[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037ff0000 (usable) [ 0.000000] BIOS-e820: 0000000037ff0000 - 0000000037ff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037ff3000 - 0000000038000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x37ff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF0000000 write-back [ 0.000000] 2 base 030000000 mask FF8000000 write-back [ 0.000000] 3 base 0D0000000 mask FFC000000 write-combining [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000037ff0000 (usable) [ 0.000000] modified: 0000000037ff0000 - 0000000037ff3000 (ACPI NVS) [ 0.000000] modified: 0000000037ff3000 - 0000000038000000 (ACPI data) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2989a000 - 2a03342d [ 0.000000] ACPI: RSDP 000f7c50 00014 (v00 QDIGRP) [ 0.000000] ACPI: RSDT 37ff3000 00028 (v01 QDIGRP AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 37ff3040 00074 (v01 QDIGRP AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 37ff30c0 0239E (v01 QDIGRP AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 37ff0000 00040 [ 0.000000] 7MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [002989a000 - 002a03342d] RAMDISK ==> [002989a000 - 002a03342d] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008dc000 - 00008df0a2] BRK ==> [00008dc000 - 00008df0a2] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x00037ff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00037ff0 [ 0.000000] On node 0 totalpages: 229259 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 16 pages used for memmap [ 0.000000] HighMem zone: 2018 pages, LIFO batch:0 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 38000000 (gap: 38000000:c7ff0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227467 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=1ae6115d-3add-4ed0-b619-8411ed6894fa ro single [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4587200 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:00037ff0) [ 0.000000] Memory: 888212k/917440k available (4679k kernel code, 28396k reserved, 2116k data, 660k init, 8136k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 864.464 MHz processor. [ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1728.92 BogoMIPS (lpj=3457856) [ 0.008173] Security Framework initialized [ 0.008305] AppArmor: AppArmor initialized [ 0.008383] Mount-cache hash table entries: 512 [ 0.008778] Initializing cgroup subsys ns [ 0.008847] Initializing cgroup subsys cpuacct [ 0.008914] Initializing cgroup subsys memory [ 0.008995] Initializing cgroup subsys devices [ 0.009058] Initializing cgroup subsys freezer [ 0.009120] Initializing cgroup subsys net_cls [ 0.012035] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.012132] CPU: L2 cache: 256K [ 0.012197] mce: CPU supports 5 MCE banks [ 0.012289] Performance Events: [ 0.012336] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.012447] no hardware sampling interrupt available. [ 0.012508] p6 PMU driver. [ 0.012575] ... version: 0 [ 0.012633] ... bit width: 32 [ 0.012693] ... generic registers: 2 [ 0.012752] ... value mask: 00000000ffffffff [ 0.012814] ... max period: 000000007fffffff [ 0.012876] ... fixed-purpose events: 0 [ 0.012936] ... event mask: 0000000000000003 [ 0.013004] Checking 'hlt' instruction... OK. [ 0.029423] SMP alternatives: switching to UP code [ 0.043854] Freeing SMP alternatives: 19k freed [ 0.043973] ACPI: Core revision 20090903 [ 0.049793] ACPI: setting ELCR to 0800 (from 0820) [ 0.052162] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.052234] ftrace: allocating 21780 entries in 43 pages [ 0.056313] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.056402] weird, boot CPU (#0) not listed by the BIOS. [ 0.056464] SMP motherboard not detected. [ 0.056523] Local APIC not detected. Using dummy APIC emulation. [ 0.056584] SMP disabled [ 0.057164] Brought up 1 CPUs [ 0.057248] Total of 1 processors activated (1728.92 BogoMIPS). [ 0.058181] CPU0 attaching NULL sched-domain. [ 0.058579] devtmpfs: initialized [ 0.060721] regulator: core version 0.5 [ 0.060827] Time: 16:51:59 Date: 04/19/14 [ 0.061033] NET: Registered protocol family 16 [ 0.061428] EISA bus registered [ 0.061515] ACPI: bus type pci registered [ 0.092859] PCI: PCI BIOS revision 2.10 entry at 0xfb060, last bus=1 [ 0.092924] PCI: Using configuration type 1 for base access [ 0.095867] bio: create slab at 0 [ 0.097000] ACPI: EC: Look up EC in DSDT [ 0.105209] ACPI: Interpreter enabled [ 0.105304] ACPI: (supports S0 S1 S4 S5) [ 0.105556] ACPI: Using PIC for interrupt routing [ 0.114269] ACPI: No dock devices found. [ 0.114561] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.114727] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd3ffffff] [ 0.114829] pci 0000:00:01.0: supports D1 [ 0.114961] pci 0000:00:07.1: reg 20 io port: [0xa000-0xa00f] [ 0.115042] pci 0000:00:07.2: reg 20 io port: [0xa400-0xa41f] [ 0.115120] pci 0000:00:07.3: reg 20 io port: [0xa800-0xa81f] [ 0.115216] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon [ 0.115299] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB [ 0.115413] pci 0000:00:08.0: reg 10 32bit mmio: [0xd6800000-0xd680ffff] [ 0.115426] pci 0000:00:08.0: reg 14 io port: [0xbc00-0xbc07] [ 0.115467] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 0.115533] pci 0000:00:08.0: PME# disabled [ 0.115618] pci 0000:00:0a.0: reg 10 io port: [0xc000-0xc0ff] [ 0.115631] pci 0000:00:0a.0: reg 14 32bit mmio: [0xd6810000-0xd68100ff] [ 0.115732] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd6000000-0xd67fffff] [ 0.115745] pci 0000:01:00.0: reg 14 32bit mmio: [0xd5000000-0xd500ffff] [ 0.115757] pci 0000:01:00.0: reg 18 io port: [0x9000-0x907f] [ 0.115780] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.115805] pci 0000:01:00.0: supports D2 [ 0.115852] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.115861] pci 0000:00:01.0: bridge 32bit mmio: [0xd4000000-0xd5ffffff] [ 0.115872] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd6000000-0xd67fffff] [ 0.115886] pci_bus 0000:00: on NUMA node 0 [ 0.115898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.147334] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.148194] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.149169] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.150073] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.150901] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.150983] vgaarb: loaded [ 0.151405] SCSI subsystem initialized [ 0.151675] libata version 3.00 loaded. [ 0.151921] usbcore: registered new interface driver usbfs [ 0.152052] usbcore: registered new interface driver hub [ 0.152201] usbcore: registered new device driver usb [ 0.153305] ACPI: WMI: Mapper loaded [ 0.153364] PCI: Using ACPI for IRQ routing [ 0.153742] NetLabel: Initializing [ 0.153800] NetLabel: domain hash size = 128 [ 0.153859] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.153950] NetLabel: unlabeled traffic allowed by default [ 0.154130] Switching to clocksource tsc [ 0.157645] AppArmor: AppArmor Filesystem Enabled [ 0.157856] pnp: PnP ACPI init [ 0.157991] ACPI: bus type pnp registered [ 0.164891] pnp: PnP ACPI: found 13 devices [ 0.164959] ACPI: ACPI bus type pnp unregistered [ 0.165024] PnPBIOS: Disabled by ACPI PNP [ 0.165111] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved [ 0.165179] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved [ 0.165245] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.165310] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.165377] system 00:00: iomem range 0x37ff0000-0x37ffffff could not be reserved [ 0.165457] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.165522] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.165588] system 00:00: iomem range 0x100000-0x37feffff could not be reserved [ 0.165697] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.165779] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.200967] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.201035] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.201101] pci 0000:00:01.0: MEM window: 0xd4000000-0xd5ffffff [ 0.201167] pci 0000:00:01.0: PREFETCH window: 0xd6000000-0xd67fffff [ 0.201249] pci 0000:00:01.0: setting latency timer to 64 [ 0.201263] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.201271] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.201280] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.201288] pci_bus 0000:01: resource 1 mem: [0xd4000000-0xd5ffffff] [ 0.201296] pci_bus 0000:01: resource 2 pref mem [0xd6000000-0xd67fffff] [ 0.201408] NET: Registered protocol family 2 [ 0.201810] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.203010] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.209098] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.212316] TCP: Hash tables configured (established 131072 bind 65536) [ 0.212399] TCP reno registered [ 0.212857] NET: Registered protocol family 1 [ 0.212994] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.213063] pci 0000:00:07.0: Disabling VIA external APIC routing [ 0.213182] pci 0000:01:00.0: Boot video device [ 0.213751] cpufreq-nforce2: No nForce2 chipset. [ 0.213903] Scanning for low memory corruption every 60 seconds [ 0.214418] audit: initializing netlink socket (disabled) [ 0.214510] type=2000 audit(1397926319.213:1): initialized [ 0.239790] Trying to unpack rootfs image as initramfs... [ 0.266315] highmem bounce pool size: 64 pages [ 0.266401] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.278455] VFS: Disk quotas dquot_6.5.2 [ 0.278846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.286763] fuse init (API version 7.13) [ 0.287254] msgmni has been set to 1719 [ 0.288133] alg: No test for stdrng (krng) [ 0.288346] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.288427] io scheduler noop registered [ 0.288485] io scheduler anticipatory registered [ 0.288545] io scheduler deadline registered [ 0.288759] io scheduler cfq registered (default) [ 0.289098] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.289225] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.289551] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.289637] ACPI: Power Button [PWRB] [ 0.289889] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.289969] ACPI: Power Button [PWRF] [ 0.290549] Marking TSC unstable due to TSC halts in idle [ 0.290830] processor LNXCPU:00: registered as cooling_device0 [ 0.298169] Switching to clocksource acpi_pm [ 0.304291] isapnp: Scanning for PnP cards... [ 0.317329] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.317614] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.317867] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.318722] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.319068] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.402713] brd: module loaded [ 0.409578] loop: module loaded [ 0.410007] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.411688] Fixed MDIO Bus: probed [ 0.411865] PPP generic driver version 2.4.2 [ 0.412216] tun: Universal TUN/TAP device driver, 1.6 [ 0.412278] tun: (C) 1999-2004 Max Krasnyansky [ 0.412602] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.412717] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.412813] uhci_hcd: USB Universal Host Controller Interface driver [ 0.414096] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.414162] PCI: setting IRQ 11 as level-triggered [ 0.414173] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.414266] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 0.414482] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 0.414600] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000a400 [ 0.414965] usb usb1: configuration #1 chosen from 1 choice [ 0.415107] hub 1-0:1.0: USB hub found [ 0.415185] hub 1-0:1.0: 2 ports detected [ 0.415377] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.415468] uhci_hcd 0000:00:07.3: UHCI Host Controller [ 0.415641] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 [ 0.415750] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000a800 [ 0.420315] usb usb2: configuration #1 chosen from 1 choice [ 0.420499] hub 2-0:1.0: USB hub found [ 0.420588] hub 2-0:1.0: 2 ports detected [ 0.420954] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.424800] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.424906] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.425497] mice: PS/2 mouse device common for all mice [ 0.426087] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.426191] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.426618] device-mapper: uevent: version 1.0.3 [ 0.431435] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.431842] device-mapper: multipath: version 1.1.0 loaded [ 0.431911] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.432505] EISA: Probing bus 0 at eisa.0 [ 0.432598] Cannot allocate resource for EISA slot 4 [ 0.432659] Cannot allocate resource for EISA slot 5 [ 0.432744] Cannot allocate resource for EISA slot 6 [ 0.432817] EISA: Detected 0 cards. [ 0.436443] cpuidle: using governor ladder [ 0.436640] cpuidle: using governor menu [ 0.438333] TCP cubic registered [ 0.438932] NET: Registered protocol family 10 [ 0.440566] lo: Disabled Privacy Extensions [ 0.444970] NET: Registered protocol family 17 [ 0.445251] Using IPI No-Shortcut mode [ 0.445633] PM: Resume from disk failed. [ 0.445756] registered taskstats version 1 [ 0.446222] Magic number: 10:451:894 [ 0.446473] rtc_cmos 00:04: setting system clock to 2014-04-19 16:51:59 UTC (1397926319) [ 0.446557] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.446619] EDD information not available. [ 0.454502] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.542047] 01:01: card 'ESS ES1869 Plug and Play AudioDrive' [ 0.542125] isapnp: 1 Plug & Play card detected total [ 0.724180] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 0.897112] usb 1-2: configuration #1 chosen from 1 choice [ 0.998764] Freeing initrd memory: 7781k freed [ 1.020420] Freeing unused kernel memory: 660k freed [ 1.022476] Write protecting the kernel text: 4680k [ 1.022650] Write protecting the kernel read-only data: 1840k [ 1.083453] udev: starting version 151 [ 1.513137] Floppy drive(s): fd0 is 1.44M [ 1.532005] FDC 0 is a post-1991 82077 [ 1.555928] pata_via 0000:00:07.1: version 0.3.4 [ 1.564482] scsi0 : pata_via [ 1.571272] scsi1 : pata_via [ 1.571664] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xa000 irq 14 [ 1.571736] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xa008 irq 15 [ 1.614027] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.614155] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.753410] ata1.00: ATA-6: WDC WD800EB-11DJF0, 77.07W77, max UDMA/100 [ 1.753484] ata1.00: 156301488 sectors, multi 16: LBA48 [ 1.753635] ata1.01: ATA-3: FUJITSU MPB3032ATU, 2201, max UDMA/33 [ 1.753700] ata1.01: 6306048 sectors, multi 16: LBA [ 1.769436] ata1.00: configured for UDMA/100 [ 1.784429] ata1.01: configured for UDMA/33 [ 1.809448] ata1.00: configured for UDMA/100 [ 1.824429] ata1.01: configured for UDMA/33 [ 1.824493] ata1: EH complete [ 1.824896] scsi 0:0:0:0: Direct-Access ATA WDC WD800EB-11DJ 77.0 PQ: 0 ANSI: 5 [ 1.826099] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.826676] scsi 0:0:1:0: Direct-Access ATA FUJITSU MPB3032A 2201 PQ: 0 ANSI: 5 [ 1.827608] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.828255] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.828486] sd 0:0:0:0: [sda] Write Protect is off [ 1.829233] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.829313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.829706] sd 0:0:1:0: [sdb] 6306048 512-byte logical blocks: (3.22 GB/3.00 GiB) [ 1.830105] sd 0:0:1:0: [sdb] Write Protect is off [ 1.830167] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.830281] sda: [ 1.839155] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1.839267] ata1.00: BMDMA stat 0x64 [ 1.839329] ata1.00: failed command: READ DMA [ 1.839402] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 1.839406] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 1.839559] ata1.00: status: { DRDY ERR } [ 1.839618] ata1.00: error: { ICRC ABRT } [ 1.839721] ata1: soft resetting link [ 2.000835] ata2.00: native sectors (19541087) is smaller than sectors (19541088) [ 2.000923] ata2.00: ATA-4: ST310211A, 3.39, max UDMA/100 [ 2.000987] ata2.00: 19541088 sectors, multi 16: LBA [ 2.001158] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL10, max UDMA/33 [ 2.001286] ata2.00: limited to UDMA/33 due to 40-wire cable [ 2.008980] ata2.00: configured for UDMA/33 [ 2.024473] ata2.01: configured for UDMA/33 [ 2.026994] scsi 1:0:0:0: Direct-Access ATA ST310211A 3.39 PQ: 0 ANSI: 5 [ 2.027538] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 2.033505] ata1.00: configured for UDMA/100 [ 2.042215] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL10 PQ: 0 ANSI: 5 [ 2.043394] sd 1:0:0:0: [sdc] 19541088 512-byte logical blocks: (10.0 GB/9.31 GiB) [ 2.048482] ata1.01: configured for UDMA/33 [ 2.073461] ata1.00: configured for UDMA/100 [ 2.088445] ata1.01: configured for UDMA/33 [ 2.088519] ata1: EH complete [ 2.093355] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.093435] Uniform CD-ROM driver Revision: 3.20 [ 2.093849] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 2.094057] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 2.094930] sd 1:0:0:0: [sdc] Write Protect is off [ 2.095003] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.095150] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.095695] sdc: [ 2.097022] ata1.00: limiting speed to UDMA/66:PIO4 [ 2.097135] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2.097200] ata1.00: BMDMA stat 0x64 [ 2.097263] ata1.00: failed command: READ DMA [ 2.097336] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 2.097340] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 2.097492] ata1.00: status: { DRDY ERR } [ 2.097550] ata1.00: error: { ICRC ABRT } [ 2.097658] ata1: soft resetting link [ 2.123123] sdc1 [ 2.124673] sd 1:0:0:0: [sdc] Attached SCSI disk [ 2.293419] ata1.00: configured for UDMA/66 [ 2.308420] ata1.01: configured for UDMA/33 [ 2.333424] ata1.00: configured for UDMA/66 [ 2.348420] ata1.01: configured for UDMA/33 [ 2.348492] ata1: EH complete [ 2.354719] sda1 [ 2.355268] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.356555] sda: detected capacity change from 0 to 80026361856 [ 2.357087] sdb: sdb1 sdb2 < [ 2.538321] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.538463] sdb5 > [ 2.539588] sda: detected capacity change from 0 to 80026361856 [ 2.539977] sdb: detected capacity change from 0 to 3228696576 [ 2.541296] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.581762] 8139too Fast Ethernet driver 0.9.28 [ 2.582927] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 2.582996] 8139too 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 2.585809] eth0: RealTek RTL8139 at 0xc000, 00:00:21:d2:e0:4b, IRQ 11 [ 4.016188] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 31.631266] udev: starting version 151 [ 31.666328] Adding 197624k swap on /dev/sdb5. Priority:-1 extents:1 across:197624k [ 32.131274] lp: driver loaded but no devices found [ 32.264541] parport_pc: VIA 686A/8231 detected [ 32.264550] parport_pc: probing current configuration [ 32.264574] parport_pc: Current parallel port base: 0x378 [ 32.264630] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] [ 32.365883] lp0: using parport0 (interrupt-driven). [ 32.365894] parport_pc: VIA parallel port: io=0x378, irq=7 [ 32.366499] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.864665] Linux agpgart interface v0.103 [ 32.951104] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [ 32.951212] usbcore: registered new interface driver usblp [ 33.172936] agpgart: Detected VIA Apollo Pro 133 chipset [ 33.229859] ppdev: user-space parallel port driver [ 33.233919] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xd0000000 [ 33.247025] vga16fb: initializing [ 33.247042] vga16fb: mapped to 0xc00a0000 [ 33.247686] fb0: VGA16 VGA frame buffer device [ 33.306553] psmouse serio1: ID: 00 00 3c [ 33.748329] Console: switching to colour frame buffer device 80x30 [ 33.807320] type=1505 audit(1397922752.857:2): operation="profile_load" pid=528 name="/sbin/dhclient3" [ 33.808672] type=1505 audit(1397922752.861:3): operation="profile_load" pid=528 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 33.809369] type=1505 audit(1397922752.861:4): operation="profile_load" pid=528 name="/usr/lib/connman/scripts/dhclient-script" [ 34.058447] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input4 [ 36.471499] type=1505 audit(1397922755.521:5): operation="profile_load" pid=630 name="/usr/share/gdm/guest-session/Xsession" [ 36.504117] type=1505 audit(1397922755.557:6): operation="profile_replace" pid=631 name="/sbin/dhclient3" [ 36.523346] type=1505 audit(1397922755.573:7): operation="profile_replace" pid=631 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 36.524146] type=1505 audit(1397922755.577:8): operation="profile_replace" pid=631 name="/usr/lib/connman/scripts/dhclient-script" [ 36.599942] type=1505 audit(1397922755.649:9): operation="profile_load" pid=634 name="/usr/bin/evince" [ 36.656708] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 36.685263] type=1505 audit(1397922755.737:10): operation="profile_load" pid=634 name="/usr/bin/evince-previewer" [ 36.758681] type=1505 audit(1397922755.809:11): operation="profile_load" pid=634 name="/usr/bin/evince-thumbnailer" [ 47.604041] eth0: no IPv6 routers present [ 795.607596] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 795.622372] SGI XFS Quota Management subsystem [ 795.667558] JFS: nTxBlock = 7008, nTxLock = 56068 [ 795.792007] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 795.898766] QNX4 filesystem 0.2.3 registered. [ 796.082200] Btrfs loaded [ 940.323480] udev: starting version 151