[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff50000 (usable) [ 0.000000] BIOS-e820: 00000000bff50000 - 00000000bff65000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff65000 - 00000000bff66000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bff66000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xbff50 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bff50000 (usable) [ 0.000000] modified: 00000000bff50000 - 00000000bff65000 (ACPI data) [ 0.000000] modified: 00000000bff65000 - 00000000bff66000 (ACPI NVS) [ 0.000000] modified: 00000000bff66000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 378a6000 - 37fefdb3 [ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff6db3 [ 0.000000] Move RAMDISK from 00000000378a6000 - 0000000037fefdb2 to 008ad000 - 00ff6db2 [ 0.000000] ACPI: RSDP 000f7ca0 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT bff5e2cd 0005C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) [ 0.000000] ACPI: SLIC bff64a4a 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) [ 0.000000] ACPI: FACP bff64bc0 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT bff5e329 066AD (v01 NVIDIA MCP67 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS bff65fc0 00040 [ 0.000000] ACPI: SSDT bff64cb4 00248 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG bff64efc 0003C (v01 Nvidia NVDAACPI 06040000 NVDA 00000000) [ 0.000000] ACPI: HPET bff64f38 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC bff64f70 00068 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT bff64fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2183MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac0ed] BRK ==> [00008a9000 - 00008ac0ed] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0000ff6db3] NEW RAMDISK ==> [00008ad000 - 0000ff6db3] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f7c90] f7c90 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bff50 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bff50 [ 0.000000] On node 0 totalpages: 786154 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3962 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4367 pages used for memmap [ 0.000000] HighMem zone: 554563 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2810000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780011 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=06f4a326-af9e-4bad-a621-8b8e454f8a5c ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15725120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bff50) [ 0.000000] Memory: 3087556k/3145024k available (4565k kernel code, 56256k reserved, 2143k data, 540k init, 2235720k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2200.375 MHz processor. [ 0.000012] spurious 8259A interrupt: IRQ7. [ 0.002123] Console: colour VGA+ 80x25 [ 0.002126] console [tty0] enabled [ 0.002298] hpet clockevent registered [ 0.002301] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.002308] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.75 BogoMIPS (lpj=8801500) [ 0.002330] Security Framework initialized [ 0.002351] AppArmor: AppArmor initialized [ 0.002358] Mount-cache hash table entries: 512 [ 0.002497] Initializing cgroup subsys ns [ 0.002501] Initializing cgroup subsys cpuacct [ 0.002505] Initializing cgroup subsys memory [ 0.002512] Initializing cgroup subsys freezer [ 0.002514] Initializing cgroup subsys net_cls [ 0.002527] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.002530] CPU: L2 Cache: 512K (64 bytes/line) [ 0.002532] CPU: Physical Processor ID: 0 [ 0.002534] CPU: Processor Core ID: 0 [ 0.002537] mce: CPU supports 5 MCE banks [ 0.002547] using C1E aware idle routine [ 0.002555] Performance Counters: AMD PMU driver. [ 0.002561] ... version: 0 [ 0.002563] ... bit width: 48 [ 0.002565] ... generic counters: 4 [ 0.002567] ... value mask: 0000ffffffffffff [ 0.002569] ... max period: 00007fffffffffff [ 0.002571] ... fixed-purpose counters: 0 [ 0.002572] ... counter mask: 000000000000000f [ 0.002576] Checking 'hlt' instruction... OK. [ 0.018100] ACPI: Core revision 20090521 [ 0.028540] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071176] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02 [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4400.61 BogoMIPS (lpj=8801236) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 5 MCE banks [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.156490] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02 [ 0.156516] Brought up 2 CPUs [ 0.156518] Total of 2 processors activated (8801.36 BogoMIPS). [ 0.156515] System has AMD C1E enabled [ 0.156515] Switch to broadcast mode on CPU1 [ 0.156610] CPU0 attaching sched-domain: [ 0.156613] domain 0: span 0-1 level MC [ 0.156616] groups: 0 1 [ 0.156621] CPU1 attaching sched-domain: [ 0.156624] domain 0: span 0-1 level MC [ 0.156626] groups: 1 0 [ 0.156698] Switch to broadcast mode on CPU0 [ 0.156698] Booting paravirtualized kernel on bare hardware [ 0.156698] regulator: core version 0.5 [ 0.156698] Time: 22:12:22 Date: 11/27/09 [ 0.156698] NET: Registered protocol family 16 [ 0.156698] EISA bus registered [ 0.156698] ACPI: bus type pci registered [ 0.156698] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.156698] PCI: MCFG area at e0000000 reserved in E820 [ 0.156698] PCI: Using MMCONFIG for extended config space [ 0.156698] PCI: Using configuration type 1 for base access [ 0.157206] bio: create slab at 0 [ 0.157206] ACPI: EC: Look up EC in DSDT [ 0.162177] ACPI: Interpreter enabled [ 0.162182] ACPI: (supports S0 S3 S4 S5) [ 0.162200] ACPI: Using IOAPIC for interrupt routing [ 0.164024] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.250892] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.250894] ACPI: EC: driver started in interrupt mode [ 0.251160] ACPI: No dock devices found. [ 0.251371] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.251552] pci 0000:00:01.0: reg 10 io port: [0x1d00-0x1dff] [ 0.251591] pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf] [ 0.251601] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f] [ 0.251606] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f] [ 0.251626] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.251631] pci 0000:00:01.1: PME# disabled [ 0.251686] pci 0000:00:01.3: reg 10 32bit mmio: [0xd0600000-0xd067ffff] [ 0.251763] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0886000-0xd0886fff] [ 0.251786] pci 0000:00:02.0: supports D1 D2 [ 0.251788] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.251791] pci 0000:00:02.0: PME# disabled [ 0.251814] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0889000-0xd08890ff] [ 0.251841] pci 0000:00:02.1: supports D1 D2 [ 0.251843] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.251846] pci 0000:00:02.1: PME# disabled [ 0.251872] pci 0000:00:04.0: reg 10 32bit mmio: [0xd0887000-0xd0887fff] [ 0.251894] pci 0000:00:04.0: supports D1 D2 [ 0.251896] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.251900] pci 0000:00:04.0: PME# disabled [ 0.251922] pci 0000:00:04.1: reg 10 32bit mmio: [0xd0889400-0xd08894ff] [ 0.251948] pci 0000:00:04.1: supports D1 D2 [ 0.251951] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.251954] pci 0000:00:04.1: PME# disabled [ 0.251987] pci 0000:00:06.0: reg 20 io port: [0x30c0-0x30cf] [ 0.252032] pci 0000:00:07.0: reg 10 32bit mmio: [0xd0880000-0xd0883fff] [ 0.252059] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.252062] pci 0000:00:07.0: PME# disabled [ 0.252121] pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7] [ 0.252125] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7] [ 0.252129] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef] [ 0.252133] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3] [ 0.252137] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df] [ 0.252141] pci 0000:00:09.0: reg 24 32bit mmio: [0xd0884000-0xd0885fff] [ 0.252186] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd0888000-0xd0888fff] [ 0.252190] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff] [ 0.252195] pci 0000:00:0a.0: reg 18 32bit mmio: [0xd0889c00-0xd0889cff] [ 0.252199] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xd0889800-0xd088980f] [ 0.252221] pci 0000:00:0a.0: supports D1 D2 [ 0.252223] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.252227] pci 0000:00:0a.0: PME# disabled [ 0.252261] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.252264] pci 0000:00:0b.0: PME# disabled [ 0.252295] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.252297] pci 0000:00:0c.0: PME# disabled [ 0.252330] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.252333] pci 0000:00:0d.0: PME# disabled [ 0.252436] pci 0000:01:04.0: reg 10 32bit mmio: [0xd0500000-0xd05007ff] [ 0.252469] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold [ 0.252473] pci 0000:01:04.0: PME# disabled [ 0.252497] pci 0000:01:04.1: reg 10 32bit mmio: [0xd0500800-0xd05008ff] [ 0.252529] pci 0000:01:04.1: supports D1 D2 [ 0.252531] pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.252534] pci 0000:01:04.1: PME# disabled [ 0.252558] pci 0000:01:04.2: reg 10 32bit mmio: [0xd0500c00-0xd0500cff] [ 0.252590] pci 0000:01:04.2: supports D1 D2 [ 0.252593] pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.252596] pci 0000:01:04.2: PME# disabled [ 0.252620] pci 0000:01:04.3: reg 10 32bit mmio: [0xd0501000-0xd05010ff] [ 0.252652] pci 0000:01:04.3: supports D1 D2 [ 0.252655] pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.252658] pci 0000:01:04.3: PME# disabled [ 0.252682] pci 0000:01:04.4: reg 10 32bit mmio: [0xd0501400-0xd05014ff] [ 0.252714] pci 0000:01:04.4: supports D1 D2 [ 0.252716] pci 0000:01:04.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.252720] pci 0000:01:04.4: PME# disabled [ 0.252752] pci 0000:00:08.0: transparent bridge [ 0.252756] pci 0000:00:08.0: bridge 32bit mmio: [0xd0500000-0xd05fffff] [ 0.252783] pci 0000:02:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.252792] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 0.252799] pci 0000:02:00.0: reg 1c 64bit mmio: [0xd2000000-0xd3ffffff] [ 0.252805] pci 0000:02:00.0: reg 24 io port: [0x4000-0x407f] [ 0.252810] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.252864] pci 0000:00:0b.0: bridge io port: [0x4000-0x4fff] [ 0.252867] pci 0000:00:0b.0: bridge 32bit mmio: [0xd1000000-0xd3ffffff] [ 0.252871] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.252906] pci 0000:00:0c.0: bridge io port: [0x5000-0x5fff] [ 0.252909] pci 0000:00:0c.0: bridge 32bit mmio: [0xd0200000-0xd03fffff] [ 0.252913] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xd0000000-0xd01fffff] [ 0.252948] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0400000-0xd040ffff] [ 0.253033] pci 0000:00:0d.0: bridge 32bit mmio: [0xd0400000-0xd04fffff] [ 0.253043] pci_bus 0000:00: on NUMA node 0 [ 0.253047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.253134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.253151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 0.253180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.253208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.277637] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10 [ 0.277806] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11) [ 0.277974] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled. [ 0.278141] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled. [ 0.278308] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.278474] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *10 [ 0.278639] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 0.278806] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 0.278972] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.279140] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11 [ 0.279311] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7 [ 0.279483] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.279650] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.279817] ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *0, disabled. [ 0.279983] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. [ 0.280160] ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5 [ 0.280332] ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10 [ 0.280504] ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11 [ 0.280672] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11 [ 0.280862] SCSI subsystem initialized [ 0.284023] libata version 3.00 loaded. [ 0.284054] usbcore: registered new interface driver usbfs [ 0.284054] usbcore: registered new interface driver hub [ 0.284054] usbcore: registered new device driver usb [ 0.284123] ACPI: WMI: Mapper loaded [ 0.284125] PCI: Using ACPI for IRQ routing [ 0.292009] Bluetooth: Core ver 2.15 [ 0.296013] NET: Registered protocol family 31 [ 0.296015] Bluetooth: HCI device and connection manager initialized [ 0.296018] Bluetooth: HCI socket layer initialized [ 0.296021] NetLabel: Initializing [ 0.296022] NetLabel: domain hash size = 128 [ 0.296024] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.296037] NetLabel: unlabeled traffic allowed by default [ 0.296071] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.296076] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.308023] Switched to high resolution mode on CPU 0 [ 0.308039] Switched to high resolution mode on CPU 1 [ 0.313031] pnp: PnP ACPI init [ 0.313051] ACPI: bus type pnp registered [ 0.353727] pnp: PnP ACPI: found 13 devices [ 0.353729] ACPI: ACPI bus type pnp unregistered [ 0.353732] PnPBIOS: Disabled by ACPI PNP [ 0.353744] system 00:01: ioport range 0x360-0x361 has been reserved [ 0.353748] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.353756] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved [ 0.353762] system 00:0a: ioport range 0x1000-0x107f has been reserved [ 0.353765] system 00:0a: ioport range 0x1080-0x10ff has been reserved [ 0.353768] system 00:0a: ioport range 0x1400-0x147f has been reserved [ 0.353771] system 00:0a: ioport range 0x1480-0x14ff has been reserved [ 0.353774] system 00:0a: ioport range 0x1800-0x187f has been reserved [ 0.353777] system 00:0a: ioport range 0x1880-0x18ff has been reserved [ 0.353783] system 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.353786] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.353789] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.353792] system 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.353796] system 00:0c: iomem range 0xfef00000-0xfef00fff has been reserved [ 0.388457] AppArmor: AppArmor Filesystem Enabled [ 0.388493] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.388495] pci 0000:00:08.0: IO window: disabled [ 0.388500] pci 0000:00:08.0: MEM window: 0xd0500000-0xd05fffff [ 0.388503] pci 0000:00:08.0: PREFETCH window: disabled [ 0.388511] pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff] [ 0.388514] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.388516] pci 0000:00:0b.0: IO window: 0x4000-0x4fff [ 0.388520] pci 0000:00:0b.0: MEM window: 0xd1000000-0xd3ffffff [ 0.388524] pci 0000:00:0b.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.388528] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.388530] pci 0000:00:0c.0: IO window: 0x5000-0x5fff [ 0.388534] pci 0000:00:0c.0: MEM window: 0xd0200000-0xd03fffff [ 0.388537] pci 0000:00:0c.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 0.388541] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05 [ 0.388543] pci 0000:00:0d.0: IO window: disabled [ 0.388546] pci 0000:00:0d.0: MEM window: 0xd0400000-0xd04fffff [ 0.388549] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.388557] pci 0000:00:08.0: setting latency timer to 64 [ 0.388563] pci 0000:00:0b.0: setting latency timer to 64 [ 0.388567] pci 0000:00:0c.0: setting latency timer to 64 [ 0.388572] pci 0000:00:0d.0: setting latency timer to 64 [ 0.388575] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.388578] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.388581] pci_bus 0000:01: resource 1 mem: [0xd0500000-0xd05fffff] [ 0.388584] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.388586] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.388589] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] [ 0.388592] pci_bus 0000:02: resource 1 mem: [0xd1000000-0xd3ffffff] [ 0.388595] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.388598] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff] [ 0.388600] pci_bus 0000:03: resource 1 mem: [0xd0200000-0xd03fffff] [ 0.388603] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xd01fffff] [ 0.388606] pci_bus 0000:05: resource 1 mem: [0xd0400000-0xd04fffff] [ 0.388647] NET: Registered protocol family 2 [ 0.388743] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.389096] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.389915] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.390367] TCP: Hash tables configured (established 131072 bind 65536) [ 0.390370] TCP reno registered [ 0.390472] NET: Registered protocol family 1 [ 0.390544] Trying to unpack rootfs image as initramfs... [ 0.585450] Freeing initrd memory: 7463k freed [ 0.591748] Simple Boot Flag at 0x36 set to 0x1 [ 0.591939] cpufreq-nforce2: No nForce2 chipset. [ 0.591966] Scanning for low memory corruption every 60 seconds [ 0.592080] audit: initializing netlink socket (disabled) [ 0.592095] type=2000 audit(1259359941.589:1): initialized [ 0.600522] highmem bounce pool size: 64 pages [ 0.600527] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.601960] VFS: Disk quotas dquot_6.5.2 [ 0.602019] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.602610] fuse init (API version 7.12) [ 0.602691] msgmni has been set to 1679 [ 0.602957] alg: No test for stdrng (krng) [ 0.602972] io scheduler noop registered [ 0.602974] io scheduler anticipatory registered [ 0.602976] io scheduler deadline registered [ 0.603020] io scheduler cfq registered (default) [ 0.603163] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.603214] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.603271] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.603334] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.603400] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.603470] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.603545] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.603565] pci 0000:02:00.0: Boot video device [ 0.603668] alloc irq_desc for 24 on node -1 [ 0.603670] alloc kstat_irqs on node -1 [ 0.603679] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X [ 0.603685] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 0.603754] alloc irq_desc for 25 on node -1 [ 0.603756] alloc kstat_irqs on node -1 [ 0.603760] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X [ 0.603765] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 0.603832] alloc irq_desc for 26 on node -1 [ 0.603834] alloc kstat_irqs on node -1 [ 0.603838] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X [ 0.603842] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 0.603903] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.603928] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.624184] ACPI: AC Adapter [ACAD] (on-line) [ 0.624250] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.624254] ACPI: Power Button [PWRF] [ 0.624311] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.647287] ACPI: Lid Switch [LID] [ 0.647331] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.647334] ACPI: Sleep Button [SLPB] [ 0.647392] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 0.647395] ACPI: Power Button [PWRB] [ 0.647680] ACPI: processor limited to max C-state 1 [ 0.647720] processor LNXCPU:00: registered as cooling_device0 [ 0.647725] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.647770] processor LNXCPU:01: registered as cooling_device1 [ 0.771381] ACPI: Invalid active0 threshold [ 0.806443] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.806454] ACPI: Thermal Zone [THRM] (64 C) [ 0.806511] isapnp: Scanning for PnP cards... [ 0.901684] ACPI: EC: GPE storm detected, transactions will use polling mode [ 1.159165] isapnp: No Plug & Play device found [ 1.160391] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.161643] brd: module loaded [ 1.162100] loop: module loaded [ 1.162183] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.162258] ahci 0000:00:09.0: version 3.0 [ 1.162572] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 1.162577] alloc irq_desc for 23 on node -1 [ 1.162580] alloc kstat_irqs on node -1 [ 1.162591] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 1.162620] alloc irq_desc for 27 on node -1 [ 1.162622] alloc kstat_irqs on node -1 [ 1.162629] ahci 0000:00:09.0: irq 27 for MSI/MSI-X [ 1.162635] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ [ 1.162706] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.162709] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part [ 1.162713] ahci 0000:00:09.0: setting latency timer to 64 [ 1.163222] scsi0 : ahci [ 1.163366] scsi1 : ahci [ 1.163439] scsi2 : ahci [ 1.163508] scsi3 : ahci [ 1.163613] ata1: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884100 irq 27 [ 1.163616] ata2: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884180 irq 27 [ 1.163620] ata3: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884200 irq 27 [ 1.163623] ata4: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884280 irq 27 [ 1.163871] pata_amd 0000:00:06.0: version 0.4.1 [ 1.163920] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.164010] scsi4 : pata_amd [ 1.164086] scsi5 : pata_amd [ 1.164464] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 1.164467] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 1.165237] Fixed MDIO Bus: probed [ 1.165277] PPP generic driver version 2.4.2 [ 1.165392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.165693] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 1.165697] alloc irq_desc for 22 on node -1 [ 1.165699] alloc kstat_irqs on node -1 [ 1.165708] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 1.165724] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.165728] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.165786] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.165816] ehci_hcd 0000:00:02.1: debug port 1 [ 1.165820] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.165838] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd0889000 [ 1.176029] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.176111] usb usb1: configuration #1 chosen from 1 choice [ 1.176142] hub 1-0:1.0: USB hub found [ 1.176151] hub 1-0:1.0: 6 ports detected [ 1.176477] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 21 [ 1.176480] alloc irq_desc for 21 on node -1 [ 1.176482] alloc kstat_irqs on node -1 [ 1.176490] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 21 (level, low) -> IRQ 21 [ 1.176498] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 1.176501] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 1.176535] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 1.176559] ehci_hcd 0000:00:04.1: debug port 1 [ 1.176563] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 1.176579] ehci_hcd 0000:00:04.1: irq 21, io mem 0xd0889400 [ 1.188026] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 1.188089] usb usb2: configuration #1 chosen from 1 choice [ 1.188116] hub 2-0:1.0: USB hub found [ 1.188124] hub 2-0:1.0: 6 ports detected [ 1.188185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.188471] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20 [ 1.188473] alloc irq_desc for 20 on node -1 [ 1.188475] alloc kstat_irqs on node -1 [ 1.188483] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20 [ 1.188491] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.188493] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.188528] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 1.188555] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd0886000 [ 1.246073] usb usb3: configuration #1 chosen from 1 choice [ 1.246102] hub 3-0:1.0: USB hub found [ 1.246110] hub 3-0:1.0: 6 ports detected [ 1.246427] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 23 [ 1.246431] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 23 (level, low) -> IRQ 23 [ 1.246438] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.246441] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.246478] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 1.246501] ohci_hcd 0000:00:04.0: irq 23, io mem 0xd0887000 [ 1.302066] usb usb4: configuration #1 chosen from 1 choice [ 1.302096] hub 4-0:1.0: USB hub found [ 1.302105] hub 4-0:1.0: 6 ports detected [ 1.302160] uhci_hcd: USB Universal Host Controller Interface driver [ 1.302252] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.339882] ata5.00: ATAPI: PIONEER DVD-RW DVRKD08RS, 1.02, max UDMA/33 [ 1.339906] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13) [ 1.346234] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.346241] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.346326] mice: PS/2 mouse device common for all mice [ 1.346466] rtc_cmos 00:04: RTC can wake from S4 [ 1.346505] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.346546] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.346655] device-mapper: uevent: version 1.0.3 [ 1.348279] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.348383] device-mapper: multipath: version 1.1.0 loaded [ 1.348386] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.348526] EISA: Probing bus 0 at eisa.0 [ 1.348532] Cannot allocate resource for EISA slot 1 [ 1.348536] Cannot allocate resource for EISA slot 3 [ 1.348540] Cannot allocate resource for EISA slot 4 [ 1.348542] Cannot allocate resource for EISA slot 5 [ 1.348551] EISA: Detected 0 cards. [ 1.348628] cpuidle: using governor ladder [ 1.348630] cpuidle: using governor menu [ 1.349119] TCP cubic registered [ 1.349289] NET: Registered protocol family 10 [ 1.349716] lo: Disabled Privacy Extensions [ 1.350010] NET: Registered protocol family 17 [ 1.350029] Bluetooth: L2CAP ver 2.13 [ 1.350030] Bluetooth: L2CAP socket layer initialized [ 1.350033] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.350035] Bluetooth: SCO socket layer initialized [ 1.350064] Bluetooth: RFCOMM TTY layer initialized [ 1.350067] Bluetooth: RFCOMM socket layer initialized [ 1.350069] Bluetooth: RFCOMM ver 1.11 [ 1.350089] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-64 processors (2 cpu cores) (version 2.20.00) [ 1.350136] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x12 [ 1.350139] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x13 [ 1.350141] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x14 [ 1.350144] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0x15 [ 1.350147] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x1e [ 1.350231] Using IPI No-Shortcut mode [ 1.350319] PM: Resume from disk failed. [ 1.350333] registered taskstats version 1 [ 1.350501] Magic number: 1:563:250 [ 1.350626] rtc_cmos 00:04: setting system clock to 2009-11-27 22:12:23 UTC (1259359943) [ 1.350629] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.350631] EDD information not available. [ 1.353274] ata5.00: configured for UDMA/33 [ 1.376037] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.400031] ACPI: EC: missing confirmations, switch off interrupt mode. [ 1.484032] ata4: SATA link down (SStatus 0 SControl 300) [ 1.484050] ata3: SATA link down (SStatus 0 SControl 300) [ 1.484071] ata2: SATA link down (SStatus 0 SControl 300) [ 1.488055] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.548060] ACPI: Battery Slot [BAT1] (battery absent) [ 1.629927] usb 1-3: configuration #1 chosen from 1 choice [ 1.648031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.697727] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133 [ 1.697730] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.698601] ata1.00: configured for UDMA/133 [ 1.698734] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5 [ 1.698867] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.698910] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.698957] sd 0:0:0:0: [sda] Write Protect is off [ 1.698960] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.698983] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.699105] sda: [ 1.705655] scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVRKD08RS 1.02 PQ: 0 ANSI: 5 [ 1.708152] sda1 sda2 sda3 sda4 [ 1.723972] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.723976] Uniform CD-ROM driver Revision: 3.20 [ 1.724076] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.724122] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.724176] ata6: port disabled. ignoring. [ 1.734180] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.734212] Freeing unused kernel memory: 540k freed [ 1.734635] Write protecting the kernel text: 4568k [ 1.734671] Write protecting the kernel read-only data: 1836k [ 1.741203] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.859887] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.860211] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 1.860217] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 1.860222] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.882010] [Firmware Bug]: ACPI(Z00P) defines _DOD but not _DOS [ 1.894098] usb 2-1: configuration #1 chosen from 1 choice [ 1.894284] hub 2-1:1.0: USB hub found [ 1.894372] hub 2-1:1.0: 4 ports detected [ 1.958602] ACPI Warning: _BQC returned an invalid level 20090521 video-629 [ 1.962048] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 [ 1.962062] ohci1394 0000:01:04.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 [ 2.019046] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[d0500000-d05007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.084134] acpi device:12: registered as cooling_device2 [ 2.084239] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0f/device:10/input/input6 [ 2.084278] ACPI: Video Device [Z00P] (multi-head: yes rom: no post: no) [ 2.240041] usb 4-2: new low speed USB device using ohci_hcd and address 2 [ 2.381200] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:38:d7:e6:2d [ 2.381206] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 [ 2.455138] usb 4-2: configuration #1 chosen from 1 choice [ 2.464578] usbcore: registered new interface driver hiddev [ 2.470722] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input7 [ 2.470804] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:04.0-2/input0 [ 2.470822] usbcore: registered new interface driver usbhid [ 2.470826] usbhid: v2.6:USB HID core driver [ 3.336305] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f82c500396f] [ 3.500962] PM: Starting manual resume from disk [ 3.500967] PM: Resume from partition 8:3 [ 3.500969] PM: Checking hibernation image. [ 3.501113] PM: Resume from disk failed. [ 3.504245] EXT4-fs (sda4): INFO: recovery required on readonly filesystem [ 3.504251] EXT4-fs (sda4): write access will be enabled during recovery [ 3.538346] EXT4-fs (sda4): barriers enabled [ 3.579458] kjournald2 starting: pid 437, dev sda4:8, commit interval 5 seconds [ 3.579478] EXT4-fs (sda4): delayed allocation enabled [ 3.579483] EXT4-fs: file extents enabled [ 3.582941] EXT4-fs: mballoc enabled [ 3.582957] EXT4-fs (sda4): recovery complete [ 3.583369] EXT4-fs (sda4): mounted filesystem with ordered data mode [ 4.356607] type=1505 audit(1259359946.505:2): operation="profile_load" pid=460 name=/usr/share/gdm/guest-session/Xsession [ 4.359206] type=1505 audit(1259359946.505:3): operation="profile_load" pid=461 name=/sbin/dhclient3 [ 4.359481] type=1505 audit(1259359946.505:4): operation="profile_load" pid=461 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.359634] type=1505 audit(1259359946.505:5): operation="profile_load" pid=461 name=/usr/lib/connman/scripts/dhclient-script [ 4.421894] type=1505 audit(1259359946.569:6): operation="profile_load" pid=462 name=/usr/bin/evince [ 4.426483] type=1505 audit(1259359946.574:7): operation="profile_load" pid=462 name=/usr/bin/evince-previewer [ 4.429213] type=1505 audit(1259359946.578:8): operation="profile_load" pid=462 name=/usr/bin/evince-thumbnailer [ 5.641568] Adding 1172736k swap on /dev/sda3. Priority:-1 extents:1 across:1172736k [ 7.041071] EXT4-fs (sda4): internal journal on sda4:8 [ 7.209018] udev: starting version 147 [ 7.544912] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 7.544931] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 7.553749] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 7.560917] Linux agpgart interface v0.103 [ 7.580188] ricoh-mmc: Ricoh MMC Controller disabling driver [ 7.580192] ricoh-mmc: Copyright(c) Philip Langdale [ 7.580227] ricoh-mmc: Ricoh MMC controller found at 0000:01:04.2 [1180:0843] (rev 12) [ 7.580242] ricoh-mmc: Controller is now disabled. [ 7.598015] sdhci: Secure Digital Host Controller Interface driver [ 7.598019] sdhci: Copyright(c) Pierre Ossman [ 7.641434] acer-wmi: Acer Laptop ACPI-WMI Extras [ 7.665962] lp: driver loaded but no devices found [ 7.704170] cfg80211: Calling CRDA to update world regulatory domain [ 7.761147] acer-wmi: Brightness must be controlled by generic video driver [ 7.859052] sdhci-pci 0000:01:04.1: SDHCI controller found [1180:0822] (rev 22) [ 7.859411] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 [ 7.859417] sdhci-pci 0000:01:04.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 7.861470] Registered led device: mmc0:: [ 7.862500] mmc0: SDHCI controller on PCI [0000:01:04.1] using PIO [ 8.090100] Linux video capture interface: v2.00 [ 8.281359] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.016746] lirc_dev: IR Remote Control driver registered, major 61 [ 9.017365] lirc_dev: lirc_register_driver: sample_rate: 0 [ 9.017471] enecir: KB3926B detected [ 9.017473] enecir: chip is 0x3909 - 0x24, 0xc0 [ 9.017475] enecir: driver has been succesfully loaded [ 9.022292] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101) [ 9.026846] input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input8 [ 9.026899] usbcore: registered new interface driver uvcvideo [ 9.026902] USB Video Class driver (v0.1.0) [ 9.201920] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9 [ 9.243224] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10 [ 9.934542] cfg80211: World regulatory domain updated: [ 9.934546] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.934550] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.934553] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.934556] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.934559] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.934561] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.507639] nvidia: module license 'NVIDIA' taints kernel. [ 10.507644] Disabling lock debugging due to kernel taint [ 10.686024] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 10.686030] alloc irq_desc for 19 on node -1 [ 10.686033] alloc kstat_irqs on node -1 [ 10.686044] ath5k 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 10.686052] ath5k 0000:05:00.0: setting latency timer to 64 [ 10.686094] ath5k 0000:05:00.0: registered as 'phy0' [ 10.762894] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 17 [ 10.762901] alloc irq_desc for 17 on node -1 [ 10.762904] alloc kstat_irqs on node -1 [ 10.762915] nvidia 0000:02:00.0: PCI INT A -> Link[LK2E] -> GSI 17 (level, low) -> IRQ 17 [ 10.762924] nvidia 0000:02:00.0: setting latency timer to 64 [ 10.763317] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 10.781546] ath: EEPROM regdomain: 0x65 [ 10.781549] ath: EEPROM indicates we should expect a direct regpair map [ 10.781554] ath: Country alpha2 being used: 00 [ 10.781556] ath: Regpair used: 0x65 [ 10.988879] phy0: Selected rate control algorithm 'minstrel' [ 10.989601] Registered led device: ath5k-phy0::rx [ 10.989620] Registered led device: ath5k-phy0::tx [ 10.989624] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 11.249588] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 11.249595] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 11.249624] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 11.686914] __ratelimit: 9 callbacks suppressed [ 11.686919] type=1505 audit(1259356353.834:12): operation="profile_replace" pid=916 name=/usr/share/gdm/guest-session/Xsession [ 11.688684] type=1505 audit(1259356353.834:13): operation="profile_replace" pid=917 name=/sbin/dhclient3 [ 11.688960] type=1505 audit(1259356353.834:14): operation="profile_replace" pid=917 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 11.689115] type=1505 audit(1259356353.838:15): operation="profile_replace" pid=917 name=/usr/lib/connman/scripts/dhclient-script [ 11.693768] type=1505 audit(1259356353.842:16): operation="profile_replace" pid=918 name=/usr/bin/evince [ 11.698475] type=1505 audit(1259356353.846:17): operation="profile_replace" pid=918 name=/usr/bin/evince-previewer [ 11.701391] type=1505 audit(1259356353.850:18): operation="profile_replace" pid=918 name=/usr/bin/evince-thumbnailer [ 11.706737] type=1505 audit(1259356353.854:19): operation="profile_replace" pid=920 name=/usr/lib/cups/backend/cups-pdf [ 11.707078] type=1505 audit(1259356353.854:20): operation="profile_replace" pid=920 name=/usr/sbin/cupsd [ 11.709057] type=1505 audit(1259356353.858:21): operation="profile_replace" pid=921 name=/usr/sbin/tcpdump [ 11.814195] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input11 [ 15.798764] /dev/vmmon[1124]: Module vmmon: registered with major=10 minor=165 [ 15.798782] /dev/vmmon[1124]: Initial HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0 [ 15.798788] /dev/vmmon[1124]: HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0 [ 15.798791] /dev/vmmon[1124]: Module vmmon: initialized [ 15.873836] /dev/vmci[1132]: VMCI: Driver initialized. [ 15.873899] /dev/vmci[1132]: Module vmci: registered with major=10 minor=55 [ 15.873902] /dev/vmci[1132]: Module vmci: initialized [ 15.887373] alloc irq_desc for 28 on node -1 [ 15.887378] alloc kstat_irqs on node -1 [ 15.887389] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X [ 15.887591] eth0: no link during initialization. [ 15.888095] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.053486] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.067961] ppdev: user-space parallel port driver [ 18.494245] /dev/vmnet: open called by PID 1295 (vmnet-dhcpd) [ 18.494257] /dev/vmnet: hub 1 does not exist, allocating memory. [ 18.494282] /dev/vmnet: port on hub 1 successfully opened [ 18.621326] /dev/vmnet: open called by PID 1297 (vmnet-netifup) [ 18.621341] /dev/vmnet: port on hub 1 successfully opened [ 19.938997] /dev/vmnet: open called by PID 1300 (vmnet-dhcpd) [ 19.939009] /dev/vmnet: hub 8 does not exist, allocating memory. [ 19.939037] /dev/vmnet: port on hub 8 successfully opened [ 20.299601] /dev/vmnet: open called by PID 1305 (vmnet-natd) [ 20.299617] /dev/vmnet: port on hub 8 successfully opened [ 20.311731] /dev/vmnet: open called by PID 1307 (vmnet-netifup) [ 20.311747] /dev/vmnet: port on hub 8 successfully opened [ 23.223903] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 23.223907] vboxdrv: Successfully done. [ 23.223909] vboxdrv: Found 2 processor cores. [ 23.223988] vboxdrv: fAsync=1 offMin=0xf2516 offMax=0xf2516 [ 23.224054] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 23.224056] vboxdrv: Successfully loaded version 3.0.8_OSE (interface 0x000e0000). [ 29.452014] vmnet1: no IPv6 routers present [ 31.156031] vmnet8: no IPv6 routers present [ 70.661510] usb 2-1.1: new full speed USB device using ehci_hcd and address 4 [ 70.754474] usb 2-1.1: configuration #1 chosen from 1 choice [ 70.953370] Initializing USB Mass Storage driver... [ 70.953818] scsi6 : SCSI emulation for USB Mass Storage devices [ 70.954268] usb-storage: device found at 4 [ 70.954272] usb-storage: waiting for device to settle before scanning [ 70.954279] usbcore: registered new interface driver usb-storage [ 70.954283] USB Mass Storage support registered. [ 75.952320] usb-storage: device scan complete [ 75.954898] scsi 6:0:0:0: CD-ROM ONDA USB Storage 2.31 PQ: 0 ANSI: 2 [ 76.051895] sr1: scsi-1 drive [ 76.052040] sr 6:0:0:0: Attached scsi CD-ROM sr1 [ 76.052113] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 90.500040] Clocksource tsc unstable (delta = -317925415 ns) [ 95.264528] usb 2-1: clear tt 1 (9047) error -32 [ 95.282508] usb 2-1.1: USB disconnect, address 4 [ 96.621645] usb 2-1.1: new full speed USB device using ehci_hcd and address 5 [ 96.714634] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 96.714645] usb 2-1.1: config 1 has no interface number 0 [ 96.716300] usb 2-1.1: configuration #1 chosen from 1 choice [ 96.785155] usbcore: registered new interface driver usbserial [ 96.785198] USB Serial support registered for generic [ 96.785310] usbcore: registered new interface driver usbserial_generic [ 96.785316] usbserial: USB Serial Driver core [ 96.800693] USB Serial support registered for GSM modem (1-port) [ 96.800844] option 2-1.1:1.1: GSM modem (1-port) converter detected [ 96.804844] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB0 [ 96.804909] option 2-1.1:1.2: GSM modem (1-port) converter detected [ 96.805171] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB1 [ 96.805211] option 2-1.1:1.3: GSM modem (1-port) converter detected [ 96.805337] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB2 [ 96.805376] option 2-1.1:1.4: GSM modem (1-port) converter detected [ 96.805501] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB3 [ 96.805549] usbcore: registered new interface driver option [ 96.805555] option: v0.7.2:USB Driver for GSM modems [ 736.638236] PPP BSD Compression module registered [ 736.656395] PPP Deflate Compression module registered [ 772.021010] CE: hpet increasing min_delta_ns to 15000 nsec [ 898.167364] option: option_instat_callback: error -32 [ 898.183357] option: option_instat_callback: error -32 [ 898.199366] option: option_instat_callback: error -32 [ 898.214862] usb 2-1.1: USB disconnect, address 5 [ 898.214872] option: option_instat_callback: error -108 [ 898.214881] option: option_instat_callback: error -108 [ 898.215113] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 898.215135] option 2-1.1:1.1: device disconnected [ 898.215285] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 898.215304] option 2-1.1:1.2: device disconnected [ 898.215428] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 898.215445] option 2-1.1:1.3: device disconnected [ 898.215571] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 898.215590] option 2-1.1:1.4: device disconnected [ 910.001029] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 910.213302] usb 3-1: configuration #1 chosen from 1 choice [ 910.216218] scsi7 : SCSI emulation for USB Mass Storage devices [ 910.216356] usb-storage: device found at 2 [ 910.216358] usb-storage: waiting for device to settle before scanning [ 915.219076] usb-storage: device scan complete [ 915.226070] scsi 7:0:0:0: CD-ROM ONDA USB Storage 2.31 PQ: 0 ANSI: 2 [ 915.248058] sr1: scsi-1 drive [ 915.248203] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 915.248278] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 915.392032] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 915.392047] sr: Sense Key : No Sense [current] [ 915.392051] sr: Add. Sense: No additional sense information [ 915.704032] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 915.704047] sr: Sense Key : No Sense [current] [ 915.704051] sr: Add. Sense: No additional sense information [ 915.888061] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 915.888076] sr: Sense Key : No Sense [current] [ 915.888080] sr: Add. Sense: No additional sense information [ 916.198083] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 916.198097] sr: Sense Key : No Sense [current] [ 916.198101] sr: Add. Sense: No additional sense information [ 916.338065] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 916.338079] sr: Sense Key : No Sense [current] [ 916.338083] sr: Add. Sense: No additional sense information [ 977.164061] usb 3-1: reset full speed USB device using ohci_hcd and address 2 [ 977.394100] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 28 00 00 00 00 10 00 [ 977.394136] sr: Sense Key : No Sense [current] [ 977.394148] sr: Add. Sense: No additional sense information [ 977.411073] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 20 00 00 00 00 18 00 [ 977.411097] sr: Sense Key : No Sense [current] [ 977.411105] sr: Add. Sense: No additional sense information [ 977.458101] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 977.458133] sr: Sense Key : No Sense [current] [ 977.458142] sr: Add. Sense: No additional sense information [ 977.482089] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 977.521104] ISOFS: changing to secondary root [ 977.572070] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 977.572106] sr: Sense Key : No Sense [current] [ 977.572117] sr: Add. Sense: No additional sense information [ 977.654065] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 977.654113] sr: Sense Key : No Sense [current] [ 977.654123] sr: Add. Sense: No additional sense information [ 979.981174] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 979.981212] sr: Sense Key : No Sense [current] [ 979.981223] sr: Add. Sense: No additional sense information [ 1041.164058] usb 3-1: reset full speed USB device using ohci_hcd and address 2 [ 1113.696051] usb 3-1: USB disconnect, address 2 [ 1113.722288] scsi 7:0:0:0: rejecting I/O to dead device [ 1121.845079] usb 3-1: new full speed USB device using ohci_hcd and address 3 [ 1122.056512] usb 3-1: configuration #1 chosen from 1 choice [ 1122.059517] scsi8 : SCSI emulation for USB Mass Storage devices [ 1122.059838] usb-storage: device found at 3 [ 1122.059843] usb-storage: waiting for device to settle before scanning [ 1127.058371] usb-storage: device scan complete [ 1127.065342] scsi 8:0:0:0: CD-ROM ONDA USB Storage 2.31 PQ: 0 ANSI: 2 [ 1127.091290] sr1: scsi-1 drive [ 1127.091623] sr 8:0:0:0: Attached scsi CD-ROM sr1 [ 1127.091822] sr 8:0:0:0: Attached scsi generic sg2 type 5 [ 1127.214297] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1127.214332] sr: Sense Key : No Sense [current] [ 1127.214344] sr: Add. Sense: No additional sense information [ 1127.520299] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1127.520335] sr: Sense Key : No Sense [current] [ 1127.520348] sr: Add. Sense: No additional sense information [ 1127.790289] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1127.790324] sr: Sense Key : No Sense [current] [ 1127.790335] sr: Add. Sense: No additional sense information [ 1127.920298] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1127.920332] sr: Sense Key : No Sense [current] [ 1127.920344] sr: Add. Sense: No additional sense information [ 1127.944293] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 28 00 00 00 00 10 00 [ 1127.944317] sr: Sense Key : No Sense [current] [ 1127.944327] sr: Add. Sense: No additional sense information [ 1127.978288] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 20 00 00 00 00 18 00 [ 1127.978310] sr: Sense Key : No Sense [current] [ 1127.978319] sr: Add. Sense: No additional sense information [ 1160.516672] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1188.164057] usb 3-1: reset full speed USB device using ohci_hcd and address 3 [ 1188.423298] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1188.423333] sr: Sense Key : No Sense [current] [ 1188.423345] sr: Add. Sense: No additional sense information [ 1188.448295] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 1188.460329] ISOFS: changing to secondary root [ 1188.510291] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1188.510324] sr: Sense Key : No Sense [current] [ 1188.510333] sr: Add. Sense: No additional sense information [ 1188.793304] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1188.793339] sr: Sense Key : No Sense [current] [ 1188.793350] sr: Add. Sense: No additional sense information [ 1189.055267] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1189.055281] sr: Sense Key : No Sense [current] [ 1189.055285] sr: Add. Sense: No additional sense information [ 1189.179275] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1189.179312] sr: Sense Key : No Sense [current] [ 1189.179323] sr: Add. Sense: No additional sense information [ 1223.178436] usb 3-1: USB disconnect, address 3 [ 1223.179657] VFS: busy inodes on changed media or resized disk sr1 [ 1223.179996] VFS: busy inodes on changed media or resized disk sr1 [ 1223.192843] scsi 8:0:0:0: rejecting I/O to dead device [ 1235.488045] usb 3-2: new full speed USB device using ohci_hcd and address 4 [ 1235.700333] usb 3-2: configuration #1 chosen from 1 choice [ 1235.707453] scsi9 : SCSI emulation for USB Mass Storage devices [ 1235.707807] usb-storage: device found at 4 [ 1235.707813] usb-storage: waiting for device to settle before scanning [ 1240.705222] usb-storage: device scan complete [ 1240.712175] scsi 9:0:0:0: CD-ROM ONDA USB Storage 2.31 PQ: 0 ANSI: 2 [ 1240.736145] sr1: scsi-1 drive [ 1240.736487] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 1240.736674] sr 9:0:0:0: Attached scsi generic sg2 type 5 [ 1240.861133] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1240.861167] sr: Sense Key : No Sense [current] [ 1240.861179] sr: Add. Sense: No additional sense information [ 1241.166113] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1241.166148] sr: Sense Key : No Sense [current] [ 1241.166159] sr: Add. Sense: No additional sense information [ 1241.401121] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1241.401156] sr: Sense Key : No Sense [current] [ 1241.401168] sr: Add. Sense: No additional sense information [ 1241.696124] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1241.696157] sr: Sense Key : No Sense [current] [ 1241.696168] sr: Add. Sense: No additional sense information [ 1241.802125] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1241.802157] sr: Sense Key : No Sense [current] [ 1241.802168] sr: Add. Sense: No additional sense information [ 1302.177045] usb 3-2: reset full speed USB device using ohci_hcd and address 4 [ 1302.405141] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 28 00 00 00 00 10 00 [ 1302.405177] sr: Sense Key : No Sense [current] [ 1302.405188] sr: Add. Sense: No additional sense information [ 1302.422124] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 20 00 00 00 00 18 00 [ 1302.422150] sr: Sense Key : No Sense [current] [ 1302.422158] sr: Add. Sense: No additional sense information [ 1302.469140] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1302.469172] sr: Sense Key : No Sense [current] [ 1302.469181] sr: Add. Sense: No additional sense information [ 1302.496132] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 1302.508451] ISOFS: changing to secondary root [ 1302.575124] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1302.575159] sr: Sense Key : No Sense [current] [ 1302.575170] sr: Add. Sense: No additional sense information [ 1302.657906] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1302.657942] sr: Sense Key : No Sense [current] [ 1302.657954] sr: Add. Sense: No additional sense information [ 1305.123097] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1305.123112] sr: Sense Key : No Sense [current] [ 1305.123116] sr: Add. Sense: No additional sense information [ 1366.165077] usb 3-2: reset full speed USB device using ohci_hcd and address 4 [ 1395.113143] usb 3-2: USB disconnect, address 4 [ 1395.141316] scsi 9:0:0:0: rejecting I/O to dead device [ 1402.437031] usb 2-1.1: new full speed USB device using ehci_hcd and address 6 [ 1402.530604] usb 2-1.1: configuration #1 chosen from 1 choice [ 1402.532239] scsi10 : SCSI emulation for USB Mass Storage devices [ 1402.532578] usb-storage: device found at 6 [ 1402.532584] usb-storage: waiting for device to settle before scanning [ 1407.535719] usb-storage: device scan complete [ 1407.545869] scsi 10:0:0:0: CD-ROM ONDA USB Storage 2.31 PQ: 0 ANSI: 2 [ 1407.555118] sr1: scsi-1 drive [ 1407.555262] sr 10:0:0:0: Attached scsi CD-ROM sr1 [ 1407.555359] sr 10:0:0:0: Attached scsi generic sg2 type 5 [ 1427.063606] usb 2-1.1: USB disconnect, address 6 [ 1427.225516] usb 2-1: clear tt 1 (9067) error -32 [ 1428.285024] usb 2-1.1: new full speed USB device using ehci_hcd and address 7 [ 1428.377734] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 1428.377743] usb 2-1.1: config 1 has no interface number 0 [ 1428.379461] usb 2-1.1: configuration #1 chosen from 1 choice [ 1428.381977] option 2-1.1:1.1: GSM modem (1-port) converter detected [ 1428.382189] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB0 [ 1428.382700] option 2-1.1:1.2: GSM modem (1-port) converter detected [ 1428.382854] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB1 [ 1428.389706] option 2-1.1:1.3: GSM modem (1-port) converter detected [ 1428.389924] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB2 [ 1428.391158] option 2-1.1:1.4: GSM modem (1-port) converter detected [ 1428.391316] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB3 [ 3825.284987] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 3825.284993] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance [ 3825.284995] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 3825.284997] vboxdrv: the usage of hardware performance counters by [ 3825.284999] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 3825.285005] vboxdrv: Found 2 processor cores. [ 3825.285100] vboxdrv: fAsync=1 offMin=0x5f1a6 offMax=0x5f1a6 [ 3825.285165] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 3825.285168] vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000). [ 4525.722300] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 4525.725279] SGI XFS Quota Management subsystem [ 4525.732260] JFS: nTxBlock = 8192, nTxLock = 65536 [ 4525.778129] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 4525.801771] QNX4 filesystem 0.2.3 registered.