octave3.0 3.0.0-1 source package in Ubuntu
Changelog
octave3.0 (3.0.0-1) unstable; urgency=low
The "Seasons Greetings" release
* New upstream release. A big thanks to John W. Eaton and all the
Octave development team for this most awaited release.
* debian/in/control, debian/rules: Replaced most of the references to
octave2.9 by octave3.0. Made all octave3.0* packages
provide/replace/conflict with the respective octave2.9* packages.
* debian/patches/02_prelease_warning.dpatch: Dropped patch, since this
is the real 3.0 release
* debian/in/control: Dropped the build-conflict with atlas3-base-dev.
This will make the autobuilders happy.
* debian/in/control: Dropped the empty octave package. This will allow
releasing octave3.0 without an epoch in its version number. We will
reintroduce this package later, if necessary (anyway, octave3.0
provides octave).
octave2.1 (1:2.1.73-15) unstable; urgency=low
[ Rafael Laboissiere ]
* debian/rules: Kludge for preventing octave.st from being installed in
version 2.1 of the octave*.* package, avoiding clashes with octave2.9
(closes: #457191). This is a temporary solution; octave.st will
eventually be incorporated into the enscript package (see Bug#457244).
[ Thomas Weber ]
* debian/in/control: Build-conflict with atlas3-base-dev and remove it
from build-depends (closes: 457167)
octave2.9 (1:2.9.19-2) unstable; urgency=low
* Synched with the last octave2.1 release
octave2.1 (1:2.1.73-14) unstable; urgency=low
* debian/in/PACKAGE-info.prerm: Fixed a typo that was preventing the
*octave<version> info files from being removed by "install-info
--remove" (closes: #456636)
* debian/rules: Make sure that the octave.desktop.in and octave-tags
exist before manipulating/moving them
* debian/in/PACKAGE-emacsen.dirs: Enable some directories only for
octave2.9
* debian/in/control: Since the fftw3 package have been renamed,
build-depends on libfft3-dev and make octave*.*-headers depend on
libfft3-dev as well
octave2.9 (1:2.9.19-1) unstable; urgency=low
* New upstream release
* debian/in/PACKAGE-htmldoc.doc-base.*: Replaced tabulations by single
spaces at the beginning of continuation lines of the Abstract fields
(cf Debian doc-base Manual section 2.3.2)
* debian/rules: Remove empty dirs (usr/{share,lib}/[...]/site/[...])
octave2.9 (1:2.9.18-1) unstable; urgency=low
* New upstream release
* debian/rules:
+ Call dh_shlibdeps with the appropriate -l option in order to avoid
warnings about the private libraries of Octave not being found. These
warnings have been introduced in a recent version of dpkg-shlibdeps.
+ Copy version NEWS files from debian/in/ directory into debian/
+ Remove debian/NEWS at clean rule
+ Remove some empty directories from the main octave*.* package
* debian/in/octave3.0-NEWS: Moved from debian/NEWS
* debian/in/control:
+ Dropped the Homepage pseudo-header for the extended description
+ Bumped Standards-Version to 3.7.3
+ Use Vcs-* headers instead of the deprecated XS-Vcs-* ones
+ Added editing mode information for Emacs
octave2.9 (1:2.9.17-1) unstable; urgency=low
* New upstream release
octave2.9 (1:2.9.16-1) unstable; urgency=low
* New upstream release
octave2.9 (1:2.9.15-1) unstable; urgency=low
[ Thomas Weber ]
* New upstream release.
* Dropped patches (applied upstream):
+ 01_include_missing_files
+ 50_mix-range-and-sparse
[ Rafael Laboissiere ]
* debian/rules: Only do extra links for the manpages when we are
packaging a pre-release version
octave3.0 (2.9.15-1) experimental; urgency=low
[ Thomas Weber ]
* Declare 2.9.15 as release candidate for 3.0. This has been discussed with
upstream and is encouraged (closes: #446639)
[ Rafael Laboissiere ]
* Removed patches (applied upstream):
+ debian/patches/01_include_missing_files.dpatch
+ debian/patches/50_mix-range-and-sparse.dpatch
octave2.9 (1:2.9.14-1) unstable; urgency=low
[ Thomas Weber ]
* New upstream release
* debian/rules:
+ Don't force mkoctfile to strip .oct files (closes: #437672)
+ Don't compress PDF files (partly (closes: #441722))
* debian/in/control:
+ Add qhull to build-dependencies. Octave-forge's geometry toolbox was
merged with Octave and needs this.
* patches/01_include_missing_files:
+ Include .m files that were missed in the distribution tarball
(closes the other half of #441722)
[ Rafael Laboissiere ]
* debian/in/PACKAGE.menu: Adapted to the new menu hierarchy, which will
be in the next release of Policy
* debian/rules: Increased the update-alternatives priority of octave2.9
to 90 and keep that of octave2.1 at 80
* debian/in/control:
+ octave*-emacsen package depends on newer emacs22
+ Build-depends on desktop-file-utils
+ Added Homepage field
* debian/in/PACKAGE-htmldoc.doc-base.faq: Reference the correct HTML
files of the FAQ
* debian/rules:
+ Patch the examples/octave.desktop.in file, such that the referenced
command exists
+ Rename the installed octave.desktop file
octave2.9 (1:2.9.13-1) unstable; urgency=low
* New upstream release
* debian/patches/01_use_suitesparse_for_ufsparse.dpatch,
debian/patches/50_fix_pkg_rebuild.m.dpatch : Removed patches
(applied upstream)
* debian/octave.st: Added enscript highlighting rules for Octave
* debian/in/PACKAGE.dirs: Added directory for enscript
* debian/rules: Install octave.st
* debian/in/control:
+ Removed the obsolete build-dependency on dejagnu (over two years
ago, DejaGNU was replaced by the test/assert infrastructure for
running the tests)
+ Use the substitution variable ${binary:Version} instead of the
deprecated ${Source-Version}, which also makes the package
binNMUable
* debian/rules: Do not ignore make clean/distclean error
octave2.9 (1:2.9.12-2) unstable; urgency=low
* debian/in/control, debian/rules:
+ Switch back to g77 from gfortran (closes: #427257).
This has been discussed with the toolchain guys and is the easist
solution for now, see
http://lists.debian.org/debian-gcc/2007/06/msg00024.html
+ Switch to SuiteSparse from UFSparse.
* New patch:
01_use_suitesparse_for_ufsparse.dpatch
SuiteSparse introduced a new type in 3.0, see
http://www.cae.wisc.edu/pipermail/help-octave/2007-June/004188.html
octave2.9 (1:2.9.12-1) unstable; urgency=low
[ Thomas Weber ]
* New upstream release
(2.9.11 had a problem when building, so we didn't package it)
* data-conv.cc now #include's cstdlib (closes: #417487)
* This release fixes the problem with handing empty matrices to fft.m
(closes: #423278)
* Dropped patches (applied upstream):
+ 50_doc-builtin-vars.dpatch
+ 50_glpk-pre-ifdef-logic.dpatch
+ 50_dont_resize_empty_dimensions.dpatch
+ 50_examples-use-gnuclient.dpatch
+ 50_syscalls-test-sleep.dpatch
* New patch:
+ 50_fix_pkg_rebuild.m.dpatch: fix issue with pkg -rebuild, see
http://www.nabble.com/Small-bug-in-%22pkg-rebuild%22-tf3807246.html
* debian/in/control: Add build-dep on libcurl4-dev for the url* functions
[ Rafael Laboissiere ]
* debian/in/control:
+ Build-depend on gs-gpl, such that building the package twice in a
row will succeed (closes: #424381)
+ Since 2.9.12 is marked as the "testing" (AKA "recommended") version
by the upstream author, the octave virtual package depends now on
octave2.9. Since the previous version of this package was
1:2.1.73-13, we need to add an epoch to the version number in the
2.9 branch.
octave2.9 (2.9.10-4) unstable; urgency=low
[ Rafael Laboissiere ]
* debian/copyright: Updated this long outdated file, that still cited
Dirk as the package maintainer. In particular, mention that
Octave is released under version 2 or later of the GPL.
* debian/patches/50_octave-bug-tempfile.dpatch: Adjusted for Octave
2.9.10
* debian/in/control:
+ Changed relationship to gnuplot from Suggests to Recommends
(closes: #415780)
+ Replaced build-dependency on tetex-bin by texlive-latex-base and
texlive-generic-recommended (teTeX is deprecated in lenny, in favor
of TeXlive)
* debian/rules: make-indep depends on make-arch-stamp because run-octave
is invoked when building the docs
[ Thomas Weber ]
* PACKAGE-headers.postinst, PACKAGE-headers.prerm:
Let the /usr/include/octave symlink point to the octave/ subdirectory of
/usr/include/octave-X.Y.Z (Closes: #400246). This was clarified with
upstream, see
http://www.cae.wisc.edu/pipermail/octave-maintainers/2006-December/001384.html
* debian/rules: Generate debian/control as part of the maintainer-scripts
target.
* removed patches (applied upstream): 50_invalid_indexes
* new patches:
50_dont_resize_empty_dimensions: fix assignments to empty matrices and add
testcases for this (Closes: #417671). Thanks John Eaton and Kim Hansen.
octave2.9 (2.9.10-3) unstable; urgency=low
* Uploaded to sid, now that glpk 4.15 went out from the NEW queue
octave2.9 (2.9.10-2) experimental; urgency=low
* debian/patches taken from upstream CVS:
+ 50_doc-builtin-vars: Fix documentation for obsolete built-in
variables LOADPATH, INFO_FILE, and INFO_PROGRAM. Also, fix
the octave-variables variable in octave-mod.el (closes: #416046).
+ 50_examples-use-gnuclient: Use gnuclient instead of the deprecated
gnudoit in the info-emacs-* examples (closes: #416431)
* debian/patches/50_invalid_indexes.dpatch: Removed the useless creation
of liboctave/Array.cc.orig
* debian/in/PACKAGE.lintian: Added override for Lintian warning regarding
m/miscellaneous/license.m being an extra-license-file
* debian/rules: Create new rule save-files, on which configure depends
and is run before patch-stamp. This was necessary due to a problem in
patching Octave-FAQ.texi and manipulating its @setfilename
declaration.
octave2.9 (2.9.10-1) experimental; urgency=low
* New upstream release:
+ The emacs/octave-inf.el file correctly calls the pwd command
(closes: #416048).
+ debian/patches/50_glpk-pre-ifdef-logic.dpatch: Fixed #ifdef logic
around macro GLPK_PRE_4_14, which was causing an extra closing brace
to be introduced for the extern "C" declaration when GLPK_PRE_4_14
was not defined. This patch has been sent to <email address hidden>.
+ debian/patches/50_syscalls-test-sleep.dpatch: Increase the amount of
time to sleep, in case of errno == EAGAIN when running the test for
syscalls.cc ("make check" hangs in an unpredictable way without this
patch)
* Removed dpatches (applied upstream):
+ 50_mkoctifle-man-indent-option
+ 50_fix_hold_state
+ 50_rename-octave-tags
+ 50_clean-mat-files
+ 50_empty-lhs-sparse
+ 50_plot-doc
+ 50_print-imagemagick-extensions
+ 50_correct_test
+ 50_glpk-api-v4.15
+ 50_parse-inline-brackets
+ 50_sparse_constructors
* debian/rules:
+ Install emacs/octave-tags* files instead of emacs/otags*
+ Added conf.texi to $(savefiles)
+ Added hack for removing the libcruft/misc/pic directory left after
"make clean", as well as the libcruft/mkf77def script and the test
file test/a.wav
+ When building the architecture independent part of the pacakge, call
make with AWK=gawk, otherwise mawk will be used and the infamous
error message "program limit exceeded: sprintf buffer size=1020"
will be issued.
* debian/in/control:
+ Added XS-Vcs-Svn and XS-Vcs-Browser fields
+ Build-depends on gawk
octave2.9 (2.9.9-9) experimental; urgency=low
* debian/patches/50_glpk-api-v4.15.dpatch: Adapt the glpk binding to the
new API for GLPK 4.15, as well as the autoconf check
* debian/in/control: Build-depends on libglpk0 (>= 4.15)
* Since glpk 4.15 is stuck in the NEW queue, this version of octave2.9 is
released to experimental
* debian/patches/50_parse-inline-brackets.dpatch: Fix a parsing problem
in function handles and inlines were brackets are present. This patch
has been applied upstream in CVS. See
http://www.cae.wisc.edu/pipermail/bug-octave/2006-October/000903.html
octave2.9 (2.9.9-8) unstable; urgency=low
[ Rafael Laboissiere ]
* debian/patches/50_print-imagemagick-extensions.dpatch: Added patch to
avoid failures in print() when file extensions needing call to convert
are specified by the user (closes: #408992)
[ Thomas Weber ]
* debian/patches/50_correct_test.dpatch: Use first file in loadpath for
tests (closes: #410070)
octave2.9 (2.9.9-7) unstable; urgency=low
* debian/in/control: Changed wording of octave*-headers description.
Thanks to Reuben Thomas for the suggestion (closes: #399190).
* debian/patches/50_plot-doc.dpatch: Fixes a long-standing documentation
bug in Octave, regarding the plot function. Thanks to Francesco
Potortì for the patch, which has been also applied to the 2.9 branch
upstream (closes: #398935).
octave2.9 (2.9.9-6) unstable; urgency=low
[ Thomas Weber ]
* debian/patches/50_sparse_constructors.dpatch: Patch for mixing bool
with sparse matrices in kron() (closes: 395293). Thanks John Eaton.
* debian/patches/50_invalid_indexes.dpatch: Fixes a crash, see
http://www.cae.wisc.edu/pipermail/bug-octave/2006-November/001077.html
Thanks John Eaton.
octave2.9 (2.9.9-5) unstable; urgency=low
* debian/patches/50_empty-lhs-sparse.dpatch: Modified this patch
to treat cases when the size of the LHS sparse matrix is reajusted
while assigning to it (really closes: #394982). Thanks to David
Bateman and John W. Eaton.
octave2.9 (2.9.9-4) unstable; urgency=low
* debian/patches/50_empty-lhs-sparse.dpatch: Added patch to avoid
crashes when calling sparse function with an unitialized LHS
(closes: #394982). Thanks to David Bateman.
octave2.9 (2.9.9-3) unstable; urgency=low
* Rebuilt to get the last changes regarding the renaming of otags
octave2.1 (1:2.1.73-13) unstable; urgency=low
* debian/rules, debian/in/PACKAGE-emacsen.{postinst,prerm}: Renamed
otags to be octave-tags, avoiding clashes with the Ocaml otags package
(closes: #394789).
* debian/patches/50_rename-octave-tags.dpatch: Added patch for renaming
otags to be octave-tags in the upstream files. These changes have been
also applied in upstream CVS.
octave2.1 (1:2.1.73-12) unstable; urgency=low
* Rebuilt with gnuplot-nox build-dependency instead of gnuplot, in order
to make some autobuilders happier
octave2.9 (2.9.9-2) unstable; urgency=low
[ Thomas Weber ]
* debian/in/control: Add pcre to build-dependencies. It's needed since
2.9.5 for some features.
* debian/patches/50_fix_hold_state.dpatch: correct a problem when using
clearplot; and hold on; (Closes: #391033), thanks John W. Eaton This
patch changes a .l file, so we build-depend on flex in debian/control!
octave2.9 (2.9.9-1) unstable; urgency=low
[ Rafael Laboissiere ]
* New upstream release
* debian/patches/50_sparse-fct-scalar-arg.patch.dpatch,
debian/patches/50_options-order-doc.m.dpatch: Removed patches
(applied upstream)
* debian/patches/50_mkoctifle-man-indent-option.dpatch: New patch for
indenting correctly the description of option --mex in the mkoctfile
man page
[ Thomas Weber ]
* debian/in/control: build-depend on gnuplot-nox instead of gnuplot; maybe
this will allow us to circumvent a temporary dependency problem with
gnuplot on several architectures (alpha, mips, mipsel).
octave2.9 (2.9.8-2) unstable; urgency=low
* debian/patches/50_options-order-doc.m.dpatch: Fix the order of
the options in the invocation of the info program, such that the
info-emacs-info and info-emacs-octave-help scripts work again
(closes: #368843)
* debian/patches/50_sparse-fct-scalar-arg.patch.dpatch: Make spkron
(and other sparse matrix functions) accept scalar arguments. Thanks to
David Bateman <adb014 AT gmail DOT com> for posting the patch in
<email address hidden> (closes: #387137).
octave2.9 (2.9.8-1) unstable; urgency=low
* New upstream release. Empty arrays are correctly detect. If array
is empty, return/produce value is same size as array (closes: #384195)
* debian/patches/50_clean-mat-files.dpatch: Clean *.mat files left by
make check
octave2.1 (1:2.1.73-11) unstable; urgency=low
* debian/patches/50_OCTAVEHOME-texi.dpatch: Change OCTAVEHOME to
/usr, which is the correct value in Debian systems
* debian/in/octave2.1-00list: Include the above
* debian/patches/50_octave-bug-tempfile.dpatch: In octave-bug, use
Debian's tempfile(1) for enhanced security
* debian/rules: Removed the Perl hack that used to implement the
patch above
* debian/patches/50_clean-pdf-docs: Clean PDF files in doc/ not cleaned
by the maintainer-clean target
* debian/rules: Split the targets make, build, and install into
*-{arch,indep}. With this change, only the files destined for
inclusion in the architecture dependent packages will be generated by
the autobuilders.
* debian/subdirs-vars.pl: Perl script for manipulating the SUBDIRS and
INSTALL_SUBDIRS variables in octMakefile, allowing the build/install
of the documentation files separately
octave2.1 (1:2.1.73-10) unstable; urgency=low
* Regenerated octave2.1 packages for integrating the last changes
regarding octave-depends
* debian/patches/50_fixed-freqz.dpatch: Fix script/general/freqz.m,
patch taken from upstream CVS (closes: #383097)
octave2.9 (2.9.7-2) unstable; urgency=low
* debian/in/octave-depends:
- Introduced substitution variables ${octave<major>:Depends}
- Updated POD section accordingly
* debian/rules: Create symlink for octave<major>-depends
octave2.9 (2.9.7-1) unstable; urgency=low
[ Thomas Weber ]
* New upstream release. A bug in the path function has been fixed
upstream allowing again this function to accept more than one argument
(closes: #374943).
* Removed patches (applied upstream)
- 50_array-out-of-bounds-2.9
- 50_desktop-category-no-space
- 50_fix_path-2.9
* debian/in/control: Bump compat level to 5; depend on debhelper >= 5
octave2.9 (2.9.6-4) unstable; urgency=low
* debian/patches/50_desktop-category-no-space.dpatch: remove extraneous
space character in the Categories filed. This is needed when building
the package with desktop-file-utils version 0.11-1.
octave2.1 (1:2.1.73-9) unstable; urgency=low
[ Thomas Weber ]
* Introduce mkoctfile<major> symlink:
/usr/bin/mkoctfile<major> -> /usr/bin/mkoctfile-<version>,
needed for octave2.X-forge mex binary
octave2.9 (2.9.6-3) unstable; urgency=low
* debian/in/PACKAGE.conf: Added code for removing all the directories
containing octave-forge .m scripts. This allows octave2.9 and
octave-forge to be installed together and avoids errors in octave2.9
such as etime calling an outdated datenum function from octave-forge
(closes: #375646).
octave2.9 (2.9.6-2) unstable; urgency=low
* debian/in/PACKAGE.conf: Renamed from debian/octave.conf. Contains
slice directives for initializing the Octave path differently
according to the branch: for 2.1, use the LOADPATH variable; for 2.9,
use the addpath function (closes: #373965)
* debian/control: Build-Depends on slice for doing the above
* debian/rules: Install $(PACKAGE).conf instead of octave.conf
octave2.9 (2.9.6-1) unstable; urgency=low
[ Thomas Weber ]
* New upstream release
* debian/in/control: Don't conflict with octave-forge anymore. Bug
#362591 was indeed a problem with the configure script and has been
fixed upstream.
* debian/in/octave2.9-00list: Removed from the list the following
patches:
- 50_fix-apiversion-2.9.dpatch (applied upstream)
- 50_system_doc-2.9.dpatch (applied upstream)
- 50_octave-value-list-resize-2.9.dpatch (this was a gcc bug)
- 50_automatic-replot-docstring (behaviour changed in 2.9)
Put a space into the file -- otherwise it's empty and won't get included
in the diff, thus breaking the build.
[ Rafael Laboissiere ]
* debian/in/control:
- Bumped Standards-Version to 3.7.2 (no changes needed)
- Constrain build-dependency on g++-4.1 >= 4.1.1-4, because the
previous version wrongly triggers a "operator delete" compilation
error (see bugs #372705, #372152, and #372559). This is only
temporary, to insure that the autobuilders will work correctly. In
the next version of the package, this build-dependency will be
dropped.
octave2.1 (1:2.1.73-8) unstable; urgency=low
[ Rafael Laboissiere ]
* Integrate last changes from the 2.9 branch into octave2.1
* debian/control: Bumped Standards-Version to 3.7.0 (no changes needed)
[ Thomas Weber ]
* debian/rules: Make parallel build possible and remove octave-config2.X
link -- it is not needed
defs.make: use api-versioned directory for m-files
octave2.9 (2.9.5-7) unstable; urgency=low
[ Thomas Weber ]
* debian/patches/50_system_doc-2.9.dpatch: adapt the example in the
documentation for the new output order of system()
[ Rafael Laboissiere ]
* Install doc files BUGS, SENDING-PATCHES, and THANKS
* debian/in/octave*-watch: Fixed URLs
octave2.9 (2.9.5-6) unstable; urgency=low
* debian/in/control: Build-depends on libufsparse-dev incon the 2.9 branch
octave2.9 (2.9.5-5) unstable; urgency=low
[ Thomas Weber ]
* debian/patches/50_fix-apiversion-2.9.dpatch: restore api
versioned directories
* debian/rules: introduce octave-config2.X symlink in preparation of
dual built packages for Octave 2.1 and 2.9
* debian/in/control: remove dependency on octave2.0 for -emacsen package
octave2.9 (2.9.5-4) unstable; urgency=low
* debian/in/control: Conflicts with octave-forge (closes: #362591)
octave2.1 (1:2.1.73-7) unstable; urgency=low
* debian/in/PACKAGE-htmldoc.doc-base.lib: Fixed path for HTML files.
Really closes Bug #362251.
* debian/patches/50_return-deffn.dpatch: Added patch, whcih completely
closes Bug #361705.
octave2.1 (1:2.1.73-6) unstable; urgency=low
* debian/in/PACKAGE-htmldoc.doc-base.*: Fixed path for documentation
files (closes: #362251)
* debian/in/control: Removed build-dependency on slice, which was only
needed for processing he files above
octave2.9 (2.9.5-3) unstable; urgency=low
* Uploaded to unstable
* Closes: #360219, which was already fixed in experimental
* debian/in/octave2.9-00list: Added 50_automatic-replot-docstring to the
list.
octave2.1 (1:2.1.73-5) unstable; urgency=low
* Uploaded to unstable, now that the libhdf5 transition is over
* debian/rules: Cruft removal operation, dropped old and useless comments
* debian/patches/50_automatic-replot-docstring.dpatch: Patch for adding
a docstring for the automatic_replot built-in variable (closes:
#361705, although only partially, because the "return" keyword is
still indexed as a variable and I do not think the upstream author
will change this)
octave2.1 (1:2.1.73-4) experimental; urgency=low
* debian/in/octave2.1-00list: Added 50_g++4.1-fixes to the list
octave2.1 (1:2.1.73-3) experimental; urgency=low
* Uploading to experimental until the hdf5 transition is finished
* debian/patches/50_g++4.1-fixes.dpatch: Allow compilation with g++ 4.1
* debian/rules:
- Cruft removal
- Mode robust treatment of changed files in doc/ such that there is no
problem at creation of the diff.gz file
octave2.9 (2.9.5-2) experimental; urgency=low
* debian/in/control: Build-Depends on slice (closes: #360219)
octave2.9 (2.9.5-1) experimental; urgency=low
* New upstream release, released to the experimental distribution until
the hdf5 transition is over
* Redesigned the build & install processes for the html documentation,
since it is now shipped in HTML directories under doc/.
* debian/in/octave2.9-00list: Removed from the list the following
patches:
- 50_install-liboctinterp
- 50_glpk-sparse
- 50_octave-mod-bind-m-bs-2.9
- 70_octave-mod-honor-auto-indent
which have been applied upstream, and:
- 50_mkoctfile.1-no-negative
which does not seem to be necessary.
octave2.1 (1:2.1.73-2) unstable; urgency=low
* debian/in/control: Adjusted dependencies on libhdf5 >= 1.6.5 (both
Build-Depends and octave<version>-headers Depends)
octave2.1 (1:2.1.73-1) unstable; urgency=low
[ Thomas Weber ]
* New upstream release
* debian/rules: Add octave2.X.1.gz link for man page which makes lintian
happy
* removed patches (applied upstream):
- 50_g++4.1.dpatch
- 50_inferior-octave-resync-dirs.dpatch
- 50_octave-value-list-resize-2.1.dpatch (not applied upstream, but it was
only a work-around for a gcc bug)
- 50_octave-mod-bind-m-bs-2.1.dpatch
* new patches:
- 50_lgamma_doc.dpatch (Closes: #335373)
- 50_incomplete_gamma.dpatch (Closes: #335195)
octave2.9 (2.9.4-13+b1) unstable; urgency=low
* Binary-only non-maintainer upload for i386; no source changes.
* Rebuild against libhdf5 1.6.5
octave2.1 (1:2.1.72-12+b1) unstable; urgency=low
* Binary-only non-maintainer upload for i386; no source changes.
* Rebuild against libhdf5 1.6.5
octave2.1 (1:2.1.72-12) unstable; urgency=low
* New mechanism for obtaining the versioned debian/watch files
* debian/in/octave*-watch: Source files for the the debian/uscan files
* debian/rules:
- Generate debian/watch from debian/in/octave*-watch
- Link the manpage for octave$(major) to that for octave-$(version),
such that there will be no binary without manpage
* debian/in/octave2.1-00list: Really apply patch 50_g++4.1
octave2.9 (2.9.4-13) unstable; urgency=low
* debian/patches/50_octave-value-list-resize-2.9.dpatch: Adjusted patch
for compilation with g++ 4.1 (thanks to Martin Michlmayr,
closes: #356634)
octave2.1 (1:2.1.72-11) unstable; urgency=low
* debian/patches/50_g++4.1.dpatch: Added patch proposed by John W. Eaton
to allow compilation with g++ 4.1.
* debian/patches/50_octave-value-list-resize-2.1.dpatch: Adjusted patch
for compilation with g++ 4.1 (thanks to Martin Michlmayr)
* With the two changes above, closes: #355980
* N.B.: the present version of the package was compiled with g++ 4.0,
because this is the version of the GCC suite in sid. However, the
changes were tested with g++ 4.1 available from experimental, and it
worked.
octave2.9 (2.9.4-12) unstable; urgency=low
* debian/patches/50_glpk-sparse.dpatch: Patch to make glpk work with
sparse matrices (thanks to Kim Hansen <email address hidden>,
closes: 350230)
octave2.9 (2.9.4-11) unstable; urgency=low
* debian/patches/70_octave-mod-honor-auto-indent.dpatch: Upstream patch
for honoring the octave-auto-indent variable in emacs/octave-mod.el
(closes: #341759)
octave2.1 (1:2.1.72-10) unstable; urgency=low
* debian/rules: Symlink /usr/bin/octave<major> to
/usr/bin/octave-<version>
octave2.1 (1:2.1.72-9) unstable; urgency=low
* debian/in/deps.make: Added this template file, where the octave-config
command is versioned.
octave2.9 (2.9.4-10) unstable; urgency=low
* debian/in/control: Generate octave package only for the 2.1 branch.
* The last upload was rejected because the octave package has being
wrongly generated. This version still closes: #340428 (use uploader
name in debian/changelog trailer lines instead of mailing list address
for pkg-octave-devel)
octave2.9 (2.9.4-9) unstable; urgency=low
* Synchronized Debian-specific files with latest changes in the 2.1.*
branch.
* debian/changelog: Now using the uploader name in the trailer lines
instead of the pkg-octave-devel mailing list address
(closes: #340428)
octave2.1 (1:2.1.72-8) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/in/octave-depends: New template file. Give full path to
octave-config. Uses replaceable strings @MAJOR@ and @VERSION@.
* debian/rules: Generate debian/octave-depends from
debian/in/octave-depends
octave2.1 (1:2.1.72-7) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* This version use an epoch in its number. This is necessary due to the
mistake I did in uploading the octave_2.9.4-1 virtual package to
unstable. The 2.9.4-1 version replaced the 2.1.72-* version and this
is wrong because the 2.1 (testing) branch should take precedence over
the 2.9 (unstable) branch.
octave2.9 (2.9.4-8) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* Rebuilt the 2.9 branch with the m68k-specific settings removed.
* debian/in/control: The octave virtual package is now only generated
for the 2.9 branch, but depends on octave2.1, which is the recommended
version for end-users. This is counter-intuitive, but is necessary
due to a mistake in uploading the octave virtual package with version
2.9.4-1, which is still stuck in unstable.
octave2.1 (2.1.72-6) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/in/control: The package now build-depends on gfortran on all
architectures, incluing m68k, which used to build-depend on fort77.
* debian/rules: Removed all m68k-specific settings. This should fix the
FTBFS on m68k. Thanks to Stephen R Marenka <email address hidden>
for the patch (closes: #340773)
octave2.9 (2.9.4-7) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/in/control: Added libglpk0 to the build-dependencies for
octave2.9. The __glpk__.oct module, which is dynamically loadable,
nows links against a shared library (libglpk0.so) (closes: #310226).
octave2.9 (2.9.4-6) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/patches/50_octave-mod-bind-m-bs-2.9.dpatch: Bind M-BS key
sequence to backward-kill-word in XEmacs (closes: #340125)
octave2.1 (2.1.72-5) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/patches/50_octave-mod-bind-m-bs-2.1.dpatch: Bind M-BS key
sequence to backward-kill-word in XEmacs
octave2.9 (2.9.4-5) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/in/PACKAGE-info.prerm: Remove alternatives to the info files
(closes: #339964)
* debian/rules (clean): Remove file examples/octave.desktop, which
should be removed by make distcleamn, but is not
octave2.1 (2.1.72-4) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/in/PACKAGE-info.prerm: Remove alternatives to the info files
(closes: #339959)
octave2.9 (2.9.4-4) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* Recompiled to drop the binary dependency on libglpk0, which sneaked
into the last release
octave2.9 (2.9.4-3) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/rules: Set DESTDIR in the call to make install, instead of
setting every installation directory explicitly. This should fix the
problem of wrong paths in the PKG_ADD file (closes: #339442)
octave2.1 (2.1.72-3) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/in/control: Make the virtual octave package architecture = all
octave2.9 (2.9.4-2) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/patches/50_octave-value-list-resize-2.9.dpatch: Added patch for
the 2.9.* branch (see below)
* debian/in/control: Generate an unversioned, virtual octave package
only for the 2.1 branch, which is the recommended one
octave2.1 (2.1.72-2) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/patches/50_octave-value-list-resize-2.1.dpatch: Added patch
posted by J. W. Eaton in the help-octave mailing list for avoiding
crashes in the octave_value_list destructor
octave2.9 (2.9.4-1) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* New upstream release
* debian/in/octave2.9-00list:
- Removed patch 50_no-check-nested-functions-2.9, which has been
applied upstream
- Added patch 50_install-liboctinterp, necessary for installing
liboctinterp.so in /usr/lib/octave-<version>
octave2.1 (2.1.72-1) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* New upstream release
* debian/in/octave2.1-00list: Removed patch
50_no-check-nested-functions-2.1, which has been applied upstream
* Packages octave2.1-* and octave2.9-* can now be installed together
(FIXME: THIS DOES NOT WORK FOR octave2.x-info YET!!!)
* debian/in/control: Packages octave*-headers, octave*-doc, and
octave*-htmldoc conflict with versions << 2.1
* debian/in/PACKAGE-htmldoc.doc-base.*: Make versioned documents for
doc-base
* debian/rules:
- Install versioned octave-depends, defs.make, and and 50octave.el
files
- (configure-stamp) Set versioned infofile variable in call to
configure
- (make-stamp) Save texi files in *-save and replace setfilename
macros with versioned names
- (clean) Recover original *.texi files
- Substitute PRIORITY variable in debian/in/*.postinst scripts,
with octave2.1 taking high priority than octave2.9 for all
alternatives set through update-alternatives
* debian/in/PACKAGE-headers.{postinst,prerm}: Install/remove
alternatives to octave-depends and defs.make
* debian/in/*.postinst: Set PRIORITY variable
* debian/in/PACKAGE-info.postinst:
- Install versioned info files
- Set alternatives to all versioned info files
* debian/rules: cope with the new output of dpkg-architecture for arm
and m68k, which changed recently (thanks to Christian T. Steigies
<email address hidden> for spotting the problem)
* debian/in/PACKAGE-htmldoc.postinst: Removed this script, because it
does nothing more than include the debhelper-generated one
octave2.9 (2.9.3-1) experimental; urgency=low
+++ Changes by Colin Ingram
* New upstream release
* debian/rules: adjusted to build from octave2.9 source directory
* debian/patches/50_no-check-nested-functions.dpatch removed
* debian/patches/50_mkoctfile.1-no-negative.dpatch added
+++ Changes by Rafael Laboissiere
* The patches applied by dpatch are now done selectively according to
the version of Octave. For that, the debian/patches/00list file is
now generated when running "./debian/rules maintainer-scripts" from
the files debian/in/$(PACKAGE)-00list.
* debian/rules (maintainer-scripts): Generate file
debian/patches/00list
* debian/in/octave2.1-00list, debian/in/octave2.9-00list: New files.
* debian/patches/50_no-check-nested-functions-2.1.dpatch: New patch,
which is actually the same used in the last version of the package
octave2.1.
* debian/patches/50_no-check-nested-functions-2.9.dpatch: New patch,
only for octave2.9, which is equivalent to the one used for
octave2.1.
* debian/in/PACKAGE.lintian:
- Made this file package-independent, really
- Removed old Lintian overrides
octave2.1 (2.1.71-7) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/patches/50_no-check-nested-functions-2.1.dpatch: Added patch
from the upstream CVS sources to avoid detrimental effects of cd()
commands in ~/.octaverc when running octave-inferior-mode in (X)Emacs
(closes: #324471).
octave2.1 (2.1.71-6) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/in/PACKAGE-emacsen.emacsen-startup: Commented out code that
fiddles with user preferences (closes: #334347)
octave2.1 (2.1.71-5) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/in/PACKAGE.prerm: Remove ls-R database for kpathsea
(closes: #332492)
* debian/in/control: Build-depend on fort77 for the m68k architecture and
on gfortran for the others (closes: #333463)
octave2.1 (2.1.71-4) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* debian/in/control: Synchronize the build-dependencies with the
octave2.1-headers binary dependencies (closes: #328732).
octave2.1 (2.1.71-3) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* Recompiled against libhdf5-serial-1.6.4-0c2 and with g++ 4.0. This
should complete the C++ ABI transition for the octave2.1 package
(closes: #327027).
* Also, once this version will reach unstable, problems with using
mkoctfile with g++ 4.0 will disappear (closes: #327509).
* debian/compat: Created this file, containing the compatibility level 4
for debhelper. This avoids warning messages from the debhelper
scripts.
* debian/rules: Change installation directory from debian/tmp to
debian/octave2.1 and also gives the later as --sourcedir for the
dh_movefiles command. This allows building the package under
debhelper compatibility level = 4.
* debian/in/PACKAGE.conffiles, debian/octave2.1.conffiles,
debian/in/PACKAGE-emacsen.conffiles,
debian/octave2.1-emacsen.conffiles: Removed files, since debhelper in
compatibility level 4 adds automatically all files in /etc/ to the
conffiles file.
* debian/copyright: Updated Free Software Foundation address.
* debian/changelog: Removed all instances of the deprecated
"[Cc]loses=*" from the package version lines. Removed all the entries
before version 1.1.1-7, because they were not in the correct format.
This legacy material is now in debian/changelog-old.
* debian/patches/50_no-check-nested-functions.dpatch: Added patch which
avoid global function definitions to take over local ones (see
http://www.octave.org/mailing-lists/help-octave/2005/3189).
* debian/octave-config.1: Removed this file, since there is another one
upstream which is up-to-date (in doc/interpreter).
* debian/rules: The octave-config script is now part of the
octave($version)-headers package.
* debian/in/PACKAGE.postinst, debian/in/PACKAGE-headers.postinst: Update
alternatives for octave-config and octave-config.1 in
octave($version)-headers package instead of octave($version).
octave2.1 (2.1.71-2) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* Uploaded to the unstable distribution. Actually, there was no bump in
the API version, it is still api-v13
* This version fixes the FTBFS problem on amd64 using g++ 4.0 related to
wrong enum declarations in src/lex.l and src/toplevel.cc (closes:
#314705).
* debian/in/control: Bumped Standards-Version to 3.6.2. No changes needed.
* debian/in/PACKAGE.menu: Use full version number for the menu command.
This makes Lintian happy.
octave2.1 (2.1.71-1) experimental; urgency=low
+++ Changes by Rafael Laboissiere
* New upstream release, released to experimental because the API number
bumped from api-v13 to api-v15. This makes several other
Octave-related package unusable and the uploads to unstable must be
coordinated.
* debian/in/watch: New template file for debian/watch, which takes into
account the MAJOR number of the Octave branch (currently either 2.1 or
2.9).
* debian/rules (helper-files): Generate debian/watch from
debian/in/watch
* debian/in/control: Versioned build-dependency on libhdf5-serial-dev (>=
1.6.4)
octave2.9 (2.9.2-2) experimental; urgency=low
+++ Changes by Rafael Laboissiere
* debian/rules: Do not remove src/gplot.cc in clean target. This file
is built upstream from gplot.l using flex and its removal was causing
the build daemons to fail.
octave2.9 (2.9.2-1) experimental; urgency=low
+++ Changes by Rafael Laboissiere
* New upstream release
* debian/rules: Remove generated files that were left after make clean
octave2.9 (2.9.1-1) experimental; urgency=low
+++ Changes by Rafael Laboissiere
* New upstream release, development branch (closes: #303201)
octave2.1 (2.1.69-1) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* New upstream release
octave2.1 (2.1.68-1) experimental; urgency=low
+++ Changes by Rafael Laboissiere
* New upstream release
octave2.1 (2.1.67-1) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* New upstream release
* debian/patches/00list: Removed 50_build-faq-pdf.dpatch, since it has
been applied upstream
* debian/control: For the octave2.1-doc package, changed mention to
PostScript to PDF, since the former format is not distributed anymore
octave2.1 (2.1.66-1) unstable; urgency=low
+++ Changes by Rafael Laboissiere
* New upstream release
* debian/control: Build-depend on dpatch
* debian/rules:
- Adjust for using dpatch
- Use compiler flag "-O0" instead of "-O1" for the m68k architecture.
Let us hope that this will fix the buildd problem on the m68k
architecture.
- Removed hack to build the PDF documentation files, since they are
now built by the upstream Makefile
* debian/patches/50_build-faq-pdf.dpatch: Added patch for building
Octave-FAQ.pdf
octave2.1 (2.1.65-1) unstable; urgency=low
+++ Changes by J. Rafael Rodriguez Galvan:
* New upstream release 2.1.65 released 24 hours ago
+++ Changes by Rafael Laboissiere
* debian/*.postinst.in, debian/*.prerm.in: Moved these files from the
original *.postinst and *. prerm ones
* debian/octave2.1.lintian.in: Idem from octave2.1.lintian
* debian/defs.make, debian/octave-depends: Added files
* debian/rules:
- (configure-stamp) Generate *.postinst, *.prerm, and *.lintian by
replacing the @VERSION@ string with the current Octave version number
- (clean) Remove the *.postinst, *.prerm, *.lintian files generated
automatically
- (install) Install files defs.make and octave-depends in
octave2.1-headers package
* Install PDF documentation files instead of the PS ones. There is a
pdfdocs variable in debian/rules now that control which files are
built/installed. Build-Depends on tetex-bin. (Closes: #293562)
+++ Changes by Adam Conrad:
* Add logic to debian/rules and debian/control to make sure that
octave2.1-headers depends on f2c on m68k (closes: #292917)
octave2.1 (2.1.64-3) unstable; urgency=low
+++ Changes by Rafael Laboissiere:
* debian/rules: Get the logic around octave-bug.in right. This was
causing a FTBFS in all architectures because the test failed and,
consequently, make failed (closes: #292403).
* debian/changelog: Start using "Debian Octave Group" in the signature
of entries. Also, added Emacs variable settings at the end, handy
when using debian-changelog-mode. This avoids two warnings issued by
Lintian regarding mismatch between maintainer and uploader, and the
necessity to document NMU.
octave2.1 (2.1.64-2) unstable; urgency=low
* Uploaded in behalf of the new maintainer of the octave2.1 packages: the
Debian Octave Group <email address hidden>
* debian/control:
- Changed Maintainer
- Build-depends on libreadline5-dev
- octave2.1-headers depends on libreadline5-dev
- Lower-cased the first word and removed some "The" words in the short
description of packages, as per the Developers Reference, section
6.2.2. This makes Lintian happy.
* debian/rules:
- (clean) Inverse the order of the calls to rm libcruft/*/Makefile and
make distclean. This was causing several *.o in libcruft to be left
after debian/rules clean, which resulted in dpkg-source breakage when
building the diff.gz package file.
- (configure) Save the original octave-bug.in file as octave-bug.in.orig
prior to the tempfile substitution
- (clean) Restore octave-bug.in.orig as octave-bug.in, such that the
patch does not end up in the diff.gz file
octave2.1 (2.1.64-1) unstable; urgency=low
* New upstream release 2.1.64 released today
octave2.1 (2.1.63-1) unstable; urgency=low
* New upstream release 2.1.63 released today
octave2.1 (2.1.62-1) unstable; urgency=low
* New upstream release 2.1.62 released today
octave2.1 (2.1.61-1) unstable; urgency=low
* New upstream release 2.1.61 released today
octave2.1 (2.1.60-1) unstable; urgency=low
* New upstream version 2.1.60 released today
* debian/watch: Added watch file
octave2.1 (2.1.59-1) unstable; urgency=low
* New upstream version 2.1.59 released today
octave2.1 (2.1.58-1) unstable; urgency=low
* New upstream version 2.1.58 released today
* This upstream contains fixes for the following bug reports:
- "for i=1:5; (tril(..." segfaults octave 2.1.57" (Closes: #240117)
- "Problem with built-in function frewind" (Closes: #268907)
- "Problem with function errorbar" (Closes: #269525)
* debian/rules: Configure with atlas variable
--with-blas=-lblas-3 --with-lapack=-llapack-3
* debian/control: octave2.1-headers now Depends on
lapack3-dev | atlas3-base-dev | liblapack-3.so,
refblas3-dev | atlas3-base-dev | libblas-3.so
to ensure simpler defaults before atlas or the virtual package
* debian/control: Rewrote Description for octave-doc (Closes: #263492)
octave2.1 (2.1.57-4) unstable; urgency=low
* debian/control: Change Build-Depends for Atlas again to
refblas3-dev | atlas3-base-dev, lapack3-dev | atlas3-base-dev
* debian/control: Also remove '... | liblapack.so.3, ... | libblas.so.3'
from Depends for octave2.1-headers
* debian/rules: Also update atlas configure argument
* debian/control: Upgrade Standards-Version: to 3.6.1.1
octave2.1 (2.1.57-3) unstable; urgency=low
* debian/control: Update Build-Depends to new Atlas scheme:
refblas3-dev | libblas-3.so, lapack3-dev | liblapack-3.so
* debian/control: Similarly, Depends of octave2.1-headers set to
"atlas-base-dev | lapack3-dev | liblapack.so.3, atlas3-base-dev |
refblas3-dev | libblas.so.3" (Closes: #253477)
octave2.1 (2.1.57-2) unstable; urgency=low
* Rebuild required by hdf5 library .so number change (Closes: #243095)
octave2.1 (2.1.57-1) unstable; urgency=low
* New upstream version 2.1.57 released today
octave2.1 (2.1.56-1) unstable; urgency=low
* New upstream version 2.1.56 released today
* debian/rules: Adapted to only --with-f77 (without --with-g77) upstream
octave2.1 (2.1.55-1) unstable; urgency=low
* New upstream version 2.1.55 released an hour ago
octave2.1 (2.1.54-2) unstable; urgency=low
* debian/control: Build-Depends for octave2.1-headers expanded by
refblas3-dev | atlas3-base-dev, lapack3-dev | atlas3-base-dev, fftw3-dev
* debian/rules: Apply debian/2.1.54_arrayindex.patch from octave-maintainers
list to correct a slowdown in array indexing operation due to N-d code
octave2.1 (2.1.54-1) unstable; urgency=low
* New upstream version 2.1.54 released today
* Upstream changes to close the two open bugs
octave2.1-emacsen: strings between single quotes containing % troubles
(Closes: #231272)
Missing file from html documentatios (Closes: #231451)
* debian/control: Build-Depends changed from fftw-dev to fftw3-dev
to match upstream change to support the faster fftw3
* debian/control: Build-Depends upgraded from atlas2 to atlas3 using
'refblas3-dev | atlas3-base-dev, lapack3-dev | atlas3-base-dev'
Previous value was the slighty more complex 'atlas2-base-dev
(>= 3.2.1ln-6) [!arm] | atlas2-3dnow-dev (>= 3.2.1ln-6) [!arm], blas-dev'
* debian/rules: Consequently, change configure targets for blas and lapack
--with-blas=/usr/lib/libblas2.so \
--with-lapack=/usr/lib/liblapack2.so
to
--with-blas=/usr/lib/libblas-3.so \
--with-lapack=/usr/lib/liblapack-3.so
Thanks to Camm Maguire for all his work on the Atlas et al libraries
* debian/control: (Finally) changed Depends for octave2.1-emacsen from
'emacs20 | ...' to 'emacs21 | xemacs21 | emacsen' (Closes: #232778)
* debian/octave2.1.lintian: Added a new entry
'octave2.1: binary-or-shlib-defines-rpath \
./usr/lib/octave-2.1.54/liboctave.so.2. 1.54 /usr/lib/octave-2.1.54'
octave2.1 (2.1.53-4) unstable; urgency=low
* debian/control: Corrected Depends for octave2.1-headers to
"libhdf5-serial-dev | libhdf5-lam-dev | libhdf5-mpich-dev" (Closes: #231114)
octave2.1 (2.1.53-3) unstable; urgency=low
* debian/rules: Run configure with DEFAULT_PAGER=pager (Closes: #230524)
* debian/control: No longer Depends: on less as /etc/alternatives for
/usr/bin/pager must be present, and allows user to override locally
* debian/control: Added "libreadline4-dev, libncurses5-dev,
libhdf5-serial-dev" to Depends for octave2.1-headers
octave2.1 (2.1.53-2) unstable; urgency=low
* debian/rules: Run configure again --with-hdf5
* debian/control: Add libhdf5-serial-dev to Build-Depends
* liboctave/Array-flags.h: Apply patch by Jakub Bogusz which stops
both a segfault on Sparc and unaligned traps on Alpha.
* emacs/octave-mod.el: Apply patch by John Eaton to correct octave mode
error with very recent XEmacs versions (Closes: #229336)
octave2.1 (2.1.53-1) unstable; urgency=low
* New upstream version 2.1.53 released today
* This new version contains upstream fixes for the pending Debian bugs:
- octave-config echoes an empty path (Closes: #222225)
- online docs of plot contains non-working example (Closes: #223473)
octave2.1 (2.1.52-1) unstable; urgency=low
* New upstream version octave 2.1.52 released today
* Includes change to concatenation bug (Closes: #221685)
octave2.1 (2.1.51-1) unstable; urgency=low
* New upstream version octave 2.1.51 released today
* This represents a fairly major change from the last release. Quoting from
the announcement:
This version has many new features and bug fixes. The biggest change
is that N-d arrays (for numbers, structs, and cells) are mostly
working, though there are some significant features that still need to
be implemented. For example, the [] operator will fail to concatenate
N-d arrays, but we hope to fix this for 2.1.52. If you find that
another of your favorite N-d array operations doesn't work, please
mention it so we can have some idea of what features are missed the
most.
See http://www.octave.org/mailing-lists/octave-maintainers/2003/353
for the full announcement, or the upstream ChangeLog in the package.
* debian/control: Standards-Version increased to 3.6.1.0
* debian/control: octave2.1-doc suggests reduced to 'gv | postscript-viewer'
octave2.1 (2.1.50-3) unstable; urgency=low
* src/utils.cc: Patch by Eric de Castro Lopo which fix usages of vsnprintf;
a similar patch is already in the upstream CVS earlier (Closes: #204391)
* debian/octave2.1.menu: Small beautification
octave2.1 (2.1.50-2) unstable; urgency=low
* debian/{rules,control}: For m68k, switch from f2c to fort77 as some
add-on packages' Makefiles cannot cope with the f2c invocation.
Also add FFLIBS=-lf2c in call to configure. Spezial thanks to
Christian Steigies for testing all this prior to this upload.
* debian/control: Added blas-dev and less to Build-Depends
* debian/copyright: Add www.octave.org as upstream location (Closes: #199561)
octave2.1 (2.1.50-1) unstable; urgency=low
* New upstream version octave 2.1.50 released today
* debian/{rules,control}: Revert back to using default gcc suite now
that version 3.3 is in unstable and testing; still use f2c for m68k
octave2.1 (2.1.49-3.0.1) unstable; urgency=low
* The "don't type 3.2 when you want 3.3 release"
* debian/rules: now really use g77-3.3 if arch is hppa-linux
octave2.1 (2.1.49-3) unstable; urgency=low
* The "another ones bites the dust" release
* debian/rules: Another minor little change needed for hppa and g77-3.3
octave2.1 (2.1.49-2) unstable; urgency=low
* The "will we get this into testing now?" release
* As we managed to get octave2.1 compiled on m68k (using f2c) and on
hppa (using gcc/g++ 3.3), let's remove the last problem: hdf5 which has
a grave upstream bug (#193033) and will not currently enter testing
* debian/rules: Configure call (temporarily) changed to --without-hdf5
* debian/control: Build-Depends on libhdf5-serial-dev (>= 1.4.5) removed
octave2.1 (2.1.49-1.0.1) unstable; urgency=low
* debian/{control,rules}: Use gcc/g++/g77 3.3 on hppa.
octave2.1 (2.1.49-1) unstable; urgency=low
* New upstream version octave 2.1.49 released today
* debian/{control,rules}: Use f2c on m68k, again. Whatever it takes.
octave2.1 (2.1.48-3) unstable; urgency=low
* debian/control: Hardwire Depends: on gcc et al to 3.2 as some of
Octave's C++ code is not yet ready for release 3.3 of g++
* debian/rules: After days of experimenting with crest.debian.org (scoring
an impressive 96 bogomips), we found that g77 -O0 and -O2 really don't
work for m68k on some of the legacy Fortran, but miracously f2c -O1 does
-- and so does gcc -O1. Luckily it only took about 26 hours for each
'make' run, and I am really glad that Debian Policy more or less forces
me to care so much about m68k. If only there were any users for this
architecture ...
.
Needless to say, it is somewhat sad that this recompilation is forced
upon the other architectures on which gcc/g++/g77 are working just fine.
Oh the things one has to do to get Octave back into Debian testing.
octave2.1 (2.1.48-2) unstable; urgency=low
* liboctave/kpse.cc: Applied two upstream patches
* liboctave/Array-idx.h: Applied one-byte upstream patch
* debian/rules: Make sure .oct file examples get into octave2.1-headers
octave2.1 (2.1.48-1) unstable; urgency=low
* New upstream version octave 2.1.48 released today
octave2.1 (2.1.47-2) unstable; urgency=low
* liboctave/kpse.cc: Applied patch by JWE to ensure that directory
ends with directory separator (Closes: #191859)
octave2.1 (2.1.47-1) unstable; urgency=low
* New upstream version octave 2.1.47 released this evening
* scripts/control/base/__bodquist__.m: Fixed (Closes: #187427)
* debian/control: s/eisspack/eispack/ in Description
* debian/control: Raised Standards-Version to 3.5.9q
* debian/octave2.1.postinst: Raise update-alternatives priority for
octave entry, default is no longer provided by the octave2.0 package
* debian/control: Added entry for 'octave' package from 2.0 branch as the
'octave' package now Depends on octave2.1 as per discussion with JWE
octave2.1 (2.1.46-3) unstable; urgency=low
* Rebuilt against new hdf5 packages. Thanks for the heads-up, Josselin!
* debian/control: Updated Build-Depends to libhdf5-serial-dev (>= 1.4.5)
octave2.1 (2.1.46-2) unstable; urgency=low
* debian/rules: Configure with --enable-rpath
octave2.1 (2.1.46-1) unstable; urgency=low
* New upstream version octave 2.1.46 released this evening
* debian/rules: Correct softlink for /etc/octave2.1.conf (Closes: #182000)
* debian/octave2.1.menu: Corrected the menu entry
octave2.1 (2.1.45-1) unstable; urgency=low
* New upstream version octave 2.1.45 released today
* debian/rules: Ensure that 3.2 versions of gcc et al are called
* debian/rules: Install emacs/otags.1 as debian/otags.1 is upstream too
* debian/octave-config.1: Contributed manual page
octave2.1 (2.1.44-1) unstable; urgency=low
* New upstream version octave 2.1.44 released today
* debian/control: Build-Depends on gcc/g77/g++ (>= 3.2.2)
* debian/rules: Adjusted accordingly
octave2.1 (2.1.43-2) unstable; urgency=low
* Added scrips/mkpkgadd from upstream email by JWE
* debian/rules: configure to --build $(system), not --host $(system)
octave2.1 (2.1.43-1) unstable; urgency=low
* New upstream version octave 2.1.43 released this evening
* Added acx_blas.m4 and acx_lapack.m4 from email from JWE as well
octave2.1 (2.1.42-4) unstable; urgency=low
* debian/rules: Don't use Debian's kpathsea with gcc 3.2
octave2.1 (2.1.42-3) unstable; urgency=low
* debian/rules: Use F77, not FC, to set the fortran compiler
octave2.1 (2.1.42-2) unstable; urgency=low
* Rebuilt again from pristine sources, some intermediate .d files had
not been cleaned and thus crept into the .diff.gz which leads to
failures on all non-i386 autobuilders.
* debian/{control,rules}: Re-enable hdf5 support
octave2.1 (2.1.42-1) unstable; urgency=low
* New upstream version octave 2.1.42 released today (as was 2.1.41)
* debian/{control,rules}: Adjusted to require gcc/g77/g++ 3.2
octave2.1 (2.1.40-1) unstable; urgency=low
* New upstream version octave 2.1.40 released earlier today
octave2.1 (2.1.39-1) unstable; urgency=low
* New upstream version octave 2.1.39 released earlier today
* debian/mkoctfile.1: Contributed manual page
octave2.1 (2.1.38-1) unstable; urgency=low
* Upgraded to Octave 2.1.38 released earlier this evening
octave2.1 (2.1.37-2) unstable; urgency=low
* src/Makefile.in, liboctave/Makefile.in: Applied upstream patch to
build kpathsea library correctly on hppa (Closes: #166179)
* src/ov-mapper.cc: Applied small patch by JWE from bug-octave ML
* debian/control: Section on octave2.1-doc to 'doc' as per override file
octave2.1 (2.1.37-1) unstable; urgency=low
* Upgraded to new Octave development release 2.1.37 released today
* mk-opts.pl: Applied three-line post-release patch from JWE
* debian/control: Added Depends: g++ | g++-3.0, g77 | g77-3.0 for the
octave2.1-headers sub-package as configure hard-wires a dependency to
these at built time; ia64 needs the g*-3.0 version (Closes: #160818)
* This release also closes the following bug report
- lsode documentation (Closes: #151026)
- gammainc breaks on large values (Closes: #165808)
octave2.1 (2.1.36-6) unstable; urgency=low
* debian/rules: Brown bag fix for m68k/g77; and Debian has currently no
infrastructure to hand-compile on m68k, this unfortunately needs to
recompile needlessly on ten other architectures too. (Closes: #159765)
octave2.1 (2.1.36-5) unstable; urgency=low
* debian/octave2.1-emacsen.emacsen-startup: Autoload octave-hlp under
the correct function label of octave-help (Closes: #154045)
* debian/{rules,control}: Do not configure for Atlas on arm
octave2.1 (2.1.36-3woody4) woody-proposed-updates; urgency=low
* Backport for woody built against atlas with corrected virtual Depends
on blas/atlas to prevent bugs like #150253 and #152284 in woody
* debian/octave2.1-emacsen.emacsen-startup: Autoload inferior-octave
* debian/rules: Use "-O0 -g0" on arm and m68k to shorten compile time
* debian/rules: No longer use f2c on m68k
* debian/control: Adjusted Build-Depends accordingly
octave2.1 (2.1.36-4) unstable; urgency=low
* debian/rules: Configure with --with-lapack=/usr/lib/liblapack2.so
octave2.1 (2.1.36-3) unstable; urgency=low
* debian/control: Build-Depends on atlas2-base-dev, not blas-dev
* debian/rules: Configure with --with-blas=/usr/lib/libblas2.so
octave2.1 (2.1.36-2) unstable; urgency=low
* debian/octave2.1.lintian: Updated rpath warning for octave-2.1.36
* debian/rules: Reset default compiler(s) on i386 to gcc 2.9* and
rebuilt, the test value of 3.0.* was used which will then require
the same compilers for add-on packages.
octave2.1 (2.1.36-1) unstable; urgency=low
* Upgraded to new Octave development release 2.1.36
* debian/control: Added Build-Depends on texi2html (split from tetex-bin)
octave2.1 (2.1.35-7) unstable; urgency=low
* debian/rules: Remove doc/faq/Octave-FAQ_toc.html during clean so that
the html version of the Octave FAQ gets rebuilt (Closes: #134046)
octave2.1 (2.1.35-6) unstable; urgency=low
* debian/control: Spelling correction (Closes: #125202)
* debian/control: Labelled Description: lines with (2.1 branch)
* Bbuilt against new fftw libraries for finer-grained fftw dependencies
* debian/control: Build-Depends: fftw-dev (>= 2.1.3-10) (Closes: #128778)
octave2.1 (2.1.35-5) unstable; urgency=low
* debian/octave2.0-emacsen-{prerm,postinst}: Let dh_installemacsen deal
with the call to emacsen-install (Closes: #123900)
* debian/rules: Still rename emacsen startup to 50octave.el rather
than the default 50octave2.0-emacsen.el of its package name
octave2.1 (2.1.35-4) unstable; urgency=low
* debian/control: Added Depends: texinfo for octave2.1 (Closes: #122857)
octave2.1 (2.1.35-3) unstable; urgency=low
* debian/control: Added dejagnu to Build-Depends
* debian/README.Atlas: Updated to reflect autoMAGIC loading of Atlas lib
with ldconfig from libc6_2.2.4-5 or later -- thanks, Ben Collins!
* debian/rules: Do not configure --with-hdf5 as this appears to prevent
transition into the testing distribution, was only used on i386 anyway
* debian/control: Removed Build-Depends on "libhdf5-serial-dev [i386]"
octave2.1 (2.1.35-2) unstable; urgency=low
* debian/octave2.1-emacsen.emacsen-startup: Applied patch by Rafael
Laboissiere <email address hidden> (Closes: #118188)
* debian/octave2.1-emacsen.emacsen-remove: Make corresponding change
octave2.1 (2.1.35-1) unstable; urgency=low
* Upgraded to new Octave development release 2.1.35
* This upstream release supports gcc versions 2.9.x and 3.0.x so
we do not need the full patch by Jeff Licquia <email address hidden>
but use parts of it (in deban/rules and debian/control) to select
gcc/g++/g77 3.0 on the ia64 architecture. (Closes: #117929)
* debian/rules: Added --with-fftw to use Fast Fourier Transf. libraries
* debian/control: Added fftw-dev to Build-Depends
* debian/rules: Install .el files into octave2.1-emacsen, not octave
* debian/50octave.el: Apply small patch to correct loading
* Thanks to Rafael Laboissiere <email address hidden> for both the
suggestion and the patch (Closes: #117581)
* debian/otags.1: contributed simple manual page (lintian)
* debian/octave2.1-emacsen.{postinst,prerm}: dpkg-alternatives for otags
octave2.1 (2.1.34-6) unstable; urgency=low
* debian/rules: Configure --with-fastblas=blas (available on nine
architectures), Atlas can dynamically override this where available
* debian/control: Changed atlas reference to blas for Build-Depends,
requires versioned Build-Depends on blas-dev (>= 1.0-9)
* debian/README.Atlas: Added simple README file on Atlas
* debian/mkoctfile.in: New upstream version, better f2c treatment
octave2.1 (2.1.34-5) unstable; urgency=low
* Rebuilt against atlas2 3.2.1 (Closes: #104014)
octave2.1 (2.1.34-4) unstable; urgency=low
* debian/rules: Make support for Atlas and HDF5 conditional on the
build architecture -- i386, alpha and sparc have atlas2 packages,
the others do not. Similarly, currently only i386 has hdf5 support.
* debian/control: Adjust Build-Depends accordingly
octave2.1 (2.1.34-3) unstable; urgency=low
* debian/rules: configure with support for HDF5 data (thanks wolfie!)
* debian/control: Build-Depends on libhdf5-serial-dev
* debian/control: Upgraded Standards-Version
octave2.1 (2.1.34-2) unstable; urgency=low
* Makeconf.in: Reverted back to version as of a few days ago as the patch
included into 2.1.34 at the last minute prevents a proper installation
of the octave header files
octave2.1 (2.1.34-1) unstable; urgency=low
* Upgraded to new Octave development release 2.1.34
* debian/octave2.1-info.{prerm,postinst}: small lintian cleanups
octave2.1 (2.1.33-3) unstable; urgency=low
* liboctave/oct-rl-edit.c: Applied patch by Rene H. Larsen <email address hidden>
to update Octave to the API of version 4.2 of the readline library;
this is also fixed upstream in CVS (Closes: #93539, #93564, #94093)
* debian/rules: install lintian overrides file to tell lintian to not
worry about the dynamic libraries in /usr/lib/octave-2.1.33/
octave2.1 (2.1.33-2) unstable; urgency=low
* debian/control: Declare octave2.1-headers as Architecture: any as it
contains mkoctfile with its arch-specific options (Closes: #89563)
octave2.1 (2.1.33-1) unstable; urgency=low
* Upgraded to new Octave development release 2.1.33
* debian/control: octave2.1-emacsen depends on octave2.1 || octave2.0
octave2.1 (2.1.32-2) unstable; urgency=low
* liboctave/Range.cc: Applied another patch by JWE
* debian/control: octave2.1 conflicts with octave (<= 2.0.16-2)
* debian/control: octave2.1-htmldoc conflicts with octave-htmldoc
* debian/control: octave2.1* packages depend on octave (= ${Source-Version})
to ensure proper transition from the pre-octave2.{0,1} packages in potato
octave2.1 (2.1.32-1) unstable; urgency=low
* Upgraded to new Octave development release 2.1.32
* debian/rules: Applied small Hurd patch by Marcus (Closes: #77939)
Patch is also integrated upstream for configure.in
* debian/control: octave2.1-emacsen conflicts with octave (<= 2.0.16)
in case new "empty transition" octave (>= 2.0.16.91) is not installed
* liboctave/Range.cc: Applied patch by JWE
octave2.1 (2.1.31-5) unstable; urgency=low
* debian/control: Added gnuplot to build-depends
* debian/rules: Added dependencies on install and check for binary-indep
octave2.1 (2.1.31-4) unstable; urgency=low
* debian/rules: Add -n to package-specific dh_installdocs calls
to suppress double post{inst,rm} entries (Closes: #75474)
* debian/control: Add Provides: octave for octave2.1 (Closes: #75489)
octave2.1 (2.1.31-3) unstable; urgency=low
* debian/control: Let octave2.1-htmldoc also provide octave-htmldoc
to satisfy outside dependencies as in task-science (Closes: #74866)
* debian/control: Corresponding changes for the -doc and -info packages
octave2.1 (2.1.31-2) unstable; urgency=low
* debian/control: Let octave2.1-htmldoc conflict with and replace the
older octave-htmldoc to allow overwriting of files (Closes: #69573)
* debian/control: octave2.0-info conflicts with octave (<= 2.0.16)
* debian/rules: Comment out dh_undocumented call (Closes: #70495)
* Bug report #70037 cannot be replicated here on a fresh install, the
likely cause is probably an upgrade issue which is tougher to debug
leading to a tentative closing of the bug report and the suggestion
to reopen should the bug reappear. (Closes: #70037)
octave2.0 (2.0.16.91-4) unstable; urgency=low
* debian/rules: Remove spurious ":/usr/local/" file tree below
/usr/share/octave/$(version)/site/m/ (Closes: #68515)
octave2.1 (2.1.31-1) unstable; urgency=low
* Upgraded to new Octave development release 2.1.31
* debian/rules: Configure and build with the newly added support for the
self-tuning Atlas blas (this creates a dependency on atlas2)
* debian/control: Added gperf and atlas2-dev to Build-Depends
* debian/rules: Ensure man page for mkoctfile-$VERSION is picked up by
update-alternatice for the octace2.1-headers package (Closes: #67080)
octave2.1 (2.1.30-2) unstable; urgency=low
* debian/octave2.1-emacsen.emacsen-install: added '-vanilla' to $flags
* debian/control: Added g77, libreadline4-dev and libncurses5-dev to
Build-Depends
octave (2.0.16-2) frozen; urgency=low
* Added code to emacsen-installer to define the defgroup macro (which is
needed for emacs19) (Closes: #62822)
* Added Depends: on debianutils (>= 1.6) as we need tempfile(1) in the
emacsen installer script (Closes: #62825)
* Thanks to Yann Dirson <email address hidden> for help on this one.
octave2.1 (2.1.30-1) unstable; urgency=low
* First release of Octave based on the 2.1.* development series
* Built with a new setup which allows a parallel installation of 2.0.*
and 2.1.* -- this requires matching octave2.0 packages which are being
provided based on 2.0.16.91, the most recent stable release.
octave (2.0.16.91-1) unstable; urgency=low
* Upgraded to second pre-release of Octave 2.0.17
* emacs/octave-mod.el: Applied patch by Stephen Eglen to suppress
(innocent) font-lock warning by xemacs on operators (Closes: #60920)
octave (2.0.16.90-3) unstable; urgency=low
* debian/rules: Delete some files that are erroneously left over from
the package building process (Closes: #59994)
octave (2.0.16.90-2) unstable; urgency=low
* Contributed a manual page octave-bug.1 (Closes: #59353)
octave (2.0.16.90-1) unstable; urgency=low
* Upgraded to first pre-release of Octave 2.0.17
octave (2.0.16-1) frozen unstable; urgency=low
* Upgraded to new upstream stable release
* As this fixes several small bugs reported on the bug-octave mailing
list, it would be good if this version could be included in potato
* Applied trivial patch to saveimage.m (Closes: #29932)
octave (2.0.15-1) unstable; urgency=low
* Upgraded to release 2.0.15 of Octave
* Created new package octave-headers as the include files are only
needed for compiling C++ (or C or Fortran) against Octave -- this
saves over 700kB (installed) from the basic Octave package.
* Built using the libreadline4 package
* debian/control: Added Build-Depends
octave (2.0.14.93-1) unstable; urgency=low
* Upgraded to fourth pre-release of Octave 2.0.15
octave (2.0.14.92-1) unstable; urgency=low
* Upgraded to third pre-release of Octave 2.0.15
* debian/control: Changed Standards-Version to 3.1.0
octave (2.0.14.91-1) unstable; urgency=low
* Upgraded to second pre-release of Octave 2.0.15
* debian/menu: Created as the menu package will stop providing one
octave (2.0.14.90-2) unstable; urgency=low
* debian/rules: Don't let dh_installemacsen modify postinst and prerm,
rather use our previous code which first tests for emacsen-commen so
that we don't have to depend on it (Closes: #44924)
octave (2.0.14.90-1) unstable; urgency=low
* Upgraded to first pre-release of Octave 2.0.15
* Reverted back to using the supplied readline sources instead of our
library as we do not carry libreadline-4.0 ourselves. Once Guy
provides it, Octave will use it.
octave (2.0.14-4) unstable; urgency=low
* debian/rules: Adapted to use /usr/share/ following the recommendation
on FHS transition from the Technical Committee (Closes: #44594)
* debian/rules: Test for debhelper >= 2.0.40 for FHS compliance
* debian/control: Upgraded to Debian Policy 3.0.1
octave (2.0.14-3) unstable; urgency=low
* Recompiled under libstdc++2.10 trying to get rid of the errorneous
double Depends: on libstdc++ (Closes: #44388)
octave (2.0.14-2) unstable; urgency=low
* Recompiled under libc6_2.1.2-0pre7 and libstdc++2.9-glib2.1_2.91.66-2
* src/sysdep.cc: Added `#include termcap' conditional on HAVE_TERMCAP_H
and modified one prototype to compile with gcc-2.95 as suggested by
John W. Eaton and discussed on the octave-bug mailing list
* debian/octave.install: Corrected (harmless) typo in emacsen install
script (Closes: #36860)
* debian/octave.el: Added call of octave-hlp to Emacsen startup file
octave (2.0.14-1) unstable; urgency=low
* Upgraded to new upstream release 2.0.14
* debian/postinst: Set ownership and mode of /usr/local/share/octave
explicitly to root.staff and 2755 (fixes #35751)
octave (2.0.13.97-1) unstable; urgency=low
* Upgraded to eigth pre-release of Octave 2.0.14
octave (2.0.13.96-3) unstable; urgency=low
* Starting with this release of the Debian package, Octave is linked
against Debian's copy of libreadline (instead of its own) as Debian's
libreadline package now provides all the needed symbols (fixes #27707)
* debian/shlibs.local: Added to depend on libreadline2g-2.1-13
* debian/rules: Added powerpc support. Thanks to Konstantinos
Margaritis <email address hidden> for the patch.
octave (2.0.13.96-2) unstable; urgency=low
* debian/octave.conffiles: Registered the emacs config file
/etc/emacs/site-start.d/50octave.el as a conffile (fixes #32802)
octave (2.0.13.96-1) unstable; urgency=low
* Upgraded to seventh pre-release of Octave 2.0.14
* Also install the contributed otags script for tags generation
octave (2.0.13.95-1) frozen unstable; urgency=low
* Upgraded to sixth pre-release of Octave 2.0.14
* Recompiled under libc6_2.0.7u-7.1 to get rid of libc6_2.0.7u dependence
octave (2.0.13.94-2) frozen unstable; urgency=low
* Applied patch from <email address hidden> to mkoctfile.in (fixes #30377)
* Made emacsen install script output slightly less verbose
* Upgraded to Standards-Version 2.5.0
octave (2.0.13.94-1) frozen unstable; urgency=low
* Upgraded to fifth pre-release of Octave 2.0.14
* Applied (modified) patch by Rafael Laboissiere <email address hidden> to
emacsen install script for [x]emacs handling of 'no-site-file' script
* While this does not formally close an open Debian bug, it should go
into frozen as the previous four pre-releases of Octave-2.0.14
octave (2.0.13.93-1) frozen unstable; urgency=low
* Upgraded to fourth pre-release of Octave 2.0.14 which contains
an upstream bug fix to Bessel function arguments
* Built properly with upstream sources in octave_2.0.13.93.orig.tar.gz
so that a .diff.gz is built (fixes #29674)
octave (2.0.13.92-1) frozen unstable; urgency=low
* Upgraded to third pre-release of Octave 2.0.14
* Among other things, this defines __NO_MATH_INLINES to prevent the use
of inlines in /usr/include/__math.h which cannot cope with expressions
like exp(Inf). My thanks to John Eaton for having debugged this, on my
computer ;-) (fixed #27516)
octave (2.0.13.91-1) unstable; urgency=low
* Upgraded to second pre-release of Octave 2.0.14
octave (2.0.13.90-1) unstable; urgency=low
* Upgraded to first pre-release of Octave 2.0.14
* Modified emacsen install file to be more silent
* Added new package octave-htmldoc with html documentation
* debian/rules: Added 'make check' to use DejaGnu regression suite
octave (2.0.13-6) unstable; urgency=low
* Recompiled under egcs_2.91.57 and libstdc++_2.91.57 (fixes #26776)
* Changed cursor keybindings for inferior-octave-mode to comments in
/etc/emacs/site-start.d/50octave.el; now the Emacs mode for Octave is
consistent with other comint modes, on the other hand, the code that is
commented out makes the mode consistent with Octave's own shell. The
difference is whether cursor keys or M-p,M-n are used to scroll
through the readline history (fixes #26468)
* Applied patch by Mumit Khan for use with newer egcs compiler
(http://www.che.wisc.edu/octave/mailing-lists/bug-octave/1998/270)
* Changed debian/rules to also install ChangeLog file from
subdirectories of the Octave source tree
octave (2.0.13-5) unstable; urgency=low
* Added the default LOADPATH to LOADPATH setting in /etc/octave.conf
* Changed emacsen-common to be more tolerant on rmdir (fixes #24490)
* Corrected cosmetic type in emacsen-common 'remove' script (fixes #24497)
octave (2.0.13-4) frozen unstable; urgency=medium
* Applied patch by Roman Hodek <email address hidden>
to configure{,.in} to also use the -rpath linker option on non-Intel
Linux systems to allow for dynamic linking of Octave libraries. While
this change does not affect i386 systems, it fixes an important bug for
other Debian architectures and should go into frozen (fixes #23674)
* Changed debian/rules to use --with-f2c argument for configure under
m68k, and --with-g77 (from the egcs suite) under i386, sparc and alpha.
octave (2.0.13-3) unstable; urgency=low
* Changed debian/rules to set CC=egcc only after an explicit test for
either of i386, alpha or sparc (fixes #23293)
octave (2.0.13-2) frozen unstable; urgency=low
* Reuploaded stable release 2.0.13 to replace the test-release 2.0.12.90 in
'frozen' which corrects one serious bug in 2.0.12.90 (fixes #22807)
* Changed /etc/emacs/site-start.d/50octave.el to add a flavour-dependent
directory to emacs load-path
octave (2.0.13-1) unstable; urgency=low
* Upgraded to new upstream release 2.0.13
octave (2.0.12.91-1) unstable; urgency=low
* Upgraded to new upstream test-release 2.0.12.91
octave (2.0.12.90-1) unstable frozen; urgency=low
* Upgraded to new upstream test-release 2.0.12.90 (fixes #22424)
* Changed debian/rules to remove usr/info/dir (fixes #22491)
octave (2.0.12-1) unstable frozen; urgency=low
* Upgraded to new upstream version.
octave (2.0.11.94-1) unstable; urgency=low
* Upgraded to new upstream test-release 2.0.11.94
octave (2.0.11.93-1) unstable; urgency=low
* Upgraded to new upstream test-release 2.0.11.93
* Adapted to new Emacsen policy (fixes #20372, #21222)
* Converted debian/rules to debhelper
octave (2.0.11.92-3) unstable; urgency=low
* Fixed dependency on info to "info (>= 3.12)"
octave (2.0.11.92-2) unstable; urgency=low,
* Added Depends: on "info (>= 3.12-1) | info-browser" to debian/control
as Octave no longer comes with an info binary
* Added explicit setting of INFO_PROGRAM = "/usr/bin/info" to
/etc/octave.conf as the default INFO_PROGRAM still points to the old
location
octave (2.0.11.92-1) unstable; urgency=low
* Upgraded to new upstream test-release 2.0.11.92
* Compiled with libstdc++2.8_2.90.27-0.6 which provides a correctly
versioned shlibs file (fixes #20033, #20978)
octave (2.0.11.91-1) unstable; urgency=low
* Upgraded to new upstream test-release 2.0.11.91
* This fixes a couple of small bugs, one of them dear to to fellow
Debianer Jim van Zandt, and as a test-release might as well go into
our current 'unstable' distribution. I have used previous pre-releases
and they work just as well --- call it the pre-patch methodology
spreading into application space ;-)
octave (2.0.11-2) frozen unstable; urgency=low
* Compilation with new gcc/g77/g++ 2.90.26 based on egcs
* Changed debian/rules by adding a Perl one-liner substition so that
/usr/bin/octave-bug will use tempfile(1) to create a temporary
filename; also sent the sources for debianutils-1.8 upstream so that
they might be included in the next release (fixes #19804)
octave (2.0.11-1) unstable; urgency=low
* Upgraded to new upstream version
octave (2.0.10-2) unstable; urgency=low
* Compilation with f2c instead of g77 in order to get a libc6 version
going (see bug report #17963 filed against g77)
* Added Replaces: octave (<= 2.0.5-2) to control for octave-staticlibs
to cleanly replace the static libraries from the older octave package
as well as an explicit version number for the Depends: on octave
(thanks to Richard Braakman for the hints)
* Fixed FSF address in copyright (lintian)
* Made octave.rc to /etc/octave.conf symlink absolute (lintian)
* Created links to ../man7/undocumented.7.gz in lieu of manual pages
for the two utility scripts octave-bug and mkoctfile (lintian)
octave (2.0.10-1) unstable; urgency=low
* Upgraded to new upstream version
* This version is compiled on a libc5 system as g77/gcc and eg77/egcc
(including the new {gcc,g77}_2.90.23-1) both die on some legacy
Fortran code on a libc6 system. Major bummer.
octave (2.0.9-2) unstable; urgency=low
* Compiled with GNU libc2 aka libc6 (fixes bug #11739)
* Create a new file /usr/share/octave/ls-R file from the postinst
* Now ships the unmodified upstream source as octave_2.0.9.orig.tar.gz
* Byte-compile the octave-{mod,hlp,inf}.el files
* Includes two newer octave-{mod,inf} files and add an elisp startup
file /etc/emacs/site-start.d/50octave.el (thanks to Nils Naumann)
octave (2.0.9-1) unstable; urgency=low
* Upgraded to new upstream version
octave (2.0.8-1) unstable; urgency=low
* Upgraded to new upstream version
octave (2.0.7-1) unstable; urgency=low
* upgraded to new upstream version (bug #10419)
octave (2.0.6-1) unstable; urgency=low
* upgraded to new upstream version
octave (2.0.5-3) unstable; urgency=low
* added creation of /usr/local/share/octave/site-m in the postinst if
/usr/local filesystem is writable and removal of the directories
/usr/local/share/octave/site-m and /usr/local/share/octave/site-m in
the prerm if they are empty to reflect Debian policy on /usr/local/
* moved configuration file /usr/share/octave/site/m/startup/octaverc
into /etc/octave.conf and provided a softlink from the default location
* added LOADPATH setting to octave.conf aka octaverc for the local tree
* made /etc/octave.conf a conffile
* moved static libs into a seperate package (which is not needed for
normal use of octave) --- this saves 4.4 MB of diskspace
* patched mkoctfile.in to add a flag for stripping to /usr/bin/mkoctfile
* changed configure to explicit setting of host architecture
octave (2.0.5-2) unstable; urgency=low
* rewrote debian/rules:
- configure for dynamic loading, shared libs and lite kernel which
allows dynamic extension of the octave language via user provided
C++ programs; examples are in /usr/doc/octave/examples
- configure prefix /usr; install prefix debian/tmp/usr (fixes bug #8139)
- configure for libs in /usr/lib/octave to avoid clashed
- include upstream postscript docs
* rewrote Description in debian/control:
* changed Priority: to optional as per overrides file
* changed Suggests: from info to virtual package info-browser
* created new package octave-doc for postscript docs on octave
* updated debian/copyright
* new maintainer
octave (2.0.5-1) unstable; urgency=low
* tracking upstream source, upgraded to newest release
* put *.el files back in /usr/lib/emacs/site-lisp bug #7457
* also bugs #7144, 7282, and 7532 are fixed with this release.
octave (2.0.2-2) unstable; urgency=low
* bug#7020 removed static libraries from the installation
* bug#7021 corrected spelling errors
* applied patch from upstream for pipes fix
octave (2.0.2-1) unstable; urgency=low
* New upstream source
octave (2.0.1-2) unstable; urgency=low
* corrected unreferenced dependencies
octave (2.0.1-1) unstable; urgency=low
* Bug# 6028, 6044, 6416, Moved to newer release.
* Bug# 5096, referenced binary no longer exists.
octave (1.1.1-8) frozen unstable; urgency=low
* built with static libc5.2.18
octave (1.1.1-7) unstable; urgency=low
* converted to Standards-Version 2.1.0.0
-- Stephan Hermann <email address hidden> Mon, 28 Jan 2008 15:26:05 +0000
Upload details
- Uploaded by:
- Stephan Rügamer
- Uploaded to:
- Hardy
- Original maintainer:
- Debian Octave Group
- Architectures:
- any
- Section:
- math
- Urgency:
- Medium Urgency
See full publishing history Publishing
| Series | Published | Component | Section |
|---|
Downloads
| File | Size | SHA-256 Checksum |
|---|---|---|
| octave3.0_3.0.0.orig.tar.gz | 10.7 MiB | b99b6e2c1a0977fbe2f0c19210694ed44ff182d17d3920c485fb6ce725b89816 |
| octave3.0_3.0.0-1.diff.gz | 50.8 KiB | 00cbec03a92ee3528e0db5aca38e01e31b60ee215d3cb5248922b574bf9fefb2 |
| octave3.0_3.0.0-1.dsc | 1.3 KiB | 9a214cca272bf84e94243c319e0e0f443c97d46f656b673b3a62a5e22cbf4354 |
Binary packages built by this source
- octave3.0: No summary available for octave3.0 in ubuntu hardy.
No description available for octave3.0 in ubuntu hardy.
- octave3.0-doc: No summary available for octave3.0-doc in ubuntu hardy.
No description available for octave3.0-doc in ubuntu hardy.
- octave3.0-emacsen: No summary available for octave3.0-emacsen in ubuntu hardy.
No description available for octave3.0-emacsen in ubuntu hardy.
- octave3.0-headers: No summary available for octave3.0-headers in ubuntu hardy.
No description available for octave3.0-headers in ubuntu hardy.
- octave3.0-htmldoc: No summary available for octave3.0-htmldoc in ubuntu hardy.
No description available for octave3.0-htmldoc in ubuntu hardy.
- octave3.0-info: No summary available for octave3.0-info in ubuntu hardy.
No description available for octave3.0-info in ubuntu hardy.
