Randomness...I setup my system to automatically login, but it seems to boot up and let me start a terminal only to show the login prompt (that I can't see).  I've worked around it, but that seems broken too and might stop others from even using their system.

Inside broken install sudo xrandr -q gives...

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1920 x 1200, maximum 1920 x 1200
default connected 1920x1200+0+0 0mm x 0mm
   1920x1200      50.0* 
   1920x1080      51.0     52.0     53.0     54.0     55.0     56.0     57.0  
   1680x1050      58.0     59.0  
   1600x1200      60.0  
   1600x1024      61.0  
   1440x900       62.0  
   1400x1050      63.0     64.0     65.0  
   1360x768       66.0     67.0  
   1280x1024      68.0     69.0     70.0  
   1280x960       71.0     72.0     73.0  
   1280x720       74.0     75.0     76.0  
   1152x864       77.0     78.0     79.0     80.0     81.0     82.0     83.0  
   1024x768       84.0     85.0     86.0     87.0     88.0     89.0  
   960x720        90.0     91.0  
   960x600        92.0  
   960x540        93.0  
   928x696        94.0     95.0  
   896x672        96.0     97.0  
   840x525        98.0     99.0    100.0    101.0    102.0  
   832x624       103.0  
   800x600       104.0    105.0    106.0    107.0    108.0    109.0    110.0    111.0    112.0    113.0  
   800x512       114.0  
   720x576       115.0  
   720x480       116.0    117.0  
   720x450       118.0  
   720x400       119.0  
   700x525       120.0    121.0    122.0    123.0  
   680x384       124.0    125.0  
   640x512       126.0    127.0    128.0  
   640x480       129.0    130.0    131.0    132.0    133.0    134.0    135.0  
   640x400       136.0  
   640x350       137.0  
   576x432       138.0    139.0    140.0    141.0    142.0    143.0    144.0  
   512x384       145.0    146.0    147.0    148.0    149.0  
   416x312       150.0  
   400x300       151.0    152.0    153.0    154.0    155.0  
   360x200       156.0  
   320x240       157.0    158.0    159.0    160.0  
   320x200       161.0  
   320x175       162.0 


And sudo get-edid | parse-edid gives...

parse-edid: parse-edid version 2.0.0
get-edid: get-edid version 2.0.0

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
	Function supported
	Call successful

	VBE version 300
	VBE string at 0x11100 "NVIDIA"

VBE/DDC service about to be called
	Report DDC capabilities

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
	Function supported
	Call successful

	Monitor and video card combination does not support DDC1 transfers
	Monitor and video card combination supports DDC2 transfers
	0 seconds per 128 byte EDID block transfer
	Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
	Read EDID

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
	Function supported
	Call successful

parse-edid: EDID checksum passed.
parse-edid: first bytes don't match EDID version 1 header
parse-edid: do not trust output (if any).

	# EDID version 131 revision 1
Section "Monitor"
	Identifier "@XA:1f14"
	VendorName "@XA"
	ModelName "@XA:1f14"
	# DPMS capabilities: Active off:no  Suspend:no  Standby:no

	Mode 	"37x68"	# vfreq 714.533Hz, hfreq 72.168kHz
		DotClock	113.520000
		HTimings	37 37 195 1573
		VTimings	68 116 133 101
	EndMode
	Mode 	"85x68"	# vfreq 632.173Hz, hfreq 63.849kHz
		DotClock	103.500000
		HTimings	85 85 115 1621
		VTimings	68 108 152 101
	EndMode
	Mode 	"150x68"	# vfreq 933.019Hz, hfreq 94.235kHz
		DotClock	158.880000
		HTimings	150 150 212 1686
		VTimings	68 100 134 101
	EndMode
	Mode 	"69x68"	# vfreq 682.243Hz, hfreq 68.907kHz
		DotClock	112.800000
		HTimings	69 69 99 1637
		VTimings	68 68 68 101
	EndMode
EndSection