[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 (Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=3cf12645-193f-4047-9c85-5ace0825f970 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF00000000 write-back [ 0.000000] 1 base 0100000000 mask FF80000000 write-back [ 0.000000] 2 base 0080000000 mask FF80000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] modified: 000000007ffb0000 - 000000007ffc0000 (ACPI data) [ 0.000000] modified: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) [ 0.000000] modified: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000ff7c0000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000180000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffb0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ffb0000 page 4k [ 0.000000] kernel direct mapping tables up to 7ffb0000 @ 10000-14000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000180000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0180000000 page 2M [ 0.000000] kernel direct mapping tables up to 180000000 @ 12000-19000 [ 0.000000] RAMDISK: 3767f000 - 37fefb42 [ 0.000000] ACPI: RSDP 00000000000f9a50 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000007ffb0000 00034 (v01 A M I OEMRSDT 09000625 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ffb0200 00084 (v02 A M I OEMFACP 09000625 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007ffb0440 0474D (v01 939M2 939M2222 00000222 INTL 02002026) [ 0.000000] ACPI: FACS 000000007ffc0000 00040 [ 0.000000] ACPI: APIC 000000007ffb0390 00068 (v01 A M I OEMAPIC 09000625 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ffb0400 0003C (v01 A M I OEMMCFG 09000625 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ffc0040 00057 (v01 A M I AMI_OEM 09000625 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000180000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 [ 0.000000] NODE_DATA [0000000000014000 - 0000000000018fff] [ 0.000000] bootmap [0000000000019000 - 0000000000048fff] pages 30 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0180000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [003767f000 - 0037fefb42] RAMDISK ==> [003767f000 - 0037fefb42] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a300a9] BRK ==> [0001a30000 - 0001a300a9] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000014000] PGTABLE ==> [0000012000 - 0000014000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00180000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffb0 [ 0.000000] 0: 0x00100000 -> 0x00180000 [ 0.000000] On node 0 totalpages: 1048383 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3824 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 505832 pages, LIFO batch:31 [ 0.000000] Normal zone: 7168 pages used for memmap [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 24-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007ffb0000 - 000000007ffc0000 [ 0.000000] PM: Registered nosave memory: 000000007ffc0000 - 000000007fff0000 [ 0.000000] PM: Registered nosave memory: 000000007fff0000 - 0000000080000000 [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000ff7c0000 [ 0.000000] PM: Registered nosave memory: 00000000ff7c0000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7f7c0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1026776 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=3cf12645-193f-4047-9c85-5ace0825f970 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] AGP bridge at 00:04:00 [ 0.000000] Aperture from AGP @ d0000000 old size 32 MB [ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB [ 0.000000] Aperture from AGP @ d0000000 size 32 MB (APSIZE 0) [ 0.000000] Node 0: aperture @ d0000000 size 256 MB [ 0.000000] Memory: 4115576k/6291456k available (5422k kernel code, 2097924k absent, 77956k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:512 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2200.164 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.32 BogoMIPS (lpj=22001640) [ 0.010038] Security Framework initialized [ 0.010063] AppArmor: AppArmor initialized [ 0.010473] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.020255] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.021732] Mount-cache hash table entries: 256 [ 0.021908] Initializing cgroup subsys ns [ 0.021913] Initializing cgroup subsys cpuacct [ 0.021917] Initializing cgroup subsys memory [ 0.021927] Initializing cgroup subsys devices [ 0.021929] Initializing cgroup subsys freezer [ 0.021931] Initializing cgroup subsys net_cls [ 0.021953] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.021955] CPU: L2 Cache: 512K (64 bytes/line) [ 0.021958] CPU 0/0x0 -> Node 0 [ 0.021960] tseg: 0000000000 [ 0.021976] CPU: Physical Processor ID: 0 [ 0.021978] CPU: Processor Core ID: 0 [ 0.021981] mce: CPU supports 5 MCE banks [ 0.021993] Performance Events: AMD PMU driver. [ 0.021999] ... version: 0 [ 0.022000] ... bit width: 48 [ 0.022002] ... generic registers: 4 [ 0.022003] ... value mask: 0000ffffffffffff [ 0.022005] ... max period: 00007fffffffffff [ 0.022007] ... fixed-purpose events: 0 [ 0.022008] ... event mask: 000000000000000f [ 0.023634] ACPI: Core revision 20090903 [ 0.029868] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.029874] ftrace: allocating 22529 entries in 89 pages [ 0.036318] Setting APIC routing to flat [ 0.037098] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.137124] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01 [ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.290071] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01 [ 0.290084] Brought up 2 CPUs [ 0.290087] Total of 2 processors activated (8800.59 BogoMIPS). [ 0.290368] CPU0 attaching sched-domain: [ 0.290371] domain 0: span 0-1 level MC [ 0.290374] groups: 0 1 [ 0.290379] CPU1 attaching sched-domain: [ 0.290381] domain 0: span 0-1 level MC [ 0.290383] groups: 1 0 [ 0.290477] devtmpfs: initialized [ 0.290477] regulator: core version 0.5 [ 0.290477] Time: 8:41:59 Date: 09/30/10 [ 0.290477] NET: Registered protocol family 16 [ 0.290477] node 0 link 0: io port [1000, ffffff] [ 0.290477] Trying to unpack rootfs image as initramfs... [ 0.290477] TOM: 0000000080000000 aka 2048M [ 0.290477] node 0 link 0: mmio [e0000000, efffffff] [ 0.290477] node 0 link 0: mmio [a0000, bffff] [ 0.290477] node 0 link 0: mmio [80000000, ffffffff] [ 0.290477] TOM2: 0000000180000000 aka 6144M [ 0.290477] bus: [00,ff] on node 0 link 0 [ 0.290477] bus: 00 index 0 io port: [0, ffff] [ 0.290477] bus: 00 index 1 mmio: [80000000, ffffffff] [ 0.290477] bus: 00 index 2 mmio: [a0000, bffff] [ 0.290477] bus: 00 index 3 mmio: [180000000, fcffffffff] [ 0.290477] ACPI: bus type pci registered [ 0.290477] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.290477] PCI: Not using MMCONFIG. [ 0.290477] PCI: Using configuration type 1 for base access [ 0.300135] bio: create slab at 0 [ 0.300718] ACPI: EC: Look up EC in DSDT [ 0.302993] ACPI: Executed 1 blocks of module-level executable AML code [ 0.521376] Freeing initrd memory: 9666k freed [ 0.801282] ACPI: Interpreter enabled [ 0.801286] ACPI: (supports S0 S1 S3 S4 S5) [ 0.801308] ACPI: Using IOAPIC for interrupt routing [ 0.801474] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.804550] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.815353] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.821370] ACPI Warning: Incorrect checksum in table [OEMB] - 7C, should be 77 (20090903/tbutils-314) [ 0.821463] ACPI: No dock devices found. [ 0.821581] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.821697] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.821701] pci 0000:00:01.0: PME# disabled [ 0.821742] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.821745] pci 0000:00:02.0: PME# disabled [ 0.821787] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.821789] pci 0000:00:03.0: PME# disabled [ 0.821821] pci 0000:00:04.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.822018] pci 0000:00:07.1: quirk: region 0800-083f claimed by ali7101 ACPI [ 0.822061] pci 0000:00:11.0: reg 10 io port: [0xe800-0xe8ff] [ 0.822067] pci 0000:00:11.0: reg 14 32bit mmio: [0xfebffc00-0xfebffcff] [ 0.822093] pci 0000:00:11.0: PME# supported from D3hot D3cold [ 0.822096] pci 0000:00:11.0: PME# disabled [ 0.822125] pci 0000:00:12.0: reg 20 io port: [0xff00-0xff0f] [ 0.822152] pci 0000:00:13.0: reg 10 32bit mmio: [0xfebfe000-0xfebfefff] [ 0.822189] pci 0000:00:13.1: reg 10 32bit mmio: [0xfebfd000-0xfebfdfff] [ 0.822226] pci 0000:00:13.2: reg 10 32bit mmio: [0xfebfc000-0xfebfcfff] [ 0.822274] pci 0000:00:13.3: reg 10 32bit mmio: [0xfebff800-0xfebff8ff] [ 0.822306] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold [ 0.822310] pci 0000:00:13.3: PME# disabled [ 0.822440] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.822449] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xa0000000-0xafffffff] [ 0.822457] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.822463] pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f] [ 0.822469] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe6e0000-0xfe6fffff] [ 0.822518] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.822521] pci 0000:00:01.0: bridge 32bit mmio: [0xf8600000-0xfe6fffff] [ 0.822525] pci 0000:00:01.0: bridge 32bit mmio pref: [0x9ff00000-0xbfefffff] [ 0.822549] pci 0000:00:02.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff] [ 0.822598] pci 0000:03:00.0: reg 10 io port: [0xcc00-0xcc07] [ 0.822606] pci 0000:03:00.0: reg 14 io port: [0xc880-0xc883] [ 0.822614] pci 0000:03:00.0: reg 18 io port: [0xc800-0xc807] [ 0.822621] pci 0000:03:00.0: reg 1c io port: [0xc480-0xc483] [ 0.822629] pci 0000:03:00.0: reg 20 io port: [0xc400-0xc40f] [ 0.822637] pci 0000:03:00.0: reg 24 32bit mmio: [0x000000-0x001fff] [ 0.822668] pci 0000:03:00.0: PME# supported from D3hot [ 0.822673] pci 0000:03:00.0: PME# disabled [ 0.822703] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] [ 0.822706] pci 0000:00:03.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.822748] pci 0000:00:05.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.822789] pci 0000:05:07.0: reg 10 io port: [0xdc00-0xdc3f] [ 0.822828] pci 0000:05:07.0: supports D1 D2 [ 0.822860] pci 0000:00:06.0: transparent bridge [ 0.822864] pci 0000:00:06.0: bridge io port: [0xd000-0xdfff] [ 0.822868] pci 0000:00:06.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.822888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.822963] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.823003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT] [ 0.823110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT] [ 0.823161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT] [ 0.823210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT] [ 0.832771] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled. [ 0.832935] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.833091] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15), disabled. [ 0.833252] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.833411] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.833573] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.833733] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.833893] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 [ 0.834053] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.834174] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.834177] vgaarb: loaded [ 0.834310] SCSI subsystem initialized [ 0.834385] libata version 3.00 loaded. [ 0.834385] usbcore: registered new interface driver usbfs [ 0.834385] usbcore: registered new interface driver hub [ 0.834385] usbcore: registered new device driver usb [ 0.834385] ACPI: WMI: Mapper loaded [ 0.834385] PCI: Using ACPI for IRQ routing [ 0.834385] pci 0000:00:04.0: BAR 0: address space collision on of device [0xd0000000-0xdfffffff] [ 0.834385] pci 0000:00:04.0: BAR 0: can't allocate resource [ 0.834385] NetLabel: Initializing [ 0.834385] NetLabel: domain hash size = 128 [ 0.834385] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.834385] NetLabel: unlabeled traffic allowed by default [ 0.834385] AppArmor: AppArmor Filesystem Enabled [ 0.834385] pnp: PnP ACPI init [ 0.834385] ACPI: bus type pnp registered [ 0.835166] pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 0 (0x0-0xfffffff), disabling [ 0.835170] pnp 00:0a: mem resource (0xc0000-0xcffff) overlaps 0000:00:04.0 BAR 0 (0x0-0xfffffff), disabling [ 0.835173] pnp 00:0a: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 0 (0x0-0xfffffff), disabling [ 0.835176] pnp 00:0a: mem resource (0x100000-0x7fffffff) overlaps 0000:00:04.0 BAR 0 (0x0-0xfffffff), disabling [ 0.840189] pnp: PnP ACPI: found 11 devices [ 0.840191] ACPI: ACPI bus type pnp unregistered [ 0.840205] system 00:06: ioport range 0x480-0x48f has been reserved [ 0.840208] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.840211] system 00:06: ioport range 0x800-0x87f could not be reserved [ 0.840214] system 00:06: ioport range 0x400-0x40f has been reserved [ 0.840220] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.840224] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.840226] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved [ 0.840229] system 00:07: iomem range 0xfec10000-0xfec10fff could not be reserved [ 0.840232] system 00:07: iomem range 0xffb00000-0xffffffff has been reserved [ 0.840237] system 00:09: ioport range 0x290-0x29f has been reserved [ 0.844939] Switching to clocksource acpi_pm [ 0.845005] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.845005] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.845005] pci 0000:00:01.0: MEM window: 0xf8600000-0xfe6fffff [ 0.845005] pci 0000:00:01.0: PREFETCH window: 0x9ff00000-0xbfefffff [ 0.845005] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.845005] pci 0000:00:02.0: IO window: disabled [ 0.845005] pci 0000:00:02.0: MEM window: 0xfe700000-0xfe7fffff [ 0.845005] pci 0000:00:02.0: PREFETCH window: disabled [ 0.845005] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 [ 0.845005] pci 0000:00:03.0: IO window: 0xc000-0xcfff [ 0.845005] pci 0000:00:03.0: MEM window: 0xfe800000-0xfe8fffff [ 0.845005] pci 0000:00:03.0: PREFETCH window: disabled [ 0.845005] pci 0000:00:05.0: PCI bridge, secondary bus 0000:04 [ 0.845005] pci 0000:00:05.0: IO window: disabled [ 0.845005] pci 0000:00:05.0: MEM window: 0xfe900000-0xfe9fffff [ 0.845005] pci 0000:00:05.0: PREFETCH window: disabled [ 0.845005] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05 [ 0.845005] pci 0000:00:06.0: IO window: 0xd000-0xdfff [ 0.845005] pci 0000:00:06.0: MEM window: 0xfea00000-0xfeafffff [ 0.845005] pci 0000:00:06.0: PREFETCH window: disabled [ 0.845005] alloc irq_desc for 29 on node 0 [ 0.845005] alloc kstat_irqs on node 0 [ 0.845005] pci 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 [ 0.845005] pci 0000:00:01.0: setting latency timer to 64 [ 0.845005] alloc irq_desc for 34 on node 0 [ 0.845005] alloc kstat_irqs on node 0 [ 0.845005] pci 0000:00:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [ 0.845005] pci 0000:00:02.0: setting latency timer to 64 [ 0.845005] alloc irq_desc for 39 on node 0 [ 0.845005] alloc kstat_irqs on node 0 [ 0.845005] pci 0000:00:03.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39 [ 0.845005] pci 0000:00:03.0: setting latency timer to 64 [ 0.845005] pci 0000:00:05.0: setting latency timer to 64 [ 0.845005] pci 0000:00:06.0: setting latency timer to 64 [ 0.845005] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.845005] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.845005] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.845005] pci_bus 0000:01: resource 1 mem: [0xf8600000-0xfe6fffff] [ 0.845005] pci_bus 0000:01: resource 2 pref mem [0x9ff00000-0xbfefffff] [ 0.845005] pci_bus 0000:02: resource 1 mem: [0xfe700000-0xfe7fffff] [ 0.845005] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.845005] pci_bus 0000:03: resource 1 mem: [0xfe800000-0xfe8fffff] [ 0.845005] pci_bus 0000:04: resource 1 mem: [0xfe900000-0xfe9fffff] [ 0.845005] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff] [ 0.845005] pci_bus 0000:05: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.845005] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.845005] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.845005] NET: Registered protocol family 2 [ 0.845005] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.845005] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.847808] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.848530] TCP: Hash tables configured (established 524288 bind 65536) [ 0.848534] TCP reno registered [ 0.848665] NET: Registered protocol family 1 [ 0.848697] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.848720] pci 0000:00:01.0: Enabling HT MSI Mapping [ 0.848740] pci 0000:00:02.0: Enabling HT MSI Mapping [ 0.848759] pci 0000:00:03.0: Enabling HT MSI Mapping [ 0.910048] pci 0000:01:00.0: Boot video device [ 0.910216] agpgart-amd64 0000:00:04.0: AGP bridge [10b9/1689] [ 0.910224] agpgart-amd64 0000:00:04.0: aperture size 4096 MB is not right, using settings from NB [ 0.910229] agpgart-amd64 0000:00:04.0: setting up ULi AGP [ 0.920208] agpgart-amd64 0000:00:04.0: AGP aperture is 256M @ 0xd0000000 [ 0.920262] init_memory_mapping: 00000000d0000000-00000000e0000000 [ 0.920264] NX (Execute Disable) protection: active [ 0.920267] 00d0000000 - 00e0000000 page 2M [ 0.920278] PCI-DMA: using GART IOMMU. [ 0.920282] PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture [ 0.921391] Scanning for low memory corruption every 60 seconds [ 0.921525] audit: initializing netlink socket (disabled) [ 0.921538] type=2000 audit(1285836119.920:1): initialized [ 0.930422] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.932090] VFS: Disk quotas dquot_6.5.2 [ 0.932156] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.932892] fuse init (API version 7.13) [ 0.932983] msgmni has been set to 8057 [ 0.933275] alg: No test for stdrng (krng) [ 0.933340] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.933343] io scheduler noop registered [ 0.933344] io scheduler anticipatory registered [ 0.933346] io scheduler deadline registered [ 0.933386] io scheduler cfq registered (default) [ 0.933568] alloc irq_desc for 40 on node 0 [ 0.933570] alloc kstat_irqs on node 0 [ 0.933580] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.933586] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.933731] alloc irq_desc for 41 on node 0 [ 0.933732] alloc kstat_irqs on node 0 [ 0.933738] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X [ 0.933743] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.933869] alloc irq_desc for 42 on node 0 [ 0.933871] alloc kstat_irqs on node 0 [ 0.933876] pcieport 0000:00:03.0: irq 42 for MSI/MSI-X [ 0.933880] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.934008] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 0.934014] aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support [ 0.934020] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 0.934028] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.934055] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.934171] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.934175] ACPI: Power Button [PWRB] [ 0.934223] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.934226] ACPI: Power Button [PWRF] [ 0.934511] processor LNXCPU:00: registered as cooling_device0 [ 0.934544] processor LNXCPU:01: registered as cooling_device1 [ 0.938553] Linux agpgart interface v0.103 [ 0.938596] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.938708] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.939002] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.940131] brd: module loaded [ 0.940638] loop: module loaded [ 0.940737] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.940996] alloc irq_desc for 19 on node 0 [ 0.940999] alloc kstat_irqs on node 0 [ 0.941007] pata_acpi 0000:00:12.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.941061] pata_acpi 0000:00:12.0: PCI INT A disabled [ 0.941437] Fixed MDIO Bus: probed [ 0.941471] PPP generic driver version 2.4.2 [ 0.941515] tun: Universal TUN/TAP device driver, 1.6 [ 0.941516] tun: (C) 1999-2004 Max Krasnyansky [ 0.941599] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.941647] alloc irq_desc for 23 on node 0 [ 0.941649] alloc kstat_irqs on node 0 [ 0.941653] ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.941676] ehci_hcd 0000:00:13.3: EHCI Host Controller [ 0.941707] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 1 [ 0.941743] ehci_hcd 0000:00:13.3: debug port 1 [ 0.970039] ehci_hcd 0000:00:13.3: irq 23, io mem 0xfebff800 [ 0.990016] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00 [ 0.990096] usb usb1: configuration #1 chosen from 1 choice [ 0.990125] hub 1-0:1.0: USB hub found [ 0.990133] hub 1-0:1.0: 8 ports detected [ 0.990210] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.990255] alloc irq_desc for 20 on node 0 [ 0.990256] alloc kstat_irqs on node 0 [ 0.990261] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.990272] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.990309] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.990339] ohci_hcd 0000:00:13.0: irq 20, io mem 0xfebfe000 [ 1.052079] usb usb2: configuration #1 chosen from 1 choice [ 1.052104] hub 2-0:1.0: USB hub found [ 1.052113] hub 2-0:1.0: 3 ports detected [ 1.052192] alloc irq_desc for 21 on node 0 [ 1.052193] alloc kstat_irqs on node 0 [ 1.052197] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.052206] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.052242] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.052272] ohci_hcd 0000:00:13.1: irq 21, io mem 0xfebfd000 [ 1.112073] usb usb3: configuration #1 chosen from 1 choice [ 1.112100] hub 3-0:1.0: USB hub found [ 1.112108] hub 3-0:1.0: 3 ports detected [ 1.112184] alloc irq_desc for 22 on node 0 [ 1.112186] alloc kstat_irqs on node 0 [ 1.112189] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.112200] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 1.112234] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.112264] ohci_hcd 0000:00:13.2: irq 22, io mem 0xfebfc000 [ 1.172074] usb usb4: configuration #1 chosen from 1 choice [ 1.172101] hub 4-0:1.0: USB hub found [ 1.172109] hub 4-0:1.0: 3 ports detected [ 1.172159] uhci_hcd: USB Universal Host Controller Interface driver [ 1.172253] PNP: No PS/2 controller found. Probing ports directly. [ 1.174732] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.174738] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.174846] mice: PS/2 mouse device common for all mice [ 1.174947] rtc_cmos 00:02: RTC can wake from S4 [ 1.174993] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.175024] rtc0: alarms up to one month, 114 bytes nvram [ 1.175156] device-mapper: uevent: version 1.0.3 [ 1.175273] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.175367] device-mapper: multipath: version 1.1.0 loaded [ 1.175370] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.175586] cpuidle: using governor ladder [ 1.175588] cpuidle: using governor menu [ 1.175955] TCP cubic registered [ 1.176089] NET: Registered protocol family 10 [ 1.176553] lo: Disabled Privacy Extensions [ 1.176831] NET: Registered protocol family 17 [ 1.176882] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) [ 1.176927] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 [ 1.176929] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa [ 1.176931] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc [ 1.176933] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 1.177060] PM: Resume from disk failed. [ 1.177079] registered taskstats version 1 [ 1.177371] Magic number: 10:253:676 [ 1.177466] rtc_cmos 00:02: setting system clock to 2010-09-30 08:42:00 UTC (1285836120) [ 1.177469] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.177471] EDD information not available. [ 1.177528] Freeing unused kernel memory: 880k freed [ 1.178047] Write protecting the kernel read-only data: 7696k [ 1.216298] udev[102]: starting version 163 [ 1.307630] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 1.311920] alloc irq_desc for 17 on node 0 [ 1.311924] alloc kstat_irqs on node 0 [ 1.311933] uli526x 0000:00:11.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.336445] ahci 0000:03:00.0: version 3.0 [ 1.336468] alloc irq_desc for 35 on node 0 [ 1.336470] alloc kstat_irqs on node 0 [ 1.336480] ahci 0000:03:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35 [ 1.350125] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 1.350132] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.350138] ahci 0000:03:00.0: setting latency timer to 64 [ 1.370764] scsi0 : ahci [ 1.370959] ata1: SATA max UDMA/133 abar m8192@0xfe800000 port 0xfe800100 irq 35 [ 1.376587] eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:48:ab:7a, irq 17. [ 1.378401] pata_ali 0000:00:12.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.378648] scsi1 : pata_ali [ 1.378814] scsi2 : pata_ali [ 1.380493] ata2: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.380496] ata3: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.432533] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 1.581085] usb 1-6: configuration #1 chosen from 1 choice [ 1.588940] Initializing USB Mass Storage driver... [ 1.589148] scsi3 : SCSI emulation for USB Mass Storage devices [ 1.589267] usbcore: registered new interface driver usb-storage [ 1.589270] USB Mass Storage support registered. [ 1.589276] usb-storage: device found at 4 [ 1.589277] usb-storage: waiting for device to settle before scanning [ 1.760043] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 1.900045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.906450] ata1.00: ATA-7: SAMSUNG HD753LJ, 1AA01109, max UDMA7 [ 1.906452] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.912932] ata1.00: configured for UDMA/133 [ 1.930139] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.930345] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.930507] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.930549] sd 0:0:0:0: [sda] Write Protect is off [ 1.930552] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.930573] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.930732] sda: sda1 sda2 < sda5 > [ 1.946402] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.988184] usb 3-1: configuration #1 chosen from 1 choice [ 2.110357] ata3.00: ATAPI: Optiarc DVD RW AD-5170A, 1.14, max UDMA/66 [ 2.110378] ata3.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 2.110381] ata3.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 2.150270] ata3.00: configured for UDMA/66 [ 2.151956] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-5170A 1.14 PQ: 0 ANSI: 5 [ 2.153277] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.153280] Uniform CD-ROM driver Revision: 3.20 [ 2.153413] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.153485] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.158490] usbcore: registered new interface driver hiddev [ 2.165421] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input3 [ 2.165542] generic-usb 0003:046D:C012.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1/input0 [ 2.165587] usbcore: registered new interface driver usbhid [ 2.165726] usbhid: v2.6:USB HID core driver [ 2.330035] usb 3-2: new low speed USB device using ohci_hcd and address 3 [ 2.339854] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.575189] usb 3-2: configuration #1 chosen from 1 choice [ 2.593423] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input4 [ 2.593509] generic-usb 0003:06A3:8020.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:13.1-2/input0 [ 2.625168] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.1/input/input5 [ 2.625333] generic-usb 0003:06A3:8020.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:13.1-2/input1 [ 6.580453] usb-storage: device scan complete [ 6.580921] scsi 3:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 2 [ 6.581462] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 6.582016] sd 3:0:0:0: [sdb] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 6.583387] sd 3:0:0:0: [sdb] Write Protect is off [ 6.583390] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 6.583393] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 6.585761] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 6.585767] sdb: sdb1 [ 6.588011] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 6.588014] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 8.225094] udev[477]: starting version 163 [ 8.292427] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.306674] ACPI: resource ali1563_smbus [0x400-0x40f] conflicts with ACPI region SMIO [0xb1-0x1000b0] [ 8.306678] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.306682] ali1563_smbus 0000:00:07.0: ALi1563 SMBus probe failed (-19) [ 8.448308] parport_pc 00:05: reported by Plug and Play ACPI [ 8.448438] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 8.452069] vga16fb: initializing [ 8.452075] vga16fb: mapped to 0xffff8800000a0000 [ 8.452182] fb0: VGA16 VGA frame buffer device [ 8.454504] lp: driver loaded but no devices found [ 8.459485] ali1535_smbus 0000:00:07.1: ALI1535_smb region uninitialized - upgrade BIOS? [ 8.459491] ali1535_smbus 0000:00:07.1: ALI1535 not detected, module not inserted. [ 8.550622] lp0: using parport0 (interrupt-driven). [ 8.590748] type=1505 audit(1285836127.912:2): operation="profile_load" pid=666 name="/sbin/dhclient3" [ 8.591033] type=1505 audit(1285836127.912:3): operation="profile_load" pid=666 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 8.591193] type=1505 audit(1285836127.912:4): operation="profile_load" pid=666 name="/usr/lib/connman/scripts/dhclient-script" [ 9.009022] nvidia: module license 'NVIDIA' taints kernel. [ 9.009025] Disabling lock debugging due to kernel taint [ 9.463081] ppdev: user-space parallel port driver [ 9.467715] EDAC MC: Ver: 2.1.0 Sep 16 2010 [ 9.470513] EDAC amd64_edac: Ver: 3.2.0 Sep 16 2010 [ 9.470575] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.694344] ali15x3_smbus 0000:00:07.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr [ 9.694348] ali15x3_smbus 0000:00:07.1: ALI15X3 not detected, module not inserted. [ 9.698374] alloc irq_desc for 25 on node 0 [ 9.698377] alloc kstat_irqs on node 0 [ 9.698386] nvidia 0000:01:00.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25 [ 9.698395] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.698400] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 9.699408] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 256.53 Fri Aug 27 20:27:48 PDT 2010 [ 9.711860] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 9.711870] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 9.711872] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 9.711873] (Note that use of the override may cause unknown side effects.) [ 9.711901] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 9.746349] Console: switching to colour frame buffer device 80x30 [ 9.771897] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 9.772751] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 9.772755] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 9.772757] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 10.241830] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.334908] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 10.821582] EMU10K1_Audigy 0000:05:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.825223] Audigy2 value: Special config. [ 11.496070] type=1505 audit(1285836130.812:5): operation="profile_load" pid=1062 name="/usr/share/gdm/guest-session/Xsession" [ 11.500558] type=1505 audit(1285836130.822:6): operation="profile_load" pid=1064 name="/usr/bin/evince" [ 11.504883] type=1505 audit(1285836130.822:7): operation="profile_replace" pid=1063 name="/sbin/dhclient3" [ 11.505177] type=1505 audit(1285836130.822:8): operation="profile_replace" pid=1063 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.505340] type=1505 audit(1285836130.822:9): operation="profile_replace" pid=1063 name="/usr/lib/connman/scripts/dhclient-script" [ 11.515510] type=1505 audit(1285836130.832:10): operation="profile_load" pid=1064 name="/usr/bin/evince-previewer" [ 11.517774] type=1505 audit(1285836130.832:11): operation="profile_load" pid=1064 name="/usr/bin/evince-thumbnailer" [ 11.777965] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.306004] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 12.306009] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 12.306010] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 12.306012] vboxdrv: the usage of hardware performance counters by [ 12.306013] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 12.306017] vboxdrv: Found 2 processor cores. [ 12.306633] VBoxDrv: dbg - g_abExecMemory=ffffffffa0daac80 [ 12.306654] vboxdrv: fAsync=1 offMin=0x20016 offMax=0x20016 [ 12.307285] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 12.307289] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001). [ 14.770334] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex [ 14.770987] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.910013] eth0: no IPv6 routers present [ 76.790024] Clocksource tsc unstable (delta = -125391880 ns) [ 261.451194] lo: Disabled Privacy Extensions [ 275.875695] lo: Disabled Privacy Extensions [ 688.505858] lo: Disabled Privacy Extensions [ 748.321691] __ratelimit: 12 callbacks suppressed [ 748.321697] npviewer.bin[2539]: segfault at f555404c ip 00000000f610d757 sp 00000000ffdeaf10 error 4 in libflashplayer.so[f5d6e000+b2c000] [ 958.745578] usb 1-6: USB disconnect, address 4 [ 962.900053] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 963.151975] usb 1-6: configuration #1 chosen from 1 choice [ 963.153619] scsi4 : SCSI emulation for USB Mass Storage devices [ 963.153929] usb-storage: device found at 5 [ 963.153933] usb-storage: waiting for device to settle before scanning [ 968.153524] usb-storage: device scan complete [ 968.185350] scsi 4:0:0:0: Direct-Access Sony MSAC-UAM1 1.00 PQ: 0 ANSI: 0 CCS [ 968.186474] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 968.794348] sd 4:0:0:0: [sdb] 3995648 512-byte logical blocks: (2.04 GB/1.90 GiB) [ 968.795201] sd 4:0:0:0: [sdb] Write Protect is off [ 968.795207] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 968.795213] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 968.799079] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 968.799090] sdb: sdb1 [ 968.805941] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 968.805953] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 1045.640383] usb 1-6: USB disconnect, address 5 [ 2111.570178] lo: Disabled Privacy Extensions [ 2357.062795] PM: Syncing filesystems ... done. [ 2357.222526] PM: Preparing system for mem sleep [ 2357.222532] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 2357.224181] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 2357.224292] PM: Entering mem sleep [ 2357.224307] Suspending console(s) (use no_console_suspend to debug) [ 2357.270047] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2357.314481] sd 0:0:0:0: [sda] Stopping disk [ 2357.315558] serial 00:08: disabled [ 2357.315803] parport_pc 00:05: disabled [ 2357.332603] EMU10K1_Audigy 0000:05:07.0: PCI INT A disabled [ 2357.332637] ACPI handle has no context! [ 2357.370092] ahci 0000:03:00.0: PCI INT A disabled [ 2357.415768] ehci_hcd 0000:00:13.3: PCI INT D disabled [ 2357.415779] ohci_hcd 0000:00:13.2: PCI INT C disabled [ 2357.415786] ohci_hcd 0000:00:13.1: PCI INT B disabled [ 2357.415794] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 2357.415944] pata_ali 0000:00:12.0: PCI INT A disabled [ 2357.416228] PM: suspend of devices complete after 191.676 msecs [ 2357.416230] PM: suspend devices took 0.190 seconds [ 2357.430281] PM: late suspend of devices complete after 14.046 msecs [ 2357.430343] ACPI: Preparing to enter system sleep state S3 [ 2357.910015] Disabling non-boot CPUs ... [ 2357.910040] CPU0 attaching NULL sched-domain. [ 2357.910044] CPU1 attaching NULL sched-domain. [ 2358.070021] CPU0 attaching NULL sched-domain. [ 2358.180016] CPU 1 is now offline [ 2358.180018] SMP alternatives: switching to UP code [ 2358.185797] Back to C! [ 2358.185797] Enabling non-boot CPUs ... [ 2358.185797] SMP alternatives: switching to SMP code [ 2358.190987] Booting processor 1 APIC 0x1 ip 0x6000 [ 2358.185120] Initializing CPU#1 [ 2358.185120] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 2358.185120] CPU: L2 Cache: 512K (64 bytes/line) [ 2358.185120] CPU 1/0x1 -> Node 0 [ 2358.185120] CPU: Physical Processor ID: 0 [ 2358.185120] CPU: Processor Core ID: 1 [ 2358.350072] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01 [ 2358.350188] CPU0 attaching NULL sched-domain. [ 2358.420025] CPU0 attaching sched-domain: [ 2358.420028] domain 0: span 0-1 level MC [ 2358.420031] groups: 0 1 [ 2358.420035] CPU1 attaching sched-domain: [ 2358.420036] domain 0: span 0-1 level MC [ 2358.420038] groups: 1 0 [ 2358.420368] CPU1 is up [ 2358.420483] ACPI: Waking up from system sleep state S3 [ 2358.421376] pci 0000:00:00.0: Enabling HT MSI Mapping [ 2358.421402] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 2358.421432] pcieport 0000:00:01.0: Enabling HT MSI Mapping [ 2358.421453] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [ 2358.421481] pcieport 0000:00:02.0: Enabling HT MSI Mapping [ 2358.421502] pcieport 0000:00:03.0: restoring config space at offset 0x1 (was 0x40100107, writing 0x40100507) [ 2358.421530] pcieport 0000:00:03.0: Enabling HT MSI Mapping [ 2358.421715] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a80117, writing 0x2a80113) [ 2358.421735] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2a80117, writing 0x2a80113) [ 2358.421755] ohci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2a80117, writing 0x2a80113) [ 2358.421779] ehci_hcd 0000:00:13.3: restoring config space at offset 0x1 (was 0x2b00116, writing 0x2b00112) [ 2358.421836] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xfe6e0000, writing 0x0) [ 2358.421847] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 2358.421852] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007) [ 2358.421887] ahci 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 2358.421899] ahci 0000:03:00.0: restoring config space at offset 0x9 (was 0x0, writing 0xfe800000) [ 2358.421904] ahci 0000:03:00.0: restoring config space at offset 0x8 (was 0x1, writing 0xc401) [ 2358.421909] ahci 0000:03:00.0: restoring config space at offset 0x7 (was 0x1, writing 0xc481) [ 2358.421914] ahci 0000:03:00.0: restoring config space at offset 0x6 (was 0x1, writing 0xc801) [ 2358.421919] ahci 0000:03:00.0: restoring config space at offset 0x5 (was 0x1, writing 0xc881) [ 2358.421925] ahci 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xcc01) [ 2358.421930] ahci 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 2358.421936] ahci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 2358.421982] EMU10K1_Audigy 0000:05:07.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) [ 2358.422297] PM: early resume of devices complete after 1.032 msecs [ 2358.422538] pci 0000:00:05.0: setting latency timer to 64 [ 2358.422547] pci 0000:00:06.0: setting latency timer to 64 [ 2358.422566] pata_ali 0000:00:12.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2358.425438] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2358.450016] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2358.480021] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2358.510028] ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2358.669324] ata3.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out [ 2358.951526] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 441.474 msecs [ 2358.951681] ahci 0000:03:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35 [ 2358.951687] ahci 0000:03:00.0: setting latency timer to 64 [ 2358.970239] EMU10K1_Audigy 0000:05:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2358.973756] Audigy2 value: Special config. [ 2358.988386] parport_pc 00:05: activated [ 2358.989289] serial 00:08: activated [ 2358.990243] ata3.00: configured for UDMA/66 [ 2359.160021] PM: resume of drv:usb dev:usb3 complete after 109.968 msecs [ 2359.160499] sd 0:0:0:0: [sda] Starting disk [ 2360.580023] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2360.592855] ata1.00: configured for UDMA/133 [ 2360.613291] PM: resume of drv:sd dev:0:0:0:0 complete after 1452.793 msecs [ 2360.620246] PM: resume of devices complete after 2197.878 msecs [ 2360.620382] PM: resume devices took 2.200 seconds [ 2360.620404] PM: Finishing wakeup. [ 2360.620405] Restarting tasks ... done. [ 2361.091936] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2364.080360] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex [ 2364.081558] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2372.192562] lo: Disabled Privacy Extensions [ 2374.410021] eth0: no IPv6 routers present [ 2438.932778] PM: Syncing filesystems ... done. [ 2439.022527] PM: Preparing system for mem sleep [ 2439.022533] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 2439.024155] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 2439.024275] PM: Entering mem sleep [ 2439.024290] Suspending console(s) (use no_console_suspend to debug) [ 2439.070039] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2439.070154] sd 0:0:0:0: [sda] Stopping disk [ 2439.071127] serial 00:08: disabled [ 2439.071341] parport_pc 00:05: disabled [ 2439.085178] EMU10K1_Audigy 0000:05:07.0: PCI INT A disabled [ 2439.085207] ACPI handle has no context! [ 2439.120100] ahci 0000:03:00.0: PCI INT A disabled [ 2439.171060] ehci_hcd 0000:00:13.3: PCI INT D disabled [ 2439.171070] ohci_hcd 0000:00:13.2: PCI INT C disabled [ 2439.171077] ohci_hcd 0000:00:13.1: PCI INT B disabled [ 2439.171083] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 2439.171170] pata_ali 0000:00:12.0: PCI INT A disabled [ 2439.171412] PM: suspend of devices complete after 146.874 msecs [ 2439.171415] PM: suspend devices took 0.150 seconds [ 2439.190282] PM: late suspend of devices complete after 18.862 msecs [ 2439.190346] ACPI: Preparing to enter system sleep state S3 [ 2439.630012] Disabling non-boot CPUs ... [ 2439.630035] CPU0 attaching NULL sched-domain. [ 2439.630039] CPU1 attaching NULL sched-domain. [ 2439.790019] CPU0 attaching NULL sched-domain. [ 2439.900014] CPU 1 is now offline [ 2439.900016] SMP alternatives: switching to UP code [ 2439.905582] Back to C! [ 2439.905582] Enabling non-boot CPUs ... [ 2439.905582] SMP alternatives: switching to SMP code [ 2439.910754] Booting processor 1 APIC 0x1 ip 0x6000 [ 2439.905101] Initializing CPU#1 [ 2439.905101] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 2439.905101] CPU: L2 Cache: 512K (64 bytes/line) [ 2439.905101] CPU 1/0x1 -> Node 0 [ 2439.905101] CPU: Physical Processor ID: 0 [ 2439.905101] CPU: Processor Core ID: 1 [ 2440.070058] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01 [ 2440.070184] CPU0 attaching NULL sched-domain. [ 2440.140027] CPU0 attaching sched-domain: [ 2440.140031] domain 0: span 0-1 level MC [ 2440.140033] groups: 0 1 [ 2440.140037] CPU1 attaching sched-domain: [ 2440.140038] domain 0: span 0-1 level MC [ 2440.140040] groups: 1 0 [ 2440.140375] CPU1 is up [ 2440.140490] ACPI: Waking up from system sleep state S3 [ 2440.141381] pci 0000:00:00.0: Enabling HT MSI Mapping [ 2440.141407] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 2440.141437] pcieport 0000:00:01.0: Enabling HT MSI Mapping [ 2440.141458] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [ 2440.141487] pcieport 0000:00:02.0: Enabling HT MSI Mapping [ 2440.141507] pcieport 0000:00:03.0: restoring config space at offset 0x1 (was 0x40100107, writing 0x40100507) [ 2440.141535] pcieport 0000:00:03.0: Enabling HT MSI Mapping [ 2440.141720] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a80117, writing 0x2a80113) [ 2440.141740] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2a80117, writing 0x2a80113) [ 2440.141760] ohci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2a80117, writing 0x2a80113) [ 2440.141784] ehci_hcd 0000:00:13.3: restoring config space at offset 0x1 (was 0x2b00116, writing 0x2b00112) [ 2440.141842] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xfe6e0000, writing 0x0) [ 2440.141853] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 2440.141857] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007) [ 2440.141893] ahci 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 2440.141905] ahci 0000:03:00.0: restoring config space at offset 0x9 (was 0x0, writing 0xfe800000) [ 2440.141910] ahci 0000:03:00.0: restoring config space at offset 0x8 (was 0x1, writing 0xc401) [ 2440.141915] ahci 0000:03:00.0: restoring config space at offset 0x7 (was 0x1, writing 0xc481) [ 2440.141920] ahci 0000:03:00.0: restoring config space at offset 0x6 (was 0x1, writing 0xc801) [ 2440.141925] ahci 0000:03:00.0: restoring config space at offset 0x5 (was 0x1, writing 0xc881) [ 2440.141931] ahci 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xcc01) [ 2440.141936] ahci 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 2440.141942] ahci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 2440.141988] EMU10K1_Audigy 0000:05:07.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) [ 2440.142303] PM: early resume of devices complete after 1.033 msecs [ 2440.142546] pci 0000:00:05.0: setting latency timer to 64 [ 2440.142554] pci 0000:00:06.0: setting latency timer to 64 [ 2440.142574] pata_ali 0000:00:12.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2440.145296] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2440.170017] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2440.200021] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2440.230019] ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2440.672226] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 442.183 msecs [ 2440.672561] ata3.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out [ 2440.672749] ahci 0000:03:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35 [ 2440.672755] ahci 0000:03:00.0: setting latency timer to 64 [ 2440.690177] EMU10K1_Audigy 0000:05:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2440.693697] Audigy2 value: Special config. [ 2440.708309] parport_pc 00:05: activated [ 2440.709209] serial 00:08: activated [ 2440.850215] ata3.00: configured for UDMA/66 [ 2440.880022] PM: resume of drv:usb dev:usb3 complete after 109.854 msecs [ 2440.880499] sd 0:0:0:0: [sda] Starting disk [ 2447.280025] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2447.292866] ata1.00: configured for UDMA/133 [ 2447.314775] PM: resume of drv:sd dev:0:0:0:0 complete after 6434.277 msecs [ 2447.321283] PM: resume of devices complete after 7178.910 msecs [ 2447.321441] PM: resume devices took 7.180 seconds [ 2447.321464] PM: Finishing wakeup. [ 2447.321466] Restarting tasks ... done. [ 2447.567355] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2450.560370] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex [ 2450.561555] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2461.490032] eth0: no IPv6 routers present [ 2479.967547] lo: Disabled Privacy Extensions [ 2731.599076] lo: Disabled Privacy Extensions [ 3082.021455] update-apt-xapi[5246] general protection ip:4d4120 sp:7fff537c0550 error:0 in python2.6[400000+21a000] [ 3087.818600] apport-checkrep[5251] general protection ip:4d36f0 sp:7ffff46ddc58 error:0 in python2.6[400000+21a000] [ 3089.071657] apport-checkrep[5255] general protection ip:4d4120 sp:7fff2057c980 error:0 in python2.6[400000+21a000]