[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-34-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #77-Ubuntu SMP Tue Sep 13 19:40:53 UTC 2011 (Ubuntu 2.6.32-34.77-generic 2.6.32.44+drm33.19) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6c00 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000040fd800 (usable) [ 0.000000] BIOS-e820: 00000000040fd800 - 00000000040ff800 (ACPI data) [ 0.000000] BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000040ffc00 - 0000000010000000 (usable) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.1 present. [ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6c00 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000040fd800 (usable) [ 0.000000] modified: 00000000040fd800 - 00000000040ff800 (ACPI data) [ 0.000000] modified: 00000000040ff800 - 00000000040ffc00 (ACPI NVS) [ 0.000000] modified: 00000000040ffc00 - 0000000010000000 (usable) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0010000000 page 2M [ 0.000000] kernel direct mapping tables up to 10000000 @ 7000-b000 [ 0.000000] RAMDISK: 0394c000 - 040ec9d9 [ 0.000000] ACPI: RSDP 000f6bb0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 040fdbcb 00028 (v01 PTLTD RSDT 00000001 PTL 01000000) [ 0.000000] ACPI: FACP 040ff78c 00074 (v01 DELL KUBLAI 20000322 PTL 000F4240) [ 0.000000] ACPI: DSDT 040fdbf3 01B99 (v01 Intel S2440BX 00000001 MSFT 01000004) [ 0.000000] ACPI: FACS 040ffbc0 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 256MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 10000000 [ 0.000000] low ram: 0 - 10000000 [ 0.000000] node 0 low ram: 00000000 - 10000000 [ 0.000000] node 0 bootmap 00007000 - 00009000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0010000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e0ed8] TEXT DATA BSS ==> [0000100000 - 00008e0ed8] [ 0.000000] #4 [000394c000 - 00040ec9d9] RAMDISK ==> [000394c000 - 00040ec9d9] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008e1000 - 00008e4124] BRK ==> [00008e1000 - 00008e4124] [ 0.000000] #7 [0000007000 - 0000009000] BOOTMAP ==> [0000007000 - 0000009000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00010000 [ 0.000000] HighMem 0x00010000 -> 0x00010000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000040fd [ 0.000000] 0: 0x00004100 -> 0x00010000 [ 0.000000] On node 0 totalpages: 65432 [ 0.000000] free_area_init_node: node 0, pgdat c079a800, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 60957 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000 [ 0.000000] PM: Registered nosave memory: 00000000000e7000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000040fd000 - 00000000040fe000 [ 0.000000] PM: Registered nosave memory: 00000000040fe000 - 00000000040ff000 [ 0.000000] PM: Registered nosave memory: 00000000040ff000 - 0000000004100000 [ 0.000000] PM: Registered nosave memory: 00000000040ff000 - 0000000004100000 [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36312 r0 d21032 u4194304 [ 0.000000] pcpu-alloc: s36312 r0 d21032 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64920 [ 0.000000] Kernel command line: root=UUID=a7d0409d-4609-45fe-ae7c-f9ca06c894c8 ro quiet splash [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1310720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 241852k/262144k available (4679k kernel code, 19524k reserved, 2124k data, 668k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084c000 ( 668 kB) [ 0.000000] .data : 0xc0591c47 - 0xc07a4dc8 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591c47 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 798.131 MHz processor. [ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1596.26 BogoMIPS (lpj=3192524) [ 0.008066] Security Framework initialized [ 0.008146] AppArmor: AppArmor initialized [ 0.008171] Mount-cache hash table entries: 512 [ 0.008551] Initializing cgroup subsys ns [ 0.008564] Initializing cgroup subsys cpuacct [ 0.008578] Initializing cgroup subsys memory [ 0.008605] Initializing cgroup subsys devices [ 0.008614] Initializing cgroup subsys freezer [ 0.008622] Initializing cgroup subsys net_cls [ 0.008685] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.008695] CPU: L2 cache: 256K [ 0.008708] mce: CPU supports 5 MCE banks [ 0.008755] Performance Events: [ 0.008763] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.008770] no hardware sampling interrupt available. [ 0.008777] p6 PMU driver. [ 0.008836] ... version: 0 [ 0.008842] ... bit width: 32 [ 0.008849] ... generic registers: 2 [ 0.008856] ... value mask: 00000000ffffffff [ 0.008864] ... max period: 000000007fffffff [ 0.008871] ... fixed-purpose events: 0 [ 0.008878] ... event mask: 0000000000000003 [ 0.008890] Checking 'hlt' instruction... OK. [ 0.025497] SMP alternatives: switching to UP code [ 0.041154] Freeing SMP alternatives: 19k freed [ 0.041220] ACPI: Core revision 20090903 [ 0.046375] ACPI: setting ELCR to 0200 (from 0e08) [ 0.047641] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.047659] ftrace: allocating 21731 entries in 43 pages [ 0.052329] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.052348] weird, boot CPU (#0) not listed by the BIOS. [ 0.052356] SMP motherboard not detected. [ 0.052365] Local APIC not detected. Using dummy APIC emulation. [ 0.052371] SMP disabled [ 0.053148] Brought up 1 CPUs [ 0.053166] Total of 1 processors activated (1596.26 BogoMIPS). [ 0.053227] CPU0 attaching NULL sched-domain. [ 0.053890] devtmpfs: initialized [ 0.056711] regulator: core version 0.5 [ 0.056755] Time: 14:00:15 Date: 10/02/11 [ 0.056945] NET: Registered protocol family 16 [ 0.057351] EISA bus registered [ 0.057390] ACPI: bus type pci registered [ 0.058049] PCI: PCI BIOS revision 2.10 entry at 0xfd993, last bus=1 [ 0.058057] PCI: Using configuration type 1 for base access [ 0.061323] bio: create slab at 0 [ 0.062237] ACPI: EC: Look up EC in DSDT [ 0.067186] ACPI: Interpreter enabled [ 0.067202] ACPI: (supports S0 S1 S5) [ 0.067250] ACPI: Using PIC for interrupt routing [ 0.074147] ACPI: Power Resource [PFAN] (on) [ 0.074374] ACPI: No dock devices found. [ 0.077069] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.077190] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd4000000-0xd7ffffff] [ 0.077398] pci 0000:00:07.1: reg 20 io port: [0x1840-0x184f] [ 0.077475] pci 0000:00:07.2: reg 20 io port: [0x1800-0x181f] [ 0.077520] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, [ 0.077525] * this clock source is slow. Consider trying other clock sources [ 0.077582] pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI [ 0.077593] pci 0000:00:07.3: quirk: region 7000-700f claimed by PIIX4 SMB [ 0.077671] pci 0000:00:0d.0: reg 10 32bit mmio: [0xd0000000-0xd000ffff] [ 0.077685] pci 0000:00:0d.0: reg 14 io port: [0x1850-0x1857] [ 0.077734] pci 0000:00:0d.0: PME# supported from D0 D3hot [ 0.077744] pci 0000:00:0d.0: PME# disabled [ 0.077793] pci 0000:00:0e.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.077807] pci 0000:00:0e.0: reg 14 io port: [0x1000-0x10ff] [ 0.077821] pci 0000:00:0e.0: reg 18 32bit mmio: [0xd0010000-0xd001ffff] [ 0.077849] pci 0000:00:0e.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.077875] pci 0000:00:0e.0: supports D1 D2 [ 0.077924] pci 0000:00:10.0: reg 10 io port: [0x1820-0x183f] [ 0.077977] pci 0000:00:10.0: supports D1 D2 [ 0.078023] pci 0000:00:10.1: reg 10 io port: [0x1858-0x185f] [ 0.078075] pci 0000:00:10.1: supports D1 D2 [ 0.078131] pci 0000:00:11.0: reg 10 io port: [0x1400-0x14ff] [ 0.078144] pci 0000:00:11.0: reg 14 32bit mmio: [0xd0020000-0xd00200ff] [ 0.078193] pci 0000:00:11.0: supports D1 D2 [ 0.078201] pci 0000:00:11.0: PME# supported from D1 D2 D3hot D3cold [ 0.078211] pci 0000:00:11.0: PME# disabled [ 0.078306] pci_bus 0000:00: on NUMA node 0 [ 0.078319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.080510] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12) [ 0.080763] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.081013] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) [ 0.081264] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12) [ 0.081587] vgaarb: device added: PCI:0000:00:0e.0,decodes=io+mem,owns=io+mem,locks=none [ 0.081601] vgaarb: loaded [ 0.082004] SCSI subsystem initialized [ 0.082246] libata version 3.00 loaded. [ 0.082488] usbcore: registered new interface driver usbfs [ 0.082529] usbcore: registered new interface driver hub [ 0.082640] usbcore: registered new device driver usb [ 0.083091] ACPI: WMI: Mapper loaded [ 0.083098] PCI: Using ACPI for IRQ routing [ 0.083192] Expanded resource reserved due to conflict with Adapter ROM [ 0.083466] NetLabel: Initializing [ 0.083474] NetLabel: domain hash size = 128 [ 0.083479] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.083521] NetLabel: unlabeled traffic allowed by default [ 0.083653] Switching to clocksource tsc [ 0.086491] AppArmor: AppArmor Filesystem Enabled [ 0.086568] pnp: PnP ACPI init [ 0.086629] ACPI: bus type pnp registered [ 0.096081] pnp: PnP ACPI: found 11 devices [ 0.096091] ACPI: ACPI bus type pnp unregistered [ 0.096103] PnPBIOS: Disabled by ACPI PNP [ 0.096142] system 00:01: ioport range 0x7000-0x700f has been reserved [ 0.096152] system 00:01: ioport range 0x8000-0x803f has been reserved [ 0.096165] system 00:01: iomem range 0xfff80000-0xffffffff has been reserved [ 0.131407] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.131417] pci 0000:00:01.0: IO window: disabled [ 0.131428] pci 0000:00:01.0: MEM window: disabled [ 0.131437] pci 0000:00:01.0: PREFETCH window: disabled [ 0.131467] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.131476] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.131595] NET: Registered protocol family 2 [ 0.131918] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.132946] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.133148] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.133340] TCP: Hash tables configured (established 8192 bind 8192) [ 0.133348] TCP reno registered [ 0.133627] NET: Registered protocol family 1 [ 0.133684] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.133740] pci 0000:00:0e.0: Boot video device [ 0.134232] cpufreq-nforce2: No nForce2 chipset. [ 0.134304] Scanning for low memory corruption every 60 seconds [ 0.134750] audit: initializing netlink socket (disabled) [ 0.134786] type=2000 audit(1317564014.132:1): initialized [ 0.162860] Trying to unpack rootfs image as initramfs... [ 0.193066] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.203894] VFS: Disk quotas dquot_6.5.2 [ 0.204144] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.208886] fuse init (API version 7.13) [ 0.209281] msgmni has been set to 473 [ 0.217205] alg: No test for stdrng (krng) [ 0.217440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.217451] io scheduler noop registered [ 0.217457] io scheduler anticipatory registered [ 0.217464] io scheduler deadline registered [ 0.217636] io scheduler cfq registered (default) [ 0.217951] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.218039] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.218324] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.218337] ACPI: Power Button [PWRF] [ 0.218772] fan PNP0C0B:00: registered as cooling_device0 [ 0.218792] ACPI: Fan [FAN1] (on) [ 0.218982] Marking TSC unstable due to TSC halts in idle [ 0.219207] processor LNXCPU:00: registered as cooling_device1 [ 0.222524] Switching to clocksource acpi_pm [ 0.222622] isapnp: Scanning for PnP cards... [ 0.281142] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.281322] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.282232] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.290865] brd: module loaded [ 0.297693] loop: module loaded [ 0.298077] input: Macintosh mouse button emulation as /devices/virtual/input/input1 [ 0.298456] ata_piix 0000:00:07.1: version 2.13 [ 0.298898] scsi0 : ata_piix [ 0.299224] scsi1 : ata_piix [ 0.299329] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1840 irq 14 [ 0.299339] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1848 irq 15 [ 0.300568] Fixed MDIO Bus: probed [ 0.300690] PPP generic driver version 2.4.2 [ 0.300900] tun: Universal TUN/TAP device driver, 1.6 [ 0.300908] tun: (C) 1999-2004 Max Krasnyansky [ 0.301194] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.301254] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.301295] uhci_hcd: USB Universal Host Controller Interface driver [ 0.301941] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 0.301951] PCI: setting IRQ 9 as level-triggered [ 0.301963] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 0.301985] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 0.302172] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 0.302225] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001800 [ 0.302580] usb usb1: configuration #1 chosen from 1 choice [ 0.302674] hub 1-0:1.0: USB hub found [ 0.302705] hub 1-0:1.0: 2 ports detected [ 0.302995] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MICE] at 0x60,0x64 irq 1,12 [ 0.313743] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.313782] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.314304] mice: PS/2 mouse device common for all mice [ 0.314784] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.314821] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.315176] device-mapper: uevent: version 1.0.3 [ 0.315636] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.318603] device-mapper: multipath: version 1.1.0 loaded [ 0.318618] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.320640] EISA: Probing bus 0 at eisa.0 [ 0.320659] Cannot allocate resource for EISA slot 1 [ 0.320693] Cannot allocate resource for EISA slot 7 [ 0.320700] Cannot allocate resource for EISA slot 8 [ 0.320706] EISA: Detected 0 cards. [ 0.324774] cpuidle: using governor ladder [ 0.324916] cpuidle: using governor menu [ 0.326459] TCP cubic registered [ 0.327022] NET: Registered protocol family 10 [ 0.329897] NET: Registered protocol family 17 [ 0.330082] Using IPI No-Shortcut mode [ 0.330397] PM: Resume from disk failed. [ 0.330436] registered taskstats version 1 [ 0.330804] Magic number: 15:618:29 [ 0.330956] rtc_cmos 00:03: setting system clock to 2011-10-02 14:00:15 UTC (1317564015) [ 0.330967] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.330973] EDD information not available. [ 0.340506] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.490030] ata1.00: ATA-5: QUANTUM FIREBALLP LM30.0, A35.0700, max UDMA/66 [ 0.490044] ata1.00: 58633344 sectors, multi 16: LBA [ 0.496696] ata2.00: ATAPI: _NEC DV-5700A, 1.05, max UDMA/33 [ 0.496800] ata2.01: ATAPI: SONY CD-RW CRX140E, 1.0n, max UDMA/33 [ 0.505335] ata2.00: configured for UDMA/33 [ 0.505593] ata1.00: configured for UDMA/33 [ 0.520461] ata2.01: configured for UDMA/33 [ 0.660125] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 0.868902] usb 1-1: configuration #1 chosen from 1 choice [ 0.870505] hub 1-1:1.0: USB hub found [ 0.873063] hub 1-1:1.0: 4 ports detected [ 0.922828] isapnp: No Plug & Play device found [ 0.923260] scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL A35. PQ: 0 ANSI: 5 [ 0.923755] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.924307] sd 0:0:0:0: [sda] 58633344 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 0.924476] sd 0:0:0:0: [sda] Write Protect is off [ 0.924487] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.924575] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.925052] sda: [ 0.926887] scsi 1:0:0:0: CD-ROM _NEC DV-5700A 1.05 PQ: 0 ANSI: 5 [ 0.932418] sr0: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray [ 0.932433] Uniform CD-ROM driver Revision: 3.20 [ 0.932837] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.933052] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 0.937649] scsi 1:0:1:0: CD-ROM SONY CD-RW CRX140E 1.0n PQ: 0 ANSI: 5 [ 0.944794] sda1 sda2 [ 0.981882] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.988410] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 1.148617] usb 1-2: configuration #1 chosen from 1 choice [ 1.259879] Freeing initrd memory: 7810k freed [ 1.303548] Freeing unused kernel memory: 668k freed [ 1.307440] Write protecting the kernel text: 4680k [ 1.307552] Write protecting the kernel read-only data: 1844k [ 1.375192] udev: starting version 151 [ 1.921722] Floppy drive(s): fd0 is 1.44M [ 1.940156] FDC 0 is a post-1991 82077 [ 2.018755] 8139too Fast Ethernet driver 0.9.28 [ 2.019347] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 2.019356] PCI: setting IRQ 10 as level-triggered [ 2.019369] 8139too 0000:00:11.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 2.022072] eth0: RealTek RTL8139 at 0x1400, 00:11:95:65:87:5e, IRQ 10 [ 2.386817] kjournald starting. Commit interval 5 seconds [ 2.386857] EXT3-fs: mounted filesystem with ordered data mode. [ 5.729816] Adding 746980k swap on /dev/sda6. Priority:-1 extents:1 across:746980k [ 6.456468] EXT3 FS on sda5, internal journal [ 7.135974] udev: starting version 151 [ 9.822775] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.073638] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x7000, revision 0 [ 10.946229] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 11.058750] Linux agpgart interface v0.103 [ 11.215910] psmouse serio1: ID: 10 00 64 [ 11.420728] input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3 [ 11.790551] [drm] Initialized drm 1.1.0 20060810 [ 12.077471] parport_pc 00:08: reported by Plug and Play ACPI [ 12.077547] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 12.185682] lp0: using parport0 (interrupt-driven). [ 12.197681] agpgart-intel 0000:00:00.0: Intel 440BX Chipset [ 12.273325] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xd4000000 [ 12.285012] gameport: EMU10K1 is pci0000:00:10.1/gameport0, io 0x1858, speed 1269kHz [ 12.356274] dell-wmi: No known WMI GUID found [ 12.390300] ppdev: user-space parallel port driver [ 12.663125] [drm] radeon defaulting to kernel modesetting. [ 12.663139] [drm] radeon kernel modesetting enabled. [ 12.663764] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 12.663774] PCI: setting IRQ 11 as level-triggered [ 12.663786] radeon 0000:00:0e.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 12.680626] [drm] radeon: Initializing kernel modesetting. [ 12.680831] [drm] register mmio base: 0xD0010000 [ 12.680838] [drm] register mmio size: 65536 [ 12.681551] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 12.681607] [drm] Generation 2 PCI interface, using max accessible memory [ 12.681617] [drm] radeon: VRAM 128M [ 12.681624] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 12.681630] [drm] radeon: GTT 512M [ 12.681637] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [ 12.681710] [drm] radeon: irq initialized. [ 12.682015] [drm] Detected VRAM RAM=128M, BAR=256M [ 12.682029] [drm] RAM width 64bits DDR [ 12.682651] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x132B pid 0x2001 [ 12.682715] usbcore: registered new interface driver usblp [ 12.691022] [TTM] Zone kernel: Available graphics memory: 125350 kiB. [ 12.691097] [drm] radeon: 128M of VRAM memory ready [ 12.691105] [drm] radeon: 512M of GTT memory ready. [ 12.691162] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 12.722010] [drm] radeon: cp idle (0x02000603) [ 12.722527] [drm] Loading R200 Microcode [ 12.723804] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 13.112934] [drm] radeon: ring at 0x0000000020000000 [ 13.112965] [drm] ring test succeeded in 0 usecs [ 13.113331] [drm] radeon: ib pool ready. [ 13.113565] [drm] ib test succeeded in 0 usecs [ 13.113861] [drm] Default TV standard: PAL [ 13.113868] [drm] 27.000000000 MHz TV ref clk [ 13.113878] [drm] DFP table revision: 4 [ 13.114037] [drm] Default TV standard: PAL [ 13.114043] [drm] 27.000000000 MHz TV ref clk [ 13.114135] [drm] Radeon Display Connectors [ 13.114142] [drm] Connector 0: [ 13.114148] [drm] VGA [ 13.114157] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 13.114163] [drm] Encoders: [ 13.114169] [drm] CRT1: INTERNAL_DAC1 [ 13.114175] [drm] Connector 1: [ 13.114180] [drm] DVI-I [ 13.114185] [drm] HPD1 [ 13.114193] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 13.114199] [drm] Encoders: [ 13.114205] [drm] CRT2: INTERNAL_DAC2 [ 13.114211] [drm] DFP1: INTERNAL_TMDS1 [ 13.114216] [drm] Connector 2: [ 13.114222] [drm] S-video [ 13.114226] [drm] Encoders: [ 13.114232] [drm] TV1: INTERNAL_DAC2 [ 13.214284] type=1505 audit(1317578428.381:2): operation="profile_load" pid=421 name="/sbin/dhclient3" [ 13.215729] type=1505 audit(1317578428.381:3): operation="profile_load" pid=421 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.216752] type=1505 audit(1317578428.385:4): operation="profile_replace" pid=425 name="/sbin/dhclient3" [ 13.218228] type=1505 audit(1317578428.385:5): operation="profile_replace" pid=425 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.219072] type=1505 audit(1317578428.385:6): operation="profile_load" pid=425 name="/usr/lib/connman/scripts/dhclient-script" [ 13.220968] type=1505 audit(1317578428.389:7): operation="profile_replace" pid=421 name="/usr/lib/connman/scripts/dhclient-script" [ 13.377991] [drm] fb mappable at 0xE0040000 [ 13.378001] [drm] vram apper at 0xE0000000 [ 13.378007] [drm] size 5242880 [ 13.378013] [drm] fb depth is 24 [ 13.378018] [drm] pitch is 5120 [ 13.379461] fb0: radeondrmfb frame buffer device [ 13.379471] registered panic notifier [ 13.379491] [drm] Initialized radeon 2.0.0 20080528 for 0000:00:0e.0 on minor 0 [ 13.656923] vga16fb: initializing [ 13.656944] vga16fb: mapped to 0xc00a0000 [ 13.656961] vga16fb: not registering due to another framebuffer present [ 14.640261] Console: switching to colour frame buffer device 160x64 [ 18.007566] EMU10K1_Audigy 0000:00:10.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 22.207557] type=1505 audit(1317578437.376:8): operation="profile_load" pid=628 name="/usr/share/gdm/guest-session/Xsession" [ 22.217584] type=1505 audit(1317578437.385:9): operation="profile_replace" pid=629 name="/sbin/dhclient3" [ 22.219129] type=1505 audit(1317578437.385:10): operation="profile_replace" pid=629 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.220140] type=1505 audit(1317578437.385:11): operation="profile_replace" pid=629 name="/usr/lib/connman/scripts/dhclient-script" [ 22.443964] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 24.265229] type=1505 audit(1317578439.433:12): operation="profile_load" pid=630 name="/usr/bin/evince" [ 24.288287] type=1505 audit(1317578439.457:13): operation="profile_load" pid=630 name="/usr/bin/evince-previewer" [ 24.302351] type=1505 audit(1317578439.469:14): operation="profile_load" pid=630 name="/usr/bin/evince-thumbnailer" [ 32.928055] eth0: no IPv6 routers present [ 33.201803] type=1505 audit(1317578333.930:15): operation="profile_load" pid=706 name="/usr/lib/firefox-3.6.23/firefox-*bin" [ 33.217237] type=1505 audit(1317578333.946:16): operation="profile_load" pid=706 name="/usr/lib/firefox-3.6.23/firefox-*bin//firefox_java" [ 33.219846] type=1505 audit(1317578333.946:17): operation="profile_load" pid=706 name="/usr/lib/firefox-3.6.23/firefox-*bin//firefox_openjdk" [ 33.286856] type=1505 audit(1317578334.014:18): operation="profile_load" pid=803 name="/usr/lib/cups/backend/cups-pdf" [ 33.289538] type=1505 audit(1317578334.018:19): operation="profile_load" pid=803 name="/usr/sbin/cupsd" [ 33.347175] type=1505 audit(1317578334.076:20): operation="profile_load" pid=804 name="/usr/sbin/tcpdump" [ 36.190571] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 36.190582] apm: overridden by ACPI. [ 55.048401] usb 1-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 94.519995] type=1503 audit(1317578395.249:21): operation="open" pid=1154 parent=1152 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [30934.876715] type=1503 audit(1317609235.606:22): operation="open" pid=1258 parent=1256 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [228759.532933] eth0: link down [228763.481770] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [228866.584366] eth0: link down [228870.543731] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [228974.332259] eth0: link down [228978.287307] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [725312.903937] eth0: link down [725316.902850] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [1123064.448132] usb 1-2: USB disconnect, address 3 [1123064.448506] usblp0: removed [1123072.624084] usb 1-2: new full speed USB device using uhci_hcd and address 4 [1123072.841846] usb 1-2: configuration #1 chosen from 1 choice [1123072.848529] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x132B pid 0x2001 [1123074.073635] usb 1-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [1124256.497695] type=1503 audit(1318702548.383:23): operation="open" pid=6661 parent=6659 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1124636.348075] usblp0: nonzero write bulk status received: -71 [1124636.520149] usb 1-2: USB disconnect, address 4 [1124636.520491] usblp0: removed [1124640.232090] usb 1-2: new full speed USB device using uhci_hcd and address 5 [1124640.389063] usb 1-2: configuration #1 chosen from 1 choice [1124640.396729] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x132B pid 0x2001 [1124641.701071] usb 1-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [1124660.259277] type=1503 audit(1318702952.142:24): operation="open" pid=6756 parent=6754 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1125472.930365] type=1503 audit(1318703764.814:25): operation="open" pid=6830 parent=6828 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1134676.502284] eth0: link down [1134680.445121] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [1188425.771199] type=1503 audit(1318766717.654:26): operation="open" pid=7280 parent=7278 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1273092.630756] type=1503 audit(1318851384.514:27): operation="open" pid=7790 parent=7788 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1360019.324151] type=1503 audit(1318938311.210:28): operation="open" pid=8325 parent=8323 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1446735.228965] type=1503 audit(1319025027.114:29): operation="open" pid=8860 parent=8858 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1505122.231703] usblp0: nonzero write bulk status received: -71 [1505122.336154] usb 1-2: USB disconnect, address 5 [1505122.336497] usblp0: removed [1505752.496146] usb 1-2: new full speed USB device using uhci_hcd and address 6 [1505752.658032] usb 1-2: configuration #1 chosen from 1 choice [1505752.665698] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x132B pid 0x2001 [1505754.737161] usb 1-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [1505777.999927] type=1503 audit(1319084069.882:30): operation="open" pid=9181 parent=9179 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1506059.443805] type=1503 audit(1319084351.326:31): operation="open" pid=9367 parent=9365 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1532993.346384] type=1503 audit(1319111237.765:32): operation="open" pid=9909 parent=9907 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1620217.175422] type=1503 audit(1319198461.594:33): operation="open" pid=10300 parent=10298 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1705431.525217] type=1503 audit(1319283675.944:34): operation="open" pid=10670 parent=10668 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1739515.557900] eth0: link down [1739519.520949] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [1792633.107481] type=1503 audit(1319370877.526:35): operation="open" pid=11056 parent=11054 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1836689.904126] usb 1-1: USB disconnect, address 2 [1878591.375925] type=1503 audit(1319456835.795:36): operation="open" pid=12247 parent=12245 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [1965878.796881] type=1503 audit(1319544123.216:37): operation="open" pid=12784 parent=12782 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2051196.908340] type=1503 audit(1319629441.328:38): operation="open" pid=13315 parent=13313 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2138424.351748] type=1503 audit(1319716668.768:39): operation="open" pid=13824 parent=13822 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2225916.406491] type=1503 audit(1319804160.824:40): operation="open" pid=14384 parent=14382 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2311308.630194] type=1503 audit(1319889553.049:41): operation="open" pid=14915 parent=14913 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2334056.234864] eth0: link down [2334060.173156] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [2334164.266384] eth0: link down [2334168.231262] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [2334274.589036] eth0: link down [2334278.543876] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [2397571.603085] type=1503 audit(1319975816.020:42): operation="open" pid=15440 parent=15438 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2484442.973758] type=1503 audit(1320062687.392:43): operation="open" pid=15957 parent=15955 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2570943.960330] type=1503 audit(1320149188.380:44): operation="open" pid=16482 parent=16480 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2656765.163001] type=1503 audit(1320235009.582:45): operation="open" pid=17006 parent=17004 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2743580.241434] type=1503 audit(1320321824.660:46): operation="open" pid=17550 parent=17548 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2829336.025479] type=1503 audit(1320407580.444:47): operation="open" pid=18065 parent=18063 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2915870.580078] type=1503 audit(1320494114.999:48): operation="open" pid=18581 parent=18579 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [2917532.794427] eth0: link down [2917536.734249] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [3005631.585173] type=1503 audit(1320583876.004:49): operation="open" pid=19119 parent=19117 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3092483.646900] type=1503 audit(1320670728.064:50): operation="open" pid=19653 parent=19651 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3178219.654702] type=1503 audit(1320756464.072:51): operation="open" pid=20089 parent=20087 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3264648.584392] type=1503 audit(1320842893.004:52): operation="open" pid=20478 parent=20476 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3351304.393852] type=1503 audit(1320929548.813:53): operation="open" pid=20883 parent=20881 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3437945.472449] type=1503 audit(1321016189.892:54): operation="open" pid=21280 parent=21278 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3522432.780197] eth0: link down [3522436.756722] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [3524417.691314] type=1503 audit(1321102662.110:55): operation="open" pid=21672 parent=21670 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3609748.102964] type=1503 audit(1321187992.520:56): operation="open" pid=22052 parent=22050 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3697690.021794] type=1503 audit(1321275934.441:57): operation="open" pid=22434 parent=22432 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3782636.816134] type=1503 audit(1321360881.236:58): operation="open" pid=22827 parent=22825 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3869940.568331] type=1503 audit(1321448184.988:59): operation="open" pid=23199 parent=23197 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3893527.252904] usblp0: nonzero write bulk status received: -71 [3893527.256335] usb 1-2: USB disconnect, address 6 [3893527.256674] usblp0: removed [3893540.500073] usb 1-2: new full speed USB device using uhci_hcd and address 7 [3893540.661756] usb 1-2: configuration #1 chosen from 1 choice [3893540.668469] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x132B pid 0x2001 [3893542.201481] usb 1-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [3893559.441742] type=1503 audit(1321471803.860:60): operation="open" pid=23367 parent=23365 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3893606.112131] usb 1-1: new full speed USB device using uhci_hcd and address 8 [3893606.260461] usb 1-1: configuration #1 chosen from 1 choice [3893606.262336] hub 1-1:1.0: USB hub found [3893606.264336] hub 1-1:1.0: 4 ports detected [3893698.579776] type=1503 audit(1321471942.996:61): operation="open" pid=23438 parent=23436 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3893840.869035] type=1503 audit(1321472085.288:62): operation="open" pid=23830 parent=23828 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3894011.716558] type=1503 audit(1321472256.136:63): operation="open" pid=23916 parent=23914 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/" [3894189.664174] usb 1-2: USB disconnect, address 7 [3894190.956148] usblp0: removed [3894194.616198] usb 1-2: new full speed USB device using uhci_hcd and address 9 [3894194.772270] usb 1-2: configuration #1 chosen from 1 choice [3894194.785414] usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x132B pid 0x2001 [3894196.540344] usb 1-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [3894213.224117] usb 1-2: USB disconnect, address 9 [3894223.783995] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [3894223.784060] ata1.00: BMDMA stat 0x25 [3894223.784073] ata1.00: failed command: READ DMA [3894223.784096] ata1.00: cmd c8/00:08:59:f5:b9/00:00:00:00:00/e2 tag 0 dma 4096 in [3894223.784101] res 51/10:08:59:f5:b9/00:00:00:00:00/e2 Emask 0x81 (invalid argument) [3894223.784112] ata1.00: status: { DRDY ERR } [3894223.784120] ata1.00: error: { IDNF } [3894224.016634] ata1.00: configured for UDMA/33 [3894224.016671] ata1: EH complete [3894248.052383] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [3894248.052397] ata1.00: BMDMA stat 0x25 [3894248.052409] ata1.00: failed command: READ DMA [3894248.052431] ata1.00: cmd c8/00:08:53:18:6b/00:00:00:00:00/e3 tag 0 dma 4096 in [3894248.052436] res 74/69:08:53:18:6b/00:00:00:00:00/e3 Emask 0x9 (media error) [3894248.052447] ata1.00: status: { DRDY DF } [3894248.052455] ata1.00: error: { UNC } [3894248.284686] ata1.00: configured for UDMA/33 [3894248.284722] ata1: EH complete [3894271.788083] usblp0: removed