[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) [ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7fed0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved) [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fed0000 (usable) [ 0.000000] modified: 000000007fed0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] modified: 000000007fee3000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00f7bc0] f7bc0 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 [ 0.000000] RAMDISK: 375ab000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 009a5000 - 013e993c [ 0.000000] Move RAMDISK from 00000000375ab000 - 0000000037fef93b to 009a5000 - 013e993b [ 0.000000] ACPI: RSDP 000f7b40 00024 (v02 Compal) [ 0.000000] ACPI: XSDT 7fed8664 0008C (v01 Compal CRESTLNE 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7fedfbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 7fed9b51 0600D (v02 Compal CRESTLNE 06040000 INTL 20061109) [ 0.000000] ACPI: FACS 7fee2fc0 00040 [ 0.000000] ACPI: APIC 7fedfcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 7fedfd2e 00038 (v01 Compal CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 7fedfd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA 7fedfda2 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TMOR 7fedfdd4 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: SLIC 7fedfdfa 00176 (v01 Compal CRESTLNE 06040000 TBD 00000001) [ 0.000000] ACPI: APIC 7fedff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7fedffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 7fed988c 002C5 (v01 SataRe SataAhci 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 7fed8c7c 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7fed8bd6 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7fed86f0 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1158MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fed0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x00000002 [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fed0 [ 0.000000] On node 0 totalpages: 523872 [ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c13eb020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2318 pages used for memmap [ 0.000000] HighMem zone: 294340 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36416 r0 d20928 u2097152 [ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519778 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=f7620e66-8613-4617-98cf-ac233253bcc0 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10479660 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (52 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS [ 0.000000] #3 [00009a1000 - 00009a4194] BRK [ 0.000000] #4 [00000f7bd0 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f7bc0 - 00000f7bd0] MP-table mpf [ 0.000000] #6 [000009f800 - 000009fd71] BIOS reserved [ 0.000000] #7 [000009ff2d - 00000f7bc0] BIOS reserved [ 0.000000] #8 [000009fd71 - 000009ff2d] MP-table mpc [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE [ 0.000000] #12 [00009a5000 - 00013ea000] NEW RAMDISK [ 0.000000] #13 [00013ea000 - 00013eb000] BOOTMEM [ 0.000000] #14 [00013eb000 - 00023eb000] BOOTMEM [ 0.000000] #15 [00023eb000 - 00023eb004] BOOTMEM [ 0.000000] #16 [00023eb040 - 00023eb100] BOOTMEM [ 0.000000] #17 [00023eb100 - 00023eb154] BOOTMEM [ 0.000000] #18 [00023eb180 - 00023ee180] BOOTMEM [ 0.000000] #19 [00023ee180 - 00023ee1f0] BOOTMEM [ 0.000000] #20 [00023ee200 - 00023f4200] BOOTMEM [ 0.000000] #21 [00023f4200 - 00023f4225] BOOTMEM [ 0.000000] #22 [00023f4240 - 00023f4267] BOOTMEM [ 0.000000] #23 [00023f4280 - 00023f4424] BOOTMEM [ 0.000000] #24 [00023f4440 - 00023f4480] BOOTMEM [ 0.000000] #25 [00023f4480 - 00023f44c0] BOOTMEM [ 0.000000] #26 [00023f44c0 - 00023f4500] BOOTMEM [ 0.000000] #27 [00023f4500 - 00023f4540] BOOTMEM [ 0.000000] #28 [00023f4540 - 00023f4580] BOOTMEM [ 0.000000] #29 [00023f4580 - 00023f45c0] BOOTMEM [ 0.000000] #30 [00023f45c0 - 00023f4600] BOOTMEM [ 0.000000] #31 [00023f4600 - 00023f4640] BOOTMEM [ 0.000000] #32 [00023f4640 - 00023f4680] BOOTMEM [ 0.000000] #33 [00023f4680 - 00023f46c0] BOOTMEM [ 0.000000] #34 [00023f46c0 - 00023f4700] BOOTMEM [ 0.000000] #35 [00023f4700 - 00023f4740] BOOTMEM [ 0.000000] #36 [00023f4740 - 00023f4750] BOOTMEM [ 0.000000] #37 [00023f4780 - 00023f4790] BOOTMEM [ 0.000000] #38 [00023f47c0 - 00023f482a] BOOTMEM [ 0.000000] #39 [00023f4840 - 00023f48aa] BOOTMEM [ 0.000000] #40 [0002400000 - 000240e000] BOOTMEM [ 0.000000] #41 [0002600000 - 000260e000] BOOTMEM [ 0.000000] #42 [00023f68c0 - 00023f68c4] BOOTMEM [ 0.000000] #43 [00023f6900 - 00023f6904] BOOTMEM [ 0.000000] #44 [00023f6940 - 00023f6948] BOOTMEM [ 0.000000] #45 [00023f6980 - 00023f6988] BOOTMEM [ 0.000000] #46 [00023f69c0 - 00023f6a68] BOOTMEM [ 0.000000] #47 [00023f6a80 - 00023f6ae8] BOOTMEM [ 0.000000] #48 [00023f6b00 - 00023fab00] BOOTMEM [ 0.000000] #49 [000240e000 - 000248e000] BOOTMEM [ 0.000000] #50 [000248e000 - 00024ce000] BOOTMEM [ 0.000000] #51 [000260e000 - 000300c82c] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fed0) [ 0.000000] Memory: 2048528k/2095936k available (4928k kernel code, 46960k reserved, 2336k data, 684k init, 1186632k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB) [ 0.000000] .data : 0xc05d029e - 0xc0818668 (2336 kB) [ 0.000000] .text : 0xc0100000 - 0xc05d029e (4928 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: PIT calibration matches HPET. 1 loops [ 0.000000] Detected 1994.986 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.97 BogoMIPS (lpj=7979944) [ 0.008010] pid_max: default: 32768 minimum: 301 [ 0.008028] Security Framework initialized [ 0.008045] AppArmor: AppArmor initialized [ 0.008047] Yama: becoming mindful. [ 0.008099] Mount-cache hash table entries: 512 [ 0.008230] Initializing cgroup subsys ns [ 0.008235] Initializing cgroup subsys cpuacct [ 0.008240] Initializing cgroup subsys memory [ 0.008248] Initializing cgroup subsys devices [ 0.008250] Initializing cgroup subsys freezer [ 0.008252] Initializing cgroup subsys net_cls [ 0.008280] CPU: Physical Processor ID: 0 [ 0.008282] CPU: Processor Core ID: 0 [ 0.008284] mce: CPU supports 6 MCE banks [ 0.008292] CPU0: Thermal monitoring handled by SMI [ 0.008296] using mwait in idle threads. [ 0.008303] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.008309] PEBS disabled due to CPU errata. [ 0.008316] ... version: 2 [ 0.008318] ... bit width: 40 [ 0.008319] ... generic registers: 2 [ 0.008321] ... value mask: 000000ffffffffff [ 0.008323] ... max period: 000000007fffffff [ 0.008325] ... fixed-purpose events: 3 [ 0.008326] ... event mask: 0000000700000003 [ 0.013959] ACPI: Core revision 20100428 [ 0.024010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.024015] ftrace: allocating 21758 entries in 43 pages [ 0.028047] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.069367] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 0.072000] Booting Node 0, Processors #1 Ok. [ 0.012000] Initializing CPU#1 [ 0.012000] CPU1: Thermal monitoring handled by SMI [ 0.160015] Brought up 2 CPUs [ 0.160019] Total of 2 processors activated (7979.94 BogoMIPS). [ 0.160732] devtmpfs: initialized [ 0.161031] regulator: core version 0.5 [ 0.161062] Time: 12:14:37 Date: 10/14/10 [ 0.161104] NET: Registered protocol family 16 [ 0.161128] Trying to unpack rootfs image as initramfs... [ 0.161238] EISA bus registered [ 0.161247] ACPI: bus type pci registered [ 0.161328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.161332] PCI: not using MMCONFIG [ 0.161723] PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14 [ 0.161726] PCI: Using configuration type 1 for base access [ 0.168200] bio: create slab at 0 [ 0.173455] ACPI: BIOS _OSI(Linux) query ignored [ 0.174644] ACPI: SSDT 7fed954a 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.175141] ACPI: Dynamic OEM Table Load: [ 0.175145] ACPI: SSDT (null) 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.175479] ACPI: SSDT 7fed8edb 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.175952] ACPI: Dynamic OEM Table Load: [ 0.175956] ACPI: SSDT (null) 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.176427] ACPI: SSDT 7fed97c4 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.176914] ACPI: Dynamic OEM Table Load: [ 0.176918] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.177081] ACPI: SSDT 7fed94c5 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.177557] ACPI: Dynamic OEM Table Load: [ 0.177560] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.177642] ACPI: Interpreter enabled [ 0.177645] ACPI: (supports S0 S3 S4 S5) [ 0.177670] ACPI: Using IOAPIC for interrupt routing [ 0.177715] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.178888] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.178891] PCI: Using MMCONFIG for extended config space [ 0.221108] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.221654] ACPI: No dock devices found. [ 0.221661] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.222329] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.223654] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.223657] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.223660] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.223664] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.223667] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.223669] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.223673] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored) [ 0.223676] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) [ 0.223679] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored) [ 0.223774] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.223778] pci 0000:00:01.0: PME# disabled [ 0.223874] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f] [ 0.223946] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f] [ 0.224021] pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff] [ 0.224091] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.224097] pci 0000:00:1a.7: PME# disabled [ 0.224146] pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit] [ 0.224215] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.224220] pci 0000:00:1b.0: PME# disabled [ 0.224331] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.224336] pci 0000:00:1c.0: PME# disabled [ 0.224448] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.224454] pci 0000:00:1c.1: PME# disabled [ 0.224566] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.224571] pci 0000:00:1c.2: PME# disabled [ 0.224684] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.224689] pci 0000:00:1c.3: PME# disabled [ 0.224802] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.224807] pci 0000:00:1c.4: PME# disabled [ 0.224920] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.224925] pci 0000:00:1c.5: PME# disabled [ 0.224994] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f] [ 0.225067] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f] [ 0.225137] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f] [ 0.225205] pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff] [ 0.225275] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.225280] pci 0000:00:1d.7: PME# disabled [ 0.225452] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.225457] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.225461] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.225468] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007) [ 0.225472] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f) [ 0.225524] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.225533] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.225542] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.225551] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.225560] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af] [ 0.225629] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df] [ 0.225638] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf] [ 0.225646] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7] [ 0.225655] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb] [ 0.225663] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff] [ 0.225673] pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff] [ 0.225721] pci 0000:00:1f.2: PME# supported from D3hot [ 0.225726] pci 0000:00:1f.2: PME# disabled [ 0.225761] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff] [ 0.225789] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] [ 0.225938] pci 0000:01:00.0: reg 10: [mem 0xc6000000-0xc6ffffff] [ 0.225978] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.226019] pci 0000:01:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit] [ 0.226040] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.226061] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.256015] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.256021] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.256026] pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff] [ 0.256031] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.256103] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.256108] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.256114] pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff] [ 0.256123] pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref] [ 0.256358] pci 0000:04:00.0: reg 10: [mem 0xf0000000-0xf000ffff 64bit] [ 0.256608] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.256621] pci 0000:04:00.0: PME# disabled [ 0.256779] pci 0000:00:1c.1: PCI bridge to [bus 04-04] [ 0.256784] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.256790] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff] [ 0.256799] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref] [ 0.256868] pci 0000:00:1c.2: PCI bridge to [bus 06-06] [ 0.256873] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.256879] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.256888] pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref] [ 0.256957] pci 0000:00:1c.3: PCI bridge to [bus 08-08] [ 0.256963] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.256968] pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff] [ 0.256977] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref] [ 0.257045] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 0.257051] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.257057] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.257066] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.257273] pci 0000:0c:00.0: reg 10: [mem 0xf8000000-0xf8000fff] [ 0.257516] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.257529] pci 0000:0c:00.0: PME# disabled [ 0.257599] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.257627] pci 0000:00:1c.5: PCI bridge to [bus 0c-0c] [ 0.257633] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled) [ 0.257638] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff] [ 0.257647] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.257726] pci 0000:0e:06.0: reg 10: [mem 0xf8100000-0xf81007ff] [ 0.257790] pci 0000:0e:06.0: supports D1 D2 [ 0.257793] pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.257798] pci 0000:0e:06.0: PME# disabled [ 0.257838] pci 0000:0e:06.1: reg 10: [mem 0xf8100800-0xf81008ff] [ 0.257901] pci 0000:0e:06.1: supports D1 D2 [ 0.257903] pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.257909] pci 0000:0e:06.1: PME# disabled [ 0.257947] pci 0000:0e:06.2: reg 10: [mem 0xf8100c00-0xf8100cff] [ 0.258010] pci 0000:0e:06.2: supports D1 D2 [ 0.258013] pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.258018] pci 0000:0e:06.2: PME# disabled [ 0.258079] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode) [ 0.258085] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.258090] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff] [ 0.258099] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.258102] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.258105] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.258158] pci_bus 0000:00: on NUMA node 0 [ 0.258169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.258477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.258582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.258672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.258762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.258849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.258938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.259026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.259155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.267914] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.268037] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.268148] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.268260] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.268369] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.268480] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.268589] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.268698] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.268751] HEST: Table is not found! [ 0.268853] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.268860] vgaarb: loaded [ 0.269046] SCSI subsystem initialized [ 0.269130] libata version 3.00 loaded. [ 0.269187] usbcore: registered new interface driver usbfs [ 0.269201] usbcore: registered new interface driver hub [ 0.269228] usbcore: registered new device driver usb [ 0.269444] ACPI: WMI: Mapper loaded [ 0.269446] PCI: Using ACPI for IRQ routing [ 0.269734] PCI: pci_cache_line_size set to 64 bytes [ 0.269960] reserve RAM buffer: 0000000000002000 - 000000000000ffff [ 0.269963] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.269966] reserve RAM buffer: 000000007fed0000 - 000000007fffffff [ 0.270067] NetLabel: Initializing [ 0.270069] NetLabel: domain hash size = 128 [ 0.270071] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.270084] NetLabel: unlabeled traffic allowed by default [ 0.270116] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.270123] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.270129] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.280035] Switching to clocksource tsc [ 0.292062] AppArmor: AppArmor Filesystem Enabled [ 0.292080] pnp: PnP ACPI init [ 0.292100] ACPI: bus type pnp registered [ 0.312268] pnp: PnP ACPI: found 11 devices [ 0.312271] ACPI: ACPI bus type pnp unregistered [ 0.312276] PnPBIOS: Disabled by ACPI PNP [ 0.312291] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.312295] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.312298] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.312301] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.312304] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.312308] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.312311] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.312318] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.312326] system 00:06: [io 0x0680-0x069f] has been reserved [ 0.312329] system 00:06: [io 0x0800-0x080f] has been reserved [ 0.312332] system 00:06: [io 0x1000-0x107f] has been reserved [ 0.312335] system 00:06: [io 0x1180-0x11bf] has been reserved [ 0.312338] system 00:06: [io 0x1640-0x164f] has been reserved [ 0.312342] system 00:06: [io 0xfe00] has been reserved [ 0.312345] system 00:06: [io 0xff00-0xff7f] has been reserved [ 0.348600] pci 0000:00:1c.4: BAR 14: assigned [mem 0x80000000-0x801fffff] [ 0.348605] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.348609] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] [ 0.348613] pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff] [ 0.348617] pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff] [ 0.348620] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80600000-0x806000ff] [ 0.348627] pci 0000:00:1f.3: BAR 0: set to [mem 0x80600000-0x806000ff] (PCI address [0x80600000-0x806000ff] [ 0.348632] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.348635] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.348638] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.348643] pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff] [ 0.348647] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.348652] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.348656] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.348663] pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff] [ 0.348669] pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref] [ 0.348678] pci 0000:00:1c.1: PCI bridge to [bus 04-04] [ 0.348682] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.348689] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff] [ 0.348695] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref] [ 0.348704] pci 0000:00:1c.2: PCI bridge to [bus 06-06] [ 0.348707] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.348714] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.348720] pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref] [ 0.348729] pci 0000:00:1c.3: PCI bridge to [bus 08-08] [ 0.348733] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.348740] pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff] [ 0.348745] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref] [ 0.348754] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 0.348758] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff] [ 0.348764] pci 0000:00:1c.4: bridge window [mem 0x80000000-0x801fffff] [ 0.348770] pci 0000:00:1c.4: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.348779] pci 0000:00:1c.5: PCI bridge to [bus 0c-0c] [ 0.348783] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff] [ 0.348790] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff] [ 0.348795] pci 0000:00:1c.5: bridge window [mem 0x80400000-0x805fffff 64bit pref] [ 0.348805] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] [ 0.348807] pci 0000:00:1e.0: bridge window [io disabled] [ 0.348813] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff] [ 0.348819] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.348841] alloc irq_desc for 16 on node -1 [ 0.348844] alloc kstat_irqs on node -1 [ 0.348851] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348856] pci 0000:00:01.0: setting latency timer to 64 [ 0.348867] alloc irq_desc for 17 on node -1 [ 0.348869] alloc kstat_irqs on node -1 [ 0.348873] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.348879] pci 0000:00:1c.0: setting latency timer to 64 [ 0.348891] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.348897] pci 0000:00:1c.1: setting latency timer to 64 [ 0.348908] alloc irq_desc for 18 on node -1 [ 0.348910] alloc kstat_irqs on node -1 [ 0.348914] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.348920] pci 0000:00:1c.2: setting latency timer to 64 [ 0.348932] alloc irq_desc for 19 on node -1 [ 0.348933] alloc kstat_irqs on node -1 [ 0.348937] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.348943] pci 0000:00:1c.3: setting latency timer to 64 [ 0.348955] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.348960] pci 0000:00:1c.4: setting latency timer to 64 [ 0.348972] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.348978] pci 0000:00:1c.5: setting latency timer to 64 [ 0.348988] pci 0000:00:1e.0: setting latency timer to 64 [ 0.348993] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.348996] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.348999] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.349002] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xc6ffffff] [ 0.349004] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.349007] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.349010] pci_bus 0000:02: resource 1 [mem 0xbc000000-0xbfffffff] [ 0.349013] pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref] [ 0.349015] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.349018] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff] [ 0.349021] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref] [ 0.349023] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff] [ 0.349026] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.349028] pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref] [ 0.349031] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff] [ 0.349034] pci_bus 0000:08: resource 1 [mem 0xb4000000-0xb7ffffff] [ 0.349036] pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref] [ 0.349039] pci_bus 0000:0a: resource 0 [io 0x7000-0x7fff] [ 0.349041] pci_bus 0000:0a: resource 1 [mem 0x80000000-0x801fffff] [ 0.349044] pci_bus 0000:0a: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.349047] pci_bus 0000:0c: resource 0 [io 0x8000-0x8fff] [ 0.349049] pci_bus 0000:0c: resource 1 [mem 0xf8000000-0xf80fffff] [ 0.349052] pci_bus 0000:0c: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 0.349055] pci_bus 0000:0e: resource 1 [mem 0xf8100000-0xf81fffff] [ 0.349057] pci_bus 0000:0e: resource 4 [io 0x0000-0xffff] [ 0.349060] pci_bus 0000:0e: resource 5 [mem 0x00000000-0xffffffff] [ 0.349105] NET: Registered protocol family 2 [ 0.349185] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.349466] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.349928] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.350161] TCP: Hash tables configured (established 131072 bind 65536) [ 0.350164] TCP reno registered [ 0.350167] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.350177] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.350265] NET: Registered protocol family 1 [ 0.350540] PCI: CLS 64 bytes, default 64 [ 0.350568] Simple Boot Flag at 0x38 set to 0x1 [ 0.350755] cpufreq-nforce2: No nForce2 chipset. [ 0.350795] Scanning for low memory corruption every 60 seconds [ 0.350940] audit: initializing netlink socket (disabled) [ 0.350950] type=2000 audit(1287058477.344:1): initialized [ 0.362071] highmem bounce pool size: 64 pages [ 0.362078] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.363696] VFS: Disk quotas dquot_6.5.2 [ 0.363764] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.364426] fuse init (API version 7.14) [ 0.364522] msgmni has been set to 1683 [ 0.364892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.364895] io scheduler noop registered [ 0.364897] io scheduler deadline registered [ 0.364911] io scheduler cfq registered (default) [ 0.365050] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.365081] alloc irq_desc for 40 on node -1 [ 0.365083] alloc kstat_irqs on node -1 [ 0.365093] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.365176] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.365227] alloc irq_desc for 41 on node -1 [ 0.365229] alloc kstat_irqs on node -1 [ 0.365238] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.365350] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.365401] alloc irq_desc for 42 on node -1 [ 0.365403] alloc kstat_irqs on node -1 [ 0.365413] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.365524] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.365573] alloc irq_desc for 43 on node -1 [ 0.365575] alloc kstat_irqs on node -1 [ 0.365585] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.365694] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.365746] alloc irq_desc for 44 on node -1 [ 0.365748] alloc kstat_irqs on node -1 [ 0.365757] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X [ 0.365866] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.365917] alloc irq_desc for 45 on node -1 [ 0.365919] alloc kstat_irqs on node -1 [ 0.365928] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X [ 0.366042] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.366093] alloc irq_desc for 46 on node -1 [ 0.366095] alloc kstat_irqs on node -1 [ 0.366104] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X [ 0.366235] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.366439] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.366545] intel_idle: MWAIT substates: 0x22220 [ 0.366547] intel_idle: does not run on family 6 model 15 [ 0.371384] ACPI: AC Adapter [ACAD] (on-line) [ 0.371454] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.371496] ACPI: Lid Switch [LID0] [ 0.371546] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.371551] ACPI: Power Button [PWRB] [ 0.371614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.371618] ACPI: Power Button [PWRF] [ 0.371947] ACPI: acpi_idle registered with cpuidle [ 0.383956] Monitor-Mwait will be used to enter C-1 state [ 0.384265] Monitor-Mwait will be used to enter C-2 state [ 0.384291] Monitor-Mwait will be used to enter C-3 state [ 0.384298] Marking TSC unstable due to TSC halts in idle [ 0.391969] Switching to clocksource hpet [ 0.420468] ERST: Table is not found! [ 0.420743] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.422440] brd: module loaded [ 0.423050] loop: module loaded [ 0.423245] ata_piix 0000:00:1f.1: version 2.13 [ 0.423259] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.423308] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.423462] scsi0 : ata_piix [ 0.423543] scsi1 : ata_piix [ 0.424238] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 0.424242] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 0.424614] Fixed MDIO Bus: probed [ 0.424652] PPP generic driver version 2.4.2 [ 0.424697] tun: Universal TUN/TAP device driver, 1.6 [ 0.424699] tun: (C) 1999-2004 Max Krasnyansky [ 0.424782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.424803] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.424820] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.424824] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.424859] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.424891] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.428782] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.429330] isapnp: Scanning for PnP cards... [ 0.429364] ACPI: Battery Slot [BAT1] (battery present) [ 0.429560] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800 [ 0.442074] Freeing initrd memory: 10516k freed [ 0.448270] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.448477] hub 1-0:1.0: USB hub found [ 0.448483] hub 1-0:1.0: 4 ports detected [ 0.448596] alloc irq_desc for 23 on node -1 [ 0.448599] alloc kstat_irqs on node -1 [ 0.448609] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.448633] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.448637] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.448680] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.448715] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.452620] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.452642] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00 [ 0.468014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.468137] hub 2-0:1.0: USB hub found [ 0.468141] hub 2-0:1.0: 6 ports detected [ 0.468239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.468260] uhci_hcd: USB Universal Host Controller Interface driver [ 0.468304] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.468312] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.468317] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.468355] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.468395] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.468521] hub 3-0:1.0: USB hub found [ 0.468526] hub 3-0:1.0: 2 ports detected [ 0.468601] alloc irq_desc for 21 on node -1 [ 0.468603] alloc kstat_irqs on node -1 [ 0.468608] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.468615] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.468619] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.468654] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.468695] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.468832] hub 4-0:1.0: USB hub found [ 0.468837] hub 4-0:1.0: 2 ports detected [ 0.468911] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.468918] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.468922] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.468956] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.468985] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 0.469113] hub 5-0:1.0: USB hub found [ 0.469117] hub 5-0:1.0: 2 ports detected [ 0.469190] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.469197] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.469201] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.469243] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.469283] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 0.469410] hub 6-0:1.0: USB hub found [ 0.469414] hub 6-0:1.0: 2 ports detected [ 0.469490] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.469497] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.469501] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.469534] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.469564] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 0.469691] hub 7-0:1.0: USB hub found [ 0.469696] hub 7-0:1.0: 2 ports detected [ 0.469842] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.503376] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.503384] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.503452] mice: PS/2 mouse device common for all mice [ 0.503594] rtc_cmos 00:07: RTC can wake from S4 [ 0.503642] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.503677] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.503793] device-mapper: uevent: version 1.0.3 [ 0.503916] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.503990] device-mapper: multipath: version 1.1.1 loaded [ 0.503993] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.504125] EISA: Probing bus 0 at eisa.0 [ 0.504132] Cannot allocate resource for EISA slot 1 [ 0.504135] Cannot allocate resource for EISA slot 2 [ 0.504138] Cannot allocate resource for EISA slot 3 [ 0.504140] Cannot allocate resource for EISA slot 4 [ 0.504142] Cannot allocate resource for EISA slot 5 [ 0.504144] Cannot allocate resource for EISA slot 6 [ 0.504147] Cannot allocate resource for EISA slot 7 [ 0.504149] Cannot allocate resource for EISA slot 8 [ 0.504151] EISA: Detected 0 cards. [ 0.504302] cpuidle: using governor ladder [ 0.504418] cpuidle: using governor menu [ 0.504777] TCP cubic registered [ 0.504930] NET: Registered protocol family 10 [ 0.505338] lo: Disabled Privacy Extensions [ 0.505604] NET: Registered protocol family 17 [ 0.506254] Using IPI No-Shortcut mode [ 0.506334] PM: Resume from disk failed. [ 0.506347] registered taskstats version 1 [ 0.506908] Magic number: 14:515:228 [ 0.507006] rtc_cmos 00:07: setting system clock to 2010-10-14 12:14:38 UTC (1287058478) [ 0.507010] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.507011] EDD information not available. [ 0.534009] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.599559] ata1.00: ATAPI: Optiarc DVD RW AD-7530B, NX03, max UDMA/33 [ 0.653173] ata1.00: configured for UDMA/33 [ 0.783611] isapnp: No Plug & Play device found [ 0.785038] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX03 PQ: 0 ANSI: 5 [ 0.795135] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.795140] Uniform CD-ROM driver Revision: 3.20 [ 0.795300] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.795385] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.795461] Freeing unused kernel memory: 684k freed [ 0.795906] Write protecting the kernel text: 4932k [ 0.795968] Write protecting the kernel read-only data: 1976k [ 0.808028] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 0.813696] udev[86]: starting version 163 [ 0.919281] tg3.c:v3.110 (April 9, 2010) [ 0.919351] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.919368] tg3 0000:04:00.0: setting latency timer to 64 [ 0.939786] ahci 0000:00:1f.2: version 3.0 [ 0.939806] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.939854] alloc irq_desc for 47 on node -1 [ 0.939856] alloc kstat_irqs on node -1 [ 0.939869] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X [ 0.939943] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 0.939947] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 0.939953] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.941074] sdhci: Secure Digital Host Controller Interface driver [ 0.941077] sdhci: Copyright(c) Pierre Ossman [ 0.942517] sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22) [ 0.942535] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 0.943550] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 0.944585] Registered led device: mmc0:: [ 0.963010] scsi2 : ahci [ 0.963361] mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA [ 0.970461] alloc irq_desc for 22 on node -1 [ 0.970464] alloc kstat_irqs on node -1 [ 0.970472] firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.970540] scsi3 : ahci [ 0.980015] scsi4 : ahci [ 0.980201] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 47 [ 0.980206] ata4: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 47 [ 0.980210] ata5: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 47 [ 0.996011] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 1.056024] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 1.065045] firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0 [ 1.116022] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. [ 1.117261] tg3 0000:04:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1b:38:d6:8f:6b [ 1.117265] tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.117268] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.117271] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.196054] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.300076] ata4: SATA link down (SStatus 0 SControl 300) [ 1.300103] ata5: SATA link down (SStatus 0 SControl 300) [ 1.300130] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.301678] ata3.00: unexpected _GTF length (8) [ 1.301782] ata3.00: ATA-7: ST980816AS, 3.AAH, max UDMA/133 [ 1.301788] ata3.00: 156301488 sectors, multi 0: LBA48 [ 1.303571] ata3.00: unexpected _GTF length (8) [ 1.303703] ata3.00: configured for UDMA/133 [ 1.316285] scsi 2:0:0:0: Direct-Access ATA ST980816AS 3.AA PQ: 0 ANSI: 5 [ 1.316446] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.316517] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.316679] sd 2:0:0:0: [sda] Write Protect is off [ 1.316682] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.316738] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.317058] sda: sda1 sda2 < [ 1.333772] hub 2-1:1.0: USB hub found [ 1.334328] hub 2-1:1.0: 4 ports detected [ 1.354569] sda5 > [ 1.354981] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.556167] firewire_core: created device fw0: GUID 00023f82cd403a37, S400 [ 1.577046] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 1.794831] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.828334] usb 2-1.1: new low speed USB device using ehci_hcd and address 3 [ 2.000329] usb 2-1.3: new full speed USB device using ehci_hcd and address 4 [ 2.172331] usb 2-1.4: new high speed USB device using ehci_hcd and address 5 [ 2.266009] hub 2-1.4:1.0: USB hub found [ 2.266329] hub 2-1.4:1.0: 4 ports detected [ 2.541328] usb 2-1.4.4: new high speed USB device using ehci_hcd and address 6 [ 17.016511] udev[352]: starting version 163 [ 17.164329] Adding 3227644k swap on /dev/sda5. Priority:-1 extents:1 across:3227644k [ 17.194900] Linux agpgart interface v0.103 [ 17.199364] compal-laptop: Identified laptop model 'FL92/JFL92'. [ 17.212142] compal-laptop: driver 0.2.6 successfully loaded. [ 17.232592] lp: driver loaded but no devices found [ 17.342284] Linux video capture interface: v2.00 [ 17.345943] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018) [ 17.352735] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input4 [ 17.353155] usbcore: registered new interface driver uvcvideo [ 17.353158] USB Video Class driver (v0.1.0) [ 17.354902] cfg80211: Calling CRDA to update world regulatory domain [ 17.370450] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 17.380041] acpi device:03: registered as cooling_device2 [ 17.380204] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 17.380258] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 17.390986] input: Wacom Intuos3 4x6 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/input/input6 [ 17.391635] usbcore: registered new interface driver wacom [ 17.391638] wacom: v1.52:USB Wacom tablet driver [ 17.406181] Initializing USB Mass Storage driver... [ 17.419158] type=1400 audit(1287058495.405:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=587 comm="apparmor_parser" [ 17.419895] type=1400 audit(1287058495.405:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser" [ 17.420297] type=1400 audit(1287058495.409:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser" [ 17.425169] cfg80211: World regulatory domain updated: [ 17.425173] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.425176] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.425179] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.425182] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.425185] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.425188] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.425288] usbcore: registered new interface driver hiddev [ 17.430336] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.0/input/input7 [ 17.430437] generic-usb 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.7-1.1/input0 [ 17.433084] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.1/input/input8 [ 17.433170] generic-usb 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.7-1.1/input1 [ 17.433192] usbcore: registered new interface driver usbhid [ 17.433194] usbhid: USB HID core driver [ 17.435103] scsi5 : usb-storage 2-1.4.4:1.0 [ 17.444824] usbcore: registered new interface driver usb-storage [ 17.444827] USB Mass Storage support registered. [ 17.497663] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 17.497667] iwl3945: Copyright(c) 2003-2010 Intel Corporation [ 17.497745] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 17.497761] iwl3945 0000:0c:00.0: setting latency timer to 64 [ 17.578455] iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 17.578460] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 17.578578] alloc irq_desc for 48 on node -1 [ 17.578580] alloc kstat_irqs on node -1 [ 17.578613] iwl3945 0000:0c:00.0: irq 48 for MSI/MSI-X [ 17.609416] alloc irq_desc for 20 on node -1 [ 17.609420] alloc kstat_irqs on node -1 [ 17.609427] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 17.609481] alloc irq_desc for 49 on node -1 [ 17.609483] alloc kstat_irqs on node -1 [ 17.609495] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 17.609531] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 17.610218] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 17.697445] psmouse serio1: ID: 10 00 64 [ 17.935726] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 17.946041] elantech: assuming hardware version 1, firmware version 2.0.4 [ 17.967882] nvidia: module license 'NVIDIA' taints kernel. [ 17.967886] Disabling lock debugging due to kernel taint [ 18.045871] elantech: Synaptics capabilities query result 0x10, 0x02, 0x64. [ 18.451258] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 9138 PQ: 0 ANSI: 0 [ 18.452762] scsi 5:0:0:1: Direct-Access Generic STORAGE DEVICE 9138 PQ: 0 ANSI: 0 [ 18.456739] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 18.457639] sd 5:0:0:1: Attached scsi generic sg3 type 0 [ 18.477234] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 18.478609] sd 5:0:0:1: [sdc] Attached SCSI removable disk [ 18.761947] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9 [ 18.981016] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 18.981028] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 18.981035] nvidia 0000:01:00.0: enabling device (0000 -> 0003) [ 18.981043] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 18.981054] nvidia 0000:01:00.0: setting latency timer to 64 [ 18.981060] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 18.981091] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed [ 18.981092] NVRM: in this system is not supported by the 260.19.06 NVIDIA Linux [ 18.981093] NVRM: graphics driver release. Please see 'Appendix A - [ 18.981095] NVRM: Supported NVIDIA GPU Products' in this release's README, [ 18.981096] NVRM: available on the Linux graphics driver download page at [ 18.981097] NVRM: www.nvidia.com. [ 18.981103] nvidia: probe of 0000:01:00.0 failed with error -1 [ 18.981128] NVRM: The NVIDIA probe routine failed for 1 device(s). [ 18.981130] NVRM: None of the NVIDIA graphics adapters were initialized! [ 19.085220] type=1400 audit(1287058497.073:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=882 comm="apparmor_parser" [ 19.085296] type=1400 audit(1287058497.073:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=883 comm="apparmor_parser" [ 19.086035] type=1400 audit(1287058497.073:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=883 comm="apparmor_parser" [ 19.086438] type=1400 audit(1287058497.073:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=883 comm="apparmor_parser" [ 19.088953] type=1400 audit(1287058497.077:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=884 comm="apparmor_parser" [ 19.089443] type=1400 audit(1287058497.077:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=886 comm="apparmor_parser" [ 19.090655] type=1400 audit(1287058497.077:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=886 comm="apparmor_parser" [ 19.134025] alloc irq_desc for 50 on node -1 [ 19.134028] alloc kstat_irqs on node -1 [ 19.134060] tg3 0000:04:00.0: irq 50 for MSI/MSI-X [ 19.163068] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.464751] ppdev: user-space parallel port driver