[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-20-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu3) ) #33-Ubuntu SMP Tue Mar 27 16:42:26 UTC 2012 (Ubuntu 3.2.0-20.33-generic 3.2.12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-20-generic root=UUID=25072a69-9f26-47ae-b61c-86ef7cbdb056 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable) [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfd78000 (usable) [ 0.000000] BIOS-e820: 00000000cfd78000 - 00000000cfd85000 (reserved) [ 0.000000] BIOS-e820: 00000000cfd85000 - 00000000cfe0f000 (usable) [ 0.000000] BIOS-e820: 00000000cfe0f000 - 00000000cfe97000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfe97000 - 00000000cfe99000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfe99000 - 00000000cfeef000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfeef000 - 00000000cfef2000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef2000 - 00000000cfef3000 (usable) [ 0.000000] BIOS-e820: 00000000cfef3000 - 00000000cfeff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfeff000 - 00000000cff00000 (usable) [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: /DP965LT, BIOS MQ96510J.86A.1749.2008.0727.0001 07/27/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x12c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0CFF00000 mask FFFF00000 uncachable [ 0.000000] 1 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0CFEAB000 mask FFFFFF000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fe200] fe200 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000008a000] 8a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff00000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff00000 page 4k [ 0.000000] kernel direct mapping tables up to cff00000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000012c000000 [ 0.000000] 0100000000 - 012c000000 page 2M [ 0.000000] kernel direct mapping tables up to 12c000000 @ cfe09000-cfe0f000 [ 0.000000] RAMDISK: 364e8000 - 3726c000 [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL ) [ 0.000000] ACPI: RSDT 00000000cfefd038 0004C (v01 INTEL DP965LT 000006D5 01000013) [ 0.000000] ACPI: FACP 00000000cfefc000 00074 (v01 INTEL DP965LT 000006D5 MSFT 01000013) [ 0.000000] ACPI: DSDT 00000000cfef7000 041E6 (v01 INTEL DP965LT 000006D5 MSFT 01000013) [ 0.000000] ACPI: FACS 00000000cfe99000 00040 [ 0.000000] ACPI: APIC 00000000cfef6000 00078 (v01 INTEL DP965LT 000006D5 MSFT 01000013) [ 0.000000] ACPI: WDDT 00000000cfef5000 00040 (v01 INTEL DP965LT 000006D5 MSFT 01000013) [ 0.000000] ACPI: MCFG 00000000cfef4000 0003C (v01 INTEL DP965LT 000006D5 MSFT 01000013) [ 0.000000] ACPI: ASF! 00000000cfef3000 000A6 (v32 INTEL DP965LT 000006D5 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000cfef1000 0020C (v01 INTEL CpuPm 000006D5 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000cfef0000 00175 (v01 INTEL Cpu0Ist 000006D5 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000cfeef000 00175 (v01 INTEL Cpu1Ist 000006D5 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000cfe98000 00175 (v01 INTEL Cpu2Ist 000006D5 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000cfe97000 00175 (v01 INTEL Cpu3Ist 000006D5 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000012c000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000012c000000 [ 0.000000] NODE_DATA [000000012bffb000 - 000000012bffffff] [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880127600000-ffff88012b5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0012c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000008f [ 0.000000] 0: 0x00000100 -> 0x000cfd78 [ 0.000000] 0: 0x000cfd85 -> 0x000cfe0f [ 0.000000] 0: 0x000cfef2 -> 0x000cfef3 [ 0.000000] 0: 0x000cfeff -> 0x000cff00 [ 0.000000] 0: 0x00100000 -> 0x0012c000 [ 0.000000] On node 0 totalpages: 1031555 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3898 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831044 pages, LIFO batch:31 [ 0.000000] Normal zone: 2816 pages used for memmap [ 0.000000] Normal zone: 177408 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfd78000 - 00000000cfd85000 [ 0.000000] PM: Registered nosave memory: 00000000cfe0f000 - 00000000cfe97000 [ 0.000000] PM: Registered nosave memory: 00000000cfe97000 - 00000000cfe99000 [ 0.000000] PM: Registered nosave memory: 00000000cfe99000 - 00000000cfeef000 [ 0.000000] PM: Registered nosave memory: 00000000cfeef000 - 00000000cfef2000 [ 0.000000] PM: Registered nosave memory: 00000000cfef3000 - 00000000cfeff000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012bc00000 s83072 r8192 d23424 u524288 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012350 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-20-generic root=UUID=25072a69-9f26-47ae-b61c-86ef7cbdb056 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3964500k/4915200k available (6565k kernel code, 788980k absent, 161720k reserved, 6639k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2397.740 MHz processor. [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4795.48 BogoMIPS (lpj=9590960) [ 0.008008] pid_max: default: 32768 minimum: 301 [ 0.008033] Security Framework initialized [ 0.008050] AppArmor: AppArmor initialized [ 0.008051] Yama: becoming mindful. [ 0.008480] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012213] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013148] Mount-cache hash table entries: 256 [ 0.013303] Initializing cgroup subsys cpuacct [ 0.013309] Initializing cgroup subsys memory [ 0.013318] Initializing cgroup subsys devices [ 0.013321] Initializing cgroup subsys freezer [ 0.013323] Initializing cgroup subsys blkio [ 0.013330] Initializing cgroup subsys perf_event [ 0.013361] CPU: Physical Processor ID: 0 [ 0.013363] CPU: Processor Core ID: 0 [ 0.013365] mce: CPU supports 6 MCE banks [ 0.013373] CPU0: Thermal monitoring enabled (TM2) [ 0.013377] using mwait in idle threads. [ 0.015765] ACPI: Core revision 20110623 [ 0.019246] ftrace: allocating 27049 entries in 107 pages [ 0.020403] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.061822] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 0.064003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.064003] PEBS disabled due to CPU errata. [ 0.064003] ... version: 2 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 3 [ 0.064003] ... event mask: 0000000700000003 [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] Booting Node 0, Processors #1 [ 0.064003] smpboot cpu 1: start_ip = 8a000 [ 0.152037] NMI watchdog enabled, takes one hw-pmu counter. [ 0.152077] Brought up 2 CPUs [ 0.152079] Total of 2 processors activated (9591.04 BogoMIPS). [ 0.153874] devtmpfs: initialized [ 0.153874] EVM: security.selinux [ 0.153874] EVM: security.SMACK64 [ 0.153874] EVM: security.capability [ 0.153874] PM: Registering ACPI NVS region at cfe0f000 (557056 bytes) [ 0.153874] PM: Registering ACPI NVS region at cfe99000 (352256 bytes) [ 0.153874] print_constraints: dummy: [ 0.153874] RTC time: 1:10:55, date: 04/16/12 [ 0.153874] NET: Registered protocol family 16 [ 0.153874] Trying to unpack rootfs image as initramfs... [ 0.153874] ACPI: bus type pci registered [ 0.153874] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.156014] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.188993] PCI: Using configuration type 1 for base access [ 0.192087] bio: create slab at 0 [ 0.192143] ACPI: Added _OSI(Module Device) [ 0.192145] ACPI: Added _OSI(Processor Device) [ 0.192147] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.192149] ACPI: Added _OSI(Processor Aggregator Device) [ 0.192963] ACPI: EC: Look up EC in DSDT [ 0.194761] ACPI: Interpreter enabled [ 0.194765] ACPI: (supports S0 S3 S4 S5) [ 0.194780] ACPI: Using IOAPIC for interrupt routing [ 0.198267] ACPI: No dock devices found. [ 0.198270] HEST: Table not found. [ 0.198273] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.198799] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.199836] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.199839] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.199841] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.199844] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] [ 0.199846] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff] [ 0.199848] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xefffffff] [ 0.199862] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600 [ 0.199905] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604 [ 0.199949] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.199952] pci 0000:00:01.0: PME# disabled [ 0.199968] pci 0000:00:03.0: [8086:29a4] type 0 class 0x000780 [ 0.199983] pci 0000:00:03.0: reg 10: [mem 0xe3225900-0xe322590f 64bit] [ 0.200033] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.200040] pci 0000:00:03.0: PME# disabled [ 0.200079] pci 0000:00:19.0: [8086:104b] type 0 class 0x000200 [ 0.200095] pci 0000:00:19.0: reg 10: [mem 0xe3200000-0xe321ffff] [ 0.200103] pci 0000:00:19.0: reg 14: [mem 0xe3224000-0xe3224fff] [ 0.200111] pci 0000:00:19.0: reg 18: [io 0x30c0-0x30df] [ 0.200165] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.200168] pci 0000:00:19.0: PME# disabled [ 0.200184] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.200220] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf] [ 0.200250] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.200289] pci 0000:00:1a.1: reg 20: [io 0x3080-0x309f] [ 0.200328] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.200345] pci 0000:00:1a.7: reg 10: [mem 0xe3225400-0xe32257ff] [ 0.200422] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.200426] pci 0000:00:1a.7: PME# disabled [ 0.200447] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.200461] pci 0000:00:1b.0: reg 10: [mem 0xe3220000-0xe3223fff 64bit] [ 0.200526] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.200530] pci 0000:00:1b.0: PME# disabled [ 0.200548] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.200614] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.200617] pci 0000:00:1c.0: PME# disabled [ 0.200639] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.200703] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.200706] pci 0000:00:1c.1: PME# disabled [ 0.200726] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604 [ 0.200793] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.200797] pci 0000:00:1c.2: PME# disabled [ 0.200817] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 [ 0.200881] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.200884] pci 0000:00:1c.3: PME# disabled [ 0.200906] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.200970] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.200974] pci 0000:00:1c.4: PME# disabled [ 0.200995] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.201032] pci 0000:00:1d.0: reg 20: [io 0x3060-0x307f] [ 0.201061] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.201098] pci 0000:00:1d.1: reg 20: [io 0x3040-0x305f] [ 0.201127] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.201167] pci 0000:00:1d.2: reg 20: [io 0x3020-0x303f] [ 0.201205] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.201223] pci 0000:00:1d.7: reg 10: [mem 0xe3225000-0xe32253ff] [ 0.201301] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.201305] pci 0000:00:1d.7: PME# disabled [ 0.201321] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.201380] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601 [ 0.201458] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.201502] pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101 [ 0.201514] pci 0000:00:1f.2: reg 10: [io 0x3438-0x343f] [ 0.201522] pci 0000:00:1f.2: reg 14: [io 0x344c-0x344f] [ 0.201530] pci 0000:00:1f.2: reg 18: [io 0x3430-0x3437] [ 0.201538] pci 0000:00:1f.2: reg 1c: [io 0x3448-0x344b] [ 0.201545] pci 0000:00:1f.2: reg 20: [io 0x3410-0x341f] [ 0.201554] pci 0000:00:1f.2: reg 24: [io 0x3400-0x340f] [ 0.201582] pci 0000:00:1f.2: PME# supported from D3hot [ 0.201585] pci 0000:00:1f.2: PME# disabled [ 0.201598] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.201608] pci 0000:00:1f.3: reg 10: [mem 0xe3225800-0xe32258ff] [ 0.201634] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] [ 0.201664] pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101 [ 0.201677] pci 0000:00:1f.5: reg 10: [io 0x3428-0x342f] [ 0.201685] pci 0000:00:1f.5: reg 14: [io 0x3444-0x3447] [ 0.201694] pci 0000:00:1f.5: reg 18: [io 0x3420-0x3427] [ 0.201702] pci 0000:00:1f.5: reg 1c: [io 0x3440-0x3443] [ 0.201710] pci 0000:00:1f.5: reg 20: [io 0x30f0-0x30ff] [ 0.201718] pci 0000:00:1f.5: reg 24: [io 0x30e0-0x30ef] [ 0.201745] pci 0000:00:1f.5: PME# supported from D3hot [ 0.201748] pci 0000:00:1f.5: PME# disabled [ 0.201788] pci 0000:01:00.0: [10de:0193] type 0 class 0x000300 [ 0.201797] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff] [ 0.201807] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.201817] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit] [ 0.201824] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.201831] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.201869] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.201877] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.201880] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.201883] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe2ffffff] [ 0.201887] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.201925] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.201985] pci 0000:03:00.0: [11ab:6101] type 0 class 0x000101 [ 0.202000] pci 0000:03:00.0: reg 10: [io 0x1018-0x101f] [ 0.202012] pci 0000:03:00.0: reg 14: [io 0x1024-0x1027] [ 0.202024] pci 0000:03:00.0: reg 18: [io 0x1010-0x1017] [ 0.202035] pci 0000:03:00.0: reg 1c: [io 0x1020-0x1023] [ 0.202047] pci 0000:03:00.0: reg 20: [io 0x1000-0x100f] [ 0.202058] pci 0000:03:00.0: reg 24: [mem 0xe3100000-0xe31001ff] [ 0.202121] pci 0000:03:00.0: supports D1 [ 0.202123] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.202128] pci 0000:03:00.0: PME# disabled [ 0.202145] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.202153] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.202157] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.202161] pci 0000:00:1c.1: bridge window [mem 0xe3100000-0xe31fffff] [ 0.202202] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.202245] pci 0000:00:1c.3: PCI bridge to [bus 05-05] [ 0.202287] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 0.202327] pci 0000:07:03.0: [104c:8023] type 0 class 0x000c00 [ 0.202344] pci 0000:07:03.0: reg 10: [mem 0xe3004000-0xe30047ff] [ 0.202353] pci 0000:07:03.0: reg 14: [mem 0xe3000000-0xe3003fff] [ 0.202419] pci 0000:07:03.0: supports D1 D2 [ 0.202421] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot [ 0.202426] pci 0000:07:03.0: PME# disabled [ 0.202467] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) [ 0.202473] pci 0000:00:1e.0: bridge window [mem 0xe3000000-0xe30fffff] [ 0.202478] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.202481] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.202483] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.202486] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode) [ 0.202488] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode) [ 0.202490] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xefffffff] (subtractive decode) [ 0.202518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.202655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.202754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.202791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.202823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.202855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.202887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.202952] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.202956] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.202957] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.207734] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.207787] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.207838] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.207887] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.207937] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) [ 0.207986] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 0.208041] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) [ 0.208092] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.208224] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.208227] vgaarb: loaded [ 0.208229] vgaarb: bridge control possible 0000:01:00.0 [ 0.208340] i2c-core: driver [aat2870] using legacy suspend method [ 0.208342] i2c-core: driver [aat2870] using legacy resume method [ 0.208408] SCSI subsystem initialized [ 0.208462] libata version 3.00 loaded. [ 0.208507] usbcore: registered new interface driver usbfs [ 0.208518] usbcore: registered new interface driver hub [ 0.208547] usbcore: registered new device driver usb [ 0.208637] PCI: Using ACPI for IRQ routing [ 0.211298] PCI: pci_cache_line_size set to 64 bytes [ 0.211384] reserve RAM buffer: 000000000008f000 - 000000000008ffff [ 0.211387] reserve RAM buffer: 00000000cfd78000 - 00000000cfffffff [ 0.211390] reserve RAM buffer: 00000000cfe0f000 - 00000000cfffffff [ 0.211392] reserve RAM buffer: 00000000cfef3000 - 00000000cfffffff [ 0.211395] reserve RAM buffer: 00000000cff00000 - 00000000cfffffff [ 0.211499] NetLabel: Initializing [ 0.211501] NetLabel: domain hash size = 128 [ 0.211502] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.211515] NetLabel: unlabeled traffic allowed by default [ 0.219159] AppArmor: AppArmor Filesystem Enabled [ 0.219190] pnp: PnP ACPI init [ 0.219206] ACPI: bus type pnp registered [ 0.219773] pnp 00:00: [bus 00-ff] [ 0.219776] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.219778] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.219780] pnp 00:00: [io 0x0d00-0xffff window] [ 0.219782] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.219784] pnp 00:00: [mem 0x000e0000-0x000effff window] [ 0.219787] pnp 00:00: [mem 0xf8000000-0xfeafffff window] [ 0.219789] pnp 00:00: [mem 0xd0000000-0xefffffff window] [ 0.219844] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.219855] pnp 00:01: [mem 0xf0000000-0xf7ffffff] [ 0.219857] pnp 00:01: [mem 0xfed13000-0xfed13fff] [ 0.219859] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.219861] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.219863] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.219864] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.219867] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 0.219868] pnp 00:01: [mem 0xfed45000-0xfed99fff] [ 0.219870] pnp 00:01: [mem 0x000c0000-0x000dffff] [ 0.219872] pnp 00:01: [mem 0x000e0000-0x000fffff] [ 0.219935] system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.219938] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved [ 0.219940] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.219943] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.219945] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.219948] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.219950] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.219953] system 00:01: [mem 0xfed45000-0xfed99fff] has been reserved [ 0.219955] system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.219958] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.219961] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220082] pnp 00:02: [io 0x0000-0x000f] [ 0.220084] pnp 00:02: [io 0x0081-0x0083] [ 0.220086] pnp 00:02: [io 0x0087] [ 0.220088] pnp 00:02: [io 0x0089-0x008b] [ 0.220090] pnp 00:02: [io 0x008f] [ 0.220091] pnp 00:02: [io 0x00c0-0x00df] [ 0.220094] pnp 00:02: [dma 4] [ 0.220125] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.220134] pnp 00:03: [io 0x0070-0x0071] [ 0.220136] pnp 00:03: [io 0x0074-0x0077] [ 0.220146] pnp 00:03: [irq 8] [ 0.220175] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.220185] pnp 00:04: [io 0x00f0] [ 0.220190] pnp 00:04: [irq 13] [ 0.220216] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.220225] pnp 00:05: [io 0x0061] [ 0.220254] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.220264] pnp 00:06: [io 0x0500-0x053f] [ 0.220266] pnp 00:06: [io 0x0400-0x047f] [ 0.220267] pnp 00:06: [io 0x0092] [ 0.220269] pnp 00:06: [io 0x0360-0x0361] [ 0.220271] pnp 00:06: [io 0x0680-0x06ff] [ 0.220272] pnp 00:06: [io 0x0010-0x001f] [ 0.220274] pnp 00:06: [io 0x0072-0x0073] [ 0.220278] pnp 00:06: [io 0x0080] [ 0.220280] pnp 00:06: [io 0x0084-0x0086] [ 0.220282] pnp 00:06: [io 0x0088] [ 0.220283] pnp 00:06: [io 0x008c-0x008e] [ 0.220285] pnp 00:06: [io 0x0090-0x009f] [ 0.220343] system 00:06: [io 0x0500-0x053f] has been reserved [ 0.220346] system 00:06: [io 0x0400-0x047f] has been reserved [ 0.220348] system 00:06: [io 0x0360-0x0361] has been reserved [ 0.220351] system 00:06: [io 0x0680-0x06ff] has been reserved [ 0.220354] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220613] pnp 00:07: [io 0x0378-0x037f] [ 0.220615] pnp 00:07: [io 0x0778-0x077f] [ 0.220620] pnp 00:07: [irq 7] [ 0.220622] pnp 00:07: [dma 0 disabled] [ 0.220684] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.220716] pnp 00:08: [io 0x0060] [ 0.220718] pnp 00:08: [io 0x0064] [ 0.220723] pnp 00:08: [irq 1] [ 0.220752] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.220855] pnp 00:09: [io 0x03f8-0x03ff] [ 0.220860] pnp 00:09: [irq 4] [ 0.220926] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.221000] pnp 00:0a: [mem 0xfec00000-0xfec000ff] [ 0.221035] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active) [ 0.221081] pnp: PnP ACPI: found 11 devices [ 0.221083] ACPI: ACPI bus type pnp unregistered [ 0.227384] Switching to clocksource acpi_pm [ 0.227670] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.227675] PCI: max bus depth: 1 pci_try_num: 2 [ 0.227728] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 0.227732] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.227736] pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff] [ 0.227739] pci 0000:00:1c.3: BAR 14: assigned [mem 0xf8400000-0xf85fffff] [ 0.227742] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.227745] pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff] [ 0.227748] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8800000-0xf89fffff] [ 0.227751] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8a00000-0xf8bfffff 64bit pref] [ 0.227754] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] [ 0.227758] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8c00000-0xf8dfffff 64bit pref] [ 0.227761] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8e00000-0xf8ffffff] [ 0.227764] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf9000000-0xf91fffff 64bit pref] [ 0.227767] pci 0000:00:1c.0: BAR 13: assigned [io 0x7000-0x7fff] [ 0.227771] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.227774] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.227776] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.227780] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe2ffffff] [ 0.227783] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.227787] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.227790] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff] [ 0.227794] pci 0000:00:1c.0: bridge window [mem 0xf8e00000-0xf8ffffff] [ 0.227798] pci 0000:00:1c.0: bridge window [mem 0xf9000000-0xf91fffff 64bit pref] [ 0.227804] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.227807] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.227811] pci 0000:00:1c.1: bridge window [mem 0xe3100000-0xe31fffff] [ 0.227815] pci 0000:00:1c.1: bridge window [mem 0xf8c00000-0xf8dfffff 64bit pref] [ 0.227821] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.227823] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] [ 0.227828] pci 0000:00:1c.2: bridge window [mem 0xf8800000-0xf89fffff] [ 0.227832] pci 0000:00:1c.2: bridge window [mem 0xf8a00000-0xf8bfffff 64bit pref] [ 0.227837] pci 0000:00:1c.3: PCI bridge to [bus 05-05] [ 0.227840] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.227844] pci 0000:00:1c.3: bridge window [mem 0xf8400000-0xf85fffff] [ 0.227848] pci 0000:00:1c.3: bridge window [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.227853] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 0.227856] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.227861] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf81fffff] [ 0.227864] pci 0000:00:1c.4: bridge window [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.227870] pci 0000:00:1e.0: PCI bridge to [bus 07-07] [ 0.227875] pci 0000:00:1e.0: bridge window [mem 0xe3000000-0xe30fffff] [ 0.227897] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.227901] pci 0000:00:01.0: setting latency timer to 64 [ 0.227912] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.227916] pci 0000:00:1c.0: setting latency timer to 64 [ 0.227922] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.227926] pci 0000:00:1c.1: setting latency timer to 64 [ 0.227935] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.227938] pci 0000:00:1c.2: setting latency timer to 64 [ 0.227947] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.227951] pci 0000:00:1c.3: setting latency timer to 64 [ 0.227957] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.227961] pci 0000:00:1c.4: setting latency timer to 64 [ 0.227967] pci 0000:00:1e.0: setting latency timer to 64 [ 0.227970] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.227973] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.227975] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.227977] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff] [ 0.227979] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff] [ 0.227981] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xefffffff] [ 0.227983] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.227986] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe2ffffff] [ 0.227989] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.227992] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff] [ 0.227995] pci_bus 0000:02: resource 1 [mem 0xf8e00000-0xf8ffffff] [ 0.227998] pci_bus 0000:02: resource 2 [mem 0xf9000000-0xf91fffff 64bit pref] [ 0.228001] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.228004] pci_bus 0000:03: resource 1 [mem 0xe3100000-0xe31fffff] [ 0.228007] pci_bus 0000:03: resource 2 [mem 0xf8c00000-0xf8dfffff 64bit pref] [ 0.228010] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] [ 0.228010] pci_bus 0000:04: resource 1 [mem 0xf8800000-0xf89fffff] [ 0.228010] pci_bus 0000:04: resource 2 [mem 0xf8a00000-0xf8bfffff 64bit pref] [ 0.228010] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] [ 0.228010] pci_bus 0000:05: resource 1 [mem 0xf8400000-0xf85fffff] [ 0.228010] pci_bus 0000:05: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.228010] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.228010] pci_bus 0000:06: resource 1 [mem 0xf8000000-0xf81fffff] [ 0.228010] pci_bus 0000:06: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.228010] pci_bus 0000:07: resource 1 [mem 0xe3000000-0xe30fffff] [ 0.228010] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] [ 0.228010] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] [ 0.228010] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] [ 0.228010] pci_bus 0000:07: resource 7 [mem 0x000e0000-0x000effff] [ 0.228010] pci_bus 0000:07: resource 8 [mem 0xf8000000-0xfeafffff] [ 0.228010] pci_bus 0000:07: resource 9 [mem 0xd0000000-0xefffffff] [ 0.228010] NET: Registered protocol family 2 [ 0.228010] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.228010] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.229490] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.229982] TCP: Hash tables configured (established 524288 bind 65536) [ 0.229985] TCP reno registered [ 0.229998] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.230037] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.230177] NET: Registered protocol family 1 [ 0.230209] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.230226] pci 0000:00:1a.0: PCI INT A disabled [ 0.230241] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.230257] pci 0000:00:1a.1: PCI INT B disabled [ 0.230267] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.230408] pci 0000:00:1a.7: PCI INT C disabled [ 0.230431] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.230446] pci 0000:00:1d.0: PCI INT A disabled [ 0.230453] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.230468] pci 0000:00:1d.1: PCI INT B disabled [ 0.230475] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.230490] pci 0000:00:1d.2: PCI INT C disabled [ 0.230498] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.230620] pci 0000:00:1d.7: PCI INT A disabled [ 0.230642] pci 0000:01:00.0: Boot video device [ 0.230650] PCI: CLS 64 bytes, default 64 [ 0.230652] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.230655] Placing 64MB software IO TLB between ffff8800cbd78000 - ffff8800cfd78000 [ 0.230657] software IO TLB at phys 0xcbd78000 - 0xcfd78000 [ 0.231013] audit: initializing netlink socket (disabled) [ 0.231023] type=2000 audit(1334538655.224:1): initialized [ 0.263566] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.287191] VFS: Disk quotas dquot_6.5.2 [ 0.287248] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.287753] fuse init (API version 7.17) [ 0.287840] msgmni has been set to 7743 [ 0.288155] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.288181] io scheduler noop registered [ 0.288183] io scheduler deadline registered [ 0.288215] io scheduler cfq registered (default) [ 0.288326] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.288356] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.288403] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.288436] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.288489] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.288522] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.288576] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.288610] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.288662] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.288695] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X [ 0.288749] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.288782] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X [ 0.288861] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.288884] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.288937] intel_idle: MWAIT substates: 0x20 [ 0.288939] intel_idle: does not run on family 6 model 15 [ 0.289012] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.289017] ACPI: Sleep Button [SLPB] [ 0.289069] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.289072] ACPI: Power Button [PWRF] [ 0.290085] ERST: Table is not found! [ 0.290087] GHES: HEST is not enabled! [ 0.290157] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.310514] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.412436] Freeing initrd memory: 13840k freed [ 0.504637] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.520310] Linux agpgart interface v0.103 [ 0.521997] brd: module loaded [ 0.522826] loop: module loaded [ 0.522995] ata_piix 0000:00:1f.2: version 2.13 [ 0.523010] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.523015] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.676057] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.676442] scsi0 : ata_piix [ 0.676537] scsi1 : ata_piix [ 0.676670] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3410 irq 14 [ 0.676674] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3418 irq 15 [ 0.676695] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.676723] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.676757] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.676982] scsi2 : ata_piix [ 0.677065] scsi3 : ata_piix [ 0.677152] ata3: SATA max UDMA/133 cmd 0x3428 ctl 0x3444 bmdma 0x30f0 irq 19 [ 0.677155] ata4: SATA max UDMA/133 cmd 0x3420 ctl 0x3440 bmdma 0x30f8 irq 19 [ 0.677218] pata_acpi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.677242] pata_acpi 0000:03:00.0: setting latency timer to 64 [ 0.677254] pata_acpi 0000:03:00.0: PCI INT A disabled [ 0.677559] Fixed MDIO Bus: probed [ 0.677578] tun: Universal TUN/TAP device driver, 1.6 [ 0.677580] tun: (C) 1999-2004 Max Krasnyansky [ 0.677639] PPP generic driver version 2.4.2 [ 0.677747] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.677761] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.677783] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.677786] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.677837] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.677863] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.681740] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.681753] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe3225400 [ 0.696035] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.696214] hub 1-0:1.0: USB hub found [ 0.696220] hub 1-0:1.0: 4 ports detected [ 0.696308] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.696320] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.696323] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.696370] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.696393] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.700265] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.700277] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3225000 [ 0.716053] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.716221] hub 2-0:1.0: USB hub found [ 0.716227] hub 2-0:1.0: 6 ports detected [ 0.716321] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.716333] uhci_hcd: USB Universal Host Controller Interface driver [ 0.716348] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.716354] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.716357] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.716407] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.716437] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0 [ 0.716559] hub 3-0:1.0: USB hub found [ 0.716563] hub 3-0:1.0: 2 ports detected [ 0.716624] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.716630] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.716633] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.716678] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.716706] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080 [ 0.716834] hub 4-0:1.0: USB hub found [ 0.716838] hub 4-0:1.0: 2 ports detected [ 0.716901] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.716907] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.716910] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.716955] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.716976] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060 [ 0.717094] hub 5-0:1.0: USB hub found [ 0.717098] hub 5-0:1.0: 2 ports detected [ 0.717159] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.717165] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.717168] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.717222] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.717242] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040 [ 0.717362] hub 6-0:1.0: USB hub found [ 0.717366] hub 6-0:1.0: 2 ports detected [ 0.717426] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.717432] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.717435] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.717480] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.717501] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020 [ 0.717628] hub 7-0:1.0: USB hub found [ 0.717632] hub 7-0:1.0: 2 ports detected [ 0.717740] usbcore: registered new interface driver libusual [ 0.717772] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.717774] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.718515] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.718624] mousedev: PS/2 mouse device common for all mice [ 0.718780] rtc_cmos 00:03: RTC can wake from S4 [ 0.718884] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.718904] rtc0: alarms up to one month, 114 bytes nvram [ 0.718980] device-mapper: uevent: version 1.0.3 [ 0.719054] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.719062] cpuidle: using governor ladder [ 0.719064] cpuidle: using governor menu [ 0.719065] EFI Variables Facility v0.08 2004-May-17 [ 0.719285] TCP cubic registered [ 0.719385] NET: Registered protocol family 10 [ 0.719835] NET: Registered protocol family 17 [ 0.719849] Registering the dns_resolver key type [ 0.719974] PM: Hibernation image not present or could not be loaded. [ 0.719987] registered taskstats version 1 [ 0.736080] Magic number: 8:906:154 [ 0.736108] bdi 1:6: hash matches [ 0.736140] acpi device:21: hash matches [ 0.736179] rtc_cmos 00:03: setting system clock to 2012-04-16 01:10:55 UTC (1334538655) [ 0.737265] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.737267] EDD information not available. [ 0.749150] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.006636] ata4: SATA link down (SStatus 0 SControl 300) [ 1.017240] ata3: SATA link down (SStatus 0 SControl 300) [ 1.248039] Refined TSC clocksource calibration: 2397.604 MHz. [ 1.248045] Switching to clocksource tsc [ 1.268041] usb 6-2: new low-speed USB device number 2 using uhci_hcd [ 1.472123] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.472136] ata2.01: SATA link down (SStatus 4 SControl 300) [ 1.472256] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.472268] ata1.01: SATA link down (SStatus 4 SControl 300) [ 1.523408] ata1.00: ATA-7: ST3250620AS, 3.AAJ, max UDMA/133 [ 1.523412] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.527792] ata2.00: ATA-7: ST3250620AS, 3.AAJ, max UDMA/133 [ 1.527795] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.590037] ata1.00: configured for UDMA/133 [ 1.590173] scsi 0:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5 [ 1.590322] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.590351] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.590373] sd 0:0:0:0: [sda] Write Protect is off [ 1.590376] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.590401] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.594423] ata2.00: configured for UDMA/133 [ 1.594519] scsi 1:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5 [ 1.594661] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.594682] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.594709] sd 1:0:0:0: [sdb] Write Protect is off [ 1.594712] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.594742] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.647384] sda: sda1 sda2 < sda5 > [ 1.647749] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.659212] sdb: sdb1 [ 1.659488] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.661004] Freeing unused kernel memory: 920k freed [ 1.661201] Write protecting the kernel read-only data: 12288k [ 1.666344] Freeing unused kernel memory: 1608k freed [ 1.670482] Freeing unused kernel memory: 1200k freed [ 1.684026] usb 7-1: new low-speed USB device number 2 using uhci_hcd [ 1.685155] udevd[93]: starting version 175 [ 1.731304] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 1.731308] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.731355] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.731366] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.731486] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 1.749258] pata_marvell 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.749285] pata_marvell 0000:03:00.0: setting latency timer to 64 [ 1.755900] scsi4 : pata_marvell [ 1.757489] scsi5 : pata_marvell [ 1.757549] ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 17 [ 1.757552] ata6: DUMMY [ 1.774728] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input3 [ 1.774892] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0 [ 1.774910] usbcore: registered new interface driver usbhid [ 1.774912] usbhid: USB HID core driver [ 1.920521] ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB04, max UDMA/33 [ 1.936357] ata5.00: configured for UDMA/33 [ 1.937629] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB04 PQ: 0 ANSI: 5 [ 1.943101] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.943105] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.943264] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.943427] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 1.944774] firewire_ohci 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.000106] firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 2.002049] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.002052] EXT4-fs (sda1): write access will be enabled during recovery [ 2.042266] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:19:d1:2e:92:e9 [ 2.042269] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 2.042292] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF [ 2.500256] firewire_core: created device fw0: GUID 0090270001da8362, S400 [ 5.869391] EXT4-fs (sda1): recovery complete [ 5.869688] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 11.663366] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.692959] udevd[314]: starting version 175 [ 11.809199] lp: driver loaded but no devices found [ 11.830452] Adding 4124668k swap on /dev/sda5. Priority:-1 extents:1 across:4124668k [ 11.864975] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 11.874640] type=1400 audit(1334538666.635:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=507 comm="apparmor_parser" [ 11.875027] type=1400 audit(1334538666.635:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=507 comm="apparmor_parser" [ 11.875247] type=1400 audit(1334538666.635:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=507 comm="apparmor_parser" [ 11.876568] mei 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.876573] mei 0000:00:03.0: setting latency timer to 64 [ 11.876615] mei 0000:00:03.0: irq 47 for MSI/MSI-X [ 11.881549] generic-usb 0003:046D:C216.0002: usb_submit_urb(ctrl) failed [ 11.881593] generic-usb 0003:046D:C216.0002: timeout initializing reports [ 11.883316] input: Logitech Logitech Dual Action as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input4 [ 11.883447] generic-usb 0003:046D:C216.0002: input,hidraw1: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:00:1d.2-1/input0 [ 11.883536] parport_pc 00:07: reported by Plug and Play ACPI [ 11.883616] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 11.980153] lp0: using parport0 (interrupt-driven). [ 12.057148] ppdev: user-space parallel port driver [ 12.063386] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.063436] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 12.063460] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 12.336322] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 12.336447] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 12.336546] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 12.336618] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 12.524051] nvidia: module license 'NVIDIA' taints kernel. [ 12.524056] Disabling lock debugging due to kernel taint [ 12.552490] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.600741] init: flush-early-job-log main process (725) terminated with status 1 [ 12.608484] init: failsafe main process (723) killed by TERM signal [ 12.727279] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.727286] nvidia 0000:01:00.0: setting latency timer to 64 [ 12.727291] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 12.727458] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 [ 12.824247] type=1400 audit(1334538667.587:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=769 comm="apparmor_parser" [ 12.824304] type=1400 audit(1334538667.587:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=770 comm="apparmor_parser" [ 12.824700] type=1400 audit(1334538667.587:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=770 comm="apparmor_parser" [ 12.824923] type=1400 audit(1334538667.587:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=770 comm="apparmor_parser" [ 12.828809] type=1400 audit(1334538667.591:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=777 comm="apparmor_parser" [ 12.829277] type=1400 audit(1334538667.591:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=777 comm="apparmor_parser" [ 12.832763] type=1400 audit(1334538667.595:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=778 comm="apparmor_parser" [ 12.892737] Bluetooth: Core ver 2.16 [ 12.892785] NET: Registered protocol family 31 [ 12.892788] Bluetooth: HCI device and connection manager initialized [ 12.892790] Bluetooth: HCI socket layer initialized [ 12.892792] Bluetooth: L2CAP socket layer initialized [ 12.892949] Bluetooth: SCO socket layer initialized [ 12.902682] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.902685] Bluetooth: BNEP filters: protocol multicast [ 12.905238] Bluetooth: RFCOMM TTY layer initialized [ 12.905243] Bluetooth: RFCOMM socket layer initialized [ 12.905245] Bluetooth: RFCOMM ver 1.11