[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-18-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu4) ) #27-Ubuntu SMP Fri Mar 26 21:13:44 UTC 2010 (Ubuntu 2.6.32-18.27-generic 2.6.32.10+drm33.1) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-18-generic root=UUID=b4e12f82-c568-47ec-af5c-a8a236b46102 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000200000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x200000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000200000000 aka 8192M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcffb0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] modified: 00000000cffb0000 - 00000000cffbe000 (ACPI data) [ 0.000000] modified: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000200000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cffb0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cffb0000 page 4k [ 0.000000] kernel direct mapping tables up to cffb0000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000200000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] kernel direct mapping tables up to 200000000 @ 12000-13000 [ 0.000000] RAMDISK: 377e0000 - 37feff3b [ 0.000000] ACPI: RSDP 00000000000fa080 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cffb0000 00038 (v01 120809 OEMRSDT 20091208 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cffb0200 00084 (v02 120809 OEMFACP 20091208 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cffb0440 09541 (v01 P0001 P0001000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cffbe000 00040 [ 0.000000] ACPI: APIC 00000000cffb0390 0006C (v01 120809 OEMAPIC 20091208 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cffb0400 0003C (v01 120809 OEMMCFG 20091208 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffbe040 00071 (v01 120809 AMI_OEM 20091208 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cffb9990 00038 (v01 120809 OEMHPET 20091208 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000200000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000200000000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000056fff] pages 40 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0200000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a27e64] TEXT DATA BSS ==> [0001000000 - 0001a27e64] [ 0.000000] #3 [00377e0000 - 0037feff3b] RAMDISK ==> [00377e0000 - 0037feff3b] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a28000 - 0001a2819d] BRK ==> [0001a28000 - 0001a2819d] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff880028600000-ffff88002ebfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00200000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cffb0 [ 0.000000] 0: 0x00100000 -> 0x00200000 [ 0.000000] On node 0 totalpages: 1900351 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 101 pages reserved [ 0.000000] DMA zone: 3826 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000 [ 0.000000] PM: Registered nosave memory: 00000000cffbe000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ff00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91480 r8192 d23208 u524288 [ 0.000000] pcpu-alloc: s91480 r8192 d23208 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1871578 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-18-generic root=UUID=b4e12f82-c568-47ec-af5c-a8a236b46102 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 7411968k/8388608k available (5407k kernel code, 787204k absent, 189436k reserved, 2969k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 76021760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2507.697 MHz processor. [ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5015.38 BogoMIPS (lpj=25076940) [ 0.020026] Security Framework initialized [ 0.020041] AppArmor: AppArmor initialized [ 0.020751] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.023404] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024594] Mount-cache hash table entries: 256 [ 0.024705] Initializing cgroup subsys ns [ 0.024709] Initializing cgroup subsys cpuacct [ 0.024712] Initializing cgroup subsys memory [ 0.024718] Initializing cgroup subsys devices [ 0.024720] Initializing cgroup subsys freezer [ 0.024722] Initializing cgroup subsys net_cls [ 0.024738] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.024740] CPU: L2 Cache: 512K (64 bytes/line) [ 0.024742] CPU 0/0x0 -> Node 0 [ 0.024745] tseg: 0000000000 [ 0.024757] CPU: Physical Processor ID: 0 [ 0.024758] CPU: Processor Core ID: 0 [ 0.024761] mce: CPU supports 6 MCE banks [ 0.024769] using C1E aware idle routine [ 0.024771] Performance Events: AMD PMU driver. [ 0.024775] ... version: 0 [ 0.024776] ... bit width: 48 [ 0.024778] ... generic registers: 4 [ 0.024779] ... value mask: 0000ffffffffffff [ 0.024781] ... max period: 00007fffffffffff [ 0.024782] ... fixed-purpose events: 0 [ 0.024784] ... event mask: 000000000000000f [ 0.026258] ACPI: Core revision 20090903 [ 0.037301] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.037310] ftrace: allocating 22512 entries in 89 pages [ 0.040058] Setting APIC routing to flat [ 0.040361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.143315] CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.300089] CPU1: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 [ 0.300096] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.310054] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.030000] Initializing CPU#2 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 2/0x2 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 2 [ 0.470115] CPU2: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 [ 0.470121] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.480051] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.030000] Initializing CPU#3 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 3/0x3 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 3 [ 0.640032] CPU3: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 [ 0.640037] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.650009] Brought up 4 CPUs [ 0.650011] Total of 4 processors activated (20061.21 BogoMIPS). [ 0.650854] CPU0 attaching sched-domain: [ 0.650857] domain 0: span 0-3 level MC [ 0.650859] groups: 0 1 2 3 [ 0.650864] CPU1 attaching sched-domain: [ 0.650865] domain 0: span 0-3 level MC [ 0.650867] groups: 1 2 3 0 [ 0.650871] CPU2 attaching sched-domain: [ 0.650872] domain 0: span 0-3 level MC [ 0.650874] groups: 2 3 0 1 [ 0.650879] CPU3 attaching sched-domain: [ 0.650880] domain 0: span 0-3 level MC [ 0.650882] groups: 3 0 1 2 [ 0.651047] devtmpfs: initialized [ 0.651317] regulator: core version 0.5 [ 0.651341] Time: 0:07:45 Date: 03/31/10 [ 0.651381] NET: Registered protocol family 16 [ 0.651468] node 0 link 0: io port [1000, ffffff] [ 0.651471] TOM: 00000000d0000000 aka 3328M [ 0.651473] Fam 10h mmconf [e0000000, efffffff] [ 0.651476] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.651479] node 0 link 0: mmio [f0000000, ffffffff] [ 0.651481] node 0 link 0: mmio [a0000, bffff] [ 0.651484] node 0 link 0: mmio [d0000000, dfffffff] [ 0.651486] TOM2: 0000000200000000 aka 8192M [ 0.651487] bus: [00,07] on node 0 link 0 [ 0.651489] bus: 00 index 0 io port: [0, ffff] [ 0.651491] bus: 00 index 1 mmio: [f0000000, ffffffff] [ 0.651492] bus: 00 index 2 mmio: [a0000, bffff] [ 0.651494] bus: 00 index 3 mmio: [d0000000, dfffffff] [ 0.651496] bus: 00 index 4 mmio: [200000000, fcffffffff] [ 0.651505] ACPI: bus type pci registered [ 0.651559] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.651562] PCI: Not using MMCONFIG. [ 0.651563] PCI: Using configuration type 1 for base access [ 0.651565] PCI: Using configuration type 1 for extended access [ 0.652113] Trying to unpack rootfs image as initramfs... [ 0.680242] bio: create slab at 0 [ 0.680859] ACPI: EC: Look up EC in DSDT [ 0.682758] ACPI: Executed 3 blocks of module-level executable AML code [ 0.689779] ACPI: Interpreter enabled [ 0.689784] ACPI: (supports S0 S1 S3 S4 S5) [ 0.689806] ACPI: Using IOAPIC for interrupt routing [ 0.689921] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.692727] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.699381] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.705597] ACPI Warning: Incorrect checksum in table [OEMB] - A8, should be A7 (20090903/tbutils-314) [ 0.705690] ACPI: No dock devices found. [ 0.705835] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.705882] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.705953] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.705956] pci 0000:00:0b.0: PME# disabled [ 0.706001] pci 0000:00:12.0: reg 10 io port: [0xd000-0xd007] [ 0.706008] pci 0000:00:12.0: reg 14 io port: [0xc000-0xc003] [ 0.706014] pci 0000:00:12.0: reg 18 io port: [0xb000-0xb007] [ 0.706021] pci 0000:00:12.0: reg 1c io port: [0xa000-0xa003] [ 0.706028] pci 0000:00:12.0: reg 20 io port: [0x9000-0x900f] [ 0.706035] pci 0000:00:12.0: reg 24 32bit mmio: [0xfeaff800-0xfeaffbff] [ 0.706084] pci 0000:00:13.0: reg 10 32bit mmio: [0xfeafe000-0xfeafefff] [ 0.706140] pci 0000:00:13.1: reg 10 32bit mmio: [0xfeafd000-0xfeafdfff] [ 0.706197] pci 0000:00:13.2: reg 10 32bit mmio: [0xfeafc000-0xfeafcfff] [ 0.706253] pci 0000:00:13.3: reg 10 32bit mmio: [0xfeafb000-0xfeafbfff] [ 0.706310] pci 0000:00:13.4: reg 10 32bit mmio: [0xfeafa000-0xfeafafff] [ 0.706394] pci 0000:00:13.5: reg 10 32bit mmio: [0xfeaff000-0xfeaff0ff] [ 0.706453] pci 0000:00:13.5: supports D1 D2 [ 0.706455] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.706459] pci 0000:00:13.5: PME# disabled [ 0.706506] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f] [ 0.706576] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.706582] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.706589] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.706595] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.706602] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.706656] pci 0000:00:14.2: reg 10 64bit mmio: [0xfeaf4000-0xfeaf7fff] [ 0.706701] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.706705] pci 0000:00:14.2: PME# disabled [ 0.706924] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.706932] pci 0000:01:00.0: reg 18 64bit mmio: [0xfebf0000-0xfebfffff] [ 0.706937] pci 0000:01:00.0: reg 20 io port: [0xe000-0xe0ff] [ 0.706946] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebdffff] [ 0.706965] pci 0000:01:00.0: supports D1 D2 [ 0.706997] pci 0000:01:00.1: reg 10 64bit mmio: [0xfebec000-0xfebeffff] [ 0.707031] pci 0000:01:00.1: supports D1 D2 [ 0.707088] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff] [ 0.707090] pci 0000:00:0b.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.707094] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.707154] pci 0000:00:14.4: transparent bridge [ 0.707174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.707372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT] [ 0.707436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.711135] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.711232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.711327] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.711420] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.711514] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.711607] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. [ 0.711701] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.711795] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.711890] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.711893] vgaarb: loaded [ 0.711976] SCSI subsystem initialized [ 0.712066] libata version 3.00 loaded. [ 0.712115] usbcore: registered new interface driver usbfs [ 0.712124] usbcore: registered new interface driver hub [ 0.712145] usbcore: registered new device driver usb [ 0.712238] ACPI: WMI: Mapper loaded [ 0.712239] PCI: Using ACPI for IRQ routing [ 0.712246] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.712248] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.712368] NetLabel: Initializing [ 0.712370] NetLabel: domain hash size = 128 [ 0.712371] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.712383] NetLabel: unlabeled traffic allowed by default [ 0.712414] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.712418] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.714429] Switching to clocksource tsc [ 0.714714] AppArmor: AppArmor Filesystem Enabled [ 0.714714] pnp: PnP ACPI init [ 0.714714] ACPI: bus type pnp registered [ 0.714714] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.714714] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.714714] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.714714] pnp 00:0b: mem resource (0x100000-0xcfffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.714714] pnp: PnP ACPI: found 12 devices [ 0.714714] ACPI: ACPI bus type pnp unregistered [ 0.714714] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.714714] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.714714] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.714714] system 00:07: ioport range 0x40b-0x40b has been reserved [ 0.714714] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 0.714714] system 00:07: ioport range 0xc00-0xc01 has been reserved [ 0.714714] system 00:07: ioport range 0xc14-0xc14 has been reserved [ 0.714714] system 00:07: ioport range 0xc50-0xc51 has been reserved [ 0.714714] system 00:07: ioport range 0xc52-0xc52 has been reserved [ 0.714714] system 00:07: ioport range 0xc6c-0xc6c has been reserved [ 0.714714] system 00:07: ioport range 0xc6f-0xc6f has been reserved [ 0.714714] system 00:07: ioport range 0xcd0-0xcd1 has been reserved [ 0.714714] system 00:07: ioport range 0xcd2-0xcd3 has been reserved [ 0.714714] system 00:07: ioport range 0xcd4-0xcd5 has been reserved [ 0.714714] system 00:07: ioport range 0xcd6-0xcd7 has been reserved [ 0.714714] system 00:07: ioport range 0xcd8-0xcdf has been reserved [ 0.714714] system 00:07: ioport range 0x800-0x89f has been reserved [ 0.714714] system 00:07: ioport range 0xb10-0xb1f has been reserved [ 0.714714] system 00:07: ioport range 0x900-0x90f has been reserved [ 0.714714] system 00:07: ioport range 0x910-0x91f has been reserved [ 0.714714] system 00:07: ioport range 0xfe00-0xfefe has been reserved [ 0.714714] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.714714] system 00:07: iomem range 0xfff00000-0xffffffff has been reserved [ 0.714714] system 00:09: ioport range 0xe00-0xe0f has been reserved [ 0.714714] system 00:09: ioport range 0xe80-0xe8f has been reserved [ 0.714714] system 00:09: ioport range 0xf40-0xf4f has been reserved [ 0.714714] system 00:09: ioport range 0xa30-0xa3f has been reserved [ 0.714714] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.714714] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.718987] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 [ 0.718990] pci 0000:00:0b.0: IO window: 0xe000-0xefff [ 0.718993] pci 0000:00:0b.0: MEM window: 0xfeb00000-0xfebfffff [ 0.718997] pci 0000:00:0b.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.719001] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02 [ 0.719003] pci 0000:00:14.4: IO window: disabled [ 0.719008] pci 0000:00:14.4: MEM window: disabled [ 0.719012] pci 0000:00:14.4: PREFETCH window: disabled [ 0.719024] alloc irq_desc for 19 on node 0 [ 0.719026] alloc kstat_irqs on node 0 [ 0.719030] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.719034] pci 0000:00:0b.0: setting latency timer to 64 [ 0.719042] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.719044] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.719046] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.719048] pci_bus 0000:01: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.719050] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.719052] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.719054] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.719084] NET: Registered protocol family 2 [ 0.719279] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.720506] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.723019] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.723333] TCP: Hash tables configured (established 524288 bind 65536) [ 0.723335] TCP reno registered [ 0.723416] NET: Registered protocol family 1 [ 0.927393] Freeing initrd memory: 8255k freed [ 0.945472] pci 0000:01:00.0: Boot video device [ 0.945590] PCI-DMA: Disabling AGP. [ 0.945671] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.945672] PCI-DMA: using GART IOMMU. [ 0.945675] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.947219] Scanning for low memory corruption every 60 seconds [ 0.947326] audit: initializing netlink socket (disabled) [ 0.947335] type=2000 audit(1269994064.945:1): initialized [ 0.954616] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.955838] VFS: Disk quotas dquot_6.5.2 [ 0.955881] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.956401] fuse init (API version 7.13) [ 0.956468] msgmni has been set to 14492 [ 0.956647] alg: No test for stdrng (krng) [ 0.956689] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.956691] io scheduler noop registered [ 0.956693] io scheduler anticipatory registered [ 0.956694] io scheduler deadline registered [ 0.956726] io scheduler cfq registered (default) [ 0.956839] alloc irq_desc for 24 on node 0 [ 0.956840] alloc kstat_irqs on node 0 [ 0.956847] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X [ 0.956853] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.956907] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.956924] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.956999] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.957006] ACPI: Power Button [PWRB] [ 0.957038] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.957045] ACPI: Power Button [PWRF] [ 0.957335] ACPI: duty_cycle spans bit 4 [ 0.957355] processor LNXCPU:00: registered as cooling_device0 [ 0.957380] processor LNXCPU:01: registered as cooling_device1 [ 0.957404] processor LNXCPU:02: registered as cooling_device2 [ 0.957428] processor LNXCPU:03: registered as cooling_device3 [ 0.960311] Linux agpgart interface v0.103 [ 0.960336] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.960441] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.960690] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.961428] brd: module loaded [ 0.961786] loop: module loaded [ 0.961851] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.961976] alloc irq_desc for 16 on node 0 [ 0.961978] alloc kstat_irqs on node 0 [ 0.961982] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.962008] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 0.962232] Fixed MDIO Bus: probed [ 0.962254] PPP generic driver version 2.4.2 [ 0.962280] tun: Universal TUN/TAP device driver, 1.6 [ 0.962282] tun: (C) 1999-2004 Max Krasnyansky [ 0.962339] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.962366] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.962383] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 0.962406] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 0.962430] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 0.962445] ehci_hcd 0000:00:13.5: debug port 1 [ 0.962464] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfeaff000 [ 0.975411] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 0.975470] usb usb1: configuration #1 chosen from 1 choice [ 0.975490] hub 1-0:1.0: USB hub found [ 0.975496] hub 1-0:1.0: 10 ports detected [ 0.975562] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.975585] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.975594] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.975614] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.975634] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfeafe000 [ 1.039482] usb usb2: configuration #1 chosen from 1 choice [ 1.039506] hub 2-0:1.0: USB hub found [ 1.039513] hub 2-0:1.0: 2 ports detected [ 1.039563] alloc irq_desc for 17 on node 0 [ 1.039565] alloc kstat_irqs on node 0 [ 1.039568] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.039577] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.039598] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.039615] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfeafd000 [ 1.099469] usb usb3: configuration #1 chosen from 1 choice [ 1.099485] hub 3-0:1.0: USB hub found [ 1.099492] hub 3-0:1.0: 2 ports detected [ 1.099547] alloc irq_desc for 18 on node 0 [ 1.099548] alloc kstat_irqs on node 0 [ 1.099551] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.099560] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 1.099581] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.099600] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfeafc000 [ 1.109507] usb usb4: configuration #1 chosen from 1 choice [ 1.109531] hub 4-0:1.0: USB hub found [ 1.109538] hub 4-0:1.0: 2 ports detected [ 1.109591] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.109599] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.109623] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.109634] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfeafb000 [ 1.164108] usb usb5: configuration #1 chosen from 1 choice [ 1.164127] hub 5-0:1.0: USB hub found [ 1.164134] hub 5-0:1.0: 2 ports detected [ 1.164188] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.164197] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.164223] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.164233] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfeafa000 [ 1.224118] usb usb6: configuration #1 chosen from 1 choice [ 1.224136] hub 6-0:1.0: USB hub found [ 1.224143] hub 6-0:1.0: 2 ports detected [ 1.224182] uhci_hcd: USB Universal Host Controller Interface driver [ 1.224236] PNP: No PS/2 controller found. Probing ports directly. [ 1.224606] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.224610] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.224660] mice: PS/2 mouse device common for all mice [ 1.224728] rtc_cmos 00:02: RTC can wake from S4 [ 1.224754] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.224778] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.224890] device-mapper: uevent: version 1.0.3 [ 1.224974] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.225039] device-mapper: multipath: version 1.1.0 loaded [ 1.225041] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.225208] cpuidle: using governor ladder [ 1.225210] cpuidle: using governor menu [ 1.225535] TCP cubic registered [ 1.225658] NET: Registered protocol family 10 [ 1.226074] lo: Disabled Privacy Extensions [ 1.226340] NET: Registered protocol family 17 [ 1.226366] powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) [ 1.226372] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 1.226374] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 1.226449] PM: Resume from disk failed. [ 1.226458] registered taskstats version 1 [ 1.226683] Magic number: 2:372:103 [ 1.226740] rtc_cmos 00:02: setting system clock to 2010-03-31 00:07:45 UTC (1269994065) [ 1.226742] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.226744] EDD information not available. [ 1.226782] Freeing unused kernel memory: 876k freed [ 1.227007] Write protecting the kernel read-only data: 7676k [ 1.240011] udev: starting version 151 [ 1.243871] md: linear personality registered for level -1 [ 1.268420] md: multipath personality registered for level -4 [ 1.271996] ahci 0000:00:12.0: version 3.0 [ 1.272015] alloc irq_desc for 22 on node 0 [ 1.272017] alloc kstat_irqs on node 0 [ 1.272024] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.272068] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 1.272148] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.272152] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc [ 1.274147] scsi0 : ahci [ 1.274565] scsi1 : ahci [ 1.274642] scsi2 : ahci [ 1.274711] scsi3 : ahci [ 1.274814] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 [ 1.274818] ata2: SATA max UDMA/133 abar m1024@0xfeaff800 port 0xfeaff980 irq 22 [ 1.274821] ata3: SATA max UDMA/133 abar m1024@0xfeaff800 port 0xfeaffa00 irq 22 [ 1.274825] ata4: SATA max UDMA/133 abar m1024@0xfeaff800 port 0xfeaffa80 irq 22 [ 1.279119] scsi4 : pata_atiixp [ 1.279201] scsi5 : pata_atiixp [ 1.280270] md: raid0 personality registered for level 0 [ 1.280283] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.280286] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.341276] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 1.460576] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.05, max UDMA/66 [ 1.490359] usb 1-3: configuration #1 chosen from 1 choice [ 1.490443] hub 1-3:1.0: USB hub found [ 1.490541] hub 1-3:1.0: 2 ports detected [ 1.500508] ata5.00: configured for UDMA/66 [ 1.620023] usb 1-4: new high speed USB device using ehci_hcd and address 5 [ 1.630055] ata4: SATA link down (SStatus 0 SControl 300) [ 1.630082] ata2: SATA link down (SStatus 0 SControl 300) [ 1.771240] usb 1-4: configuration #1 chosen from 1 choice [ 1.776509] Initializing USB Mass Storage driver... [ 1.776604] scsi6 : SCSI emulation for USB Mass Storage devices [ 1.776663] usb-storage: device found at 5 [ 1.776665] usb-storage: waiting for device to settle before scanning [ 1.776673] usbcore: registered new interface driver usb-storage [ 1.776675] USB Mass Storage support registered. [ 1.800011] ata3: softreset failed (device not ready) [ 1.800014] ata3: applying SB600 PMP SRST workaround and retrying [ 1.980027] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.984635] ata3.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 1.984637] ata3.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.984653] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.989653] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.989659] ata3.00: configured for UDMA/133 [ 2.010017] usb 1-8: new high speed USB device using ehci_hcd and address 7 [ 2.162665] usb 1-8: configuration #1 chosen from 1 choice [ 2.163044] scsi7 : SCSI emulation for USB Mass Storage devices [ 2.163128] usb-storage: device found at 7 [ 2.163129] usb-storage: waiting for device to settle before scanning [ 2.220007] ata1: softreset failed (device not ready) [ 2.220010] ata1: applying SB600 PMP SRST workaround and retrying [ 2.410027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.413657] ata1.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 2.413659] ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.413680] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.418408] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.418415] ata1.00: configured for UDMA/133 [ 2.418498] scsi 0:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 2.418631] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.418649] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 2.418756] scsi 2:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 2.418861] sd 2:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 2.418878] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.418894] sd 2:0:0:0: [sdb] Write Protect is off [ 2.418896] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.418913] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.418938] sd 0:0:0:0: [sda] Write Protect is off [ 2.418940] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.418958] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.419048] sda: [ 2.419130] sdb: [ 2.420335] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.05 PQ: 0 ANSI: 5 [ 2.424711] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.424713] Uniform CD-ROM driver Revision: 3.20 [ 2.424782] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.424823] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 2.426325] sda1 sda2 sda3 [ 2.426842] sdb1 sdb2 sdb3 [ 2.434477] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.440425] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.490019] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 2.583135] md: raid1 personality registered for level 1 [ 2.584971] async_tx: api initialized (async) [ 2.585504] xor: automatically using best checksumming function: generic_sse [ 2.631254] generic_sse: 10198.800 MB/sec [ 2.631261] xor: using function: generic_sse (10198.800 MB/sec) [ 2.693453] usb 2-1: configuration #1 chosen from 1 choice [ 2.708934] usbcore: registered new interface driver hiddev [ 2.714651] input: MLK TCM 2.4GHz Wireless 3KEY MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input3 [ 2.714760] generic-usb 0003:04FC:0538.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK TCM 2.4GHz Wireless 3KEY MOUSE] on usb-0000:00:13.0-1/input0 [ 2.714779] usbcore: registered new interface driver usbhid [ 2.714781] usbhid: v2.6:USB HID core driver [ 2.801261] raid6: int64x1 2133 MB/s [ 2.971276] raid6: int64x2 2943 MB/s [ 3.040035] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 3.141261] raid6: int64x4 2186 MB/s [ 3.286412] usb 2-2: configuration #1 chosen from 1 choice [ 3.300529] input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input4 [ 3.300581] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:13.0-2/input0 [ 3.311254] raid6: int64x8 1986 MB/s [ 3.323418] input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.1/input/input5 [ 3.323474] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:13.0-2/input1 [ 3.481245] raid6: sse2x1 3561 MB/s [ 3.651245] raid6: sse2x2 5845 MB/s [ 3.660015] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 3.821252] raid6: sse2x4 6693 MB/s [ 3.821253] raid6: using algorithm sse2x4 (6693 MB/s) [ 3.825499] md: raid6 personality registered for level 6 [ 3.825501] md: raid5 personality registered for level 5 [ 3.825503] md: raid4 personality registered for level 4 [ 3.830765] md: raid10 personality registered for level 10 [ 3.839005] md: bind [ 3.857516] md: bind [ 3.858663] raid0: looking at sdb3 [ 3.858665] raid0: comparing sdb3(556836736) [ 3.858667] with sdb3(556836736) [ 3.858668] raid0: END [ 3.858669] raid0: ==> UNIQUE [ 3.858670] raid0: 1 zones [ 3.858671] raid0: looking at sda3 [ 3.858673] raid0: comparing sda3(556836736) [ 3.858674] with sdb3(556836736) [ 3.858675] raid0: EQUAL [ 3.858676] raid0: FINAL 1 zones [ 3.858679] raid0: done. [ 3.858680] raid0 : md_size is 1113673472 sectors. [ 3.858681] ******* md0 configuration ********* [ 3.858683] zone0=[sda3/sdb3/] [ 3.858686] zone offset=0kb device offset=0kb size=556836736kb [ 3.858687] ********************************** [ 3.858688] [ 3.858694] md0: detected capacity change from 0 to 570200817664 [ 3.859464] md0: unknown partition table [ 3.907926] EXT4-fs (md0): INFO: recovery required on readonly filesystem [ 3.907930] EXT4-fs (md0): write access will be enabled during recovery [ 3.910452] usb 4-1: configuration #1 chosen from 1 choice [ 3.912409] hub 4-1:1.0: USB hub found [ 3.914379] hub 4-1:1.0: 3 ports detected [ 4.010052] usb 1-3.1: new high speed USB device using ehci_hcd and address 8 [ 4.136396] usb 1-3.1: configuration #1 chosen from 1 choice [ 4.220366] usb 4-1.1: new full speed USB device using ohci_hcd and address 3 [ 4.352429] usb 4-1.1: configuration #1 chosen from 1 choice [ 4.440359] usb 4-1.2: new full speed USB device using ohci_hcd and address 4 [ 4.573438] usb 4-1.2: configuration #1 chosen from 1 choice [ 4.583549] input: HID 045e:00bf as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1.2/4-1.2:1.0/input/input6 [ 4.583606] generic-usb 0003:045E:00BF.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 045e:00bf] on usb-0000:00:13.2-1.2/input0 [ 4.661361] usb 4-1.3: new full speed USB device using ohci_hcd and address 5 [ 4.784404] usb 4-1.3: configuration #1 chosen from 1 choice [ 4.794520] input: HID 045e:00be as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1.3/4-1.3:1.0/input/input7 [ 4.794591] generic-usb 0003:045E:00BE.0005: input,hidraw4: USB HID v1.11 Mouse [HID 045e:00be] on usb-0000:00:13.2-1.3/input0 [ 5.427899] EXT4-fs (md0): orphan cleanup on readonly fs [ 5.427907] EXT4-fs (md0): ext4_orphan_cleanup: deleting unreferenced inode 33554436 [ 5.427965] EXT4-fs (md0): 1 orphan inode deleted [ 5.427967] EXT4-fs (md0): recovery complete [ 5.429131] JBD: barrier-based sync failed on md0-8 - disabling barriers [ 5.431013] EXT4-fs (md0): mounted filesystem with ordered data mode [ 6.770356] usb-storage: device scan complete [ 6.771100] scsi 6:0:0:0: Direct-Access Canon MP610 series 1020 PQ: 0 ANSI: 2 [ 6.771378] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 6.773587] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 6.896650] Adding 9735160k swap on /dev/sda2. Priority:-1 extents:1 across:9735160k [ 6.931686] Adding 4881400k swap on /dev/sdb1. Priority:-2 extents:1 across:4881400k [ 6.936671] Adding 9735160k swap on /dev/sdb2. Priority:-3 extents:1 across:9735160k [ 7.160403] usb-storage: device scan complete [ 7.161517] scsi 7:0:0:0: Direct-Access OCZ ATV 1100 PQ: 0 ANSI: 0 CCS [ 7.161809] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 7.162627] sd 7:0:0:0: [sdd] 62652416 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 7.163376] sd 7:0:0:0: [sdd] Write Protect is off [ 7.163378] sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 7.163380] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 7.166758] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 7.166803] sdd: sdd1 [ 7.169126] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 7.169166] sd 7:0:0:0: [sdd] Attached SCSI removable disk [ 7.228183] udev: starting version 151 [ 7.620345] type=1505 audit(1269986871.893:2): operation="profile_load" pid=644 name="/sbin/dhclient3" [ 7.620570] type=1505 audit(1269986871.893:3): operation="profile_load" pid=644 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.620703] type=1505 audit(1269986871.893:4): operation="profile_load" pid=644 name="/usr/lib/connman/scripts/dhclient-script" [ 7.960546] Bluetooth: Core ver 2.15 [ 7.960597] NET: Registered protocol family 31 [ 7.960599] Bluetooth: HCI device and connection manager initialized [ 7.960602] Bluetooth: HCI socket layer initialized [ 7.995401] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 7.995446] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.014932] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 8.015024] usbcore: registered new interface driver btusb [ 8.109470] EDAC MC: Ver: 2.1.0 Mar 26 2010 [ 8.119442] vga16fb: initializing [ 8.119446] vga16fb: mapped to 0xffff8800000a0000 [ 8.119503] fb0: VGA16 VGA frame buffer device [ 8.125265] EDAC amd64_edac: Ver: 3.2.0 Mar 26 2010 [ 8.125320] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 8.125327] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 8.125328] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 8.125329] (Note that use of the override may cause unknown side effects.) [ 8.125343] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 8.164022] lp: driver loaded but no devices found [ 8.370029] usb 1-8: reset high speed USB device using ehci_hcd and address 7 [ 8.499008] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 8.499012] Disabling lock debugging due to kernel taint [ 8.555000] [fglrx] Maximum main memory to use for locked dma buffers: 7027 MBytes. [ 8.555095] [fglrx] vendor: 1002 device: 9505 count: 1 [ 8.555321] [fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 8.555335] pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8.555339] pci 0000:01:00.0: setting latency timer to 64 [ 8.555506] [fglrx] Kernel PAT support is enabled [ 8.555524] [fglrx] module loaded - fglrx 8.72.10 [Mar 11 2010] with 1 minors [ 8.680351] Console: switching to colour frame buffer device 80x30 [ 8.740033] usb 1-8: reset high speed USB device using ehci_hcd and address 7 [ 8.773697] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.160127] usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1725 [ 9.160152] usbcore: registered new interface driver usblp [ 9.254040] hda_codec: AD1988B: BIOS auto-probing. [ 9.254118] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8 [ 9.262821] HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 9.262860] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 34.471448] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 35.035894] type=1505 audit(1269986899.303:5): operation="profile_replace" pid=1049 name="/sbin/dhclient3" [ 35.036123] type=1505 audit(1269986899.303:6): operation="profile_replace" pid=1049 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 35.036252] type=1505 audit(1269986899.303:7): operation="profile_replace" pid=1049 name="/usr/lib/connman/scripts/dhclient-script" [ 35.042741] type=1505 audit(1269986899.313:8): operation="profile_load" pid=1048 name="/usr/share/gdm/guest-session/Xsession" [ 35.054612] type=1505 audit(1269986899.323:9): operation="profile_load" pid=1054 name="/usr/sbin/mysqld" [ 35.055177] type=1505 audit(1269986899.323:10): operation="profile_load" pid=1052 name="/usr/lib/cups/backend/cups-pdf" [ 35.055458] type=1505 audit(1269986899.323:11): operation="profile_load" pid=1052 name="/usr/sbin/cupsd" [ 35.056858] type=1505 audit(1269986899.323:12): operation="profile_load" pid=1055 name="/usr/sbin/mysqld-akonadi" [ 35.061012] type=1505 audit(1269986899.333:13): operation="profile_load" pid=1056 name="/usr/sbin/named" [ 35.064046] type=1505 audit(1269986899.333:14): operation="profile_load" pid=1053 name="/usr/sbin/dhcpd3" [ 36.492223] JBD: barrier-based sync failed on md0-8 - disabling barriers [ 36.745853] dahdi: Telephony Interface Registered on major 196 [ 36.745856] dahdi: Version: [ 36.754866] dahdi_dummy: Trying to load High Resolution Timer [ 36.754868] dahdi_dummy: Initialized High Resolution Timer [ 36.754870] dahdi_dummy: Starting High Resolution Timer [ 36.754872] dahdi_dummy: High Resolution Timer started, good to go [ 36.772232] dahdi_transcode: Loaded. [ 37.443879] dahdi: Registered tone zone 0 (United States / North America) [ 37.530960] [drm] Initialized drm 1.1.0 20060810 [ 37.605731] [drm] radeon defaulting to kernel modesetting. [ 37.605733] [drm] radeon kernel modesetting enabled. [ 37.846751] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 37.846754] vboxdrv: Successfully done. [ 37.846756] vboxdrv: Found 4 processor cores. [ 37.846832] VBoxDrv: dbg - g_abExecMemory=ffffffffa05e4860 [ 37.846871] vboxdrv: fAsync=0 offMin=0x2ef offMax=0x1578 [ 37.847027] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 37.847027] vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001). [ 38.205798] Bluetooth: L2CAP ver 2.14 [ 38.205800] Bluetooth: L2CAP socket layer initialized [ 38.395832] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 38.395835] Bluetooth: BNEP filters: protocol multicast [ 38.550732] Bridge firewalling registered [ 38.936286] Bluetooth: SCO (Voice Link) ver 0.6 [ 38.936288] Bluetooth: SCO socket layer initialized [ 39.347652] Bluetooth: RFCOMM TTY layer initialized [ 39.347656] Bluetooth: RFCOMM socket layer initialized [ 39.347657] Bluetooth: RFCOMM ver 1.11 [ 41.198824] ppdev: user-space parallel port driver [ 42.541221] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 42.768229] usb 1-4: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 97.638195] rtusb init ---> [ 97.638324] [ 97.638325] [ 97.638326] === pAd = ffffc90013d86000, size = 515160 === [ 97.638327] [ 97.638395] <-- RTMPAllocAdapterBlock, Status=0 [ 97.638958] usbcore: registered new interface driver rt2870 [ 97.922690] <-- RTMPAllocTxRxRingMemory, Status=0 [ 97.924264] -->RTUSBVenderReset [ 97.924388] <--RTUSBVenderReset [ 98.204890] Key2Str is Invalid key length(0) or Type(0) [ 98.204906] Key3Str is Invalid key length(0) or Type(0) [ 98.204924] Key4Str is Invalid key length(0) or Type(0) [ 98.205198] 1. Phy Mode = 5 [ 98.205199] 2. Phy Mode = 5 [ 98.247668] 3. Phy Mode = 9 [ 98.255676] MCS Set = ff ff 00 00 01 [ 98.264926] <==== rt28xx_init, Status=0 [ 98.266427] 0x1300 = 00064300 [ 103.360033] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 108.600005] ra0: no IPv6 routers present [ 113.366362] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 113.366595] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) [ 113.511127] Rcv Wcid(1) AddBAReq [ 113.511131] Start Seq = 00000000 [ 153.732904] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 771 [ 193.734903] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 771 [ 193.863651] Rcv Wcid(1) AddBAReq [ 193.863655] Start Seq = 00000ebd [ 203.418991] eda, flush one! [ 253.735527] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 771 [ 275.047188] DeQueueRunning[0]= TRUE! [ 333.734244] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 771 [ 415.577126] ACT - Update2040CoexistFrameAndNotify.BSSCoex=1.EventANo=1,EventBCD=0 [ 415.577130] ACT - BuildIntolerantChannelRep , Total Channel number = 1 [ 415.577132] ACT-BuildIntolerantChannelRep(Size=4) [ 433.735903] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 771 [ 454.369570] usb 1-4: usbfs: interface 1 claimed by usblp while 'simple-scan' sets config #1 [ 457.171980] usb 1-4: usbfs: interface 1 claimed by usblp while 'simple-scan' sets config #1 [ 458.174179] usb 1-4: usbfs: interface 1 claimed by usblp while 'simple-scan' sets config #1 [ 495.337284] __ratelimit: 12 callbacks suppressed [ 495.337288] evolution-data-[3054]: segfault at 1 ip 00007f40e4bacb5d sp 00007f40dd8efdb0 error 4 in libecalbackendcontacts.so[7f40e4ba8000+7000] [ 553.734897] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 673.738243] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 673.970650] usb 1-4: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 716.086990] ACT - Update2040CoexistFrameAndNotify.BSSCoex=1.EventANo=1,EventBCD=0 [ 716.086994] ACT - BuildIntolerantChannelRep , Total Channel number = 1 [ 716.086996] ACT-BuildIntolerantChannelRep(Size=4) [ 793.733902] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 913.734903] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 1017.095890] ACT - Update2040CoexistFrameAndNotify.BSSCoex=1.EventANo=1,EventBCD=0 [ 1017.095894] ACT - BuildIntolerantChannelRep , Total Channel number = 1 [ 1017.095896] ACT-BuildIntolerantChannelRep(Size=4) [ 1033.733780] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 1150.147935] usb 1-4: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [ 1152.500199] usb 1-4: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [ 1153.502198] usb 1-4: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1 [ 1153.730731] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 1273.735427] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 1318.438144] ACT - Update2040CoexistFrameAndNotify.BSSCoex=1.EventANo=1,EventBCD=0 [ 1318.438148] ACT - BuildIntolerantChannelRep , Total Channel number = 1 [ 1318.438150] ACT-BuildIntolerantChannelRep(Size=4) [ 1393.735457] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 771 [ 1410.450589] usb 1-4: usbfs: interface 0 claimed by usbfs while 'usb' sets config #1 [ 1513.737903] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 771 [ 1619.497011] ACT - Update2040CoexistFrameAndNotify.BSSCoex=1.EventANo=1,EventBCD=0 [ 1619.497015] ACT - BuildIntolerantChannelRep , Total Channel number = 1 [ 1619.497017] ACT-BuildIntolerantChannelRep(Size=4) [ 1633.735483] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 771 [ 1753.738184] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 1873.734945] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 1919.796792] ACT - Update2040CoexistFrameAndNotify.BSSCoex=1.EventANo=1,EventBCD=0 [ 1919.796796] ACT - BuildIntolerantChannelRep , Total Channel number = 1 [ 1919.796798] ACT-BuildIntolerantChannelRep(Size=4) [ 1993.732762] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 771 [ 2047.455699] DeQueueRunning[0]= TRUE! [ 2113.734675] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 2220.276844] ACT - Update2040CoexistFrameAndNotify.BSSCoex=1.EventANo=1,EventBCD=0 [ 2220.276848] ACT - BuildIntolerantChannelRep , Total Channel number = 1 [ 2220.276850] ACT-BuildIntolerantChannelRep(Size=4) [ 2233.732361] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 814 [ 2292.800438] usb 1-4: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 2353.729656] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 2359.534198] 82f, flush one! [ 2362.137587] c68, flush one! [ 2366.316027] 37c, flush one! [ 2372.060747] d75, flush one! [ 2377.283531] 66f, flush one! [ 2383.704552] 1a6, flush one! [ 2385.838016] 500, flush one! [ 2408.000028] b6e, flush one! [ 2470.716917] DeQueueRunning[0]= TRUE! [ 2473.733902] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 2520.766892] ACT - Update2040CoexistFrameAndNotify.BSSCoex=1.EventANo=1,EventBCD=0 [ 2520.766896] ACT - BuildIntolerantChannelRep , Total Channel number = 1 [ 2520.766898] ACT-BuildIntolerantChannelRep(Size=4) [ 2593.736088] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 2713.736725] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581 [ 2821.628489] ACT - Update2040CoexistFrameAndNotify.BSSCoex=1.EventANo=1,EventBCD=0 [ 2821.628495] ACT - BuildIntolerantChannelRep , Total Channel number = 1 [ 2821.628497] ACT-BuildIntolerantChannelRep(Size=4) [ 2833.737743] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 581