[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-28-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 (Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff70000 (usable) [ 0.000000] BIOS-e820: 000000003ff70000 - 000000003ff7f000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff7f000 - 000000003ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3ff70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable [ 0.000000] 2 base 04FF80000 mask FFFF80000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ff70000 (usable) [ 0.000000] modified: 000000003ff70000 - 000000003ff7f000 (ACPI data) [ 0.000000] modified: 000000003ff7f000 - 000000003ff80000 (ACPI NVS) [ 0.000000] modified: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] modified: 000000004ff80000 - 0000000050000000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f839000 - 2ffd38b2 [ 0.000000] ACPI: RSDP 000f6fc0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 3ff7a803 0002C (v01 SONY K7 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 3ff7ef64 00074 (v01 SONY K7 06040000 PTL 000F4240) [ 0.000000] ACPI: DSDT 3ff7a82f 04735 (v01 SONY K7 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3ff7ffc0 00040 [ 0.000000] ACPI: BOOT 3ff7efd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e0ed8] TEXT DATA BSS ==> [0000100000 - 00008e0ed8] [ 0.000000] #4 [002f839000 - 002ffd38b2] RAMDISK ==> [002f839000 - 002ffd38b2] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008e1000 - 00008e4158] BRK ==> [00008e1000 - 00008e4158] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ff70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ff70 [ 0.000000] On node 0 totalpages: 261887 [ 0.000000] free_area_init_node: node 0, pgdat c079c8c0, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 271 pages used for memmap [ 0.000000] HighMem zone: 34403 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:aff80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic root=UUID=9ba8931e-9910-47da-ae76-fb5f397f406f ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5239680 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff70) [ 0.000000] Memory: 1016900k/1048000k available (4685k kernel code, 30080k reserved, 2125k data, 660k init, 138696k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a7000 - 0xc084c000 ( 660 kB) [ 0.000000] .data : 0xc05936e7 - 0xc07a6e88 (2125 kB) [ 0.000000] .text : 0xc0100000 - 0xc05936e7 (4685 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2791.046 MHz processor. [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5582.09 BogoMIPS (lpj=11164184) [ 0.004038] Security Framework initialized [ 0.004089] AppArmor: AppArmor initialized [ 0.004101] Mount-cache hash table entries: 512 [ 0.004337] Initializing cgroup subsys ns [ 0.004347] Initializing cgroup subsys cpuacct [ 0.004353] Initializing cgroup subsys memory [ 0.004368] Initializing cgroup subsys devices [ 0.004373] Initializing cgroup subsys freezer [ 0.004377] Initializing cgroup subsys net_cls [ 0.004418] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004423] CPU: L2 cache: 512K [ 0.004427] CPU: Hyper-Threading is disabled [ 0.004434] mce: CPU supports 4 MCE banks [ 0.004464] Performance Events: no PMU driver, software events only. [ 0.004475] Checking 'hlt' instruction... OK. [ 0.021185] SMP alternatives: switching to UP code [ 0.033141] Freeing SMP alternatives: 19k freed [ 0.033176] ACPI: Core revision 20090903 [ 0.046410] ACPI: setting ELCR to 0200 (from 0c00) [ 0.048017] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.048026] ftrace: allocating 21796 entries in 43 pages [ 0.052138] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.052144] weird, boot CPU (#0) not listed by the BIOS. [ 0.052147] SMP motherboard not detected. [ 0.052150] Local APIC not detected. Using dummy APIC emulation. [ 0.052153] SMP disabled [ 0.052417] Brought up 1 CPUs [ 0.052422] Total of 1 processors activated (5582.09 BogoMIPS). [ 0.052914] CPU0 attaching NULL sched-domain. [ 0.053140] devtmpfs: initialized [ 0.053610] regulator: core version 0.5 [ 0.053650] Time: 6:59:34 Date: 06/07/11 [ 0.053710] NET: Registered protocol family 16 [ 0.053877] EISA bus registered [ 0.053891] ACPI: bus type pci registered [ 0.054054] PCI: PCI BIOS revision 2.10 entry at 0xfd890, last bus=1 [ 0.054057] PCI: Using configuration type 1 for base access [ 0.056425] bio: create slab at 0 [ 0.057156] ACPI: EC: Look up EC in DSDT [ 0.060644] ACPI: Interpreter enabled [ 0.060651] ACPI: (supports S0 S3 S4 S5) [ 0.060676] ACPI: Using PIC for interrupt routing [ 0.068552] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.068733] ACPI: No dock devices found. [ 0.069724] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.069789] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.069795] pci 0000:00:00.0: reg 14 32bit mmio pref: [0xe0600000-0xe0600fff] [ 0.069870] pci 0000:00:03.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.069876] pci 0000:00:03.0: reg 14 io port: [0x00-0xff] [ 0.069906] pci 0000:00:03.0: PME# supported from D3hot D3cold [ 0.069911] pci 0000:00:03.0: PME# disabled [ 0.069937] pci 0000:00:04.0: reg 10 io port: [0x8400-0x84ff] [ 0.069944] pci 0000:00:04.0: reg 14 32bit mmio: [0xe0005000-0xe0005fff] [ 0.069974] pci 0000:00:04.0: supports D1 D2 [ 0.069976] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold [ 0.069980] pci 0000:00:04.0: PME# disabled [ 0.070028] pci 0000:00:06.0: quirk: region 8000-803f claimed by ali7101 ACPI [ 0.070032] pci 0000:00:06.0: quirk: region 8040-805f claimed by ali7101 SMB [ 0.070124] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x00ffff] [ 0.070185] pci 0000:00:0a.0: reg 10 32bit mmio: [0xe0006000-0xe0006fff] [ 0.070201] pci 0000:00:0a.0: supports D1 D2 [ 0.070204] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.070208] pci 0000:00:0a.0: PME# disabled [ 0.070237] pci 0000:00:0a.2: reg 10 32bit mmio: [0xe000b000-0xe000b7ff] [ 0.070243] pci 0000:00:0a.2: reg 14 32bit mmio: [0xe0000000-0xe0003fff] [ 0.070277] pci 0000:00:0a.2: supports D1 D2 [ 0.070279] pci 0000:00:0a.2: PME# supported from D0 D1 D2 D3hot [ 0.070283] pci 0000:00:0a.2: PME# disabled [ 0.070311] pci 0000:00:0a.3: reg 10 32bit mmio: [0xe0007000-0xe0007fff] [ 0.070345] pci 0000:00:0a.3: supports D1 D2 [ 0.070348] pci 0000:00:0a.3: PME# supported from D0 D1 D2 D3hot [ 0.070352] pci 0000:00:0a.3: PME# disabled [ 0.070384] pci 0000:00:0c.0: reg 10 32bit mmio: [0xe0009000-0xe0009fff] [ 0.070417] pci 0000:00:0c.0: supports D1 D2 [ 0.070419] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070423] pci 0000:00:0c.0: PME# disabled [ 0.070449] pci 0000:00:0c.1: reg 10 32bit mmio: [0xe000a000-0xe000afff] [ 0.070482] pci 0000:00:0c.1: supports D1 D2 [ 0.070484] pci 0000:00:0c.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070488] pci 0000:00:0c.1: PME# disabled [ 0.070514] pci 0000:00:0c.2: reg 10 32bit mmio: [0xe000b800-0xe000b8ff] [ 0.070547] pci 0000:00:0c.2: supports D1 D2 [ 0.070549] pci 0000:00:0c.2: PME# supported from D0 D1 D2 D3hot [ 0.070553] pci 0000:00:0c.2: PME# disabled [ 0.070601] pci 0000:00:0f.0: reg 20 io port: [0x8080-0x808f] [ 0.070648] pci 0000:00:12.0: reg 10 io port: [0x9000-0x90ff] [ 0.070655] pci 0000:00:12.0: reg 14 32bit mmio: [0xe000bc00-0xe000bdff] [ 0.070686] pci 0000:00:12.0: supports D1 D2 [ 0.070688] pci 0000:00:12.0: PME# supported from D1 D2 D3hot D3cold [ 0.070692] pci 0000:00:12.0: PME# disabled [ 0.070747] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.070753] pci 0000:01:05.0: reg 14 io port: [0xa000-0xa0ff] [ 0.070759] pci 0000:01:05.0: reg 18 32bit mmio: [0xe0300000-0xe030ffff] [ 0.070774] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.070792] pci 0000:01:05.0: supports D1 D2 [ 0.070823] pci 0000:00:01.0: bridge io port: [0xa000-0xafff] [ 0.070828] pci 0000:00:01.0: bridge 32bit mmio: [0xe0300000-0xe03fffff] [ 0.070832] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.070851] pci_bus 0000:00: on NUMA node 0 [ 0.070857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.070951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT] [ 0.074112] ACPI: PCI Interrupt Link [LNK0] (IRQs 4) *0, disabled. [ 0.074271] ACPI: PCI Interrupt Link [LNK1] (IRQs 3) *11 [ 0.074428] ACPI: PCI Interrupt Link [LNK2] (IRQs 10) *11 [ 0.074584] ACPI: PCI Interrupt Link [LNK3] (IRQs 11) *0, disabled. [ 0.074742] ACPI: PCI Interrupt Link [LNK4] (IRQs 6) *10 [ 0.074900] ACPI: PCI Interrupt Link [LNK5] (IRQs *11) [ 0.075058] ACPI: PCI Interrupt Link [LNK6] (IRQs 9) *0, disabled. [ 0.075216] ACPI: PCI Interrupt Link [LNK7] (IRQs 9) *11 [ 0.075374] ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 *11) [ 0.075534] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.075537] vgaarb: loaded [ 0.075722] SCSI subsystem initialized [ 0.075838] libata version 3.00 loaded. [ 0.075950] usbcore: registered new interface driver usbfs [ 0.075967] usbcore: registered new interface driver hub [ 0.076037] usbcore: registered new device driver usb [ 0.076228] ACPI: WMI: Mapper loaded [ 0.076231] PCI: Using ACPI for IRQ routing [ 0.076423] NetLabel: Initializing [ 0.076425] NetLabel: domain hash size = 128 [ 0.076427] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.076444] NetLabel: unlabeled traffic allowed by default [ 0.076510] Switching to clocksource tsc [ 0.079095] AppArmor: AppArmor Filesystem Enabled [ 0.079136] pnp: PnP ACPI init [ 0.079177] ACPI: bus type pnp registered [ 0.080330] pnp 00:05: io resource (0x80-0x80) overlaps 0000:00:03.0 BAR 1 (0x0-0xff), disabling [ 0.080335] pnp 00:05: io resource (0xb1-0xb3) overlaps 0000:00:03.0 BAR 1 (0x0-0xff), disabling [ 0.080339] pnp 00:05: io resource (0x92-0x92) overlaps 0000:00:03.0 BAR 1 (0x0-0xff), disabling [ 0.080343] pnp 00:05: io resource (0xb0-0xb0) overlaps 0000:00:03.0 BAR 1 (0x0-0xff), disabling [ 0.080347] pnp 00:05: io resource (0x2f-0x2f) overlaps 0000:00:03.0 BAR 1 (0x0-0xff), disabling [ 0.084469] pnp: PnP ACPI: found 10 devices [ 0.084473] ACPI: ACPI bus type pnp unregistered [ 0.084479] PnPBIOS: Disabled by ACPI PNP [ 0.084501] system 00:05: ioport range 0x40b-0x40b has been reserved [ 0.084504] system 00:05: ioport range 0x480-0x48f has been reserved [ 0.084508] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.084511] system 00:05: ioport range 0x4d6-0x4d6 has been reserved [ 0.084515] system 00:05: ioport range 0x8000-0x807f could not be reserved [ 0.084518] system 00:05: ioport range 0xfe00-0xfe01 has been reserved [ 0.084521] system 00:05: ioport range 0xfe10-0xfe11 has been reserved [ 0.084531] system 00:06: iomem range 0x0-0x9ffff could not be reserved [ 0.084535] system 00:06: iomem range 0xdc000-0xdffff could not be reserved [ 0.084539] system 00:06: iomem range 0xe0000-0xfffff could not be reserved [ 0.084542] system 00:06: iomem range 0x100000-0x3fffffff could not be reserved [ 0.084547] system 00:06: iomem range 0xfff80000-0xffffffff has been reserved [ 0.084550] system 00:06: iomem range 0xe0600000-0xe0600fff has been reserved [ 0.119354] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.119359] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.119364] pci 0000:00:01.0: MEM window: 0xe0300000-0xe03fffff [ 0.119368] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff [ 0.119374] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02 [ 0.119377] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff [ 0.119381] pci 0000:00:0a.0: IO window: 0x001800-0x0018ff [ 0.119385] pci 0000:00:0a.0: PREFETCH window: 0x50000000-0x53ffffff [ 0.119390] pci 0000:00:0a.0: MEM window: 0x54000000-0x57ffffff [ 0.119470] pci 0000:00:0a.0: power state changed by ACPI to D0 [ 0.119504] pci 0000:00:0a.0: power state changed by ACPI to D0 [ 0.119724] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 4 [ 0.119728] PCI: setting IRQ 4 as level-triggered [ 0.119733] pci 0000:00:0a.0: PCI INT A -> Link[LNK0] -> GSI 4 (level, low) -> IRQ 4 [ 0.119741] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.119744] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.119748] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.119750] pci_bus 0000:01: resource 1 mem: [0xe0300000-0xe03fffff] [ 0.119754] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] [ 0.119757] pci_bus 0000:02: resource 0 io: [0x1400-0x14ff] [ 0.119760] pci_bus 0000:02: resource 1 io: [0x1800-0x18ff] [ 0.119763] pci_bus 0000:02: resource 2 pref mem [0x50000000-0x53ffffff] [ 0.119766] pci_bus 0000:02: resource 3 mem: [0x54000000-0x57ffffff] [ 0.119821] NET: Registered protocol family 2 [ 0.119953] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.120425] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.121922] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.122888] TCP: Hash tables configured (established 131072 bind 65536) [ 0.122894] TCP reno registered [ 0.123144] NET: Registered protocol family 1 [ 0.123217] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 0.123290] pci 0000:01:05.0: Boot video device [ 0.123542] Simple Boot Flag at 0x35 set to 0x1 [ 0.123689] cpufreq-nforce2: No nForce2 chipset. [ 0.123727] Scanning for low memory corruption every 60 seconds [ 0.123884] audit: initializing netlink socket (disabled) [ 0.123906] type=2000 audit(1307429974.123:1): initialized [ 0.132967] Trying to unpack rootfs image as initramfs... [ 0.143815] highmem bounce pool size: 64 pages [ 0.143825] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.151705] VFS: Disk quotas dquot_6.5.2 [ 0.151845] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.152682] fuse init (API version 7.13) [ 0.152809] msgmni has been set to 1716 [ 0.153118] alg: No test for stdrng (krng) [ 0.153209] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.153214] io scheduler noop registered [ 0.153216] io scheduler anticipatory registered [ 0.153218] io scheduler deadline registered [ 0.153272] io scheduler cfq registered (default) [ 0.153430] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.153463] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.155660] ACPI: AC Adapter [ACAD] (on-line) [ 0.155771] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.155778] ACPI: Sleep Button [SBTN] [ 0.155831] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.155834] ACPI: Power Button [PBTN] [ 0.155914] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.156050] ACPI: Lid Switch [LID] [ 0.156109] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.156113] ACPI: Power Button [PWRF] [ 0.156428] Marking TSC unstable due to TSC halts in idle [ 0.156491] processor LNXCPU:00: registered as cooling_device0 [ 0.163775] Switching to clocksource acpi_pm [ 0.167553] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.167571] ACPI: Thermal Zone [TZ01] (65 C) [ 0.169831] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.170266] serial 0000:00:03.0: enabling device (0000 -> 0003) [ 0.170548] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 9 [ 0.170552] PCI: setting IRQ 9 as level-triggered [ 0.170557] serial 0000:00:03.0: PCI INT A -> Link[LNK6] -> GSI 9 (level, low) -> IRQ 9 [ 0.170563] serial 0000:00:03.0: PCI INT A disabled [ 0.171850] brd: module loaded [ 0.176757] isapnp: Scanning for PnP cards... [ 0.182960] loop: module loaded [ 0.183172] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.184123] pata_acpi 0000:00:0f.0: can't derive routing for PCI INT A [ 0.184250] pata_acpi 0000:00:0f.0: can't derive routing for PCI INT A [ 0.184903] Fixed MDIO Bus: probed [ 0.184955] PPP generic driver version 2.4.2 [ 0.185041] tun: Universal TUN/TAP device driver, 1.6 [ 0.185044] tun: (C) 1999-2004 Max Krasnyansky [ 0.185167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.185245] ehci_hcd 0000:00:0c.2: power state changed by ACPI to D0 [ 0.185281] ehci_hcd 0000:00:0c.2: power state changed by ACPI to D0 [ 0.185517] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11 [ 0.185521] PCI: setting IRQ 11 as level-triggered [ 0.185527] ehci_hcd 0000:00:0c.2: PCI INT C -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11 [ 0.185554] ehci_hcd 0000:00:0c.2: EHCI Host Controller [ 0.185607] ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1 [ 0.232373] ehci_hcd 0000:00:0c.2: irq 11, io mem 0xe000b800 [ 0.244238] ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 1.00 [ 0.244488] usb usb1: configuration #1 chosen from 1 choice [ 0.244532] hub 1-0:1.0: USB hub found [ 0.244553] hub 1-0:1.0: 5 ports detected [ 0.244647] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.244750] ohci_hcd 0000:00:0c.0: power state changed by ACPI to D0 [ 0.244788] ohci_hcd 0000:00:0c.0: power state changed by ACPI to D0 [ 0.245021] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10 [ 0.245025] PCI: setting IRQ 10 as level-triggered [ 0.245031] ohci_hcd 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10 [ 0.245061] ohci_hcd 0000:00:0c.0: OHCI Host Controller [ 0.245137] ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2 [ 0.245167] ohci_hcd 0000:00:0c.0: irq 10, io mem 0xe0009000 [ 0.383154] usb usb2: configuration #1 chosen from 1 choice [ 0.383202] hub 2-0:1.0: USB hub found [ 0.383280] hub 2-0:1.0: 3 ports detected [ 0.383727] ohci_hcd 0000:00:0c.1: power state changed by ACPI to D0 [ 0.383764] ohci_hcd 0000:00:0c.1: power state changed by ACPI to D0 [ 0.384902] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 6 [ 0.384907] PCI: setting IRQ 6 as level-triggered [ 0.384913] ohci_hcd 0000:00:0c.1: PCI INT B -> Link[LNK4] -> GSI 6 (level, low) -> IRQ 6 [ 0.384944] ohci_hcd 0000:00:0c.1: OHCI Host Controller [ 0.385065] ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3 [ 0.385095] ohci_hcd 0000:00:0c.1: irq 6, io mem 0xe000a000 [ 0.481366] ACPI: Battery Slot [BAT1] (battery present) [ 0.506259] usb usb3: configuration #1 chosen from 1 choice [ 0.506344] hub 3-0:1.0: USB hub found [ 0.506363] hub 3-0:1.0: 2 ports detected [ 0.506488] uhci_hcd: USB Universal Host Controller Interface driver [ 0.506778] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.530499] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.530512] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.532271] mice: PS/2 mouse device common for all mice [ 0.532504] rtc_cmos 00:02: RTC can wake from S4 [ 0.532568] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.532601] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.532777] device-mapper: uevent: version 1.0.3 [ 0.536395] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.536525] device-mapper: multipath: version 1.1.0 loaded [ 0.536530] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.581897] EISA: Probing bus 0 at eisa.0 [ 0.581908] Cannot allocate resource for EISA slot 1 [ 0.581937] Cannot allocate resource for EISA slot 8 [ 0.581940] EISA: Detected 0 cards. [ 0.584563] cpuidle: using governor ladder [ 0.584627] cpuidle: using governor menu [ 0.585206] TCP cubic registered [ 0.585370] NET: Registered protocol family 10 [ 0.585953] lo: Disabled Privacy Extensions [ 0.586500] NET: Registered protocol family 17 [ 0.586590] Using IPI No-Shortcut mode [ 0.586751] PM: Resume from disk failed. [ 0.586773] registered taskstats version 1 [ 0.587048] Magic number: 15:600:973 [ 0.587205] rtc_cmos 00:02: setting system clock to 2011-06-07 06:59:34 UTC (1307429974) [ 0.587209] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.587211] EDD information not available. [ 0.602751] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.791477] Freeing initrd memory: 7786k freed [ 0.893820] isapnp: No Plug & Play device found [ 0.893857] Freeing unused kernel memory: 660k freed [ 0.895030] Write protecting the kernel text: 4688k [ 0.895063] Write protecting the kernel read-only data: 1844k [ 0.929444] udev: starting version 151 [ 1.257821] pata_ali 0000:00:0f.0: can't derive routing for PCI INT A [ 1.258554] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.258592] scsi0 : pata_ali [ 1.264080] scsi1 : pata_ali [ 1.265251] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8080 irq 14 [ 1.265256] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15 [ 1.265517] 8139cp 0000:00:12.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.265889] ohci1394 0000:00:0a.2: PCI INT C -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10 [ 1.320099] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e000b000-e000b7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.428562] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100 [ 1.428567] ata1.00: 156301488 sectors, multi 16: LBA48 [ 1.444471] ata1.00: configured for UDMA/100 [ 1.444658] scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4O PQ: 0 ANSI: 5 [ 1.444914] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.445421] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.445485] sd 0:0:0:0: [sda] Write Protect is off [ 1.445489] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.445520] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.445734] sda: sda1 sda4 < sda5 sda6 sda7 > [ 1.526291] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.608411] ata2.00: ATAPI: MATSHITAUJ-820D, 1.00, max UDMA/33 [ 1.608439] ata2.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 1.608442] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 1.624321] ata2.00: configured for UDMA/33 [ 1.626534] scsi 1:0:0:0: CD-ROM MATSHITA UJ-820D 1.00 PQ: 0 ANSI: 5 [ 1.631162] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.631168] Uniform CD-ROM driver Revision: 3.20 [ 1.631357] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.631478] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.635633] 8139too Fast Ethernet driver 0.9.28 [ 1.635979] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 3 [ 1.635983] PCI: setting IRQ 3 as level-triggered [ 1.635989] 8139too 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 3 (level, low) -> IRQ 3 [ 1.644681] eth0: RealTek RTL8139 at 0x9000, 08:00:46:cf:b3:1a, IRQ 3 [ 2.126535] kjournald starting. Commit interval 5 seconds [ 2.126553] EXT3-fs: mounted filesystem with ordered data mode. [ 2.592234] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030199fb5d] [ 4.514535] Adding 999416k swap on /dev/sda6. Priority:-1 extents:1 across:999416k [ 4.912420] EXT3 FS on sda7, internal journal [ 4.920206] udev: starting version 151 [ 6.588456] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 [ 6.588463] tifm_7xx1 0000:00:0a.3: PCI INT D -> Link[LNK3] -> GSI 11 (level, low) -> IRQ 11 [ 6.612054] tifm_core: MMC/SD card detected in socket 0:0 [ 7.370279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.374486] sony-laptop: Sony Notebook Control Driver v0.6. [ 7.374620] Linux agpgart interface v0.103 [ 7.379427] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/SNY5001:00/input/input6 [ 7.380275] input: Sony Vaio Jogdial as /devices/virtual/input/input7 [ 7.411883] lp: driver loaded but no devices found [ 7.450710] agpgart-ati 0000:00:00.0: Ati IGP345M chipset [ 7.450840] reserve_ram_pages_type failed 0x2e753000-0x2e754000, track 0x10, req 0x10 [ 7.451211] reserve_ram_pages_type failed 0x2e094000-0x2e095000, track 0x10, req 0x10 [ 7.451570] reserve_ram_pages_type failed 0x2e0e0000-0x2e0e1000, track 0x10, req 0x10 [ 7.451928] reserve_ram_pages_type failed 0x2e0dd000-0x2e0de000, track 0x10, req 0x10 [ 7.452352] reserve_ram_pages_type failed 0x2e12a000-0x2e12b000, track 0x10, req 0x10 [ 7.452710] reserve_ram_pages_type failed 0x2e1d2000-0x2e1d3000, track 0x10, req 0x10 [ 7.453067] reserve_ram_pages_type failed 0x2e0f9000-0x2e0fa000, track 0x10, req 0x10 [ 7.453425] reserve_ram_pages_type failed 0x2e7d5000-0x2e7d6000, track 0x10, req 0x10 [ 7.453782] reserve_ram_pages_type failed 0x2e755000-0x2e756000, track 0x10, req 0x10 [ 7.454140] reserve_ram_pages_type failed 0x2e7d6000-0x2e7d7000, track 0x10, req 0x10 [ 7.454498] reserve_ram_pages_type failed 0x2e09f000-0x2e0a0000, track 0x10, req 0x10 [ 7.454856] reserve_ram_pages_type failed 0x2e0a9000-0x2e0aa000, track 0x10, req 0x10 [ 7.455214] reserve_ram_pages_type failed 0x2e096000-0x2e097000, track 0x10, req 0x10 [ 7.455572] reserve_ram_pages_type failed 0x2e064000-0x2e065000, track 0x10, req 0x10 [ 7.455930] reserve_ram_pages_type failed 0x2e0ae000-0x2e0af000, track 0x10, req 0x10 [ 7.456692] reserve_ram_pages_type failed 0x2e085000-0x2e086000, track 0x10, req 0x10 [ 7.457051] reserve_ram_pages_type failed 0x2e0f8000-0x2e0f9000, track 0x10, req 0x10 [ 7.457409] reserve_ram_pages_type failed 0x2e791000-0x2e792000, track 0x10, req 0x10 [ 7.457766] reserve_ram_pages_type failed 0x2e02a000-0x2e02b000, track 0x10, req 0x10 [ 7.458128] reserve_ram_pages_type failed 0x2e1d1000-0x2e1d2000, track 0x10, req 0x10 [ 7.458495] reserve_ram_pages_type failed 0x2e1c9000-0x2e1ca000, track 0x10, req 0x10 [ 7.458863] reserve_ram_pages_type failed 0x2e1d0000-0x2e1d1000, track 0x10, req 0x10 [ 7.459230] reserve_ram_pages_type failed 0x2e1c8000-0x2e1c9000, track 0x10, req 0x10 [ 7.468115] reserve_ram_pages_type failed 0x2e1c6000-0x2e1c7000, track 0x10, req 0x10 [ 7.468477] reserve_ram_pages_type failed 0x2e0e1000-0x2e0e2000, track 0x10, req 0x10 [ 7.468835] reserve_ram_pages_type failed 0x2e79b000-0x2e79c000, track 0x10, req 0x10 [ 7.469193] reserve_ram_pages_type failed 0x2e79f000-0x2e7a0000, track 0x10, req 0x10 [ 7.469550] reserve_ram_pages_type failed 0x2e088000-0x2e089000, track 0x10, req 0x10 [ 7.469908] reserve_ram_pages_type failed 0x2e1c7000-0x2e1c8000, track 0x10, req 0x10 [ 7.470266] reserve_ram_pages_type failed 0x2e75a000-0x2e75b000, track 0x10, req 0x10 [ 7.470624] reserve_ram_pages_type failed 0x2e1dc000-0x2e1dd000, track 0x10, req 0x10 [ 7.470981] reserve_ram_pages_type failed 0x2e0b0000-0x2e0b1000, track 0x10, req 0x10 [ 7.471339] reserve_ram_pages_type failed 0x2e1de000-0x2e1df000, track 0x10, req 0x10 [ 7.485196] agpgart-ati 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 7.586875] type=1505 audit(1307422781.499:2): operation="profile_load" pid=468 name="/sbin/dhclient3" [ 7.587472] type=1505 audit(1307422781.499:3): operation="profile_load" pid=468 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.587809] type=1505 audit(1307422781.499:4): operation="profile_load" pid=468 name="/usr/lib/connman/scripts/dhclient-script" [ 7.588372] type=1505 audit(1307422781.500:5): operation="profile_replace" pid=456 name="/sbin/dhclient3" [ 7.588988] type=1505 audit(1307422781.500:6): operation="profile_replace" pid=456 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.589329] type=1505 audit(1307422781.500:7): operation="profile_replace" pid=456 name="/usr/lib/connman/scripts/dhclient-script" [ 7.612411] parport_pc 00:09: reported by Plug and Play ACPI [ 7.612482] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 7.709136] lp0: using parport0 (interrupt-driven). [ 7.882134] ppdev: user-space parallel port driver [ 7.894639] yenta_cardbus 0000:00:0a.0: CardBus bridge found [104d:8175] [ 7.894659] yenta_cardbus 0000:00:0a.0: Using CSCINT to route CSC interrupts to PCI [ 7.894662] yenta_cardbus 0000:00:0a.0: Routing CardBus interrupts to PCI [ 7.894667] yenta_cardbus 0000:00:0a.0: TI: mfunc 0x000a1b22, devctl 0x64 [ 8.124291] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0028, PCI irq 4 [ 8.124297] yenta_cardbus 0000:00:0a.0: Socket status: 30000820 [ 8.186086] cfg80211: Calling CRDA to update world regulatory domain [ 8.677044] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0xa04753/0x0 [ 8.720916] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 8.789010] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 8.789050] pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x0007ff] [ 8.802022] [drm] Initialized drm 1.1.0 20060810 [ 9.159442] cfg80211: World regulatory domain updated: [ 9.159449] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.159453] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.159457] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.159460] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.159464] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.159467] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.251940] [drm] radeon defaulting to kernel modesetting. [ 9.251944] [drm] radeon kernel modesetting enabled. [ 9.255468] radeon 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 4 (level, low) -> IRQ 4 [ 9.262360] [drm] radeon: Initializing kernel modesetting. [ 9.264230] [drm] register mmio base: 0xE0300000 [ 9.264234] [drm] register mmio size: 65536 [ 9.264578] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 9.264595] [drm] Generation 2 PCI interface, using max accessible memory [ 9.264610] agpgart-ati 0000:00:00.0: AGP 2.0 bridge [ 9.264632] agpgart-ati 0000:00:00.0: putting AGP V2 device into 1x mode [ 9.264689] radeon 0000:01:05.0: putting AGP V2 device into 1x mode [ 9.264696] [drm] radeon: VRAM 64M [ 9.264699] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF [ 9.264701] [drm] radeon: GTT 128M [ 9.264703] [drm] radeon: GTT from 0xE8000000 to 0xEFFFFFFF [ 9.264734] [drm] radeon: irq initialized. [ 9.264891] [drm] Detected VRAM RAM=64M, BAR=128M [ 9.264897] [drm] RAM width 128bits DDR [ 9.265891] [TTM] Zone kernel: Available graphics memory: 443620 kiB. [ 9.265895] [TTM] Zone highmem: Available graphics memory: 512968 kiB. [ 9.265922] [drm] radeon: 64M of VRAM memory ready [ 9.265925] [drm] radeon: 128M of GTT memory ready. [ 9.266170] [drm] radeon: cp idle (0x02000603) [ 9.266336] [drm] Loading R200 Microcode [ 9.266842] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 9.306101] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 9.308550] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 9.309445] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 9.310256] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 9.311297] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 9.324454] Initializing Nozomi driver 2.1d (build date: Jan 10 2011 21:42:33) [ 9.324510] nozomi 0000:02:00.0: Init, new card found [ 9.324524] nozomi 0000:02:00.0: enabling device (0000 -> 0002) [ 9.324539] nozomi 0000:02:00.0: PCI INT A -> Link[LNK0] -> GSI 4 (level, low) -> IRQ 4 [ 9.324546] nozomi 0000:02:00.0: Card type is: 2048 [ 9.324738] nozomi 0000:02:00.0: Version of card: 3 [ 9.324836] nozomi 0000:02:00.0: Initialization OK! [ 9.842735] [drm] radeon: ring at 0x00000000E8000000 [ 9.842763] [drm] ring test succeeded in 1 usecs [ 9.849452] [drm] radeon: ib pool ready. [ 9.849583] [drm] ib test succeeded in 0 usecs [ 9.851206] [drm] Panel ID String: 1024x768 [ 9.851211] [drm] Panel Size 1024x768 [ 9.851427] [drm] Default TV standard: NTSC [ 9.851431] [drm] 27.000000000 MHz TV ref clk [ 9.851435] [drm] Default TV standard: NTSC [ 9.851437] [drm] 27.000000000 MHz TV ref clk [ 9.851586] [drm] Radeon Display Connectors [ 9.851590] [drm] Connector 0: [ 9.851592] [drm] VGA [ 9.851595] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 9.851598] [drm] Encoders: [ 9.851600] [drm] CRT1: INTERNAL_DAC1 [ 9.851602] [drm] Connector 1: [ 9.851604] [drm] LVDS [ 9.851606] [drm] Encoders: [ 9.851608] [drm] LCD1: INTERNAL_LVDS [ 9.851610] [drm] Connector 2: [ 9.851611] [drm] S-video [ 9.851613] [drm] Encoders: [ 9.851615] [drm] TV1: INTERNAL_DAC2 [ 9.907137] [drm] fb mappable at 0xF0040000 [ 9.907142] [drm] vram apper at 0xF0000000 [ 9.907144] [drm] size 3145728 [ 9.907146] [drm] fb depth is 24 [ 9.907148] [drm] pitch is 4096 [ 9.920686] fb0: radeondrmfb frame buffer device [ 9.920691] registered panic notifier [ 9.920703] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 [ 9.967864] vga16fb: initializing [ 9.967872] vga16fb: mapped to 0xc00a0000 [ 9.967880] vga16fb: not registering due to another framebuffer present [ 10.179159] nozomi 0000:02:00.0: Device READY! [ 10.540839] ath5k 0000:00:09.0: enabling device (0000 -> 0002) [ 10.540854] ath5k 0000:00:09.0: PCI INT A -> Link[LNK3] -> GSI 11 (level, low) -> IRQ 11 [ 10.540933] ath5k 0000:00:09.0: registered as 'phy0' [ 10.993630] ath: EEPROM regdomain: 0x30 [ 10.993636] ath: EEPROM indicates we should expect a direct regpair map [ 10.993640] ath: Country alpha2 being used: AM [ 10.993643] ath: Regpair used: 0x30 [ 11.998747] Console: switching to colour frame buffer device 128x48 [ 12.488595] phy0: Selected rate control algorithm 'minstrel' [ 12.489540] ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) [ 12.489545] ath5k phy0: RF5112B 2GHz radio found (0x36) [ 12.490202] cfg80211: Calling CRDA for country: AM [ 12.490384] ALI 5451 0000:00:04.0: power state changed by ACPI to D0 [ 12.490418] ALI 5451 0000:00:04.0: power state changed by ACPI to D0 [ 12.490647] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 9 [ 12.490653] ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7] -> GSI 9 (level, low) -> IRQ 9 [ 12.519269] cfg80211: Regulatory domain changed to country: AM [ 12.519274] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.519278] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 12.519282] (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm) [ 12.519285] (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm) [ 13.808511] type=1505 audit(1307422787.720:8): operation="profile_load" pid=737 name="/usr/share/gdm/guest-session/Xsession" [ 13.813182] type=1505 audit(1307422787.724:9): operation="profile_replace" pid=738 name="/sbin/dhclient3" [ 13.813799] type=1505 audit(1307422787.724:10): operation="profile_replace" pid=738 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.814140] type=1505 audit(1307422787.724:11): operation="profile_replace" pid=738 name="/usr/lib/connman/scripts/dhclient-script" [ 14.099367] type=1505 audit(1307422788.008:12): operation="profile_load" pid=739 name="/usr/bin/evince" [ 14.108858] type=1505 audit(1307422788.020:13): operation="profile_load" pid=739 name="/usr/bin/evince-previewer" [ 14.114406] type=1505 audit(1307422788.024:14): operation="profile_load" pid=739 name="/usr/bin/evince-thumbnailer" [ 14.191108] type=1505 audit(1307422788.100:15): operation="profile_load" pid=741 name="/usr/lib/cups/backend/cups-pdf" [ 14.191849] type=1505 audit(1307422788.100:16): operation="profile_load" pid=741 name="/usr/sbin/cupsd" [ 14.250954] type=1505 audit(1307422788.160:17): operation="profile_load" pid=742 name="/usr/sbin/tcpdump" [ 14.646155] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.664432] eth0: link down [ 14.664643] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.496040] AC'97 1 does not respond - RESET [ 15.512039] AC'97 1 access is not valid [0xffffffff], removing mixer. [ 15.512253] ali mixer 1 creating error. [ 71.149102] PPP BSD Compression module registered [ 71.171810] PPP Deflate Compression module registered