[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) [ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000005fff8000 - 0000000060000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: American Megatrends Inc. K7S41GX/K7S41GX, BIOS P2.80 10/18/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 base 0D0000000 mask FFC000000 write-combining [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fbc70] fbc70 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 36782000 - 373b9000 [ 0.000000] ACPI: RSDP 000faa40 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 5fff0000 0002C (v01 AMIINT SiS740XX 00001000 MSFT 0100000B) [ 0.000000] ACPI: FACP 5fff0030 00081 (v01 AMIINT SiS740XX 00000011 MSFT 0100000B) [ 0.000000] ACPI: DSDT 5fff0120 03300 (v01 SiS 746 00000100 INTL 02002024) [ 0.000000] ACPI: FACS 5fff8000 00040 [ 0.000000] ACPI: APIC 5fff00c0 0005A (v01 AMIINT SiS740XX 00001000 MSFT 0100000B) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 647MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005fff0 [ 0.000000] On node 0 totalpages: 393087 [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f5b82200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1296 pages used for memmap [ 0.000000] HighMem zone: 164578 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5400000 s28800 r0 d24448 u4194304 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390015 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=bbaa554f-f713-4477-af4f-05b43995a3f2 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7863680 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0005fff0) [ 0.000000] Memory: 1529620k/1572800k available (5188k kernel code, 42728k reserved, 2540k data, 700k init, 663496k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB) [ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f4806000 soft=f4808000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1593.770 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3187.54 BogoMIPS (lpj=6375080) [ 0.008016] pid_max: default: 32768 minimum: 301 [ 0.008071] Security Framework initialized [ 0.008126] AppArmor: AppArmor initialized [ 0.008130] Yama: becoming mindful. [ 0.008251] Mount-cache hash table entries: 512 [ 0.008537] Initializing cgroup subsys ns [ 0.008545] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.008552] Initializing cgroup subsys cpuacct [ 0.008561] Initializing cgroup subsys memory [ 0.008581] Initializing cgroup subsys devices [ 0.008587] Initializing cgroup subsys freezer [ 0.008592] Initializing cgroup subsys net_cls [ 0.008597] Initializing cgroup subsys blkio [ 0.008666] mce: CPU supports 4 MCE banks [ 0.009296] SMP alternatives: switching to UP code [ 0.019375] Freeing SMP alternatives: 20k freed [ 0.019418] ACPI: Core revision 20110112 [ 0.022842] ftrace: allocating 23640 entries in 47 pages [ 0.024185] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065959] CPU0: AMD Sempron(tm) 2300+ stepping 01 [ 0.068003] Performance Events: AMD PMU driver. [ 0.068003] ... version: 0 [ 0.068003] ... bit width: 48 [ 0.068003] ... generic registers: 4 [ 0.068003] ... value mask: 0000ffffffffffff [ 0.068003] ... max period: 00007fffffffffff [ 0.068003] ... fixed-purpose events: 0 [ 0.068003] ... event mask: 000000000000000f [ 0.068003] Brought up 1 CPUs [ 0.068003] Total of 1 processors activated (3187.54 BogoMIPS). [ 0.068003] devtmpfs: initialized [ 0.068003] print_constraints: dummy: [ 0.068003] Time: 21:46:14 Date: 05/02/11 [ 0.068003] NET: Registered protocol family 16 [ 0.068003] EISA bus registered [ 0.068003] ACPI: bus type pci registered [ 0.069483] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2 [ 0.069487] PCI: Using configuration type 1 for base access [ 0.071323] bio: create slab at 0 [ 0.072384] ACPI: EC: Look up EC in DSDT [ 0.076608] ACPI: Interpreter enabled [ 0.076617] ACPI: (supports S0 S1 S4 S5) [ 0.076648] ACPI: Using IOAPIC for interrupt routing [ 0.078186] ACPI: Power Resource [URP1] (off) [ 0.078978] ACPI: Power Resource [URP2] (off) [ 0.079053] ACPI: Power Resource [FDDP] (off) [ 0.079128] ACPI: Power Resource [LPTP] (off) [ 0.081577] ACPI: No dock devices found. [ 0.081581] HEST: Table not found. [ 0.081589] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.081715] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.081926] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.081931] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.081937] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.081941] pci_root PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff] (ignored) [ 0.081946] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xffdfffff] (ignored) [ 0.081951] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored) [ 0.081977] pci 0000:00:00.0: [1039:0741] type 0 class 0x000600 [ 0.081993] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd3ffffff] [ 0.082072] pci 0000:00:01.0: [1039:0003] type 1 class 0x000604 [ 0.082127] pci 0000:00:02.0: [1039:0008] type 0 class 0x000601 [ 0.082205] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.082230] pci 0000:00:02.1: [1039:0016] type 0 class 0x000c05 [ 0.082284] pci 0000:00:02.1: reg 20: [io 0x0c00-0x0c1f] [ 0.082331] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101 [ 0.082395] pci 0000:00:02.5: reg 20: [io 0xff00-0xff0f] [ 0.082445] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03 [ 0.082463] pci 0000:00:03.0: reg 10: [mem 0xcfffd000-0xcfffdfff] [ 0.082541] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03 [ 0.082558] pci 0000:00:03.1: reg 10: [mem 0xcfffe000-0xcfffefff] [ 0.082639] pci 0000:00:03.2: [1039:7002] type 0 class 0x000c03 [ 0.082660] pci 0000:00:03.2: reg 10: [mem 0xcffff000-0xcfffffff] [ 0.082736] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.082743] pci 0000:00:03.2: PME# disabled [ 0.082775] pci 0000:00:04.0: [1039:0900] type 0 class 0x000200 [ 0.082797] pci 0000:00:04.0: reg 10: [io 0xdc00-0xdcff] [ 0.082810] pci 0000:00:04.0: reg 14: [mem 0xcfffc000-0xcfffcfff] [ 0.082860] pci 0000:00:04.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.082884] pci 0000:00:04.0: supports D1 D2 [ 0.082887] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082893] pci 0000:00:04.0: PME# disabled [ 0.082924] pci 0000:00:09.0: [13f6:0111] type 0 class 0x000401 [ 0.082946] pci 0000:00:09.0: reg 10: [io 0xd800-0xd8ff] [ 0.083026] pci 0000:00:09.0: supports D1 D2 [ 0.083097] pci 0000:01:00.0: [10de:0171] type 0 class 0x000300 [ 0.083116] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff] [ 0.083128] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xc7ffffff pref] [ 0.083139] pci 0000:01:00.0: reg 18: [mem 0xcdb80000-0xcdbfffff pref] [ 0.083170] pci 0000:01:00.0: reg 30: [mem 0xcfee0000-0xcfefffff pref] [ 0.083233] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.083241] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.083248] pci 0000:00:01.0: bridge window [mem 0xcdd00000-0xcfefffff] [ 0.083255] pci 0000:00:01.0: bridge window [mem 0xbd900000-0xcdbfffff pref] [ 0.083267] pci_bus 0000:00: on NUMA node 0 [ 0.083272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.090987] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.091081] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 0.091167] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.091253] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.091342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.091431] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 0.091520] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.091606] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.091826] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.091831] vgaarb: loaded [ 0.092240] SCSI subsystem initialized [ 0.092375] libata version 3.00 loaded. [ 0.092469] usbcore: registered new interface driver usbfs [ 0.092491] usbcore: registered new interface driver hub [ 0.092544] usbcore: registered new device driver usb [ 0.092749] wmi: Mapper loaded [ 0.092752] PCI: Using ACPI for IRQ routing [ 0.092790] PCI: pci_cache_line_size set to 32 bytes [ 0.092850] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.092855] reserve RAM buffer: 000000005fff0000 - 000000005fffffff [ 0.093049] NetLabel: Initializing [ 0.093053] NetLabel: domain hash size = 128 [ 0.093055] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.093077] NetLabel: unlabeled traffic allowed by default [ 0.107207] AppArmor: AppArmor Filesystem Enabled [ 0.107283] pnp: PnP ACPI init [ 0.107318] ACPI: bus type pnp registered [ 0.107540] pnp 00:00: [bus 00-ff] [ 0.107546] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.107551] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.107555] pnp 00:00: [io 0x0d00-0xffff window] [ 0.107559] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.107564] pnp 00:00: [mem 0x000cb000-0x000dffff window] [ 0.107568] pnp 00:00: [mem 0x60000000-0xffdfffff window] [ 0.107572] pnp 00:00: [mem 0xfee01000-0xffdfffff window] [ 0.107660] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.107729] pnp 00:01: [io 0x0010-0x001f] [ 0.107734] pnp 00:01: [io 0x0022-0x003f] [ 0.107737] pnp 00:01: [io 0x0044-0x005f] [ 0.107741] pnp 00:01: [io 0x0062-0x0063] [ 0.107744] pnp 00:01: [io 0x0065-0x006f] [ 0.107748] pnp 00:01: [io 0x0072-0x007f] [ 0.107751] pnp 00:01: [io 0x0080] [ 0.107754] pnp 00:01: [io 0x0084-0x0086] [ 0.107758] pnp 00:01: [io 0x0088] [ 0.107761] pnp 00:01: [io 0x008c-0x008e] [ 0.107764] pnp 00:01: [io 0x0090-0x009f] [ 0.107768] pnp 00:01: [io 0x00a2-0x00bf] [ 0.107771] pnp 00:01: [io 0x00e0-0x00ef] [ 0.107774] pnp 00:01: [io 0x04d0-0x04d1] [ 0.107786] pnp 00:01: [io 0x0295-0x0296] [ 0.107790] pnp 00:01: [io 0x0800-0x087f] [ 0.107793] pnp 00:01: [io 0x0880-0x08ff] [ 0.107796] pnp 00:01: [io 0x0c00-0x0c1f] [ 0.107800] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.107888] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.107893] system 00:01: [io 0x0295-0x0296] has been reserved [ 0.107898] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.107902] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.107907] system 00:01: [io 0x0c00-0x0c1f] has been reserved [ 0.107912] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.107919] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107943] pnp 00:02: [dma 4] [ 0.107947] pnp 00:02: [io 0x0000-0x000f] [ 0.107951] pnp 00:02: [io 0x0081-0x0083] [ 0.107954] pnp 00:02: [io 0x0087] [ 0.107958] pnp 00:02: [io 0x0089-0x008b] [ 0.107961] pnp 00:02: [io 0x008f] [ 0.107964] pnp 00:02: [io 0x00c0-0x00df] [ 0.107968] pnp 00:02: [io 0x0481-0x0483] [ 0.107971] pnp 00:02: [io 0x0487] [ 0.107974] pnp 00:02: [io 0x0489-0x048b] [ 0.107978] pnp 00:02: [io 0x048f] [ 0.108052] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.108073] pnp 00:03: [io 0x0070-0x0071] [ 0.108096] pnp 00:03: [irq 8] [ 0.108149] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.108166] pnp 00:04: [io 0x0061] [ 0.108206] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.108223] pnp 00:05: [io 0x00f0-0x00ff] [ 0.108231] pnp 00:05: [irq 13] [ 0.108271] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.108333] pnp 00:06: [io 0x0060] [ 0.108337] pnp 00:06: [io 0x0064] [ 0.108345] pnp 00:06: [irq 1] [ 0.108388] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.108500] pnp 00:07: [io 0x03f2-0x03f3] [ 0.108504] pnp 00:07: [io 0x03f4-0x03f5] [ 0.108507] pnp 00:07: [io 0x03f7] [ 0.108515] pnp 00:07: [irq 6] [ 0.108518] pnp 00:07: [dma 2] [ 0.108595] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.108845] pnp 00:08: [io 0x03f8-0x03ff] [ 0.108853] pnp 00:08: [irq 4] [ 0.108948] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.109392] pnp 00:09: [io 0x0378-0x037f] [ 0.109397] pnp 00:09: [io 0x0778-0x077b] [ 0.109405] pnp 00:09: [irq 7] [ 0.109409] pnp 00:09: [dma 0] [ 0.109549] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.109752] pnp 00:0a: [io 0x0200-0x0207] [ 0.109808] pnp 00:0a: Plug and Play ACPI device, IDs PNPb02f (active) [ 0.110063] pnp: PnP ACPI: found 11 devices [ 0.110067] ACPI: ACPI bus type pnp unregistered [ 0.110073] PnPBIOS: Disabled by ACPI PNP [ 0.147830] Switching to clocksource acpi_pm [ 0.147879] pci 0000:00:04.0: address space collision: [mem 0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xfffc0000-0xffffffff] [ 0.147914] pci 0000:00:04.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref] [ 0.147921] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.147925] pci 0000:00:01.0: bridge window [io disabled] [ 0.147935] pci 0000:00:01.0: bridge window [mem 0xcdd00000-0xcfefffff] [ 0.147942] pci 0000:00:01.0: bridge window [mem 0xbd900000-0xcdbfffff pref] [ 0.147964] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.147969] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.147973] pci_bus 0000:01: resource 1 [mem 0xcdd00000-0xcfefffff] [ 0.147978] pci_bus 0000:01: resource 2 [mem 0xbd900000-0xcdbfffff pref] [ 0.147978] Switched to NOHz mode on CPU #0 [ 0.147978] NET: Registered protocol family 2 [ 0.147978] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.147978] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.147978] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.148243] TCP: Hash tables configured (established 131072 bind 65536) [ 0.148249] TCP reno registered [ 0.148257] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.148292] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.148486] NET: Registered protocol family 1 [ 0.148604] pci 0000:01:00.0: Boot video device [ 0.148609] PCI: CLS 32 bytes, default 32 [ 0.149057] cpufreq-nforce2: No nForce2 chipset. [ 0.149304] audit: initializing netlink socket (disabled) [ 0.149324] type=2000 audit(1304372773.144:1): initialized [ 0.163222] Trying to unpack rootfs image as initramfs... [ 0.184223] highmem bounce pool size: 64 pages [ 0.184244] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.192740] VFS: Disk quotas dquot_6.5.2 [ 0.192854] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.194040] fuse init (API version 7.16) [ 0.194192] msgmni has been set to 1691 [ 0.200661] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.200716] io scheduler noop registered [ 0.200720] io scheduler deadline registered [ 0.200743] io scheduler cfq registered (default) [ 0.200979] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.201025] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.201290] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.201302] ACPI: Power Button [PWRB] [ 0.201387] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.201393] ACPI: Power Button [PWRF] [ 0.201557] ACPI: acpi_idle registered with cpuidle [ 0.203167] ERST: Table is not found! [ 0.203423] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.223869] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.228177] isapnp: Scanning for PnP cards... [ 0.318444] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.340588] Linux agpgart interface v0.103 [ 0.342848] brd: module loaded [ 0.343877] loop: module loaded [ 0.348218] i2c-core: driver [adp5520] using legacy suspend method [ 0.348224] i2c-core: driver [adp5520] using legacy resume method [ 0.348474] pata_sis 0000:00:02.5: version 0.5.2 [ 0.392729] scsi0 : pata_sis [ 0.396205] scsi1 : pata_sis [ 0.397471] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.397478] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 0.398281] Fixed MDIO Bus: probed [ 0.398360] PPP generic driver version 2.4.2 [ 0.398505] tun: Universal TUN/TAP device driver, 1.6 [ 0.398508] tun: (C) 1999-2004 Max Krasnyansky [ 0.398681] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.398747] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.398781] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 0.398848] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 0.398943] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcffff000 [ 0.408278] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 [ 0.408655] hub 1-0:1.0: USB hub found [ 0.408666] hub 1-0:1.0: 6 ports detected [ 0.408804] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.408869] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.408904] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.408986] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.409041] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfffd000 [ 0.508673] hub 2-0:1.0: USB hub found [ 0.508687] hub 2-0:1.0: 3 ports detected [ 0.508848] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.508882] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.508968] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.509023] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffe000 [ 0.566610] hub 3-0:1.0: USB hub found [ 0.566625] hub 3-0:1.0: 3 ports detected [ 0.566762] uhci_hcd: USB Universal Host Controller Interface driver [ 0.566940] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.566944] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.567141] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.572486] mousedev: PS/2 mouse device common for all mice [ 0.572779] rtc_cmos 00:03: RTC can wake from S4 [ 0.572875] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.572913] rtc0: alarms up to one year, 114 bytes nvram [ 0.573103] device-mapper: uevent: version 1.0.3 [ 0.573245] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.573390] device-mapper: multipath: version 1.2.0 loaded [ 0.573396] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.573543] EISA: Probing bus 0 at eisa.0 [ 0.573590] EISA: Detected 0 cards. [ 0.576459] cpuidle: using governor ladder [ 0.576467] cpuidle: using governor menu [ 0.576976] TCP cubic registered [ 0.577273] NET: Registered protocol family 10 [ 0.578145] NET: Registered protocol family 17 [ 0.578193] Registering the dns_resolver key type [ 0.578233] powernow-k8: Processor cpuid 681 not supported [ 0.578277] Using IPI No-Shortcut mode [ 0.578518] PM: Hibernation image not present or could not be loaded. [ 0.578542] registered taskstats version 1 [ 0.578743] Magic number: 11:606:802 [ 0.578914] rtc_cmos 00:03: setting system clock to 2011-05-02 21:46:14 UTC (1304372774) [ 0.578920] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.578923] EDD information not available. [ 0.598587] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.784264] ata1.00: ATA-7: ST3250620A, 3.AAE, max UDMA/100 [ 0.784272] ata1.00: 488397168 sectors, multi 16: LBA48 [ 0.784964] ata1.01: ATA-6: ST380011A, 3.06, max UDMA/100 [ 0.784969] ata1.01: 156301488 sectors, multi 16: LBA48 [ 0.848100] isapnp: No Plug & Play device found [ 0.917109] ata1.00: configured for UDMA/100 [ 0.933052] ata1.01: configured for UDMA/100 [ 0.933333] scsi 0:0:0:0: Direct-Access ATA ST3250620A 3.AA PQ: 0 ANSI: 5 [ 0.933691] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.933921] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.934022] sd 0:0:0:0: [sda] Write Protect is off [ 0.934028] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.934071] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.964480] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 0.965389] scsi 0:0:1:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5 [ 0.965774] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.988169] sd 0:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.006917] sda: sda1 sda2 < sda5 sda6 sda7 > [ 1.007629] sd 0:0:1:0: [sdb] Write Protect is off [ 1.007635] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.007679] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.037756] sdb: sdb1 sdb2 < sdb5 > [ 1.038387] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.038563] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.084556] Freeing initrd memory: 12508k freed [ 1.136342] ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H54N, 1.00, max UDMA/66 [ 1.136355] ata2.01: ATAPI: HL-DT-ST GCE-8520B, 1.00, max UDMA/33 [ 1.136364] ata2.00: limited to UDMA/33 due to 40-wire cable [ 1.152319] ata2.00: configured for UDMA/33 [ 1.160052] Refined TSC clocksource calibration: 1593.573 MHz. [ 1.160059] Switching to clocksource tsc [ 1.168238] ata2.01: configured for UDMA/33 [ 1.171073] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H54N 1.00 PQ: 0 ANSI: 5 [ 1.173676] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.173682] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.173924] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.174062] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.174516] scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8520B 1.00 PQ: 0 ANSI: 5 [ 1.177658] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.177845] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.177966] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.178099] Freeing unused kernel memory: 700k freed [ 1.179226] Write protecting the kernel text: 5192k [ 1.179281] Write protecting the kernel read-only data: 2148k [ 1.230203] <30>udev[64]: starting version 167 [ 1.308095] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 1.603460] Floppy drive(s): fd0 is 1.44M [ 1.641776] sis900.c: v1.08.10 Apr. 2 2006 [ 1.641868] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.642913] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 1.653558] 0000:00:04.0: Using transceiver found at address 1 as default [ 1.659724] FDC 0 is a post-1991 82077 [ 1.682603] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:0b:6a:c6:fc:de [ 1.785660] input: USB+PS/2 Optical Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input3 [ 1.786231] generic-usb 0003:04F3:0230.0001: input,hidraw0: USB HID v1.11 Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:03.0-1/input0 [ 1.786664] usbcore: registered new interface driver usbhid [ 1.786669] usbhid: USB HID core driver [ 1.828093] usb 2-2: new full speed USB device using ohci_hcd and address 3 [ 2.224116] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem [ 2.224126] EXT4-fs (sdb1): write access will be enabled during recovery [ 5.437489] EXT4-fs (sdb1): orphan cleanup on readonly fs [ 5.437522] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 2760283 [ 5.437719] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 3538999 [ 5.437738] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 3538998 [ 5.437753] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 3539015 [ 5.437829] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 3539014 [ 5.437863] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1447861 [ 5.437893] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1447854 [ 5.437920] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1055286 [ 5.437945] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1055287 [ 5.437969] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 3538994 [ 5.437990] EXT4-fs (sdb1): 10 orphan inodes deleted [ 5.437995] EXT4-fs (sdb1): recovery complete [ 5.700129] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 18.037473] Adding 1571836k swap on /dev/sdb5. Priority:-1 extents:1 across:1571836k [ 18.125892] <30>udev[256]: starting version 167 [ 18.234687] lp: driver loaded but no devices found [ 18.370175] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 18.480240] agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] [ 18.775570] type=1400 audit(1304365592.690:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=398 comm="apparmor_parser" [ 18.800223] type=1400 audit(1304365592.718:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=398 comm="apparmor_parser" [ 18.800625] type=1400 audit(1304365592.718:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=398 comm="apparmor_parser" [ 19.232363] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000 [ 19.235312] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 19.235324] ACPI: resource 0000:00:02.1 [io 0x0c00-0x0c1f] conflicts with ACPI region SMRG [io 0xc00-0xc1f] [ 19.235328] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 19.274300] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.425618] parport_pc 00:09: reported by Plug and Play ACPI [ 19.425735] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 19.436121] gameport gameport0: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x200, speed 817kHz [ 19.618894] lp0: using parport0 (interrupt-driven). [ 20.053264] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x132B pid 0x208C [ 20.073486] usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01EA [ 20.075555] usbcore: registered new interface driver usblp [ 20.510233] type=1400 audit(1304365594.426:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=599 comm="apparmor_parser" [ 20.520409] type=1400 audit(1304365594.438:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=601 comm="apparmor_parser" [ 20.521173] type=1400 audit(1304365594.438:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=601 comm="apparmor_parser" [ 20.521551] type=1400 audit(1304365594.438:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=601 comm="apparmor_parser" [ 20.583058] type=1400 audit(1304365594.498:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=604 comm="apparmor_parser" [ 20.610084] type=1400 audit(1304365594.526:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=604 comm="apparmor_parser" [ 20.623959] type=1400 audit(1304365594.538:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=604 comm="apparmor_parser" [ 20.923917] [drm] Initialized drm 1.1.0 20060810 [ 21.146213] ppdev: user-space parallel port driver [ 21.189201] eth0: Media Link On 100mbps full-duplex [ 22.039432] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.061572] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x017100a3) [ 22.061893] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 22.098792] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 22.099068] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 22.099073] [drm] nouveau 0000:01:00.0: BMP version 5.21 [ 22.099077] [drm] nouveau 0000:01:00.0: Bios version 04.17.00.69 [ 22.099082] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.0 [ 22.099088] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000100 000088b8 [ 22.099094] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000200 000088b8 [ 22.099097] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02010121 00000003 [ 22.099101] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02010221 00000003 [ 22.099105] [drm] nouveau 0000:01:00.0: Merging DCB entries 0 and 1 [ 22.099109] [drm] nouveau 0000:01:00.0: Merging DCB entries 2 and 3 [ 22.099349] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [ 22.099356] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD330 [ 22.099399] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD6AA [ 22.137646] C-Media PCI 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 22.172273] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD44B [ 22.256072] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDBEE [ 22.256091] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD606 [ 22.782702] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 22.816197] [drm] nouveau 0000:01:00.0: 1 available performance level(s) [ 22.816206] [drm] nouveau 0000:01:00.0: 0: memory 332MHz [ 22.816220] [drm] nouveau 0000:01:00.0: c: memory 333MHz core 249MHz [ 22.818647] [TTM] Zone kernel: Available graphics memory: 439676 kiB. [ 22.818654] [TTM] Zone highmem: Available graphics memory: 771424 kiB. [ 22.818658] [TTM] Initializing pool allocator. [ 22.818690] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM [ 22.819073] agpgart-sis 0000:00:00.0: AGP 3.5 bridge [ 22.819103] agpgart-sis 0000:00:00.0: bridge is in legacy mode, falling back to 2.x [ 22.819113] agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode [ 22.819155] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 22.819160] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 22.822261] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 22.822268] [drm] No driver support for vblank timestamp query. [ 22.825899] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 22.825909] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 1) [ 23.048822] [drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x49000, bo efc88400 [ 23.051537] Console: switching to colour frame buffer device 170x48 [ 23.051612] fb0: nouveaufb frame buffer device [ 23.051615] drm: registered panic notifier [ 23.051635] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 24.144773] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 24.144784] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A [ 25.196212] usb 2-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 25.196312] usb 1-4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 28.160994] usb 2-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 28.161061] usb 1-4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 29.440040] eth0: no IPv6 routers present [ 29.465453] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0