[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-11-server (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #48-Ubuntu SMP Fri Jul 29 19:20:32 UTC 2011 (Ubuntu 2.6.38-11.48-server 2.6.38.8) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-11-server root=/dev/mapper/EDMUBC-root ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Dell Inc. PowerEdge 1950/0DT097, BIOS 1.3.7 03/26/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask E00000000 write-back [ 0.000000] 5 base 400000000 mask FC0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcffa8 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cffa8000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cffa8000 page 4k [ 0.000000] kernel direct mapping tables up to cffa8000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000430000000 [ 0.000000] 0100000000 - 0430000000 page 2M [ 0.000000] kernel direct mapping tables up to 430000000 @ cff96000-cffa8000 [ 0.000000] RAMDISK: 359cc000 - 36cde000 [ 0.000000] ACPI: RSDP 00000000000f2620 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000f26a0 0004C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP 00000000000f27a8 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT 00000000cffa8000 03C53 (v01 DELL PE_SC3 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000cffb7c00 00040 [ 0.000000] ACPI: APIC 00000000000f289c 000C8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR 00000000000f297d 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET 00000000000f29cd 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG 00000000000f2a05 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000430000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000430000000 [ 0.000000] NODE_DATA [000000042fffb000 - 000000042fffffff] [ 0.000000] [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff88041fe00000-ffff88042dffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00430000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x000cffa8 [ 0.000000] 0: 0x00100000 -> 0x00430000 [ 0.000000] On node 0 totalpages: 4194104 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 7 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833504 pages, LIFO batch:31 [ 0.000000] Normal zone: 45696 pages used for memmap [ 0.000000] Normal zone: 3296640 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 104 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffb7000 [ 0.000000] PM: Registered nosave memory: 00000000cffb7000 - 00000000cffb8000 [ 0.000000] PM: Registered nosave memory: 00000000cffb8000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s84416 r8192 d22080 u262144 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4134065 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-11-server root=/dev/mapper/EDMUBC-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16444816k/17563648k available (6025k kernel code, 787232k absent, 331600k reserved, 5023k data, 880k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:1832 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 167772160 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3724.438 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 7448.87 BogoMIPS (lpj=37244380) [ 0.010012] pid_max: default: 32768 minimum: 301 [ 0.010041] Security Framework initialized [ 0.010063] AppArmor: AppArmor initialized [ 0.010065] Yama: becoming mindful. [ 0.013088] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.027822] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.031551] Mount-cache hash table entries: 256 [ 0.031762] Initializing cgroup subsys ns [ 0.031768] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.031772] Initializing cgroup subsys cpuacct [ 0.031777] Initializing cgroup subsys memory [ 0.031788] Initializing cgroup subsys devices [ 0.031791] Initializing cgroup subsys freezer [ 0.031793] Initializing cgroup subsys net_cls [ 0.031795] Initializing cgroup subsys blkio [ 0.031850] CPU: Physical Processor ID: 0 [ 0.031853] CPU: Processor Core ID: 0 [ 0.031855] mce: CPU supports 4 MCE banks [ 0.031868] CPU0: Thermal monitoring enabled (TM1) [ 0.031874] using mwait in idle threads. [ 0.034550] ACPI: Core revision 20110112 [ 0.036047] ftrace: allocating 24622 entries in 97 pages [ 0.040093] Setting APIC routing to flat [ 0.040481] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.149926] CPU0: Intel(R) Xeon(TM) CPU 3.73GHz stepping 04 [ 0.150000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.150000] ... version: 0 [ 0.150000] ... bit width: 40 [ 0.150000] ... generic registers: 18 [ 0.150000] ... value mask: 000000ffffffffff [ 0.150000] ... max period: 0000007fffffffff [ 0.150000] ... fixed-purpose events: 0 [ 0.150000] ... event mask: 000000000003ffff [ 0.150000] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. [ 1.330011] Brought up 8 CPUs [ 1.330016] Total of 8 processors activated (59586.82 BogoMIPS). [ 1.333509] devtmpfs: initialized [ 1.333509] print_constraints: dummy: [ 1.333509] Time: 20:25:06 Date: 08/06/11 [ 1.333509] NET: Registered protocol family 16 [ 1.333509] Trying to unpack rootfs image as initramfs... [ 1.333509] ACPI: bus type pci registered [ 1.333509] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.333509] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 1.384052] PCI: Using configuration type 1 for base access [ 1.386679] bio: create slab at 0 [ 1.386679] ACPI: EC: Look up EC in DSDT [ 1.386679] ACPI: Interpreter enabled [ 1.386679] ACPI: (supports S0 S4 S5) [ 1.386679] ACPI: Using IOAPIC for interrupt routing [ 1.396101] ACPI: No dock devices found. [ 1.396106] HEST: Table not found. [ 1.396111] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 1.396277] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.396599] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 1.396605] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 1.396609] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 1.396613] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfdffffff] (ignored) [ 1.396634] pci 0000:00:00.0: [8086:25c0] type 0 class 0x000600 [ 1.396688] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.396693] pci 0000:00:00.0: PME# disabled [ 1.396720] pci 0000:00:02.0: [8086:25e2] type 1 class 0x000604 [ 1.396767] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.396773] pci 0000:00:02.0: PME# disabled [ 1.396804] pci 0000:00:03.0: [8086:25e3] type 1 class 0x000604 [ 1.396856] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.396861] pci 0000:00:03.0: PME# disabled [ 1.396885] pci 0000:00:04.0: [8086:25f8] type 1 class 0x000604 [ 1.396933] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 1.396938] pci 0000:00:04.0: PME# disabled [ 1.396962] pci 0000:00:05.0: [8086:25e5] type 1 class 0x000604 [ 1.397008] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 1.397013] pci 0000:00:05.0: PME# disabled [ 1.397037] pci 0000:00:06.0: [8086:25f9] type 1 class 0x000604 [ 1.397085] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 1.397090] pci 0000:00:06.0: PME# disabled [ 1.397113] pci 0000:00:07.0: [8086:25e7] type 1 class 0x000604 [ 1.397161] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.397168] pci 0000:00:07.0: PME# disabled [ 1.397198] pci 0000:00:10.0: [8086:25f0] type 0 class 0x000600 [ 1.397239] pci 0000:00:10.1: [8086:25f0] type 0 class 0x000600 [ 1.397279] pci 0000:00:10.2: [8086:25f0] type 0 class 0x000600 [ 1.397330] pci 0000:00:11.0: [8086:25f1] type 0 class 0x000600 [ 1.397371] pci 0000:00:13.0: [8086:25f3] type 0 class 0x000600 [ 1.397411] pci 0000:00:15.0: [8086:25f5] type 0 class 0x000600 [ 1.397450] pci 0000:00:16.0: [8086:25f6] type 0 class 0x000600 [ 1.397501] pci 0000:00:1c.0: [8086:2690] type 1 class 0x000604 [ 1.397572] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.397579] pci 0000:00:1c.0: PME# disabled [ 1.397616] pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03 [ 1.397670] pci 0000:00:1d.0: reg 20: [io 0xcce0-0xccff] [ 1.397709] pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03 [ 1.397758] pci 0000:00:1d.1: reg 20: [io 0xccc0-0xccdf] [ 1.397796] pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03 [ 1.397845] pci 0000:00:1d.2: reg 20: [io 0xcca0-0xccbf] [ 1.397899] pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03 [ 1.397923] pci 0000:00:1d.7: reg 10: [mem 0xfc900000-0xfc9003ff] [ 1.398009] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.398016] pci 0000:00:1d.7: PME# disabled [ 1.398040] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 1.398107] pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601 [ 1.398205] pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101 [ 1.398223] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 1.398235] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 1.398247] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 1.398259] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 1.398271] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f] [ 1.398621] pci 0000:06:00.0: [8086:3500] type 1 class 0x000604 [ 1.401001] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.401091] pci 0000:06:00.0: PME# disabled [ 1.401962] pci 0000:06:00.3: [8086:350c] type 1 class 0x000604 [ 1.404294] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold [ 1.404385] pci 0000:06:00.3: PME# disabled [ 1.405118] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.405349] pci 0000:00:02.0: PCI bridge to [bus 06-0b] [ 1.405356] pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.405363] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff] [ 1.405372] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.407132] pci 0000:07:00.0: [8086:3510] type 1 class 0x000604 [ 1.409740] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 1.409830] pci 0000:07:00.0: PME# disabled [ 1.410454] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.410775] pci 0000:07:01.0: [8086:3514] type 1 class 0x000604 [ 1.413382] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold [ 1.413473] pci 0000:07:01.0: PME# disabled [ 1.414022] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.415396] pci 0000:06:00.0: PCI bridge to [bus 07-0a] [ 1.415487] pci 0000:06:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.415579] pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 1.415761] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.417821] pci 0000:08:00.0: [1166:0103] type 1 class 0x000604 [ 1.420089] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 1.420179] pci 0000:08:00.0: PME# disabled [ 1.420866] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.421096] pci 0000:07:00.0: PCI bridge to [bus 08-09] [ 1.421187] pci 0000:07:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.421278] pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 1.421461] pci 0000:07:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.423200] pci 0000:09:00.0: [14e4:164c] type 0 class 0x000200 [ 1.423979] pci 0000:09:00.0: reg 10: [mem 0xf4000000-0xf5ffffff 64bit] [ 1.426540] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 1.426631] pci 0000:09:00.0: PME# disabled [ 1.428370] pci 0000:08:00.0: PCI bridge to [bus 09-09] [ 1.428553] pci 0000:08:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.428644] pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 1.428827] pci 0000:08:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.430912] pci 0000:07:01.0: PCI bridge to [bus 0a-0a] [ 1.431003] pci 0000:07:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.431094] pci 0000:07:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.431277] pci 0000:07:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.434710] pci 0000:06:00.3: PCI bridge to [bus 0b-0b] [ 1.434800] pci 0000:06:00.3: bridge window [io 0xf000-0x0000] (disabled) [ 1.434891] pci 0000:06:00.3: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.435074] pci 0000:06:00.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.435531] pci 0000:01:00.0: [8086:0370] type 1 class 0x000604 [ 1.435596] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.435602] pci 0000:01:00.0: PME# disabled [ 1.435632] pci 0000:01:00.2: [8086:0372] type 1 class 0x000604 [ 1.435697] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 1.435703] pci 0000:01:00.2: PME# disabled [ 1.435725] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.435740] pci 0000:00:03.0: PCI bridge to [bus 01-03] [ 1.435745] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.435751] pci 0000:00:03.0: bridge window [mem 0xfc600000-0xfc8fffff] [ 1.435759] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 1.435834] pci 0000:02:0e.0: [1028:0015] type 0 class 0x000104 [ 1.435863] pci 0000:02:0e.0: reg 10: [mem 0xd80f0000-0xd80fffff pref] [ 1.435887] pci 0000:02:0e.0: reg 18: [mem 0xfc7e0000-0xfc7fffff] [ 1.435929] pci 0000:02:0e.0: reg 30: [mem 0xfc800000-0xfc807fff pref] [ 1.435963] pci 0000:02:0e.0: supports D1 [ 1.436003] pci 0000:01:00.0: PCI bridge to [bus 02-02] [ 1.436010] pci 0000:01:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.436017] pci 0000:01:00.0: bridge window [mem 0xfc700000-0xfc8fffff] [ 1.436026] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 1.436108] pci 0000:01:00.2: PCI bridge to [bus 03-03] [ 1.436115] pci 0000:01:00.2: bridge window [io 0xf000-0x0000] (disabled) [ 1.436121] pci 0000:01:00.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.436129] pci 0000:01:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.436187] pci 0000:0c:00.0: [8086:0340] type 1 class 0x000604 [ 1.436249] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 1.436255] pci 0000:0c:00.0: PME# disabled [ 1.436284] pci 0000:0c:00.2: [8086:0341] type 1 class 0x000604 [ 1.436350] pci 0000:0c:00.2: PME# supported from D0 D3hot D3cold [ 1.436356] pci 0000:0c:00.2: PME# disabled [ 1.436377] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.436390] pci 0000:00:04.0: PCI bridge to [bus 0c-0e] [ 1.436395] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 1.436401] pci 0000:00:04.0: bridge window [mem 0xfc300000-0xfc5fffff] [ 1.436408] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.436470] pci 0000:0d:04.0: [8086:108a] type 0 class 0x000200 [ 1.436497] pci 0000:0d:04.0: reg 10: [mem 0xfc4e0000-0xfc4fffff 64bit] [ 1.436525] pci 0000:0d:04.0: reg 20: [io 0xecc0-0xecff] [ 1.436569] pci 0000:0d:04.0: PME# supported from D0 D3hot [ 1.436575] pci 0000:0d:04.0: PME# disabled [ 1.436611] pci 0000:0d:04.1: [8086:108a] type 0 class 0x000200 [ 1.436638] pci 0000:0d:04.1: reg 10: [mem 0xfc4c0000-0xfc4dffff 64bit] [ 1.436669] pci 0000:0d:04.1: reg 20: [io 0xec80-0xecbf] [ 1.436716] pci 0000:0d:04.1: PME# supported from D0 D3hot [ 1.436722] pci 0000:0d:04.1: PME# disabled [ 1.436777] pci 0000:0c:00.0: PCI bridge to [bus 0d-0d] [ 1.436783] pci 0000:0c:00.0: bridge window [io 0xe000-0xefff] [ 1.436789] pci 0000:0c:00.0: bridge window [mem 0xfc400000-0xfc5fffff] [ 1.436798] pci 0000:0c:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.436899] pci 0000:0c:00.2: PCI bridge to [bus 0e-0e] [ 1.436905] pci 0000:0c:00.2: bridge window [io 0xf000-0x0000] (disabled) [ 1.436911] pci 0000:0c:00.2: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.436919] pci 0000:0c:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.436968] pci 0000:00:05.0: PCI bridge to [bus 0f-0f] [ 1.436974] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.436979] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.436986] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.437026] pci 0000:00:06.0: PCI bridge to [bus 10-10] [ 1.437031] pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.437037] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.437044] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.437082] pci 0000:00:07.0: PCI bridge to [bus 11-11] [ 1.437087] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.437093] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.437100] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.437168] pci 0000:04:00.0: [1166:0103] type 1 class 0x000604 [ 1.437248] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.437255] pci 0000:04:00.0: PME# disabled [ 1.437277] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.437290] pci 0000:00:1c.0: PCI bridge to [bus 04-05] [ 1.437296] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.437303] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff] [ 1.437311] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.437378] pci 0000:05:00.0: [14e4:164c] type 0 class 0x000200 [ 1.437409] pci 0000:05:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] [ 1.437500] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 1.437507] pci 0000:05:00.0: PME# disabled [ 1.437576] pci 0000:04:00.0: PCI bridge to [bus 05-05] [ 1.437586] pci 0000:04:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.437594] pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff] [ 1.437603] pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.437675] pci 0000:12:0d.0: [1002:515e] type 0 class 0x000300 [ 1.437698] pci 0000:12:0d.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] [ 1.437712] pci 0000:12:0d.0: reg 14: [io 0xdc00-0xdcff] [ 1.437725] pci 0000:12:0d.0: reg 18: [mem 0xfc1f0000-0xfc1fffff] [ 1.437768] pci 0000:12:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.437793] pci 0000:12:0d.0: supports D1 D2 [ 1.437833] pci 0000:00:1e.0: PCI bridge to [bus 12-12] (subtractive decode) [ 1.437841] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 1.437847] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff] [ 1.437856] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] [ 1.437861] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 1.437865] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 1.437907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.438429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 1.438574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] [ 1.438674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] [ 1.438812] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] [ 1.438952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 1.439088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT] [ 1.439200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 1.439344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] [ 1.439478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] [ 1.439616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] [ 1.439712] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.445829] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12) [ 1.445951] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 12) [ 1.446076] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12) [ 1.446194] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 12) [ 1.446311] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12) [ 1.446427] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) [ 1.446550] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 1.446669] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 1.446890] vgaarb: device added: PCI:0000:12:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 1.446895] vgaarb: loaded [ 1.447220] SCSI subsystem initialized [ 1.447290] libata version 3.00 loaded. [ 1.447290] usbcore: registered new interface driver usbfs [ 1.447290] usbcore: registered new interface driver hub [ 1.447290] usbcore: registered new device driver usb [ 1.447290] wmi: Mapper loaded [ 1.447290] PCI: Using ACPI for IRQ routing [ 1.447290] PCI: pci_cache_line_size set to 64 bytes [ 1.447290] reserve RAM buffer: 00000000cffa8000 - 00000000cfffffff [ 1.447290] NetLabel: Initializing [ 1.447290] NetLabel: domain hash size = 128 [ 1.447290] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.447290] NetLabel: unlabeled traffic allowed by default [ 1.447290] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.447290] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.447290] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.510061] Switching to clocksource hpet [ 1.510111] Switched to NOHz mode on CPU #6 [ 1.510218] Switched to NOHz mode on CPU #1 [ 1.519582] Switched to NOHz mode on CPU #0 [ 1.519658] Switched to NOHz mode on CPU #4 [ 1.519741] Switched to NOHz mode on CPU #2 [ 1.519786] Switched to NOHz mode on CPU #7 [ 1.519791] Switched to NOHz mode on CPU #5 [ 1.519794] Switched to NOHz mode on CPU #3 [ 1.520826] AppArmor: AppArmor Filesystem Enabled [ 1.520874] pnp: PnP ACPI init [ 1.520898] ACPI: bus type pnp registered [ 1.521067] pnp 00:00: [bus 00-ff] [ 1.521072] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.521075] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.521077] pnp 00:00: [io 0x0d00-0xffff window] [ 1.521080] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.521082] pnp 00:00: [mem 0xd0000000-0xfdffffff window] [ 1.521143] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.521213] pnp 00:01: [io 0x0080-0x009f] [ 1.521216] pnp 00:01: [io 0x0000-0x001f] [ 1.521218] pnp 00:01: [io 0x00c0-0x00df] [ 1.521221] pnp 00:01: [dma 4] [ 1.521260] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.521289] pnp 00:02: [io 0x00f0-0x00ff] [ 1.521304] pnp 00:02: [irq 13] [ 1.521339] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.521370] pnp 00:03: [io 0x0061] [ 1.521469] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.521498] pnp 00:04: [io 0x0070-0x007f] [ 1.521506] pnp 00:04: [irq 8] [ 1.521541] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.521713] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (disabled) [ 1.521925] pnp 00:06: [io 0x03f8-0x03ff] [ 1.521933] pnp 00:06: [irq 4] [ 1.522045] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.522255] pnp 00:07: [io 0x02f8-0x02ff] [ 1.522263] pnp 00:07: [irq 3] [ 1.522376] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.524583] pnp 00:08: [io 0x0800-0x087f] [ 1.524586] pnp 00:08: [io 0x0880-0x08bf] [ 1.524592] pnp 00:08: [io 0x08c0-0x08df] [ 1.524594] pnp 00:08: [io 0x08e0-0x08e3] [ 1.524596] pnp 00:08: [io 0x0c00-0x0c7f] [ 1.524598] pnp 00:08: [io 0x0ca0-0x0ca7] [ 1.524600] pnp 00:08: [io 0x0ca9-0x0cab] [ 1.524602] pnp 00:08: [io 0x0cad-0x0caf] [ 1.524604] pnp 00:08: [io 0x0060] [ 1.524606] pnp 00:08: [io 0x0064] [ 1.524683] system 00:08: [io 0x0800-0x087f] has been reserved [ 1.524686] system 00:08: [io 0x0880-0x08bf] has been reserved [ 1.524692] system 00:08: [io 0x08c0-0x08df] has been reserved [ 1.524695] system 00:08: [io 0x08e0-0x08e3] has been reserved [ 1.524697] system 00:08: [io 0x0c00-0x0c7f] has been reserved [ 1.524700] system 00:08: [io 0x0ca0-0x0ca7] has been reserved [ 1.524702] system 00:08: [io 0x0ca9-0x0cab] has been reserved [ 1.524705] system 00:08: [io 0x0cad-0x0caf] has been reserved [ 1.524709] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.524785] pnp 00:09: [io 0x0ca8] [ 1.524788] pnp 00:09: [io 0x0cac] [ 1.524858] system 00:09: [io 0x0ca8] has been reserved [ 1.524861] system 00:09: [io 0x0cac] has been reserved [ 1.524865] system 00:09: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 1.524956] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 1.525028] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 1.525032] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.525083] pnp 00:0b: [mem 0xfed00000-0xfed003ff] [ 1.525128] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.525379] pnp: PnP ACPI: found 12 devices [ 1.525382] ACPI: ACPI bus type pnp unregistered [ 1.533701] pci 0000:08:00.0: PCI bridge to [bus 09-09] [ 1.533704] pci 0000:08:00.0: bridge window [io disabled] [ 1.533806] pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 1.533897] pci 0000:08:00.0: bridge window [mem pref disabled] [ 1.534080] pci 0000:07:00.0: PCI bridge to [bus 08-09] [ 1.534082] pci 0000:07:00.0: bridge window [io disabled] [ 1.534217] pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 1.534308] pci 0000:07:00.0: bridge window [mem pref disabled] [ 1.534491] pci 0000:07:01.0: PCI bridge to [bus 0a-0a] [ 1.534493] pci 0000:07:01.0: bridge window [io disabled] [ 1.534628] pci 0000:07:01.0: bridge window [mem disabled] [ 1.534720] pci 0000:07:01.0: bridge window [mem pref disabled] [ 1.534903] pci 0000:06:00.0: PCI bridge to [bus 07-0a] [ 1.534905] pci 0000:06:00.0: bridge window [io disabled] [ 1.535040] pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 1.535132] pci 0000:06:00.0: bridge window [mem pref disabled] [ 1.535315] pci 0000:06:00.3: PCI bridge to [bus 0b-0b] [ 1.535317] pci 0000:06:00.3: bridge window [io disabled] [ 1.535452] pci 0000:06:00.3: bridge window [mem disabled] [ 1.535543] pci 0000:06:00.3: bridge window [mem pref disabled] [ 1.535727] pci 0000:00:02.0: PCI bridge to [bus 06-0b] [ 1.535729] pci 0000:00:02.0: bridge window [io disabled] [ 1.535733] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff] [ 1.535737] pci 0000:00:02.0: bridge window [mem pref disabled] [ 1.535742] pci 0000:01:00.0: PCI bridge to [bus 02-02] [ 1.535744] pci 0000:01:00.0: bridge window [io disabled] [ 1.535749] pci 0000:01:00.0: bridge window [mem 0xfc700000-0xfc8fffff] [ 1.535754] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 1.535760] pci 0000:01:00.2: PCI bridge to [bus 03-03] [ 1.535762] pci 0000:01:00.2: bridge window [io disabled] [ 1.535767] pci 0000:01:00.2: bridge window [mem disabled] [ 1.535771] pci 0000:01:00.2: bridge window [mem pref disabled] [ 1.535777] pci 0000:00:03.0: PCI bridge to [bus 01-03] [ 1.535779] pci 0000:00:03.0: bridge window [io disabled] [ 1.535783] pci 0000:00:03.0: bridge window [mem 0xfc600000-0xfc8fffff] [ 1.535787] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] [ 1.535793] pci 0000:0c:00.0: PCI bridge to [bus 0d-0d] [ 1.535796] pci 0000:0c:00.0: bridge window [io 0xe000-0xefff] [ 1.535802] pci 0000:0c:00.0: bridge window [mem 0xfc400000-0xfc5fffff] [ 1.535806] pci 0000:0c:00.0: bridge window [mem pref disabled] [ 1.535812] pci 0000:0c:00.2: PCI bridge to [bus 0e-0e] [ 1.535814] pci 0000:0c:00.2: bridge window [io disabled] [ 1.535819] pci 0000:0c:00.2: bridge window [mem disabled] [ 1.535822] pci 0000:0c:00.2: bridge window [mem pref disabled] [ 1.535828] pci 0000:00:04.0: PCI bridge to [bus 0c-0e] [ 1.535831] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 1.535836] pci 0000:00:04.0: bridge window [mem 0xfc300000-0xfc5fffff] [ 1.535840] pci 0000:00:04.0: bridge window [mem pref disabled] [ 1.535845] pci 0000:00:05.0: PCI bridge to [bus 0f-0f] [ 1.535847] pci 0000:00:05.0: bridge window [io disabled] [ 1.535851] pci 0000:00:05.0: bridge window [mem disabled] [ 1.535854] pci 0000:00:05.0: bridge window [mem pref disabled] [ 1.535859] pci 0000:00:06.0: PCI bridge to [bus 10-10] [ 1.535861] pci 0000:00:06.0: bridge window [io disabled] [ 1.535865] pci 0000:00:06.0: bridge window [mem disabled] [ 1.535868] pci 0000:00:06.0: bridge window [mem pref disabled] [ 1.535874] pci 0000:00:07.0: PCI bridge to [bus 11-11] [ 1.535875] pci 0000:00:07.0: bridge window [io disabled] [ 1.535879] pci 0000:00:07.0: bridge window [mem disabled] [ 1.535883] pci 0000:00:07.0: bridge window [mem pref disabled] [ 1.535888] pci 0000:04:00.0: PCI bridge to [bus 05-05] [ 1.535890] pci 0000:04:00.0: bridge window [io disabled] [ 1.535897] pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff] [ 1.535902] pci 0000:04:00.0: bridge window [mem pref disabled] [ 1.535909] pci 0000:00:1c.0: PCI bridge to [bus 04-05] [ 1.535911] pci 0000:00:1c.0: bridge window [io disabled] [ 1.535917] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff] [ 1.535921] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 1.535933] pci 0000:12:0d.0: BAR 6: assigned [mem 0xfc100000-0xfc11ffff pref] [ 1.535937] pci 0000:00:1e.0: PCI bridge to [bus 12-12] [ 1.535940] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 1.535946] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff] [ 1.535950] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] [ 1.535974] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.535980] pci 0000:00:02.0: setting latency timer to 64 [ 1.536049] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.536138] pci 0000:06:00.0: setting latency timer to 64 [ 1.536276] pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.536367] pci 0000:07:00.0: setting latency timer to 64 [ 1.536596] pci 0000:08:00.0: setting latency timer to 64 [ 1.536734] pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.536825] pci 0000:07:01.0: setting latency timer to 64 [ 1.537053] pci 0000:06:00.3: setting latency timer to 64 [ 1.537102] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.537106] pci 0000:00:03.0: setting latency timer to 64 [ 1.537113] pci 0000:01:00.0: setting latency timer to 64 [ 1.537120] pci 0000:01:00.2: setting latency timer to 64 [ 1.537126] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.537130] pci 0000:00:04.0: setting latency timer to 64 [ 1.537137] pci 0000:0c:00.0: setting latency timer to 64 [ 1.537144] pci 0000:0c:00.2: setting latency timer to 64 [ 1.537150] pci 0000:00:05.0: setting latency timer to 64 [ 1.537156] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.537160] pci 0000:00:06.0: setting latency timer to 64 [ 1.537166] pci 0000:00:07.0: setting latency timer to 64 [ 1.537172] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.537176] pci 0000:00:1c.0: setting latency timer to 64 [ 1.537185] pci 0000:04:00.0: setting latency timer to 64 [ 1.537193] pci 0000:00:1e.0: setting latency timer to 64 [ 1.537197] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 1.537200] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 1.537203] pci_bus 0000:06: resource 1 [mem 0xf2000000-0xf7ffffff] [ 1.537205] pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf7ffffff] [ 1.537208] pci_bus 0000:08: resource 1 [mem 0xf4000000-0xf7ffffff] [ 1.537211] pci_bus 0000:09: resource 1 [mem 0xf4000000-0xf7ffffff] [ 1.537213] pci_bus 0000:01: resource 1 [mem 0xfc600000-0xfc8fffff] [ 1.537216] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref] [ 1.537218] pci_bus 0000:02: resource 1 [mem 0xfc700000-0xfc8fffff] [ 1.537221] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref] [ 1.537224] pci_bus 0000:0c: resource 0 [io 0xe000-0xefff] [ 1.537226] pci_bus 0000:0c: resource 1 [mem 0xfc300000-0xfc5fffff] [ 1.537228] pci_bus 0000:0d: resource 0 [io 0xe000-0xefff] [ 1.537231] pci_bus 0000:0d: resource 1 [mem 0xfc400000-0xfc5fffff] [ 1.537234] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfbffffff] [ 1.537236] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xfbffffff] [ 1.537239] pci_bus 0000:12: resource 0 [io 0xd000-0xdfff] [ 1.537241] pci_bus 0000:12: resource 1 [mem 0xfc100000-0xfc2fffff] [ 1.537244] pci_bus 0000:12: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref] [ 1.537246] pci_bus 0000:12: resource 4 [io 0x0000-0xffff] [ 1.537248] pci_bus 0000:12: resource 5 [mem 0x00000000-0xfffffffff] [ 1.537295] NET: Registered protocol family 2 [ 1.538130] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.541637] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.545456] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.545928] TCP: Hash tables configured (established 524288 bind 65536) [ 1.545931] TCP reno registered [ 1.545993] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.546155] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.546436] NET: Registered protocol family 1 [ 1.546603] pci 0000:00:1f.0: rerouting interrupts for [8086:2670] [ 1.546843] pci 0000:01:00.0: rerouting interrupts for [8086:0370] [ 1.546849] pci 0000:01:00.2: rerouting interrupts for [8086:0372] [ 1.546875] pci 0000:12:0d.0: Boot video device [ 1.546879] PCI: CLS 64 bytes, default 64 [ 1.546883] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.546886] Placing 64MB software IO TLB between ffff8800cbc00000 - ffff8800cfc00000 [ 1.546889] software IO TLB at phys 0xcbc00000 - 0xcfc00000 [ 1.547577] audit: initializing netlink socket (disabled) [ 1.547591] type=2000 audit(1312662306.540:1): initialized [ 1.561193] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.563423] VFS: Disk quotas dquot_6.5.2 [ 1.563493] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.564372] fuse init (API version 7.16) [ 1.564493] msgmni has been set to 32118 [ 1.564922] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.564983] io scheduler noop registered [ 1.564986] io scheduler deadline registered (default) [ 1.565041] io scheduler cfq registered [ 1.565379] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.565443] pcieport 0000:00:1c.0: irq 104 for MSI/MSI-X [ 1.569658] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.569687] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.569855] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.569862] ACPI: Power Button [PWRF] [ 1.570070] ACPI: acpi_idle registered with cpuidle [ 1.574366] ERST: Table is not found! [ 1.574491] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.595091] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.760551] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.793721] Freeing initrd memory: 19528k freed [ 1.943199] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.963866] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.964260] Linux agpgart interface v0.103 [ 1.965746] brd: module loaded [ 1.966392] loop: module loaded [ 1.966515] i2c-core: driver [adp5520] using legacy suspend method [ 1.966517] i2c-core: driver [adp5520] using legacy resume method [ 1.966667] ata_piix 0000:00:1f.1: version 2.13 [ 1.966682] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.966728] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.967185] scsi0 : ata_piix [ 1.967317] scsi1 : ata_piix [ 1.967377] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.967380] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.967556] ata2: port disabled. ignoring. [ 1.967778] Fixed MDIO Bus: probed [ 1.967813] PPP generic driver version 2.4.2 [ 1.967875] tun: Universal TUN/TAP device driver, 1.6 [ 1.967877] tun: (C) 1999-2004 Max Krasnyansky [ 1.967995] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.968024] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.968067] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.968072] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.968128] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.968214] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.972103] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.972123] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc900000 [ 1.990019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.990197] hub 1-0:1.0: USB hub found [ 1.990203] hub 1-0:1.0: 6 ports detected [ 1.990311] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.990329] uhci_hcd: USB Universal Host Controller Interface driver [ 1.990393] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.990400] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.990403] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.990450] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.990509] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cce0 [ 1.990663] hub 2-0:1.0: USB hub found [ 1.990668] hub 2-0:1.0: 2 ports detected [ 1.990764] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.990771] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.990774] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.990827] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.990895] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ccc0 [ 1.991050] hub 3-0:1.0: USB hub found [ 1.991055] hub 3-0:1.0: 2 ports detected [ 1.991143] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 1.991150] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.991154] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.991199] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.000071] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000cca0 [ 2.000237] hub 4-0:1.0: USB hub found [ 2.000243] hub 4-0:1.0: 2 ports detected [ 2.000398] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.002980] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.002997] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.003169] mousedev: PS/2 mouse device common for all mice [ 2.003282] rtc_cmos 00:04: RTC can wake from S4 [ 2.003457] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.003485] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.003633] device-mapper: uevent: version 1.0.3 [ 2.003731] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 2.003850] device-mapper: multipath: version 1.2.0 loaded [ 2.003856] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.004054] cpuidle: using governor ladder [ 2.004059] cpuidle: using governor menu [ 2.004419] TCP cubic registered [ 2.004563] NET: Registered protocol family 10 [ 2.005203] NET: Registered protocol family 17 [ 2.005224] Registering the dns_resolver key type [ 2.005444] PM: Hibernation image not present or could not be loaded. [ 2.005460] registered taskstats version 1 [ 2.008881] Magic number: 7:957:446 [ 2.008982] rtc_cmos 00:04: setting system clock to 2011-08-06 20:25:07 UTC (1312662307) [ 2.008986] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.008987] EDD information not available. [ 2.140323] ata1.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462D, DE04, max UDMA/33 [ 2.200208] ata1.00: configured for UDMA/33 [ 2.232453] scsi 0:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462D DE04 PQ: 0 ANSI: 5 [ 2.270109] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.270115] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.270298] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.270405] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.272309] Freeing unused kernel memory: 880k freed [ 2.272713] Write protecting the kernel read-only data: 10240k [ 2.273274] Freeing unused kernel memory: 100k freed [ 2.278483] Freeing unused kernel memory: 1416k freed [ 2.305914] <30>udev[92]: starting version 167 [ 2.311321] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.352499] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.21 (Dec 23, 2010) [ 2.352592] bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.354845] megasas: 00.00.05.29-rc1 Tue. Dec. 7 17:00:00 PDT 2010 [ 2.354902] megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0 [ 2.354943] megaraid_sas 0000:02:0e.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78 [ 2.356314] megasas: FW now in Ready state [ 2.360278] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.360283] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.360344] e1000 0000:0d:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.382421] [drm] Initialized drm 1.1.0 20060810 [ 2.410036] megasas_init_mfi: fw_support_ieee=0 [ 2.410041] megasas: INIT adapter done [ 2.422170] [drm] radeon defaulting to kernel modesetting. [ 2.422174] [drm] radeon kernel modesetting enabled. [ 2.422279] radeon 0000:12:0d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.424754] [drm] initializing kernel modesetting (RV100 0x1002:0x515E). [ 2.424799] [drm] register mmio base: 0xFC1F0000 [ 2.424801] [drm] register mmio size: 65536 [ 2.424938] radeon 0000:12:0d.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used) [ 2.424941] radeon 0000:12:0d.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [ 2.424951] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.424954] [drm] Driver supports precise vblank timestamp query. [ 2.424982] [drm] radeon: irq initialized. [ 2.649964] [drm] Detected VRAM RAM=128M, BAR=128M [ 2.649979] Refined TSC clocksource calibration: 3724.092 MHz. [ 2.650040] Switching to clocksource tsc [ 2.650059] [drm] RAM width 16bits DDR [ 2.650210] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 2.650215] ata1.00: ST_FIRST: !(DRQ|ERR|DF) [ 2.650231] sr 0:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00 [ 2.650252] ata1.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in [ 2.650255] res 50/00:01:00:08:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [ 2.650259] ata1.00: status: { DRDY } [ 2.650277] [TTM] Zone kernel: Available graphics memory: 8233370 kiB. [ 2.650280] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 2.650282] [TTM] Initializing pool allocator. [ 2.650293] ata1: soft resetting link [ 2.650312] [drm] radeon: 16M of VRAM memory ready [ 2.650315] [drm] radeon: 512M of GTT memory ready. [ 2.650354] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.672669] radeon 0000:12:0d.0: WB enabled [ 2.672758] [drm] Loading R100 Microcode [ 2.675273] [drm] radeon: ring at 0x00000000B0001000 [ 2.675301] [drm] ring test succeeded in 3 usecs [ 2.675478] [drm] radeon: ib pool ready. [ 2.675600] [drm] ib test succeeded in 0 usecs [ 2.675871] [drm] Radeon Display Connectors [ 2.675873] [drm] Connector 0: [ 2.675875] [drm] VGA [ 2.675878] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 2.675879] [drm] Encoders: [ 2.675881] [drm] CRT1: INTERNAL_DAC1 [ 2.680783] hub 1-1:1.0: USB hub found [ 2.680933] hub 1-1:1.0: 2 ports detected [ 2.690296] e1000 0000:0d:04.0: eth0: (PCI-X:133MHz:64-bit) 00:0e:0c:b6:5b:bc [ 2.690309] e1000 0000:0d:04.0: eth0: Intel(R) PRO/1000 Network Connection [ 2.690349] e1000 0000:0d:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.706567] [drm] fb mappable at 0xD0040000 [ 2.706570] [drm] vram apper at 0xD0000000 [ 2.706571] [drm] size 786432 [ 2.706573] [drm] fb depth is 8 [ 2.706575] [drm] pitch is 1024 [ 2.706675] fbcon: radeondrmfb (fb0) is primary device [ 2.710080] megaraid_sas: fw state:c0000000 [ 2.710085] megasas: fwstate:c0000000, dis_OCR=0 [ 2.710113] scsi2 : LSI SAS based MegaRAID driver [ 2.710960] scsi 2:0:0:0: Direct-Access MAXTOR ATLAS10K5_300SAS BP00 PQ: 0 ANSI: 5 [ 2.711590] scsi 2:0:1:0: Direct-Access MAXTOR ATLAS10K5_300SAS BP00 PQ: 0 ANSI: 5 [ 2.760135] scsi 2:0:8:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5 [ 2.780111] scsi 2:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5 [ 2.794634] scsi 2:0:8:0: Attached scsi generic sg1 type 13 [ 2.794881] sd 2:2:0:0: Attached scsi generic sg2 type 0 [ 2.795238] sd 2:2:0:0: [sda] 1169686528 512-byte logical blocks: (598 GB/557 GiB) [ 2.795400] sd 2:2:0:0: [sda] Write Protect is off [ 2.795404] sd 2:2:0:0: [sda] Mode Sense: 1f 00 10 08 [ 2.795493] sd 2:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 2.796224] sda: sda1 sda2 < sda5 > [ 2.796781] sd 2:2:0:0: [sda] Attached SCSI disk [ 2.800101] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 2.856961] Console: switching to colour frame buffer device 128x48 [ 2.864720] fb0: radeondrmfb frame buffer device [ 2.864723] drm: registered panic notifier [ 2.864732] [drm] Initialized radeon 2.8.0 20080528 for 0000:12:0d.0 on minor 0 [ 2.890207] ata1.00: configured for UDMA/33 [ 2.890743] ses 2:0:8:0: Attached Enclosure device [ 2.897743] ata1: EH complete [ 2.950752] hub 1-5:1.0: USB hub found [ 2.950810] hub 1-5:1.0: 4 ports detected [ 3.020387] e1000 0000:0d:04.1: eth1: (PCI-X:133MHz:64-bit) 00:0e:0c:b6:5b:bd [ 3.020397] e1000 0000:0d:04.1: eth1: Intel(R) PRO/1000 Network Connection [ 3.050196] usb 1-1.1: new full speed USB device using ehci_hcd and address 4 [ 3.195191] input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input1 [ 3.195345] generic-usb 0003:413C:0000.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1/input0 [ 3.196646] input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input2 [ 3.196819] generic-usb 0003:413C:0000.0002: input,hidraw1: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1/input1 [ 3.196841] usbcore: registered new interface driver usbhid [ 3.196844] usbhid: USB HID core driver [ 3.205713] bnx2 0000:09:00.0: eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:19:b9:e1:9b:24 [ 3.205754] bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.260201] usb 1-1.2: new high speed USB device using ehci_hcd and address 5 [ 3.377363] usbcore: registered new interface driver uas [ 3.383535] Initializing USB Mass Storage driver... [ 3.383753] scsi3 : usb-storage 1-1.2:1.0 [ 3.384021] scsi4 : usb-storage 1-1.2:1.1 [ 3.384277] scsi5 : usb-storage 1-1.2:1.2 [ 3.384432] usbcore: registered new interface driver usb-storage [ 3.384436] USB Mass Storage support registered. [ 3.805172] bnx2 0000:05:00.0: eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:19:b9:e1:9b:22 [ 4.380731] scsi 4:0:0:0: Direct-Access Dell Virtual Floppy 123 PQ: 0 ANSI: 0 CCS [ 4.380982] scsi 5:0:0:0: Direct-Access Dell Virtual Flash 123 PQ: 0 ANSI: 0 CCS [ 4.381734] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 4.382111] scsi 3:0:0:0: CD-ROM Dell Virtual CDROM 123 PQ: 0 ANSI: 0 CCS [ 4.383949] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 4.384725] sr1: scsi-1 drive [ 4.384995] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 4.385178] sr 3:0:0:0: Attached scsi generic sg4 type 5 [ 4.386390] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 4.386970] sd 5:0:0:0: [sdc] 32768 512-byte logical blocks: (16.7 MB/16.0 MiB) [ 4.387707] sd 5:0:0:0: [sdc] Write Protect is off [ 4.387713] sd 5:0:0:0: [sdc] Mode Sense: 24 00 00 00 [ 4.387718] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 4.390451] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 4.493834] sdc: unknown partition table [ 4.593583] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 4.593591] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 5.380046] floppy0: no floppy controllers found [ 10.722422] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 11.440028] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 11.689132] hub 3-1:1.0: USB hub found [ 11.691058] hub 3-1:1.0: 4 ports detected [ 11.971070] usb 3-1.3: new full speed USB device using uhci_hcd and address 3 [ 12.117082] hub 3-1.3:1.0: USB hub found [ 12.118055] hub 3-1.3:1.0: 3 ports detected [ 12.401066] usb 3-1.3.1: new full speed USB device using uhci_hcd and address 4 [ 12.551364] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/input/input3 [ 12.551472] generic-usb 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input0 [ 12.558179] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/input/input4 [ 12.558321] generic-usb 0003:413C:2010.0004: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input1 [ 12.641059] usb 3-1.3.2: new low speed USB device using uhci_hcd and address 5 [ 12.805265] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input5 [ 12.805400] generic-usb 0003:045E:0039.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3.2/input0 [ 16.526315] <30>udev[384]: starting version 167 [ 16.528182] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 16.543212] lp: driver loaded but no devices found [ 16.585654] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.635763] intel_rng: FWH not detected [ 16.636500] type=1400 audit(1312662322.113:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=476 comm="apparmor_parser" [ 16.637393] type=1400 audit(1312662322.113:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=476 comm="apparmor_parser" [ 16.637959] type=1400 audit(1312662322.113:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=476 comm="apparmor_parser" [ 16.661170] <30>udev[397]: renamed network interface eth2 to eth2-eth1 [ 16.680132] EDAC MC: Ver: 2.1.0 Jul 29 2011 [ 16.684869] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 16.684935] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) [ 16.712068] <30>udev[405]: renamed network interface eth1 to eth2 [ 16.790402] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 16.790429] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.791873] <30>udev[397]: renamed network interface eth2-eth1 to eth1 [ 16.793709] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.800272] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 16.936180] bnx2 0000:09:00.0: irq 105 for MSI/MSI-X [ 16.955217] type=1400 audit(1312662322.433:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=906 comm="apparmor_parser" [ 16.955555] type=1400 audit(1312662322.433:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=907 comm="apparmor_parser" [ 16.955671] type=1400 audit(1312662322.433:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=913 comm="apparmor_parser" [ 16.956468] type=1400 audit(1312662322.433:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=907 comm="apparmor_parser" [ 16.957044] type=1400 audit(1312662322.433:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=907 comm="apparmor_parser" [ 16.959777] type=1400 audit(1312662322.433:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=910 comm="apparmor_parser" [ 16.962349] type=1400 audit(1312662322.443:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=912 comm="apparmor_parser" [ 17.070274] bnx2 0000:09:00.0: eth1: using MSI [ 17.073043] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.080400] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.081865] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 17.084605] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 17.088153] bnx2 0000:05:00.0: irq 106 for MSI/MSI-X [ 17.230258] bnx2 0000:05:00.0: eth3: using MSI [ 17.232065] ADDRCONF(NETDEV_UP): eth3: link is not ready [ 18.873070] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 [ 19.600070] floppy0: no floppy controllers found [ 19.711589] ppdev: user-space parallel port driver [ 19.764673] Bridge firewalling registered [ 19.785464] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.831833] Intel AES-NI instructions are not detected. [ 19.845680] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 19.882191] padlock_aes: VIA PadLock not detected. [ 19.980634] padlock_sha: VIA PadLock Hash Engine not detected. [ 20.146601] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [ 20.148578] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 20.165672] Adding 16773116k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:16773116k [ 20.348703] bnx2 0000:05:00.0: eth3: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [ 20.350737] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready [ 20.487455] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 27.350010] eth0: no IPv6 routers present [ 28.040017] eth2: no IPv6 routers present [ 29.050069] usb 3-1: USB disconnect, address 2 [ 29.050074] usb 3-1.3: USB disconnect, address 3 [ 29.050078] usb 3-1.3.1: USB disconnect, address 4 [ 29.390189] usb 3-1.3.2: USB disconnect, address 5 [ 30.640051] eth1: no IPv6 routers present [ 31.300016] eth3: no IPv6 routers present [ 36.860034] usb 3-1: new full speed USB device using uhci_hcd and address 6 [ 37.048890] hub 3-1:1.0: USB hub found [ 37.050831] hub 3-1:1.0: 4 ports detected [ 37.341677] usb 3-1.3: new full speed USB device using uhci_hcd and address 7 [ 37.486647] hub 3-1.3:1.0: USB hub found [ 37.487697] hub 3-1.3:1.0: 3 ports detected [ 37.771464] usb 3-1.3.1: new full speed USB device using uhci_hcd and address 8 [ 38.030240] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/input/input6 [ 38.030500] generic-usb 0003:413C:2010.0006: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input0 [ 38.038492] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/input/input7 [ 38.038727] generic-usb 0003:413C:2010.0007: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input1 [ 38.121289] usb 3-1.3.2: new low speed USB device using uhci_hcd and address 9 [ 38.283461] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input8 [ 38.283719] generic-usb 0003:045E:0039.0008: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3.2/input0 [ 57.540051] usb 3-1: USB disconnect, address 6 [ 57.540057] usb 3-1.3: USB disconnect, address 7 [ 57.540060] usb 3-1.3.1: USB disconnect, address 8 [ 58.110163] usb 3-1.3.2: USB disconnect, address 9 [ 110.490020] usb 3-1: new full speed USB device using uhci_hcd and address 10 [ 110.679896] hub 3-1:1.0: USB hub found [ 110.681891] hub 3-1:1.0: 4 ports detected [ 110.961690] usb 3-1.3: new full speed USB device using uhci_hcd and address 11 [ 111.106658] hub 3-1.3:1.0: USB hub found [ 111.107656] hub 3-1.3:1.0: 3 ports detected [ 111.391473] usb 3-1.3.1: new full speed USB device using uhci_hcd and address 12 [ 111.600159] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/input/input9 [ 111.600344] generic-usb 0003:413C:2010.0009: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input0 [ 111.608484] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/input/input10 [ 111.608692] generic-usb 0003:413C:2010.000A: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input1 [ 111.701330] usb 3-1.3.2: new low speed USB device using uhci_hcd and address 13 [ 111.874501] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input11 [ 111.874772] generic-usb 0003:045E:0039.000B: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3.2/input0 [ 112.290053] usb 3-1: USB disconnect, address 10 [ 112.290057] usb 3-1.3: USB disconnect, address 11 [ 112.290060] usb 3-1.3.1: USB disconnect, address 12 [ 112.650141] usb 3-1.3.2: USB disconnect, address 13 [ 233.730019] usb 3-1: new full speed USB device using uhci_hcd and address 14 [ 233.919896] hub 3-1:1.0: USB hub found [ 233.921857] hub 3-1:1.0: 4 ports detected [ 234.201693] usb 3-1.3: new full speed USB device using uhci_hcd and address 15 [ 234.346664] hub 3-1.3:1.0: USB hub found [ 234.347842] hub 3-1.3:1.0: 3 ports detected [ 234.631476] usb 3-1.3.1: new full speed USB device using uhci_hcd and address 16 [ 234.880160] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/input/input12 [ 234.880404] generic-usb 0003:413C:2010.000C: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input0 [ 234.888470] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/input/input13 [ 234.888681] generic-usb 0003:413C:2010.000D: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input1 [ 234.971310] usb 3-1.3.2: new low speed USB device using uhci_hcd and address 17 [ 235.144494] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input14 [ 235.144819] generic-usb 0003:045E:0039.000E: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3.2/input0 [ 243.290047] usb 3-1: USB disconnect, address 14 [ 243.290052] usb 3-1.3: USB disconnect, address 15 [ 243.290055] usb 3-1.3.1: USB disconnect, address 16 [ 243.630177] usb 3-1.3.2: USB disconnect, address 17 [ 398.640023] usb 3-1: new full speed USB device using uhci_hcd and address 18 [ 398.829894] hub 3-1:1.0: USB hub found [ 398.832005] hub 3-1:1.0: 4 ports detected [ 399.121680] usb 3-1.3: new full speed USB device using uhci_hcd and address 19 [ 399.266653] hub 3-1.3:1.0: USB hub found [ 399.267990] hub 3-1.3:1.0: 3 ports detected [ 399.551464] usb 3-1.3.1: new full speed USB device using uhci_hcd and address 20 [ 399.790178] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/input/input15 [ 399.790397] generic-usb 0003:413C:2010.000F: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input0 [ 399.798451] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/input/input16 [ 399.798650] generic-usb 0003:413C:2010.0010: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input1 [ 399.891298] usb 3-1.3.2: new low speed USB device using uhci_hcd and address 21 [ 400.054494] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input17 [ 400.054751] generic-usb 0003:045E:0039.0011: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3.2/input0 [ 418.290050] usb 3-1: USB disconnect, address 18 [ 418.290055] usb 3-1.3: USB disconnect, address 19 [ 418.290058] usb 3-1.3.1: USB disconnect, address 20 [ 418.620175] usb 3-1.3.2: USB disconnect, address 21 [ 4180.840014] ------------[ cut here ]------------ [ 4180.840028] WARNING: at /build/buildd/linux-2.6.38/net/sched/sch_generic.c:256 dev_watchdog+0x2a0/0x2b0() [ 4180.840032] Hardware name: PowerEdge 1950 [ 4180.840034] NETDEV WATCHDOG: eth1 (bnx2): transmit queue 0 timed out [ 4180.840037] Modules linked in: ip6table_filter ip6_tables binfmt_misc sha256_generic ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack cryptd aes_x86_64 aes_generic ipt_REJECT xt_CHECKSUM iptable_mangle xt_tcpudp iptable_filter ip_tables x_tables bridge stp parport_pc dm_crypt ppdev kvm_intel kvm dcdbas psmouse serio_raw i5000_edac edac_core i5k_amb joydev shpchp lp parport usb_storage uas usbhid hid ses enclosure radeon ttm drm_kms_helper drm i2c_algo_bit e1000 megaraid_sas bnx2 [ 4180.840093] Pid: 0, comm: kworker/0:1 Not tainted 2.6.38-11-server #48-Ubuntu [ 4180.840095] Call Trace: [ 4180.840098] [] ? warn_slowpath_common+0x7f/0xc0 [ 4180.840111] [] ? warn_slowpath_fmt+0x46/0x50 [ 4180.840116] [] ? dev_watchdog+0x2a0/0x2b0 [ 4180.840122] [] ? __queue_work+0xf7/0x3d0 [ 4180.840131] [] ? sched_clock_cpu+0xa8/0x110 [ 4180.840134] [] ? delayed_work_timer_fn+0x0/0x40 [ 4180.840137] [] ? dev_watchdog+0x0/0x2b0 [ 4180.840141] [] ? call_timer_fn+0x44/0x130 [ 4180.840144] [] ? dev_watchdog+0x0/0x2b0 [ 4180.840148] [] ? run_timer_softirq+0x134/0x280 [ 4180.840153] [] ? lapic_next_event+0x1d/0x30 [ 4180.840157] [] ? __do_softirq+0xa8/0x1c0 [ 4180.840161] [] ? tick_program_event+0x1f/0x30 [ 4180.840166] [] ? call_softirq+0x1c/0x30 [ 4180.840169] [] ? do_softirq+0x65/0xa0 [ 4180.840172] [] ? irq_exit+0x85/0x90 [ 4180.840177] [] ? smp_apic_timer_interrupt+0x70/0x9b [ 4180.840180] [] ? apic_timer_interrupt+0x13/0x20 [ 4180.840182] [] ? mwait_idle+0x8d/0x120 [ 4180.840190] [] ? atomic_notifier_call_chain+0x1a/0x20 [ 4180.840195] [] ? cpu_idle+0xa6/0xf0 [ 4180.840199] [] ? start_secondary+0xbc/0xbe [ 4180.840202] ---[ end trace ed69510cc7d5d68f ]--- [ 4180.840209] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [ 4180.840300] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [ 4180.840391] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [ 4180.840437] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [ 4180.840528] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [ 4180.840574] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [ 4180.960955] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [ 4184.087389] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [ 5895.130372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 6698.930022] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [ 6698.930113] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [ 6698.930200] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [ 6698.930246] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [ 6698.930338] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [ 6698.930383] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [ 6699.050975] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [ 6702.093514] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [ 9116.900017] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [ 9116.900102] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [ 9116.900193] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [ 9116.900239] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [ 9116.900331] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [ 9116.900376] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [ 9117.020946] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [ 9120.063930] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [ 9263.170371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [97176.170372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [105179.090153] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [183694.150375] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [185980.190169] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [186057.180379] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [194905.190372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [196483.170370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [196567.090175] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [198011.090371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [199524.190373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [200937.120374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [201830.110374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [202768.140374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [203616.230375] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [204474.290381] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [205353.330371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [206237.160373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [207115.140371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [208003.230372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [208856.170375] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [209689.310369] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [210528.280375] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [211351.160372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [212229.200373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [213077.120374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [213950.280376] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [214828.170382] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [215711.170372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [216574.110370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [217432.180370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [218335.140373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [219128.180370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [220001.130369] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [220874.120371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [221652.160371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [222480.130368] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [223318.160372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [223936.420372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [224625.100373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [225259.090089] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [225573.190371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [226561.120372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [227429.160373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [228372.210371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [229230.200369] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [229843.090372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [229994.900020] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [229994.900106] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [229994.900197] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000007] [229994.900242] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [229994.900334] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [229994.900380] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [229995.020968] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [229998.210270] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [230561.210371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [230918.900023] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [230918.900108] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [230918.900199] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [230918.900245] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [230918.900337] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [230918.900382] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [230919.020974] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [230922.106185] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [231279.150373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [231660.150373] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [231841.900018] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [231841.900104] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [231841.900195] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [231841.900240] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [231841.900332] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [231841.900378] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [231842.020947] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [231845.127457] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [232042.090376] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [232700.160371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [232764.900023] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [232764.900109] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [232764.900200] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [232764.900245] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [232764.900337] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [232764.900383] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [232765.020962] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [232768.148263] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [233428.160374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [233683.900022] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [233683.900107] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [233683.900198] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [233683.900244] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [233683.900336] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [233683.900381] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [233684.020945] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [233687.106149] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [234211.130373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [234606.900018] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [234606.900105] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [234606.900196] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [234606.900241] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [234606.900333] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [234606.900378] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [234607.020952] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [234610.147515] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [235009.150374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [235399.010378] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [235530.900024] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [235530.900109] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [235530.900200] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [235530.900245] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [235530.900337] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [235530.900383] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [235531.020956] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [235534.127169] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [235752.170373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [236453.900017] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [236453.900103] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [236453.900194] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [236453.900239] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [236453.900331] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [236453.900377] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [236454.020944] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [236457.127061] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [236560.180375] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [237376.900022] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [237376.900108] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [237376.900199] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [237376.900244] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [237376.900336] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [237376.900382] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [237377.020955] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [237378.240370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [237380.127032] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [238119.900024] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [238119.900110] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [238119.900201] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [238119.900246] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [238119.900338] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [238119.900384] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [238120.020953] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [238123.105560] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [238251.180371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [238629.520011] eth2: no IPv6 routers present [238862.900024] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [238862.900109] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [238862.900200] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [238862.900245] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [238862.900337] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [238862.900383] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [238863.020947] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [238866.126696] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [239104.120373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [239595.900017] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [239595.900102] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [239595.900194] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [239595.900239] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [239595.900331] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [239595.900376] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [239596.020950] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [239599.126864] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [239957.120370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [240338.900020] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [240338.900105] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [240338.900196] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [240338.900242] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [240338.900334] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [240338.900379] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [240339.020974] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [240342.106780] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [240830.250370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [241071.900017] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [241071.900102] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [241071.900193] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [241071.900238] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [241071.900330] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [241071.900376] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [241072.020945] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [241075.127636] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [241713.110372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [241814.900016] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [241814.900102] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [241814.900193] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [241814.900238] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [241814.900330] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [241814.900376] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [241815.020965] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [241818.232263] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [242716.180373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [242798.900023] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [242798.900107] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [242798.900199] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [242798.900244] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [242798.900336] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [242798.900381] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [242799.020968] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [242802.126697] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [243754.140373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [244997.180374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [246110.100374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [246491.900022] bnx2 0000:09:00.0: eth1: DEBUG: intr_sem[0] PCI_CMD[02b0055e] [246491.900107] bnx2 0000:09:00.0: eth1: DEBUG: PCI_PM[1d002000] PCI_MISC_CFG[81020088] [246491.900199] bnx2 0000:09:00.0: eth1: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003] [246491.900244] bnx2 0000:09:00.0: eth1: DEBUG: RPM_MGMT_PKT_CTRL[00000000] [246491.900336] bnx2 0000:09:00.0: eth1: DEBUG: MCP_STATE_P0[00000106] MCP_STATE_P1[dbfff7ea] [246491.900381] bnx2 0000:09:00.0: eth1: DEBUG: HC_STATS_INTERRUPT_STATUS[00000000] [246492.020974] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [246495.211522] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [247258.130375] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [248259.480009] eth1: no IPv6 routers present [248466.170371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [249634.230370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [250752.180373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [251900.100373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [253093.280370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [254306.120374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [255569.160374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [256842.240372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [257910.210373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [259013.160373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [260151.310370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [261255.120372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [262413.150373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [265366.300368] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [267670.160371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [273274.120009] eth3: no IPv6 routers present [279308.170373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [281966.080167] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [290741.140371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [302744.310370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [314093.140371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [314851.210369] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [315044.190371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [315322.160372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [315980.170372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [316958.120376] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [318301.190372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [319669.210371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [321012.110376] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [331695.350370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [341594.180373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [347107.090074] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [489567.492314] bnx2 0000:05:00.0: eth3: NIC Copper Link is Down [489567.500120] e1000: eth0 NIC Link is Down [489574.390111] e1000: eth2 NIC Link is Down [489574.390982] bnx2 0000:09:00.0: eth1: NIC Copper Link is Down [489583.240371] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [489583.316457] bnx2 0000:05:00.0: eth3: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [489596.110373] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [489596.399003] bnx2 0000:09:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [492491.090152] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [646071.090122] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [669418.080098] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [707842.080162] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [893619.636005] audit_printk_skb: 36 callbacks suppressed [893619.636009] type=1400 audit(1313555925.113:24): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=12194 comm="apparmor_parser" [893619.636159] type=1400 audit(1313555925.113:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=12194 comm="apparmor_parser" [893619.636257] type=1400 audit(1313555925.113:26): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=12194 comm="apparmor_parser" [1092791.850019] usb 3-1: new full speed USB device using uhci_hcd and address 22 [1092792.039110] hub 3-1:1.0: USB hub found [1092792.041056] hub 3-1:1.0: 4 ports detected [1092792.321051] usb 3-1.3: new full speed USB device using uhci_hcd and address 23 [1092792.466093] hub 3-1.3:1.0: USB hub found [1092792.467219] hub 3-1.3:1.0: 3 ports detected [1092792.751049] usb 3-1.3.1: new full speed USB device using uhci_hcd and address 24 [1092792.990185] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/input/input18 [1092792.990426] generic-usb 0003:413C:2010.0012: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input0 [1092792.998314] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/input/input19 [1092792.998598] generic-usb 0003:413C:2010.0013: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input1 [1092793.092055] usb 3-1.3.2: new low speed USB device using uhci_hcd and address 25 [1092793.265443] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input20 [1092793.265711] generic-usb 0003:045E:0039.0014: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3.2/input0 [1092858.790056] usb 3-1: USB disconnect, address 22 [1092858.790062] usb 3-1.3: USB disconnect, address 23 [1092858.790065] usb 3-1.3.1: USB disconnect, address 24 [1092859.210166] usb 3-1.3.2: USB disconnect, address 25 [1093204.830019] usb 3-1: new full speed USB device using uhci_hcd and address 26 [1093205.019112] hub 3-1:1.0: USB hub found [1093205.021070] hub 3-1:1.0: 4 ports detected [1093205.301055] usb 3-1.3: new full speed USB device using uhci_hcd and address 27 [1093205.446101] hub 3-1.3:1.0: USB hub found [1093205.447113] hub 3-1.3:1.0: 3 ports detected [1093205.731054] usb 3-1.3.1: new full speed USB device using uhci_hcd and address 28 [1093205.960179] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/input/input21 [1093205.960374] generic-usb 0003:413C:2010.0015: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input0 [1093205.968172] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/input/input22 [1093205.968374] generic-usb 0003:413C:2010.0016: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input1 [1093206.061057] usb 3-1.3.2: new low speed USB device using uhci_hcd and address 29 [1093206.224329] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input23 [1093206.224593] generic-usb 0003:045E:0039.0017: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3.2/input0 [1093212.540050] usb 3-1: USB disconnect, address 26 [1093212.540056] usb 3-1.3: USB disconnect, address 27 [1093212.540059] usb 3-1.3.1: USB disconnect, address 28 [1093212.890173] usb 3-1.3.2: USB disconnect, address 29 [1093618.130163] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [1267277.130112] usb 1-1.2: reset high speed USB device using ehci_hcd and address 5 [1374640.680024] usb 3-1: new full speed USB device using uhci_hcd and address 30 [1374640.869107] hub 3-1:1.0: USB hub found [1374640.871051] hub 3-1:1.0: 4 ports detected [1374641.161043] usb 3-1.3: new full speed USB device using uhci_hcd and address 31 [1374641.305089] hub 3-1.3:1.0: USB hub found [1374641.306234] hub 3-1.3:1.0: 3 ports detected [1374641.601045] usb 3-1.3.1: new full speed USB device using uhci_hcd and address 32 [1374641.840176] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/input/input24 [1374641.840382] generic-usb 0003:413C:2010.0018: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input0 [1374641.848166] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/input/input25 [1374641.848407] generic-usb 0003:413C:2010.0019: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input1 [1374641.932049] usb 3-1.3.2: new low speed USB device using uhci_hcd and address 33 [1374642.094318] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input26 [1374642.094569] generic-usb 0003:045E:0039.001A: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3.2/input0 [1374817.790050] usb 3-1: USB disconnect, address 30 [1374817.790056] usb 3-1.3: USB disconnect, address 31 [1374817.790059] usb 3-1.3.1: USB disconnect, address 32 [1374818.140173] usb 3-1.3.2: USB disconnect, address 33 [1375115.230024] usb 3-1: new full speed USB device using uhci_hcd and address 34 [1375115.419114] hub 3-1:1.0: USB hub found [1375115.421061] hub 3-1:1.0: 4 ports detected [1375115.701054] usb 3-1.3: new full speed USB device using uhci_hcd and address 35 [1375115.846094] hub 3-1.3:1.0: USB hub found [1375115.847470] hub 3-1.3:1.0: 3 ports detected [1375116.131054] usb 3-1.3.1: new full speed USB device using uhci_hcd and address 36 [1375116.380156] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/input/input27 [1375116.380351] generic-usb 0003:413C:2010.001B: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input0 [1375116.388169] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/input/input28 [1375116.388381] generic-usb 0003:413C:2010.001C: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input1 [1375116.471058] usb 3-1.3.2: new low speed USB device using uhci_hcd and address 37 [1375116.644323] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input29 [1375116.644578] generic-usb 0003:045E:0039.001D: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3.2/input0 [1375962.040050] usb 3-1: USB disconnect, address 34 [1375962.040055] usb 3-1.3: USB disconnect, address 35 [1375962.040058] usb 3-1.3.1: USB disconnect, address 36 [1375962.460163] usb 3-1.3.2: USB disconnect, address 37 [1377977.060040] usb 3-1: new full speed USB device using uhci_hcd and address 38 [1377977.309108] hub 3-1:1.0: USB hub found [1377977.311057] hub 3-1:1.0: 4 ports detected [1377977.591049] usb 3-1.3: new full speed USB device using uhci_hcd and address 39 [1377977.736092] hub 3-1.3:1.0: USB hub found [1377977.737254] hub 3-1.3:1.0: 3 ports detected [1377978.021052] usb 3-1.3.1: new full speed USB device using uhci_hcd and address 40 [1377978.250175] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/input/input30 [1377978.250374] generic-usb 0003:413C:2010.001E: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input0 [1377978.258180] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/input/input31 [1377978.258384] generic-usb 0003:413C:2010.001F: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.3.1/input1 [1377978.341053] usb 3-1.3.2: new low speed USB device using uhci_hcd and address 41 [1377978.503333] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input32 [1377978.503601] generic-usb 0003:045E:0039.0020: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3.2/input0