[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-22-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #33-Ubuntu SMP Thu May 16 15:17:59 UTC 2013 (Ubuntu 3.8.0-22.33-generic 3.8.11) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdaa0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdaa1000-0x00000000bdaa6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdaa7000-0x00000000bdbcffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdbd0000-0x00000000bdc0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdc0f000-0x00000000bdd08fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdd09000-0x00000000bdf0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdf0f000-0x00000000bdf17fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf18000-0x00000000bdf1efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdf1f000-0x00000000bdf62fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf63000-0x00000000bdf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bdf9f000-0x00000000bdfe1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdfe2000-0x00000000bdffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Dell Inc. Studio 1450/0D886T, BIOS A04 12/01/2009 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f7590-0x000f759f] mapped at [c00f7590] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff] [ 0.000000] [mem 0x00000000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x379fffff] page 2M [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: [mem 0x36170000-0x370affff] [ 0.000000] ACPI: RSDP 000f74e0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT bdff5ede 0006C (v01 DELL FX09 06040000 LTP 00000000) [ 0.000000] ACPI: FACP bdfe6000 000F4 (v03 DELL M09 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT bdfe7000 08DB2 (v02 DELL M09 06040000 INTL 20050624) [ 0.000000] ACPI: FACS bdf9efc0 00040 [ 0.000000] ACPI: HPET bdffee8c 00038 (v01 DELL M09 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG bdffeec4 0003C (v01 DELL M09 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC bdffef00 00068 (v01 DELL M09 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT bdffef68 00028 (v01 DELL M09 06040000 LTP 00000001) [ 0.000000] ACPI: OSFR bdffef90 00070 (v01 DELL DELL 06040000 ASL 00000061) [ 0.000000] ACPI: SSDT bdfe5000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT bdfe4000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT bdfe3000 0020F (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4228MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x3fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xbdaa0fff] [ 0.000000] node 0: [mem 0xbdaa7000-0xbdbcffff] [ 0.000000] node 0: [mem 0xbdc0f000-0xbdd08fff] [ 0.000000] node 0: [mem 0xbdf0f000-0xbdf17fff] [ 0.000000] node 0: [mem 0xbdf1f000-0xbdf62fff] [ 0.000000] node 0: [mem 0xbdf9f000-0xbdfe1fff] [ 0.000000] node 0: [mem 0xbdfff000-0xbdffffff] [ 0.000000] node 0: [mem 0x00000000-0x3fffffff] [ 0.000000] On node 0 totalpages: 1039586 [ 0.000000] free_area_init_node: node 0, pgdat c18f6100, node_mem_map f3970200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8457 pages used for memmap [ 0.000000] HighMem zone: 802894 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] e820: [mem 0xbe000000-0xffffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bce000 s35008 r0 d22336 u57344 [ 0.000000] pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029345 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-22-generic root=UUID=eb2c06dd-c60f-485b-8ad3-145d6538cd00 ro persistent quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 10485632 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00140000) [ 0.000000] Memory: 4079548k/5242880k available (6251k kernel code, 78796k reserved, 2973k data, 788k init, 3245404k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc1903000 - 0xc19c8000 ( 788 kB) [ 0.000000] .data : 0xc161afb0 - 0xc1902440 (2973 kB) [ 0.000000] .text : 0xc1000000 - 0xc161afb0 (6251 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f3408000 soft=f340a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2527.114 MHz processor [ 0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.22 BogoMIPS (lpj=10108456) [ 0.004004] pid_max: default: 32768 minimum: 301 [ 0.004030] Security Framework initialized [ 0.004038] AppArmor: AppArmor initialized [ 0.004040] Yama: becoming mindful. [ 0.004081] Mount-cache hash table entries: 512 [ 0.004263] Initializing cgroup subsys cpuacct [ 0.004265] Initializing cgroup subsys memory [ 0.004272] Initializing cgroup subsys devices [ 0.004273] Initializing cgroup subsys freezer [ 0.004275] Initializing cgroup subsys blkio [ 0.004277] Initializing cgroup subsys perf_event [ 0.004280] Initializing cgroup subsys hugetlb [ 0.004305] CPU: Physical Processor ID: 0 [ 0.004307] CPU: Processor Core ID: 0 [ 0.004309] mce: CPU supports 6 MCE banks [ 0.004315] CPU0: Thermal monitoring handled by SMI [ 0.004318] process: using mwait in idle threads [ 0.004324] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.004324] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.004324] tlb_flushall_shift: -1 [ 0.004575] Freeing SMP alternatives: 24k freed [ 0.009378] ACPI: Core revision 20121018 [ 0.016010] ftrace: allocating 26119 entries in 52 pages [ 0.024078] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024482] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065395] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz (fam: 06, model: 17, stepping: 0a) [ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.068000] ... version: 2 [ 0.068000] ... bit width: 40 [ 0.068000] ... generic registers: 2 [ 0.068000] ... value mask: 000000ffffffffff [ 0.068000] ... max period: 000000007fffffff [ 0.068000] ... fixed-purpose events: 3 [ 0.068000] ... event mask: 0000000700000003 [ 0.068000] CPU 1 irqstacks, hard=f34d8000 soft=f34da000 [ 0.068000] smpboot: Booting Node 0, Processors #1 OK [ 0.008000] Initializing CPU#1 [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.078135] Brought up 2 CPUs [ 0.078140] smpboot: Total of 2 processors activated (10108.45 BogoMIPS) [ 0.078227] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.080039] devtmpfs: initialized [ 0.080218] EVM: security.selinux [ 0.080220] EVM: security.SMACK64 [ 0.080221] EVM: security.capability [ 0.080235] PM: Registering ACPI NVS region [mem 0xbdf63000-0xbdf9efff] (245760 bytes) [ 0.081031] regulator-dummy: no parameters [ 0.081082] NET: Registered protocol family 16 [ 0.081233] EISA bus registered [ 0.081334] ACPI: bus type pci registered [ 0.081395] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.081397] PCI: not using MMCONFIG [ 0.083197] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.083395] PCI: PCI BIOS revision 3.00 entry at 0xfddf2, last bus=8 [ 0.083396] PCI: Using configuration type 1 for base access [ 0.083515] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.083516] mtrr: probably your BIOS does not setup all CPUs. [ 0.083518] mtrr: corrected configuration. [ 0.084728] bio: create slab at 0 [ 0.084728] ACPI: Added _OSI(Module Device) [ 0.084728] ACPI: Added _OSI(Processor Device) [ 0.084728] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.084728] ACPI: Added _OSI(Processor Aggregator Device) [ 0.084728] ACPI: EC: Look up EC in DSDT [ 0.088021] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.092303] ACPI: SSDT bdf1ac20 002A9 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.092672] ACPI: Dynamic OEM Table Load: [ 0.092674] ACPI: SSDT (null) 002A9 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.092798] ACPI: SSDT bdf18620 005C5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.093149] ACPI: Dynamic OEM Table Load: [ 0.093151] ACPI: SSDT (null) 005C5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.093162] ACPI: SSDT bdf19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.093162] ACPI: Dynamic OEM Table Load: [ 0.093162] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.096063] ACPI: SSDT bdf19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.096427] ACPI: Dynamic OEM Table Load: [ 0.096430] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.316025] ACPI: EC: GPE storm detected(10 GPEs), transactions will use polling mode [ 0.360052] ACPI: Interpreter enabled [ 0.360060] ACPI: (supports S0 S3 S4 S5) [ 0.360078] ACPI: Using IOAPIC for interrupt routing [ 0.360096] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.360860] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.360861] PCI: Using MMCONFIG for extended config space [ 0.364375] ACPI: Power Resource [FN00] (off) [ 0.364458] ACPI: Power Resource [FN01] (off) [ 0.364733] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.364733] ACPI: No dock devices found. [ 0.364733] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.364733] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.364733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.365148] PCI host bridge to bus 0000:00 [ 0.365152] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.365154] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.365157] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.365159] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.365161] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.365163] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.365165] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.365167] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 0.365170] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.365179] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.365200] DMAR: Forcing write-buffer flush capability [ 0.365201] DMAR: Disabling IOMMU for graphics on this chipset [ 0.365227] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400 [ 0.365269] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.365321] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.365381] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f] [ 0.365452] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.365524] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f] [ 0.365610] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.365684] pci 0000:00:1a.2: reg 20: [io 0x1840-0x185f] [ 0.365777] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.365805] pci 0000:00:1a.7: reg 10: [mem 0xfc304800-0xfc304bff] [ 0.365924] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.365958] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.365980] pci 0000:00:1b.0: reg 10: [mem 0xfc300000-0xfc303fff 64bit] [ 0.366078] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.366108] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.366209] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.366240] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.366340] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.366372] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.366473] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.366513] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.366588] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f] [ 0.366673] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.366731] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f] [ 0.366800] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.366856] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf] [ 0.366937] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.366963] pci 0000:00:1d.7: reg 10: [mem 0xfc304c00-0xfc304fff] [ 0.367079] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.367106] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.368069] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.368232] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.368259] pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7] [ 0.368270] pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7] [ 0.368281] pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef] [ 0.368292] pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3] [ 0.368303] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df] [ 0.368314] pci 0000:00:1f.2: reg 24: [mem 0xfc304000-0xfc3047ff] [ 0.368382] pci 0000:00:1f.2: PME# supported from D3hot [ 0.368407] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.368428] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit] [ 0.368458] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] [ 0.368531] pci 0000:01:00.0: [1002:9553] type 00 class 0x030000 [ 0.368543] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.368551] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff] [ 0.368559] pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfc00ffff] [ 0.368585] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.368620] pci 0000:01:00.0: supports D1 D2 [ 0.368640] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300 [ 0.368651] pci 0000:01:00.1: reg 10: [mem 0xfc010000-0xfc013fff] [ 0.368720] pci 0000:01:00.1: supports D1 D2 [ 0.376011] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.376015] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.376018] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff] [ 0.376022] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.376263] pci 0000:02:00.0: [14e4:1698] type 00 class 0x020000 [ 0.376294] pci 0000:02:00.0: reg 10: [mem 0xf6000000-0xf600ffff 64bit] [ 0.376465] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.384170] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.384175] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.384180] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.384187] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.384243] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 0.384248] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.384252] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.384259] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.384348] pci 0000:06:00.0: [8086:4232] type 00 class 0x028000 [ 0.384388] pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa001fff 64bit] [ 0.384580] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.392021] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 0.392025] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.392030] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 0.392037] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.392119] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode) [ 0.392132] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.392135] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.392137] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.392139] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.392141] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.392144] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.392146] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.392148] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.392175] pci_bus 0000:00: on NUMA node 0 [ 0.392183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.392230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.392360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.392405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.392441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.392493] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.392495] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.393471] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.393518] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.393563] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.393608] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.393653] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.393697] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.393741] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.393787] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.393865] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.393865] vgaarb: loaded [ 0.393865] vgaarb: bridge control possible 0000:01:00.0 [ 0.393865] SCSI subsystem initialized [ 0.393865] ACPI: bus type scsi registered [ 0.396014] libata version 3.00 loaded. [ 0.396035] ACPI: bus type usb registered [ 0.396053] usbcore: registered new interface driver usbfs [ 0.396062] usbcore: registered new interface driver hub [ 0.396067] usbcore: registered new device driver usb [ 0.396067] PCI: Using ACPI for IRQ routing [ 0.396332] PCI: pci_cache_line_size set to 64 bytes [ 0.396412] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.396414] e820: reserve RAM buffer [mem 0xbdaa1000-0xbfffffff] [ 0.396417] e820: reserve RAM buffer [mem 0xbdbd0000-0xbfffffff] [ 0.396421] e820: reserve RAM buffer [mem 0xbdd09000-0xbfffffff] [ 0.396423] e820: reserve RAM buffer [mem 0xbdf18000-0xbfffffff] [ 0.396426] e820: reserve RAM buffer [mem 0xbdf63000-0xbfffffff] [ 0.396428] e820: reserve RAM buffer [mem 0xbdfe2000-0xbfffffff] [ 0.396430] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff] [ 0.396509] NetLabel: Initializing [ 0.396511] NetLabel: domain hash size = 128 [ 0.396512] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.396521] NetLabel: unlabeled traffic allowed by default [ 0.396532] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.396532] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.396532] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.398115] Switching to clocksource hpet [ 0.403066] AppArmor: AppArmor Filesystem Enabled [ 0.403092] pnp: PnP ACPI init [ 0.403105] ACPI: bus type pnp registered [ 0.403197] pnp 00:00: [dma 4] [ 0.403224] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.403249] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.403353] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.403357] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.403395] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.403450] system 00:04: [io 0x0910-0x0917] has been reserved [ 0.403453] system 00:04: [io 0x0480-0x048f] has been reserved [ 0.403456] system 00:04: [io 0x0900-0x0903] has been reserved [ 0.403458] system 00:04: [io 0xffff] has been reserved [ 0.403461] system 00:04: [io 0x1000-0x107f] has been reserved [ 0.403463] system 00:04: [io 0x0400-0x047f] has been reserved [ 0.403466] system 00:04: [io 0x1180-0x11ff] has been reserved [ 0.403468] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.403471] system 00:04: [io 0xfe00] has been reserved [ 0.403474] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.403504] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.403540] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.403568] pnp 00:07: Plug and Play ACPI device, IDs DLL02e8 PNP0f13 (active) [ 0.403716] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.403719] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.403721] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.403724] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.403727] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.403729] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.403732] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.403735] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.403869] pnp: PnP ACPI: found 9 devices [ 0.403871] ACPI: ACPI bus type pnp unregistered [ 0.403874] PnPBIOS: Disabled by ACPI PNP [ 0.440405] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit] [ 0.440420] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc020000-0xfc03ffff pref] [ 0.440422] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.440425] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.440429] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff] [ 0.440432] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.440437] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.440440] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.440445] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.440450] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.440457] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 0.440460] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.440466] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.440471] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.440478] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 0.440481] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.440487] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 0.440492] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.440499] pci 0000:00:1e.0: PCI bridge to [bus 08] [ 0.440546] pci 0000:00:1e.0: setting latency timer to 64 [ 0.440550] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.440552] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.440554] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.440557] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.440559] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.440561] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff] [ 0.440563] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff] [ 0.440565] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.440568] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.440570] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] [ 0.440572] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.440574] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.440577] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.440579] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.440581] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.440583] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.440585] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.440588] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff] [ 0.440590] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.440592] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.440594] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 0.440596] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 0.440598] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 0.440600] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.440602] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.440604] pci_bus 0000:08: resource 9 [mem 0x000e0000-0x000e3fff] [ 0.440607] pci_bus 0000:08: resource 10 [mem 0xc0000000-0xdfffffff] [ 0.440609] pci_bus 0000:08: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.440639] NET: Registered protocol family 2 [ 0.440780] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.440806] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.440832] TCP: Hash tables configured (established 8192 bind 8192) [ 0.440858] TCP: reno registered [ 0.440861] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.440869] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.440915] NET: Registered protocol family 1 [ 0.441265] pci 0000:01:00.0: Boot video device [ 0.441277] PCI: CLS 64 bytes, default 64 [ 0.441313] Trying to unpack rootfs image as initramfs... [ 0.714834] Freeing initrd memory: 15616k freed [ 0.720822] Simple Boot Flag at 0x36 set to 0x1 [ 0.721106] Initialise module verification [ 0.721146] audit: initializing netlink socket (disabled) [ 0.721160] type=2000 audit(1370054953.720:1): initialized [ 0.741103] bounce pool size: 64 pages [ 0.741116] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.742735] VFS: Disk quotas dquot_6.5.2 [ 0.742782] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.743297] fuse init (API version 7.20) [ 0.743376] msgmni has been set to 1659 [ 0.743736] Key type asymmetric registered [ 0.743738] Asymmetric key parser 'x509' registered [ 0.743770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.743799] io scheduler noop registered [ 0.743802] io scheduler deadline registered (default) [ 0.743809] io scheduler cfq registered [ 0.743938] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.744051] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.744168] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.744286] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.744372] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.744386] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.744440] intel_idle: does not run on family 6 model 23 [ 0.744520] ACPI: AC Adapter [ADP1] (on-line) [ 0.744580] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.744594] ACPI: Lid Switch [LID0] [ 0.744626] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.744631] ACPI: Power Button [PWRB] [ 0.744667] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.744670] ACPI: Power Button [PWRF] [ 0.744728] ACPI: Fan [FAN0] (off) [ 0.744757] ACPI: Fan [FAN1] (off) [ 0.744805] ACPI: Requesting acpi_cpufreq [ 0.746806] Monitor-Mwait will be used to enter C-1 state [ 0.746811] Monitor-Mwait will be used to enter C-2 state [ 0.746814] Monitor-Mwait will be used to enter C-3 state [ 0.746817] tsc: Marking TSC unstable due to TSC halts in idle [ 0.746827] ACPI: acpi_idle registered with cpuidle [ 0.750221] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.750224] ACPI: Thermal Zone [TZ01] (33 C) [ 0.750250] GHES: HEST is not enabled! [ 0.750273] ACPI: Battery Slot [BAT1] (battery absent) [ 0.750293] isapnp: Scanning for PnP cards... [ 0.750327] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.751558] Linux agpgart interface v0.103 [ 0.752852] brd: module loaded [ 0.753461] loop: module loaded [ 0.753812] libphy: Fixed MDIO Bus: probed [ 0.753878] tun: Universal TUN/TAP device driver, 1.6 [ 0.753880] tun: (C) 1999-2004 Max Krasnyansky [ 0.753911] PPP generic driver version 2.4.2 [ 0.753941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.753943] ehci-pci: EHCI PCI platform driver [ 0.753967] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 0.753971] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.753977] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.753992] ehci-pci 0000:00:1a.7: debug port 1 [ 0.757890] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.757910] ehci-pci 0000:00:1a.7: irq 19, io mem 0xfc304800 [ 0.768021] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.768057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.768059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.768062] usb usb1: Product: EHCI Host Controller [ 0.768064] usb usb1: Manufacturer: Linux 3.8.0-22-generic ehci_hcd [ 0.768066] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.768152] hub 1-0:1.0: USB hub found [ 0.768158] hub 1-0:1.0: 6 ports detected [ 0.768322] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 0.768325] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.768330] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.768343] ehci-pci 0000:00:1d.7: debug port 1 [ 0.772235] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.772252] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfc304c00 [ 0.784022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.784035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.784037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.784039] usb usb2: Product: EHCI Host Controller [ 0.784041] usb usb2: Manufacturer: Linux 3.8.0-22-generic ehci_hcd [ 0.784043] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.784115] hub 2-0:1.0: USB hub found [ 0.784119] hub 2-0:1.0: 6 ports detected [ 0.784222] ehci-platform: EHCI generic platform driver [ 0.784229] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.784245] uhci_hcd: USB Universal Host Controller Interface driver [ 0.784261] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.784265] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.784269] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.784303] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.784332] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.784334] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.784336] usb usb3: Product: UHCI Host Controller [ 0.784338] usb usb3: Manufacturer: Linux 3.8.0-22-generic uhci_hcd [ 0.784340] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.784412] hub 3-0:1.0: USB hub found [ 0.784416] hub 3-0:1.0: 2 ports detected [ 0.784488] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.784491] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.784495] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.784528] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.784555] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.784558] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.784560] usb usb4: Product: UHCI Host Controller [ 0.784562] usb usb4: Manufacturer: Linux 3.8.0-22-generic uhci_hcd [ 0.784564] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.784645] hub 4-0:1.0: USB hub found [ 0.784649] hub 4-0:1.0: 2 ports detected [ 0.784725] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.784729] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.784734] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.784757] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 [ 0.784785] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.784787] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.784789] usb usb5: Product: UHCI Host Controller [ 0.784791] usb usb5: Manufacturer: Linux 3.8.0-22-generic uhci_hcd [ 0.784793] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.784865] hub 5-0:1.0: USB hub found [ 0.784869] hub 5-0:1.0: 2 ports detected [ 0.784945] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.784949] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.784953] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.784977] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001860 [ 0.785003] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.785006] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.785008] usb usb6: Product: UHCI Host Controller [ 0.785010] usb usb6: Manufacturer: Linux 3.8.0-22-generic uhci_hcd [ 0.785012] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.785083] hub 6-0:1.0: USB hub found [ 0.785087] hub 6-0:1.0: 2 ports detected [ 0.785154] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.785158] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.785162] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.785187] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 0.785214] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.785216] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.785218] usb usb7: Product: UHCI Host Controller [ 0.785220] usb usb7: Manufacturer: Linux 3.8.0-22-generic uhci_hcd [ 0.785222] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.785291] hub 7-0:1.0: USB hub found [ 0.785295] hub 7-0:1.0: 2 ports detected [ 0.785364] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.785367] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.785371] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.785405] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 0.785437] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.785439] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.785441] usb usb8: Product: UHCI Host Controller [ 0.785443] usb usb8: Manufacturer: Linux 3.8.0-22-generic uhci_hcd [ 0.785445] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.785515] hub 8-0:1.0: USB hub found [ 0.785518] hub 8-0:1.0: 2 ports detected [ 0.785641] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.793125] i8042: Detected active multiplexing controller, rev 1.1 [ 0.795815] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.795820] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.795841] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.795859] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.795879] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.795959] mousedev: PS/2 mouse device common for all mice [ 0.796090] rtc_cmos 00:05: RTC can wake from S4 [ 0.796206] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.796234] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.796318] device-mapper: uevent: version 1.0.3 [ 0.796370] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 0.796385] EISA: Probing bus 0 at eisa.0 [ 0.796387] EISA: Cannot allocate resource for mainboard [ 0.796388] Cannot allocate resource for EISA slot 1 [ 0.796390] Cannot allocate resource for EISA slot 2 [ 0.796391] Cannot allocate resource for EISA slot 3 [ 0.796393] Cannot allocate resource for EISA slot 4 [ 0.796394] Cannot allocate resource for EISA slot 5 [ 0.796396] Cannot allocate resource for EISA slot 6 [ 0.796397] Cannot allocate resource for EISA slot 7 [ 0.796398] Cannot allocate resource for EISA slot 8 [ 0.796400] EISA: Detected 0 cards. [ 0.796407] cpufreq-nforce2: No nForce2 chipset. [ 0.796445] cpuidle: using governor ladder [ 0.796493] cpuidle: using governor menu [ 0.796496] ledtrig-cpu: registered to indicate activity on CPUs [ 0.796498] EFI Variables Facility v0.08 2004-May-17 [ 0.796626] ashmem: initialized [ 0.796735] TCP: cubic registered [ 0.796833] NET: Registered protocol family 10 [ 0.797015] NET: Registered protocol family 17 [ 0.797025] Key type dns_resolver registered [ 0.797180] Using IPI No-Shortcut mode [ 0.797240] Loading module verification certificates [ 0.800918] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: a21e02114ace4dbf30586700f21b7fa973405f24' [ 0.800929] registered taskstats version 1 [ 0.803190] Key type trusted registered [ 0.803685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.805200] Key type encrypted registered [ 0.807468] rtc_cmos 00:05: setting system clock to 2013-06-01 02:49:16 UTC (1370054956) [ 0.968069] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.968071] EDD information not available. [ 1.104390] isapnp: No Plug & Play device found [ 1.104508] Freeing unused kernel memory: 788k freed [ 1.104754] Write protecting the kernel text: 6252k [ 1.104819] Write protecting the kernel read-only data: 2436k [ 1.104820] NX-protecting the kernel data: 3988k [ 1.116033] udevd[97]: starting version 175 [ 1.164567] pps_core: LinuxPPS API ver. 1 registered [ 1.164570] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.170059] Disabling lock debugging due to kernel taint [ 1.170611] ahci 0000:00:1f.2: version 3.0 [ 1.170678] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 1.170771] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.170775] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs [ 1.170780] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.184475] scsi0 : ahci [ 1.186369] scsi1 : ahci [ 1.188023] scsi2 : ahci [ 1.190359] scsi3 : ahci [ 1.191738] PTP clock support registered [ 1.196655] scsi4 : ahci [ 1.201073] tg3.c:v3.128 (December 03, 2012) [ 1.201237] scsi5 : ahci [ 1.201288] ata1: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 44 [ 1.201294] ata2: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304180 irq 44 [ 1.201296] ata3: DUMMY [ 1.201298] ata4: DUMMY [ 1.201301] ata5: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304300 irq 44 [ 1.201304] ata6: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304380 irq 44 [ 1.249282] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:24:e8:82:a6:53 [ 1.249287] tg3 0000:02:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.249290] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.249292] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.344056] usb 1-6: new high-speed USB device number 3 using ehci-pci [ 1.520058] ata5: SATA link down (SStatus 0 SControl 300) [ 1.520103] ata6: SATA link down (SStatus 0 SControl 300) [ 1.580620] usb 1-6: New USB device found, idVendor=0c45, idProduct=6408 [ 1.580625] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.580628] usb 1-6: Product: Laptop_Integrated_Webcam_2M [ 1.580632] usb 1-6: Manufacturer: M092S-P00-9720-SC036 [ 1.692059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.692088] usb 2-2: new high-speed USB device number 2 using ehci-pci [ 1.692090] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.694225] ata1.00: ATA-8: WDC WD5000BEVT-75ZAT0, 01.01A01, max UDMA/133 [ 1.694229] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.696132] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GA11N, A102, max UDMA/133 [ 1.697472] ata1.00: configured for UDMA/133 [ 1.697616] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-7 01.0 PQ: 0 ANSI: 5 [ 1.697763] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.697790] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.697820] sd 0:0:0:0: [sda] Write Protect is off [ 1.697823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.697848] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.700999] ata2.00: configured for UDMA/133 [ 1.705476] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GA11N A102 PQ: 0 ANSI: 5 [ 1.710443] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 1.710447] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.710545] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.710608] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.744382] sda: sda1 sda3 sda4 < sda5 sda6 > [ 1.744875] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.824697] usb 2-2: New USB device found, idVendor=1a40, idProduct=0101 [ 1.824702] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.824706] usb 2-2: Product: USB 2.0 Hub [ 1.824967] hub 2-2:1.0: USB hub found [ 1.825060] hub 2-2:1.0: 4 ports detected [ 2.064053] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 2.203944] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.203947] EXT4-fs (sda1): write access will be enabled during recovery [ 2.238586] usb 4-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 2.238591] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.238595] usb 4-1: Product: BCM2046B1 [ 2.238598] usb 4-1: Manufacturer: Broadcom [ 2.241606] hub 4-1:1.0: USB hub found [ 2.243587] hub 4-1:1.0: 3 ports detected [ 2.448194] usb 2-2.1: new high-speed USB device number 3 using ehci-pci [ 2.556948] usb 2-2.1: New USB device found, idVendor=0cf3, idProduct=7015 [ 2.556953] usb 2-2.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 2.556956] usb 2-2.1: Product: UB95 [ 2.556960] usb 2-2.1: Manufacturer: ATHEROS [ 2.556963] usb 2-2.1: SerialNumber: 12345 [ 2.629586] usb 4-1.1: new full-speed USB device number 3 using uhci_hcd [ 2.750589] usb 4-1.1: New USB device found, idVendor=413c, idProduct=8161 [ 2.750594] usb 4-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.769651] usbcore: registered new interface driver usbhid [ 2.769654] usbhid: USB HID core driver [ 2.775604] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input4 [ 2.775686] hid-generic 0003:413C:8161.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.1-1.1/input0 [ 2.825576] usb 4-1.2: new full-speed USB device number 4 using uhci_hcd [ 2.949571] usb 4-1.2: New USB device found, idVendor=413c, idProduct=8162 [ 2.949574] usb 4-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.956311] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.2/4-1.2:1.0/input/input5 [ 2.956399] hid-generic 0003:413C:8162.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.1-1.2/input0 [ 4.855801] EXT4-fs (sda1): orphan cleanup on readonly fs [ 4.855809] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8126488 [ 4.855874] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8126487 [ 4.855888] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8126486 [ 4.855901] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8126485 [ 4.855914] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8126484 [ 4.855927] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8126483 [ 4.855964] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8126482 [ 4.855976] EXT4-fs (sda1): 7 orphan inodes deleted [ 4.855977] EXT4-fs (sda1): recovery complete [ 4.936381] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 13.797944] Adding 4156412k swap on /dev/sda5. Priority:-1 extents:1 across:4156412k [ 13.975290] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.058851] udevd[379]: starting version 175 [ 14.294779] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 14.296067] type=1400 audit(1370054969.984:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=584 comm="apparmor_parser" [ 14.296085] type=1400 audit(1370054969.984:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=586 comm="apparmor_parser" [ 14.296490] type=1400 audit(1370054969.984:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=586 comm="apparmor_parser" [ 14.296713] type=1400 audit(1370054969.984:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=586 comm="apparmor_parser" [ 14.301562] type=1400 audit(1370054969.988:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=584 comm="apparmor_parser" [ 14.301789] type=1400 audit(1370054969.988:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=584 comm="apparmor_parser" [ 14.338910] lp: driver loaded but no devices found [ 14.379496] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251) [ 14.379503] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.379507] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 14.379510] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.379512] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 14.379515] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.379517] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 14.382138] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 14.388381] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 14.420030] [drm] Initialized drm 1.1.0 20060810 [ 14.529395] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 14.544589] cfg80211: Calling CRDA to update world regulatory domain [ 14.551370] Linux video capture interface: v2.00 [ 14.580532] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 14.580536] Copyright(c) 2003-2012 Intel Corporation [ 14.580681] iwlwifi 0000:06:00.0: irq 46 for MSI/MSI-X [ 14.581354] hda_codec: ALC665: SKU not ready 0x598301f0 [ 14.585573] wmi: Mapper loaded [ 14.592993] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 14.599103] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 14.599231] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.608461] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 14.608524] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X [ 14.695951] iwlwifi 0000:06:00.0: loaded firmware version 8.83.5.1 build 33692 [ 14.713497] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6408) [ 14.718981] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 14.718985] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 14.718987] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 14.718989] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 14.718991] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_P2P disabled [ 14.718994] iwlwifi 0000:06:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 14.719051] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.722068] iwlwifi 0000:06:00.0: RF_KILL bit toggled to enable radio. [ 14.753624] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9 [ 14.754355] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 14.754419] usbcore: registered new interface driver uvcvideo [ 14.754421] USB Video Class driver (1.1.1) [ 14.755968] [drm] radeon defaulting to kernel modesetting. [ 14.755971] [drm] radeon kernel modesetting enabled. [ 14.764376] [drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x1028:0x02E8). [ 14.764404] [drm] register mmio base: 0xFC000000 [ 14.764405] [drm] register mmio size: 65536 [ 14.764519] ATOM BIOS: BR34026 [ 14.764543] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 14.764546] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [ 14.767006] [drm] Detected VRAM RAM=512M, BAR=256M [ 14.767009] [drm] RAM width 64bits DDR [ 14.768131] [TTM] Zone kernel: Available graphics memory: 425286 kiB [ 14.768133] [TTM] Zone highmem: Available graphics memory: 2047988 kiB [ 14.768135] [TTM] Initializing pool allocator [ 14.768140] [TTM] Initializing DMA pool allocator [ 14.768159] [drm] radeon: 512M of VRAM memory ready [ 14.768161] [drm] radeon: 512M of GTT memory ready. [ 14.768174] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 14.768176] [drm] Driver supports precise vblank timestamp query. [ 14.768218] radeon 0000:01:00.0: irq 48 for MSI/MSI-X [ 14.768227] radeon 0000:01:00.0: radeon: using MSI. [ 14.768286] [drm] radeon: irq initialized. [ 14.768291] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 14.776836] ACPI Warning: _BQC returned an invalid level (20121018/video-494) [ 14.779588] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 14.780067] [drm] probing gen 2 caps for device 8086:2a41 = 1/0 [ 14.781686] [drm] Loading RV710 Microcode [ 14.788915] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 14.797176] acpi device:01: registered as cooling_device4 [ 14.797201] ACPI: Video Device [ATID] (multi-head: yes rom: no post: no) [ 14.797274] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input11 [ 14.848418] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 14.948678] input: Dell WMI hotkeys as /devices/virtual/input/input12 [ 15.074907] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 15.074967] radeon 0000:01:00.0: WB enabled [ 15.074971] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc6fc00 [ 15.074973] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffc6fc0c [ 15.121200] [drm] ring test on 0 succeeded in 1 usecs [ 15.121259] [drm] ring test on 3 succeeded in 1 usecs [ 15.121417] [drm] ib test on ring 0 succeeded in 0 usecs [ 15.121434] [drm] ib test on ring 3 succeeded in 0 usecs [ 15.122125] [drm] radeon atom DIG backlight initialized [ 15.122128] [drm] Radeon Display Connectors [ 15.122129] [drm] Connector 0: [ 15.122131] [drm] VGA-1 [ 15.122133] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 15.122134] [drm] Encoders: [ 15.122136] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 15.122137] [drm] Connector 1: [ 15.122139] [drm] LVDS-1 [ 15.122141] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74 [ 15.122142] [drm] Encoders: [ 15.122143] [drm] LCD1: INTERNAL_UNIPHY2 [ 15.122144] [drm] Connector 2: [ 15.122146] [drm] HDMI-A-1 [ 15.122147] [drm] HPD1 [ 15.122149] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [ 15.122150] [drm] Encoders: [ 15.122152] [drm] DFP1: INTERNAL_UNIPHY [ 15.122165] [drm] Internal thermal controller without fan control [ 15.122218] [drm] radeon: power management initialized [ 15.219937] usb 2-2.1: ath9k_htc: Firmware htc_7010.fw requested [ 15.220281] usbcore: registered new interface driver ath9k_htc [ 15.333834] cfg80211: World regulatory domain updated: [ 15.333838] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.333840] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.333842] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.333844] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.333846] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.333848] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.605686] usb 2-2.1: ath9k_htc: Transferred FW: htc_7010.fw, size: 72992 [ 15.696570] usb 4-1.3: new full-speed USB device number 5 using uhci_hcd [ 15.698679] ath9k_htc 2-2.1:1.0: ath9k_htc: HTC initialized with 45 credits [ 15.959580] usb 4-1.3: New USB device found, idVendor=413c, idProduct=8160 [ 15.959586] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 15.959590] usb 4-1.3: Product: Dell Wireless 365 Bluetooth Module [ 15.959593] usb 4-1.3: Manufacturer: Dell Computer Corp [ 15.988028] Bluetooth: Core ver 2.16 [ 15.988083] NET: Registered protocol family 31 [ 15.988085] Bluetooth: HCI device and connection manager initialized [ 15.989443] Bluetooth: HCI socket layer initialized [ 15.989448] Bluetooth: L2CAP socket layer initialized [ 15.989456] Bluetooth: SCO socket layer initialized [ 16.015271] usbcore: registered new interface driver btusb [ 16.017740] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 583640 [ 16.022808] ath9k_htc 2-2.1:1.0: ath9k_htc: FW Version: 1.3 [ 16.022812] ath: EEPROM regdomain: 0x809c [ 16.022814] ath: EEPROM indicates we should expect a country code [ 16.022816] ath: doing EEPROM country->regdmn map search [ 16.022819] ath: country maps to regdmn code: 0x52 [ 16.022821] ath: Country alpha2 being used: CN [ 16.022823] ath: Regpair used: 0x52 [ 16.023234] ieee80211 phy1: Atheros AR9287 Rev:2 [ 16.023244] cfg80211: Calling CRDA for country: CN [ 16.029253] cfg80211: Regulatory domain changed to country: CN [ 16.029256] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 16.029258] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 16.029260] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 16.067058] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input13 [ 16.111655] [drm] fb mappable at 0xD0142000 [ 16.111659] [drm] vram apper at 0xD0000000 [ 16.111660] [drm] size 4325376 [ 16.111662] [drm] fb depth is 24 [ 16.111663] [drm] pitch is 5632 [ 16.111779] fbcon: radeondrmfb (fb0) is primary device [ 16.764318] Console: switching to colour frame buffer device 170x48 [ 16.767960] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 16.767962] radeon 0000:01:00.0: registered panic notifier [ 16.768221] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0 [ 20.845835] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 21.522024] init: failsafe main process (965) killed by TERM signal [ 22.054411] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.054415] Bluetooth: BNEP filters: protocol multicast [ 22.054424] Bluetooth: BNEP socket layer initialized [ 22.062514] Bluetooth: RFCOMM TTY layer initialized [ 22.062527] Bluetooth: RFCOMM socket layer initialized [ 22.062529] Bluetooth: RFCOMM ver 1.11 [ 22.399085] type=1400 audit(1370054978.084:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1095 comm="apparmor_parser" [ 22.399405] type=1400 audit(1370054978.084:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1095 comm="apparmor_parser" [ 22.402266] type=1400 audit(1370054978.088:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1096 comm="apparmor_parser" [ 22.402585] type=1400 audit(1370054978.088:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1096 comm="apparmor_parser" [ 22.406388] type=1400 audit(1370054978.092:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1102 comm="apparmor_parser" [ 22.406714] type=1400 audit(1370054978.092:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1102 comm="apparmor_parser" [ 22.416430] type=1400 audit(1370054978.104:14): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1103 comm="apparmor_parser" [ 22.416806] type=1400 audit(1370054978.104:15): apparmor="STATUS" operation="profile_load" name="system_tor" pid=1104 comm="apparmor_parser" [ 22.417660] type=1400 audit(1370054978.104:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1103 comm="apparmor_parser" [ 22.417885] type=1400 audit(1370054978.104:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1103 comm="apparmor_parser" [ 22.440542] ppdev: user-space parallel port driver [ 22.686579] init: avahi-cups-reload main process (1099) terminated with status 1 [ 25.362901] tg3 0000:02:00.0: irq 49 for MSI/MSI-X [ 25.475694] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.476279] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.478825] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 25.481918] iwlwifi 0000:06:00.0: Radio type=0x1-0x2-0x0 [ 25.680901] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 25.683924] iwlwifi 0000:06:00.0: Radio type=0x1-0x2-0x0 [ 25.819352] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.819672] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.931968] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 25.932326] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 27.924593] wlan1: authenticate with b0:48:7a:b5:53:9a [ 28.025596] wlan1: send auth to b0:48:7a:b5:53:9a (try 1/3) [ 28.027323] wlan1: authenticated [ 28.027452] ath9k_htc 2-2.1:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP [ 28.027455] ath9k_htc 2-2.1:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP [ 28.028048] wlan1: associate with b0:48:7a:b5:53:9a (try 1/3) [ 28.031572] wlan1: RX AssocResp from b0:48:7a:b5:53:9a (capab=0x431 status=0 aid=1) [ 28.034817] wlan1: associated [ 28.034845] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 975.100678] usb 2-2: USB disconnect, device number 2 [ 975.100683] usb 2-2.1: USB disconnect, device number 3 [ 975.100823] wlan1: deauthenticating from b0:48:7a:b5:53:9a by local choice (reason=3) [ 975.212377] ath: phy1: Chip reset failed [ 975.212383] ath: phy1: Unable to reset channel (2462 Mhz) reset status -22 [ 975.213485] ath: phy1: Unable to set channel [ 975.313982] ath: phy1: RX failed to go idle in 10 ms RXSM=0x9c784df3 [ 975.324181] ath: phy1: Failed to wakeup in 500us [ 975.324335] cfg80211: Calling CRDA to update world regulatory domain [ 975.548054] ath: phy1: RX failed to go idle in 10 ms RXSM=0x9c784df3 [ 975.566054] ath: phy1: Failed to wakeup in 500us [ 975.666057] ath: phy1: RX failed to go idle in 10 ms RXSM=0x9c784df3 [ 976.001281] cfg80211: World regulatory domain updated: [ 976.001285] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 976.001287] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 976.001289] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 976.001291] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 976.001293] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 976.001295] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 976.040126] usb 2-2.1: ath9k_htc: USB layer deinitialized [ 976.992067] usb 2-2: new high-speed USB device number 4 using ehci-pci [ 977.124619] usb 2-2: New USB device found, idVendor=1a40, idProduct=0101 [ 977.124624] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 977.124627] usb 2-2: Product: USB 2.0 Hub [ 977.125116] hub 2-2:1.0: USB hub found [ 977.125241] hub 2-2:1.0: 4 ports detected [ 977.396123] usb 2-2.1: new high-speed USB device number 5 using ehci-pci [ 977.504993] usb 2-2.1: New USB device found, idVendor=0cf3, idProduct=7015 [ 977.504997] usb 2-2.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 977.505000] usb 2-2.1: Product: UB95 [ 977.505002] usb 2-2.1: Manufacturer: ATHEROS [ 977.505004] usb 2-2.1: SerialNumber: 12345 [ 977.505529] usb 2-2.1: ath9k_htc: Firmware htc_7010.fw requested [ 977.612105] usb 2-2.1: ath9k_htc: Transferred FW: htc_7010.fw, size: 72992 [ 977.673357] ath9k_htc 2-2.1:1.0: ath9k_htc: HTC initialized with 45 credits [ 977.798357] ath9k_htc 2-2.1:1.0: ath9k_htc: FW Version: 1.3 [ 977.798362] ath: EEPROM regdomain: 0x809c [ 977.798363] ath: EEPROM indicates we should expect a country code [ 977.798365] ath: doing EEPROM country->regdmn map search [ 977.798366] ath: country maps to regdmn code: 0x52 [ 977.798368] ath: Country alpha2 being used: CN [ 977.798369] ath: Regpair used: 0x52 [ 977.800016] ieee80211 phy2: Atheros AR9287 Rev:2 [ 977.801323] cfg80211: Calling CRDA for country: CN [ 977.804714] cfg80211: Regulatory domain changed to country: CN [ 977.804717] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 977.804719] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 977.804721] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 977.920214] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 977.920800] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 980.004560] wlan1: authenticate with b0:48:7a:b5:53:9a [ 980.065784] wlan1: send auth to b0:48:7a:b5:53:9a (try 1/3) [ 980.068113] wlan1: authenticated [ 980.068241] ath9k_htc 2-2.1:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP [ 980.068244] ath9k_htc 2-2.1:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP [ 980.072054] wlan1: associate with b0:48:7a:b5:53:9a (try 1/3) [ 980.074628] wlan1: RX AssocResp from b0:48:7a:b5:53:9a (capab=0x431 status=0 aid=3) [ 980.078361] wlan1: associated [ 980.078393] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready