[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-112-generic (buildd@lcy01-02) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #159-Ubuntu SMP Fri Mar 3 15:26:07 UTC 2017 (Ubuntu 3.13.0-112.159-generic 3.13.11-ckt39) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-112-generic root=/dev/mapper/SRV--Web--vg-root ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfff2fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfff3000-0x00000000dfffafff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfffb000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019bffefff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: HP ProLiant DL360 G4p, BIOS P54 11/11/2005 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x19bfff max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdfff3 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4f60-0x000f4f6f] mapped at [ffff8800000f4f60] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x19bc00000-0x19bdfffff] [ 0.000000] [mem 0x19bc00000-0x19bdfffff] page 2M [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x198000000-0x19bbfffff] [ 0.000000] [mem 0x198000000-0x19bbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x180000000-0x197ffffff] [ 0.000000] [mem 0x180000000-0x197ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfff2fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfff2fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff] [ 0.000000] [mem 0x100000000-0x17fffffff] page 2M [ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE [ 0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x19be00000-0x19bffefff] [ 0.000000] [mem 0x19be00000-0x19bffefff] page 4k [ 0.000000] RAMDISK: [mem 0x357fa000-0x36bf4fff] [ 0.000000] ACPI: RSDP 00000000000f4ee0 000024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000dfff32c0 00004C (v01 HP P54 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI: FACP 00000000dfff3340 0000F4 (v03 HP P54 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131115/tbfadt-653) [ 0.000000] ACPI: DSDT 00000000dfff3440 001A6D (v01 HP DSDT 00000001 INTL 20030228) [ 0.000000] ACPI: FACS 00000000dfff3100 000040 [ 0.000000] ACPI: SPCR 00000000dfff3140 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: MCFG 00000000dfff31c0 00003C (v01 HP ProLiant 00000001 00000000) [ 0.000000] ACPI: APIC 00000000dfff3200 0000B6 (v01 HP 00000083 00000002 00000000) [ 0.000000] ACPI: SSDT 00000000dfff8000 0004C9 (v01 HP SSDTP 00000001 INTL 20030228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019bffefff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19bffefff] [ 0.000000] NODE_DATA [mem 0x19bffa000-0x19bffefff] [ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880195400000-ffff88019b3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x19bffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfff2fff] [ 0.000000] node 0: [mem 0x100000000-0x19bffefff] [ 0.000000] On node 0 totalpages: 1556368 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14272 pages used for memmap [ 0.000000] DMA32 zone: 913395 pages, LIFO batch:31 [ 0.000000] Normal zone: 9984 pages used for memmap [ 0.000000] Normal zone: 638975 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec10000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec82000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec82000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xfec82400] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 11, version 32, address 0xfec82400, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 112 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfff3000-0xdfffafff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffb000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88019ba00000 s81536 r8192 d20864 u262144 [ 0.000000] pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1532027 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-112-generic root=/dev/mapper/SRV--Web--vg-root ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 6023128K/6225472K available (7432K kernel code, 1147K rwdata, 3424K rodata, 1340K init, 1448K bss, 202344K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:1968 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 25165824 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3800.125 MHz processor [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 7600.25 BogoMIPS (lpj=15200500) [ 0.004014] pid_max: default: 32768 minimum: 301 [ 0.004068] Security Framework initialized [ 0.004114] AppArmor: AppArmor initialized [ 0.004119] Yama: becoming mindful. [ 0.005233] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.013573] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.016519] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.016549] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.017095] Initializing cgroup subsys memory [ 0.017110] Initializing cgroup subsys devices [ 0.017115] Initializing cgroup subsys freezer [ 0.017120] Initializing cgroup subsys blkio [ 0.017124] Initializing cgroup subsys perf_event [ 0.017129] Initializing cgroup subsys hugetlb [ 0.017168] CPU: Physical Processor ID: 0 [ 0.017173] CPU: Processor Core ID: 0 [ 0.017177] mce: CPU supports 4 MCE banks [ 0.017193] CPU0: Thermal monitoring enabled (TM1) [ 0.017200] process: using mwait in idle threads [ 0.017208] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64 tlb_flushall_shift: 6 [ 0.017313] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000) [ 0.018691] ACPI: Core revision 20131115 [ 0.020245] ACPI: All ACPI Tables successfully acquired [ 0.020394] ftrace: allocating 28674 entries in 113 pages [ 0.032791] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072588] smpboot: CPU0: Intel(R) Xeon(TM) CPU 3.80GHz (fam: 0f, model: 04, stepping: 03) [ 0.076000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.076000] ... version: 0 [ 0.076000] ... bit width: 40 [ 0.076000] ... generic registers: 18 [ 0.076000] ... value mask: 000000ffffffffff [ 0.076000] ... max period: 0000007fffffffff [ 0.076000] ... fixed-purpose events: 0 [ 0.076000] ... event mask: 000000000003ffff [ 0.076000] x86: Booting SMP configuration: [ 0.085749] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.076000] .... node #0, CPUs: #1 #2 #3 [ 0.194635] x86: Booted up 1 node, 4 CPUs [ 0.194646] smpboot: Total of 4 processors activated (30402.14 BogoMIPS) [ 0.196242] devtmpfs: initialized [ 0.201156] EVM: security.selinux [ 0.201161] EVM: security.SMACK64 [ 0.201164] EVM: security.ima [ 0.201166] EVM: security.capability [ 0.201191] pinctrl core: initialized pinctrl subsystem [ 0.201224] regulator-dummy: no parameters [ 0.201260] RTC time: 9:33:18, date: 03/17/17 [ 0.201320] NET: Registered protocol family 16 [ 0.201487] cpuidle: using governor ladder [ 0.201492] cpuidle: using governor menu [ 0.201527] ACPI: bus type PCI registered [ 0.201532] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.201620] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.201625] PCI: Intel Corporation E7520 Memory Controller Hub with MMCONFIG support [ 0.201634] PCI: not using MMCONFIG [ 0.201637] PCI: Using configuration type 1 for base access [ 0.201644] PCI: HP ProLiant DL360 detected, enabling pci=bfsort. [ 0.201885] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.201889] mtrr: probably your BIOS does not setup all CPUs. [ 0.201892] mtrr: corrected configuration. [ 0.204307] bio: create slab at 0 [ 0.204307] ACPI: Added _OSI(Module Device) [ 0.204307] ACPI: Added _OSI(Processor Device) [ 0.204307] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.204307] ACPI: Added _OSI(Processor Aggregator Device) [ 0.206046] ACPI: SSDT 00000000dfff9000 0002DA (v01 HP SSDT0 00000001 INTL 20030228) [ 0.206209] ACPI: Dynamic OEM Table Load: [ 0.206215] ACPI: SSDT (null) 0002DA (v01 HP SSDT0 00000001 INTL 20030228) [ 0.208136] ACPI: SSDT 00000000dfff9300 0002DA (v01 HP SSDT1 00000001 INTL 20030228) [ 0.208294] ACPI: Dynamic OEM Table Load: [ 0.208300] ACPI: SSDT (null) 0002DA (v01 HP SSDT1 00000001 INTL 20030228) [ 0.212160] ACPI: SSDT 00000000dfffa200 0002DA (v01 HP SSDT6 00000001 INTL 20030228) [ 0.212324] ACPI: Dynamic OEM Table Load: [ 0.212331] ACPI: SSDT (null) 0002DA (v01 HP SSDT6 00000001 INTL 20030228) [ 0.216150] ACPI: SSDT 00000000dfffa500 0002DA (v01 HP SSDT7 00000001 INTL 20030228) [ 0.216311] ACPI: Dynamic OEM Table Load: [ 0.216317] ACPI: SSDT (null) 0002DA (v01 HP SSDT7 00000001 INTL 20030228) [ 0.224143] ACPI: Interpreter enabled [ 0.224154] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.224163] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.224170] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580) [ 0.224188] ACPI: (supports S0 S4 S5) [ 0.224193] ACPI: Using IOAPIC for interrupt routing [ 0.224226] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.224303] ACPI: No dock devices found. [ 0.227468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) [ 0.227479] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.227488] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.227572] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.227576] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.227579] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.227581] acpi PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 0.227585] PCI: root bus 00: using default resources [ 0.227589] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.227708] PCI host bridge to bus 0000:00 [ 0.227715] pci_bus 0000:00: root bus resource [bus 00-7f] [ 0.227720] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.227724] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.227739] pci 0000:00:00.0: [8086:3590] type 00 class 0x060000 [ 0.227867] pci 0000:00:02.0: [8086:3595] type 01 class 0x060400 [ 0.227928] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.228014] pci 0000:00:04.0: [8086:3597] type 01 class 0x060400 [ 0.228073] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.228148] pci 0000:00:06.0: [8086:3599] type 01 class 0x060400 [ 0.228206] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.228311] pci 0000:00:1c.0: [8086:25ae] type 01 class 0x060400 [ 0.228422] pci 0000:00:1d.0: [8086:25a9] type 00 class 0x0c0300 [ 0.228469] pci 0000:00:1d.0: reg 0x20: [io 0x2000-0x201f] [ 0.228551] pci 0000:00:1d.1: [8086:25aa] type 00 class 0x0c0300 [ 0.228597] pci 0000:00:1d.1: reg 0x20: [io 0x2020-0x203f] [ 0.228678] pci 0000:00:1d.4: [8086:25ab] type 00 class 0x088000 [ 0.228692] pci 0000:00:1d.4: reg 0x10: [mem 0xfbef0000-0xfbef000f] [ 0.228805] pci 0000:00:1d.5: [8086:25ac] type 00 class 0x080020 [ 0.228948] pci 0000:00:1d.7: [8086:25ad] type 00 class 0x0c0320 [ 0.228971] pci 0000:00:1d.7: reg 0x10: [mem 0xfbee0000-0xfbee03ff] [ 0.229067] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.229134] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400 [ 0.229231] pci 0000:00:1f.0: [8086:25a1] type 00 class 0x060100 [ 0.229300] pci 0000:00:1f.0: quirk: [io 0x0900-0x097f] claimed by ICH4 ACPI/GPIO/TCO [ 0.229308] pci 0000:00:1f.0: quirk: [io 0x0800-0x083f] claimed by ICH4 GPIO [ 0.229373] pci 0000:00:1f.1: [8086:25a2] type 00 class 0x01018a [ 0.229390] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7] [ 0.229401] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7] [ 0.229412] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177] [ 0.229422] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377] [ 0.229434] pci 0000:00:1f.1: reg 0x20: [io 0x0500-0x050f] [ 0.229446] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff] [ 0.229570] pci 0000:00:02.0: PCI bridge to [bus 0d-0f] [ 0.229657] pci 0000:06:00.0: [8086:0329] type 01 class 0x060400 [ 0.229674] pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled [ 0.229735] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.229804] pci 0000:06:00.2: [8086:032a] type 01 class 0x060400 [ 0.229820] pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled [ 0.229881] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold [ 0.229945] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.229958] pci 0000:00:04.0: PCI bridge to [bus 06-0c] [ 0.230046] pci 0000:06:00.0: PCI bridge to [bus 07-09] [ 0.230138] pci 0000:06:00.2: PCI bridge to [bus 0a-0c] [ 0.230201] pci 0000:00:06.0: PCI bridge to [bus 03-05] [ 0.230271] pci 0000:02:01.0: [0e11:0046] type 00 class 0x010400 [ 0.230302] pci 0000:02:01.0: reg 0x10: [mem 0xfdff0000-0xfdff1fff 64bit] [ 0.230314] pci 0000:02:01.0: reg 0x18: [io 0x4000-0x40ff] [ 0.230332] pci 0000:02:01.0: reg 0x1c: [mem 0xfdf80000-0xfdfbffff 64bit] [ 0.230353] pci 0000:02:01.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.230406] pci 0000:02:01.0: supports D1 [ 0.230470] pci 0000:02:02.0: [14e4:1648] type 00 class 0x020000 [ 0.230497] pci 0000:02:02.0: reg 0x10: [mem 0xfdf70000-0xfdf7ffff 64bit] [ 0.230607] pci 0000:02:02.0: PME# supported from D3hot D3cold [ 0.230677] pci 0000:02:02.1: [14e4:1648] type 00 class 0x020000 [ 0.230704] pci 0000:02:02.1: reg 0x10: [mem 0xfdf60000-0xfdf6ffff 64bit] [ 0.230814] pci 0000:02:02.1: PME# supported from D3hot D3cold [ 0.230913] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.230920] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.230925] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.230992] pci 0000:01:03.0: [1002:4752] type 00 class 0x030000 [ 0.231010] pci 0000:01:03.0: reg 0x10: [mem 0xfc000000-0xfcffffff] [ 0.231022] pci 0000:01:03.0: reg 0x14: [io 0x3000-0x30ff] [ 0.231033] pci 0000:01:03.0: reg 0x18: [mem 0xfbff0000-0xfbff0fff] [ 0.231068] pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.231099] pci 0000:01:03.0: supports D1 D2 [ 0.231151] pci 0000:01:04.0: [0e11:b203] type 00 class 0x088000 [ 0.231169] pci 0000:01:04.0: reg 0x10: [io 0x1800-0x18ff] [ 0.231179] pci 0000:01:04.0: reg 0x14: [mem 0xfbfe0000-0xfbfe01ff] [ 0.231297] pci 0000:01:04.2: [0e11:b204] type 00 class 0x088000 [ 0.231317] pci 0000:01:04.2: reg 0x10: [io 0x3400-0x34ff] [ 0.231328] pci 0000:01:04.2: reg 0x14: [mem 0xfbfd0000-0xfbfd07ff] [ 0.231338] pci 0000:01:04.2: reg 0x18: [mem 0xfbfc0000-0xfbfc1fff] [ 0.231349] pci 0000:01:04.2: reg 0x1c: [mem 0xfbf00000-0xfbf7ffff] [ 0.231377] pci 0000:01:04.2: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.231407] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold [ 0.231494] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 0.231502] pci 0000:00:1e.0: bridge window [io 0x1000-0x3fff] [ 0.231507] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfcffffff] [ 0.231512] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.231515] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.231776] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) [ 0.231854] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled. [ 0.231933] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *7 10 11) [ 0.232024] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11) [ 0.232103] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. [ 0.232182] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) [ 0.232259] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 *7 10 11) [ 0.232335] ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11) [ 0.232481] ACPI: \_SB_.PCI0: notify handler is installed [ 0.232502] Found 1 acpi root devices [ 0.232605] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=none,locks=none [ 0.232605] vgaarb: loaded [ 0.232605] vgaarb: setting as boot device: PCI:0000:01:03.0 [ 0.232605] vgaarb: bridge control possible 0000:01:03.0 [ 0.232605] SCSI subsystem initialized [ 0.232605] libata version 3.00 loaded. [ 0.232605] ACPI: bus type USB registered [ 0.232605] usbcore: registered new interface driver usbfs [ 0.232605] usbcore: registered new interface driver hub [ 0.232605] usbcore: registered new device driver usb [ 0.232605] PCI: Using ACPI for IRQ routing [ 0.232605] PCI: pci_cache_line_size set to 64 bytes [ 0.232605] pci 0000:00:1d.0: address space collision: [io 0x2000-0x201f] conflicts with PCI Bus 0000:01 [io 0x1000-0x3fff] [ 0.232605] pci 0000:00:1d.1: address space collision: [io 0x2020-0x203f] conflicts with PCI Bus 0000:01 [io 0x1000-0x3fff] [ 0.232605] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.232605] e820: reserve RAM buffer [mem 0xdfff3000-0xdfffffff] [ 0.232605] e820: reserve RAM buffer [mem 0x19bfff000-0x19bffffff] [ 0.232605] NetLabel: Initializing [ 0.232605] NetLabel: domain hash size = 128 [ 0.232605] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.232605] NetLabel: unlabeled traffic allowed by default [ 0.232605] Switched to clocksource refined-jiffies [ 0.243602] AppArmor: AppArmor Filesystem Enabled [ 0.243653] pnp: PnP ACPI init [ 0.243680] ACPI: bus type PNP registered [ 0.243783] pnp 00:00: disabling [io 0x0010-0x001f] because it overlaps 0000:00:1d.0 BAR 4 [io 0x0000-0x001f] [ 0.243792] pnp 00:00: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:1d.1 BAR 4 [io 0x0000-0x001f] [ 0.243864] system 00:00: [io 0x0408-0x040f] has been reserved [ 0.243870] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.243875] system 00:00: [io 0x0700-0x071f] has been reserved [ 0.243881] system 00:00: [io 0x0800-0x083f] has been reserved [ 0.243885] system 00:00: [io 0x0900-0x097f] has been reserved [ 0.243894] system 00:00: [io 0x0c80-0x0c83] has been reserved [ 0.243898] system 00:00: [io 0x0cd4-0x0cd7] has been reserved [ 0.243902] system 00:00: [io 0x0f50-0x0f58] has been reserved [ 0.243907] system 00:00: [io 0x02f8-0x02ff] has been reserved [ 0.243912] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.243918] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.243936] pnp 00:01: [dma 7] [ 0.243966] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.244023] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.244076] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.244117] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.244156] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.244369] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.244517] pnp 00:07: [dma 2] [ 0.244559] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.244767] pnp: PnP ACPI: found 8 devices [ 0.244772] ACPI: bus type PNP unregistered [ 0.252825] Switched to clocksource acpi_pm [ 0.252890] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref] [ 0.252898] pci 0000:00:1e.0: BAR 15: assigned [mem 0xf0100000-0xf01fffff pref] [ 0.252904] pci 0000:00:1f.1: BAR 5: assigned [mem 0xf0200000-0xf02003ff] [ 0.252914] pci 0000:00:1d.0: BAR 4: assigned [io 0x5000-0x501f] [ 0.252922] pci 0000:00:1d.1: BAR 4: assigned [io 0x5020-0x503f] [ 0.252930] pci 0000:00:02.0: PCI bridge to [bus 0d-0f] [ 0.252943] pci 0000:06:00.0: PCI bridge to [bus 07-09] [ 0.252955] pci 0000:06:00.2: PCI bridge to [bus 0a-0c] [ 0.252967] pci 0000:00:04.0: PCI bridge to [bus 06-0c] [ 0.252978] pci 0000:00:06.0: PCI bridge to [bus 03-05] [ 0.252991] pci 0000:02:01.0: BAR 6: assigned [mem 0xf0000000-0xf003ffff pref] [ 0.252996] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.253002] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.253010] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.253016] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff pref] [ 0.253026] pci 0000:01:03.0: BAR 6: assigned [mem 0xf0100000-0xf011ffff pref] [ 0.253032] pci 0000:01:04.2: BAR 6: assigned [mem 0xf0120000-0xf012ffff pref] [ 0.253036] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.253041] pci 0000:00:1e.0: bridge window [io 0x1000-0x3fff] [ 0.253048] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfcffffff] [ 0.253054] pci 0000:00:1e.0: bridge window [mem 0xf0100000-0xf01fffff pref] [ 0.253064] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.253067] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.253071] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.253074] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.253077] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff pref] [ 0.253079] pci_bus 0000:01: resource 0 [io 0x1000-0x3fff] [ 0.253081] pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfcffffff] [ 0.253084] pci_bus 0000:01: resource 2 [mem 0xf0100000-0xf01fffff pref] [ 0.253086] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.253088] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff] [ 0.253137] NET: Registered protocol family 2 [ 0.253532] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.253956] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.254484] TCP: Hash tables configured (established 65536 bind 65536) [ 0.254561] TCP: reno registered [ 0.254585] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.254667] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.254870] NET: Registered protocol family 1 [ 0.254913] pci_bus 0000:06: writes to ASPM control bits will be ignored [ 0.255249] pci 0000:00:1d.5: disabled boot interrupts on device [8086:25ac] [ 0.255421] pci 0000:06:00.0: rerouting interrupts for [8086:0329] [ 0.255430] pci 0000:06:00.2: rerouting interrupts for [8086:032a] [ 0.255435] PCI: CLS 64 bytes, default 64 [ 0.255586] Trying to unpack rootfs image as initramfs... [ 0.688721] Freeing initrd memory: 20460K (ffff8800357fa000 - ffff880036bf5000) [ 0.688740] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.688745] software IO TLB [mem 0xdbff3000-0xdfff3000] (64MB) mapped at [ffff8800dbff3000-ffff8800dfff2fff] [ 0.689033] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.689197] microcode: CPU0 sig=0xf43, pf=0x1, revision=0x5 [ 0.689216] microcode: CPU1 sig=0xf43, pf=0x1, revision=0x5 [ 0.689231] microcode: CPU2 sig=0xf43, pf=0x1, revision=0x5 [ 0.689246] microcode: CPU3 sig=0xf43, pf=0x1, revision=0x5 [ 0.689365] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.689374] Scanning for low memory corruption every 60 seconds [ 0.689836] Initialise system trusted keyring [ 0.689893] audit: initializing netlink socket (disabled) [ 0.689916] type=2000 audit(1489743198.687:1): initialized [ 0.720057] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.721915] zbud: loaded [ 0.722155] VFS: Disk quotas dquot_6.5.2 [ 0.722219] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.722876] fuse init (API version 7.22) [ 0.722994] msgmni has been set to 11803 [ 0.723082] Key type big_key registered [ 0.723997] Key type asymmetric registered [ 0.724021] Asymmetric key parser 'x509' registered [ 0.724085] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.724171] io scheduler noop registered [ 0.724180] io scheduler deadline registered (default) [ 0.724232] io scheduler cfq registered [ 0.724716] ioapic: probe of 0000:00:1d.5 failed with error -22 [ 0.724729] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.724751] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.724811] vesafb: mode is 640x480x24, linelength=1920, pages=0 [ 0.724815] vesafb: scrolling: redraw [ 0.724819] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.727274] vesafb: framebuffer at 0xfc000000, mapped to 0xffffc90000e80000, using 960k, total 960k [ 0.735420] Console: switching to colour frame buffer device 80x30 [ 0.743598] fb0: VESA VGA frame buffer device [ 0.743807] ipmi message handler version 39.2 [ 0.744090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.744381] ACPI: Power Button [PWRF] [ 0.751137] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.757599] ACPI: Thermal Zone [THM0] (8 C) [ 0.763985] GHES: HEST is not enabled! [ 0.770352] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.797184] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.830161] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.845529] Linux agpgart interface v0.103 [ 0.854364] brd: module loaded [ 0.862283] loop: module loaded [ 0.869182] ata_piix 0000:00:1f.1: version 2.13 [ 0.869193] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.876465] scsi0 : ata_piix [ 0.883316] scsi1 : ata_piix [ 0.889995] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 [ 0.896963] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 [ 0.904205] libphy: Fixed MDIO Bus: probed [ 0.911105] tun: Universal TUN/TAP device driver, 1.6 [ 0.917846] tun: (C) 1999-2004 Max Krasnyansky [ 0.924707] PPP generic driver version 2.4.2 [ 0.931545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.938494] ehci-pci: EHCI PCI platform driver [ 0.945481] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.952267] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.965664] ehci-pci 0000:00:1d.7: debug port 1 [ 0.976392] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.976413] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbee0000 [ 0.992032] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.998701] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.005426] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.018663] usb usb1: Product: EHCI Host Controller [ 1.025446] usb usb1: Manufacturer: Linux 3.13.0-112-generic ehci_hcd [ 1.032236] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.039037] hub 1-0:1.0: USB hub found [ 1.045499] hub 1-0:1.0: 4 ports detected [ 1.051861] ehci-platform: EHCI generic platform driver [ 1.058052] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.064305] ohci-pci: OHCI PCI platform driver [ 1.064791] ata1.00: ATAPI: DW-224E, A.1K, max PIO4 [ 1.076859] ohci-platform: OHCI generic platform driver [ 1.080677] ata1.00: configured for PIO4 [ 1.089315] uhci_hcd: USB Universal Host Controller Interface driver [ 1.095866] scsi 0:0:0:0: CD-ROM TEAC DW-224E A.1K PQ: 0 ANSI: 5 [ 1.095960] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.095969] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.096106] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000 [ 1.096209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.096211] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.096212] usb usb2: Product: UHCI Host Controller [ 1.096214] usb usb2: Manufacturer: Linux 3.13.0-112-generic uhci_hcd [ 1.096216] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.096385] hub 2-0:1.0: USB hub found [ 1.096394] hub 2-0:1.0: 2 ports detected [ 1.096628] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.096633] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.096698] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005020 [ 1.096768] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.096771] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.096773] usb usb3: Product: UHCI Host Controller [ 1.096774] usb usb3: Manufacturer: Linux 3.13.0-112-generic uhci_hcd [ 1.096776] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.096938] hub 3-0:1.0: USB hub found [ 1.096946] hub 3-0:1.0: 2 ports detected [ 1.097155] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 1.288841] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.295721] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.296678] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.296681] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.297010] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.297447] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.322590] mousedev: PS/2 mouse device common for all mice [ 1.329320] rtc_cmos rtc_cmos: RTC can wake from S4 [ 1.335910] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.342403] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram [ 1.349052] device-mapper: uevent: version 1.0.3 [ 1.355564] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.368499] ledtrig-cpu: registered to indicate activity on CPUs [ 1.375320] TCP: cubic registered [ 1.382116] NET: Registered protocol family 10 [ 1.389116] NET: Registered protocol family 17 [ 1.395735] Key type dns_resolver registered [ 1.397203] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.415713] Loading compiled-in X.509 certificates [ 1.423527] Loaded X.509 cert 'Magrathea: Glacier signing key: f50a65a6eee1644cbc1c2ef17b37cf4f6d2b2119' [ 1.436804] registered taskstats version 1 [ 1.446563] Key type trusted registered [ 1.458025] Key type encrypted registered [ 1.464487] AppArmor: AppArmor sha1 policy hashing enabled [ 1.471036] IMA: No TPM chip found, activating TPM-bypass! [ 1.478052] regulator-dummy: disabling [ 1.484705] Magic number: 9:241:576 [ 1.491190] rtc_cmos rtc_cmos: setting system clock to 2017-03-17 09:33:19 UTC (1489743199) [ 1.505650] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.512402] EDD information not available. [ 1.519142] PM: Hibernation image not present or could not be loaded. [ 1.520819] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000) [ 1.534303] Write protecting the kernel read-only data: 12288k [ 1.541975] Freeing unused kernel memory: 748K (ffff880001745000 - ffff880001800000) [ 1.558213] Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000) [ 1.599970] systemd-udevd[128]: starting version 204 [ 1.640497] Floppy drive(s): fd0 is 1.44M [ 1.647626] pps_core: LinuxPPS API ver. 1 registered [ 1.647634] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.677897] HP CISS Driver (v 3.6.26) [ 1.679023] FDC 0 is a National Semiconductor PC87306 [ 1.679124] PTP clock support registered [ 1.700071] tsc: Refined TSC clocksource calibration: 3800.136 MHz [ 1.711131] tg3.c:v3.134 (Sep 16, 2013) [ 1.778171] tg3 0000:02:02.0 eth0: Tigon3 [partno(349321-001) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:16:35:3b:63:60 [ 1.793525] tg3 0000:02:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.809526] tg3 0000:02:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0] [ 1.825401] tg3 0000:02:02.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit] [ 1.833847] cciss 0000:02:01.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date. [ 1.904026] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 2.050588] cciss 0000:02:01.0: cciss0: <0x46> at PCI 0000:02:01.0 IRQ 24 using DAC [ 2.077055] usb 2-1: New USB device found, idVendor=049f, idProduct=0048 [ 2.085319] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.093428] usb 2-1: Product: Virtual Management Device [ 2.101598] usb 2-1: Manufacturer: HP [ 2.102155] cciss/c0d0: p1 p2 < p5 > [ 2.117795] scsi2 : cciss [ 2.133376] hidraw: raw HID events driver (C) Jiri Kosina [ 2.147236] usbcore: registered new interface driver usbhid [ 2.155235] usbhid: USB HID core driver [ 2.165163] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4 [ 2.181179] hid-generic 0003:049F:0048.0001: input,hidraw0: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:00:1d.0-1/input0 [ 2.207716] tg3 0000:02:02.1 eth1: Tigon3 [partno(349321-001) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:16:35:3b:63:5f [ 2.224046] tg3 0000:02:02.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 2.240729] tg3 0000:02:02.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.257413] tg3 0000:02:02.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit] [ 2.307345] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 2.330802] random: lvm urandom read with 43 bits of entropy available [ 2.395366] bio: create slab at 1 [ 2.708156] Switched to clocksource tsc [ 2.745431] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3 [ 2.809986] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 3.900511] init: plymouth-upstart-bridge main process (210) terminated with status 1 [ 3.917247] init: plymouth-upstart-bridge main process ended, respawning [ 3.930417] init: plymouth-upstart-bridge main process (225) terminated with status 1 [ 3.947297] init: plymouth-upstart-bridge main process ended, respawning [ 4.020316] random: nonblocking pool is initialized [ 4.607452] Adding 6225916k swap on /dev/mapper/SRV--Web--vg-swap_1. Priority:-1 extents:1 across:6225916k FS [ 4.855555] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 5.209780] EXT4-fs (cciss!c0d0p1): mounting ext2 file system using the ext4 subsystem [ 5.246960] EXT4-fs (cciss!c0d0p1): mounted filesystem without journal. Opts: (null) [ 6.536569] init: dbus pre-start process (365) terminated with status 127 [ 6.661253] systemd-udevd[389]: starting version 204 [ 7.193042] lp: driver loaded but no devices found [ 7.447393] intel_rng: FWH not detected [ 7.459018] EDAC MC: Ver: 3.0.0 [ 7.473951] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.477662] Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden [ 7.525011] ACPI Warning: 0x0000000000000928-0x000000000000092f SystemIO conflicts with Region \SGPE 1 (20131115/utaddress-251) [ 7.525025] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.525032] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized [ 7.525035] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 8.119266] type=1400 audit(1489743206.122:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=483 comm="apparmor_parser" [ 8.119277] type=1400 audit(1489743206.122:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser" [ 8.119283] type=1400 audit(1489743206.122:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser" [ 8.119534] type=1400 audit(1489743206.122:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=485 comm="apparmor_parser" [ 8.119554] type=1400 audit(1489743206.122:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=485 comm="apparmor_parser" [ 8.119562] type=1400 audit(1489743206.122:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=485 comm="apparmor_parser" [ 8.119579] type=1400 audit(1489743206.122:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=460 comm="apparmor_parser" [ 8.119600] type=1400 audit(1489743206.122:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=460 comm="apparmor_parser" [ 8.119613] type=1400 audit(1489743206.122:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=460 comm="apparmor_parser" [ 8.546467] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.191000] init: failsafe main process (507) killed by TERM signal [ 9.550157] type=1400 audit(1489743207.554:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=848 comm="apparmor_parser" [ 11.022114] tg3 0000:02:02.0 eth0: Link is up at 1000 Mbps, full duplex [ 11.022130] tg3 0000:02:02.0 eth0: Flow control is off for TX and off for RX [ 11.022165] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 40.204334] init: plymouth-upstart-bridge main process ended, respawning [ 316.237633] ip_tables: (C) 2000-2006 Netfilter Core Team [ 730.105244] audit_printk_skb: 21 callbacks suppressed [ 730.105251] type=1400 audit(1489743928.552:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/slapd" pid=3838 comm="apparmor_parser" [ 775.917605] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 775.960300] JFS: nTxBlock = 8192, nTxLock = 65536 [ 776.010084] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 776.082943] QNX4 filesystem 0.2.3 registered. [ 776.129832] xor: measuring software checksum speed [ 776.168015] prefetch64-sse: 3726.000 MB/sec [ 776.208015] generic_sse: 3680.000 MB/sec [ 776.208021] xor: using function: prefetch64-sse (3726.000 MB/sec) [ 776.284025] raid6: sse2x1 2015 MB/s [ 776.352027] raid6: sse2x2 2988 MB/s [ 776.420017] raid6: sse2x4 2867 MB/s [ 776.420023] raid6: using algorithm sse2x2 (2988 MB/s) [ 776.420028] raid6: using intx1 recovery algorithm [ 776.466438] bio: create slab at 2 [ 776.467524] Btrfs loaded [ 817.672159] type=1400 audit(1489744016.118:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/slapd" pid=17660 comm="apparmor_parser" [ 892.116874] type=1400 audit(1489744090.563:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/slapd" pid=21841 comm="apparmor_parser" [ 1363.481975] init: upstart-udev-bridge main process (364) terminated with status 1 [ 1363.482002] init: upstart-udev-bridge main process ended, respawning [ 1363.482220] init: upstart-file-bridge main process (411) terminated with status 1 [ 1363.482242] init: upstart-file-bridge main process ended, respawning [ 1363.482414] init: upstart-socket-bridge main process (546) terminated with status 1 [ 1363.482434] init: upstart-socket-bridge main process ended, respawning [ 1428.278008] init: cron main process (920) killed by TERM signal