] usb 2-1.4.4: Manufacturer: Geek Squad [ 2.341764] usb 2-1.4.4: SerialNumber: AAA7164F00003561 [ 2.348448] usb 2-1.5: New USB device found, idVendor=046d, idProduct=0825 [ 2.348450] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 2.348451] usb 2-1.5: SerialNumber: C2E2A350 [ 2.420009] usb 1-1.2: new low-speed USB device number 4 using ehci-pci [ 2.533658] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c517 [ 2.533660] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.533661] usb 1-1.2: Product: USB Receiver [ 2.533661] usb 1-1.2: Manufacturer: Logitech [ 2.684132] clocksource: Switched to clocksource tsc [ 2.768276] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.793725] usb 4-1: New USB device found, idVendor=090c, idProduct=1000 [ 2.793726] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.793727] usb 4-1: Product: Flash Drive [ 2.793728] usb 4-1: Manufacturer: Samsung [ 2.793729] usb 4-1: SerialNumber: 0376616040008365 [ 2.916010] ata2.01: failed to resume link (SControl 0) [ 2.927309] ata2.00: SATA link down (SStatus 4 SControl 0) [ 2.927321] ata2.01: SATA link down (SStatus 4 SControl 0) [ 2.928692] Freeing unused kernel memory: 2324K [ 2.928692] Write protecting the kernel read-only data: 14336k [ 2.928922] Freeing unused kernel memory: 948K [ 2.929066] Freeing unused kernel memory: 104K [ 2.930043] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.967896] pps_core: LinuxPPS API ver. 1 registered [ 2.967897] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.969143] PTP clock support registered [ 2.969391] usb-storage 2-1.4.4:1.0: USB Mass Storage device detected [ 2.969454] scsi host2: usb-storage 2-1.4.4:1.0 [ 2.969515] usb-storage 4-1:1.0: USB Mass Storage device detected [ 2.969555] scsi host3: usb-storage 4-1:1.0 [ 2.969556] hidraw: raw HID events driver (C) Jiri Kosina [ 2.969586] usbcore: registered new interface driver usb-storage [ 2.970285] usbcore: registered new interface driver uas [ 2.971486] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.971486] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.971613] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.984019] usbcore: registered new interface driver usbhid [ 2.984021] usbhid: USB HID core driver [ 2.985342] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C508.0001/input/input2 [ 2.985393] hid-generic 0003:046D:C508.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0 [ 2.985488] input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.3/0003:046D:0A1F.0002/input/input3 [ 2.985874] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C517.0003/input/input4 [ 3.044192] hid-generic 0003:046D:0A1F.0002: input,hiddev0,hidraw1: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:00:1a.0-1.1/input3 [ 3.047464] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 3.104104] logitech 0003:046D:C517.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0 [ 3.104118] logitech 0003:046D:C517.0004: fixing up Logitech keyboard report descriptor [ 3.104469] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C517.0004/input/input5 [ 3.113375] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f8:b1:56:b2:0c:ec [ 3.113376] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.113423] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 3.113782] [drm] Memory usable by graphics device = 2048M [ 3.113784] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 3.113784] fb: switching to inteldrmfb from VESA VGA [ 3.113799] Console: switching to colour dummy device 80x25 [ 3.113869] [drm] Replacing VGA console driver [ 3.114267] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 3.119899] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.119900] [drm] Driver supports precise vblank timestamp query. [ 3.122675] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.125555] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 3.126535] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.126848] acpi device:62: registered as cooling_device8 [ 3.126891] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 3.164232] logitech 0003:046D:C517.0004: input,hiddev1,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1 [ 3.210421] fbcon: inteldrmfb (fb0) is primary device [ 3.210484] Console: switching to colour frame buffer device 240x67 [ 3.210502] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.928108] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 3.928109] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] [ 3.928111] PM: Marking nosave pages: [mem 0xd1b60000-0xd1b66fff] [ 3.928111] PM: Marking nosave pages: [mem 0xd1f98000-0xd2417fff] [ 3.928123] PM: Marking nosave pages: [mem 0xd7eeb000-0xd7ffffff] [ 3.928126] PM: Marking nosave pages: [mem 0xd8761000-0xd87fffff] [ 3.928128] PM: Marking nosave pages: [mem 0xd8fb1000-0xd8ffffff] [ 3.928129] PM: Marking nosave pages: [mem 0xda71c000-0xda7fffff] [ 3.928131] PM: Marking nosave pages: [mem 0xdbe14000-0xffffffff] [ 3.928448] PM: Basic memory bitmaps created [ 3.928828] PM: Basic memory bitmaps freed [ 3.929354] video LNXVIDEO:00: Restoring backlight state [ 3.996991] scsi 2:0:0:0: Direct-Access Geek Squad 1638 PQ: 0 ANSI: 0 CCS [ 3.997237] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.997888] sd 2:0:0:0: [sdb] 31588352 512-byte logical blocks: (16.2 GB/15.1 GiB) [ 3.998620] sd 2:0:0:0: [sdb] Write Protect is off [ 3.998621] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 3.999403] sd 2:0:0:0: [sdb] No Caching mode page found [ 3.999406] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 4.003153] sdb: sdb1 [ 4.005906] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 4.131839] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.421289] scsi 3:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6 [ 4.421554] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 4.422134] sd 3:0:0:0: [sdc] 250609664 512-byte logical blocks: (128 GB/120 GiB) [ 4.422654] sd 3:0:0:0: [sdc] Write Protect is off [ 4.422656] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 4.423175] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.426960] sdc: sdc1 [ 4.428533] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 4.865503] random: crng init done [ 5.503099] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.625160] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 5.625293] systemd[1]: Detected architecture x86-64. [ 5.638496] systemd[1]: Set hostname to . [ 7.239842] systemd[1]: Reached target User and Group Name Lookups. [ 7.239908] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.240009] systemd[1]: Created slice User and Session Slice. [ 7.240025] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.240030] systemd[1]: Reached target Remote File Systems. [ 7.240080] systemd[1]: Listening on Journal Audit Socket. [ 7.240103] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.817515] lp: driver loaded but no devices found [ 7.958263] ppdev: user-space parallel port driver [ 8.553568] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 8.758016] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.817871] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 10.868209] systemd-journald[302]: Received request to flush runtime journal from PID 1 [ 11.164526] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 11.164527] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 11.164528] RAPL PMU: hw unit of domain package 2^-14 Joules [ 11.164528] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 11.164529] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 11.565582] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170531/utaddress-247) [ 11.565587] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.565590] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247) [ 11.565593] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.565593] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247) [ 11.565596] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247) [ 11.565598] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.565599] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247) [ 11.565601] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247) [ 11.565604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.565604] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 11.866483] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.557943] AVX2 version of gcm_enc/dec engaged. [ 12.557943] AES CTR mode by8 optimization enabled [ 14.369591] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 14.630865] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 14.630866] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 14.630867] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 14.630867] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 14.630868] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 14.630869] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x1a [ 14.630870] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 14.637985] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7 [ 14.638017] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8 [ 14.638042] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 14.638067] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 14.659458] intel_rapl: Found RAPL domain package [ 14.659459] intel_rapl: Found RAPL domain core [ 14.659460] intel_rapl: Found RAPL domain uncore [ 14.659461] intel_rapl: Found RAPL domain dram [ 14.659463] intel_rapl: RAPL package 0 domain package locked by BIOS [ 14.659466] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 14.677153] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 14.677185] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 14.677212] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 14.677257] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 14.688919] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 14.738490] media: Linux media interface: v0.10 [ 14.759128] Linux video capture interface: v2.00 [ 15.629018] intel-spi intel-spi: n25q064 (8192 Kbytes) [ 15.696442] Creating 1 MTD partitions on "intel-spi": [ 15.696444] 0x000000000000-0x000000c00000 : "BIOS" [ 15.696445] mtd: partition "BIOS" extends beyond the end of device "intel-spi" -- size truncated to 0x800000 [ 15.716471] audit: type=1400 audit(1509113083.333:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=846 comm="apparmor_parser" [ 15.716473] audit: type=1400 audit(1509113083.333:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=845 comm="apparmor_parser" [ 15.720204] audit: type=1400 audit(1509113083.337:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=849 comm="apparmor_parser" [ 15.744891] audit: type=1400 audit(1509113083.361:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=857 comm="apparmor_parser" [ 15.744893] audit: type=1400 audit(1509113083.361:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=858 comm="apparmor_parser" [ 15.794862] audit: type=1400 audit(1509113083.411:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=860 comm="apparmor_parser" [ 15.794918] audit: type=1400 audit(1509113083.411:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=861 comm="apparmor_parser" [ 15.806676] audit: type=1400 audit(1509113083.423:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=863 comm="apparmor_parser" [ 15.923258] usb 2-1.5: set resolution quirk: cval->res = 384 [ 15.923363] usbcore: registered new interface driver snd-usb-audio [ 15.923374] uvcvideo: Found UVC 1.00 device (046d:0825) [ 15.937162] uvcvideo 2-1.5:1.0: Entity type for entity Extension 4 was not initialized! [ 15.937163] uvcvideo 2-1.5:1.0: Entity type for entity Extension 6 was not initialized! [ 15.937164] uvcvideo 2-1.5:1.0: Entity type for entity Extension 7 was not initialized! [ 15.937165] uvcvideo 2-1.5:1.0: Entity type for entity Processing 2 was not initialized! [ 15.937165] uvcvideo 2-1.5:1.0: Entity type for entity Extension 3 was not initialized! [ 15.937166] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized! [ 15.937215] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input15 [ 15.937258] usbcore: registered new interface driver uvcvideo [ 15.937259] USB Video Class driver (1.1.1) [ 15.967303] audit: type=1400 audit(1509113083.584:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=852 comm="apparmor_parser" [ 15.986687] audit: type=1400 audit(1509113083.603:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=880 comm="apparmor_parser" [ 18.236459] Adding 8292348k swap on /dev/sda6. Priority:-1 extents:1 across:8292348k FS [ 31.366052] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 31.552222] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 33.119450] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 33.119453] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO [ 33.119486] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 35.036237] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=192.168.2.24 DST=224.0.0.252 LEN=68 TOS=0x00 PREC=0x00 TTL=255 ID=58820 PROTO=UDP SPT=5355 DPT=5355 LEN=48 [ 35.162099] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=88 TC=0 HOPLIMIT=255 FLOWLBL=852443 PROTO=UDP SPT=5355 DPT=5355 LEN=48 [ 35.162137] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=192.168.2.24 DST=224.0.0.252 LEN=68 TOS=0x00 PREC=0x00 TTL=255 ID=58821 PROTO=UDP SPT=5355 DPT=5355 LEN=48 [ 35.505306] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=192.168.2.24 DST=224.0.0.252 LEN=68 TOS=0x00 PREC=0x00 TTL=255 ID=58834 PROTO=UDP SPT=5355 DPT=5355 LEN=48 [ 35.505347] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=88 TC=0 HOPLIMIT=255 FLOWLBL=852443 PROTO=UDP SPT=5355 DPT=5355 LEN=48 [ 35.540639] vboxdrv: loading out-of-tree module taints kernel. [ 35.540802] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 35.544545] vboxdrv: Found 8 processor cores [ 35.564297] vboxdrv: TSC mode is Invariant, tentative frequency 3392143110 Hz [ 35.564298] vboxdrv: Successfully loaded version 5.1.30_Ubuntu (interface 0x002a0000) [ 35.642142] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=88 TC=0 HOPLIMIT=255 FLOWLBL=852443 PROTO=UDP SPT=5355 DPT=5355 LEN=48 [ 36.106640] VBoxNetFlt: Successfully started. [ 36.345190] VBoxNetAdp: Successfully started. [ 36.460504] VBoxPciLinuxInit [ 36.482086] vboxpci: IOMMU not found (not registered) [ 36.574500] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=192.168.2.24 DST=224.0.0.252 LEN=51 TOS=0x00 PREC=0x00 TTL=255 ID=58919 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 36.574563] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=71 TC=0 HOPLIMIT=255 FLOWLBL=852443 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 36.924570] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=192.168.2.24 DST=224.0.0.252 LEN=51 TOS=0x00 PREC=0x00 TTL=255 ID=58933 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 36.924633] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=71 TC=0 HOPLIMIT=255 FLOWLBL=852443 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 37.247659] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=71 TC=0 HOPLIMIT=255 FLOWLBL=852443 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 37.247696] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=192.168.2.24 DST=224.0.0.252 LEN=51 TOS=0x00 PREC=0x00 TTL=255 ID=58945 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 41.556945] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=71 TC=0 HOPLIMIT=255 FLOWLBL=852443 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 41.556998] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=192.168.2.24 DST=224.0.0.252 LEN=51 TOS=0x00 PREC=0x00 TTL=255 ID=59005 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 41.907050] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=71 TC=0 HOPLIMIT=255 FLOWLBL=852443 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 41.907124] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=192.168.2.24 DST=224.0.0.252 LEN=51 TOS=0x00 PREC=0x00 TTL=255 ID=59087 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 42.217900] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=71 TC=0 HOPLIMIT=255 FLOWLBL=852443 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 42.217962] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=192.168.2.24 DST=224.0.0.252 LEN=51 TOS=0x00 PREC=0x00 TTL=255 ID=59090 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 42.984005] usb 2-1.5: reset high-speed USB device number 5 using ehci-pci [ 46.623387] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=192.168.2.24 DST=224.0.0.252 LEN=51 TOS=0x00 PREC=0x00 TTL=255 ID=59128 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 46.623437] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=71 TC=0 HOPLIMIT=255 FLOWLBL=852443 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [ 71.416084] rfkill: input handler disabled [ 71.900932] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 71.901758] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 81.209291] usb 2-1.4.1: new high-speed USB device number 7 using ehci-pci [ 81.318056] usb 2-1.4.1: New USB device found, idVendor=03f0, idProduct=c211 [ 81.318059] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 81.318061] usb 2-1.4.1: Product: Deskjet 2540 series [ 81.318063] usb 2-1.4.1: Manufacturer: HP [ 81.318064] usb 2-1.4.1: SerialNumber: CN5616B4KY0604 [ 82.791835] [UFW BLOCK] IN=eno1 OUT= MAC=f8:b1:56:b2:0c:ec:00:16:f5:1e:32:1e:08:00 SRC=192.168.2.27 DST=192.168.2.24 LEN=288 TOS=0x00 PREC=0x00 TTL=64 ID=27789 DF PROTO=UDP SPT=2870 DPT=54743 LEN=268 [ 82.894466] [UFW BLOCK] IN=eno1 OUT= MAC=f8:b1:56:b2:0c:ec:00:16:f5:1e:32:1e:08:00 SRC=192.168.2.27 DST=192.168.2.24 LEN=288 TOS=0x00 PREC=0x00 TTL=64 ID=27790 DF PROTO=UDP SPT=2870 DPT=54743 LEN=268 [ 88.718346] usblp 2-1.4.1:1.1: usblp2: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC211 [ 88.718363] usbcore: registered new interface driver usblp [ 88.729812] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=983844 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 88.729820] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=876535 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 97.313636] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:24e7:df03:daf6:8926 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=983844 PROTO=UDP SPT=8612 DPT=8612 LEN=24