[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-26-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 (Ubuntu 3.2.0-26.41-generic 3.2.19) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-26-generic root=UUID=22c39513-c525-423f-b813-dba65446fc6c ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e9e00 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc7000 (usable) [ 0.000000] BIOS-e820: 00000000bffc7000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: Hewlett-Packard HP xw9400 Workstation/0A1Ch, BIOS 786D6 v02.21 06/25/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000140000000 aka 5120M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbffc7 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fe700] fe700 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc7000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bffc7000 page 4k [ 0.000000] kernel direct mapping tables up to bffc7000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ bffc1000-bffc7000 [ 0.000000] RAMDISK: 358a4000 - 36c4a000 [ 0.000000] ACPI: RSDP 00000000000e9e10 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000bffca474 0006C (v01 HPQOEM SLIC-WKS 20070625 00000000) [ 0.000000] ACPI: FACP 00000000bffca61c 000F4 (v03 HP COBRA 00000001 00000000) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) [ 0.000000] ACPI: DSDT 00000000bffcaa92 02159 (v01 HP DSDT 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000bffca200 00040 [ 0.000000] ACPI: SSDT 00000000bffccbeb 07744 (v02 HP PROJECT 00000001 MSFT 0100000E) [ 0.000000] ACPI: APIC 00000000bffca710 0009A (v01 HP COBRA 00000001 00000000) [ 0.000000] ACPI: ASF! 00000000bffca7f4 00063 (v32 HP COBRA 00000001 00000000) [ 0.000000] ACPI: WDRT 00000000bffca857 00047 (v01 HP COBRA 00000001 00000000) [ 0.000000] ACPI: SRAT 00000000bffca2ec 00150 (v02 HP COBRA 00000001 00000000) [ 0.000000] ACPI: MCFG 00000000bffca89e 0004C (v01 HP COBRA 00000001 00000000) [ 0.000000] ACPI: SLIC 00000000bffca8ea 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000) [ 0.000000] ACPI: TCPA 00000000bffcaa60 00032 (v01 HP COBRA 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 e8000-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000 [ 0.000000] NUMA: Node 0 [0,a0000) + [e8000,c0000000) -> [0,c0000000) [ 0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000) [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bffc7 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048403 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 765959 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xe3400000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xe3400000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000 [ 0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffc7000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83072 r8192 d23424 u262144 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027918 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-26-generic root=UUID=22c39513-c525-423f-b813-dba65446fc6c ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 0 size 32 MB [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000 [ 0.000000] Memory: 3959640k/5242880k available (6555k kernel code, 1049268k absent, 233972k reserved, 6645k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:1152 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2399.990 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.98 BogoMIPS (lpj=9599960) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004042] Security Framework initialized [ 0.004061] AppArmor: AppArmor initialized [ 0.004063] Yama: becoming mindful. [ 0.004551] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009749] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010854] Mount-cache hash table entries: 256 [ 0.011033] Initializing cgroup subsys cpuacct [ 0.011040] Initializing cgroup subsys memory [ 0.011051] Initializing cgroup subsys devices [ 0.011053] Initializing cgroup subsys freezer [ 0.011055] Initializing cgroup subsys blkio [ 0.011064] Initializing cgroup subsys perf_event [ 0.011095] tseg: 0000000000 [ 0.011112] CPU: Physical Processor ID: 0 [ 0.011113] CPU: Processor Core ID: 0 [ 0.011116] mce: CPU supports 5 MCE banks [ 0.011126] using AMD E400 aware idle routine [ 0.012720] ACPI: Core revision 20110623 [ 0.016015] ftrace: allocating 26991 entries in 106 pages [ 0.020888] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.060623] CPU0: Dual-Core AMD Opteron(tm) Processor 2216 stepping 03 [ 0.064003] Performance Events: AMD PMU driver. [ 0.064003] ... version: 0 [ 0.064003] ... bit width: 48 [ 0.064003] ... generic registers: 4 [ 0.064003] ... value mask: 0000ffffffffffff [ 0.064003] ... max period: 00007fffffffffff [ 0.064003] ... fixed-purpose events: 0 [ 0.064003] ... event mask: 000000000000000f [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] Booting Node 0, Processors #1 [ 0.064003] smpboot cpu 1: start_ip = 97000 [ 0.148114] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148140] Brought up 2 CPUs [ 0.148142] Total of 2 processors activated (9600.25 BogoMIPS). [ 0.148850] devtmpfs: initialized [ 0.149423] EVM: security.selinux [ 0.149424] EVM: security.SMACK64 [ 0.149426] EVM: security.capability [ 0.149497] print_constraints: dummy: [ 0.149497] RTC time: 14:31:22, date: 07/19/12 [ 0.149497] NET: Registered protocol family 16 [ 0.149497] Trying to unpack rootfs image as initramfs... [ 0.149497] node 0 link 2: io port [3000, 4fff] [ 0.149497] node 0 link 1: io port [1000, 2fff] [ 0.149497] node 0 link 1: io port [e000, efff] [ 0.149497] TOM: 00000000c0000000 aka 3072M [ 0.149497] node 0 link 2: mmio [a0000, bffff] [ 0.149497] node 0 link 1: mmio [f4000000, f7ffffff] [ 0.149497] node 0 link 2: mmio [c0000000, dfffffff] [ 0.149497] node 0 link 2: mmio [e0000000, e32fffff] [ 0.149497] node 0 link 1: mmio [e3300000, e34fffff] [ 0.149497] TOM2: 0000000140000000 aka 5120M [ 0.149497] bus: [00, 3f] on node 0 link 2 [ 0.149497] bus: 00 index 0 [io 0x3000-0xdfff] [ 0.149497] bus: 00 index 1 [io 0x0000-0x0fff] [ 0.149497] bus: 00 index 2 [io 0xf000-0xffff] [ 0.149497] bus: 00 index 3 [mem 0x000a0000-0x000bffff] [ 0.149497] bus: 00 index 4 [mem 0xc0000000-0xe32fffff] [ 0.149497] bus: 00 index 5 [mem 0xe3500000-0xf3ffffff] [ 0.149497] bus: 00 index 6 [mem 0xf8000000-0xffffffff] [ 0.149497] bus: 00 index 7 [mem 0x140000000-0xfcffffffff] [ 0.149497] bus: [40, ff] on node 0 link 1 [ 0.149497] bus: 40 index 0 [io 0x1000-0x2fff] [ 0.149497] bus: 40 index 1 [io 0xe000-0xefff] [ 0.149497] bus: 40 index 2 [mem 0xf4000000-0xf7ffffff] [ 0.149497] bus: 40 index 3 [mem 0xe3300000-0xe34fffff] [ 0.149497] ACPI: bus type pci registered [ 0.149497] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.149497] PCI: MMCONFIG for domain 0001 [bus 40-7f] at [mem 0xf4000000-0xf7ffffff] (base 0xf0000000) [ 0.149497] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.149497] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.161856] PCI: Using configuration type 1 for base access [ 0.162993] bio: create slab at 0 [ 0.163094] ACPI: Added _OSI(Module Device) [ 0.163096] ACPI: Added _OSI(Processor Device) [ 0.163098] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.163100] ACPI: Added _OSI(Processor Aggregator Device) [ 0.163937] ACPI: EC: Look up EC in DSDT [ 0.200323] ACPI: Interpreter enabled [ 0.200327] ACPI: (supports S0 S1 S3 S4 S5) [ 0.200348] ACPI: Using IOAPIC for interrupt routing [ 0.204811] ACPI: No dock devices found. [ 0.204814] HEST: Table not found. [ 0.204818] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.205251] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.206114] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.206117] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored) [ 0.206120] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored) [ 0.206122] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored) [ 0.206125] pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff] (ignored) [ 0.206127] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored) [ 0.206130] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xe32fffff] (ignored) [ 0.206133] pci_root PNP0A08:00: host bridge window [io 0x3000-0x4fff] (ignored) [ 0.206158] pci 0000:00:00.0: [10de:0369] type 0 class 0x000500 [ 0.206336] pci 0000:00:01.0: [10de:0364] type 0 class 0x000601 [ 0.206358] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.206372] pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05 [ 0.206398] pci 0000:00:01.1: reg 20: [io 0x4000-0x403f] [ 0.206403] pci 0000:00:01.1: reg 24: [io 0x4040-0x407f] [ 0.206433] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.206439] pci 0000:00:01.1: PME# disabled [ 0.206455] pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03 [ 0.206464] pci 0000:00:02.0: reg 10: [mem 0xe3244000-0xe3244fff] [ 0.206492] pci 0000:00:02.0: supports D1 D2 [ 0.206494] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.206498] pci 0000:00:02.0: PME# disabled [ 0.206508] pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03 [ 0.206516] pci 0000:00:02.1: reg 10: [mem 0xe324a000-0xe324a0ff] [ 0.206545] pci 0000:00:02.1: supports D1 D2 [ 0.206547] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.206551] pci 0000:00:02.1: PME# disabled [ 0.206566] pci 0000:00:04.0: [10de:036e] type 0 class 0x000101 [ 0.206581] pci 0000:00:04.0: reg 20: [io 0x4080-0x408f] [ 0.206605] pci 0000:00:05.0: [10de:037f] type 0 class 0x000101 [ 0.206613] pci 0000:00:05.0: reg 10: [io 0x40c0-0x40c7] [ 0.206618] pci 0000:00:05.0: reg 14: [io 0x4100-0x4103] [ 0.206622] pci 0000:00:05.0: reg 18: [io 0x40c8-0x40cf] [ 0.206627] pci 0000:00:05.0: reg 1c: [io 0x4104-0x4107] [ 0.206631] pci 0000:00:05.0: reg 20: [io 0x4090-0x409f] [ 0.206636] pci 0000:00:05.0: reg 24: [mem 0xe3245000-0xe3245fff] [ 0.206666] pci 0000:00:05.1: [10de:037f] type 0 class 0x000101 [ 0.206674] pci 0000:00:05.1: reg 10: [io 0x40d0-0x40d7] [ 0.206678] pci 0000:00:05.1: reg 14: [io 0x4108-0x410b] [ 0.206683] pci 0000:00:05.1: reg 18: [io 0x40d8-0x40df] [ 0.206687] pci 0000:00:05.1: reg 1c: [io 0x410c-0x410f] [ 0.206692] pci 0000:00:05.1: reg 20: [io 0x40a0-0x40af] [ 0.206697] pci 0000:00:05.1: reg 24: [mem 0xe3246000-0xe3246fff] [ 0.206724] pci 0000:00:05.2: [10de:037f] type 0 class 0x000101 [ 0.206732] pci 0000:00:05.2: reg 10: [io 0x40e0-0x40e7] [ 0.206736] pci 0000:00:05.2: reg 14: [io 0x4110-0x4113] [ 0.206741] pci 0000:00:05.2: reg 18: [io 0x40e8-0x40ef] [ 0.206745] pci 0000:00:05.2: reg 1c: [io 0x4114-0x4117] [ 0.206750] pci 0000:00:05.2: reg 20: [io 0x40b0-0x40bf] [ 0.206754] pci 0000:00:05.2: reg 24: [mem 0xe3247000-0xe3247fff] [ 0.206784] pci 0000:00:06.0: [10de:0370] type 1 class 0x000604 [ 0.206813] pci 0000:00:06.1: [10de:0371] type 0 class 0x000403 [ 0.206822] pci 0000:00:06.1: reg 10: [mem 0xe3240000-0xe3243fff] [ 0.206857] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.206860] pci 0000:00:06.1: PME# disabled [ 0.206880] pci 0000:00:08.0: [10de:0373] type 0 class 0x000680 [ 0.206890] pci 0000:00:08.0: reg 10: [mem 0xe3248000-0xe3248fff] [ 0.206895] pci 0000:00:08.0: reg 14: [io 0x40f0-0x40f7] [ 0.206900] pci 0000:00:08.0: reg 18: [mem 0xe324a100-0xe324a1ff] [ 0.206904] pci 0000:00:08.0: reg 1c: [mem 0xe324a300-0xe324a30f] [ 0.206934] pci 0000:00:08.0: supports D1 D2 [ 0.206936] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.206941] pci 0000:00:08.0: PME# disabled [ 0.206956] pci 0000:00:09.0: [10de:0373] type 0 class 0x000680 [ 0.206966] pci 0000:00:09.0: reg 10: [mem 0xe3249000-0xe3249fff] [ 0.206971] pci 0000:00:09.0: reg 14: [io 0x40f8-0x40ff] [ 0.206976] pci 0000:00:09.0: reg 18: [mem 0xe324a200-0xe324a2ff] [ 0.206980] pci 0000:00:09.0: reg 1c: [mem 0xe324a310-0xe324a31f] [ 0.207010] pci 0000:00:09.0: supports D1 D2 [ 0.207012] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.207017] pci 0000:00:09.0: PME# disabled [ 0.207033] pci 0000:00:0d.0: [10de:0378] type 1 class 0x000604 [ 0.207058] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.207061] pci 0000:00:0d.0: PME# disabled [ 0.207075] pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604 [ 0.207100] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.207103] pci 0000:00:0f.0: PME# disabled [ 0.207122] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.207148] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.207164] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.207180] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.207202] PCI: peer root bus 00 res updated from pci conf [ 0.207229] pci 0000:01:05.0: [104c:8023] type 0 class 0x000c00 [ 0.207240] pci 0000:01:05.0: reg 10: [mem 0xe3104000-0xe31047ff] [ 0.207247] pci 0000:01:05.0: reg 14: [mem 0xe3100000-0xe3103fff] [ 0.207287] pci 0000:01:05.0: supports D1 D2 [ 0.207289] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot [ 0.207293] pci 0000:01:05.0: PME# disabled [ 0.207316] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.207320] pci 0000:00:06.0: bridge window [mem 0xe3100000-0xe31fffff] [ 0.207324] pci 0000:00:06.0: bridge window [io 0x3000-0xdfff] (subtractive decode) [ 0.207326] pci 0000:00:06.0: bridge window [io 0x0000-0x0fff] (subtractive decode) [ 0.207329] pci 0000:00:06.0: bridge window [io 0xf000-0xffff] (subtractive decode) [ 0.207332] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.207334] pci 0000:00:06.0: bridge window [mem 0xc0000000-0xe32fffff] (subtractive decode) [ 0.207337] pci 0000:00:06.0: bridge window [mem 0xe3500000-0xf3ffffff] (subtractive decode) [ 0.207340] pci 0000:00:06.0: bridge window [mem 0xf8000000-0xffffffff] (subtractive decode) [ 0.207343] pci 0000:00:06.0: bridge window [mem 0x140000000-0xfcffffffff] (subtractive decode) [ 0.207371] pci 0000:2b:00.0: [1033:0125] type 1 class 0x000604 [ 0.207424] pci 0000:2b:00.0: supports D1 [ 0.207426] pci 0000:2b:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.207429] pci 0000:2b:00.0: PME# disabled [ 0.207450] pci 0000:2b:00.1: [1033:0125] type 1 class 0x000604 [ 0.207468] pci 0000:2b:00.1: reg 10: [mem 0xe3000000-0xe300007f 64bit] [ 0.207531] pci 0000:2b:00.1: supports D1 [ 0.207533] pci 0000:2b:00.1: PME# supported from D0 D1 D3hot D3cold [ 0.207538] pci 0000:2b:00.1: PME# disabled [ 0.207559] pci 0000:2b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.207568] pci 0000:00:0d.0: PCI bridge to [bus 2b-2d] [ 0.207572] pci 0000:00:0d.0: bridge window [mem 0xe3000000-0xe30fffff] [ 0.207624] pci 0000:2b:00.0: PCI bridge to [bus 2c-2c] [ 0.207706] pci 0000:2b:00.1: PCI bridge to [bus 2d-2d] [ 0.207754] pci 0000:18:00.0: [10de:040e] type 0 class 0x000300 [ 0.207762] pci 0000:18:00.0: reg 10: [mem 0xe2000000-0xe2ffffff] [ 0.207771] pci 0000:18:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.207780] pci 0000:18:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit] [ 0.207787] pci 0000:18:00.0: reg 24: [io 0x3000-0x307f] [ 0.207794] pci 0000:18:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.212029] pci 0000:00:0f.0: PCI bridge to [bus 18-18] [ 0.212032] pci 0000:00:0f.0: bridge window [io 0x3000-0x3fff] [ 0.212035] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xe2ffffff] [ 0.212039] pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.212046] pci_bus 0000:00: on NUMA node 0 (pxm 0) [ 0.212050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.212102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPA._PRT] [ 0.212126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.212149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC._PRT] [ 0.212167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC.PCXB._PRT] [ 0.212236] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.212240] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.212241] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.218109] ACPI: PCI Root Bridge [PCI1] (domain 0001 [bus 40-ff]) [ 0.218979] pci_root PNP0A03:00: host bridge window [io 0x1000-0x2fff] (ignored) [ 0.218983] pci_root PNP0A03:00: host bridge window [mem 0xe3300000-0xe34fffff] (ignored) [ 0.219004] pci 0001:40:00.0: [10de:0369] type 0 class 0x000500 [ 0.219168] pci 0001:40:01.0: [10de:0361] type 0 class 0x000500 [ 0.219175] pci 0001:40:01.0: reg 14: [mem 0xe3400000-0xe3400fff] [ 0.219187] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.219200] pci 0001:40:01.1: [10de:0368] type 0 class 0x000c05 [ 0.219221] pci 0001:40:01.1: reg 20: [io 0x2000-0x203f] [ 0.219226] pci 0001:40:01.1: reg 24: [io 0x2040-0x207f] [ 0.219253] pci 0001:40:01.1: PME# supported from D3hot D3cold [ 0.219258] pci 0001:40:01.1: PME# disabled [ 0.219284] pci 0001:40:0d.0: [10de:0378] type 1 class 0x000604 [ 0.219302] pci 0001:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.219304] pci 0001:40:0d.0: PME# disabled [ 0.219324] PCI: peer root bus 40 res updated from pci conf [ 0.219347] pci 0001:6b:00.0: [1000:0058] type 0 class 0x000100 [ 0.219355] pci 0001:6b:00.0: reg 10: [io 0x1000-0x10ff] [ 0.219364] pci 0001:6b:00.0: reg 14: [mem 0xe3310000-0xe3313fff 64bit] [ 0.219372] pci 0001:6b:00.0: reg 1c: [mem 0xe3300000-0xe330ffff 64bit] [ 0.219383] pci 0001:6b:00.0: reg 30: [mem 0x00000000-0x000fffff pref] [ 0.219409] pci 0001:6b:00.0: supports D1 D2 [ 0.224021] pci 0001:40:0d.0: PCI bridge to [bus 6b-6b] [ 0.224024] pci 0001:40:0d.0: bridge window [io 0x1000-0x1fff] [ 0.224027] pci 0001:40:0d.0: bridge window [mem 0xe3300000-0xe33fffff] [ 0.224032] pci_bus 0001:40: on NUMA node 0 (pxm 0) [ 0.224046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXPC._PRT] [ 0.224100] pci0001:40: Requesting ACPI _OSC control (0x1d) [ 0.224104] pci0001:40: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.224105] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.224636] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 16 17 18 19 20 21 22 23) [ 0.224724] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled. [ 0.224810] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled. [ 0.224896] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 16 17 18 19 20 21 22 23) [ 0.224981] ACPI: PCI Interrupt Link [LXPA] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled. [ 0.225067] ACPI: PCI Interrupt Link [LXPB] (IRQs *5 7 10 16 17 18 19 20 21 22 23) [ 0.225156] ACPI: PCI Interrupt Link [LXPC] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled. [ 0.225241] ACPI: PCI Interrupt Link [LXPD] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled. [ 0.225271] ACPI: PCI Interrupt Link [LXA2] (IRQs *40), disabled. [ 0.225295] ACPI: PCI Interrupt Link [LXB2] (IRQs *41), disabled. [ 0.225319] ACPI: PCI Interrupt Link [LXC2] (IRQs *42), disabled. [ 0.225343] ACPI: PCI Interrupt Link [LXD2] (IRQs *43), disabled. [ 0.225424] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *11 [ 0.225511] ACPI: PCI Interrupt Link [LSB0] (IRQs *5 7 10 16 17 18 19 20 21 22 23) [ 0.225601] ACPI: PCI Interrupt Link [LSB2] (IRQs 5 7 *10 16 17 18 19 20 21 22 23) [ 0.225687] ACPI: PCI Interrupt Link [LMC0] (IRQs *5 7 10 16 17 18 19 20 21 22 23) [ 0.225772] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 *10 16 17 18 19 20 21 22 23) [ 0.225858] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *11 [ 0.225944] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *0, disabled. [ 0.226030] ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 10 16 17 18 19 20 21 22 23) *11 [ 0.226115] ACPI: PCI Interrupt Link [LSA1] (IRQs *5 7 10 16 17 18 19 20 21 22 23) [ 0.226201] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 *10 16 17 18 19 20 21 22 23) [ 0.226342] vgaarb: device added: PCI:0000:18:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.226347] vgaarb: loaded [ 0.226348] vgaarb: bridge control possible 0000:18:00.0 [ 0.226476] i2c-core: driver [aat2870] using legacy suspend method [ 0.226478] i2c-core: driver [aat2870] using legacy resume method [ 0.226552] SCSI subsystem initialized [ 0.226628] libata version 3.00 loaded. [ 0.226689] usbcore: registered new interface driver usbfs [ 0.226702] usbcore: registered new interface driver hub [ 0.226732] usbcore: registered new device driver usb [ 0.226832] PCI: Using ACPI for IRQ routing [ 0.227957] PCI: pci_cache_line_size set to 64 bytes [ 0.228047] Expanded resource reserved due to conflict with PCI Bus #00 [ 0.228049] reserve RAM buffer: 000000000009c000 - 000000000009ffff [ 0.228052] reserve RAM buffer: 00000000bffc7000 - 00000000bfffffff [ 0.228169] NetLabel: Initializing [ 0.228171] NetLabel: domain hash size = 128 [ 0.228172] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.228190] NetLabel: unlabeled traffic allowed by default [ 0.236884] AppArmor: AppArmor Filesystem Enabled [ 0.236926] pnp: PnP ACPI init [ 0.236951] ACPI: bus type pnp registered [ 0.237435] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.237438] pnp 00:00: [bus 00-3f] [ 0.237441] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.237443] pnp 00:00: [io 0x0000-0x03af window] [ 0.237445] pnp 00:00: [io 0x03b0-0x03df window] [ 0.237447] pnp 00:00: [io 0x03e0-0x0cf7 window] [ 0.237450] pnp 00:00: [io 0x0d00-0x0fff window] [ 0.237452] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 0.237454] pnp 00:00: [mem 0xe0000000-0xe32fffff window] [ 0.237457] pnp 00:00: [mem 0x00000000 window] [ 0.237459] pnp 00:00: [mem 0x00000000 window] [ 0.237461] pnp 00:00: [mem 0x00000000 window] [ 0.237463] pnp 00:00: [mem 0x00000000 window] [ 0.237466] pnp 00:00: [io 0x3000-0x4fff window] [ 0.237547] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.237587] pnp 00:01: [io 0x00f0-0x00ff] [ 0.237601] pnp 00:01: [irq 13] [ 0.237633] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.237678] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.237710] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.237720] pnp 00:03: [io 0x0000-0x000f] [ 0.237722] pnp 00:03: [io 0x0080-0x008f] [ 0.237727] pnp 00:03: [io 0x00c0-0x00df] [ 0.237730] pnp 00:03: [dma 4] [ 0.237758] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.237768] pnp 00:04: [io 0x0070-0x0071] [ 0.237775] pnp 00:04: [irq 8] [ 0.237805] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.237814] pnp 00:05: [io 0x0061] [ 0.237843] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.237861] pnp 00:06: [irq 12] [ 0.237890] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.237899] pnp 00:07: [io 0x0060] [ 0.237901] pnp 00:07: [io 0x0064] [ 0.237909] pnp 00:07: [irq 1] [ 0.237940] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.238087] pnp 00:08: [irq 4] [ 0.238089] pnp 00:08: [io 0x03f8-0x03ff] [ 0.238161] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.238324] pnp 00:09: [irq 6] [ 0.238326] pnp 00:09: [dma 2] [ 0.238328] pnp 00:09: [io 0x03f0-0x03f5] [ 0.238330] pnp 00:09: [io 0x03f7] [ 0.238370] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.238415] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.238445] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active) [ 0.238455] pnp 00:0b: [io 0x004e-0x004f] [ 0.238457] pnp 00:0b: [io 0x04c0-0x04cb] [ 0.238488] pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.238535] pnp 00:0c: [io 0x0010-0x001f] [ 0.238537] pnp 00:0c: [io 0x0050-0x0053] [ 0.238539] pnp 00:0c: [io 0x0072-0x0077] [ 0.238541] pnp 00:0c: [io 0x0090-0x009f] [ 0.238546] pnp 00:0c: [io 0x04d0-0x04d1] [ 0.238624] system 00:0c: [io 0x04d0-0x04d1] has been reserved [ 0.238627] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.238649] pnp 00:0d: [io 0x0400-0x047f] [ 0.238651] pnp 00:0d: [io 0x0480-0x048f] [ 0.238654] pnp 00:0d: [io 0xe000-0xe07f] [ 0.238656] pnp 00:0d: [io 0xe080-0xe0ff] [ 0.238658] pnp 00:0d: [io 0xf200-0xf27f] [ 0.238660] pnp 00:0d: [io 0xf280-0xf2ff] [ 0.238662] pnp 00:0d: [io 0xf800-0xf87f] [ 0.238664] pnp 00:0d: [io 0xf880-0xf8ff] [ 0.238666] pnp 00:0d: [io 0xf900-0xf97f] [ 0.238668] pnp 00:0d: [io 0xf980-0xf9ff] [ 0.238670] pnp 00:0d: [io 0xfa00-0xfa7f] [ 0.238672] pnp 00:0d: [io 0xfa80-0xfaff] [ 0.238674] pnp 00:0d: [io 0xfc00-0xfc7f] [ 0.238676] pnp 00:0d: [io 0xfc80-0xfcff] [ 0.238678] pnp 00:0d: [io 0xfe00-0xfe7f] [ 0.238680] pnp 00:0d: [io 0xfe80-0xfeff] [ 0.238750] system 00:0d: [io 0x0400-0x047f] has been reserved [ 0.238753] system 00:0d: [io 0x0480-0x048f] has been reserved [ 0.238756] system 00:0d: [io 0xe000-0xe07f] has been reserved [ 0.238759] system 00:0d: [io 0xe080-0xe0ff] has been reserved [ 0.238761] system 00:0d: [io 0xf200-0xf27f] has been reserved [ 0.238764] system 00:0d: [io 0xf280-0xf2ff] has been reserved [ 0.238767] system 00:0d: [io 0xf800-0xf87f] has been reserved [ 0.238769] system 00:0d: [io 0xf880-0xf8ff] has been reserved [ 0.238772] system 00:0d: [io 0xf900-0xf97f] has been reserved [ 0.238775] system 00:0d: [io 0xf980-0xf9ff] has been reserved [ 0.238777] system 00:0d: [io 0xfa00-0xfa7f] has been reserved [ 0.238780] system 00:0d: [io 0xfa80-0xfaff] has been reserved [ 0.238782] system 00:0d: [io 0xfc00-0xfc7f] has been reserved [ 0.238785] system 00:0d: [io 0xfc80-0xfcff] has been reserved [ 0.238788] system 00:0d: [io 0xfe00-0xfe7f] has been reserved [ 0.238790] system 00:0d: [io 0xfe80-0xfeff] has been reserved [ 0.238793] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.238836] pnp 00:0e: [mem 0xe3200000-0xe3240000] [ 0.238848] pnp 00:0e: disabling [mem 0xe3200000-0xe3240000] because it overlaps 0000:00:06.1 BAR 0 [mem 0xe3240000-0xe3243fff] [ 0.238905] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.239385] pnp 00:0f: [bus 40-ff] [ 0.239387] pnp 00:0f: [io 0x0000 window] [ 0.239389] pnp 00:0f: [io 0x0000 window] [ 0.239391] pnp 00:0f: [io 0x1000-0x2fff window] [ 0.239393] pnp 00:0f: [mem 0x00000000 window] [ 0.239396] pnp 00:0f: [mem 0x00000000 window] [ 0.239398] pnp 00:0f: [mem 0x00000000 window] [ 0.239400] pnp 00:0f: [mem 0xe3300000-0xe34fffff window] [ 0.239402] pnp 00:0f: [mem 0x00000000 window] [ 0.239404] pnp 00:0f: [mem 0x00000000 window] [ 0.239407] pnp 00:0f: [mem 0x00000000 window] [ 0.239449] pnp 00:0f: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.292029] pnp 00:10: [mem 0x00000000-0x0009ffff] [ 0.292031] pnp 00:10: [mem 0x00100000-0xbfffffff] [ 0.292034] pnp 00:10: [mem 0x000e8000-0x000fffff] [ 0.292036] pnp 00:10: [mem 0xfec01000-0xffffffff] [ 0.292038] pnp 00:10: [mem 0x000dbe00-0x000e7fff] [ 0.292062] pnp 00:10: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0001:6b:00.0 BAR 6 [mem 0x00000000-0x000fffff pref] [ 0.292066] pnp 00:10: disabling [mem 0x000e8000-0x000fffff] because it overlaps 0001:6b:00.0 BAR 6 [mem 0x00000000-0x000fffff pref] [ 0.292070] pnp 00:10: disabling [mem 0x000dbe00-0x000e7fff] because it overlaps 0001:6b:00.0 BAR 6 [mem 0x00000000-0x000fffff pref] [ 0.292125] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.292128] system 00:10: [mem 0xfec01000-0xffffffff] has been reserved [ 0.292131] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.292142] pnp 00:11: [mem 0xf0000000-0xf7ffffff window] [ 0.292145] pnp 00:11: [io 0x004e-0x004f window] [ 0.292209] system 00:11: [mem 0xf0000000-0xf7ffffff window] could not be reserved [ 0.292212] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.292225] pnp: PnP ACPI: found 18 devices [ 0.292226] ACPI: ACPI bus type pnp unregistered [ 0.298690] Switching to clocksource acpi_pm [ 0.298786] PCI: max bus depth: 2 pci_try_num: 3 [ 0.298817] pci 0000:00:06.0: PCI bridge to [bus 01-01] [ 0.298821] pci 0000:00:06.0: bridge window [mem 0xe3100000-0xe31fffff] [ 0.298826] pci 0000:2b:00.0: PCI bridge to [bus 2c-2c] [ 0.298835] pci 0000:2b:00.1: PCI bridge to [bus 2d-2d] [ 0.298848] pci 0000:00:0d.0: PCI bridge to [bus 2b-2d] [ 0.298851] pci 0000:00:0d.0: bridge window [mem 0xe3000000-0xe30fffff] [ 0.298858] pci 0000:18:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.298860] pci 0000:00:0f.0: PCI bridge to [bus 18-18] [ 0.298863] pci 0000:00:0f.0: bridge window [io 0x3000-0x3fff] [ 0.298866] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xe2ffffff] [ 0.298869] pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.298876] pci 0001:40:0d.0: BAR 15: can't assign mem pref (size 0x100000) [ 0.298879] pci 0001:6b:00.0: BAR 6: can't assign mem pref (size 0x100000) [ 0.298881] pci 0001:40:0d.0: PCI bridge to [bus 6b-6b] [ 0.298884] pci 0001:40:0d.0: bridge window [io 0x1000-0x1fff] [ 0.298887] pci 0001:40:0d.0: bridge window [mem 0xe3300000-0xe33fffff] [ 0.298895] pci 0000:00:06.0: setting latency timer to 64 [ 0.298900] pci 0000:00:0d.0: setting latency timer to 64 [ 0.298907] pci 0000:2b:00.0: setting latency timer to 64 [ 0.299056] ACPI: PCI Interrupt Link [LXPD] enabled at IRQ 23 [ 0.299071] pci 0000:2b:00.1: PCI INT A -> Link[LXPD] -> GSI 23 (level, high) -> IRQ 23 [ 0.299076] pci 0000:2b:00.1: setting latency timer to 64 [ 0.299082] pci 0000:00:0f.0: setting latency timer to 64 [ 0.299086] pci 0001:40:0d.0: setting latency timer to 64 [ 0.299089] pci_bus 0000:00: resource 4 [io 0x3000-0xdfff] [ 0.299092] pci_bus 0000:00: resource 5 [io 0x0000-0x0fff] [ 0.299094] pci_bus 0000:00: resource 6 [io 0xf000-0xffff] [ 0.299097] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.299099] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xe32fffff] [ 0.299102] pci_bus 0000:00: resource 9 [mem 0xe3500000-0xf3ffffff] [ 0.299104] pci_bus 0000:00: resource 10 [mem 0xf8000000-0xffffffff] [ 0.299107] pci_bus 0000:00: resource 11 [mem 0x140000000-0xfcffffffff] [ 0.299110] pci_bus 0000:01: resource 1 [mem 0xe3100000-0xe31fffff] [ 0.299112] pci_bus 0000:01: resource 4 [io 0x3000-0xdfff] [ 0.299115] pci_bus 0000:01: resource 5 [io 0x0000-0x0fff] [ 0.299117] pci_bus 0000:01: resource 6 [io 0xf000-0xffff] [ 0.299120] pci_bus 0000:01: resource 7 [mem 0x000a0000-0x000bffff] [ 0.299122] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xe32fffff] [ 0.299125] pci_bus 0000:01: resource 9 [mem 0xe3500000-0xf3ffffff] [ 0.299127] pci_bus 0000:01: resource 10 [mem 0xf8000000-0xffffffff] [ 0.299130] pci_bus 0000:01: resource 11 [mem 0x140000000-0xfcffffffff] [ 0.299133] pci_bus 0000:2b: resource 1 [mem 0xe3000000-0xe30fffff] [ 0.299136] pci_bus 0000:18: resource 0 [io 0x3000-0x3fff] [ 0.299139] pci_bus 0000:18: resource 1 [mem 0xe0000000-0xe2ffffff] [ 0.299142] pci_bus 0000:18: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.299145] pci_bus 0001:40: resource 4 [io 0x1000-0x2fff] [ 0.299147] pci_bus 0001:40: resource 5 [io 0xe000-0xefff] [ 0.299149] pci_bus 0001:40: resource 6 [mem 0xf4000000-0xf7ffffff] [ 0.299152] pci_bus 0001:40: resource 7 [mem 0xe3300000-0xe34fffff] [ 0.299154] pci_bus 0001:6b: resource 0 [io 0x1000-0x1fff] [ 0.299157] pci_bus 0001:6b: resource 1 [mem 0xe3300000-0xe33fffff] [ 0.299208] NET: Registered protocol family 2 [ 0.299405] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.299405] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.302950] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.303472] TCP: Hash tables configured (established 524288 bind 65536) [ 0.303474] TCP reno registered [ 0.303488] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.303537] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.303694] NET: Registered protocol family 1 [ 0.303956] ACPI: PCI Interrupt Link [LSB0] enabled at IRQ 22 [ 0.303978] pci 0000:00:02.0: PCI INT A -> Link[LSB0] -> GSI 22 (level, high) -> IRQ 22 [ 0.360047] pci 0000:00:02.0: PCI INT A disabled [ 0.360367] ACPI: PCI Interrupt Link [LSB2] enabled at IRQ 21 [ 0.360378] pci 0000:00:02.1: PCI INT B -> Link[LSB2] -> GSI 21 (level, high) -> IRQ 21 [ 0.360497] pci 0000:00:02.1: PCI INT B disabled [ 0.360547] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.360592] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.360636] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.360681] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.360728] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.360782] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.360840] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.360901] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.360966] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.360992] pci 0000:18:00.0: Boot video device [ 0.361065] pci 0001:40:00.0: Found enabled HT MSI Mapping [ 0.361071] PCI: CLS 64 bytes, default 64 [ 0.362132] PCI-DMA: Disabling AGP. [ 0.362228] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.362230] PCI-DMA: using GART IOMMU. [ 0.362234] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.366460] audit: initializing netlink socket (disabled) [ 0.366475] type=2000 audit(1342708281.360:1): initialized [ 0.405009] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.437333] VFS: Disk quotas dquot_6.5.2 [ 0.437403] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.438042] fuse init (API version 7.17) [ 0.438142] msgmni has been set to 7862 [ 0.438492] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.438521] io scheduler noop registered [ 0.438523] io scheduler deadline registered [ 0.438561] io scheduler cfq registered (default) [ 0.438722] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.438752] pcieport 0000:00:0d.0: irq 64 for MSI/MSI-X [ 0.438824] pcieport 0000:00:0f.0: setting latency timer to 64 [ 0.438845] pcieport 0000:00:0f.0: irq 65 for MSI/MSI-X [ 0.438968] pcieport 0001:40:0d.0: setting latency timer to 64 [ 0.438984] pcieport 0001:40:0d.0: irq 66 for MSI/MSI-X [ 0.439049] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.439074] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.439239] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.439246] ACPI: Power Button [PBTN] [ 0.439294] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.439297] ACPI: Power Button [PWRF] [ 0.440857] ERST: Table is not found! [ 0.440858] GHES: HEST is not enabled! [ 0.440945] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.461325] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.559009] Freeing initrd memory: 20120k freed [ 0.660607] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.672424] hpet_acpi_add: no address or irqs in _CRS [ 0.672455] Linux agpgart interface v0.103 [ 0.674314] brd: module loaded [ 0.675304] loop: module loaded [ 0.675661] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 0.676026] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20 [ 0.676045] pata_acpi 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, high) -> IRQ 20 [ 0.676066] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 0.676074] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.676457] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 19 [ 0.676469] pata_acpi 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 19 (level, high) -> IRQ 19 [ 0.676485] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 0.676493] pata_acpi 0000:00:05.1: PCI INT B disabled [ 0.676764] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 18 [ 0.676776] pata_acpi 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 18 (level, high) -> IRQ 18 [ 0.676795] pata_acpi 0000:00:05.2: setting latency timer to 64 [ 0.676802] pata_acpi 0000:00:05.2: PCI INT C disabled [ 0.677381] Fixed MDIO Bus: probed [ 0.677405] tun: Universal TUN/TAP device driver, 1.6 [ 0.677407] tun: (C) 1999-2004 Max Krasnyansky [ 0.677471] PPP generic driver version 2.4.2 [ 0.677597] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.677656] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LSB2] -> GSI 21 (level, high) -> IRQ 21 [ 0.677686] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.677689] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.677773] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.677800] ehci_hcd 0000:00:02.1: debug port 1 [ 0.677806] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.677831] ehci_hcd 0000:00:02.1: irq 21, io mem 0xe324a000 [ 0.688023] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.688182] hub 1-0:1.0: USB hub found [ 0.688187] hub 1-0:1.0: 10 ports detected [ 0.688301] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.688355] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LSB0] -> GSI 22 (level, high) -> IRQ 22 [ 0.688366] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.688369] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.688427] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.688454] ohci_hcd 0000:00:02.0: irq 22, io mem 0xe3244000 [ 0.746133] hub 2-0:1.0: USB hub found [ 0.746139] hub 2-0:1.0: 10 ports detected [ 0.746237] uhci_hcd: USB Universal Host Controller Interface driver [ 0.746296] usbcore: registered new interface driver libusual [ 0.746352] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.748998] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.749005] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.749145] mousedev: PS/2 mouse device common for all mice [ 0.749305] rtc_cmos 00:04: RTC can wake from S4 [ 0.749436] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.749466] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.749558] device-mapper: uevent: version 1.0.3 [ 0.749644] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.749654] cpuidle: using governor ladder [ 0.749655] cpuidle: using governor menu [ 0.749657] EFI Variables Facility v0.08 2004-May-17 [ 0.749923] TCP cubic registered [ 0.750044] NET: Registered protocol family 10 [ 0.750598] NET: Registered protocol family 17 [ 0.750602] Registering the dns_resolver key type [ 0.750754] PM: Hibernation image not present or could not be loaded. [ 0.750768] registered taskstats version 1 [ 0.773138] Magic number: 4:396:536 [ 0.773154] bdi 1:14: hash matches [ 0.773165] tty ttyS16: hash matches [ 0.773257] rtc_cmos 00:04: setting system clock to 2012-07-19 14:31:22 UTC (1342708282) [ 0.773266] powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2216 (2 cpu cores) (version 2.20.00) [ 0.773305] powernow-k8: fid 0x10 (2400 MHz), vid 0x8 [ 0.773307] powernow-k8: fid 0xe (2200 MHz), vid 0xa [ 0.773308] powernow-k8: fid 0xc (2000 MHz), vid 0xc [ 0.773310] powernow-k8: fid 0xa (1800 MHz), vid 0xe [ 0.773312] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 0.773362] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.773364] EDD information not available. [ 0.775183] Freeing unused kernel memory: 920k freed [ 0.775564] Write protecting the kernel read-only data: 12288k [ 0.781395] Freeing unused kernel memory: 1616k freed [ 0.786827] Freeing unused kernel memory: 1200k freed [ 0.807689] udevd[129]: starting version 175 [ 0.900146] sata_nv 0000:00:05.0: version 3.5 [ 0.900166] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, high) -> IRQ 20 [ 0.900170] sata_nv 0000:00:05.0: Using SWNCQ mode [ 0.900683] sata_nv 0000:00:05.0: setting latency timer to 64 [ 0.902931] scsi0 : sata_nv [ 0.904397] scsi1 : sata_nv [ 0.904478] ata1: SATA max UDMA/133 cmd 0x40c0 ctl 0x4100 bmdma 0x4090 irq 20 [ 0.904481] ata2: SATA max UDMA/133 cmd 0x40c8 ctl 0x4104 bmdma 0x4098 irq 20 [ 0.906753] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 19 (level, high) -> IRQ 19 [ 0.906758] sata_nv 0000:00:05.1: Using SWNCQ mode [ 0.906819] sata_nv 0000:00:05.1: setting latency timer to 64 [ 0.907839] scsi2 : sata_nv [ 0.908679] scsi3 : sata_nv [ 0.908743] ata3: SATA max UDMA/133 cmd 0x40d0 ctl 0x4108 bmdma 0x40a0 irq 19 [ 0.908746] ata4: SATA max UDMA/133 cmd 0x40d8 ctl 0x410c bmdma 0x40a8 irq 19 [ 0.910809] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 18 (level, high) -> IRQ 18 [ 0.910814] sata_nv 0000:00:05.2: Using SWNCQ mode [ 0.910876] sata_nv 0000:00:05.2: setting latency timer to 64 [ 0.911862] scsi4 : sata_nv [ 0.912596] scsi5 : sata_nv [ 0.912659] ata5: SATA max UDMA/133 cmd 0x40e0 ctl 0x4110 bmdma 0x40b0 irq 18 [ 0.912662] ata6: SATA max UDMA/133 cmd 0x40e8 ctl 0x4114 bmdma 0x40b8 irq 18 [ 0.914293] FDC 0 is a post-1991 82077 [ 0.914339] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.914565] ACPI: PCI Interrupt Link [LMC0] enabled at IRQ 17 [ 0.914585] forcedeth 0000:00:08.0: PCI INT A -> Link[LMC0] -> GSI 17 (level, high) -> IRQ 17 [ 0.914591] forcedeth 0000:00:08.0: setting latency timer to 64 [ 1.220021] ata3: SATA link down (SStatus 0 SControl 300) [ 1.224019] ata5: SATA link down (SStatus 0 SControl 300) [ 1.304027] usb 2-4: new full-speed USB device number 2 using ohci_hcd [ 1.372024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.396135] ata1.00: ATAPI: ATAPI DVD A DH16A1L, KH37, max UDMA/100 [ 1.428120] ata1.00: configured for UDMA/100 [ 1.430029] scsi 0:0:0:0: CD-ROM ATAPI DVD A DH16A1L KH37 PQ: 0 ANSI: 5 [ 1.432954] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.432957] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.433107] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.433241] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.440701] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:1c:c4:ad:1b:b0 [ 1.440706] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.440991] ACPI: PCI Interrupt Link [LMC1] enabled at IRQ 16 [ 1.441009] forcedeth 0000:00:09.0: PCI INT A -> Link[LMC1] -> GSI 16 (level, high) -> IRQ 16 [ 1.441014] forcedeth 0000:00:09.0: setting latency timer to 64 [ 1.526063] hub 2-4:1.0: USB hub found [ 1.529047] hub 2-4:1.0: 3 ports detected [ 1.744025] ata2: SATA link down (SStatus 0 SControl 300) [ 1.834047] usb 2-4.1: new low-speed USB device number 3 using ohci_hcd [ 1.964720] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1c:c4:ad:1b:b1 [ 1.964725] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.964821] pata_amd 0000:00:04.0: version 0.4.1 [ 1.964867] pata_amd 0000:00:04.0: setting latency timer to 64 [ 1.965237] scsi6 : pata_amd [ 1.965324] scsi7 : pata_amd [ 1.965378] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4080 irq 14 [ 1.965381] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4088 irq 15 [ 1.968339] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1:1.0/input/input2 [ 1.968452] generic-usb 0003:413C:2011.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:02.0-4.1/input0 [ 1.982089] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1:1.1/input/input3 [ 1.982170] generic-usb 0003:413C:2011.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:02.0-4.1/input1 [ 1.982185] usbcore: registered new interface driver usbhid [ 1.982187] usbhid: USB HID core driver [ 2.038041] usb 2-4.3: new low-speed USB device number 4 using ohci_hcd [ 2.056040] ata4: SATA link down (SStatus 0 SControl 300) [ 2.158292] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.3/2-4.3:1.0/input/input4 [ 2.158417] generic-usb 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-4.3/input0 [ 2.368028] ata6: SATA link down (SStatus 0 SControl 300) [ 2.368103] ata8: port disabled--ignoring [ 2.369321] Fusion MPT base driver 3.04.20 [ 2.369324] Copyright (c) 1999-2008 LSI Corporation [ 2.370274] Fusion MPT SAS Host driver 3.04.20 [ 2.372402] ACPI: PCI Interrupt Link [LXD2] enabled at IRQ 43 [ 2.372422] mptsas 0001:6b:00.0: PCI INT A -> Link[LXD2] -> GSI 43 (level, high) -> IRQ 43 [ 2.375023] mptbase: ioc0: Initiating bringup [ 2.375150] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 23 [ 2.375156] firewire_ohci 0000:01:05.0: PCI INT A -> Link[LNKA] -> GSI 23 (level, high) -> IRQ 23 [ 2.428079] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 2.928123] firewire_core: created device fw0: GUID 0060b00000240fb7, S400 [ 3.076021] ioc0: LSISAS1068E B1: Capabilities={Initiator} [ 3.076042] mptsas 0001:6b:00.0: setting latency timer to 64 [ 12.527476] scsi8 : ioc0: LSISAS1068E B1, FwRev=01103c00h, Ports=1, MaxQ=511, IRQ=43 [ 12.565958] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5000c500047f1d8d [ 12.566949] scsi 8:0:0:0: Direct-Access SEAGATE ST3146755SS HPS1 PQ: 0 ANSI: 5 [ 12.569407] sd 8:0:0:0: Attached scsi generic sg1 type 0 [ 12.590262] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c500047aa775 [ 12.592606] sd 8:0:0:0: [sda] 286749488 512-byte logical blocks: (146 GB/136 GiB) [ 12.593088] scsi 8:0:1:0: Direct-Access SEAGATE ST3146755SS HPS1 PQ: 0 ANSI: 5 [ 12.594633] sd 8:0:0:0: [sda] Write Protect is off [ 12.594637] sd 8:0:0:0: [sda] Mode Sense: db 00 10 08 [ 12.595510] sd 8:0:1:0: Attached scsi generic sg2 type 0 [ 12.618375] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 12.618663] sd 8:0:1:0: [sdb] 286749488 512-byte logical blocks: (146 GB/136 GiB) [ 12.641525] sd 8:0:1:0: [sdb] Write Protect is off [ 12.641528] sd 8:0:1:0: [sdb] Mode Sense: db 00 10 08 [ 12.643293] sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 12.669157] sdb: [ 12.688966] sda: sda1 sda2 < sda5 > [ 12.715957] sd 8:0:1:0: [sdb] Attached SCSI disk [ 12.716716] sd 8:0:0:0: [sda] Attached SCSI disk [ 14.018706] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 14.018711] vesafb: scrolling: redraw [ 14.018714] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 14.019591] vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90009800000, using 5120k, total 5120k [ 14.019771] Console: switching to colour frame buffer device 160x64 [ 14.019801] fb0: VESA VGA frame buffer device [ 14.272014] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.221651] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.221660] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.337004] Adding 4192252k swap on /dev/sda5. Priority:-1 extents:1 across:4192252k [ 17.454165] udevd[525]: starting version 175 [ 19.762419] lp: driver loaded but no devices found [ 19.843929] wmi: Mapper loaded [ 19.860167] tpm_tis: probe of 00:0b failed with error -5 [ 19.948689] tpm_inf_pnp 00:0b: Found TPM with ID IFX0102 [ 19.948742] tpm_inf_pnp 00:0b: TPM found: config base 0x4e, data base 0x4c0, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 20.034463] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 20.037971] MCE: In-kernel MCE decoding enabled. [ 20.336314] i2c i2c-0: nForce2 SMBus adapter at 0x4000 [ 20.336374] i2c i2c-1: nForce2 SMBus adapter at 0x4040 [ 20.339116] i2c i2c-2: nForce2 SMBus adapter at 0x2000 [ 20.339165] i2c i2c-3: nForce2 SMBus adapter at 0x2040 [ 20.355064] NV_TCO: NV TCO WatchDog Timer Driver v0.01 [ 20.355155] NV_TCO: Watchdog reboot detected. [ 20.355809] NV_TCO: initialized (0xf940). heartbeat=30 sec (nowayout=0) [ 20.372998] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 20.380772] EDAC MC: Ver: 2.1.0 [ 20.476250] input: HP WMI hotkeys as /devices/virtual/input/input5 [ 20.513136] AMD64 EDAC driver v3.4.0 [ 20.524071] EDAC amd64: DRAM ECC enabled. [ 20.524082] EDAC amd64: K8 revF or later detected (node 0). [ 20.524101] EDAC MC: DCT0 chip selects: [ 20.524103] EDAC amd64: MC: 0: 4096MB 1: 0MB [ 20.524105] EDAC amd64: MC: 2: 4096MB 3: 0MB [ 20.524107] EDAC amd64: MC: 4: 0MB 5: 0MB [ 20.524108] EDAC amd64: MC: 6: 0MB 7: 0MB [ 20.524156] EDAC amd64: CS0: Registered DDR2 RAM [ 20.524158] EDAC amd64: CS2: Registered DDR2 RAM [ 20.524187] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2 [ 20.524318] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 20.762948] type=1400 audit(1342708302.483:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=823 comm="apparmor_parser" [ 20.763020] type=1400 audit(1342708302.483:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=823 comm="apparmor_parser" [ 20.763076] type=1400 audit(1342708302.483:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=823 comm="apparmor_parser" [ 20.988141] type=1400 audit(1342708302.711:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=825 comm="apparmor_parser" [ 20.988223] type=1400 audit(1342708302.711:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=825 comm="apparmor_parser" [ 20.988279] type=1400 audit(1342708302.711:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=825 comm="apparmor_parser" [ 21.012838] type=1400 audit(1342708302.735:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=769 comm="apparmor_parser" [ 21.012916] type=1400 audit(1342708302.735:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=769 comm="apparmor_parser" [ 21.012975] type=1400 audit(1342708302.735:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=769 comm="apparmor_parser" [ 21.156594] nvidia: module license 'NVIDIA' taints kernel. [ 21.156599] Disabling lock debugging due to kernel taint [ 21.397872] ACPI: PCI Interrupt Link [LXPB] enabled at IRQ 22 [ 21.397880] nvidia 0000:18:00.0: PCI INT A -> Link[LXPB] -> GSI 22 (level, high) -> IRQ 22 [ 21.397888] nvidia 0000:18:00.0: setting latency timer to 64 [ 21.397893] vgaarb: device changed decodes: PCI:0000:18:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 21.398148] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 [ 21.413984] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 21.413992] snd_hda_intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21 [ 21.413995] hda_intel: Disabling MSI [ 21.414026] snd_hda_intel 0000:00:06.1: setting latency timer to 64 [ 22.572498] hda_codec: ALC262: SKU not ready 0x411111f0 [ 22.580042] hda_codec: ALC262: BIOS auto-probing. [ 23.660127] input: HDA NVidia Line as /devices/pci0000:00/0000:00:06.1/sound/card0/input6 [ 23.660223] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input7 [ 23.660287] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input8 [ 23.660353] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input9 [ 23.660416] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:06.1/sound/card0/input10 [ 35.974486] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr [ 36.110400] RPC: Registered named UNIX socket transport module. [ 36.110404] RPC: Registered udp transport module. [ 36.110406] RPC: Registered tcp transport module. [ 36.110408] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 36.135982] FS-Cache: Loaded [ 36.279949] init: failsafe main process (1022) killed by TERM signal [ 36.382673] FS-Cache: Netfs 'nfs' registered for caching [ 36.732086] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 37.569407] ppdev: user-space parallel port driver [ 37.733842] type=1400 audit(1342708319.454:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1098 comm="apparmor_parser" [ 37.874988] type=1400 audit(1342708319.594:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1099 comm="apparmor_parser" [ 38.044745] Bluetooth: Core ver 2.16 [ 38.044781] NET: Registered protocol family 31 [ 38.044783] Bluetooth: HCI device and connection manager initialized [ 38.044787] Bluetooth: HCI socket layer initialized [ 38.044789] Bluetooth: L2CAP socket layer initialized [ 38.044805] Bluetooth: SCO socket layer initialized [ 38.208099] Bluetooth: RFCOMM TTY layer initialized [ 38.208107] Bluetooth: RFCOMM socket layer initialized [ 38.208109] Bluetooth: RFCOMM ver 1.11 [ 38.218347] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 38.218351] Bluetooth: BNEP filters: protocol multicast [ 38.429773] forcedeth 0000:00:08.0: irq 67 for MSI/MSI-X [ 38.429963] forcedeth 0000:00:08.0: eth0: no link during initialization [ 38.430985] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.442767] forcedeth 0000:00:09.0: irq 68 for MSI/MSI-X [ 38.545851] type=1400 audit(1342708320.266:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1136 comm="apparmor_parser" [ 38.546030] type=1400 audit(1342708320.266:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1136 comm="apparmor_parser" [ 38.546110] type=1400 audit(1342708320.266:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1136 comm="apparmor_parser" [ 38.808654] type=1400 audit(1342708320.530:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1132 comm="apparmor_parser" [ 38.809025] type=1400 audit(1342708320.530:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1132 comm="apparmor_parser" [ 39.969857] type=1400 audit(1342708321.690:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1161 comm="apparmor_parser" [ 39.970431] type=1400 audit(1342708321.690:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1161 comm="apparmor_parser" [ 39.976800] type=1400 audit(1342708321.698:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1215 comm="apparmor_parser" [ 48.864018] eth1: no IPv6 routers present [ 50.242067] audit_printk_skb: 12 callbacks suppressed [ 50.242071] type=1400 audit(1342708331.962:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1140 comm="apparmor_parser" [ 50.243337] type=1400 audit(1342708331.962:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1140 comm="apparmor_parser" [ 50.243708] type=1400 audit(1342708331.962:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1140 comm="apparmor_parser" [ 50.244720] type=1400 audit(1342708331.966:28): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1140 comm="apparmor_parser" [ 50.245591] type=1400 audit(1342708331.966:29): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1140 comm="apparmor_parser" [ 50.245969] type=1400 audit(1342708331.966:30): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1140 comm="apparmor_parser" [ 50.246671] type=1400 audit(1342708331.966:31): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1140 comm="apparmor_parser" [ 50.247231] type=1400 audit(1342708331.966:32): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1140 comm="apparmor_parser" [ 50.562246] init: alsa-restore main process (1290) terminated with status 99 [ 50.679659] init: kdm main process (1299) killed by TERM signal [ 50.681132] init: gdm main process (1314) killed by TERM signal