[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-26-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #48-Ubuntu SMP Wed Nov 24 10:14:11 UTC 2010 (Ubuntu 2.6.32-26.48-generic 2.6.32.24+drm33.11) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=662790d6-b22c-44c5-aae8-524524d378e4 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] modified: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] modified: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] modified: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 12000-14000 [ 0.000000] RAMDISK: 3721b000 - 37fef5ce [ 0.000000] ACPI: RSDP 00000000000fb8b0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cff90000 0003C (v01 091009 RSDT1249 20090910 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90200 00084 (v01 091009 FACP1249 20090910 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557) [ 0.000000] ACPI: DSDT 00000000cff90450 0E2DE (v01 A1153 A1153000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cffa8000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 0007C (v01 091009 APIC1249 20090910 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 091009 OEMMCFG 20090910 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 091009 OEMB1249 20090910 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff9f450 00038 (v01 091009 OEMHPET 20090910 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9f490 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000003dfff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fa64] TEXT DATA BSS ==> [0001000000 - 0001a2fa64] [ 0.000000] #3 [003721b000 - 0037fef5ce] RAMDISK ==> [003721b000 - 0037fef5ce] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a3028c] BRK ==> [0001a30000 - 0001a3028c] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048351 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000 [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ff00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u262144 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031225 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=662790d6-b22c-44c5-aae8-524524d378e4 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4042912k/4980736k available (5421k kernel code, 787332k absent, 150492k reserved, 2980k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:456 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3211.429 MHz processor. [ 0.020006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6422.85 BogoMIPS (lpj=32114250) [ 0.020021] Security Framework initialized [ 0.020037] AppArmor: AppArmor initialized [ 0.020257] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021522] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.022101] Mount-cache hash table entries: 256 [ 0.022195] Initializing cgroup subsys ns [ 0.022198] Initializing cgroup subsys cpuacct [ 0.022200] Initializing cgroup subsys memory [ 0.022206] Initializing cgroup subsys devices [ 0.022207] Initializing cgroup subsys freezer [ 0.022209] Initializing cgroup subsys net_cls [ 0.022223] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.022224] CPU: L2 Cache: 512K (64 bytes/line) [ 0.022226] CPU 0/0x0 -> Node 0 [ 0.022228] tseg: 0000000000 [ 0.022238] CPU: Physical Processor ID: 0 [ 0.022239] CPU: Processor Core ID: 0 [ 0.022241] mce: CPU supports 6 MCE banks [ 0.022249] using C1E aware idle routine [ 0.022250] Performance Events: AMD PMU driver. [ 0.022253] ... version: 0 [ 0.022254] ... bit width: 48 [ 0.022256] ... generic registers: 4 [ 0.022257] ... value mask: 0000ffffffffffff [ 0.022258] ... max period: 00007fffffffffff [ 0.022259] ... fixed-purpose events: 0 [ 0.022260] ... event mask: 000000000000000f [ 0.023397] ACPI: Core revision 20090903 [ 0.040005] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040009] ftrace: allocating 22543 entries in 89 pages [ 0.050062] Setting APIC routing to flat [ 0.050359] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.151380] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.310090] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.310095] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.320016] System has AMD C1E enabled [ 0.320024] Switch to broadcast mode on CPU1 [ 0.320052] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.030000] Initializing CPU#2 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 2/0x2 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 2 [ 0.480107] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.480111] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.490017] Switch to broadcast mode on CPU2 [ 0.490053] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.030000] Initializing CPU#3 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 3/0x3 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 3 [ 0.650023] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.650028] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.660018] Brought up 4 CPUs [ 0.660020] Total of 4 processors activated (25687.92 BogoMIPS). [ 0.660017] Switch to broadcast mode on CPU3 [ 0.661717] CPU0 attaching sched-domain: [ 0.661719] domain 0: span 0-3 level MC [ 0.661721] groups: 0 1 2 3 [ 0.661725] CPU1 attaching sched-domain: [ 0.661726] domain 0: span 0-3 level MC [ 0.661727] groups: 1 2 3 0 [ 0.661730] CPU2 attaching sched-domain: [ 0.661731] domain 0: span 0-3 level MC [ 0.661733] groups: 2 3 0 1 [ 0.661735] CPU3 attaching sched-domain: [ 0.661736] domain 0: span 0-3 level MC [ 0.661738] groups: 3 0 1 2 [ 0.661798] Switch to broadcast mode on CPU0 [ 0.661798] devtmpfs: initialized [ 0.661798] regulator: core version 0.5 [ 0.661798] Time: 21:55:31 Date: 03/21/11 [ 0.661798] NET: Registered protocol family 16 [ 0.661798] node 0 link 0: io port [1000, ffffff] [ 0.661798] TOM: 00000000d0000000 aka 3328M [ 0.661798] Fam 10h mmconf [e0000000, efffffff] [ 0.661798] node 0 link 0: mmio [a0000, bffff] [ 0.661798] node 0 link 0: mmio [d0000000, dfffffff] [ 0.661798] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.661798] node 0 link 0: mmio [f0000000, ffefffff] [ 0.661798] TOM2: 0000000130000000 aka 4864M [ 0.661798] bus: [00,07] on node 0 link 0 [ 0.661798] Trying to unpack rootfs image as initramfs... [ 0.661798] bus: 00 index 0 io port: [0, ffff] [ 0.661798] bus: 00 index 1 mmio: [a0000, bffff] [ 0.661798] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.661798] bus: 00 index 3 mmio: [f0000000, ffffffff] [ 0.661798] bus: 00 index 4 mmio: [130000000, fcffffffff] [ 0.661798] ACPI: bus type pci registered [ 0.661798] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.661798] PCI: Not using MMCONFIG. [ 0.661798] PCI: Using configuration type 1 for base access [ 0.661798] PCI: Using configuration type 1 for extended access [ 0.661798] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.661798] mtrr: probably your BIOS does not setup all CPUs. [ 0.661798] mtrr: corrected configuration. [ 0.661798] bio: create slab at 0 [ 0.661798] ACPI: EC: Look up EC in DSDT [ 0.662261] ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND [ 0.662265] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81a0e040), AE_NOT_FOUND [ 0.662335] ACPI Error (dswload-0781): [PRID] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.662339] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230) [ 0.662341] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81a0e040), AE_ALREADY_EXISTS [ 0.662345] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error [ 0.662396] ACPI: Executed 3 blocks of module-level executable AML code [ 0.862262] ACPI: Interpreter enabled [ 0.862266] ACPI: (supports S0 S1 S3 S4 S5) [ 0.862285] ACPI: Using IOAPIC for interrupt routing [ 0.862335] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.865915] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.858508] Freeing initrd memory: 14161k freed [ 0.871118] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.876958] ACPI Warning: Incorrect checksum in table [OEMB] - 30, should be 27 (20090903/tbutils-314) [ 0.877035] ACPI: No dock devices found. [ 0.877157] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.877235] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.877237] pci 0000:00:02.0: PME# disabled [ 0.877267] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.877268] pci 0000:00:05.0: PME# disabled [ 0.877295] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.877297] pci 0000:00:06.0: PME# disabled [ 0.877324] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.877326] pci 0000:00:07.0: PME# disabled [ 0.877366] pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007] [ 0.877372] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003] [ 0.877378] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007] [ 0.877384] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003] [ 0.877389] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f] [ 0.877395] pci 0000:00:11.0: reg 24 32bit mmio: [0xf7fffc00-0xf7ffffff] [ 0.877411] pci 0000:00:11.0: set SATA to AHCI mode [ 0.877445] pci 0000:00:12.0: reg 10 32bit mmio: [0xf7ffd000-0xf7ffdfff] [ 0.877493] pci 0000:00:12.1: reg 10 32bit mmio: [0xf7ffe000-0xf7ffefff] [ 0.877559] pci 0000:00:12.2: reg 10 32bit mmio: [0xf7fff800-0xf7fff8ff] [ 0.877605] pci 0000:00:12.2: supports D1 D2 [ 0.877606] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.877610] pci 0000:00:12.2: PME# disabled [ 0.877638] pci 0000:00:13.0: reg 10 32bit mmio: [0xf7ffb000-0xf7ffbfff] [ 0.877689] pci 0000:00:13.1: reg 10 32bit mmio: [0xf7ffc000-0xf7ffcfff] [ 0.877753] pci 0000:00:13.2: reg 10 32bit mmio: [0xf7fff400-0xf7fff4ff] [ 0.877799] pci 0000:00:13.2: supports D1 D2 [ 0.877800] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.877803] pci 0000:00:13.2: PME# disabled [ 0.877907] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.877913] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.877918] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.877924] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.877929] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.877988] pci 0000:00:14.2: reg 10 64bit mmio: [0xf7ff4000-0xf7ff7fff] [ 0.878026] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.878029] pci 0000:00:14.2: PME# disabled [ 0.878124] pci 0000:00:14.5: reg 10 32bit mmio: [0xf7ffa000-0xf7ffafff] [ 0.878240] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.878247] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.878254] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.878258] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 0.878262] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbb80000-0xfbbfffff] [ 0.878323] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] [ 0.878325] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbbfffff] [ 0.878328] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.878378] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbc00000-0xfbdfffff] [ 0.878460] pci 0000:02:00.0: supports D1 D2 [ 0.878461] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.878466] pci 0000:02:00.0: PME# disabled [ 0.878525] pci 0000:00:05.0: bridge 32bit mmio: [0xfbc00000-0xfbdfffff] [ 0.878566] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbec0000-0xfbefffff] [ 0.878573] pci 0000:03:00.0: reg 18 io port: [0xdc00-0xdc7f] [ 0.878619] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.878623] pci 0000:03:00.0: PME# disabled [ 0.878673] pci 0000:00:06.0: bridge io port: [0xd000-0xdfff] [ 0.878675] pci 0000:00:06.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.878737] pci 0000:04:00.0: reg 10 64bit mmio: [0xfbfff800-0xfbffffff] [ 0.878746] pci 0000:04:00.0: reg 18 io port: [0xe800-0xe8ff] [ 0.878818] pci 0000:04:00.0: supports D2 [ 0.878820] pci 0000:04:00.0: PME# supported from D2 D3hot D3cold [ 0.878825] pci 0000:04:00.0: PME# disabled [ 0.878883] pci 0000:00:07.0: bridge io port: [0xe000-0xefff] [ 0.878885] pci 0000:00:07.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.878938] pci 0000:00:14.4: transparent bridge [ 0.878958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.879116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.879164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] [ 0.879205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.879246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.879306] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.882836] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) [ 0.882925] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.883012] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.883098] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 12 14 15) [ 0.883184] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.883270] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.883356] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.883442] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.883520] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.883523] vgaarb: loaded [ 0.883594] SCSI subsystem initialized [ 0.883614] libata version 3.00 loaded. [ 0.883614] usbcore: registered new interface driver usbfs [ 0.883614] usbcore: registered new interface driver hub [ 0.883614] usbcore: registered new device driver usb [ 0.883614] ACPI: WMI: Mapper loaded [ 0.883614] PCI: Using ACPI for IRQ routing [ 0.883614] NetLabel: Initializing [ 0.883614] NetLabel: domain hash size = 128 [ 0.883614] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.883614] NetLabel: unlabeled traffic allowed by default [ 0.883614] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.883614] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.883614] Switching to clocksource tsc [ 0.883614] AppArmor: AppArmor Filesystem Enabled [ 0.883614] pnp: PnP ACPI init [ 0.883614] ACPI: bus type pnp registered [ 0.884139] pnp: PnP ACPI: found 14 devices [ 0.884140] ACPI: ACPI bus type pnp unregistered [ 0.884148] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.884150] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.884154] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.884156] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.884157] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.884159] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.884161] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.884162] system 00:08: ioport range 0xc50-0xc51 has been reserved [ 0.884164] system 00:08: ioport range 0xc52-0xc52 has been reserved [ 0.884165] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.884167] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.884169] system 00:08: ioport range 0xcd0-0xcd1 has been reserved [ 0.884170] system 00:08: ioport range 0xcd2-0xcd3 has been reserved [ 0.884172] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 0.884173] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.884175] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 0.884177] system 00:08: ioport range 0xb00-0xb3f has been reserved [ 0.884178] system 00:08: ioport range 0x800-0x89f has been reserved [ 0.884180] system 00:08: ioport range 0xb00-0xb0f has been reserved [ 0.884182] system 00:08: ioport range 0xb20-0xb3f has been reserved [ 0.884183] system 00:08: ioport range 0x900-0x90f has been reserved [ 0.884185] system 00:08: ioport range 0x910-0x91f has been reserved [ 0.884187] system 00:08: ioport range 0xfe00-0xfefe has been reserved [ 0.884189] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.884191] system 00:08: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.884194] system 00:0b: ioport range 0x230-0x23f has been reserved [ 0.884196] system 00:0b: ioport range 0x290-0x29f has been reserved [ 0.884197] system 00:0b: ioport range 0xf40-0xf4f has been reserved [ 0.884199] system 00:0b: ioport range 0xa30-0xa3f has been reserved [ 0.884202] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.884205] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.884207] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.884208] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.884210] system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved [ 0.884212] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.888840] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.888842] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.888845] pci 0000:00:02.0: MEM window: 0xf8000000-0xfbbfffff [ 0.888847] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.888850] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 0.888851] pci 0000:00:05.0: IO window: disabled [ 0.888853] pci 0000:00:05.0: MEM window: 0xfbc00000-0xfbdfffff [ 0.888855] pci 0000:00:05.0: PREFETCH window: disabled [ 0.888858] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03 [ 0.888859] pci 0000:00:06.0: IO window: 0xd000-0xdfff [ 0.888862] pci 0000:00:06.0: MEM window: 0xfbe00000-0xfbefffff [ 0.888863] pci 0000:00:06.0: PREFETCH window: disabled [ 0.888866] pci 0000:00:07.0: PCI bridge, secondary bus 0000:04 [ 0.888868] pci 0000:00:07.0: IO window: 0xe000-0xefff [ 0.888870] pci 0000:00:07.0: MEM window: 0xfbf00000-0xfbffffff [ 0.888871] pci 0000:00:07.0: PREFETCH window: disabled [ 0.888874] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 [ 0.888875] pci 0000:00:14.4: IO window: disabled [ 0.888879] pci 0000:00:14.4: MEM window: disabled [ 0.888882] pci 0000:00:14.4: PREFETCH window: disabled [ 0.888892] alloc irq_desc for 18 on node 0 [ 0.888893] alloc kstat_irqs on node 0 [ 0.888897] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.888900] pci 0000:00:02.0: setting latency timer to 64 [ 0.888903] alloc irq_desc for 17 on node 0 [ 0.888904] alloc kstat_irqs on node 0 [ 0.888906] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.888908] pci 0000:00:05.0: setting latency timer to 64 [ 0.888912] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.888914] pci 0000:00:06.0: setting latency timer to 64 [ 0.888917] alloc irq_desc for 19 on node 0 [ 0.888918] alloc kstat_irqs on node 0 [ 0.888920] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.888922] pci 0000:00:07.0: setting latency timer to 64 [ 0.888928] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.888930] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.888932] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.888934] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbbfffff] [ 0.888935] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.888937] pci_bus 0000:02: resource 1 mem: [0xfbc00000-0xfbdfffff] [ 0.888939] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.888940] pci_bus 0000:03: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.888942] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] [ 0.888943] pci_bus 0000:04: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.888945] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.888946] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.888968] NET: Registered protocol family 2 [ 0.889074] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.889878] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.892256] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.892555] TCP: Hash tables configured (established 524288 bind 65536) [ 0.892556] TCP reno registered [ 0.892637] NET: Registered protocol family 1 [ 1.034071] pci 0000:01:00.0: Boot video device [ 1.034834] PCI-DMA: Disabling AGP. [ 1.034916] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 1.034917] PCI-DMA: using GART IOMMU. [ 1.034920] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.036735] Scanning for low memory corruption every 60 seconds [ 1.036820] audit: initializing netlink socket (disabled) [ 1.036832] type=2000 audit(1300744531.034:1): initialized [ 1.042328] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.043185] VFS: Disk quotas dquot_6.5.2 [ 1.043216] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.043568] fuse init (API version 7.13) [ 1.043614] msgmni has been set to 7923 [ 1.043803] alg: No test for stdrng (krng) [ 1.043835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.043837] io scheduler noop registered [ 1.043839] io scheduler anticipatory registered [ 1.043840] io scheduler deadline registered [ 1.043860] io scheduler cfq registered (default) [ 1.043959] alloc irq_desc for 25 on node 0 [ 1.043960] alloc kstat_irqs on node 0 [ 1.043966] pcieport 0000:00:02.0: irq 25 for MSI/MSI-X [ 1.043970] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.044063] alloc irq_desc for 26 on node 0 [ 1.044064] alloc kstat_irqs on node 0 [ 1.044067] pcieport 0000:00:05.0: irq 26 for MSI/MSI-X [ 1.044071] pcieport 0000:00:05.0: setting latency timer to 64 [ 1.044143] alloc irq_desc for 27 on node 0 [ 1.044144] alloc kstat_irqs on node 0 [ 1.044147] pcieport 0000:00:06.0: irq 27 for MSI/MSI-X [ 1.044151] pcieport 0000:00:06.0: setting latency timer to 64 [ 1.044225] alloc irq_desc for 28 on node 0 [ 1.044226] alloc kstat_irqs on node 0 [ 1.044229] pcieport 0000:00:07.0: irq 28 for MSI/MSI-X [ 1.044232] pcieport 0000:00:07.0: setting latency timer to 64 [ 1.044284] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.044298] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.044360] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.044366] ACPI: Power Button [PWRB] [ 1.044393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.044395] ACPI: Power Button [PWRF] [ 1.044670] processor LNXCPU:00: registered as cooling_device0 [ 1.044706] processor LNXCPU:01: registered as cooling_device1 [ 1.044725] processor LNXCPU:02: registered as cooling_device2 [ 1.044744] processor LNXCPU:03: registered as cooling_device3 [ 1.047142] Linux agpgart interface v0.103 [ 1.047163] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.047258] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.047480] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.048029] brd: module loaded [ 1.048270] loop: module loaded [ 1.048313] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.048439] alloc irq_desc for 16 on node 0 [ 1.048440] alloc kstat_irqs on node 0 [ 1.048444] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.048463] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 1.048686] Fixed MDIO Bus: probed [ 1.048706] PPP generic driver version 2.4.2 [ 1.048738] tun: Universal TUN/TAP device driver, 1.6 [ 1.048740] tun: (C) 1999-2004 Max Krasnyansky [ 1.048794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.048826] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.048841] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.048865] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.048885] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.048896] ehci_hcd 0000:00:12.2: debug port 1 [ 1.048913] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7fff800 [ 1.060696] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.060750] usb usb1: configuration #1 chosen from 1 choice [ 1.060767] hub 1-0:1.0: USB hub found [ 1.060772] hub 1-0:1.0: 6 ports detected [ 1.060839] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.060847] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.060869] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.060883] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.060895] ehci_hcd 0000:00:13.2: debug port 1 [ 1.060908] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf7fff400 [ 1.080296] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.080335] usb usb2: configuration #1 chosen from 1 choice [ 1.080349] hub 2-0:1.0: USB hub found [ 1.080353] hub 2-0:1.0: 6 ports detected [ 1.080394] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.080422] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.080432] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.080451] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.080469] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf7ffd000 [ 1.144339] usb usb3: configuration #1 chosen from 1 choice [ 1.144354] hub 3-0:1.0: USB hub found [ 1.144360] hub 3-0:1.0: 3 ports detected [ 1.144464] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.144471] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.144489] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.144500] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf7ffe000 [ 1.204336] usb usb4: configuration #1 chosen from 1 choice [ 1.204350] hub 4-0:1.0: USB hub found [ 1.204355] hub 4-0:1.0: 3 ports detected [ 1.204459] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.204467] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.204486] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.204501] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7ffb000 [ 1.264342] usb usb5: configuration #1 chosen from 1 choice [ 1.264355] hub 5-0:1.0: USB hub found [ 1.264361] hub 5-0:1.0: 3 ports detected [ 1.264466] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.264473] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.264491] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.264501] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf7ffc000 [ 1.324340] usb usb6: configuration #1 chosen from 1 choice [ 1.324353] hub 6-0:1.0: USB hub found [ 1.324359] hub 6-0:1.0: 3 ports detected [ 1.324463] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.324471] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.324490] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.324500] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7ffa000 [ 1.384343] usb usb7: configuration #1 chosen from 1 choice [ 1.384356] hub 7-0:1.0: USB hub found [ 1.384362] hub 7-0:1.0: 2 ports detected [ 1.384420] uhci_hcd: USB Universal Host Controller Interface driver [ 1.384463] PNP: No PS/2 controller found. Probing ports directly. [ 1.385211] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.385219] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.385290] mice: PS/2 mouse device common for all mice [ 1.385356] rtc_cmos 00:03: RTC can wake from S4 [ 1.385379] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.385400] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.385472] device-mapper: uevent: version 1.0.3 [ 1.385547] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.385644] device-mapper: multipath: version 1.1.0 loaded [ 1.385645] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.385822] cpuidle: using governor ladder [ 1.385824] cpuidle: using governor menu [ 1.386030] TCP cubic registered [ 1.386111] NET: Registered protocol family 10 [ 1.386386] lo: Disabled Privacy Extensions [ 1.386552] NET: Registered protocol family 17 [ 1.386594] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00) [ 1.386622] powernow-k8: 0 : pstate 0 (3200 MHz) [ 1.386623] powernow-k8: 1 : pstate 1 (2500 MHz) [ 1.386624] powernow-k8: 2 : pstate 2 (2100 MHz) [ 1.386625] powernow-k8: 3 : pstate 3 (800 MHz) [ 1.386872] PM: Resume from disk failed. [ 1.386879] registered taskstats version 1 [ 1.387173] Magic number: 3:678:955 [ 1.387232] rtc_cmos 00:03: setting system clock to 2011-03-21 21:55:32 UTC (1300744532) [ 1.387234] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.387235] EDD information not available. [ 1.387264] Freeing unused kernel memory: 876k freed [ 1.387423] Write protecting the kernel read-only data: 7696k [ 1.398067] udev: starting version 151 [ 1.406661] vga16fb: initializing [ 1.406665] vga16fb: mapped to 0xffff8800000a0000 [ 1.406708] fb0: VGA16 VGA frame buffer device [ 1.417154] ahci 0000:00:11.0: version 3.0 [ 1.417166] alloc irq_desc for 22 on node 0 [ 1.417168] alloc kstat_irqs on node 0 [ 1.417175] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.417285] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.417288] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs [ 1.419948] scsi0 : ahci [ 1.421510] ATL1E 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.421520] ATL1E 0000:03:00.0: setting latency timer to 64 [ 1.425521] scsi1 : ahci [ 1.429312] ohci1394 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.429321] ohci1394 0000:04:00.0: setting latency timer to 64 [ 1.432605] Floppy drive(s): fd0 is 1.44M [ 1.434620] scsi2 : ahci [ 1.435391] scsi3 : ahci [ 1.435433] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 [ 1.435436] ata2: SATA max UDMA/133 abar m1024@0xf7fffc00 port 0xf7fffd80 irq 22 [ 1.435439] ata3: SATA max UDMA/133 abar m1024@0xf7fffc00 port 0xf7fffe00 irq 22 [ 1.435442] ata4: SATA max UDMA/133 abar m1024@0xf7fffc00 port 0xf7fffe80 irq 22 [ 1.437388] scsi4 : pata_atiixp [ 1.437440] scsi5 : pata_atiixp [ 1.438389] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.438391] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.481068] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fbfff800-fbffffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.501693] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.564508] FDC 0 is a post-1991 82077 [ 1.622298] Console: switching to colour frame buffer device 80x30 [ 1.772302] usb 1-2: configuration #1 chosen from 1 choice [ 1.781156] ata4: SATA link down (SStatus 0 SControl 300) [ 1.781183] ata3: SATA link down (SStatus 0 SControl 300) [ 1.781207] ata2: SATA link down (SStatus 0 SControl 300) [ 2.340299] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 2.360020] ata1: softreset failed (device not ready) [ 2.360023] ata1: applying SB600 PMP SRST workaround and retrying [ 2.540324] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.540369] usb 4-1: configuration #1 chosen from 1 choice [ 2.541964] ata1.00: ATA-8: Hitachi HDT721010SLA360, ST6OA3AA, max UDMA/133 [ 2.541967] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.544140] ata1.00: configured for UDMA/133 [ 2.562948] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5 [ 2.563051] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.563086] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.563110] sd 0:0:0:0: [sda] Write Protect is off [ 2.563111] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.563123] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.563196] sda: sda1 sda2 sda3 sda4 [ 2.582981] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.740630] ata6.00: ATAPI: HP DVD Writer 1270d, GH22, max UDMA/100 [ 2.780626] ata6.00: configured for UDMA/100 [ 2.782816] scsi 5:0:0:0: CD-ROM HP DVD Writer 1270d GH22 PQ: 0 ANSI: 5 [ 2.790309] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.790311] Uniform CD-ROM driver Revision: 3.20 [ 2.790362] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 2.790392] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 2.802739] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001d5420d] [ 2.850302] usb 4-2: new low speed USB device using ohci_hcd and address 3 [ 3.066375] usb 4-2: configuration #1 chosen from 1 choice [ 3.074197] usbcore: registered new interface driver hiddev [ 3.088481] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3 [ 3.088530] generic-usb 0003:06A3:8020.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:12.1-2/input0 [ 3.121180] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input4 [ 3.121256] generic-usb 0003:06A3:8020.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:12.1-2/input1 [ 3.121271] usbcore: registered new interface driver usbhid [ 3.121273] usbhid: v2.6:USB HID core driver [ 3.361293] EXT3-fs: INFO: recovery required on readonly filesystem. [ 3.361296] EXT3-fs: write access will be enabled during recovery. [ 3.390024] usb 4-3: new low speed USB device using ohci_hcd and address 4 [ 3.597312] usb 4-3: configuration #1 chosen from 1 choice [ 3.605387] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input5 [ 3.605449] generic-usb 0003:046D:C051.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.1-3/input0 [ 3.920812] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 4.123109] usb 3-1: configuration #1 chosen from 1 choice [ 8.870055] kjournald starting. Commit interval 5 seconds [ 8.870071] EXT3-fs: sda2: orphan cleanup on readonly fs [ 8.899432] ext3_orphan_cleanup: deleting unreferenced inode 394710 [ 8.907656] ext3_orphan_cleanup: deleting unreferenced inode 394662 [ 8.915085] ext3_orphan_cleanup: deleting unreferenced inode 394630 [ 8.915514] ext3_orphan_cleanup: deleting unreferenced inode 394208 [ 8.924547] EXT3-fs: sda2: 4 orphan inodes deleted [ 8.924548] EXT3-fs: recovery complete. [ 8.936321] EXT3-fs: mounted filesystem with ordered data mode. [ 11.931627] Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 across:1052248k [ 13.004590] udev: starting version 151 [ 13.004827] EXT3 FS on sda2, internal journal [ 15.224469] Bluetooth: Core ver 2.15 [ 15.224553] NET: Registered protocol family 31 [ 15.224555] Bluetooth: HCI device and connection manager initialized [ 15.224558] Bluetooth: HCI socket layer initialized [ 15.226834] lirc_dev: IR Remote Control driver registered, major 61 [ 15.227185] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0x000b00-0x000b0f] [ 15.227187] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.260748] lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90 [ 15.260750] lirc_mceusb: Daniel Melander , Martin Blatter , Dan Conti [ 15.430952] usb 4-1: reset full speed USB device using ohci_hcd and address 2 [ 15.565736] nvidia: module license 'NVIDIA' taints kernel. [ 15.565739] Disabling lock debugging due to kernel taint [ 15.627151] lirc_dev: lirc_register_driver: sample_rate: 0 [ 15.631145] lirc_mceusb[2]: BB+ Dongle(e.d) on usb4:2 [ 15.631193] usbcore: registered new interface driver lirc_mceusb [ 15.836819] EDAC MC: Ver: 2.1.0 Nov 24 2010 [ 15.838055] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 15.838132] usbcore: registered new interface driver btusb [ 15.953698] EDAC amd64_edac: Ver: 3.2.0 Nov 24 2010 [ 15.953804] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 15.953810] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 15.953811] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 15.953812] (Note that use of the override may cause unknown side effects.) [ 15.953824] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 16.083913] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 16.083920] nvidia 0000:01:00.0: setting latency timer to 64 [ 16.083923] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 16.084084] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010 [ 17.351589] Linux video capture interface: v2.00 [ 17.463299] type=1505 audit(1300758948.573:2): operation="profile_load" pid=667 name="/sbin/dhclient3" [ 17.463309] type=1505 audit(1300758948.573:3): operation="profile_replace" pid=773 name="/sbin/dhclient3" [ 17.463483] type=1505 audit(1300758948.573:4): operation="profile_load" pid=667 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.463501] type=1505 audit(1300758948.573:5): operation="profile_replace" pid=773 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.463587] type=1505 audit(1300758948.573:6): operation="profile_load" pid=667 name="/usr/lib/connman/scripts/dhclient-script" [ 17.463611] type=1505 audit(1300758948.573:7): operation="profile_replace" pid=773 name="/usr/lib/connman/scripts/dhclient-script" [ 17.745468] uvcvideo: Found UVC 1.00 device (046d:09a1) [ 17.764041] input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input6 [ 17.764091] usbcore: registered new interface driver uvcvideo [ 17.764093] USB Video Class driver (v0.1.0) [ 17.765718] lp: driver loaded but no devices found [ 17.772074] type=1505 audit(1300758948.883:8): operation="profile_load" pid=830 name="/usr/sbin/ntpd" [ 17.772156] type=1505 audit(1300758948.883:9): operation="profile_replace" pid=829 name="/usr/sbin/ntpd" [ 18.466569] cx23885 driver version 0.0.2 loaded [ 18.466660] cx23885 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 18.466740] CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 [card=2,autodetected] [ 18.854625] tveeprom 0-0050: Hauppauge model 78521, rev C1E9, serial# 3116854 [ 18.854627] tveeprom 0-0050: MAC address is 00-0D-FE-2F-8F-36 [ 18.854629] tveeprom 0-0050: tuner model is Philips 18271_8295 (idx 149, type 54) [ 18.854631] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) [ 18.854633] tveeprom 0-0050: audio processor is CX23887 (idx 42) [ 18.854634] tveeprom 0-0050: decoder processor is CX23887 (idx 37) [ 18.854636] tveeprom 0-0050: has radio [ 18.854637] cx23885[0]: hauppauge eeprom: model=78521 [ 18.888962] cx25840 2-0044: cx25 0-21 found @ 0x88 (cx23885[0]) [ 18.893230] cx25840 2-0044: firmware: requesting v4l-cx23885-avcore-01.fw [ 19.553734] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.636069] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 19.931174] usbcore: registered new interface driver snd-usb-audio [ 19.980573] tuner 1-0042: chip found @ 0x84 (cx23885[0]) [ 20.031199] tda829x 1-0042: could not clearly identify tuner address, defaulting to 60 [ 20.073516] tda18271 1-0060: creating new instance [ 20.120643] TDA18271HD/C1 detected @ 1-0060 [ 20.985886] Registering the dns_resolver key type [ 20.985894] Slow work thread pool: Starting up [ 20.986274] Slow work thread pool: Ready [ 20.986362] CIFS: Unknown mount option unicode [ 21.005042] type=1505 audit(1300758952.115:10): operation="profile_replace" pid=1018 name="/sbin/dhclient3" [ 21.005233] type=1505 audit(1300758952.115:11): operation="profile_replace" pid=1018 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 21.500932] CIFS VFS: Error connecting to socket. Aborting operation [ 21.500936] CIFS VFS: cifs_mount failed w/return code = -101 [ 21.751041] tda829x 1-0042: type set to tda8295+18271 [ 23.450699] cx23885[0]/0: registered device video1 [v4l2] [ 24.264971] alloc irq_desc for 29 on node 0 [ 24.264973] alloc kstat_irqs on node 0 [ 24.264984] ATL1E 0000:03:00.0: irq 29 for MSI/MSI-X [ 24.265118] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 24.516308] CIFS: Unknown mount option unicode [ 24.516324] CIFS VFS: Error connecting to socket. Aborting operation [ 24.516327] CIFS VFS: cifs_mount failed w/return code = -101 [ 25.105413] cx23885[0]: registered device video2 [mpeg] [ 25.105416] cx23885_dvb_register() allocating 1 frontend(s) [ 25.105418] cx23885[0]: cx23885 based dvb card [ 25.241558] MT2131: successfully identified at address 0x61 [ 25.243204] DVB: registering new adapter (cx23885[0]) [ 25.243206] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... [ 25.243410] cx23885_dev_checkrevision() Hardware revision = 0xb1 [ 25.243416] cx23885[0]/0: found at 0000:02:00.0, rev: 15, irq: 17, latency: 0, mmio: 0xfbc00000 [ 25.243422] cx23885 0000:02:00.0: setting latency timer to 64 [ 25.243427] IRQ 17/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 25.381655] __ratelimit: 36 callbacks suppressed [ 25.381658] type=1505 audit(1300758956.493:24): operation="profile_replace" pid=1187 name="/usr/sbin/mysqld"