[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-39-generic (buildd@lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #62-Ubuntu SMP Thu Feb 28 00:28:53 UTC 2013 (Ubuntu 3.2.0-39.62-generic 3.2.39) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic root=UUID=545e4695-71d8-4b01-b630-06e6172998b0 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000befe9000 (usable) [ 0.000000] BIOS-e820: 00000000befe9000 - 00000000bf074000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf074000 - 00000000bf152000 (reserved) [ 0.000000] BIOS-e820: 00000000bf152000 - 00000000bf153000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf153000 - 00000000bf2a6000 (reserved) [ 0.000000] BIOS-e820: 00000000bf2a6000 - 00000000bf2a7000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf2a7000 - 00000000bf2b7000 (reserved) [ 0.000000] BIOS-e820: 00000000bf2b7000 - 00000000bf2b8000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf2b8000 - 00000000bf2bf000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf2bf000 - 00000000bf2c5000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf2c5000 - 00000000bf2ec000 (reserved) [ 0.000000] BIOS-e820: 00000000bf2ec000 - 00000000bf4ef000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf4ef000 - 00000000bf77a000 (usable) [ 0.000000] BIOS-e820: 00000000bf77a000 - 00000000bfeec000 (reserved) [ 0.000000] BIOS-e820: 00000000bfeec000 - 00000000bff00000 (usable) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved) [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100001000 - 0000000240000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: MSI MS-7640/990FXA-GD65 (MS-7640), BIOS V19.9 10/08/2012 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BFF00000 mask FFFFFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000240000000 aka 9216M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] total RAM covered: 3071M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fce30] fce30 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bff00000 [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bff00000 page 4k [ 0.000000] kernel direct mapping tables up to bff00000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100001000-0000000240000000 [ 0.000000] 0100001000 - 0100200000 page 4k [ 0.000000] 0100200000 - 0140000000 page 2M [ 0.000000] 0140000000 - 0240000000 page 1G [ 0.000000] kernel direct mapping tables up to 240000000 @ bfefd000-bff00000 [ 0.000000] RAMDISK: 364d6000 - 37263000 [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000bf2b8068 00054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000bf2bdf18 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) [ 0.000000] ACPI: DSDT 00000000bf2b8150 05DC2 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf2bff80 00040 [ 0.000000] ACPI: APIC 00000000bf2be010 0009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000bf2be0b0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 00000000bf2be0f0 00038 (v01 ALASKA A M I 01072009 AMI 00000004) [ 0.000000] ACPI: SSDT 00000000bf2be128 00E10 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: BGRT 00000000bf2bef38 0003C (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000befe9 [ 0.000000] 0: 0x000bf4ef -> 0x000bf77a [ 0.000000] 0: 0x000bfeec -> 0x000bff00 [ 0.000000] 0: 0x00100001 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2093589 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 762568 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1290239 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000befe9000 - 00000000bf074000 [ 0.000000] PM: Registered nosave memory: 00000000bf074000 - 00000000bf152000 [ 0.000000] PM: Registered nosave memory: 00000000bf152000 - 00000000bf153000 [ 0.000000] PM: Registered nosave memory: 00000000bf153000 - 00000000bf2a6000 [ 0.000000] PM: Registered nosave memory: 00000000bf2a6000 - 00000000bf2a7000 [ 0.000000] PM: Registered nosave memory: 00000000bf2a7000 - 00000000bf2b7000 [ 0.000000] PM: Registered nosave memory: 00000000bf2b7000 - 00000000bf2b8000 [ 0.000000] PM: Registered nosave memory: 00000000bf2b8000 - 00000000bf2bf000 [ 0.000000] PM: Registered nosave memory: 00000000bf2bf000 - 00000000bf2c5000 [ 0.000000] PM: Registered nosave memory: 00000000bf2c5000 - 00000000bf2ec000 [ 0.000000] PM: Registered nosave memory: 00000000bf2ec000 - 00000000bf4ef000 [ 0.000000] PM: Registered nosave memory: 00000000bf77a000 - 00000000bfeec000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000 [ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000 [ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000 [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000 [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000 [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000 [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000 [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:3ed00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s83136 r8192 d23360 u262144 [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2056720 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic root=UUID=545e4695-71d8-4b01-b630-06e6172998b0 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ f0e8000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000 [ 0.000000] Memory: 8081088k/9437184k available (6571k kernel code, 1062828k absent, 293268k reserved, 6632k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:1288 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3200.129 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.25 BogoMIPS (lpj=12800516) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004026] Security Framework initialized [ 0.004036] AppArmor: AppArmor initialized [ 0.004037] Yama: becoming mindful. [ 0.004465] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006601] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.007589] Mount-cache hash table entries: 256 [ 0.008041] Initializing cgroup subsys cpuacct [ 0.008045] Initializing cgroup subsys memory [ 0.008052] Initializing cgroup subsys devices [ 0.008053] Initializing cgroup subsys freezer [ 0.008055] Initializing cgroup subsys blkio [ 0.008060] Initializing cgroup subsys perf_event [ 0.008082] tseg: 00bff00000 [ 0.008084] CPU: Physical Processor ID: 0 [ 0.008085] CPU: Processor Core ID: 0 [ 0.008087] mce: CPU supports 6 MCE banks [ 0.009154] ACPI: Core revision 20110623 [ 0.012016] ftrace: allocating 26551 entries in 105 pages [ 0.016394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.056233] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.060003] Performance Events: AMD PMU driver. [ 0.060003] ... version: 0 [ 0.060003] ... bit width: 48 [ 0.060003] ... generic registers: 4 [ 0.060003] ... value mask: 0000ffffffffffff [ 0.060003] ... max period: 00007fffffffffff [ 0.060003] ... fixed-purpose events: 0 [ 0.060003] ... event mask: 000000000000000f [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.060003] Booting Node 0, Processors #1 [ 0.060003] smpboot cpu 1: start_ip = 99000 [ 0.148023] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148078] #2 [ 0.148079] smpboot cpu 2: start_ip = 99000 [ 0.240027] NMI watchdog enabled, takes one hw-pmu counter. [ 0.240075] #3 [ 0.240076] smpboot cpu 3: start_ip = 99000 [ 0.332032] NMI watchdog enabled, takes one hw-pmu counter. [ 0.332108] #4 [ 0.332109] smpboot cpu 4: start_ip = 99000 [ 0.424037] NMI watchdog enabled, takes one hw-pmu counter. [ 0.424116] #5 [ 0.424117] smpboot cpu 5: start_ip = 99000 [ 0.516052] NMI watchdog enabled, takes one hw-pmu counter. [ 0.516068] Brought up 6 CPUs [ 0.516070] Total of 6 processors activated (38401.02 BogoMIPS). [ 0.520187] devtmpfs: initialized [ 0.525100] EVM: security.selinux [ 0.525101] EVM: security.SMACK64 [ 0.525102] EVM: security.capability [ 0.525164] PM: Registering ACPI NVS region at befe9000 (569344 bytes) [ 0.525164] PM: Registering ACPI NVS region at bf152000 (4096 bytes) [ 0.525164] PM: Registering ACPI NVS region at bf2a6000 (4096 bytes) [ 0.525164] PM: Registering ACPI NVS region at bf2b7000 (4096 bytes) [ 0.525164] PM: Registering ACPI NVS region at bf2bf000 (24576 bytes) [ 0.525164] PM: Registering ACPI NVS region at bf2ec000 (2109440 bytes) [ 0.525164] print_constraints: dummy: [ 0.525164] RTC time: 19:57:52, date: 03/30/13 [ 0.525164] NET: Registered protocol family 16 [ 0.525164] node 0 link 0: io port [c000, ffff] [ 0.525164] TOM: 00000000c0000000 aka 3072M [ 0.525164] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.525164] node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff] [ 0.525164] TOM2: 0000000240000000 aka 9216M [ 0.525164] bus: [00, 1f] on node 0 link 0 [ 0.525164] bus: 00 index 0 [io 0x0000-0xffff] [ 0.525164] bus: 00 index 1 [mem 0xc0000000-0xdfffffff] [ 0.525164] bus: 00 index 2 [mem 0xf0000000-0xffffffff] [ 0.525164] bus: 00 index 3 [mem 0x240000000-0xfcffffffff] [ 0.525164] Extended Config Space enabled on 1 nodes [ 0.525164] ACPI: bus type pci registered [ 0.525164] Trying to unpack rootfs image as initramfs... [ 0.525164] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.525164] PCI: not using MMCONFIG [ 0.525164] PCI: Using configuration type 1 for base access [ 0.525164] PCI: Using configuration type 1 for extended access [ 0.525613] bio: create slab at 0 [ 0.525613] ACPI: Added _OSI(Module Device) [ 0.525613] ACPI: Added _OSI(Processor Device) [ 0.525613] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.525613] ACPI: Added _OSI(Processor Aggregator Device) [ 0.525613] ACPI: EC: Look up EC in DSDT [ 0.528086] ACPI: Executed 2 blocks of module-level executable AML code [ 0.552398] ACPI: Interpreter enabled [ 0.552403] ACPI: (supports S0 S1 S3 S4 S5) [ 0.552418] ACPI: Using IOAPIC for interrupt routing [ 0.552528] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.552554] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.701599] Freeing initrd memory: 13876k freed [ 0.753706] ACPI: No dock devices found. [ 0.753708] HEST: Table not found. [ 0.753711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.753806] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.753946] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] [ 0.753948] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] [ 0.753949] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] [ 0.753951] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.753952] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.753953] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.753955] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 0.753967] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600 [ 0.754017] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604 [ 0.754044] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.754047] pci 0000:00:02.0: PME# disabled [ 0.754058] pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604 [ 0.754084] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.754086] pci 0000:00:05.0: PME# disabled [ 0.754096] pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604 [ 0.754122] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.754124] pci 0000:00:06.0: PME# disabled [ 0.754134] pci 0000:00:07.0: [1002:5a1b] type 1 class 0x000604 [ 0.754159] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.754161] pci 0000:00:07.0: PME# disabled [ 0.754172] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604 [ 0.754198] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.754200] pci 0000:00:0a.0: PME# disabled [ 0.754218] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.754232] pci 0000:00:11.0: reg 10: [io 0xf090-0xf097] [ 0.754239] pci 0000:00:11.0: reg 14: [io 0xf080-0xf083] [ 0.754245] pci 0000:00:11.0: reg 18: [io 0xf070-0xf077] [ 0.754252] pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063] [ 0.754259] pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f] [ 0.754266] pci 0000:00:11.0: reg 24: [mem 0xfeb0b000-0xfeb0b3ff] [ 0.754280] pci 0000:00:11.0: set SATA to AHCI mode [ 0.754314] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.754323] pci 0000:00:12.0: reg 10: [mem 0xfeb0a000-0xfeb0afff] [ 0.754375] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.754388] pci 0000:00:12.2: reg 10: [mem 0xfeb09000-0xfeb090ff] [ 0.754446] pci 0000:00:12.2: supports D1 D2 [ 0.754447] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.754450] pci 0000:00:12.2: PME# disabled [ 0.754464] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.754473] pci 0000:00:13.0: reg 10: [mem 0xfeb08000-0xfeb08fff] [ 0.754523] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.754536] pci 0000:00:13.2: reg 10: [mem 0xfeb07000-0xfeb070ff] [ 0.754594] pci 0000:00:13.2: supports D1 D2 [ 0.754595] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.754598] pci 0000:00:13.2: PME# disabled [ 0.754612] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.754663] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.754673] pci 0000:00:14.1: reg 10: [io 0xf040-0xf047] [ 0.754679] pci 0000:00:14.1: reg 14: [io 0xf030-0xf033] [ 0.754686] pci 0000:00:14.1: reg 18: [io 0xf020-0xf027] [ 0.754693] pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013] [ 0.754699] pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f] [ 0.754726] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.754741] pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.754787] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.754790] pci 0000:00:14.2: PME# disabled [ 0.754799] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.754852] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.754882] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.754891] pci 0000:00:14.5: reg 10: [mem 0xfeb06000-0xfeb06fff] [ 0.754939] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 0.754948] pci 0000:00:16.0: reg 10: [mem 0xfeb05000-0xfeb05fff] [ 0.754998] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 0.755011] pci 0000:00:16.2: reg 10: [mem 0xfeb04000-0xfeb040ff] [ 0.755068] pci 0000:00:16.2: supports D1 D2 [ 0.755070] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.755072] pci 0000:00:16.2: PME# disabled [ 0.755086] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.755098] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.755108] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.755117] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.755129] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.755169] pci 0000:01:00.0: [1002:6798] type 0 class 0x000300 [ 0.755178] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.755186] pci 0000:01:00.0: reg 18: [mem 0xfea00000-0xfea3ffff 64bit] [ 0.755191] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] [ 0.755200] pci 0000:01:00.0: reg 30: [mem 0xfea40000-0xfea5ffff pref] [ 0.755228] pci 0000:01:00.0: supports D1 D2 [ 0.755229] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.755231] pci 0000:01:00.0: PME# disabled [ 0.755252] pci 0000:01:00.1: [1002:aaa0] type 0 class 0x000403 [ 0.755262] pci 0000:01:00.1: reg 10: [mem 0xfea60000-0xfea63fff 64bit] [ 0.755308] pci 0000:01:00.1: supports D1 D2 [ 0.760091] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.760103] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.760112] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.760121] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.760197] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.760219] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff] [ 0.760249] pci 0000:02:00.0: reg 18: [mem 0xd0204000-0xd0204fff 64bit pref] [ 0.760270] pci 0000:02:00.0: reg 20: [mem 0xd0200000-0xd0203fff 64bit pref] [ 0.760349] pci 0000:02:00.0: supports D1 D2 [ 0.760352] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.760358] pci 0000:02:00.0: PME# disabled [ 0.768092] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 0.768104] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] [ 0.768115] pci 0000:00:05.0: bridge window [mem 0xd0200000-0xd02fffff 64bit pref] [ 0.768191] pci 0000:03:00.0: [10e3:8113] type 1 class 0x000604 [ 0.768279] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 0.768288] pci 0000:03:00.0: PME# disabled [ 0.776096] pci 0000:00:06.0: PCI bridge to [bus 03-04] [ 0.776113] pci 0000:00:06.0: bridge window [mem 0xd0100000-0xd01fffff 64bit pref] [ 0.776198] pci 0000:04:05.0: [1bb3:5310] type 0 class 0x000400 [ 0.776222] pci 0000:04:05.0: reg 10: [mem 0xd0100000-0xd010ffff pref] [ 0.776357] pci 0000:03:00.0: PCI bridge to [bus 04-04] [ 0.776370] pci 0000:03:00.0: bridge window [mem 0xd0100000-0xd01fffff 64bit pref] [ 0.776408] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03 [ 0.776422] pci 0000:05:00.0: reg 10: [mem 0xfe900000-0xfe901fff 64bit] [ 0.776489] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.776492] pci 0000:05:00.0: PME# disabled [ 0.784098] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 0.784111] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.784195] pci 0000:06:00.0: [11ab:4362] type 0 class 0x000200 [ 0.784222] pci 0000:06:00.0: reg 10: [mem 0xfe820000-0xfe823fff 64bit] [ 0.784238] pci 0000:06:00.0: reg 18: [io 0xc000-0xc0ff] [ 0.784280] pci 0000:06:00.0: reg 30: [mem 0xfe800000-0xfe81ffff pref] [ 0.784351] pci 0000:06:00.0: supports D1 D2 [ 0.784353] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.784357] pci 0000:06:00.0: PME# disabled [ 0.784372] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.784381] pci 0000:00:0a.0: PCI bridge to [bus 06-06] [ 0.784384] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 0.784386] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.784409] pci 0000:07:06.0: [1822:4e35] type 0 class 0x000480 [ 0.784422] pci 0000:07:06.0: reg 10: [mem 0xd0000000-0xd0000fff pref] [ 0.784509] pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode) [ 0.784516] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd00fffff pref] [ 0.784518] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) [ 0.784520] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 0.784522] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) [ 0.784524] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.784526] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.784527] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.784529] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.784544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.784620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.784656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT] [ 0.784684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT] [ 0.784699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT] [ 0.784714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT] [ 0.784733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT] [ 0.784753] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.784755] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.784756] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.788359] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.788401] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.788442] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.788485] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 [ 0.788516] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.788539] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.788562] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.788585] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.788687] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.788687] vgaarb: loaded [ 0.788687] vgaarb: bridge control possible 0000:01:00.0 [ 0.788687] i2c-core: driver [aat2870] using legacy suspend method [ 0.788687] i2c-core: driver [aat2870] using legacy resume method [ 0.788687] SCSI subsystem initialized [ 0.788687] libata version 3.00 loaded. [ 0.788687] usbcore: registered new interface driver usbfs [ 0.788687] usbcore: registered new interface driver hub [ 0.788687] usbcore: registered new device driver usb [ 0.788687] PCI: Using ACPI for IRQ routing [ 0.794896] PCI: pci_cache_line_size set to 64 bytes [ 0.794966] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.794968] reserve RAM buffer: 00000000befe9000 - 00000000bfffffff [ 0.794970] reserve RAM buffer: 00000000bf77a000 - 00000000bfffffff [ 0.794971] reserve RAM buffer: 00000000bff00000 - 00000000bfffffff [ 0.795035] NetLabel: Initializing [ 0.795036] NetLabel: domain hash size = 128 [ 0.795037] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.795044] NetLabel: unlabeled traffic allowed by default [ 0.795078] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.795078] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.797073] Switching to clocksource hpet [ 0.800603] AppArmor: AppArmor Filesystem Enabled [ 0.800619] pnp: PnP ACPI init [ 0.800629] ACPI: bus type pnp registered [ 0.800720] pnp 00:00: [bus 00-ff] [ 0.800723] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.800725] pnp 00:00: [io 0x0000-0x03af window] [ 0.800726] pnp 00:00: [io 0x03e0-0x0cf7 window] [ 0.800728] pnp 00:00: [io 0x03b0-0x03df window] [ 0.800729] pnp 00:00: [io 0x0d00-0xffff window] [ 0.800731] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.800732] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.800734] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 0.800735] pnp 00:00: [mem 0x00000000 window] [ 0.800771] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.800789] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.800824] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.800826] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.800943] pnp 00:02: [io 0x040b] [ 0.800945] pnp 00:02: [io 0x04d6] [ 0.800946] pnp 00:02: [io 0x0c00-0x0c01] [ 0.800947] pnp 00:02: [io 0x0c14] [ 0.800948] pnp 00:02: [io 0x0c50-0x0c51] [ 0.800949] pnp 00:02: [io 0x0c52] [ 0.800950] pnp 00:02: [io 0x0c6c] [ 0.800951] pnp 00:02: [io 0x0c6f] [ 0.800953] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.800954] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.800955] pnp 00:02: [io 0x0cd4-0x0cd5] [ 0.800956] pnp 00:02: [io 0x0cd6-0x0cd7] [ 0.800957] pnp 00:02: [io 0x0cd8-0x0cdf] [ 0.800958] pnp 00:02: [io 0x0800-0x089f] [ 0.800960] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 0.800961] pnp 00:02: [io 0x0000-0x000f] [ 0.800963] pnp 00:02: [io 0x0b20-0x0b3f] [ 0.800964] pnp 00:02: [io 0x0900-0x090f] [ 0.800965] pnp 00:02: [io 0x0910-0x091f] [ 0.800966] pnp 00:02: [io 0xfe00-0xfefe] [ 0.800967] pnp 00:02: [io 0x0060-0x005f disabled] [ 0.800969] pnp 00:02: [io 0x0064-0x0063 disabled] [ 0.800970] pnp 00:02: [io 0x0485-0x0486] [ 0.800971] pnp 00:02: [mem 0xfec00000-0xfec00fff] [ 0.800973] pnp 00:02: [mem 0xfee00000-0xfee00fff] [ 0.800974] pnp 00:02: [mem 0xfed80000-0xfed8ffff] [ 0.800975] pnp 00:02: [mem 0xfed61000-0xfed70fff] [ 0.800976] pnp 00:02: [mem 0xfec10000-0xfec10fff] [ 0.800978] pnp 00:02: [mem 0xfed00000-0xfed00fff] [ 0.800979] pnp 00:02: [mem 0xff800000-0xffffffff] [ 0.801026] system 00:02: [io 0x040b] has been reserved [ 0.801027] system 00:02: [io 0x04d6] has been reserved [ 0.801029] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.801031] system 00:02: [io 0x0c14] has been reserved [ 0.801032] system 00:02: [io 0x0c50-0x0c51] has been reserved [ 0.801034] system 00:02: [io 0x0c52] has been reserved [ 0.801035] system 00:02: [io 0x0c6c] has been reserved [ 0.801037] system 00:02: [io 0x0c6f] has been reserved [ 0.801038] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.801040] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.801042] system 00:02: [io 0x0cd4-0x0cd5] has been reserved [ 0.801043] system 00:02: [io 0x0cd6-0x0cd7] has been reserved [ 0.801045] system 00:02: [io 0x0cd8-0x0cdf] has been reserved [ 0.801047] system 00:02: [io 0x0800-0x089f] has been reserved [ 0.801048] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.801050] system 00:02: [io 0x0900-0x090f] has been reserved [ 0.801052] system 00:02: [io 0x0910-0x091f] has been reserved [ 0.801053] system 00:02: [io 0xfe00-0xfefe] has been reserved [ 0.801055] system 00:02: [io 0x0485-0x0486] has been reserved [ 0.801057] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.801059] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.801061] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.801063] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.801065] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.801067] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.801069] system 00:02: [mem 0xff800000-0xffffffff] has been reserved [ 0.801071] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.801140] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 0.801145] pnp 00:03: [io 0x0a00-0x0a0f] [ 0.801146] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 0.801148] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 0.801175] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.801177] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.801201] pnp 00:04: [irq 12] [ 0.801221] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.801311] pnp 00:05: [io 0x03f8-0x03ff] [ 0.801314] pnp 00:05: [irq 4] [ 0.801315] pnp 00:05: [dma 0 disabled] [ 0.801350] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.801357] pnp 00:06: [dma 4] [ 0.801358] pnp 00:06: [io 0x0000-0x000f] [ 0.801359] pnp 00:06: [io 0x0081-0x0083] [ 0.801360] pnp 00:06: [io 0x0087] [ 0.801362] pnp 00:06: [io 0x0089-0x008b] [ 0.801363] pnp 00:06: [io 0x008f] [ 0.801364] pnp 00:06: [io 0x00c0-0x00df] [ 0.801380] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.801385] pnp 00:07: [io 0x0070-0x0071] [ 0.801388] pnp 00:07: [irq 8] [ 0.801403] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.801407] pnp 00:08: [io 0x0061] [ 0.801423] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.801435] pnp 00:09: [io 0x0010-0x001f] [ 0.801436] pnp 00:09: [io 0x0022-0x003f] [ 0.801438] pnp 00:09: [io 0x0044-0x005f] [ 0.801439] pnp 00:09: [io 0x0062-0x0063] [ 0.801440] pnp 00:09: [io 0x0065-0x006f] [ 0.801441] pnp 00:09: [io 0x0072-0x007f] [ 0.801443] pnp 00:09: [io 0x0080] [ 0.801444] pnp 00:09: [io 0x0084-0x0086] [ 0.801445] pnp 00:09: [io 0x0088] [ 0.801446] pnp 00:09: [io 0x008c-0x008e] [ 0.801447] pnp 00:09: [io 0x0090-0x009f] [ 0.801450] pnp 00:09: [io 0x00a2-0x00bf] [ 0.801451] pnp 00:09: [io 0x00e0-0x00ef] [ 0.801452] pnp 00:09: [io 0x04d0-0x04d1] [ 0.801486] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.801488] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.801493] pnp 00:0a: [io 0x00f0-0x00ff] [ 0.801496] pnp 00:0a: [irq 13] [ 0.801512] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.801544] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.801556] pnp 00:0c: [io 0x0060] [ 0.801557] pnp 00:0c: [io 0x0064] [ 0.801560] pnp 00:0c: [irq 1] [ 0.801580] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.801643] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.801676] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.801728] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.801729] pnp 00:0e: [mem 0xfec20000-0xfec200ff] [ 0.801764] system 00:0e: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.801766] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.801835] pnp 00:0f: [mem 0xfed00000-0xfed003ff] [ 0.801858] pnp 00:0f: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.801861] pnp: PnP ACPI: found 16 devices [ 0.801862] ACPI: ACPI bus type pnp unregistered [ 0.808124] PCI: max bus depth: 2 pci_try_num: 3 [ 0.808149] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.808151] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.808154] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.808156] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.808159] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 0.808161] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] [ 0.808163] pci 0000:00:05.0: bridge window [mem 0xd0200000-0xd02fffff 64bit pref] [ 0.808166] pci 0000:03:00.0: PCI bridge to [bus 04-04] [ 0.808172] pci 0000:03:00.0: bridge window [mem 0xd0100000-0xd01fffff 64bit pref] [ 0.808178] pci 0000:00:06.0: PCI bridge to [bus 03-04] [ 0.808181] pci 0000:00:06.0: bridge window [mem 0xd0100000-0xd01fffff 64bit pref] [ 0.808183] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 0.808186] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.808189] pci 0000:00:0a.0: PCI bridge to [bus 06-06] [ 0.808190] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 0.808193] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.808196] pci 0000:00:14.4: PCI bridge to [bus 07-07] [ 0.808201] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd00fffff pref] [ 0.808215] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.808217] pci 0000:00:02.0: setting latency timer to 64 [ 0.808221] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.808223] pci 0000:00:05.0: setting latency timer to 64 [ 0.808229] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.808231] pci 0000:00:06.0: setting latency timer to 64 [ 0.808237] pci 0000:03:00.0: setting latency timer to 64 [ 0.808240] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.808242] pci 0000:00:07.0: setting latency timer to 64 [ 0.808247] pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 0.808249] pci 0000:00:0a.0: setting latency timer to 64 [ 0.808254] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.808256] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.808257] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 0.808259] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 0.808260] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 0.808262] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 0.808263] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff] [ 0.808265] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.808266] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.808268] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.808270] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.808271] pci_bus 0000:02: resource 2 [mem 0xd0200000-0xd02fffff 64bit pref] [ 0.808273] pci_bus 0000:03: resource 2 [mem 0xd0100000-0xd01fffff 64bit pref] [ 0.808275] pci_bus 0000:04: resource 2 [mem 0xd0100000-0xd01fffff 64bit pref] [ 0.808277] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.808278] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 0.808280] pci_bus 0000:06: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.808282] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff pref] [ 0.808283] pci_bus 0000:07: resource 4 [io 0x0000-0x03af] [ 0.808285] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7] [ 0.808286] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df] [ 0.808288] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff] [ 0.808289] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff] [ 0.808291] pci_bus 0000:07: resource 9 [mem 0x000c0000-0x000dffff] [ 0.808293] pci_bus 0000:07: resource 10 [mem 0xc0000000-0xffffffff] [ 0.808319] NET: Registered protocol family 2 [ 0.808456] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.809378] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.811446] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.811701] TCP: Hash tables configured (established 524288 bind 65536) [ 0.811703] TCP reno registered [ 0.811712] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.811755] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.811863] NET: Registered protocol family 1 [ 0.811896] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.892070] pci 0000:00:12.0: PCI INT A disabled [ 0.892116] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.892198] pci 0000:00:12.2: PCI INT B disabled [ 0.892203] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.972069] pci 0000:00:13.0: PCI INT A disabled [ 0.972096] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.972181] pci 0000:00:13.2: PCI INT B disabled [ 0.972214] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.052077] pci 0000:00:14.5: PCI INT C disabled [ 1.052102] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.132069] pci 0000:00:16.0: PCI INT A disabled [ 1.132095] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.132179] pci 0000:00:16.2: PCI INT B disabled [ 1.132216] pci 0000:01:00.0: Boot video device [ 1.132263] pci 0000:05:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50 [ 1.132331] pci 0000:05:00.0: PCI INT A disabled [ 1.132337] PCI: CLS 64 bytes, default 64 [ 1.132621] PCI-DMA: Disabling AGP. [ 1.134823] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 1.134824] PCI-DMA: using GART IOMMU. [ 1.134826] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.137958] IBS: LVT offset 1 assigned [ 1.137992] perf: AMD IBS detected (0x0000001f) [ 1.138121] audit: initializing netlink socket (disabled) [ 1.138130] type=2000 audit(1364673472.132:1): initialized [ 1.153033] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.154847] VFS: Disk quotas dquot_6.5.2 [ 1.154884] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.155250] fuse init (API version 7.17) [ 1.155310] msgmni has been set to 15939 [ 1.155720] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.155747] io scheduler noop registered [ 1.155749] io scheduler deadline registered [ 1.155772] io scheduler cfq registered (default) [ 1.155961] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.155975] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.156099] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.156104] ACPI: Power Button [PWRB] [ 1.156133] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.156135] ACPI: Power Button [PWRF] [ 1.156181] ACPI: acpi_idle registered with cpuidle [ 1.336394] ERST: Table is not found! [ 1.336395] GHES: HEST is not enabled! [ 1.336474] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.356818] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.382722] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.400407] Linux agpgart interface v0.103 [ 1.401464] brd: module loaded [ 1.401958] loop: module loaded [ 1.402074] ahci 0000:00:11.0: version 3.0 [ 1.402095] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.402222] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.402224] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.402706] scsi0 : ahci [ 1.402773] scsi1 : ahci [ 1.402830] scsi2 : ahci [ 1.402881] scsi3 : ahci [ 1.403028] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 1.403030] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 1.403032] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 1.403035] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 1.403264] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.403516] Fixed MDIO Bus: probed [ 1.403530] tun: Universal TUN/TAP device driver, 1.6 [ 1.403532] tun: (C) 1999-2004 Max Krasnyansky [ 1.403594] PPP generic driver version 2.4.2 [ 1.403662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.403681] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.403693] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.403729] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.403735] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.403753] QUIRK: Enable AMD PLL fix [ 1.403761] ehci_hcd 0000:00:12.2: debug port 1 [ 1.403775] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.412059] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.412348] hub 1-0:1.0: USB hub found [ 1.412351] hub 1-0:1.0: 5 ports detected [ 1.412424] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.412436] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.412480] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.412486] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.412501] ehci_hcd 0000:00:13.2: debug port 1 [ 1.412510] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 1.424058] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.424222] hub 2-0:1.0: USB hub found [ 1.424225] hub 2-0:1.0: 5 ports detected [ 1.424288] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.424300] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 1.424344] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.424349] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.424363] ehci_hcd 0000:00:16.2: debug port 1 [ 1.424372] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 1.436059] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.436223] hub 3-0:1.0: USB hub found [ 1.436225] hub 3-0:1.0: 4 ports detected [ 1.436289] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.436305] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.436317] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.436370] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.436389] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 1.496136] hub 4-0:1.0: USB hub found [ 1.496141] hub 4-0:1.0: 5 ports detected [ 1.496211] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.496223] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.496262] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.496274] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 1.556127] hub 5-0:1.0: USB hub found [ 1.556131] hub 5-0:1.0: 5 ports detected [ 1.556202] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.556213] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.556254] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.556266] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 1.616181] hub 6-0:1.0: USB hub found [ 1.616187] hub 6-0:1.0: 2 ports detected [ 1.616288] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.616300] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 1.616335] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.616347] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 1.676154] hub 7-0:1.0: USB hub found [ 1.676159] hub 7-0:1.0: 4 ports detected [ 1.676225] uhci_hcd: USB Universal Host Controller Interface driver [ 1.676265] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50 [ 1.676277] xhci_hcd 0000:05:00.0: setting latency timer to 64 [ 1.676279] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.676330] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8 [ 1.728077] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.783819] xhci_hcd 0000:05:00.0: irq 50, io mem 0xfe900000 [ 1.783855] xhci_hcd 0000:05:00.0: irq 72 for MSI/MSI-X [ 1.783859] xhci_hcd 0000:05:00.0: irq 73 for MSI/MSI-X [ 1.783863] xhci_hcd 0000:05:00.0: irq 74 for MSI/MSI-X [ 1.783867] xhci_hcd 0000:05:00.0: irq 75 for MSI/MSI-X [ 1.783870] xhci_hcd 0000:05:00.0: irq 76 for MSI/MSI-X [ 1.783875] xhci_hcd 0000:05:00.0: irq 77 for MSI/MSI-X [ 1.783879] xhci_hcd 0000:05:00.0: irq 78 for MSI/MSI-X [ 1.784034] xHCI xhci_add_endpoint called for root hub [ 1.784035] xHCI xhci_check_bandwidth called for root hub [ 1.784050] hub 8-0:1.0: USB hub found [ 1.784054] hub 8-0:1.0: 2 ports detected [ 1.784090] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.784117] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9 [ 1.787347] xHCI xhci_add_endpoint called for root hub [ 1.787349] xHCI xhci_check_bandwidth called for root hub [ 1.787363] hub 9-0:1.0: USB hub found [ 1.787367] hub 9-0:1.0: 2 ports detected [ 1.820194] usbcore: registered new interface driver libusual [ 1.820224] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.820539] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.820543] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.820718] mousedev: PS/2 mouse device common for all mice [ 1.820866] rtc_cmos 00:07: RTC can wake from S4 [ 1.820949] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.820976] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.821036] device-mapper: uevent: version 1.0.3 [ 1.821093] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.821181] cpuidle: using governor ladder [ 1.821336] cpuidle: using governor menu [ 1.821337] EFI Variables Facility v0.08 2004-May-17 [ 1.821511] TCP cubic registered [ 1.821579] NET: Registered protocol family 10 [ 1.821901] NET: Registered protocol family 17 [ 1.821904] Registering the dns_resolver key type [ 1.822036] PM: Hibernation image not present or could not be loaded. [ 1.822043] registered taskstats version 1 [ 1.828321] Magic number: 5:694:1002 [ 1.828352] i8042 aux 00:04: hash matches [ 1.828436] rtc_cmos 00:07: setting system clock to 2013-03-30 19:57:53 UTC (1364673473) [ 1.828481] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00) [ 1.828506] powernow-k8: Core Performance Boosting: on. [ 1.828549] powernow-k8: 0 : pstate 0 (3200 MHz) [ 1.828550] powernow-k8: 1 : pstate 1 (2400 MHz) [ 1.828552] powernow-k8: 2 : pstate 2 (1600 MHz) [ 1.828553] powernow-k8: 3 : pstate 3 (800 MHz) [ 1.829185] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.829187] EDD information not available. [ 1.864095] Initializing USB Mass Storage driver... [ 1.864225] scsi4 : usb-storage 1-1:1.0 [ 1.864267] usbcore: registered new interface driver usb-storage [ 1.864268] USB Mass Storage support registered. [ 1.892109] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.892150] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.892192] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.892232] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.894189] ata3.00: ATA-8: WDC WD10EURS-630AB1, 80.00A80, max UDMA/133 [ 1.894191] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.894754] ata4.00: ATA-8: WDC WD10EALX-559BA0, 15.01H15, max UDMA/133 [ 1.894763] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.896172] ata2.00: ATA-8: WDC WD15EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 1.896189] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.896427] ata3.00: configured for UDMA/133 [ 1.896532] ata4.00: configured for UDMA/133 [ 1.897461] ata1.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 1.897463] ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.900202] ata2.00: configured for UDMA/133 [ 1.902451] ata1.00: configured for UDMA/133 [ 1.902644] scsi 0:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 1.902876] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.902987] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 1.903133] scsi 1:0:0:0: Direct-Access ATA WDC WD15EARS-00M 51.0 PQ: 0 ANSI: 5 [ 1.903208] sd 0:0:0:0: [sda] Write Protect is off [ 1.903211] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.903255] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.903262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.903267] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.903374] sd 1:0:0:0: [sdb] Write Protect is off [ 1.903377] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.903393] scsi 2:0:0:0: Direct-Access ATA WDC WD10EURS-630 80.0 PQ: 0 ANSI: 5 [ 1.903424] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.903515] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.903518] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.903527] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.903648] sd 2:0:0:0: [sdc] Write Protect is off [ 1.903650] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.903662] scsi 3:0:0:0: Direct-Access ATA WDC WD10EALX-559 15.0 PQ: 0 ANSI: 5 [ 1.903683] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.903768] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.903770] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.903864] sd 3:0:0:0: [sdd] Write Protect is off [ 1.903866] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.903898] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.912174] sdd: unknown partition table [ 1.912504] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.919425] sdb: unknown partition table [ 1.919586] sda: sda1 sda2 < sda5 > [ 1.919793] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.919903] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.931556] sdc: unknown partition table [ 1.931983] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.933001] Freeing unused kernel memory: 920k freed [ 1.933183] Write protecting the kernel read-only data: 12288k [ 1.936922] Freeing unused kernel memory: 1600k freed [ 1.940027] Freeing unused kernel memory: 1192k freed [ 1.957055] udevd[117]: starting version 175 [ 1.972353] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.972382] r8169 0000:02:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46 [ 1.972421] r8169 0000:02:00.0: setting latency timer to 64 [ 1.972474] r8169 0000:02:00.0: irq 79 for MSI/MSI-X [ 1.972807] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc90011784000, 8c:89:a5:63:5c:80, XID 0c900800 IRQ 79 [ 1.972809] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.973224] sky2: driver version 1.30 [ 1.973473] sky2 0000:06:00.0: PCI INT A -> GSI 47 (level, low) -> IRQ 47 [ 1.973480] sky2 0000:06:00.0: setting latency timer to 64 [ 1.973502] sky2 0000:06:00.0: Yukon-2 EC chip revision 2 [ 1.973558] sky2 0000:06:00.0: irq 80 for MSI/MSI-X [ 1.973892] sky2 0000:06:00.0: eth1: addr 00:30:4f:85:60:b2 [ 1.973907] scsi5 : pata_atiixp [ 1.973981] scsi6 : pata_atiixp [ 1.974201] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.974203] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.976068] usb 1-2: new high-speed USB device number 3 using ehci_hcd [ 2.103637] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.139029] Refined TSC clocksource calibration: 3200.100 MHz. [ 2.139034] Switching to clocksource tsc [ 2.144542] ata5.00: ATA-8: WDC WD6400AAKS-22A7B0, 01.03B01, max UDMA/133 [ 2.144545] ata5.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.144551] ata5.01: ATAPI: HL-DT-ST DVDRAM GH24NS50, XP02, max UDMA/100 [ 2.144554] ata5.00: limited to UDMA/33 due to 40-wire cable [ 2.144556] ata5.01: limited to UDMA/33 due to 40-wire cable [ 2.152548] ata5.00: configured for UDMA/33 [ 2.168372] ata5.01: configured for UDMA/33 [ 2.173969] scsi 5:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5 [ 2.174177] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 2.174188] sd 5:0:0:0: [sde] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 2.178391] scsi 5:0:1:0: CD-ROM HL-DT-ST DVDRAM GH24NS50 XP02 PQ: 0 ANSI: 5 [ 2.178485] sd 5:0:0:0: [sde] Write Protect is off [ 2.178488] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.185446] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.188228] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.188237] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.188424] sr 5:0:1:0: Attached scsi CD-ROM sr0 [ 2.188491] sr 5:0:1:0: Attached scsi generic sg5 type 5 [ 2.198450] sde: sde1 sde2 [ 2.198938] sd 5:0:0:0: [sde] Attached SCSI disk [ 2.224070] usb 1-3: new high-speed USB device number 4 using ehci_hcd [ 2.696049] usb 2-3: new high-speed USB device number 3 using ehci_hcd [ 2.864741] scsi 4:0:0:0: Direct-Access WD 5000AAV External 1.65 PQ: 0 ANSI: 4 [ 2.865169] sd 4:0:0:0: Attached scsi generic sg6 type 0 [ 2.866522] sd 4:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.867372] sd 4:0:0:0: [sdf] Write Protect is off [ 2.867375] sd 4:0:0:0: [sdf] Mode Sense: 21 00 00 00 [ 2.868150] sd 4:0:0:0: [sdf] No Caching mode page present [ 2.868158] sd 4:0:0:0: [sdf] Assuming drive cache: write through [ 2.870743] sd 4:0:0:0: [sdf] No Caching mode page present [ 2.870745] sd 4:0:0:0: [sdf] Assuming drive cache: write through [ 2.871305] sdf: sdf1 [ 2.874117] sd 4:0:0:0: [sdf] No Caching mode page present [ 2.874119] sd 4:0:0:0: [sdf] Assuming drive cache: write through [ 2.874121] sd 4:0:0:0: [sdf] Attached SCSI disk [ 2.940067] usb 2-5: new high-speed USB device number 4 using ehci_hcd [ 3.184069] usb 3-1: new high-speed USB device number 2 using ehci_hcd [ 3.321247] scsi7 : usb-storage 3-1:1.0 [ 3.432110] usb 3-3: new high-speed USB device number 3 using ehci_hcd [ 3.582872] scsi8 : usb-storage 3-3:1.0 [ 3.582997] scsi9 : usb-storage 3-3:1.1 [ 3.692092] usb 3-4: new high-speed USB device number 4 using ehci_hcd [ 3.826214] hub 3-4:1.0: USB hub found [ 3.826613] hub 3-4:1.0: 4 ports detected [ 4.092071] usb 5-1: new full-speed USB device number 2 using ohci_hcd [ 4.321408] scsi 7:0:0:0: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 4.322178] scsi 7:0:0:1: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 4.322925] scsi 7:0:0:2: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 4.323675] scsi 7:0:0:3: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 4.324115] sd 7:0:0:0: Attached scsi generic sg7 type 0 [ 4.324242] sd 7:0:0:1: Attached scsi generic sg8 type 0 [ 4.324342] sd 7:0:0:2: Attached scsi generic sg9 type 0 [ 4.324453] sd 7:0:0:3: Attached scsi generic sg10 type 0 [ 4.329282] sd 7:0:0:0: [sdg] Attached SCSI removable disk [ 4.331281] sd 7:0:0:1: [sdh] Attached SCSI removable disk [ 4.331906] sd 7:0:0:2: [sdi] Attached SCSI removable disk [ 4.332516] sd 7:0:0:3: [sdj] Attached SCSI removable disk [ 4.364303] usb 9-2: new SuperSpeed USB device number 2 using xhci_hcd [ 4.387343] scsi10 : usb-storage 9-2:1.0 [ 4.648103] usb 4-4: new low-speed USB device number 2 using ohci_hcd [ 4.804568] Adding 8373244k swap on /dev/sda5. Priority:-1 extents:1 across:8373244k [ 4.882266] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.882270] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.080095] usb 4-5: new low-speed USB device number 3 using ohci_hcd [ 5.141711] udevd[490]: starting version 175 [ 5.249163] usb 3-3: USB disconnect, device number 3 [ 5.320511] usb 3-4.1: new full-speed USB device number 5 using ehci_hcd [ 5.384989] scsi 10:0:0:0: Direct-Access TOSHIBA STOR.E PARTNER AX00 PQ: 0 ANSI: 5 [ 5.385465] sd 10:0:0:0: Attached scsi generic sg11 type 0 [ 5.385633] sd 10:0:0:0: [sdk] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 5.386408] sd 10:0:0:0: [sdk] Write Protect is off [ 5.386411] sd 10:0:0:0: [sdk] Mode Sense: 23 00 00 00 [ 5.387166] sd 10:0:0:0: [sdk] No Caching mode page present [ 5.387168] sd 10:0:0:0: [sdk] Assuming drive cache: write through [ 5.389004] sd 10:0:0:0: [sdk] No Caching mode page present [ 5.389006] sd 10:0:0:0: [sdk] Assuming drive cache: write through [ 5.390389] sdk: sdk1 [ 5.392360] sd 10:0:0:0: [sdk] No Caching mode page present [ 5.392363] sd 10:0:0:0: [sdk] Assuming drive cache: write through [ 5.392365] sd 10:0:0:0: [sdk] Attached SCSI disk [ 5.492611] usb 3-4.2: new full-speed USB device number 6 using ehci_hcd [ 5.664615] usb 3-4.3: new full-speed USB device number 7 using ehci_hcd [ 5.703724] lp: driver loaded but no devices found [ 5.823942] wmi: Mapper loaded [ 5.837113] usb 3-4.4: new high-speed USB device number 8 using ehci_hcd [ 5.934832] hub 3-4.4:1.0: USB hub found [ 5.935172] hub 3-4.4:1.0: 4 ports detected [ 6.111665] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 6.208925] usb 3-4.4.1: new full-speed USB device number 9 using ehci_hcd [ 6.229461] MCE: In-kernel MCE decoding enabled. [ 6.235151] EDAC MC: Ver: 2.1.0 [ 6.240387] AMD64 EDAC driver v3.4.0 [ 6.240423] EDAC amd64: DRAM ECC disabled. [ 6.240431] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 6.240432] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 6.240433] (Note that use of the override may cause unknown side effects.) [ 6.276130] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.380743] usb 3-4.4.2: new full-speed USB device number 10 using ehci_hcd [ 6.383993] IR NEC protocol handler initialized [ 6.390551] IR RC5(x) protocol handler initialized [ 6.468997] IR RC6 protocol handler initialized [ 6.475686] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 6.475747] SP5100 TCO timer: mmio address 0xbafe00 already in use [ 6.499862] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 6.500666] Linux video capture interface: v2.00 [ 6.516580] Mantis 0000:07:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.517589] DVB: registering new adapter (Mantis DVB adapter) [ 6.552591] usb 3-4.4.3: new full-speed USB device number 11 using ehci_hcd [ 6.725118] usb 3-4.4.4: new high-speed USB device number 12 using ehci_hcd [ 6.735855] IR JVC protocol handler initialized [ 6.771327] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2 [ 6.771505] generic-usb 0003:046D:C05B.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-5/input0 [ 6.771528] usbcore: registered new interface driver usbhid [ 6.771530] usbhid: USB HID core driver [ 6.772137] IR Sony protocol handler initialized [ 6.786565] IR MCE Keyboard/mouse protocol handler initialized [ 6.804437] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input3 [ 6.804523] logitech 0003:046D:C517.0001: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-4/input0 [ 6.808562] lirc_dev: IR Remote Control driver registered, major 250 [ 6.812170] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 6.812714] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/input/input4 [ 6.812865] logitech 0003:046D:C517.0002: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-4/input1 [ 6.816198] IR LIRC bridge handler initialized [ 6.821455] hub 3-4.4.4:1.0: USB hub found [ 6.821544] hub 3-4.4.4:1.0: 7 ports detected [ 6.882682] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 6.882684] Disabling lock debugging due to kernel taint [ 6.917067] [fglrx] Maximum main memory to use for locked dma buffers: 7740 MBytes. [ 6.917284] [fglrx] vendor: 1002 device: 6798 count: 1 [ 6.917640] [fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 6.917658] pci 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 6.917662] pci 0000:01:00.0: setting latency timer to 64 [ 6.917835] [fglrx] Kernel PAT support is enabled [ 6.917847] [fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 1 minors [ 6.995144] dib0700: loaded with support for 21 different device-types [ 6.995302] dvb-usb: found a 'TechniSat AirStar TeleStick 2' in cold state, will try to load a firmware [ 7.092772] usb 3-4.4.4.1: new full-speed USB device number 13 using ehci_hcd [ 7.131368] solo6x10 0000:04:05.0: Probing Softlogic 6110 [ 7.131386] solo6x10 0000:04:05.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48 [ 7.162214] usbcore: registered new interface driver usbserial [ 7.162231] USB Serial support registered for generic [ 7.264776] usb 3-4.4.4.2: new full-speed USB device number 14 using ehci_hcd [ 7.281105] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.421091] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3252 [ 7.421116] usbcore: registered new interface driver usblp [ 7.436378] usb 3-4.4.4.3: new full-speed USB device number 15 using ehci_hcd [ 7.460190] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 7.461876] stb0899_attach: Attaching STB0899 [ 7.461977] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 7.462050] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 7.462113] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 7.462176] input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 7.462226] input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 7.462272] input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 7.462321] input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 7.462542] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25 [ 7.462620] snd_hda_intel 0000:01:00.1: irq 81 for MSI/MSI-X [ 7.462638] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 7.555562] stb6100_attach: Attaching STB6100 [ 7.600688] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 7.608096] usb 3-4.4.4.5: new full-speed USB device number 16 using ehci_hcd [ 7.639600] LNBx2x attached on addr=8 [ 7.639603] DVB: registering adapter 2 frontend 0 (STB0899 Multistandard)... [ 7.780459] usb 3-4.4.4.6: new full-speed USB device number 17 using ehci_hcd [ 7.793016] type=1400 audit(1364673479.460:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=906 comm="apparmor_parser" [ 7.793029] type=1400 audit(1364673479.460:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=907 comm="apparmor_parser" [ 7.793041] type=1400 audit(1364673479.460:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=905 comm="apparmor_parser" [ 7.793392] type=1400 audit(1364673479.460:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=907 comm="apparmor_parser" [ 7.793398] type=1400 audit(1364673479.460:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=906 comm="apparmor_parser" [ 7.793404] type=1400 audit(1364673479.460:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=905 comm="apparmor_parser" [ 7.793600] type=1400 audit(1364673479.460:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=907 comm="apparmor_parser" [ 7.793614] type=1400 audit(1364673479.460:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=905 comm="apparmor_parser" [ 7.793623] type=1400 audit(1364673479.460:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=906 comm="apparmor_parser" [ 7.806184] dib0700: firmware started successfully. [ 7.952955] usb 3-4.4.4.7: new full-speed USB device number 18 using ehci_hcd [ 8.014392] Too many HDMI devices [ 8.014394] Too many HDMI devices [ 8.014396] Too many HDMI devices [ 8.014397] Too many HDMI devices [ 8.014398] Too many HDMI devices [ 8.014398] Too many HDMI devices [ 8.014399] Too many HDMI devices [ 8.014400] Too many HDMI devices [ 8.014493] hda-codec: out of range cmd 0:0:f90:707:40 [ 8.014494] hda-codec: out of range cmd 0:0:f90:708:85 [ 8.014735] hda-codec: out of range cmd 0:0:f90:f00:c [ 8.014736] hda-codec: out of range cmd 0:0:f90:709:0 [ 8.014737] hda-codec: out of range cmd 0:0:f90:f09:0 [ 8.014810] hda-codec: out of range cmd 0:0:e0:f0d:0 [ 8.014812] HDMI status: Codec=0 Pin=2 Presence_Detect=0 ELD_Valid=0 [ 8.014828] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 8.014845] HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0 [ 8.014863] HDMI status: Codec=0 Pin=9 Presence_Detect=0 ELD_Valid=0 [ 8.014884] HDMI status: Codec=0 Pin=3984 Presence_Detect=1 ELD_Valid=1 [ 8.014885] hda-codec: out of range cmd 0:0:f90:f2e:8 [ 8.014887] hda_codec: cannot build controls for #0 (error -16) [ 8.014888] hda_codec: cannot revert codec [ 8.015242] snd_hda_intel 0000:01:00.1: PCI INT B disabled [ 8.015260] snd_hda_intel: probe of 0000:01:00.1 failed with error -16 [ 8.308287] dvb-usb: found a 'TechniSat AirStar TeleStick 2' in warm state. [ 8.308387] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 8.308503] DVB: registering new adapter (TechniSat AirStar TeleStick 2) [ 8.499707] EXT4-fs (sdb): warning: maximal mount count reached, running e2fsck is recommended [ 8.504537] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null) [ 8.524096] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... [ 8.549511] EXT4-fs (sdc): warning: maximal mount count reached, running e2fsck is recommended [ 8.554019] EXT4-fs (sdc): mounted filesystem with ordered data mode. Opts: (null) [ 8.739726] DiB0070: successfully identified [ 8.753505] EXT4-fs (sdd): warning: maximal mount count reached, running e2fsck is recommended [ 8.755007] EXT4-fs (sdd): mounted filesystem with ordered data mode. Opts: (null) [ 8.780118] Registered IR keymap rc-dib0700-rc5 [ 8.780372] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/rc/rc0/input13 [ 8.780425] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/rc/rc0 [ 8.780701] dvb-usb: schedule remote query interval to 50 msecs. [ 8.780711] dvb-usb: TechniSat AirStar TeleStick 2 successfully initialized and connected. [ 8.780926] dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware [ 8.782375] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 8.861219] EXT4-fs (sde2): warning: maximal mount count reached, running e2fsck is recommended [ 8.861751] EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null) [ 8.903045] EXT4-fs (sde1): warning: maximal mount count reached, running e2fsck is recommended [ 8.903753] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null) [ 8.984266] dib0700: firmware started successfully. [ 9.034984] EXT4-fs (sdk1): mounted filesystem with ordered data mode. Opts: (null) [ 9.187295] RPC: Registered named UNIX socket transport module. [ 9.187297] RPC: Registered udp transport module. [ 9.187298] RPC: Registered tcp transport module. [ 9.187300] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.235911] FS-Cache: Loaded [ 9.420736] init: failsafe main process (1332) killed by TERM signal [ 9.478725] FS-Cache: Netfs 'nfs' registered for caching [ 9.488237] dvb-usb: found a 'Pinnacle PCTV 72e' in warm state. [ 9.488360] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 9.488463] DVB: registering new adapter (Pinnacle PCTV 72e) [ 9.512456] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 9.706590] DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)... [ 9.716096] usb 3-3: new high-speed USB device number 19 using ehci_hcd [ 9.865235] scsi11 : usb-storage 3-3:1.3 [ 9.865371] scsi12 : usb-storage 3-3:1.4 [ 9.923554] DiB0070: successfully identified [ 9.923574] Registered IR keymap rc-dib0700-rc5 [ 9.923762] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-3/rc/rc1/input14 [ 9.923870] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-3/rc/rc1 [ 9.924024] dvb-usb: schedule remote query interval to 50 msecs. [ 9.924027] dvb-usb: Pinnacle PCTV 72e successfully initialized and connected. [ 9.924221] usbcore: registered new interface driver dvb_usb_dib0700 [ 9.924311] usbcore: registered new interface driver usbserial_generic [ 9.924313] usbserial: USB Serial Driver core [ 9.924830] USB Serial support registered for FTDI USB Serial Device [ 9.924938] ftdi_sio 3-4.1:1.0: FTDI USB Serial Device converter detected [ 9.924980] usb 3-4.1: Detected FT232RL [ 9.924982] usb 3-4.1: Number of endpoints 2 [ 9.924984] usb 3-4.1: Endpoint 1 MaxPacketSize 64 [ 9.924985] usb 3-4.1: Endpoint 2 MaxPacketSize 64 [ 9.924986] usb 3-4.1: Setting MaxPacketSize 64 [ 9.925333] usb 3-4.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 9.925346] ftdi_sio 3-4.2:1.0: FTDI USB Serial Device converter detected [ 9.925366] usb 3-4.2: Detected FT232RL [ 9.925367] usb 3-4.2: Number of endpoints 2 [ 9.925369] usb 3-4.2: Endpoint 1 MaxPacketSize 64 [ 9.925370] usb 3-4.2: Endpoint 2 MaxPacketSize 64 [ 9.925371] usb 3-4.2: Setting MaxPacketSize 64 [ 9.925701] usb 3-4.2: FTDI USB Serial Device converter now attached to ttyUSB1 [ 9.925710] ftdi_sio 3-4.3:1.0: FTDI USB Serial Device converter detected [ 9.925726] usb 3-4.3: Detected FT232RL [ 9.925727] usb 3-4.3: Number of endpoints 2 [ 9.925728] usb 3-4.3: Endpoint 1 MaxPacketSize 64 [ 9.925730] usb 3-4.3: Endpoint 2 MaxPacketSize 64 [ 9.925731] usb 3-4.3: Setting MaxPacketSize 64 [ 9.926044] usb 3-4.3: FTDI USB Serial Device converter now attached to ttyUSB2 [ 9.926058] ftdi_sio 3-4.4.1:1.0: FTDI USB Serial Device converter detected [ 9.926079] usb 3-4.4.1: Detected FT232RL [ 9.926080] usb 3-4.4.1: Number of endpoints 2 [ 9.926082] usb 3-4.4.1: Endpoint 1 MaxPacketSize 64 [ 9.926083] usb 3-4.4.1: Endpoint 2 MaxPacketSize 64 [ 9.926084] usb 3-4.4.1: Setting MaxPacketSize 64 [ 9.926455] usb 3-4.4.1: FTDI USB Serial Device converter now attached to ttyUSB3 [ 9.926466] ftdi_sio 3-4.4.2:1.0: FTDI USB Serial Device converter detected [ 9.926487] usb 3-4.4.2: Detected FT232RL [ 9.926488] usb 3-4.4.2: Number of endpoints 2 [ 9.926489] usb 3-4.4.2: Endpoint 1 MaxPacketSize 64 [ 9.926491] usb 3-4.4.2: Endpoint 2 MaxPacketSize 64 [ 9.926492] usb 3-4.4.2: Setting MaxPacketSize 64 [ 9.926815] usb 3-4.4.2: FTDI USB Serial Device converter now attached to ttyUSB4 [ 9.926822] ftdi_sio 3-4.4.3:1.0: FTDI USB Serial Device converter detected [ 9.926837] usb 3-4.4.3: Detected FT232RL [ 9.926839] usb 3-4.4.3: Number of endpoints 2 [ 9.926840] usb 3-4.4.3: Endpoint 1 MaxPacketSize 64 [ 9.926841] usb 3-4.4.3: Endpoint 2 MaxPacketSize 64 [ 9.926843] usb 3-4.4.3: Setting MaxPacketSize 64 [ 9.927157] usb 3-4.4.3: FTDI USB Serial Device converter now attached to ttyUSB5 [ 9.927169] ftdi_sio 3-4.4.4.1:1.0: FTDI USB Serial Device converter detected [ 9.927185] usb 3-4.4.4.1: Detected FT232RL [ 9.927187] usb 3-4.4.4.1: Number of endpoints 2 [ 9.927188] usb 3-4.4.4.1: Endpoint 1 MaxPacketSize 64 [ 9.927189] usb 3-4.4.4.1: Endpoint 2 MaxPacketSize 64 [ 9.927190] usb 3-4.4.4.1: Setting MaxPacketSize 64 [ 9.927718] usb 3-4.4.4.1: FTDI USB Serial Device converter now attached to ttyUSB6 [ 9.927728] ftdi_sio 3-4.4.4.2:1.0: FTDI USB Serial Device converter detected [ 9.927745] usb 3-4.4.4.2: Detected FT232RL [ 9.927746] usb 3-4.4.4.2: Number of endpoints 2 [ 9.927747] usb 3-4.4.4.2: Endpoint 1 MaxPacketSize 64 [ 9.927749] usb 3-4.4.4.2: Endpoint 2 MaxPacketSize 64 [ 9.927750] usb 3-4.4.4.2: Setting MaxPacketSize 64 [ 9.928127] usb 3-4.4.4.2: FTDI USB Serial Device converter now attached to ttyUSB7 [ 9.928135] ftdi_sio 3-4.4.4.3:1.0: FTDI USB Serial Device converter detected [ 9.928151] usb 3-4.4.4.3: Detected FT232RL [ 9.928152] usb 3-4.4.4.3: Number of endpoints 2 [ 9.928153] usb 3-4.4.4.3: Endpoint 1 MaxPacketSize 64 [ 9.928155] usb 3-4.4.4.3: Endpoint 2 MaxPacketSize 64 [ 9.928156] usb 3-4.4.4.3: Setting MaxPacketSize 64 [ 9.928698] usb 3-4.4.4.3: FTDI USB Serial Device converter now attached to ttyUSB8 [ 9.928709] ftdi_sio 3-4.4.4.5:1.0: FTDI USB Serial Device converter detected [ 9.928727] usb 3-4.4.4.5: Detected FT232RL [ 9.928728] usb 3-4.4.4.5: Number of endpoints 2 [ 9.928730] usb 3-4.4.4.5: Endpoint 1 MaxPacketSize 64 [ 9.928731] usb 3-4.4.4.5: Endpoint 2 MaxPacketSize 64 [ 9.928732] usb 3-4.4.4.5: Setting MaxPacketSize 64 [ 9.929057] usb 3-4.4.4.5: FTDI USB Serial Device converter now attached to ttyUSB9 [ 9.929065] ftdi_sio 3-4.4.4.6:1.0: FTDI USB Serial Device converter detected [ 9.929079] usb 3-4.4.4.6: Detected FT232RL [ 9.929080] usb 3-4.4.4.6: Number of endpoints 2 [ 9.929081] usb 3-4.4.4.6: Endpoint 1 MaxPacketSize 64 [ 9.929082] usb 3-4.4.4.6: Endpoint 2 MaxPacketSize 64 [ 9.929083] usb 3-4.4.4.6: Setting MaxPacketSize 64 [ 9.929606] usb 3-4.4.4.6: FTDI USB Serial Device converter now attached to ttyUSB10 [ 9.929616] ftdi_sio 3-4.4.4.7:1.0: FTDI USB Serial Device converter detected [ 9.929633] usb 3-4.4.4.7: Detected FT232RL [ 9.929634] usb 3-4.4.4.7: Number of endpoints 2 [ 9.929635] usb 3-4.4.4.7: Endpoint 1 MaxPacketSize 64 [ 9.929636] usb 3-4.4.4.7: Endpoint 2 MaxPacketSize 64 [ 9.929637] usb 3-4.4.4.7: Setting MaxPacketSize 64 [ 9.930207] usb 3-4.4.4.7: FTDI USB Serial Device converter now attached to ttyUSB11 [ 9.930253] usbcore: registered new interface driver ftdi_sio [ 9.930255] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver [ 9.982750] USB Serial support registered for pl2303 [ 9.982779] pl2303 5-1:1.0: pl2303 converter detected [ 10.003319] usb 5-1: pl2303 converter now attached to ttyUSB12 [ 10.003351] usbcore: registered new interface driver pl2303 [ 10.003353] pl2303: Prolific PL2303 USB to serial adaptor driver [ 10.440540] USB Serial support registered for GSM modem (1-port) [ 10.440729] option 3-3:1.0: GSM modem (1-port) converter detected [ 10.440831] usb 3-3: GSM modem (1-port) converter now attached to ttyUSB13 [ 10.440839] option 3-3:1.1: GSM modem (1-port) converter detected [ 10.440887] usb 3-3: GSM modem (1-port) converter now attached to ttyUSB14 [ 10.440894] option 3-3:1.2: GSM modem (1-port) converter detected [ 10.440947] usb 3-3: GSM modem (1-port) converter now attached to ttyUSB15 [ 10.440969] usbcore: registered new interface driver option [ 10.440970] option: v0.7.2:USB Driver for GSM modems [ 10.676935] solo6x10 0000:04:05.0: Display as /dev/video0 with 16 inputs (5 extended) [ 10.737144] solo6x10 0000:04:05.0: Encoders as /dev/video1-16 [ 10.737343] solo6x10 0000:04:05.0: Alsa sound card as Softlogic0 [ 10.891398] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 10.893555] scsi 12:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2 [ 10.902842] sr1: scsi-1 drive [ 10.903025] sr 11:0:0:0: Attached scsi CD-ROM sr1 [ 10.903144] sr 11:0:0:0: Attached scsi generic sg12 type 5 [ 10.903620] sd 12:0:0:0: Attached scsi generic sg13 type 0 [ 10.915447] sd 12:0:0:0: [sdl] Attached SCSI removable disk [ 11.291607] type=1400 audit(1364673482.956:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1519 comm="apparmor_parser" [ 11.519100] ppdev: user-space parallel port driver [ 11.771925] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 11.771928] vesafb: scrolling: redraw [ 11.771931] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 11.780113] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90012200000, using 8128k, total 8128k [ 11.780319] Console: switching to colour frame buffer device 240x67 [ 11.780346] fb0: VESA VGA frame buffer device [ 12.360145] Bluetooth: Core ver 2.16 [ 12.360164] NET: Registered protocol family 31 [ 12.360166] Bluetooth: HCI device and connection manager initialized [ 12.360168] Bluetooth: HCI socket layer initialized [ 12.360169] Bluetooth: L2CAP socket layer initialized [ 12.360173] Bluetooth: SCO socket layer initialized [ 12.544590] Bluetooth: RFCOMM TTY layer initialized [ 12.544594] Bluetooth: RFCOMM socket layer initialized [ 12.544595] Bluetooth: RFCOMM ver 1.11 [ 12.583020] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.583022] Bluetooth: BNEP filters: protocol multicast [ 14.177155] r8169 0000:02:00.0: eth0: link down [ 14.177161] r8169 0000:02:00.0: eth0: link down [ 14.177819] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.178205] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.186823] sky2 0000:06:00.0: eth1: enabling interface [ 14.187447] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 14.187769] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 14.935219] audit_printk_skb: 63 callbacks suppressed [ 14.935221] type=1400 audit(1364673486.600:33): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1688 comm="apparmor_parser" [ 15.300208] kvm: Nested Virtualization enabled [ 15.300213] kvm: Nested Paging enabled [ 15.383998] init: Failed to spawn vsftpd main process: unable to execute: No such file or directory [ 15.732961] r8169 0000:02:00.0: eth0: link up [ 15.733627] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.852675] sky2 0000:06:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control both [ 15.853345] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.963922] Bridge firewalling registered [ 18.647768] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.820800] fglrx_pci 0000:01:00.0: irq 81 for MSI/MSI-X [ 18.821260] [fglrx] Firegl kernel thread PID: 1832 [ 18.821312] [fglrx] Firegl kernel thread PID: 1833 [ 18.821361] [fglrx] Firegl kernel thread PID: 1834 [ 18.821431] [fglrx] IRQ 81 Enabled [ 18.828353] [fglrx] Gart USWC size:1280 M. [ 18.828355] [fglrx] Gart cacheable size:508 M. [ 18.828358] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 18.828360] [fglrx] Reserved FB block: Unshared offset:f8fc000, size:404000 [ 18.828362] [fglrx] Reserved FB block: Unshared offset:fff8000, size:8000 [ 18.828363] [fglrx] Reserved FB block: Unshared offset:bfff4000, size:c000 [ 19.732398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 19.833697] ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 20.232973] init: Failed to spawn vsftpd main process: unable to execute: No such file or directory [ 20.361103] init: Failed to spawn vsftpd main process: unable to execute: No such file or directory [ 20.500190] Ebtables v2.0 registered [ 20.643021] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 26.688071] eth0: no IPv6 routers present [ 26.896071] eth1: no IPv6 routers present [ 31.360841] /dev/vmmon[2996]: Module vmmon: registered with major=10 minor=165 [ 31.360847] /dev/vmmon[2996]: Module vmmon: initialized [ 31.386407] [3003]: VMCI: shared components initialized. [ 31.386468] [3003]: VMCI: host components initialized. [ 31.386593] [3003]: VMCI: Module registered (name=vmci,major=10,minor=57). [ 31.386599] [3003]: VMCI: Using host personality [ 31.386600] [3003]: VMCI: Module (name=vmci) is initialized [ 32.002893] netlink: 12 bytes leftover after parsing attributes. [ 32.002898] netlink: 12 bytes leftover after parsing attributes. [ 32.002957] netlink: 12 bytes leftover after parsing attributes. [ 32.002992] /dev/vmnet: open called by PID 3078 (vmnet-bridge) [ 32.003002] /dev/vmnet: hub 0 does not exist, allocating memory. [ 32.003015] /dev/vmnet: port on hub 0 successfully opened [ 32.003026] bridge-eth0: up [ 32.003029] bridge-eth0: attached [ 32.003044] netlink: 12 bytes leftover after parsing attributes. [ 33.039049] /dev/vmnet: open called by PID 3144 (vmnet-netifup) [ 33.039056] /dev/vmnet: hub 1 does not exist, allocating memory. [ 33.039086] /dev/vmnet: port on hub 1 successfully opened [ 33.192331] /dev/vmnet: open called by PID 3186 (vmnet-dhcpd) [ 33.192360] /dev/vmnet: port on hub 1 successfully opened [ 33.376302] /dev/vmnet: open called by PID 3245 (vmnet-natd) [ 33.376310] /dev/vmnet: hub 8 does not exist, allocating memory. [ 33.376323] /dev/vmnet: port on hub 8 successfully opened [ 33.488696] netlink: 12 bytes leftover after parsing attributes. [ 33.488699] netlink: 12 bytes leftover after parsing attributes. [ 33.488752] netlink: 12 bytes leftover after parsing attributes. [ 33.488825] netlink: 12 bytes leftover after parsing attributes. [ 33.489368] userif-3: sent link down event. [ 33.489370] userif-3: sent link up event. [ 33.490564] /dev/vmnet: open called by PID 3246 (vmnet-netifup) [ 33.490571] /dev/vmnet: port on hub 8 successfully opened [ 33.583386] /dev/vmnet: open called by PID 3258 (vmnet-dhcpd) [ 33.583397] /dev/vmnet: port on hub 8 successfully opened [ 34.076784] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 34.083057] NFSD: starting 90-second grace period [ 34.360344] technisat-usb2: set alternate setting [ 34.860072] dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in cold state, will try to load a firmware [ 34.878665] dvb-usb: downloading firmware from file 'dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw' [ 34.945096] usbcore: registered new interface driver dvb_usb_technisat_usb2 [ 34.956894] usb 2-5: USB disconnect, device number 4 [ 34.957049] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. [ 36.720133] usb 2-5: new high-speed USB device number 5 using ehci_hcd [ 36.853464] technisat-usb2: set alternate setting [ 36.853550] technisat-usb2: firmware version: 17.63 [ 36.853552] dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in warm state. [ 36.853853] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 36.854068] DVB: registering new adapter (Technisat SkyStar USB HD (DVB-S/S2)) [ 36.855574] dvb-usb: MAC address: 00:08:c9:f0:7f:ba [ 36.983979] stv6110x_attach: Attaching STV6110x [ 36.986666] technisat-usb2: i2c-error: 60 = 7 [ 37.058774] DVB: registering adapter 3 frontend 0 (Technisat SkyStar USB HD (DVB-S/S2))... [ 37.092105] Registered IR keymap rc-technisat-usb2 [ 37.092274] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-5/rc/rc2/input15 [ 37.092322] rc2: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-5/rc/rc2 [ 37.092400] input: MCE IR Keyboard/Mouse (technisat-usb2) as /devices/virtual/input/input16 [ 37.092482] rc rc2: lirc_dev: driver ir-lirc-codec (technisat-usb2) registered at minor = 0 [ 37.092484] dvb-usb: schedule remote query interval to 100 msecs. [ 37.092775] dvb-usb: Technisat SkyStar USB HD (DVB-S/S2) successfully initialized and connected. [ 43.128081] vmnet1: no IPv6 routers present [ 44.032078] vmnet8: no IPv6 routers present [ 76.075622] init: plymouth-stop pre-start process (4239) terminated with status 1 [ 3662.590480] EXT4-fs (sdf1): warning: maximal mount count reached, running e2fsck is recommended [ 3662.598903] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null) [ 9929.606329] vlc:10789 map pfn RAM range req uncached-minus for be200000-be2c6000, got write-back [ 9929.606897] vlc:10789 map pfn RAM range req uncached-minus for be300000-be3c6000, got write-back [ 9929.607495] vlc:10789 map pfn RAM range req uncached-minus for bdc00000-bdcc6000, got write-back [ 9929.608071] vlc:10789 map pfn RAM range req uncached-minus for bdd00000-bddc6000, got write-back [122412.332030] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445379400207454785 new 18445379400209195186 attempts 1 [208327.232030] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445379400209195186 new 18445379400210429791 attempts 1 [254980.314446] /dev/vmmon[2264]: PTSC: initialized at 3200100000 Hz using TSC, TSCs are synchronized. [254980.498253] /dev/vmmon[2264]: Monitor IPI vector: 0 [255001.981408] /dev/vmnet: open called by PID 2276 (vmx-vcpu-0) [255001.981430] device eth0 entered promiscuous mode [255001.981436] bridge-eth0: enabled promiscuous mode [255001.981439] /dev/vmnet: port on hub 0 successfully opened [255130.402800] NET: Registered protocol family 39 [295419.041702] /dev/vmmon[2264]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445379400210429791 new 18445379400211675667 attempts 1 [320248.234649] device eth0 left promiscuous mode [320248.234658] bridge-eth0: disabled promiscuous mode [320248.856123] NET: Unregistered protocol family 39 [381483.316044] /dev/vmmon[13454]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445379400211675667 new 18445379400212877569 attempts 1 [468421.056018] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445379400212877569 new 18445379400214063833 attempts 1 [487144.460054] usb 3-2: new high-speed USB device number 20 using ehci_hcd [487144.600794] scsi13 : usb-storage 3-2:1.0 [487145.601947] scsi 13:0:0:0: Direct-Access JetFlash Transcend 16GB 8.07 PQ: 0 ANSI: 2 [487145.602587] sd 13:0:0:0: Attached scsi generic sg14 type 0 [487145.603805] sd 13:0:0:0: [sdm] 31444992 512-byte logical blocks: (16.0 GB/14.9 GiB) [487145.604364] sd 13:0:0:0: [sdm] Write Protect is off [487145.604368] sd 13:0:0:0: [sdm] Mode Sense: 03 00 00 00 [487145.604917] sd 13:0:0:0: [sdm] No Caching mode page present [487145.604921] sd 13:0:0:0: [sdm] Assuming drive cache: write through [487145.607791] sd 13:0:0:0: [sdm] No Caching mode page present [487145.607795] sd 13:0:0:0: [sdm] Assuming drive cache: write through [487145.609192] sdm: sdm1 sdm2 [487145.611555] sd 13:0:0:0: [sdm] No Caching mode page present [487145.611558] sd 13:0:0:0: [sdm] Assuming drive cache: write through [487145.611561] sd 13:0:0:0: [sdm] Attached SCSI removable disk [487146.403308] EXT4-fs (sdm1): mounted filesystem with ordered data mode. Opts: (null) [487146.495846] EXT4-fs (sdm2): mounted filesystem with ordered data mode. Opts: (null) [487187.709406] sdm: detected capacity change from 16099835904 to 0 [487192.847675] usb 3-2: USB disconnect, device number 20 [487196.556089] usb 3-2: new high-speed USB device number 21 using ehci_hcd [487196.712446] scsi14 : usb-storage 3-2:1.0 [487198.100959] scsi 14:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 0 CCS [487198.104959] sd 14:0:0:0: Attached scsi generic sg14 type 0 [487198.107464] sd 14:0:0:0: [sdm] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB) [487198.108193] sd 14:0:0:0: [sdm] Write Protect is off [487198.108203] sd 14:0:0:0: [sdm] Mode Sense: 43 00 00 00 [487198.108941] sd 14:0:0:0: [sdm] No Caching mode page present [487198.108951] sd 14:0:0:0: [sdm] Assuming drive cache: write through [487198.114452] sd 14:0:0:0: [sdm] No Caching mode page present [487198.114462] sd 14:0:0:0: [sdm] Assuming drive cache: write through [487198.115861] sdm: sdm1 [487198.119488] sd 14:0:0:0: [sdm] No Caching mode page present [487198.119492] sd 14:0:0:0: [sdm] Assuming drive cache: write through [487198.119495] sd 14:0:0:0: [sdm] Attached SCSI removable disk [487526.015065] WARNING! power/level is deprecated; use power/control instead [487526.096155] usb 3-2: USB disconnect, device number 21 [518875.575501] /dev/vmmon[29774]: PTSC: initialized at 3200100000 Hz using TSC, TSCs are synchronized. [518904.690752] /dev/vmnet: open called by PID 29787 (vmx-vcpu-0) [518904.690768] device eth0 entered promiscuous mode [518904.690773] bridge-eth0: enabled promiscuous mode [518904.690777] /dev/vmnet: port on hub 0 successfully opened [519041.443184] NET: Registered protocol family 39 [519823.712058] NET: Unregistered protocol family 39 [519833.746069] device eth0 left promiscuous mode [519833.746086] bridge-eth0: disabled promiscuous mode [555073.224017] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445379400214063833 new 18445379400215245490 attempts 1 [640862.736050] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445379400215245490 new 18445379400216452017 attempts 1