[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-17-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 (Ubuntu 2.6.31-17.54-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable) [ 0.000000] BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved) [ 0.000000] BIOS-e820: 00000000bf8a7000 - 00000000bf9c2000 (usable) [ 0.000000] BIOS-e820: 00000000bf9c2000 - 00000000bfa0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bfa0f000 - 00000000bfb09000 (usable) [ 0.000000] BIOS-e820: 00000000bfb09000 - 00000000bfd0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable) [ 0.000000] BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved) [ 0.000000] BIOS-e820: 00000000bfd1f000 - 00000000bfd63000 (usable) [ 0.000000] BIOS-e820: 00000000bfd63000 - 00000000bfd9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfd9f000 - 00000000bfde4000 (usable) [ 0.000000] BIOS-e820: 00000000bfde4000 - 00000000bfdff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xbfe00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009c400 (usable) [ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf8a1000 (usable) [ 0.000000] modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved) [ 0.000000] modified: 00000000bf8a7000 - 00000000bf9c2000 (usable) [ 0.000000] modified: 00000000bf9c2000 - 00000000bfa0f000 (reserved) [ 0.000000] modified: 00000000bfa0f000 - 00000000bfb09000 (usable) [ 0.000000] modified: 00000000bfb09000 - 00000000bfd0f000 (reserved) [ 0.000000] modified: 00000000bfd0f000 - 00000000bfd18000 (usable) [ 0.000000] modified: 00000000bfd18000 - 00000000bfd1f000 (reserved) [ 0.000000] modified: 00000000bfd1f000 - 00000000bfd63000 (usable) [ 0.000000] modified: 00000000bfd63000 - 00000000bfd9f000 (ACPI NVS) [ 0.000000] modified: 00000000bfd9f000 - 00000000bfde4000 (usable) [ 0.000000] modified: 00000000bfde4000 - 00000000bfdff000 (ACPI data) [ 0.000000] modified: 00000000bfdff000 - 00000000bfe00000 (usable) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3786c000 - 37feffc9 [ 0.000000] Allocated new RAMDISK: 008ad000 - 01030fc9 [ 0.000000] Move RAMDISK from 000000003786c000 - 0000000037feffc8 to 008ad000 - 01030fc8 [ 0.000000] ACPI: RSDP 000f7900 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT bfdf7f18 00074 (v01 DELL M09 06040000 LTP 00000000) [ 0.000000] ACPI: FACP bfde8000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT bfde9000 06BFA (v02 Intel CANTIGA 06040000 INTL 20050624) [ 0.000000] ACPI: FACS bfd9efc0 00040 [ 0.000000] ACPI: HPET bfdfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG bfdfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC bfdfed8a 00068 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT bfdfedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC bfdfee1a 00176 (v01 DELL M09 06040000 LTP 00000000) [ 0.000000] ACPI: OSFR bfdfef90 00070 (v01 DELL DELL 06040000 ASL 00000061) [ 0.000000] ACPI: SSDT bfde7000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT bfde6000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT bfde5000 0020F (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2182MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac168] BRK ==> [00008a9000 - 00008ac168] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0001030fc9] NEW RAMDISK ==> [00008ad000 - 0001030fc9] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f79b0] f79b0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[9] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bf8a1 [ 0.000000] 0: 0x000bf8a7 -> 0x000bf9c2 [ 0.000000] 0: 0x000bfa0f -> 0x000bfb09 [ 0.000000] 0: 0x000bfd0f -> 0x000bfd18 [ 0.000000] 0: 0x000bfd1f -> 0x000bfd63 [ 0.000000] 0: 0x000bfd9f -> 0x000bfde4 [ 0.000000] 0: 0x000bfdff -> 0x000bfe00 [ 0.000000] On node 0 totalpages: 785121 [ 0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c1031000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3960 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4365 pages used for memmap [ 0.000000] HighMem zone: 553534 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bfe00000 (gap: bfe00000:40200000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2841000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778980 [ 0.000000] Kernel command line: root=UUID=5f2b8f27-54cb-4376-8103-cd85912a7712 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 15718400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfe00) [ 0.000000] Memory: 3083040k/3143680k available (4566k kernel code, 56484k reserved, 2142k data, 540k init, 2231596k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575a64 - 0xc078d408 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575a64 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2393.402 MHz processor. [ 0.001310] Console: colour VGA+ 80x25 [ 0.001313] console [tty0] enabled [ 0.001454] hpet clockevent registered [ 0.001458] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.001463] Calibrating delay loop (skipped), value calculated using timer frequency.. 4786.80 BogoMIPS (lpj=9573608) [ 0.001478] Security Framework initialized [ 0.001494] AppArmor: AppArmor initialized [ 0.001499] Mount-cache hash table entries: 512 [ 0.001604] Initializing cgroup subsys ns [ 0.001608] Initializing cgroup subsys cpuacct [ 0.001611] Initializing cgroup subsys memory [ 0.001617] Initializing cgroup subsys freezer [ 0.001619] Initializing cgroup subsys net_cls [ 0.001631] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001633] CPU: L2 cache: 3072K [ 0.001635] CPU: Physical Processor ID: 0 [ 0.001637] CPU: Processor Core ID: 0 [ 0.001640] mce: CPU supports 6 MCE banks [ 0.001646] CPU0: Thermal monitoring enabled (TM2) [ 0.001649] using mwait in idle threads. [ 0.001654] Performance Counters: Core2 events, Intel PMU driver. [ 0.001661] ... version: 2 [ 0.001662] ... bit width: 40 [ 0.001663] ... generic counters: 2 [ 0.001665] ... value mask: 000000ffffffffff [ 0.001666] ... max period: 000000007fffffff [ 0.001668] ... fixed-purpose counters: 3 [ 0.001669] ... counter mask: 0000000700000003 [ 0.001674] Checking 'hlt' instruction... OK. [ 0.018292] ACPI: Core revision 20090521 [ 0.028601] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070397] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4786.74 BogoMIPS (lpj=9573490) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.157516] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a [ 0.157529] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.160019] Brought up 2 CPUs [ 0.160021] Total of 2 processors activated (9573.54 BogoMIPS). [ 0.160066] CPU0 attaching sched-domain: [ 0.160069] domain 0: span 0-1 level MC [ 0.160071] groups: 0 1 [ 0.160075] CPU1 attaching sched-domain: [ 0.160077] domain 0: span 0-1 level MC [ 0.160079] groups: 1 0 [ 0.160141] Booting paravirtualized kernel on bare hardware [ 0.160170] regulator: core version 0.5 [ 0.160170] Time: 7:30:21 Date: 01/17/10 [ 0.160170] NET: Registered protocol family 16 [ 0.160175] EISA bus registered [ 0.160182] ACPI: bus type pci registered [ 0.160238] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.160241] PCI: Not using MMCONFIG. [ 0.160568] PCI: PCI BIOS revision 3.00 entry at 0xfde11, last bus=9 [ 0.160570] PCI: Using configuration type 1 for base access [ 0.164024] bio: create slab at 0 [ 0.165019] ACPI: EC: Look up EC in DSDT [ 0.170708] ACPI: BIOS _OSI(Linux) query ignored [ 0.175812] ACPI: Interpreter enabled [ 0.175817] ACPI: (supports S0 S3 S4 S5) [ 0.175835] ACPI: Using IOAPIC for interrupt routing [ 0.175875] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.176571] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.184455] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.184457] PCI: Using MMCONFIG for extended config space [ 0.192357] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.192359] ACPI: EC: driver started in interrupt mode [ 0.192677] ACPI: No dock devices found. [ 0.192750] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.192750] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.192750] pci 0000:00:01.0: PME# disabled [ 0.192750] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] [ 0.192750] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] [ 0.192750] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f] [ 0.192833] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc504800-0xfc504bff] [ 0.192903] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.192908] pci 0000:00:1a.7: PME# disabled [ 0.192960] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc500000-0xfc503fff] [ 0.193018] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.193022] pci 0000:00:1b.0: PME# disabled [ 0.193102] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.193106] pci 0000:00:1c.0: PME# disabled [ 0.193188] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.193192] pci 0000:00:1c.1: PME# disabled [ 0.193277] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.193281] pci 0000:00:1c.3: PME# disabled [ 0.193366] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.193369] pci 0000:00:1c.5: PME# disabled [ 0.193448] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.193549] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.193637] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.193728] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc504c00-0xfc504fff] [ 0.193795] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.193799] pci 0000:00:1d.7: PME# disabled [ 0.194033] pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7] [ 0.194040] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7] [ 0.194047] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef] [ 0.194055] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3] [ 0.194061] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df] [ 0.194069] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc504000-0xfc5047ff] [ 0.194112] pci 0000:00:1f.2: PME# supported from D3hot [ 0.194117] pci 0000:00:1f.2: PME# disabled [ 0.194153] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.194171] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.194232] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] [ 0.194240] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] [ 0.194247] pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfc00ffff] [ 0.194271] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.194300] pci 0000:01:00.0: supports D1 D2 [ 0.194344] pci 0000:01:00.1: reg 10 32bit mmio: [0xfc010000-0xfc013fff] [ 0.194404] pci 0000:01:00.1: supports D1 D2 [ 0.194470] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.194473] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff] [ 0.194477] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.194529] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] [ 0.194533] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] [ 0.194540] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.194628] pci 0000:04:00.0: reg 10 64bit mmio: [0xf8000000-0xf8001fff] [ 0.194739] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.194745] pci 0000:04:00.0: PME# disabled [ 0.194822] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] [ 0.194826] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.194833] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] [ 0.194887] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] [ 0.194892] pci 0000:00:1c.3: bridge 32bit mmio: [0xfa000000-0xfbffffff] [ 0.194899] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] [ 0.195135] pci 0000:08:00.0: reg 10 64bit mmio: [0xfc100000-0xfc10ffff] [ 0.195241] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.195247] pci 0000:08:00.0: PME# disabled [ 0.195322] pci 0000:00:1c.5: bridge 32bit mmio: [0xfc100000-0xfc1fffff] [ 0.195374] pci 0000:09:01.0: reg 10 32bit mmio: [0xfc200000-0xfc2007ff] [ 0.195440] pci 0000:09:01.0: supports D1 D2 [ 0.195442] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195447] pci 0000:09:01.0: PME# disabled [ 0.195491] pci 0000:09:01.1: reg 10 32bit mmio: [0xfc200800-0xfc2008ff] [ 0.195557] pci 0000:09:01.1: supports D1 D2 [ 0.195559] pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195564] pci 0000:09:01.1: PME# disabled [ 0.195609] pci 0000:09:01.2: reg 10 32bit mmio: [0xfc200c00-0xfc200cff] [ 0.195675] pci 0000:09:01.2: supports D1 D2 [ 0.195677] pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195682] pci 0000:09:01.2: PME# disabled [ 0.195728] pci 0000:09:01.3: reg 10 32bit mmio: [0xfc201000-0xfc2010ff] [ 0.195793] pci 0000:09:01.3: supports D1 D2 [ 0.195795] pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195800] pci 0000:09:01.3: PME# disabled [ 0.195844] pci 0000:09:01.4: reg 10 32bit mmio: [0xfc201400-0xfc2014ff] [ 0.195909] pci 0000:09:01.4: supports D1 D2 [ 0.195911] pci 0000:09:01.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195916] pci 0000:09:01.4: PME# disabled [ 0.195982] pci 0000:00:1e.0: transparent bridge [ 0.195989] pci 0000:00:1e.0: bridge 32bit mmio: [0xfc200000-0xfc2fffff] [ 0.196037] pci_bus 0000:00: on NUMA node 0 [ 0.196041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.196155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.196213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.196293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.196355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.196414] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.196464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.206099] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.206188] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.206275] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.206362] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.206450] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.206537] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.206624] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.206710] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.206852] SCSI subsystem initialized [ 0.208012] libata version 3.00 loaded. [ 0.208035] usbcore: registered new interface driver usbfs [ 0.208035] usbcore: registered new interface driver hub [ 0.208038] usbcore: registered new device driver usb [ 0.208057] ACPI: WMI: Mapper loaded [ 0.208059] PCI: Using ACPI for IRQ routing [ 0.216006] Bluetooth: Core ver 2.15 [ 0.216010] NET: Registered protocol family 31 [ 0.216011] Bluetooth: HCI device and connection manager initialized [ 0.216013] Bluetooth: HCI socket layer initialized [ 0.216015] NetLabel: Initializing [ 0.216016] NetLabel: domain hash size = 128 [ 0.216018] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.216028] NetLabel: unlabeled traffic allowed by default [ 0.216054] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.216058] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.233551] pnp: PnP ACPI init [ 0.233559] ACPI: bus type pnp registered [ 0.239482] pnp: PnP ACPI: found 10 devices [ 0.239484] ACPI: ACPI bus type pnp unregistered [ 0.239486] PnPBIOS: Disabled by ACPI PNP [ 0.239495] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.239500] system 00:04: ioport range 0x400-0x47f has been reserved [ 0.239503] system 00:04: ioport range 0x680-0x69f has been reserved [ 0.239505] system 00:04: ioport range 0x480-0x48f has been reserved [ 0.239508] system 00:04: ioport range 0xffff-0xffff has been reserved [ 0.239510] system 00:04: ioport range 0xffff-0xffff has been reserved [ 0.239512] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.239515] system 00:04: ioport range 0x1180-0x11ff has been reserved [ 0.239517] system 00:04: ioport range 0x164e-0x164f has been reserved [ 0.239520] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 0.239522] system 00:04: ioport range 0x900-0x97f has been reserved [ 0.239528] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.239530] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.239533] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.239535] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.239538] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 0.239540] system 00:09: iomem range 0xfeb00000-0xfeb03fff has been reserved [ 0.239542] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.239545] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.239547] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.274200] AppArmor: AppArmor Filesystem Enabled [ 0.274271] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.274273] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.274277] pci 0000:00:01.0: MEM window: 0xfc000000-0xfc0fffff [ 0.274280] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.274284] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.274287] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.274292] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff [ 0.274297] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.274304] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 0.274307] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 0.274312] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff [ 0.274316] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff [ 0.274323] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 0.274326] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 0.274332] pci 0000:00:1c.3: MEM window: 0xfa000000-0xfbffffff [ 0.274337] pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f5ffffff [ 0.274344] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 [ 0.274346] pci 0000:00:1c.5: IO window: disabled [ 0.274351] pci 0000:00:1c.5: MEM window: 0xfc100000-0xfc1fffff [ 0.274355] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.274359] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 0.274361] pci 0000:00:1e.0: IO window: disabled [ 0.274367] pci 0000:00:1e.0: MEM window: 0xfc200000-0xfc2fffff [ 0.274371] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.274380] alloc irq_desc for 16 on node -1 [ 0.274382] alloc kstat_irqs on node -1 [ 0.274386] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.274389] pci 0000:00:01.0: setting latency timer to 64 [ 0.274396] alloc irq_desc for 17 on node -1 [ 0.274397] alloc kstat_irqs on node -1 [ 0.274400] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.274404] pci 0000:00:1c.0: setting latency timer to 64 [ 0.274412] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.274417] pci 0000:00:1c.1: setting latency timer to 64 [ 0.274424] alloc irq_desc for 19 on node -1 [ 0.274425] alloc kstat_irqs on node -1 [ 0.274428] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.274433] pci 0000:00:1c.3: setting latency timer to 64 [ 0.274440] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.274444] pci 0000:00:1c.5: setting latency timer to 64 [ 0.274451] pci 0000:00:1e.0: setting latency timer to 64 [ 0.274455] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.274457] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.274459] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.274461] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc0fffff] [ 0.274463] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.274466] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.274468] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff] [ 0.274470] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff] [ 0.274472] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] [ 0.274474] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff] [ 0.274476] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff] [ 0.274478] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff] [ 0.274480] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff] [ 0.274482] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff] [ 0.274484] pci_bus 0000:08: resource 1 mem: [0xfc100000-0xfc1fffff] [ 0.274487] pci_bus 0000:09: resource 1 mem: [0xfc200000-0xfc2fffff] [ 0.274489] pci_bus 0000:09: resource 3 io: [0x00-0xffff] [ 0.274491] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff] [ 0.274517] NET: Registered protocol family 2 [ 0.274588] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.274821] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.275134] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.275304] TCP: Hash tables configured (established 131072 bind 65536) [ 0.275306] TCP reno registered [ 0.275359] NET: Registered protocol family 1 [ 0.275407] Trying to unpack rootfs image as initramfs... [ 0.441464] Freeing initrd memory: 7695k freed [ 0.444515] Simple Boot Flag at 0x36 set to 0x1 [ 0.444668] cpufreq-nforce2: No nForce2 chipset. [ 0.444691] Scanning for low memory corruption every 60 seconds [ 0.444782] audit: initializing netlink socket (disabled) [ 0.444797] type=2000 audit(1263713418.443:1): initialized [ 0.452035] highmem bounce pool size: 64 pages [ 0.452041] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.453242] VFS: Disk quotas dquot_6.5.2 [ 0.453290] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.453738] fuse init (API version 7.12) [ 0.453805] msgmni has been set to 1679 [ 0.453971] alg: No test for stdrng (krng) [ 0.453979] io scheduler noop registered [ 0.453981] io scheduler anticipatory registered [ 0.453983] io scheduler deadline registered [ 0.454017] io scheduler cfq registered (default) [ 0.454160] pci 0000:01:00.0: Boot video device [ 0.454270] alloc irq_desc for 24 on node -1 [ 0.454272] alloc kstat_irqs on node -1 [ 0.454280] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.454286] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.454401] alloc irq_desc for 25 on node -1 [ 0.454403] alloc kstat_irqs on node -1 [ 0.454411] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.454421] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.454559] alloc irq_desc for 26 on node -1 [ 0.454560] alloc kstat_irqs on node -1 [ 0.454568] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.454578] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.454718] alloc irq_desc for 27 on node -1 [ 0.454720] alloc kstat_irqs on node -1 [ 0.454727] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.454738] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.454876] alloc irq_desc for 28 on node -1 [ 0.454877] alloc kstat_irqs on node -1 [ 0.454885] pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X [ 0.454895] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.454989] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.455132] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.501548] Switched to high resolution mode on CPU 1 [ 0.503997] Switched to high resolution mode on CPU 0 [ 0.556064] ACPI: AC Adapter [ADP1] (on-line) [ 0.556114] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.556117] ACPI: Power Button [PWRF] [ 0.556166] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.556169] ACPI: Power Button [PWRB] [ 0.556202] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.556205] ACPI: Sleep Button [SLPB] [ 0.556240] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 0.556972] ACPI: Lid Switch [LID0] [ 0.557703] ACPI: SSDT bfd1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.558169] ACPI: SSDT bfd18620 00575 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.560102] Monitor-Mwait will be used to enter C-1 state [ 0.560120] Monitor-Mwait will be used to enter C-2 state [ 0.560136] Monitor-Mwait will be used to enter C-3 state [ 0.560142] Marking TSC unstable due to TSC halts in idle [ 0.560161] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.560180] processor LNXCPU:00: registered as cooling_device0 [ 0.560183] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.560572] ACPI: SSDT bfd19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.560925] ACPI: SSDT bfd19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.568592] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.568608] processor LNXCPU:01: registered as cooling_device1 [ 0.568611] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.572938] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.572945] ACPI: Thermal Zone [TZ00] (36 C) [ 0.574862] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.574869] ACPI: Thermal Zone [TZ01] (24 C) [ 0.580326] thermal LNXTHERM:03: registered as thermal_zone2 [ 0.580332] ACPI: Thermal Zone [TZ02] (26 C) [ 0.580375] isapnp: Scanning for PnP cards... [ 0.666825] ACPI: Battery Slot [BAT0] (battery present) [ 0.934796] isapnp: No Plug & Play device found [ 0.935749] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.936824] brd: module loaded [ 0.937188] loop: module loaded [ 0.937241] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.937299] ahci 0000:00:1f.2: version 3.0 [ 0.937310] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.937338] alloc irq_desc for 29 on node -1 [ 0.937339] alloc kstat_irqs on node -1 [ 0.937349] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 0.937422] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.937425] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part [ 0.937430] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.937661] scsi0 : ahci [ 0.937730] scsi1 : ahci [ 0.937775] scsi2 : ahci [ 0.937824] scsi3 : ahci [ 0.937870] scsi4 : ahci [ 0.937917] scsi5 : ahci [ 0.937951] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 29 [ 0.937955] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 29 [ 0.937956] ata3: DUMMY [ 0.937958] ata4: DUMMY [ 0.937960] ata5: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504300 irq 29 [ 0.937963] ata6: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504380 irq 29 [ 0.938735] Fixed MDIO Bus: probed [ 0.938762] PPP generic driver version 2.4.2 [ 0.938825] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.938840] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.938849] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.938852] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.938892] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.942786] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.942793] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.942804] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc504800 [ 0.956012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.956067] usb usb1: configuration #1 chosen from 1 choice [ 0.956090] hub 1-0:1.0: USB hub found [ 0.956096] hub 1-0:1.0: 6 ports detected [ 0.956154] alloc irq_desc for 23 on node -1 [ 0.956155] alloc kstat_irqs on node -1 [ 0.956159] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.956167] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.956171] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.956198] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.960096] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.960102] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.960113] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00 [ 0.972017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.972075] usb usb2: configuration #1 chosen from 1 choice [ 0.972096] hub 2-0:1.0: USB hub found [ 0.972101] hub 2-0:1.0: 6 ports detected [ 0.972153] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.972166] uhci_hcd: USB Universal Host Controller Interface driver [ 0.972182] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.972188] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.972191] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.972213] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.972245] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.972306] usb usb3: configuration #1 chosen from 1 choice [ 0.972329] hub 3-0:1.0: USB hub found [ 0.972334] hub 3-0:1.0: 2 ports detected [ 0.972372] alloc irq_desc for 21 on node -1 [ 0.972374] alloc kstat_irqs on node -1 [ 0.972377] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.972383] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.972386] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.972410] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.972441] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.972504] usb usb4: configuration #1 chosen from 1 choice [ 0.972524] hub 4-0:1.0: USB hub found [ 0.972532] hub 4-0:1.0: 2 ports detected [ 0.972571] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.972577] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.972580] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.972602] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.972626] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 [ 0.972690] usb usb5: configuration #1 chosen from 1 choice [ 0.972710] hub 5-0:1.0: USB hub found [ 0.972715] hub 5-0:1.0: 2 ports detected [ 0.972755] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.972760] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.972763] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.972790] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.972814] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 0.972875] usb usb6: configuration #1 chosen from 1 choice [ 0.972896] hub 6-0:1.0: USB hub found [ 0.972901] hub 6-0:1.0: 2 ports detected [ 0.972938] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.972943] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.972946] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.972969] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.972993] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 0.973061] usb usb7: configuration #1 chosen from 1 choice [ 0.973081] hub 7-0:1.0: USB hub found [ 0.973086] hub 7-0:1.0: 2 ports detected [ 0.973123] alloc irq_desc for 18 on node -1 [ 0.973125] alloc kstat_irqs on node -1 [ 0.973128] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.973133] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.973136] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.973161] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.973194] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 0.973256] usb usb8: configuration #1 chosen from 1 choice [ 0.973277] hub 8-0:1.0: USB hub found [ 0.973282] hub 8-0:1.0: 2 ports detected [ 0.973360] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.985534] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.985539] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.985585] mice: PS/2 mouse device common for all mice [ 0.985690] rtc_cmos 00:06: RTC can wake from S4 [ 0.985714] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.985741] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.985818] device-mapper: uevent: version 1.0.3 [ 0.985886] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.985955] device-mapper: multipath: version 1.1.0 loaded [ 0.985957] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.986056] EISA: Probing bus 0 at eisa.0 [ 0.986062] Cannot allocate resource for EISA slot 1 [ 0.986063] Cannot allocate resource for EISA slot 2 [ 0.986065] Cannot allocate resource for EISA slot 3 [ 0.986067] Cannot allocate resource for EISA slot 4 [ 0.986068] Cannot allocate resource for EISA slot 5 [ 0.986081] EISA: Detected 0 cards. [ 0.986216] cpuidle: using governor ladder [ 0.986313] cpuidle: using governor menu [ 0.986696] TCP cubic registered [ 0.986822] NET: Registered protocol family 10 [ 0.987181] lo: Disabled Privacy Extensions [ 0.987446] NET: Registered protocol family 17 [ 0.987458] Bluetooth: L2CAP ver 2.13 [ 0.987460] Bluetooth: L2CAP socket layer initialized [ 0.987462] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.987463] Bluetooth: SCO socket layer initialized [ 0.987492] Bluetooth: RFCOMM TTY layer initialized [ 0.987494] Bluetooth: RFCOMM socket layer initialized [ 0.987496] Bluetooth: RFCOMM ver 1.11 [ 0.992147] Using IPI No-Shortcut mode [ 0.992192] PM: Resume from disk failed. [ 0.992205] registered taskstats version 1 [ 0.992306] Magic number: 10:463:521 [ 0.992387] rtc_cmos 00:06: setting system clock to 2010-01-17 07:30:21 UTC (1263713421) [ 0.992390] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.992391] EDD information not available. [ 0.995227] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.264071] ata5: SATA link down (SStatus 0 SControl 300) [ 1.264093] ata6: SATA link down (SStatus 0 SControl 300) [ 1.380049] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 1.420089] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.428088] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.442614] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633A, D600, max UDMA/100 [ 1.442632] ata2.00: applying bridge limits [ 1.456689] ata2.00: configured for UDMA/100 [ 1.460612] ata1.00: ATA-8: WDC WD3200BEVT-75ZCT2, 11.01A11, max UDMA/133 [ 1.460616] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.463168] ata1.00: configured for UDMA/133 [ 1.476179] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 11.0 PQ: 0 ANSI: 5 [ 1.476278] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.476309] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.476345] sd 0:0:0:0: [sda] Write Protect is off [ 1.476347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.476365] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.476462] sda: [ 1.479007] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633A D600 PQ: 0 ANSI: 5 [ 1.484081] sda1 sda2 [ 1.507395] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.507430] Freeing unused kernel memory: 540k freed [ 1.507717] Write protecting the kernel text: 4568k [ 1.507769] Write protecting the kernel read-only data: 1836k [ 1.586299] usb 1-6: configuration #1 chosen from 1 choice [ 1.594307] Linux agpgart interface v0.103 [ 1.604443] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6 [ 1.604477] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 1.623442] tg3.c:v3.99 (April 20, 2009) [ 1.623613] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.623625] tg3 0000:08:00.0: setting latency timer to 64 [ 1.630050] tg3 0000:08:00.0: PME# disabled [ 1.669773] ohci1394 0000:09:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.705052] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.727062] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc200000-fc2007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.838619] usb 2-1: configuration #1 chosen from 1 choice [ 1.839442] hub 2-1:1.0: USB hub found [ 1.839791] hub 2-1:1.0: 4 ports detected [ 2.080083] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.169400] eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:22:19:ea:58:41 [ 2.169403] eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 2.169405] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.169407] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.262365] usb 3-1: configuration #1 chosen from 1 choice [ 2.264332] hub 3-1:1.0: USB hub found [ 2.266303] hub 3-1:1.0: 3 ports detected [ 2.344314] usb 2-1.1: new high speed USB device using ehci_hcd and address 3 [ 2.445026] usb 2-1.1: configuration #1 chosen from 1 choice [ 2.450452] Initializing USB Mass Storage driver... [ 2.450561] scsi6 : SCSI emulation for USB Mass Storage devices [ 2.450630] usbcore: registered new interface driver usb-storage [ 2.450633] USB Mass Storage support registered. [ 2.450683] usb-storage: device found at 3 [ 2.450685] usb-storage: waiting for device to settle before scanning [ 2.520308] usb 2-1.3: new high speed USB device using ehci_hcd and address 4 [ 2.579139] xor: automatically using best checksumming function: pIII_sse [ 2.597016] pIII_sse : 9599.000 MB/sec [ 2.597018] xor: using function: pIII_sse (9599.000 MB/sec) [ 2.598815] device-mapper: dm-raid45: initialized v0.2594b [ 2.621747] usb 2-1.3: configuration #1 chosen from 1 choice [ 2.622638] scsi7 : SCSI emulation for USB Mass Storage devices [ 2.622727] usb-storage: device found at 4 [ 2.622728] usb-storage: waiting for device to settle before scanning [ 2.697306] usb 3-1.1: new full speed USB device using uhci_hcd and address 3 [ 2.718572] PM: Starting manual resume from disk [ 2.718575] PM: Resume from partition 8:5 [ 2.718576] PM: Checking hibernation image. [ 2.718750] PM: Resume from disk failed. [ 2.767838] kjournald starting. Commit interval 5 seconds [ 2.767853] EXT3-fs: mounted filesystem with writeback data mode. [ 2.820388] usb 3-1.1: configuration #1 chosen from 1 choice [ 2.826449] usbcore: registered new interface driver hiddev [ 2.829564] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input7 [ 2.829616] generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0 [ 2.829626] usbcore: registered new interface driver usbhid [ 2.829628] usbhid: v2.6:USB HID core driver [ 2.897304] usb 3-1.2: new full speed USB device using uhci_hcd and address 4 [ 3.000420] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000000000000000] [ 3.020379] usb 3-1.2: configuration #1 chosen from 1 choice [ 3.027592] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input8 [ 3.027657] generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0 [ 3.742133] type=1505 audit(1263713424.248:2): operation="profile_load" pid=474 name=/usr/share/gdm/guest-session/Xsession [ 3.765510] type=1505 audit(1263713424.271:3): operation="profile_load" pid=475 name=/sbin/dhclient3 [ 3.766104] type=1505 audit(1263713424.271:4): operation="profile_load" pid=475 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.766422] type=1505 audit(1263713424.271:5): operation="profile_load" pid=475 name=/usr/lib/connman/scripts/dhclient-script [ 3.792333] type=1505 audit(1263713424.299:6): operation="profile_load" pid=476 name=/usr/bin/evince [ 3.801539] type=1505 audit(1263713424.307:7): operation="profile_load" pid=476 name=/usr/bin/evince-previewer [ 3.806972] type=1505 audit(1263713424.311:8): operation="profile_load" pid=476 name=/usr/bin/evince-thumbnailer [ 3.815141] type=1505 audit(1263713424.320:9): operation="profile_load" pid=478 name=/usr/bin/freshclam [ 7.448260] usb-storage: device scan complete [ 7.449353] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 7.449853] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 7.452336] sd 6:0:0:0: [sdb] 7829504 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 7.453058] sd 6:0:0:0: [sdb] Write Protect is off [ 7.453062] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 7.453065] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.459051] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.459057] sdb: sdb1 [ 7.461809] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.461813] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 7.620267] usb-storage: device scan complete [ 7.621354] scsi 7:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 7.621848] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 7.624333] sd 7:0:0:0: [sdc] 7829504 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 7.625058] sd 7:0:0:0: [sdc] Write Protect is off [ 7.625062] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 7.625065] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 7.631051] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 7.631055] sdc: sdc1 [ 7.633802] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 7.633806] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 35.650965] udev: starting version 147 [ 35.660616] lp: driver loaded but no devices found [ 35.727243] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 35.727247] Disabling lock debugging due to kernel taint [ 35.736456] Adding 9060620k swap on /dev/sda5. Priority:-1 extents:1 across:9060620k [ 35.836316] [fglrx] Maximum main memory to use for locked dma buffers: 2873 MBytes. [ 35.836619] [fglrx] vendor: 1002 device: 9591 count: 1 [ 35.837060] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 35.837075] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 35.837080] pci 0000:01:00.0: setting latency timer to 64 [ 35.837256] [fglrx] Kernel PAT support is enabled [ 35.837274] [fglrx] module loaded - fglrx 8.66.10 [Sep 3 2009] with 1 minors [ 35.863131] ricoh-mmc: Ricoh MMC Controller disabling driver [ 35.863133] ricoh-mmc: Copyright(c) Philip Langdale [ 35.863160] ricoh-mmc: Ricoh MMC controller found at 0000:09:01.2 [1180:0843] (rev 12) [ 35.863178] ricoh-mmc: Controller is now disabled. [ 35.868212] sdhci: Secure Digital Host Controller Interface driver [ 35.868214] sdhci: Copyright(c) Pierre Ossman [ 35.869248] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22) [ 35.869266] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 35.871296] Registered led device: mmc0:: [ 35.872334] mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA [ 35.876795] ip_tables: (C) 2000-2006 Netfilter Core Team [ 35.877833] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 35.902498] Linux video capture interface: v2.00 [ 35.905336] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63fa) [ 35.933475] cfg80211: Calling CRDA to update world regulatory domain [ 35.961531] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input9 [ 35.961579] usbcore: registered new interface driver uvcvideo [ 35.961582] USB Video Class driver (v0.1.0) [ 35.968003] cfg80211: World regulatory domain updated: [ 35.968006] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 35.968008] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 35.968010] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 35.968012] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 35.968014] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 35.968016] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 36.005408] EXT3 FS on sda1, internal journal [ 36.015674] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 36.015676] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 36.015740] iwlagn 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 36.015752] iwlagn 0000:04:00.0: setting latency timer to 64 [ 36.015788] iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 36.101800] alloc irq_desc for 22 on node -1 [ 36.101803] alloc kstat_irqs on node -1 [ 36.101811] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 36.101851] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 36.108563] input: Dell WMI hotkeys as /devices/virtual/input/input10 [ 36.113258] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 36.113320] alloc irq_desc for 30 on node -1 [ 36.113322] alloc kstat_irqs on node -1 [ 36.113341] iwlagn 0000:04:00.0: irq 30 for MSI/MSI-X [ 36.133660] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 36.133822] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 36.133824] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 36.133826] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 36.147865] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 36.181593] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 36.189252] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 36.189316] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 36.189364] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 36.189859] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 36.189885] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 36.382409] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input15 [ 36.404904] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input16 [ 36.577293] usb 3-1.3: new full speed USB device using uhci_hcd and address 5 [ 36.718405] usb 3-1.3: configuration #1 chosen from 1 choice [ 36.724248] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 36.724337] usbcore: registered new interface driver btusb [ 36.798238] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.798241] Bluetooth: BNEP filters: protocol multicast [ 36.811836] Bridge firewalling registered [ 36.859204] iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode [ 36.886396] __ratelimit: 15 callbacks suppressed [ 36.886399] type=1505 audit(1263713457.392:15): operation="profile_replace" pid=1279 name=/usr/share/gdm/guest-session/Xsession [ 36.887743] type=1505 audit(1263713457.392:16): operation="profile_replace" pid=1280 name=/sbin/dhclient3 [ 36.888354] type=1505 audit(1263713457.392:17): operation="profile_replace" pid=1280 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 36.888684] type=1505 audit(1263713457.392:18): operation="profile_replace" pid=1280 name=/usr/lib/connman/scripts/dhclient-script [ 36.891632] type=1505 audit(1263713457.396:19): operation="profile_replace" pid=1281 name=/usr/bin/evince [ 36.901517] type=1505 audit(1263713457.408:20): operation="profile_replace" pid=1281 name=/usr/bin/evince-previewer [ 36.907427] type=1505 audit(1263713457.412:21): operation="profile_replace" pid=1281 name=/usr/bin/evince-thumbnailer [ 36.915233] type=1505 audit(1263713457.420:22): operation="profile_replace" pid=1283 name=/usr/bin/freshclam [ 36.916816] type=1505 audit(1263713457.420:23): operation="profile_replace" pid=1284 name=/usr/lib/cups/backend/cups-pdf [ 36.917519] type=1505 audit(1263713457.424:24): operation="profile_replace" pid=1284 name=/usr/sbin/cupsd [ 36.923167] iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 [ 37.150703] Registered led device: iwl-phy0::radio [ 37.150718] Registered led device: iwl-phy0::assoc [ 37.150732] Registered led device: iwl-phy0::RX [ 37.150747] Registered led device: iwl-phy0::TX [ 37.177763] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 37.178923] tg3 0000:08:00.0: PME# disabled [ 37.179255] alloc irq_desc for 31 on node -1 [ 37.179257] alloc kstat_irqs on node -1 [ 37.179274] tg3 0000:08:00.0: irq 31 for MSI/MSI-X [ 37.325609] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.968899] alloc irq_desc for 32 on node -1 [ 37.968901] alloc kstat_irqs on node -1 [ 37.968913] fglrx_pci 0000:01:00.0: irq 32 for MSI/MSI-X [ 37.969803] [fglrx] Firegl kernel thread PID: 1725 [ 38.461830] [fglrx] Gart USWC size:942 M. [ 38.461833] [fglrx] Gart cacheable size:373 M. [ 38.461837] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 38.461839] [fglrx] Reserved FB block: Unshared offset:fd06000, size:2f5000 [ 38.461841] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 [ 38.882535] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 38.882538] tg3: eth0: Flow control is off for TX and off for RX. [ 38.882683] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 41.155480] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 42.469747] kvm: disabled by bios [ 42.949738] ppdev: user-space parallel port driver [ 49.052018] eth0: no IPv6 routers present [ 50.196143] CE: hpet increasing min_delta_ns to 15000 nsec [ 176.577113] CE: hpet increasing min_delta_ns to 22500 nsec [ 192.092138] CE: hpet increasing min_delta_ns to 33750 nsec [ 192.392193] CE: hpet increasing min_delta_ns to 50624 nsec [ 192.492159] CE: hpet increasing min_delta_ns to 75936 nsec [ 525.697165] CE: hpet increasing min_delta_ns to 113904 nsec [ 5256.756179] __ratelimit: 24 callbacks suppressed [ 5256.756190] hxplay.bin[32174]: segfault at c ip 0044cd1d sp bfc6bf54 error 4 in libpthread-2.10.1.so[445000+15000] [ 5256.937635] hxplay.bin[32190]: segfault at c ip 006ffd1d sp bf859b04 error 4 in libpthread-2.10.1.so[6f8000+15000] [ 5257.084721] hxplay.bin[32198]: segfault at c ip 0074fd1d sp bf848494 error 4 in libpthread-2.10.1.so[748000+15000] [35675.523160] moovida[11337]: segfault at 10 ip 02fb30e0 sp b6a88000 error 4 in libpgmopengl.so[2f9c000+22000]