RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '78a070e9ad89c3e1ada66287f2bb0b70903878ab', '/home/buildd/filecache-default/d25cfce2b3fece95dbe9195395127ff90e07576e'] Synching the system clock with the buildd NTP service... 22 May 17:05:30 ntpdate[17357]: adjust time server 10.211.37.1 offset -0.008322 sec Unpacking chroot for build 78a070e9ad89c3e1ada66287f2bb0b70903878ab RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '78a070e9ad89c3e1ada66287f2bb0b70903878ab'] Mounting chroot for build 78a070e9ad89c3e1ada66287f2bb0b70903878ab RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '78a070e9ad89c3e1ada66287f2bb0b70903878ab', 'deb http://ftpmaster.internal/ubuntu oneiric main'] Overriding sources.list in build-78a070e9ad89c3e1ada66287f2bb0b70903878ab RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '78a070e9ad89c3e1ada66287f2bb0b70903878ab', 'armel'] Updating debian chroot for build 78a070e9ad89c3e1ada66287f2bb0b70903878ab Ign http://ftpmaster.internal oneiric InRelease Get:1 http://ftpmaster.internal oneiric Release.gpg [198 B] Get:2 http://ftpmaster.internal oneiric Release [39.8 kB] Get:3 http://ftpmaster.internal oneiric/main armel Packages [1574 kB] Ign http://ftpmaster.internal oneiric/main TranslationIndex Ign http://ftpmaster.internal oneiric/main Translation-en Fetched 1614 kB in 6s (257 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: bash binutils cpp-4.6 dpkg g++-4.6 gcc-4.5-base gcc-4.6 gcc-4.6-base insserv libc-bin libc-dev-bin libc6 libc6-dev libdb5.1 libgcc1 libgcrypt11 libgnutls26 libgomp1 libgpg-error0 libidn11 libldap-2.4-2 libmpfr4 libncurses5 libncursesw5 libpng12-0 libreadline6 libsepol1 libstdc++6 libstdc++6-4.6-dev libtasn1-3 libudev0 linux-libc-dev multiarch-support ncurses-bin patch pkg-create-dbgsym pkgbinarymangler python2.7-minimal readline-common sed udev 41 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 32.6 MB of archives. After this operation, 532 kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! bash dpkg ncurses-bin sed libc-dev-bin libc6-dev libc-bin libc6 linux-libc-dev libgomp1 gcc-4.6-base libstdc++6 cpp-4.6 libstdc++6-4.6-dev g++-4.6 gcc-4.6 libgcc1 libmpfr4 binutils libpng12-0 libudev0 libgpg-error0 libgcrypt11 libtasn1-3 libgnutls26 readline-common libncurses5 libreadline6 libdb5.1 libsepol1 multiarch-support python2.7-minimal insserv libncursesw5 udev libidn11 libldap-2.4-2 gcc-4.5-base patch pkg-create-dbgsym pkgbinarymangler Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ oneiric/main bash armel 4.2-0ubuntu4 [521 kB] Get:2 http://ftpmaster.internal/ubuntu/ oneiric/main dpkg armel 1.16.0~ubuntu8 [1828 kB] Get:3 http://ftpmaster.internal/ubuntu/ oneiric/main ncurses-bin armel 5.9-1 [147 kB] Get:4 http://ftpmaster.internal/ubuntu/ oneiric/main sed armel 4.2.1-9 [134 kB] Get:5 http://ftpmaster.internal/ubuntu/ oneiric/main libc-dev-bin armel 2.13-2ubuntu1 [75.2 kB] Get:6 http://ftpmaster.internal/ubuntu/ oneiric/main libc6-dev armel 2.13-2ubuntu1 [2331 kB] Get:7 http://ftpmaster.internal/ubuntu/ oneiric/main libc-bin armel 2.13-2ubuntu1 [847 kB] Get:8 http://ftpmaster.internal/ubuntu/ oneiric/main libc6 armel 2.13-2ubuntu1 [3846 kB] Get:9 http://ftpmaster.internal/ubuntu/ oneiric/main linux-libc-dev armel 2.6.39-3.9 [780 kB] Get:10 http://ftpmaster.internal/ubuntu/ oneiric/main libgomp1 armel 4.6.0-7ubuntu1 [23.6 kB] Get:11 http://ftpmaster.internal/ubuntu/ oneiric/main gcc-4.6-base armel 4.6.0-7ubuntu1 [14.8 kB] Get:12 http://ftpmaster.internal/ubuntu/ oneiric/main libstdc++6 armel 4.6.0-7ubuntu1 [275 kB] Get:13 http://ftpmaster.internal/ubuntu/ oneiric/main cpp-4.6 armel 4.6.0-7ubuntu1 [4036 kB] Get:14 http://ftpmaster.internal/ubuntu/ oneiric/main libstdc++6-4.6-dev armel 4.6.0-7ubuntu1 [1665 kB] Get:15 http://ftpmaster.internal/ubuntu/ oneiric/main g++-4.6 armel 4.6.0-7ubuntu1 [4888 kB] Get:16 http://ftpmaster.internal/ubuntu/ oneiric/main gcc-4.6 armel 4.6.0-7ubuntu1 [4492 kB] Get:17 http://ftpmaster.internal/ubuntu/ oneiric/main libgcc1 armel 1:4.6.0-7ubuntu1 [22.3 kB] Get:18 http://ftpmaster.internal/ubuntu/ oneiric/main libmpfr4 armel 3.0.1-3 [169 kB] Get:19 http://ftpmaster.internal/ubuntu/ oneiric/main binutils armel 2.21.51.20110421-6ubuntu1 [2226 kB] Get:20 http://ftpmaster.internal/ubuntu/ oneiric/main libpng12-0 armel 1.2.44-2ubuntu1 [117 kB] Get:21 http://ftpmaster.internal/ubuntu/ oneiric/main libudev0 armel 170-0ubuntu1 [25.4 kB] Get:22 http://ftpmaster.internal/ubuntu/ oneiric/main libgpg-error0 armel 1.10-0.3ubuntu1 [14.1 kB] Get:23 http://ftpmaster.internal/ubuntu/ oneiric/main libgcrypt11 armel 1.4.6-5ubuntu1 [261 kB] Get:24 http://ftpmaster.internal/ubuntu/ oneiric/main libtasn1-3 armel 2.9-3ubuntu1 [37.5 kB] Get:25 http://ftpmaster.internal/ubuntu/ oneiric/main libgnutls26 armel 2.10.5-1ubuntu2 [378 kB] Get:26 http://ftpmaster.internal/ubuntu/ oneiric/main readline-common all 6.2-2 [49.8 kB] Get:27 http://ftpmaster.internal/ubuntu/ oneiric/main libncurses5 armel 5.9-1 [162 kB] Get:28 http://ftpmaster.internal/ubuntu/ oneiric/main libreadline6 armel 6.2-2 [112 kB] Get:29 http://ftpmaster.internal/ubuntu/ oneiric/main libdb5.1 armel 5.1.25-10 [597 kB] Get:30 http://ftpmaster.internal/ubuntu/ oneiric/main libsepol1 armel 2.0.42-1 [103 kB] Get:31 http://ftpmaster.internal/ubuntu/ oneiric/main multiarch-support armel 2.13-2ubuntu1 [6724 B] Get:32 http://ftpmaster.internal/ubuntu/ oneiric/main python2.7-minimal armel 2.7.1-9 [1487 kB] Get:33 http://ftpmaster.internal/ubuntu/ oneiric/main insserv armel 1.14.0-2.1 [47.3 kB] Get:34 http://ftpmaster.internal/ubuntu/ oneiric/main libncursesw5 armel 5.9-1 [183 kB] Get:35 http://ftpmaster.internal/ubuntu/ oneiric/main udev armel 170-0ubuntu1 [284 kB] Get:36 http://ftpmaster.internal/ubuntu/ oneiric/main libidn11 armel 1.20-1 [107 kB] Get:37 http://ftpmaster.internal/ubuntu/ oneiric/main libldap-2.4-2 armel 2.4.25-1ubuntu1 [151 kB] Get:38 http://ftpmaster.internal/ubuntu/ oneiric/main gcc-4.5-base armel 4.5.3-1ubuntu2 [12.3 kB] Get:39 http://ftpmaster.internal/ubuntu/ oneiric/main patch armel 2.6.1-2 [78.0 kB] Get:40 http://ftpmaster.internal/ubuntu/ oneiric/main pkg-create-dbgsym all 0.49 [8300 B] Get:41 http://ftpmaster.internal/ubuntu/ oneiric/main pkgbinarymangler all 98 [25.2 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 32.6 MB in 4s (6713 kB/s) (Reading database ... 14084 files and directories currently installed.) Preparing to replace bash 4.2-0ubuntu3 (using .../bash_4.2-0ubuntu4_armel.deb) ... Unpacking replacement bash ... Setting up bash (4.2-0ubuntu4) ... Installing new version of config file /etc/bash.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz ((null)) in auto mode. (Reading database ... 14084 files and directories currently installed.) Preparing to replace dpkg 1.16.0~ubuntu7 (using .../dpkg_1.16.0~ubuntu8_armel.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.16.0~ubuntu8) ... (Reading database ... 14084 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20101128-1 (using .../ncurses-bin_5.9-1_armel.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.9-1) ... (Reading database ... 14084 files and directories currently installed.) Preparing to replace sed 4.2.1-8 (using .../archives/sed_4.2.1-9_armel.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-9) ... (Reading database ... 14084 files and directories currently installed.) Preparing to replace libc-dev-bin 2.13-0ubuntu15 (using .../libc-dev-bin_2.13-2ubuntu1_armel.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6-dev 2.13-0ubuntu15 (using .../libc6-dev_2.13-2ubuntu1_armel.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-bin 2.13-0ubuntu15 (using .../libc-bin_2.13-2ubuntu1_armel.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.13-2ubuntu1) ... (Reading database ... 14084 files and directories currently installed.) Preparing to replace libc6 2.13-0ubuntu15 (using .../libc6_2.13-2ubuntu1_armel.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.13-2ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14084 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.38-8.42 (using .../linux-libc-dev_2.6.39-3.9_armel.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libgomp1 4.6.0-6ubuntu2 (using .../libgomp1_4.6.0-7ubuntu1_armel.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.6-base 4.6.0-6ubuntu2 (using .../gcc-4.6-base_4.6.0-7ubuntu1_armel.deb) ... Unpacking replacement gcc-4.6-base ... Setting up gcc-4.6-base (4.6.0-7ubuntu1) ... (Reading database ... 14098 files and directories currently installed.) Preparing to replace libstdc++6 4.6.0-6ubuntu2 (using .../libstdc++6_4.6.0-7ubuntu1_armel.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.6.0-7ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14098 files and directories currently installed.) Preparing to replace cpp-4.6 4.6.0-6ubuntu2 (using .../cpp-4.6_4.6.0-7ubuntu1_armel.deb) ... Unpacking replacement cpp-4.6 ... Preparing to replace libstdc++6-4.6-dev 4.6.0-6ubuntu2 (using .../libstdc++6-4.6-dev_4.6.0-7ubuntu1_armel.deb) ... Unpacking replacement libstdc++6-4.6-dev ... Preparing to replace g++-4.6 4.6.0-6ubuntu2 (using .../g++-4.6_4.6.0-7ubuntu1_armel.deb) ... Unpacking replacement g++-4.6 ... Preparing to replace gcc-4.6 4.6.0-6ubuntu2 (using .../gcc-4.6_4.6.0-7ubuntu1_armel.deb) ... Unpacking replacement gcc-4.6 ... Preparing to replace libgcc1 1:4.6.0-6ubuntu2 (using .../libgcc1_1%3a4.6.0-7ubuntu1_armel.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.6.0-7ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14107 files and directories currently installed.) Preparing to replace libmpfr4 3.0.1-2 (using .../libmpfr4_3.0.1-3_armel.deb) ... Unpacking replacement libmpfr4 ... Preparing to replace binutils 2.21.51.20110421-0ubuntu5 (using .../binutils_2.21.51.20110421-6ubuntu1_armel.deb) ... Unpacking replacement binutils ... Preparing to replace libpng12-0 1.2.44-1ubuntu3 (using .../libpng12-0_1.2.44-2ubuntu1_armel.deb) ... Unpacking replacement libpng12-0 ... Preparing to replace libudev0 167-0ubuntu3 (using .../libudev0_170-0ubuntu1_armel.deb) ... Unpacking replacement libudev0 ... Preparing to replace libgpg-error0 1.10-0.2ubuntu1 (using .../libgpg-error0_1.10-0.3ubuntu1_armel.deb) ... Unpacking replacement libgpg-error0 ... Preparing to replace libgcrypt11 1.4.6-4ubuntu2 (using .../libgcrypt11_1.4.6-5ubuntu1_armel.deb) ... Unpacking replacement libgcrypt11 ... Preparing to replace libtasn1-3 2.7-1ubuntu1 (using .../libtasn1-3_2.9-3ubuntu1_armel.deb) ... Unpacking replacement libtasn1-3 ... Preparing to replace libgnutls26 2.8.6-1ubuntu2 (using .../libgnutls26_2.10.5-1ubuntu2_armel.deb) ... Unpacking replacement libgnutls26 ... Preparing to replace readline-common 6.2-1 (using .../readline-common_6.2-2_all.deb) ... Unpacking replacement readline-common ... Setting up readline-common (6.2-2) ... (Reading database ... 14107 files and directories currently installed.) Preparing to replace libncurses5 5.7+20101128-1 (using .../libncurses5_5.9-1_armel.deb) ... Unpacking replacement libncurses5 ... Setting up libncurses5 (5.9-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14107 files and directories currently installed.) Preparing to replace libreadline6 6.2-0ubuntu1 (using .../libreadline6_6.2-2_armel.deb) ... Unpacking replacement libreadline6 ... Setting up libreadline6 (6.2-2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14107 files and directories currently installed.) Preparing to replace libdb5.1 5.1.19-2ubuntu1 (using .../libdb5.1_5.1.25-10_armel.deb) ... Unpacking replacement libdb5.1 ... Setting up libdb5.1 (5.1.25-10) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14108 files and directories currently installed.) Preparing to replace libsepol1 2.0.41-1 (using .../libsepol1_2.0.42-1_armel.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.0.42-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 14107 files and directories currently installed.) Preparing to replace multiarch-support 2.13-0ubuntu15 (using .../multiarch-support_2.13-2ubuntu1_armel.deb) ... Unpacking replacement multiarch-support ... Setting up multiarch-support (2.13-2ubuntu1) ... (Reading database ... 14107 files and directories currently installed.) Preparing to replace python2.7-minimal 2.7.1-5ubuntu2 (using .../python2.7-minimal_2.7.1-9_armel.deb) ... Unpacking replacement python2.7-minimal ... Setting up python2.7-minimal (2.7.1-9) ... (Reading database ... 14107 files and directories currently installed.) Preparing to replace insserv 1.14.0-2 (using .../insserv_1.14.0-2.1_armel.deb) ... Unpacking replacement insserv ... Preparing to replace libncursesw5 5.7+20101128-1 (using .../libncursesw5_5.9-1_armel.deb) ... Unpacking replacement libncursesw5 ... Preparing to replace udev 167-0ubuntu3 (using .../udev_170-0ubuntu1_armel.deb) ... Adding 'diversion of /sbin/udevadm to /sbin/udevadm.upgrade by fake-udev' Unpacking replacement udev ... Preparing to replace libidn11 1.18-1build1 (using .../libidn11_1.20-1_armel.deb) ... Unpacking replacement libidn11 ... Preparing to replace libldap-2.4-2 2.4.23-6ubuntu6 (using .../libldap-2.4-2_2.4.25-1ubuntu1_armel.deb) ... Unpacking replacement libldap-2.4-2 ... Preparing to replace gcc-4.5-base 4.5.2-11ubuntu2 (using .../gcc-4.5-base_4.5.3-1ubuntu2_armel.deb) ... Unpacking replacement gcc-4.5-base ... Preparing to replace patch 2.6-3 (using .../patch_2.6.1-2_armel.deb) ... Unpacking replacement patch ... Preparing to replace pkg-create-dbgsym 0.48 (using .../pkg-create-dbgsym_0.49_all.deb) ... Unpacking replacement pkg-create-dbgsym ... Preparing to replace pkgbinarymangler 97 (using .../pkgbinarymangler_98_all.deb) ... Unpacking replacement pkgbinarymangler ... Setting up libc-dev-bin (2.13-2ubuntu1) ... Setting up linux-libc-dev (2.6.39-3.9) ... Setting up libc6-dev (2.13-2ubuntu1) ... Setting up libgomp1 (4.6.0-7ubuntu1) ... Setting up libmpfr4 (3.0.1-3) ... Setting up cpp-4.6 (4.6.0-7ubuntu1) ... Setting up binutils (2.21.51.20110421-6ubuntu1) ... Setting up gcc-4.6 (4.6.0-7ubuntu1) ... Setting up libpng12-0 (1.2.44-2ubuntu1) ... Setting up libudev0 (170-0ubuntu1) ... Setting up libgpg-error0 (1.10-0.3ubuntu1) ... Setting up libgcrypt11 (1.4.6-5ubuntu1) ... Setting up libtasn1-3 (2.9-3ubuntu1) ... Setting up libgnutls26 (2.10.5-1ubuntu2) ... Setting up insserv (1.14.0-2.1) ... Installing new version of config file /etc/insserv.conf ... Setting up libncursesw5 (5.9-1) ... Setting up udev (170-0ubuntu1) ... Removing 'diversion of /sbin/udevadm to /sbin/udevadm.upgrade by fake-udev' update-initramfs: deferring update (trigger activated) Setting up libidn11 (1.20-1) ... Setting up libldap-2.4-2 (2.4.25-1ubuntu1) ... Installing new version of config file /etc/ldap/ldap.conf ... Setting up gcc-4.5-base (4.5.3-1ubuntu2) ... Setting up patch (2.6.1-2) ... Setting up pkg-create-dbgsym (0.49) ... Setting up pkgbinarymangler (98) ... Setting up g++-4.6 (4.6.0-7ubuntu1) ... Setting up libstdc++6-4.6-dev (4.6.0-7ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Processing triggers for initramfs-tools ... RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '78a070e9ad89c3e1ada66287f2bb0b70903878ab', 'armel', 'oneiric', '--nolog', '--batch', '--archive=ubuntu', '--dist=oneiric', '--purpose=PRIMARY', '--architecture=armel', '--comp=main', 'pam-p11_0.1.5-1build2.dsc'] Initiating build 78a070e9ad89c3e1ada66287f2bb0b70903878ab with 0 processor cores. Automatic build of pam-p11_0.1.5-1build2 on anacardiaceae by sbuild/armel 1.170.5 Build started at 20110522-1709 ****************************************************************************** pam-p11_0.1.5-1build2.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 4.1), cdbs, libpam0g-dev, libp11-dev, libltdl-dev Checking for already installed source dependencies... debhelper: missing cdbs: missing libpam0g-dev: missing libp11-dev: missing libltdl-dev: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper cdbs libpam0g-dev libp11-dev libltdl-dev Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf automake autotools-dev bsdmainutils dh-translations fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libencode-locale-perl libexpat1 libfile-listing-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libltdl7 liblwp-mediatypes-perl libmagic1 libnet-http-perl libp11-2 libpipeline1 libpopt0 libsqlite3-0 libssl-dev libunistring0 liburi-perl libwww-perl libwww-robotrules-perl libxml-parser-perl libxml2 m4 man-db mime-support pkg-config po-debconf python python-scour python2.7 zlib1g-dev Suggested packages: autoconf2.13 autoconf-archive gnu-standards autoconf-doc libtool wamerican wordlist whois vacation devscripts dh-make gettext-doc groff libdata-dump-perl libtool-doc less www-browser libmail-box-perl python-doc python-tk python-profiler python-rsvg python-cairo python2.7-doc python2.7-profiler Recommended packages: curl wget lynx-cur libio-socket-ssl-perl libssl-doc libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl xml-core libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils cdbs debhelper dh-translations fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libencode-locale-perl libexpat1 libfile-listing-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libltdl-dev libltdl7 liblwp-mediatypes-perl libmagic1 libnet-http-perl libp11-2 libp11-dev libpam0g-dev libpipeline1 libpopt0 libsqlite3-0 libssl-dev libunistring0 liburi-perl libwww-perl libwww-robotrules-perl libxml-parser-perl libxml2 m4 man-db mime-support pkg-config po-debconf python python-scour python2.7 zlib1g-dev 0 upgraded, 53 newly installed, 0 to remove and 0 not upgraded. Need to get 12.7 MB of archives. After this operation, 44.8 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libexpat1 libsqlite3-0 libmagic1 file libpopt0 mime-support python2.7 python bsdmainutils gettext-base groff-base libencode-locale-perl liburi-perl libhtml-tagset-perl libhtml-parser-perl libhtml-tree-perl libhttp-date-perl liblwp-mediatypes-perl libhttp-message-perl libhttp-cookies-perl libhttp-negotiate-perl libnet-http-perl libpipeline1 libfile-listing-perl libwww-robotrules-perl libwww-perl libxml-parser-perl libxml2 man-db m4 autoconf autotools-dev automake html2text libcroco3 libunistring0 gettext intltool-debian po-debconf debhelper fdupes intltool dh-translations python-scour cdbs libltdl7 libltdl-dev libp11-2 zlib1g-dev libssl-dev pkg-config libp11-dev libpam0g-dev Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ oneiric/main libexpat1 armel 2.0.1-7ubuntu3 [103 kB] Get:2 http://ftpmaster.internal/ubuntu/ oneiric/main libsqlite3-0 armel 3.7.6.2-1ubuntu1 [274 kB] Get:3 http://ftpmaster.internal/ubuntu/ oneiric/main libmagic1 armel 5.04-5ubuntu2 [201 kB] Get:4 http://ftpmaster.internal/ubuntu/ oneiric/main file armel 5.04-5ubuntu2 [22.2 kB] Get:5 http://ftpmaster.internal/ubuntu/ oneiric/main libpopt0 armel 1.16-1 [32.8 kB] Get:6 http://ftpmaster.internal/ubuntu/ oneiric/main mime-support all 3.51-1ubuntu1 [30.7 kB] Get:7 http://ftpmaster.internal/ubuntu/ oneiric/main python2.7 armel 2.7.1-9 [2496 kB] Get:8 http://ftpmaster.internal/ubuntu/ oneiric/main python all 2.7.1-0ubuntu5 [163 kB] Get:9 http://ftpmaster.internal/ubuntu/ oneiric/main bsdmainutils armel 8.2.2ubuntu1 [194 kB] Get:10 http://ftpmaster.internal/ubuntu/ oneiric/main gettext-base armel 0.18.1.1-3ubuntu1 [56.1 kB] Get:11 http://ftpmaster.internal/ubuntu/ oneiric/main groff-base armel 1.21-5 [929 kB] Get:12 http://ftpmaster.internal/ubuntu/ oneiric/main libencode-locale-perl all 1.02-1 [11.8 kB] Get:13 http://ftpmaster.internal/ubuntu/ oneiric/main liburi-perl all 1.58-1 [89.8 kB] Get:14 http://ftpmaster.internal/ubuntu/ oneiric/main libhtml-tagset-perl all 3.20-2 [13.5 kB] Get:15 http://ftpmaster.internal/ubuntu/ oneiric/main libhtml-parser-perl armel 3.68-1build1 [95.5 kB] Get:16 http://ftpmaster.internal/ubuntu/ oneiric/main libhtml-tree-perl all 4.2-1 [205 kB] Get:17 http://ftpmaster.internal/ubuntu/ oneiric/main libhttp-date-perl all 6.00-1 [10.1 kB] Get:18 http://ftpmaster.internal/ubuntu/ oneiric/main liblwp-mediatypes-perl all 6.01-1 [17.5 kB] Get:19 http://ftpmaster.internal/ubuntu/ oneiric/main libhttp-message-perl all 6.01-1 [77.6 kB] Get:20 http://ftpmaster.internal/ubuntu/ oneiric/main libhttp-cookies-perl all 6.00-2 [23.3 kB] Get:21 http://ftpmaster.internal/ubuntu/ oneiric/main libhttp-negotiate-perl all 6.00-2 [13.4 kB] Get:22 http://ftpmaster.internal/ubuntu/ oneiric/main libnet-http-perl all 6.01-1 [20.5 kB] Get:23 http://ftpmaster.internal/ubuntu/ oneiric/main libpipeline1 armel 1.2.0-1 [20.3 kB] Get:24 http://ftpmaster.internal/ubuntu/ oneiric/main libfile-listing-perl all 6.01-1 [8988 B] Get:25 http://ftpmaster.internal/ubuntu/ oneiric/main libwww-robotrules-perl all 6.01-1 [14.1 kB] Get:26 http://ftpmaster.internal/ubuntu/ oneiric/main libwww-perl all 6.01-3 [158 kB] Get:27 http://ftpmaster.internal/ubuntu/ oneiric/main libxml-parser-perl armel 2.40-2 [296 kB] Get:28 http://ftpmaster.internal/ubuntu/ oneiric/main libxml2 armel 2.7.8.dfsg-2 [561 kB] Get:29 http://ftpmaster.internal/ubuntu/ oneiric/main man-db armel 2.6.0.2-1 [677 kB] Get:30 http://ftpmaster.internal/ubuntu/ oneiric/main m4 armel 1.4.16-1 [182 kB] Get:31 http://ftpmaster.internal/ubuntu/ oneiric/main autoconf all 2.68-1ubuntu1 [560 kB] Get:32 http://ftpmaster.internal/ubuntu/ oneiric/main autotools-dev all 20110511.1 [44.7 kB] Get:33 http://ftpmaster.internal/ubuntu/ oneiric/main automake all 1:1.11.1-1ubuntu1 [544 kB] Get:34 http://ftpmaster.internal/ubuntu/ oneiric/main html2text armel 1.3.2a-15 [94.3 kB] Get:35 http://ftpmaster.internal/ubuntu/ oneiric/main libcroco3 armel 0.6.2-1 [89.5 kB] Get:36 http://ftpmaster.internal/ubuntu/ oneiric/main libunistring0 armel 0.9.3-4 [394 kB] Get:37 http://ftpmaster.internal/ubuntu/ oneiric/main gettext armel 0.18.1.1-3ubuntu1 [1156 kB] Get:38 http://ftpmaster.internal/ubuntu/ oneiric/main intltool-debian all 0.35.0+20060710.1 [31.6 kB] Get:39 http://ftpmaster.internal/ubuntu/ oneiric/main po-debconf all 1.0.16+nmu1 [212 kB] Get:40 http://ftpmaster.internal/ubuntu/ oneiric/main debhelper all 8.1.6ubuntu2 [485 kB] Get:41 http://ftpmaster.internal/ubuntu/ oneiric/main fdupes armel 1.50-PR2-3 [20.9 kB] Get:42 http://ftpmaster.internal/ubuntu/ oneiric/main intltool all 0.41.1-1 [103 kB] Get:43 http://ftpmaster.internal/ubuntu/ oneiric/main dh-translations all 98 [18.6 kB] Get:44 http://ftpmaster.internal/ubuntu/ oneiric/main python-scour all 0.26-1 [46.2 kB] Get:45 http://ftpmaster.internal/ubuntu/ oneiric/main cdbs all 0.4.93ubuntu3 [48.3 kB] Get:46 http://ftpmaster.internal/ubuntu/ oneiric/main libltdl7 armel 2.4-2ubuntu1 [34.5 kB] Get:47 http://ftpmaster.internal/ubuntu/ oneiric/main libltdl-dev armel 2.4-2ubuntu1 [199 kB] Get:48 http://ftpmaster.internal/ubuntu/ oneiric/main libp11-2 armel 0.2.8-1 [14.6 kB] Get:49 http://ftpmaster.internal/ubuntu/ oneiric/main zlib1g-dev armel 1:1.2.3.4.dfsg-3ubuntu3 [161 kB] Get:50 http://ftpmaster.internal/ubuntu/ oneiric/main libssl-dev armel 1.0.0d-2ubuntu1 [1218 kB] Get:51 http://ftpmaster.internal/ubuntu/ oneiric/main pkg-config armel 0.26-1 [37.8 kB] Get:52 http://ftpmaster.internal/ubuntu/ oneiric/main libp11-dev armel 0.2.8-1 [29.4 kB] Get:53 http://ftpmaster.internal/ubuntu/ oneiric/main libpam0g-dev armel 1.1.2-2ubuntu9 [116 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 12.7 MB in 2s (6097 kB/s) Selecting previously deselected package libexpat1. (Reading database ... 14098 files and directories currently installed.) Unpacking libexpat1 (from .../libexpat1_2.0.1-7ubuntu3_armel.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.7.6.2-1ubuntu1_armel.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_5.04-5ubuntu2_armel.deb) ... Selecting previously deselected package file. Unpacking file (from .../file_5.04-5ubuntu2_armel.deb) ... Selecting previously deselected package libpopt0. Unpacking libpopt0 (from .../libpopt0_1.16-1_armel.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.51-1ubuntu1_all.deb) ... Selecting previously deselected package python2.7. Unpacking python2.7 (from .../python2.7_2.7.1-9_armel.deb) ... Selecting previously deselected package python. Unpacking python (from .../python_2.7.1-0ubuntu5_all.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.2.2ubuntu1_armel.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.18.1.1-3ubuntu1_armel.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.21-5_armel.deb) ... Selecting previously deselected package libencode-locale-perl. Unpacking libencode-locale-perl (from .../libencode-locale-perl_1.02-1_all.deb) ... Selecting previously deselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.58-1_all.deb) ... Selecting previously deselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously deselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.68-1build1_armel.deb) ... Selecting previously deselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_4.2-1_all.deb) ... Selecting previously deselected package libhttp-date-perl. Unpacking libhttp-date-perl (from .../libhttp-date-perl_6.00-1_all.deb) ... Selecting previously deselected package liblwp-mediatypes-perl. Unpacking liblwp-mediatypes-perl (from .../liblwp-mediatypes-perl_6.01-1_all.deb) ... Selecting previously deselected package libhttp-message-perl. Unpacking libhttp-message-perl (from .../libhttp-message-perl_6.01-1_all.deb) ... Selecting previously deselected package libhttp-cookies-perl. Unpacking libhttp-cookies-perl (from .../libhttp-cookies-perl_6.00-2_all.deb) ... Selecting previously deselected package libhttp-negotiate-perl. Unpacking libhttp-negotiate-perl (from .../libhttp-negotiate-perl_6.00-2_all.deb) ... Selecting previously deselected package libnet-http-perl. Unpacking libnet-http-perl (from .../libnet-http-perl_6.01-1_all.deb) ... Selecting previously deselected package libpipeline1. Unpacking libpipeline1 (from .../libpipeline1_1.2.0-1_armel.deb) ... Selecting previously deselected package libfile-listing-perl. Unpacking libfile-listing-perl (from .../libfile-listing-perl_6.01-1_all.deb) ... Selecting previously deselected package libwww-robotrules-perl. Unpacking libwww-robotrules-perl (from .../libwww-robotrules-perl_6.01-1_all.deb) ... Selecting previously deselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_6.01-3_all.deb) ... Selecting previously deselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.40-2_armel.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.8.dfsg-2_armel.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.6.0.2-1_armel.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../archives/m4_1.4.16-1_armel.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.68-1ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20110511.1_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.11.1-1ubuntu1_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-15_armel.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_armel.deb) ... Selecting previously deselected package libunistring0. Unpacking libunistring0 (from .../libunistring0_0.9.3-4_armel.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.18.1.1-3ubuntu1_armel.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16+nmu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_8.1.6ubuntu2_all.deb) ... Selecting previously deselected package fdupes. Unpacking fdupes (from .../fdupes_1.50-PR2-3_armel.deb) ... Selecting previously deselected package intltool. Unpacking intltool (from .../intltool_0.41.1-1_all.deb) ... Selecting previously deselected package dh-translations. Unpacking dh-translations (from .../dh-translations_98_all.deb) ... Selecting previously deselected package python-scour. Unpacking python-scour (from .../python-scour_0.26-1_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.93ubuntu3_all.deb) ... Selecting previously deselected package libltdl7. Unpacking libltdl7 (from .../libltdl7_2.4-2ubuntu1_armel.deb) ... Selecting previously deselected package libltdl-dev. Unpacking libltdl-dev (from .../libltdl-dev_2.4-2ubuntu1_armel.deb) ... Selecting previously deselected package libp11-2. Unpacking libp11-2 (from .../libp11-2_0.2.8-1_armel.deb) ... Selecting previously deselected package zlib1g-dev. Unpacking zlib1g-dev (from .../zlib1g-dev_1%3a1.2.3.4.dfsg-3ubuntu3_armel.deb) ... Selecting previously deselected package libssl-dev. Unpacking libssl-dev (from .../libssl-dev_1.0.0d-2ubuntu1_armel.deb) ... Selecting previously deselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.26-1_armel.deb) ... Selecting previously deselected package libp11-dev. Unpacking libp11-dev (from .../libp11-dev_0.2.8-1_armel.deb) ... Selecting previously deselected package libpam0g-dev. Unpacking libpam0g-dev (from .../libpam0g-dev_1.1.2-2ubuntu9_armel.deb) ... Setting up libexpat1 (2.0.1-7ubuntu3) ... Setting up libsqlite3-0 (3.7.6.2-1ubuntu1) ... Setting up libmagic1 (5.04-5ubuntu2) ... Setting up file (5.04-5ubuntu2) ... Setting up libpopt0 (1.16-1) ... Setting up mime-support (3.51-1ubuntu1) ... update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode. Setting up python2.7 (2.7.1-9) ... Setting up python (2.7.1-0ubuntu5) ... Setting up bsdmainutils (8.2.2ubuntu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode. Setting up gettext-base (0.18.1.1-3ubuntu1) ... Setting up groff-base (1.21-5) ... Setting up libencode-locale-perl (1.02-1) ... Setting up liburi-perl (1.58-1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up libhtml-parser-perl (3.68-1build1) ... Setting up libhtml-tree-perl (4.2-1) ... Setting up libhttp-date-perl (6.00-1) ... Setting up liblwp-mediatypes-perl (6.01-1) ... Setting up libhttp-message-perl (6.01-1) ... Setting up libhttp-cookies-perl (6.00-2) ... Setting up libhttp-negotiate-perl (6.00-2) ... Setting up libnet-http-perl (6.01-1) ... Setting up libpipeline1 (1.2.0-1) ... Setting up libfile-listing-perl (6.01-1) ... Setting up libwww-robotrules-perl (6.01-1) ... Setting up libwww-perl (6.01-3) ... Setting up libxml-parser-perl (2.40-2) ... Setting up libxml2 (2.7.8.dfsg-2) ... Setting up man-db (2.6.0.2-1) ... Building database of manual pages ... Setting up m4 (1.4.16-1) ... Setting up autoconf (2.68-1ubuntu1) ... Setting up autotools-dev (20110511.1) ... Setting up automake (1:1.11.1-1ubuntu1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode. Setting up html2text (1.3.2a-15) ... Setting up libcroco3 (0.6.2-1) ... Setting up libunistring0 (0.9.3-4) ... Setting up gettext (0.18.1.1-3ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16+nmu1) ... Setting up debhelper (8.1.6ubuntu2) ... Setting up fdupes (1.50-PR2-3) ... Setting up intltool (0.41.1-1) ... Setting up dh-translations (98) ... Setting up python-scour (0.26-1) ... Setting up cdbs (0.4.93ubuntu3) ... Setting up libltdl7 (2.4-2ubuntu1) ... Setting up libltdl-dev (2.4-2ubuntu1) ... Setting up libp11-2 (0.2.8-1) ... Setting up zlib1g-dev (1:1.2.3.4.dfsg-3ubuntu3) ... Setting up libssl-dev (1.0.0d-2ubuntu1) ... Setting up pkg-config (0.26-1) ... Setting up libp11-dev (0.2.8-1) ... Setting up libpam0g-dev (1.1.2-2ubuntu9) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.13-2ubuntu1 make_3.81-8ubuntu1 dpkg-dev_1.16.0~ubuntu8 gcc-4.6_4.6.0-7ubuntu1 g++-4.6_4.6.0-7ubuntu1 binutils_2.21.51.20110421-6ubuntu1 libstdc++6_4.6.0-7ubuntu1 libstdc++6-4.6-dev_4.6.0-7ubuntu1 ------------------------------------------------------------------------------ gpgv: Signature made Sun May 22 17:00:51 2011 UTC using RSA key ID 7D86500B gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./pam-p11_0.1.5-1build2.dsc dpkg-source: info: extracting pam-p11 in pam-p11-0.1.5 dpkg-source: info: unpacking pam-p11_0.1.5.orig.tar.gz dpkg-source: info: applying pam-p11_0.1.5-1build2.diff.gz dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package pam-p11 dpkg-buildpackage: source version 0.1.5-1build2 dpkg-source --before-build pam-p11-0.1.5 dpkg-buildpackage: host architecture armel /usr/bin/fakeroot debian/rules clean test -x debian/rules dh_testroot rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . -k distclean make[1]: Entering directory `/build/buildd/pam-p11-0.1.5' make[1]: *** No rule to make target `distclean'. make[1]: Leaving directory `/build/buildd/pam-p11-0.1.5' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-autotools rmdir --ignore-fail-on-non-empty . rmdir: failed to remove `.': Invalid argument make: [makefile-clean] Error 1 (ignored) for i in ./config.guess ./config.sub ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done rm -f debian/stamp-autotools-files dh_clean dh_clean: Compatibility levels before 5 are deprecated. debian/rules build test -x debian/rules mkdir -p "." echo 5 >debian/compat if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi touch debian/stamp-autotools-files chmod a+x /build/buildd/pam-p11-0.1.5/./configure mkdir -p . cd . && CFLAGS="-g -O2 -g -O2 -Wall" CXXFLAGS="-g -O2 -g -O2 -Wall" CPPFLAGS="" LDFLAGS="-Wl,-Bsymbolic-functions" /build/buildd/pam-p11-0.1.5/./configure --build=arm-linux-gnueabi --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/pam-p11" --srcdir=. --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules --libdir=/lib checking build system type... arm-unknown-linux-gnueabi checking host system type... arm-unknown-linux-gnueabi checking target system type... arm-unknown-linux-gnueabi checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... none checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 805306365 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking for ANSI C header files... (cached) yes checking for string.h... (cached) yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for unistd.h... (cached) yes checking security/pam_ext.h usability... yes checking security/pam_ext.h presence... yes checking for security/pam_ext.h... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking whether lstat dereferences a symlink specified with a trailing slash... yes checking whether stat accepts an empty string... no checking for vprintf... yes checking for _doprnt... no checking for memset... yes checking for strdup... yes checking for strerror... yes checking for pam_get_item in -lpam... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for OPENSSL... yes checking for LIBP11... yes configure: creating ./config.status config.status: creating Makefile config.status: creating aclocal/Makefile config.status: creating doc/Makefile config.status: creating src/Makefile config.status: executing depfiles commands touch debian/stamp-autotools /usr/bin/make -C . make[1]: Entering directory `/build/buildd/pam-p11-0.1.5' Making all in . make[2]: Entering directory `/build/buildd/pam-p11-0.1.5' make[2]: Nothing to be done for `all-am'. make[2]: Leaving directory `/build/buildd/pam-p11-0.1.5' Making all in aclocal make[2]: Entering directory `/build/buildd/pam-p11-0.1.5/aclocal' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/build/buildd/pam-p11-0.1.5/aclocal' Making all in src make[2]: Entering directory `/build/buildd/pam-p11-0.1.5/src' /bin/bash ../libtool --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" -DPACKAGE_STRING=\"pam_p11\ 0.1.5\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c -o pam_p11.lo pam_p11.c mkdir .libs gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" "-DPACKAGE_STRING=\"pam_p11 0.1.5\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c pam_p11.c -fPIC -DPIC -o .libs/pam_p11.o gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" "-DPACKAGE_STRING=\"pam_p11 0.1.5\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c pam_p11.c -o pam_p11.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" -DPACKAGE_STRING=\"pam_p11\ 0.1.5\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c -o base64.lo base64.c gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" "-DPACKAGE_STRING=\"pam_p11 0.1.5\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c base64.c -fPIC -DPIC -o .libs/base64.o gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" "-DPACKAGE_STRING=\"pam_p11 0.1.5\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c base64.c -o base64.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" -DPACKAGE_STRING=\"pam_p11\ 0.1.5\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c -o match_openssh.lo match_openssh.c gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" "-DPACKAGE_STRING=\"pam_p11 0.1.5\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c match_openssh.c -fPIC -DPIC -o .libs/match_openssh.o match_openssh.c: In function 'ssh2_line_to_key': match_openssh.c:154:2: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness [-Wpointer-sign] /usr/include/string.h:399:15: note: expected 'const char *' but argument is of type 'unsigned char *' match_openssh.c:154:2: warning: pointer targets in passing argument 1 of '__builtin_strlen' differ in signedness [-Wpointer-sign] match_openssh.c:154:2: note: expected 'const char *' but argument is of type 'unsigned char *' match_openssh.c:154:2: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] match_openssh.c:154:2: note: expected 'const char *' but argument is of type 'unsigned char *' match_openssh.c:154:2: warning: pointer targets in passing argument 1 of '__builtin_strlen' differ in signedness [-Wpointer-sign] match_openssh.c:154:2: note: expected 'const char *' but argument is of type 'unsigned char *' match_openssh.c:154:2: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] match_openssh.c:154:2: note: expected 'const char *' but argument is of type 'unsigned char *' match_openssh.c:154:2: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] match_openssh.c:154:2: note: expected 'const char *' but argument is of type 'unsigned char *' match_openssh.c:154:2: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] match_openssh.c:154:2: note: expected 'const char *' but argument is of type 'unsigned char *' match_openssh.c:154:2: warning: pointer targets in passing argument 1 of 'strncmp' differ in signedness [-Wpointer-sign] /usr/include/string.h:146:12: note: expected 'const char *' but argument is of type 'unsigned char *' gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" "-DPACKAGE_STRING=\"pam_p11 0.1.5\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c match_openssh.c -o match_openssh.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=link gcc -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -module -avoid-version -Wl,-Bsymbolic-functions -o pam_p11_openssh.la -rpath /lib pam_p11.lo base64.lo match_openssh.lo -lssl -lcrypto -lp11 -lpam gcc -shared .libs/pam_p11.o .libs/base64.o .libs/match_openssh.o -lssl -lcrypto -lp11 -lpam -Wl,-Bsymbolic-functions -Wl,-soname -Wl,pam_p11_openssh.so -o .libs/pam_p11_openssh.so ar cru .libs/pam_p11_openssh.a pam_p11.o base64.o match_openssh.o ranlib .libs/pam_p11_openssh.a creating pam_p11_openssh.la (cd .libs && rm -f pam_p11_openssh.la && ln -s ../pam_p11_openssh.la pam_p11_openssh.la) /bin/bash ../libtool --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" -DPACKAGE_STRING=\"pam_p11\ 0.1.5\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c -o match_opensc.lo match_opensc.c gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" "-DPACKAGE_STRING=\"pam_p11 0.1.5\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c match_opensc.c -fPIC -DPIC -o .libs/match_opensc.o gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" "-DPACKAGE_STRING=\"pam_p11 0.1.5\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c match_opensc.c -o match_opensc.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=link gcc -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -module -avoid-version -Wl,-Bsymbolic-functions -o pam_p11_opensc.la -rpath /lib pam_p11.lo match_opensc.lo -lssl -lcrypto -lp11 -lpam gcc -shared .libs/pam_p11.o .libs/match_opensc.o -lssl -lcrypto -lp11 -lpam -Wl,-Bsymbolic-functions -Wl,-soname -Wl,pam_p11_opensc.so -o .libs/pam_p11_opensc.so ar cru .libs/pam_p11_opensc.a pam_p11.o match_opensc.o ranlib .libs/pam_p11_opensc.a creating pam_p11_opensc.la (cd .libs && rm -f pam_p11_opensc.la && ln -s ../pam_p11_opensc.la pam_p11_opensc.la) gcc -DPACKAGE_NAME=\"pam_p11\" -DPACKAGE_TARNAME=\"pam_p11\" -DPACKAGE_VERSION=\"0.1.5\" -DPACKAGE_STRING=\"pam_p11\ 0.1.5\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pam_p11\" -DVERSION=\"0.1.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_SYSLOG_H=1 -DHAVE_FCNTL_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SECURITY_PAM_EXT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_STDLIB_H=1 -DHAVE_REALLOC=1 -DLSTAT_FOLLOWS_SLASHED_SYMLINK=1 -DHAVE_VPRINTF=1 -DHAVE_MEMSET=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_LIBPAM=1 -I. -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -c test.c test.c: In function 'main': test.c:12:2: warning: passing argument 4 of 'pam_sm_authenticate' from incompatible pointer type [enabled by default] /usr/include/security/pam_modules.h:70:16: note: expected 'const char **' but argument is of type 'char *' /bin/bash ../libtool --tag=CC --mode=link gcc -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -module -avoid-version -Wl,-Bsymbolic-functions -o test test.o pam_p11_openssh.la -lpam *** Warning: Linking the executable test against the loadable module *** pam_p11_openssh.so is not portable! gcc -Wall -fno-strict-aliasing -g -O2 -g -O2 -Wall -Wl,-Bsymbolic-functions -o .libs/test test.o ./.libs/pam_p11_openssh.so -lpam creating test make[2]: Leaving directory `/build/buildd/pam-p11-0.1.5/src' make[1]: Leaving directory `/build/buildd/pam-p11-0.1.5' touch debian/stamp-makefile-build DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/fakeroot debian/rules binary-arch test -x debian/rules dh_testroot dh_clean -k dh_clean: dh_clean -k is deprecated; use dh_prep instead dh_installdirs -A mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/make -C . install DESTDIR=/build/buildd/pam-p11-0.1.5/debian/libpam-p11/ make[1]: Entering directory `/build/buildd/pam-p11-0.1.5' Making install in . make[2]: Entering directory `/build/buildd/pam-p11-0.1.5' make[3]: Entering directory `/build/buildd/pam-p11-0.1.5' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/pam-p11-0.1.5' make[2]: Leaving directory `/build/buildd/pam-p11-0.1.5' Making install in aclocal make[2]: Entering directory `/build/buildd/pam-p11-0.1.5/aclocal' make[3]: Entering directory `/build/buildd/pam-p11-0.1.5/aclocal' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/pam-p11-0.1.5/aclocal' make[2]: Leaving directory `/build/buildd/pam-p11-0.1.5/aclocal' Making install in src make[2]: Entering directory `/build/buildd/pam-p11-0.1.5/src' /bin/bash /build/buildd/pam-p11-0.1.5/install-sh -d /build/buildd/pam-p11-0.1.5/debian/libpam-p11///lib/security /usr/bin/install -c ../src/.libs/pam_p11_openssh.so /build/buildd/pam-p11-0.1.5/debian/libpam-p11///lib/security /usr/bin/install -c ../src/.libs/pam_p11_opensc.so /build/buildd/pam-p11-0.1.5/debian/libpam-p11///lib/security make[2]: Leaving directory `/build/buildd/pam-p11-0.1.5/src' make[1]: Leaving directory `/build/buildd/pam-p11-0.1.5' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/libpam-p11.substvars dh_installdirs -plibpam-p11 dh_installdocs -plibpam-p11 ./NEWS dh_installexamples -plibpam-p11 dh_installman -plibpam-p11 dh_installinfo -plibpam-p11 dh_installmenu -plibpam-p11 dh_installcron -plibpam-p11 dh_installinit -plibpam-p11 dh_installdebconf -plibpam-p11 dh_installemacsen -plibpam-p11 dh_installcatalogs -plibpam-p11 dh_installpam -plibpam-p11 dh_installlogrotate -plibpam-p11 dh_installlogcheck -plibpam-p11 dh_installgsettings -plibpam-p11 dh_installchangelogs -plibpam-p11 doc/ChangeLog dh_installudev -plibpam-p11 dh_lintian -plibpam-p11 dh_bugfiles -plibpam-p11 dh_install -plibpam-p11 dh_link -plibpam-p11 dh_installmime -plibpam-p11 dh_strip -plibpam-p11 dh_strip debug symbol extraction: all non-arch-all packages for this build platform armel: libpam-p11 dh_strip debug symbol extraction: packages to act on: libpam-p11 dh_strip debug symbol extraction: ignored packages: dpkg-deb: building package `libpam-p11-dbgsym' in `../libpam-p11-dbgsym_0.1.5-1build2_armel.ddeb'. dh_compress -plibpam-p11 dh_fixperms -plibpam-p11 dh_makeshlibs -plibpam-p11 dh_installdeb -plibpam-p11 dh_perl -plibpam-p11 dh_shlibdeps -plibpam-p11 dh_gencontrol -plibpam-p11 # only call dh_scour for packages in main if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibpam-p11 ; fi dh_link -p libpam-p11 dh_md5sums -plibpam-p11 dh_builddeb -plibpam-p11 INFO: pkgstriptranslations version 98 pkgstriptranslations: processing control file: ./debian/libpam-p11/DEBIAN/control, package libpam-p11, directory ./debian/libpam-p11 pkgstriptranslations: libpam-p11 does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libpam-p11/DEBIAN/control, package libpam-p11, directory debian/libpam-p11 .. removing usr/share/doc/libpam-p11/changelog.gz dpkg-deb: warning: 'debian/libpam-p11/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `libpam-p11' in `../libpam-p11_0.1.5-1build2_armel.deb'. dpkg-genchanges -B -mUbuntu/armel Build Daemon >../pam-p11_0.1.5-1build2_armel.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-source --after-build pam-p11-0.1.5 dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20110522-1716 Publishing debug debs. chroot-autobuild/build/buildd/libpam-p11_0.1.5-1build2_armel.deb: new debian package, version 2.0. size 19686 bytes: control archive= 1022 bytes. 652 bytes, 17 lines control 941 bytes, 13 lines md5sums Package: libpam-p11 Source: pam-p11 Version: 0.1.5-1build2 Architecture: armel Maintainer: Ubuntu Developers Original-Maintainer: Eric Dorland Installed-Size: 120 Depends: libc6 (>= 2.4), libp11-2 (>= 0.2.8), libpam0g (>= 0.99.7.1), libssl1.0.0 (>= 1.0.0) Conflicts: libpam-opensc Replaces: libpam-opensc Provides: libpam-opensc Section: admin Priority: optional Homepage: http://www.opensc-project.org/pam_p11/ Description: PAM module for using PKCS#11 smart cards A Pluggable Authentication Module for PKCS#11 based smart cards. Useful for enabling smart card based user login to a system. chroot-autobuild/build/buildd/libpam-p11_0.1.5-1build2_armel.deb: drwxr-xr-x root/root 0 2011-05-22 17:14 ./ drwxr-xr-x root/root 0 2011-05-22 17:14 ./lib/ drwxr-xr-x root/root 0 2011-05-22 17:14 ./lib/security/ -rw-r--r-- root/root 9688 2011-05-22 17:14 ./lib/security/pam_p11_opensc.so -rw-r--r-- root/root 9704 2011-05-22 17:14 ./lib/security/pam_p11_openssh.so drwxr-xr-x root/root 0 2011-05-22 17:14 ./usr/ drwxr-xr-x root/root 0 2011-05-22 17:14 ./usr/share/ drwxr-xr-x root/root 0 2011-05-22 17:14 ./usr/share/doc/ drwxr-xr-x root/root 0 2011-05-22 17:16 ./usr/share/doc/libpam-p11/ -rw-r--r-- root/root 1258 2011-05-22 17:12 ./usr/share/doc/libpam-p11/copyright -rw-r--r-- root/root 2771 2008-08-27 09:37 ./usr/share/doc/libpam-p11/index.html -rw-r--r-- root/root 5388 2008-08-27 09:37 ./usr/share/doc/libpam-p11/QuickStart.html -rw-r--r-- root/root 1712 2008-08-27 09:37 ./usr/share/doc/libpam-p11/PageTemplates.html -rw-r--r-- root/root 379 2008-07-31 13:23 ./usr/share/doc/libpam-p11/README -rw-r--r-- root/root 2659 2008-08-27 09:37 ./usr/share/doc/libpam-p11/MailingLists.html -rw-r--r-- root/root 1628 2008-08-27 09:37 ./usr/share/doc/libpam-p11/ResourcesLinks.html -rw-r--r-- root/root 702 2011-05-22 17:12 ./usr/share/doc/libpam-p11/changelog.Debian.gz -rw-r--r-- root/root 3597 2008-08-27 09:37 ./usr/share/doc/libpam-p11/AuthorsAndCredits.html -rw-r--r-- root/root 324 2008-08-27 09:29 ./usr/share/doc/libpam-p11/NEWS.gz -rw-r--r-- root/root 16072 2008-02-28 10:34 ./usr/share/doc/libpam-p11/trac.css pam-p11_0.1.5-1build2_armel.changes: Format: 1.8 Date: Sun, 22 May 2011 18:00:44 +0100 Source: pam-p11 Binary: libpam-p11 Architecture: armel Version: 0.1.5-1build2 Distribution: oneiric Urgency: low Maintainer: Ubuntu/armel Build Daemon Changed-By: Colin Watson Description: libpam-p11 - PAM module for using PKCS#11 smart cards Changes: pam-p11 (0.1.5-1build2) oneiric; urgency=low . * Rebuild for libp11-2. Checksums-Sha1: 4d61e066aef3f4bcfa0d0b94b7d0a19fc82e368b 19686 libpam-p11_0.1.5-1build2_armel.deb Checksums-Sha256: 6bae5d517a97f4def404e392cf26a634dc86779ba98d73b33da681a038f904d0 19686 libpam-p11_0.1.5-1build2_armel.deb Files: 7ad582e3055127cccfb8bd1d0a6ead68 19686 admin optional libpam-p11_0.1.5-1build2_armel.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/pam-p11-0.1.5 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge groff-base libhttp-message-perl mime-support m4 gettext file zlib1g-dev libhtml-parser-perl intltool libhttp-cookies-perl libwww-perl liburi-perl libhtml-tree-perl autotools-dev po-debconf libnet-http-perl dh-translations libxml-parser-perl libcroco3 libp11-2 libhtml-tagset-perl libxml2 libpopt0 pkg-config automake python-scour libhttp-date-perl man-db libfile-listing-perl libencode-locale-perl intltool-debian libhttp-negotiate-perl python2.7 cdbs libpam0g-dev html2text libwww-robotrules-perl gettext-base libltdl-dev debhelper libunistring0 python libp11-dev libmagic1 libpipeline1 libexpat1 libltdl7 libssl-dev libsqlite3-0 bsdmainutils fdupes liblwp-mediatypes-perl autoconf (Reading database ... 16905 files and directories currently installed.) Removing cdbs ... Removing libpam0g-dev ... Removing libltdl-dev ... Removing libp11-dev ... Removing libssl-dev ... Removing fdupes ... Removing zlib1g-dev ... Removing dh-translations ... Removing libp11-2 ... Purging configuration files for libp11-2 ... Removing pkg-config ... Removing python-scour ... Removing debhelper ... Removing python ... Purging configuration files for python ... Removing libltdl7 ... Purging configuration files for libltdl7 ... Removing intltool ... Removing po-debconf ... Removing libxml-parser-perl ... Removing libpopt0 ... Purging configuration files for libpopt0 ... Removing automake ... Removing man-db ... Purging configuration files for man-db ... Removing catpages as well as /var/cache/man hierarchy. Removing intltool-debian ... Removing python2.7 ... Purging configuration files for python2.7 ... Removing html2text ... Purging configuration files for html2text ... Removing libpipeline1 ... Purging configuration files for libpipeline1 ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing libsqlite3-0 ... Purging configuration files for libsqlite3-0 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing autoconf ... Purging configuration files for autoconf ... Removing groff-base ... Purging configuration files for groff-base ... Removing mime-support ... Purging configuration files for mime-support ... Removing m4 ... Removing gettext ... Removing file ... Removing libwww-perl ... Removing libhtml-tree-perl ... Removing autotools-dev ... Removing libnet-http-perl ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libfile-listing-perl ... Removing libhttp-negotiate-perl ... Removing libwww-robotrules-perl ... Removing gettext-base ... Removing libunistring0 ... Purging configuration files for libunistring0 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libhttp-cookies-perl ... Removing libhttp-message-perl ... Removing libhtml-parser-perl ... Removing liburi-perl ... Removing libhtml-tagset-perl ... Removing libhttp-date-perl ... Removing libencode-locale-perl ... Removing liblwp-mediatypes-perl ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20110522-1716 Build needed 00:04:11, 2604k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '78a070e9ad89c3e1ada66287f2bb0b70903878ab'] Scanning for processes to kill in build /home/buildd/build-78a070e9ad89c3e1ada66287f2bb0b70903878ab/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '78a070e9ad89c3e1ada66287f2bb0b70903878ab'] Unmounting chroot for build 78a070e9ad89c3e1ada66287f2bb0b70903878ab... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '78a070e9ad89c3e1ada66287f2bb0b70903878ab'] Removing build 78a070e9ad89c3e1ada66287f2bb0b70903878ab