Dear Emmet, I solved the problem fixing the bug. My problem was unable to send files from smartphone to notebook! I found the fix in launchpad.net! ;)
My system:
notebook: acer travelmate 4230
OS: linux ubuntu 8.04 64bit

Have a nice day
:)


---------- Initial Header -----------

From      : <email address hidden>
To          : <email address hidden>
Cc          : 
Date      : Fri, 01 Aug 2008 09:27:55 -0000
Subject : [Bug 211252] Re: Cannot recieve files using bluetooth







> I'm a little confused about this bug, as it seems to describe several
> issues over some time.  I believe that none of the issues are present in
> Hardy, but would like confirmation from the reporters that I have
> accurately understood the problem.
> 
> The following three issues seem described:
> 1) Problems receiving files sent to the computer
> 2) Problems sending files from the computer
> 3) Problems browsing files on a remote device via bluetooth.
> 
> Description of my actions to attempt to repliate the issues from a base ubuntu-desktop install, with no adjustments to the default bluetooth configuration:
> A) Initiate bluetooth pairing from the remote device
> B) When prompted enter the PIN on the computer
> C) Attempt to send a file from the remote device
> D) In response to a "Connection Terminated" message, right-click the bluetooth applet, open Prefrences, and  select "Receive files from remote devices".
> E) Attept to send file from the remote device again
> F) Verify successful reception to desktop
> G) RIght click a different file on the desktop, select "Send to...", Bluetooth, remote device name, unpacked
> H) Verify receipt of sent file on remote device
> I) RIght-click the bluetooth applet, open "Browse Device", select the remote device, and see the remote device contents in Nautilus.
> 
>     In summary, it seems to work for me.  If someone experiencing issues
> could confirm that the procedure above does not work for them, and
> specifically where it breaks, it may be that this is a soluable bug.
> Otherwise, I'm tempted to mark it "Fix Released", based on various
> updates that have happened to the bluetooth stack, and it working for me
> in 8.04 (+updates), despite the clear confirmation from many that it was
> once a problem.
> 
> -- 
> Cannot recieve files using bluetooth
> https://bugs.launchpad.net/bugs/211252
> You received this bug notification because you are a direct subscriber
> of the bug.
> 
> Status in obex-data-server: Fix Released
> Status in "bluez-utils" source package in Ubuntu: Confirmed
> Status in "obex-data-server" source package in Ubuntu: Confirmed
> 
> Bug description:
> Binary package hint: obex-data-server
> 
> Description:	Ubuntu hardy (development branch)
> Release:	8.04
> 
> obex-data-server:
>   Installed: 0.3-0ubuntu1
>   Candidate: 0.3-0ubuntu1
>   Version table:
>  *** 0.3-0ubuntu1 0
>         500 http://archive.ubuntu.com hardy/main Packages
>         100 /var/lib/dpkg/status
> 
> I am trying to send files from a mobile phone ( N70 and W960i ) to my laptop using a usb dongle. The phone always complains "Failed to connect".
> 
> I remember this used to work when I had Gutsy and when i first upgraded to Hardy. I have all bluetooth related packages installed and updated, and using bluetooth-applet the laptop is discoverable and file receiving is enabled.
> 
> Expected :
> Sent file should be received.
> 
> What happened :
> 
> obex-data-server is running and creates its dbus service fine. I can send things from the laptop to the mobile. I have hcidump of the failed connection mobile --> laptop.
> 
> HCI sniffer - Bluetooth packet analyzer ver 1.40
> device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
> > HCI Event: Connect Request (0x04) plen 10
> < HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Connect Complete (0x03) plen 11
> < ACL data: handle 1 flags 0x02 dlen 10
>     L2CAP(s): Info req: type 2
> < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> > HCI Event: Command Status (0x0f) plen 4
> < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> > HCI Event: Max Slots Change (0x1b) plen 3
> > HCI Event: Command Complete (0x0e) plen 6
> < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 1 flags 0x02 dlen 12
>     L2CAP(s): Connect req: psm 1 scid 0x0040
> > HCI Event: Command Status (0x0f) plen 4
> < HCI Command: Remote Name Request (0x01|0x0019) plen 10
> < ACL data: handle 1 flags 0x02 dlen 16
>     L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
>       Connection successful
> > HCI Event: Connection Packet Type Changed (0x1d) plen 5
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Connection Packet Type Changed (0x1d) plen 5
> > ACL data: handle 1 flags 0x02 dlen 16
>     L2CAP(s): Info rsp: type 2 result 0
>       Extended feature mask 0x0003
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Read Remote Supported Features (0x0b) plen 11
> > ACL data: handle 1 flags 0x02 dlen 10
>     L2CAP(s): Info req: type 2
> < ACL data: handle 1 flags 0x02 dlen 16
>     L2CAP(s): Info rsp: type 2 result 0
>       Extended feature mask 0x0000
> > ACL data: handle 1 flags 0x02 dlen 12
>     L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> < ACL data: handle 1 flags 0x02 dlen 18
>     L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
>       Success
>       MTU 672 
> < ACL data: handle 1 flags 0x02 dlen 12
>     L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Remote Name Req Complete (0x07) plen 255
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 1 flags 0x02 dlen 18
>     L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
>       Success
>       MTU 672 
> > ACL data: handle 1 flags 0x02 dlen 17
>     L2CAP(d): cid 0x0040 len 13 [psm 1]
>         SDP SS Req: tid 0x1 len 0x8
>           pat uuid-16 0x1105 (OBEXObjPush)
>           max 65535
>           cont 00
> < ACL data: handle 1 flags 0x02 dlen 14
>     L2CAP(d): cid 0x0040 len 10 [psm 1]
>         SDP SS Rsp: tid 0x1 len 0x5
>           count 0
>           cont 00
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 1 flags 0x02 dlen 12
>     L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> < ACL data: handle 1 flags 0x02 dlen 12
>     L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> > HCI Event: Number of Completed Packets (0x13) plen 5
> < HCI Command: Disconnect (0x01|0x0006) plen 3
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Disconn Complete (0x05) plen 4
>