[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-23-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC 2010 (Ubuntu 2.6.32-23.37-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37856000 - 37fef8ff [ 0.000000] Allocated new RAMDISK: 008e0000 - 010798ff [ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef8fe to 008e0000 - 010798fe [ 0.000000] ACPI: RSDP 000f7300 00014 (v00 AWARD ) [ 0.000000] ACPI: RSDT 7fff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 7fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 7fff30c0 03A02 (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7fff0000 00040 [ 0.000000] ACPI: APIC 7fff6b00 00068 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008dc000 - 00008df06e] BRK ==> [00008dc000 - 00008df06e] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e0000 - 00010798ff] NEW RAMDISK ==> [00008e0000 - 00010798ff] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f5990] f5990 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524159 [ 0.000000] free_area_init_node: node 0, pgdat c0798760, node_mem_map c107b200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic root=UUID=99603b40-ea89-415d-9c30-d500db008607 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10485120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0) [ 0.000000] Memory: 2052116k/2097088k available (4676k kernel code, 43444k reserved, 2118k data, 660k init, 1187784k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591293 - 0xc07a2e88 (2118 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591293 (4676 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3207.060 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6414.12 BogoMIPS (lpj=12828240) [ 0.004030] Security Framework initialized [ 0.004060] AppArmor: AppArmor initialized [ 0.004070] Mount-cache hash table entries: 512 [ 0.004258] Initializing cgroup subsys ns [ 0.004265] Initializing cgroup subsys cpuacct [ 0.004271] Initializing cgroup subsys memory [ 0.004280] Initializing cgroup subsys devices [ 0.004283] Initializing cgroup subsys freezer [ 0.004287] Initializing cgroup subsys net_cls [ 0.004321] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004325] CPU: L2 cache: 1024K [ 0.004329] CPU: Physical Processor ID: 0 [ 0.004331] CPU: Processor Core ID: 0 [ 0.004336] mce: CPU supports 4 MCE banks [ 0.004351] CPU0: Thermal monitoring enabled (TM1) [ 0.004358] using mwait in idle threads. [ 0.008008] Performance Events: no PMU driver, software events only. [ 0.008018] Checking 'hlt' instruction... OK. [ 0.027921] ACPI: Core revision 20090903 [ 0.036014] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036020] ftrace: allocating 21776 entries in 43 pages [ 0.044085] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044341] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086574] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04 [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.008000] CPU: L2 cache: 1024K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 0 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.172050] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04 [ 0.172069] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.176028] Brought up 2 CPUs [ 0.176033] Total of 2 processors activated (12829.09 BogoMIPS). [ 0.176363] CPU0 attaching sched-domain: [ 0.176369] domain 0: span 0-1 level SIBLING [ 0.176373] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.176380] domain 1: span 0-1 level MC [ 0.176384] groups: 0-1 (cpu_power = 1178) [ 0.176393] CPU1 attaching sched-domain: [ 0.176395] domain 0: span 0-1 level SIBLING [ 0.176398] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.176405] domain 1: span 0-1 level MC [ 0.176408] groups: 0-1 (cpu_power = 1178) [ 0.176563] devtmpfs: initialized [ 0.176563] regulator: core version 0.5 [ 0.176563] Time: 0:50:18 Date: 07/06/10 [ 0.176563] NET: Registered protocol family 16 [ 0.176563] Trying to unpack rootfs image as initramfs... [ 0.176563] EISA bus registered [ 0.176563] ACPI: bus type pci registered [ 0.200612] PCI: PCI BIOS revision 2.10 entry at 0xfb510, last bus=1 [ 0.200621] PCI: Using configuration type 1 for base access [ 0.202722] bio: create slab at 0 [ 0.203762] ACPI: EC: Look up EC in DSDT [ 0.212542] ACPI: Interpreter enabled [ 0.212559] ACPI: (supports S0 S1 S4 S5) [ 0.212606] ACPI: Using IOAPIC for interrupt routing [ 0.219924] ACPI: No dock devices found. [ 0.220124] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.220215] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.220435] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] [ 0.220446] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] [ 0.220456] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] [ 0.220466] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] [ 0.220476] pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] [ 0.220514] pci 0000:00:02.5: PME# supported from D3cold [ 0.220521] pci 0000:00:02.5: PME# disabled [ 0.220569] pci 0000:00:02.7: reg 10 io port: [0xd000-0xd0ff] [ 0.220580] pci 0000:00:02.7: reg 14 io port: [0xd400-0xd47f] [ 0.220637] pci 0000:00:02.7: supports D1 D2 [ 0.220642] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.220650] pci 0000:00:02.7: PME# disabled [ 0.220685] pci 0000:00:03.0: reg 10 32bit mmio: [0xeb004000-0xeb004fff] [ 0.220762] pci 0000:00:03.1: reg 10 32bit mmio: [0xeb000000-0xeb000fff] [ 0.220832] pci 0000:00:03.2: reg 10 32bit mmio: [0xeb001000-0xeb001fff] [ 0.220912] pci 0000:00:03.3: reg 10 32bit mmio: [0xeb002000-0xeb002fff] [ 0.220971] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.220978] pci 0000:00:03.3: PME# disabled [ 0.221030] pci 0000:00:04.0: reg 10 io port: [0xd800-0xd8ff] [ 0.221041] pci 0000:00:04.0: reg 14 32bit mmio: [0xeb003000-0xeb003fff] [ 0.221075] pci 0000:00:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.221103] pci 0000:00:04.0: supports D1 D2 [ 0.221107] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.221114] pci 0000:00:04.0: PME# disabled [ 0.221164] pci 0000:00:05.0: reg 10 io port: [0xdc00-0xdc07] [ 0.221176] pci 0000:00:05.0: reg 14 io port: [0xe000-0xe003] [ 0.221190] pci 0000:00:05.0: reg 18 io port: [0xe400-0xe407] [ 0.221203] pci 0000:00:05.0: reg 1c io port: [0xe800-0xe803] [ 0.221213] pci 0000:00:05.0: reg 20 io port: [0xec00-0xec0f] [ 0.221251] pci 0000:00:05.0: PME# supported from D3cold [ 0.221257] pci 0000:00:05.0: PME# disabled [ 0.221311] pci 0000:00:0b.0: reg 10 32bit mmio: [0xeb005000-0xeb005fff] [ 0.221370] pci 0000:00:0b.0: supports D1 D2 [ 0.221375] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.221381] pci 0000:00:0b.0: PME# disabled [ 0.221474] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.221485] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] [ 0.221495] pci 0000:01:00.0: reg 18 32bit mmio: [0xe9000000-0xe900ffff] [ 0.221521] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.221554] pci 0000:01:00.0: supports D1 D2 [ 0.221611] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.221626] pci 0000:01:00.1: reg 14 32bit mmio: [0xe9010000-0xe901ffff] [ 0.221680] pci 0000:01:00.1: supports D1 D2 [ 0.221746] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.221753] pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe9ffffff] [ 0.221761] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xe7ffffff] [ 0.221774] pci_bus 0000:00: on NUMA node 0 [ 0.221783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.253551] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15) [ 0.253721] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15) [ 0.253902] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 14 15) [ 0.254079] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15) [ 0.254243] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 14 15) [ 0.254434] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 14 15) [ 0.254604] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 14 15) [ 0.254773] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 14 15) [ 0.255003] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.255010] vgaarb: loaded [ 0.255232] SCSI subsystem initialized [ 0.255397] libata version 3.00 loaded. [ 0.255535] usbcore: registered new interface driver usbfs [ 0.255560] usbcore: registered new interface driver hub [ 0.255609] usbcore: registered new device driver usb [ 0.255861] ACPI: WMI: Mapper loaded [ 0.255865] PCI: Using ACPI for IRQ routing [ 0.256139] NetLabel: Initializing [ 0.256143] NetLabel: domain hash size = 128 [ 0.256147] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.256169] NetLabel: unlabeled traffic allowed by default [ 0.256257] Switching to clocksource tsc [ 0.259514] AppArmor: AppArmor Filesystem Enabled [ 0.259544] pnp: PnP ACPI init [ 0.259632] ACPI: bus type pnp registered [ 0.264230] pnp: PnP ACPI: found 11 devices [ 0.264235] ACPI: ACPI bus type pnp unregistered [ 0.264243] PnPBIOS: Disabled by ACPI PNP [ 0.264263] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 0.264269] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.264275] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.264280] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.264286] system 00:00: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.264293] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.264298] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.264304] system 00:00: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.264309] system 00:00: iomem range 0xffee0000-0xffefffff has been reserved [ 0.264315] system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved [ 0.264321] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.264326] system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.264341] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.264347] system 00:02: ioport range 0x800-0x805 has been reserved [ 0.264352] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.299222] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.299230] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.299238] pci 0000:00:01.0: MEM window: 0xe8000000-0xe9ffffff [ 0.299246] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xe7ffffff [ 0.299268] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.299273] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.299278] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.299283] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe9ffffff] [ 0.299288] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xe7ffffff] [ 0.299356] NET: Registered protocol family 2 [ 0.299540] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.300241] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.301006] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.301519] TCP: Hash tables configured (established 131072 bind 65536) [ 0.301526] TCP reno registered [ 0.301762] NET: Registered protocol family 1 [ 0.383675] pci 0000:01:00.0: Boot video device [ 0.384006] cpufreq-nforce2: No nForce2 chipset. [ 0.384059] Scanning for low memory corruption every 60 seconds [ 0.384249] audit: initializing netlink socket (disabled) [ 0.384272] type=2000 audit(1278377418.383:1): initialized [ 0.395983] highmem bounce pool size: 64 pages [ 0.395993] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.398980] VFS: Disk quotas dquot_6.5.2 [ 0.399115] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.400316] fuse init (API version 7.13) [ 0.400482] msgmni has been set to 1690 [ 0.400890] alg: No test for stdrng (krng) [ 0.400998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.401005] io scheduler noop registered [ 0.401009] io scheduler anticipatory registered [ 0.401016] io scheduler deadline registered [ 0.401104] io scheduler cfq registered (default) [ 0.401296] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.401342] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.401511] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.401518] ACPI: Power Button [PWRB] [ 0.401608] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.401618] ACPI: Sleep Button [FUTS] [ 0.401722] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.401727] ACPI: Power Button [PWRF] [ 0.401808] fan PNP0C0B:00: registered as cooling_device0 [ 0.401819] ACPI: Fan [FAN] (on) [ 0.402248] processor LNXCPU:00: registered as cooling_device1 [ 0.402314] processor LNXCPU:01: registered as cooling_device2 [ 0.406029] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.406049] ACPI: Thermal Zone [THRM] (57 C) [ 0.409069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.409199] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.409772] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.411907] brd: module loaded [ 0.412876] loop: module loaded [ 0.413050] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.413286] pata_sis 0000:00:02.5: version 0.5.2 [ 0.413313] alloc irq_desc for 16 on node -1 [ 0.413317] alloc kstat_irqs on node -1 [ 0.413330] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.413596] scsi0 : pata_sis [ 0.413752] scsi1 : pata_sis [ 0.415194] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14 [ 0.415202] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15 [ 0.415279] isapnp: Scanning for PnP cards... [ 0.415292] alloc irq_desc for 17 on node -1 [ 0.415296] alloc kstat_irqs on node -1 [ 0.415305] pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.415363] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.415936] Fixed MDIO Bus: probed [ 0.415998] PPP generic driver version 2.4.2 [ 0.416086] tun: Universal TUN/TAP device driver, 1.6 [ 0.416090] tun: (C) 1999-2004 Max Krasnyansky [ 0.416241] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.416269] alloc irq_desc for 23 on node -1 [ 0.416273] alloc kstat_irqs on node -1 [ 0.416280] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.416302] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.416357] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.416400] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported [ 0.416419] ehci_hcd 0000:00:03.3: irq 23, io mem 0xeb002000 [ 0.427679] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.427869] usb usb1: configuration #1 chosen from 1 choice [ 0.427919] hub 1-0:1.0: USB hub found [ 0.427935] hub 1-0:1.0: 8 ports detected [ 0.428041] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.428073] alloc irq_desc for 20 on node -1 [ 0.428077] alloc kstat_irqs on node -1 [ 0.428086] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.428107] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.428167] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.428198] ohci_hcd 0000:00:03.0: irq 20, io mem 0xeb004000 [ 0.485818] usb usb2: configuration #1 chosen from 1 choice [ 0.485872] hub 2-0:1.0: USB hub found [ 0.485892] hub 2-0:1.0: 3 ports detected [ 0.485978] alloc irq_desc for 21 on node -1 [ 0.485982] alloc kstat_irqs on node -1 [ 0.485993] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.486017] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.486076] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.486111] ohci_hcd 0000:00:03.1: irq 21, io mem 0xeb000000 [ 0.512759] Freeing initrd memory: 7782k freed [ 0.541842] usb usb3: configuration #1 chosen from 1 choice [ 0.541904] hub 3-0:1.0: USB hub found [ 0.541923] hub 3-0:1.0: 3 ports detected [ 0.542014] alloc irq_desc for 22 on node -1 [ 0.542018] alloc kstat_irqs on node -1 [ 0.542028] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.542056] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 0.542138] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 0.542175] ohci_hcd 0000:00:03.2: irq 22, io mem 0xeb001000 [ 0.588123] ata1.00: ATA-7: Maxtor 6E040L0, NAR61HA0, max UDMA/133 [ 0.588129] ata1.00: 80293248 sectors, multi 16: LBA [ 0.597755] usb usb4: configuration #1 chosen from 1 choice [ 0.597801] hub 4-0:1.0: USB hub found [ 0.597815] hub 4-0:1.0: 2 ports detected [ 0.597896] uhci_hcd: USB Universal Host Controller Interface driver [ 0.598041] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.598045] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.598191] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.598364] mice: PS/2 mouse device common for all mice [ 0.598567] rtc_cmos 00:04: RTC can wake from S4 [ 0.598634] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.598660] rtc0: alarms up to one year, 242 bytes nvram [ 0.598843] device-mapper: uevent: version 1.0.3 [ 0.599032] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.599145] device-mapper: multipath: version 1.1.0 loaded [ 0.599150] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.599343] EISA: Probing bus 0 at eisa.0 [ 0.599352] Cannot allocate resource for EISA slot 1 [ 0.599364] Cannot allocate resource for EISA slot 4 [ 0.599384] EISA: Detected 0 cards. [ 0.599499] cpuidle: using governor ladder [ 0.599503] cpuidle: using governor menu [ 0.600309] TCP cubic registered [ 0.600538] NET: Registered protocol family 10 [ 0.601360] lo: Disabled Privacy Extensions [ 0.601993] NET: Registered protocol family 17 [ 0.602075] Using IPI No-Shortcut mode [ 0.602196] PM: Resume from disk failed. [ 0.602219] registered taskstats version 1 [ 0.602513] Magic number: 2:240:809 [ 0.602610] rtc_cmos 00:04: setting system clock to 2010-07-06 00:50:19 UTC (1278377419) [ 0.602615] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.602618] EDD information not available. [ 0.618596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.623112] ata1.01: ATA-7: ST3160812A, 3.AAD, max UDMA/100 [ 0.623117] ata1.01: 312581808 sectors, multi 16: LBA48 [ 0.636152] ata1.00: configured for UDMA/133 [ 0.722973] ata1.01: configured for UDMA/100 [ 0.739654] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.768946] isapnp: No Plug & Play device found [ 0.769103] scsi 0:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5 [ 0.769277] sd 0:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB) [ 0.769318] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.769364] sd 0:0:0:0: [sda] Write Protect is off [ 0.769372] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.769418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.769531] scsi 0:0:1:0: Direct-Access ATA ST3160812A 3.AA PQ: 0 ANSI: 5 [ 0.769678] sda: [ 0.769749] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.872588] usb 1-1: configuration #1 chosen from 1 choice [ 0.940108] ata2.00: ATAPI: GO-D1600D, VER 0I59, max UDMA/33 [ 0.940151] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33 [ 0.956129] ata2.00: configured for UDMA/33 [ 0.972135] ata2.01: configured for UDMA/33 [ 0.974723] scsi 1:0:0:0: CD-ROM DVDROM GO-D1600D 0I59 PQ: 0 ANSI: 5 [ 0.976456] sr0: scsi3-mmc drive: 16x/48x cd/rw xa/form2 cdda tray [ 0.976460] Uniform CD-ROM driver Revision: 3.20 [ 0.976580] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.976645] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 0.980406] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5 [ 0.991923] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.992024] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 0.992083] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.095697] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 1.226917] usb 1-6: configuration #1 chosen from 1 choice [ 1.588017] usb 3-3: new low speed USB device using ohci_hcd and address 2 [ 1.800574] usb 3-3: configuration #1 chosen from 1 choice [ 2.108017] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 2.330518] usb 2-2: configuration #1 chosen from 1 choice [ 2.893877] sd 0:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.893949] sd 0:0:1:0: [sdb] Write Protect is off [ 2.893953] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.893987] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.894172] sdb: sda1 sda2 < sdb1 [ 2.939918] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.939929] sda5 > [ 2.940304] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.940326] Freeing unused kernel memory: 660k freed [ 2.940955] Write protecting the kernel text: 4680k [ 2.941018] Write protecting the kernel read-only data: 1840k [ 2.966444] udev: starting version 151 [ 3.172295] sis900.c: v1.08.10 Apr. 2 2006 [ 3.172356] alloc irq_desc for 19 on node -1 [ 3.172361] alloc kstat_irqs on node -1 [ 3.172375] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.173321] 0000:00:04.0: Unknown PHY transceiver found at address 0. [ 3.173982] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 3.174643] 0000:00:04.0: Unknown PHY transceiver found at address 2. [ 3.175304] 0000:00:04.0: Unknown PHY transceiver found at address 3. [ 3.175965] 0000:00:04.0: Unknown PHY transceiver found at address 4. [ 3.216984] 0000:00:04.0: Unknown PHY transceiver found at address 5. [ 3.217672] 0000:00:04.0: Unknown PHY transceiver found at address 6. [ 3.218331] 0000:00:04.0: Unknown PHY transceiver found at address 7. [ 3.218989] 0000:00:04.0: Unknown PHY transceiver found at address 8. [ 3.219649] 0000:00:04.0: Unknown PHY transceiver found at address 9. [ 3.220318] 0000:00:04.0: Unknown PHY transceiver found at address 10. [ 3.220978] 0000:00:04.0: Unknown PHY transceiver found at address 11. [ 3.231036] 0000:00:04.0: Unknown PHY transceiver found at address 12. [ 3.231817] 0000:00:04.0: Unknown PHY transceiver found at address 13. [ 3.232487] 0000:00:04.0: Unknown PHY transceiver found at address 14. [ 3.233203] 0000:00:04.0: Unknown PHY transceiver found at address 15. [ 3.233889] 0000:00:04.0: Unknown PHY transceiver found at address 16. [ 3.234548] 0000:00:04.0: Unknown PHY transceiver found at address 17. [ 3.235208] 0000:00:04.0: Unknown PHY transceiver found at address 18. [ 3.235867] 0000:00:04.0: Unknown PHY transceiver found at address 19. [ 3.236526] 0000:00:04.0: Unknown PHY transceiver found at address 20. [ 3.237196] 0000:00:04.0: Unknown PHY transceiver found at address 21. [ 3.237855] 0000:00:04.0: Unknown PHY transceiver found at address 22. [ 3.238544] 0000:00:04.0: Unknown PHY transceiver found at address 23. [ 3.239205] 0000:00:04.0: Unknown PHY transceiver found at address 24. [ 3.239956] 0000:00:04.0: Unknown PHY transceiver found at address 25. [ 3.240706] 0000:00:04.0: Unknown PHY transceiver found at address 26. [ 3.241447] usbcore: registered new interface driver hiddev [ 3.244085] FDC 0 is a post-1991 82077 [ 3.244479] usbcore: registered new interface driver usbhid [ 3.244650] usbhid: v2.6:USB HID core driver [ 3.248376] 0000:00:04.0: Unknown PHY transceiver found at address 27. [ 3.249035] 0000:00:04.0: Unknown PHY transceiver found at address 28. [ 3.249693] 0000:00:04.0: Unknown PHY transceiver found at address 29. [ 3.250351] 0000:00:04.0: Unknown PHY transceiver found at address 30. [ 3.251016] 0000:00:04.0: Unknown PHY transceiver found at address 31. [ 3.258170] Initializing USB Mass Storage driver... [ 3.258336] scsi2 : SCSI emulation for USB Mass Storage devices [ 3.258773] usb-storage: device found at 2 [ 3.258776] usb-storage: waiting for device to settle before scanning [ 3.258813] scsi3 : SCSI emulation for USB Mass Storage devices [ 3.259044] usbcore: registered new interface driver usb-storage [ 3.259049] USB Mass Storage support registered. [ 3.259566] usb-storage: device found at 4 [ 3.259569] usb-storage: waiting for device to settle before scanning [ 3.271782] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-3/3-3:1.0/input/input5 [ 3.271949] a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:03.1-3/input0 [ 3.274203] 0000:00:04.0: Using transceiver found at address 1 as default [ 3.279810] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:11:5b:15:60:74 [ 3.279867] sata_sis 0000:00:05.0: version 1.0 [ 3.279895] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.279904] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode [ 3.280376] scsi4 : sata_sis [ 3.280523] scsi5 : sata_sis [ 3.280609] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xe000 bmdma 0xec00 irq 17 [ 3.280618] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe800 bmdma 0xec08 irq 17 [ 3.280749] ohci1394 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.338166] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[eb005000-eb0057ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 3.487665] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.487671] EXT4-fs (sda1): write access will be enabled during recovery [ 3.562476] EXT4-fs (sda1): recovery complete [ 3.564468] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.610775] ata3: SATA link down (SStatus 0 SControl 300) [ 3.938759] ata4: SATA link down (SStatus 0 SControl 300) [ 4.620288] ieee1394: Host added: ID:BUS[0-00:1023] GUID[30bd0502000011de] [ 8.256377] usb-storage: device scan complete [ 8.256705] usb-storage: device scan complete [ 8.256834] scsi 2:0:0:0: Direct-Access HP Photosmart D5300 1.00 PQ: 0 ANSI: 5 [ 8.257484] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 8.257594] scsi 3:0:0:0: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 [ 8.258214] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 8.258944] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 8.259926] sd 3:0:0:0: [sdd] Attached SCSI removable disk [ 14.591059] udev: starting version 151 [ 14.626953] Adding 2241028k swap on /dev/sda5. Priority:-1 extents:1 across:2241028k [ 15.006710] type=1505 audit(1278377433.901:2): operation="profile_load" pid=534 name="/sbin/dhclient3" [ 15.007531] type=1505 audit(1278377433.901:3): operation="profile_load" pid=534 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.007956] type=1505 audit(1278377433.901:4): operation="profile_load" pid=534 name="/usr/lib/connman/scripts/dhclient-script" [ 15.769468] lp: driver loaded but no devices found [ 15.794968] Linux agpgart interface v0.103 [ 15.886711] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648] [ 15.902677] parport_pc 00:09: reported by Plug and Play ACPI [ 15.902768] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 15.907552] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 15.923383] ppdev: user-space parallel port driver [ 16.001466] lp0: using parport0 (interrupt-driven). [ 16.021084] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.040585] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6811 [ 16.040642] usbcore: registered new interface driver usblp [ 16.074534] usbcore: registered new interface driver usbserial [ 16.074563] USB Serial support registered for generic [ 16.074682] usbcore: registered new interface driver usbserial_generic [ 16.074687] usbserial: USB Serial Driver core [ 16.239887] [drm] Initialized drm 1.1.0 20060810 [ 16.274164] USB Serial support registered for GSM modem (1-port) [ 16.274325] option 1-6:1.0: GSM modem (1-port) converter detected [ 16.277899] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0 [ 16.277960] option 1-6:1.1: GSM modem (1-port) converter detected [ 16.278462] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1 [ 16.278521] option 1-6:1.3: GSM modem (1-port) converter detected [ 16.280265] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2 [ 16.280320] option 1-6:1.4: GSM modem (1-port) converter detected [ 16.282280] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB3 [ 16.282474] usbcore: registered new interface driver option [ 16.282479] option: v0.7.2:USB Driver for GSM modems [ 16.407032] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 16.540987] [drm] radeon defaulting to kernel modesetting. [ 16.540993] [drm] radeon kernel modesetting enabled. [ 16.541072] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.543574] [drm] radeon: Initializing kernel modesetting. [ 16.544261] [drm] register mmio base: 0xE9000000 [ 16.544266] [drm] register mmio size: 65536 [ 16.544569] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 16.544591] [drm] Generation 1 PCI interface in multifunction mode [ 16.544595] [drm] Limiting VRAM to one aperture [ 16.544606] agpgart-sis 0000:00:00.0: AGP 3.5 bridge [ 16.544637] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 16x mode [ 16.544645] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover [ 16.560088] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 16x mode [ 16.560098] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.1 into 16x mode [ 16.560106] [drm] radeon: VRAM 128M [ 16.560109] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 16.560111] [drm] radeon: GTT 128M [ 16.560114] [drm] radeon: GTT from 0xD0000000 to 0xD7FFFFFF [ 16.560158] [drm] radeon: irq initialized. [ 16.560561] [drm] Detected VRAM RAM=128M, BAR=128M [ 16.560566] [drm] RAM width 128bits DDR [ 16.560687] [TTM] Zone kernel: Available graphics memory: 436926 kiB. [ 16.560690] [TTM] Zone highmem: Available graphics memory: 1030818 kiB. [ 16.560711] [drm] radeon: 128M of VRAM memory ready [ 16.560714] [drm] radeon: 128M of GTT memory ready. [ 16.560952] [drm] radeon: cp idle (0x02000603) [ 16.561012] [drm] Loading R200 Microcode [ 16.561018] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 16.638648] [drm] radeon: ring at 0x00000000D0000000 [ 16.638669] [drm] ring test succeeded in 0 usecs [ 16.644027] [drm] radeon: ib pool ready. [ 16.644130] [drm] ib test succeeded in 0 usecs [ 16.644633] [drm] Default TV standard: PAL [ 16.644638] [drm] 27.000000000 MHz TV ref clk [ 16.644641] [drm] No TV DAC info found in BIOS [ 16.644647] [drm] DFP table revision: 3 [ 16.645113] [drm] Default TV standard: PAL [ 16.645117] [drm] 27.000000000 MHz TV ref clk [ 16.645333] [drm] Radeon Display Connectors [ 16.645338] [drm] Connector 0: [ 16.645341] [drm] VGA [ 16.645346] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 16.645349] [drm] Encoders: [ 16.645352] [drm] CRT1: INTERNAL_DAC1 [ 16.645355] [drm] Connector 1: [ 16.645358] [drm] DVI-I [ 16.645361] [drm] HPD1 [ 16.645365] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 16.645368] [drm] Encoders: [ 16.645371] [drm] CRT2: INTERNAL_DAC2 [ 16.645374] [drm] DFP1: INTERNAL_TMDS1 [ 16.645378] [drm] Connector 2: [ 16.645380] [drm] S-video [ 16.645383] [drm] Encoders: [ 16.645386] [drm] TV1: INTERNAL_DAC2 [ 16.791561] [drm] fb mappable at 0xD8040000 [ 16.791566] [drm] vram apper at 0xD8000000 [ 16.791568] [drm] size 5242880 [ 16.791570] [drm] fb depth is 24 [ 16.791572] [drm] pitch is 5120 [ 16.791717] fb0: radeondrmfb frame buffer device [ 16.791721] registered panic notifier [ 16.791734] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 16.879662] alloc irq_desc for 18 on node -1 [ 16.879669] alloc kstat_irqs on node -1 [ 16.879680] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 16.881510] vga16fb: initializing [ 16.881518] vga16fb: mapped to 0xc00a0000 [ 16.881527] vga16fb: not registering due to another framebuffer present [ 17.040246] Console: switching to colour frame buffer device 160x64 [ 17.208049] intel8x0_measure_ac97_clock: measured 53544 usecs (2576 samples) [ 17.208056] intel8x0: clocking to 48000 [ 17.637481] type=1505 audit(1278377436.534:5): operation="profile_load" pid=808 name="/usr/share/gdm/guest-session/Xsession" [ 17.650743] type=1505 audit(1278377436.546:6): operation="profile_replace" pid=812 name="/sbin/dhclient3" [ 17.651544] type=1505 audit(1278377436.546:7): operation="profile_replace" pid=812 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.651982] type=1505 audit(1278377436.546:8): operation="profile_replace" pid=812 name="/usr/lib/connman/scripts/dhclient-script" [ 17.665641] type=1505 audit(1278377436.562:9): operation="profile_load" pid=816 name="/usr/bin/evince" [ 17.694331] type=1505 audit(1278377436.590:10): operation="profile_load" pid=816 name="/usr/bin/evince-previewer" [ 17.708672] eth0: Media Link Off [ 17.708988] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.710190] type=1505 audit(1278377436.606:11): operation="profile_load" pid=816 name="/usr/bin/evince-thumbnailer" [ 18.632133] CPU0 attaching NULL sched-domain. [ 18.632145] CPU1 attaching NULL sched-domain. [ 18.660133] CPU0 attaching sched-domain: [ 18.660144] domain 0: span 0-1 level SIBLING [ 18.660150] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 18.660162] domain 1: span 0-1 level MC [ 18.660168] groups: 0-1 (cpu_power = 1178) [ 18.660180] CPU1 attaching sched-domain: [ 18.660184] domain 0: span 0-1 level SIBLING [ 18.660189] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 18.660199] domain 1: span 0-1 level MC [ 18.660204] groups: 0-1 (cpu_power = 1178) [ 19.429218] usb 1-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 21.441109] CPU0 attaching NULL sched-domain. [ 21.441121] CPU1 attaching NULL sched-domain. [ 21.464129] CPU0 attaching sched-domain: [ 21.464137] domain 0: span 0-1 level SIBLING [ 21.464143] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 21.464156] domain 1: span 0-1 level MC [ 21.464161] groups: 0-1 (cpu_power = 1178) [ 21.464173] CPU1 attaching sched-domain: [ 21.464177] domain 0: span 0-1 level SIBLING [ 21.464182] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 21.464193] domain 1: span 0-1 level MC [ 21.464198] groups: 0-1 (cpu_power = 1178) [ 26.735216] PPP BSD Compression module registered [ 26.762186] PPP Deflate Compression module registered [14536.358536] __ratelimit: 21 callbacks suppressed [14536.358542] civclient-gtk[4110]: segfault at 84 ip 0047ac26 sp bfbe5b40 error 4 in libglib-2.0.so.0.2400.1[456000+c8000]