[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7fb0000 (usable) [ 0.000000] BIOS-e820: 00000000c7fb0000 - 00000000c7fbe000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7fbe000 - 00000000c7fe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7fe0000 - 00000000c7fee000 (reserved) [ 0.000000] BIOS-e820: 00000000c7ff0000 - 00000000c8000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xc7fb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000138000000 aka 4992M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000c7fb0000 (usable) [ 0.000000] modified: 00000000c7fb0000 - 00000000c7fbe000 (ACPI data) [ 0.000000] modified: 00000000c7fbe000 - 00000000c7fe0000 (ACPI NVS) [ 0.000000] modified: 00000000c7fe0000 - 00000000c7fee000 (reserved) [ 0.000000] modified: 00000000c7ff0000 - 00000000c8000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000138000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 7f70f000 - 7fffe853 [ 0.000000] Allocated new RAMDISK: 008de000 - 011cd853 [ 0.000000] Move RAMDISK from 000000007f70f000 - 000000007fffe852 to 008de000 - 011cd852 [ 0.000000] ACPI: RSDP 000fa6c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT c7fb0000 00038 (v01 052209 RSDT1909 20090522 MSFT 00000097) [ 0.000000] ACPI: FACP c7fb0200 00084 (v01 052209 FACP1909 20090522 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557) [ 0.000000] ACPI: DSDT c7fb0490 09ADF (v01 78DFA 78DFA522 00000000 INTL 20051117) [ 0.000000] ACPI: FACS c7fbe000 00040 [ 0.000000] ACPI: APIC c7fb0390 0006C (v01 052209 APIC1909 20090522 MSFT 00000097) [ 0.000000] ACPI: MCFG c7fb0400 0003C (v01 052209 OEMMCFG 20090522 MSFT 00000097) [ 0.000000] ACPI: OEMB c7fbe040 00072 (v01 052209 OEMB1909 20090522 MSFT 00000097) [ 0.000000] ACPI: HPET c7fb9f70 00038 (v01 052209 OEMHPET 20090522 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2311MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd0ed] BRK ==> [00008da000 - 00008dd0ed] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 00011cd853] NEW RAMDISK ==> [00008de000 - 00011cd853] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000c7fb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000c7fb0 [ 0.000000] On node 0 totalpages: 819007 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c11cf200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4624 pages used for memmap [ 0.000000] HighMem zone: 587170 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:18000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u1048576 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 812607 [ 0.000000] Kernel command line: bootkbd=us console-setup/layoutcode=en_US console-setup/variantcode=nodeadkeys locale=us_us persistent noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz splash -- BOOT_IMAGE=/casper/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 16382080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000c7fb0) [ 0.000000] Memory: 3214964k/3276480k available (4673k kernel code, 59916k reserved, 2122k data, 656k init, 2367176k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3100.574 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6201.14 BogoMIPS (lpj=12402296) [ 0.004117] Security Framework initialized [ 0.004179] AppArmor: AppArmor initialized [ 0.004234] Mount-cache hash table entries: 512 [ 0.004355] Initializing cgroup subsys ns [ 0.004411] Initializing cgroup subsys cpuacct [ 0.004464] Initializing cgroup subsys memory [ 0.004518] Initializing cgroup subsys devices [ 0.004570] Initializing cgroup subsys freezer [ 0.004622] Initializing cgroup subsys net_cls [ 0.004682] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004737] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004789] CPU: Physical Processor ID: 0 [ 0.004840] CPU: Processor Core ID: 0 [ 0.004891] mce: CPU supports 6 MCE banks [ 0.004947] using C1E aware idle routine [ 0.005001] Performance Events: AMD PMU driver. [ 0.005093] ... version: 0 [ 0.005144] ... bit width: 48 [ 0.005194] ... generic registers: 4 [ 0.005245] ... value mask: 0000ffffffffffff [ 0.008002] ... max period: 00007fffffffffff [ 0.008055] ... fixed-purpose events: 0 [ 0.008105] ... event mask: 000000000000000f [ 0.008159] Checking 'hlt' instruction... OK. [ 0.025527] ACPI: Core revision 20090903 [ 0.036007] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036062] ftrace: allocating 21771 entries in 43 pages [ 0.040046] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040397] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081969] CPU0: AMD Phenom(tm) II X2 550 Processor stepping 03 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.168023] CPU1: AMD Phenom(tm) II X2 550 Processor stepping 03 [ 0.168425] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172010] Brought up 2 CPUs [ 0.172060] Total of 2 processors activated (12402.42 BogoMIPS). [ 0.174683] CPU0 attaching sched-domain: [ 0.174685] domain 0: span 0-1 level MC [ 0.174687] groups: 0 1 [ 0.174690] CPU1 attaching sched-domain: [ 0.174691] domain 0: span 0-1 level MC [ 0.174693] groups: 1 0 [ 0.174744] devtmpfs: initialized [ 0.174744] regulator: core version 0.5 [ 0.174744] Time: 22:53:33 Date: 09/25/10 [ 0.174744] NET: Registered protocol family 16 [ 0.174744] Trying to unpack rootfs image as initramfs... [ 0.174744] EISA bus registered [ 0.174744] ACPI: bus type pci registered [ 0.174744] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.174744] PCI: MCFG area at e0000000 reserved in E820 [ 0.174744] PCI: Using MMCONFIG for extended config space [ 0.174744] PCI: Using configuration type 1 for base access [ 0.236093] bio: create slab at 0 [ 0.236599] ACPI: EC: Look up EC in DSDT [ 0.237612] ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND [ 0.237755] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c08ce7dc), AE_NOT_FOUND [ 0.238114] ACPI: Executed 5 blocks of module-level executable AML code [ 0.243473] ACPI: Interpreter enabled [ 0.243527] ACPI: (supports S0 S1 S4 S5) [ 0.243740] ACPI: Using IOAPIC for interrupt routing [ 0.247857] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 0.248002] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.248141] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node f701a660), AE_NOT_EXIST [ 0.248341] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 0.248482] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.248622] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node f701a708), AE_NOT_EXIST [ 0.248836] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 0.248977] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.249116] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node f701a870), AE_NOT_EXIST [ 0.249316] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 0.249457] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.249596] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node f701a918), AE_NOT_EXIST [ 0.249862] ACPI Warning: Incorrect checksum in table [OEMB] - F9, should be F1 (20090903/tbutils-314) [ 0.250074] ACPI: No dock devices found. [ 0.250242] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.250370] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.250425] pci 0000:00:03.0: PME# disabled [ 0.250506] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.250560] pci 0000:00:07.0: PME# disabled [ 0.250658] pci 0000:00:11.0: reg 10 io port: [0xc000-0xc007] [ 0.250664] pci 0000:00:11.0: reg 14 io port: [0xb000-0xb003] [ 0.250670] pci 0000:00:11.0: reg 18 io port: [0xa000-0xa007] [ 0.250676] pci 0000:00:11.0: reg 1c io port: [0x9000-0x9003] [ 0.250682] pci 0000:00:11.0: reg 20 io port: [0x8000-0x800f] [ 0.250688] pci 0000:00:11.0: reg 24 32bit mmio: [0xfcfff800-0xfcfffbff] [ 0.250704] pci 0000:00:11.0: set SATA to AHCI mode [ 0.250796] pci 0000:00:12.0: reg 10 32bit mmio: [0xfcffe000-0xfcffefff] [ 0.250845] pci 0000:00:12.1: reg 10 32bit mmio: [0xfcffd000-0xfcffdfff] [ 0.250911] pci 0000:00:12.2: reg 10 32bit mmio: [0xfcfff000-0xfcfff0ff] [ 0.250958] pci 0000:00:12.2: supports D1 D2 [ 0.250960] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.251015] pci 0000:00:12.2: PME# disabled [ 0.251093] pci 0000:00:13.0: reg 10 32bit mmio: [0xfcffc000-0xfcffcfff] [ 0.251142] pci 0000:00:13.1: reg 10 32bit mmio: [0xfcffb000-0xfcffbfff] [ 0.251207] pci 0000:00:13.2: reg 10 32bit mmio: [0xfcffa800-0xfcffa8ff] [ 0.251255] pci 0000:00:13.2: supports D1 D2 [ 0.251256] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.251312] pci 0000:00:13.2: PME# disabled [ 0.251467] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.251473] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.251478] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.251484] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.251490] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.251549] pci 0000:00:14.2: reg 10 64bit mmio: [0xfcff4000-0xfcff7fff] [ 0.251588] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.251643] pci 0000:00:14.2: PME# disabled [ 0.251788] pci 0000:00:14.5: reg 10 32bit mmio: [0xfcff9000-0xfcff9fff] [ 0.251907] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.251915] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.251923] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff] [ 0.251928] pci 0000:01:00.0: reg 24 io port: [0xd800-0xd87f] [ 0.251933] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe980000-0xfe9fffff] [ 0.251987] pci 0000:01:00.1: reg 10 32bit mmio: [0xfe97c000-0xfe97ffff] [ 0.252083] pci 0000:00:03.0: bridge io port: [0xd000-0xdfff] [ 0.252086] pci 0000:00:03.0: bridge 32bit mmio: [0xfd000000-0xfe9fffff] [ 0.252089] pci 0000:00:03.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff] [ 0.252118] pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.252132] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfbfff000-0xfbffffff] [ 0.252141] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfbff8000-0xfbffbfff] [ 0.252147] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff] [ 0.252173] pci 0000:02:00.0: supports D1 D2 [ 0.252175] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.252243] pci 0000:02:00.0: PME# disabled [ 0.252346] pci 0000:00:07.0: bridge io port: [0xe000-0xefff] [ 0.252348] pci 0000:00:07.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.252351] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfbf00000-0xfbffffff] [ 0.252396] pci 0000:03:05.0: reg 10 32bit mmio: [0xfebf8000-0xfebfffff] [ 0.252497] pci 0000:00:14.4: transparent bridge [ 0.252554] pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.252566] pci_bus 0000:00: on NUMA node 0 [ 0.252569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.252699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT] [ 0.252742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.252793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.255792] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.256242] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15) [ 0.256713] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.257183] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.257654] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15) [ 0.258114] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.258669] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 9 10 *11 12 14 15) [ 0.259214] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.259749] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.259816] vgaarb: loaded [ 0.259931] SCSI subsystem initialized [ 0.260037] libata version 3.00 loaded. [ 0.260073] usbcore: registered new interface driver usbfs [ 0.260135] usbcore: registered new interface driver hub [ 0.260199] usbcore: registered new device driver usb [ 0.260317] ACPI: WMI: Mapper loaded [ 0.260367] PCI: Using ACPI for IRQ routing [ 0.260523] NetLabel: Initializing [ 0.260577] NetLabel: domain hash size = 128 [ 0.260629] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.260687] NetLabel: unlabeled traffic allowed by default [ 0.260759] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.260999] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.263059] Switching to clocksource tsc [ 1.435673] AppArmor: AppArmor Filesystem Enabled [ 1.435673] pnp: PnP ACPI init [ 1.435673] ACPI: bus type pnp registered [ 1.435876] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 1.436037] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.436177] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node f701a660), AE_NOT_EXIST [ 1.436371] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node f701a660), AE_NOT_EXIST [ 1.436559] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 1.436700] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.436839] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node f701a708), AE_NOT_EXIST [ 1.437032] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node f701a708), AE_NOT_EXIST [ 1.437225] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 1.437366] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.437505] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node f701a870), AE_NOT_EXIST [ 1.437697] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node f701a870), AE_NOT_EXIST [ 1.437883] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 1.438024] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.438163] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node f701a918), AE_NOT_EXIST [ 1.438356] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node f701a918), AE_NOT_EXIST [ 1.438536] pnp: PnP ACPI: found 14 devices [ 1.438587] ACPI: ACPI bus type pnp unregistered [ 1.438640] PnPBIOS: Disabled by ACPI PNP [ 1.438702] system 00:08: ioport range 0xe00-0xe0f has been reserved [ 1.438757] system 00:08: ioport range 0xe80-0xe8f has been reserved [ 1.438811] system 00:08: ioport range 0xf40-0xf4f has been reserved [ 1.438865] system 00:08: ioport range 0xa30-0xa3f has been reserved [ 1.438921] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.438985] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.439042] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 1.439097] system 00:0b: ioport range 0x40b-0x40b has been reserved [ 1.439151] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved [ 1.439205] system 00:0b: ioport range 0xc00-0xc01 has been reserved [ 1.439259] system 00:0b: ioport range 0xc14-0xc14 has been reserved [ 1.439313] system 00:0b: ioport range 0xc50-0xc51 has been reserved [ 1.439367] system 00:0b: ioport range 0xc52-0xc52 has been reserved [ 1.439421] system 00:0b: ioport range 0xc6c-0xc6c has been reserved [ 1.439475] system 00:0b: ioport range 0xc6f-0xc6f has been reserved [ 1.439529] system 00:0b: ioport range 0xcd0-0xcd1 has been reserved [ 1.439583] system 00:0b: ioport range 0xcd2-0xcd3 has been reserved [ 1.439637] system 00:0b: ioport range 0xcd4-0xcd5 has been reserved [ 1.439691] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved [ 1.439744] system 00:0b: ioport range 0xcd8-0xcdf has been reserved [ 1.439798] system 00:0b: ioport range 0x800-0x89f has been reserved [ 1.439852] system 00:0b: ioport range 0xb00-0xb0f has been reserved [ 1.439906] system 00:0b: ioport range 0xb20-0xb3f has been reserved [ 1.439960] system 00:0b: ioport range 0x900-0x90f has been reserved [ 1.440021] system 00:0b: ioport range 0x910-0x91f has been reserved [ 1.440075] system 00:0b: ioport range 0xfe00-0xfefe has been reserved [ 1.440130] system 00:0b: iomem range 0xffb80000-0xffbfffff has been reserved [ 1.440185] system 00:0b: iomem range 0xfec10000-0xfec1001f has been reserved [ 1.440242] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 1.440298] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 1.440353] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 1.440408] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 1.440463] system 00:0d: iomem range 0x100000-0xc7ffffff could not be reserved [ 1.440527] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved [ 1.456716] Freeing initrd memory: 9150k freed [ 1.475265] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 1.475319] pci 0000:00:03.0: IO window: 0xd000-0xdfff [ 1.475373] pci 0000:00:03.0: MEM window: 0xfd000000-0xfe9fffff [ 1.475427] pci 0000:00:03.0: PREFETCH window: 0x000000ce000000-0x000000dfffffff [ 1.475492] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02 [ 1.475546] pci 0000:00:07.0: IO window: 0xe000-0xefff [ 1.475599] pci 0000:00:07.0: MEM window: 0xfea00000-0xfeafffff [ 1.475653] pci 0000:00:07.0: PREFETCH window: 0x000000fbf00000-0x000000fbffffff [ 1.475718] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 1.475771] pci 0000:00:14.4: IO window: disabled [ 1.475826] pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff [ 1.475881] pci 0000:00:14.4: PREFETCH window: disabled [ 1.475942] alloc irq_desc for 19 on node -1 [ 1.475944] alloc kstat_irqs on node -1 [ 1.475947] pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.476008] pci 0000:00:03.0: setting latency timer to 64 [ 1.476013] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.478034] pci 0000:00:07.0: setting latency timer to 64 [ 1.478040] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.478042] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 1.478044] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 1.478046] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfe9fffff] [ 1.478047] pci_bus 0000:01: resource 2 pref mem [0xce000000-0xdfffffff] [ 1.478049] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 1.478051] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 1.478053] pci_bus 0000:02: resource 2 pref mem [0xfbf00000-0xfbffffff] [ 1.478055] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 1.478056] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 1.478058] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 1.478084] NET: Registered protocol family 2 [ 1.478198] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.478463] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.478929] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.479190] TCP: Hash tables configured (established 131072 bind 65536) [ 1.479248] TCP reno registered [ 1.479349] NET: Registered protocol family 1 [ 1.644042] pci 0000:01:00.0: Boot video device [ 1.644191] cpufreq-nforce2: No nForce2 chipset. [ 1.644261] Scanning for low memory corruption every 60 seconds [ 1.644373] audit: initializing netlink socket (disabled) [ 1.644434] type=2000 audit(1285455214.644:1): initialized [ 1.650333] highmem bounce pool size: 64 pages [ 1.650387] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.651336] VFS: Disk quotas dquot_6.5.2 [ 1.651421] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.651825] fuse init (API version 7.13) [ 1.651924] msgmni has been set to 1675 [ 1.652127] alg: No test for stdrng (krng) [ 1.652212] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.652277] io scheduler noop registered [ 1.652327] io scheduler anticipatory registered [ 1.652379] io scheduler deadline registered [ 1.652454] io scheduler cfq registered (default) [ 1.652582] alloc irq_desc for 25 on node -1 [ 1.652584] alloc kstat_irqs on node -1 [ 1.652589] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X [ 1.652593] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.652645] alloc irq_desc for 26 on node -1 [ 1.652646] alloc kstat_irqs on node -1 [ 1.652650] pcieport 0000:00:07.0: irq 26 for MSI/MSI-X [ 1.652653] pcieport 0000:00:07.0: setting latency timer to 64 [ 1.652690] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.652759] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.652867] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.652940] ACPI: Power Button [PWRB] [ 1.653015] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.653079] ACPI: Power Button [PWRF] [ 1.653348] processor LNXCPU:00: registered as cooling_device0 [ 1.653421] processor LNXCPU:01: registered as cooling_device1 [ 1.654409] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 1.654560] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.654700] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node f701a660), AE_NOT_EXIST [ 1.654893] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node f701a660), AE_NOT_EXIST [ 1.655083] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 1.655223] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.655362] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node f701a708), AE_NOT_EXIST [ 1.655554] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node f701a708), AE_NOT_EXIST [ 1.655747] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 1.655888] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.656032] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node f701a870), AE_NOT_EXIST [ 1.656225] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node f701a870), AE_NOT_EXIST [ 1.656413] ACPI Error: No handler for Region [SACS] (f711e5f0) [PCI_Config] (20090903/evregion-319) [ 1.656554] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.656693] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node f701a918), AE_NOT_EXIST [ 1.656886] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node f701a918), AE_NOT_EXIST [ 1.657327] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.657386] ACPI: Thermal Zone [THRM] (35 C) [ 1.657494] isapnp: Scanning for PnP cards... [ 1.658249] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.659036] brd: module loaded [ 1.659343] loop: module loaded [ 1.659437] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.659584] alloc irq_desc for 16 on node -1 [ 1.659585] alloc kstat_irqs on node -1 [ 1.659589] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.659672] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 1.659848] Fixed MDIO Bus: probed [ 1.659922] PPP generic driver version 2.4.2 [ 1.659992] tun: Universal TUN/TAP device driver, 1.6 [ 1.660052] tun: (C) 1999-2004 Max Krasnyansky [ 1.660148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.660219] alloc irq_desc for 17 on node -1 [ 1.660220] alloc kstat_irqs on node -1 [ 1.660222] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.660285] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.660353] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.660432] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.660506] ehci_hcd 0000:00:12.2: debug port 1 [ 1.660574] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfcfff000 [ 1.676021] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.676134] usb usb1: configuration #1 chosen from 1 choice [ 1.676209] hub 1-0:1.0: USB hub found [ 1.676263] hub 1-0:1.0: 6 ports detected [ 1.676358] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.676420] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.676490] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.676567] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.676641] ehci_hcd 0000:00:13.2: debug port 1 [ 1.676707] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfcffa800 [ 1.692019] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.692129] usb usb2: configuration #1 chosen from 1 choice [ 1.692199] hub 2-0:1.0: USB hub found [ 1.692254] hub 2-0:1.0: 6 ports detected [ 1.692342] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.692404] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.692467] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.692540] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.692622] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfcffe000 [ 1.756055] usb usb3: configuration #1 chosen from 1 choice [ 1.756124] hub 3-0:1.0: USB hub found [ 1.756182] hub 3-0:1.0: 3 ports detected [ 1.756265] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.756328] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.756397] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.756471] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfcffd000 [ 1.820056] usb usb4: configuration #1 chosen from 1 choice [ 1.820123] hub 4-0:1.0: USB hub found [ 1.820180] hub 4-0:1.0: 3 ports detected [ 1.820263] alloc irq_desc for 18 on node -1 [ 1.820264] alloc kstat_irqs on node -1 [ 1.820267] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.820333] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.820404] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.820484] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfcffc000 [ 1.884051] usb usb5: configuration #1 chosen from 1 choice [ 1.884118] hub 5-0:1.0: USB hub found [ 1.884175] hub 5-0:1.0: 3 ports detected [ 1.884258] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.884319] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.884390] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.884465] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfcffb000 [ 1.948052] usb usb6: configuration #1 chosen from 1 choice [ 1.948119] hub 6-0:1.0: USB hub found [ 1.948176] hub 6-0:1.0: 3 ports detected [ 1.948260] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.948324] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.948394] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.948468] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfcff9000 [ 2.012051] usb usb7: configuration #1 chosen from 1 choice [ 2.012119] hub 7-0:1.0: USB hub found [ 2.012177] hub 7-0:1.0: 2 ports detected [ 2.012260] uhci_hcd: USB Universal Host Controller Interface driver [ 2.012355] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.012417] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.012595] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.012700] mice: PS/2 mouse device common for all mice [ 2.012826] rtc_cmos 00:03: RTC can wake from S4 [ 2.012899] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.012973] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.013086] device-mapper: uevent: version 1.0.3 [ 2.013194] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.013297] device-mapper: multipath: version 1.1.0 loaded [ 2.013350] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.013468] EISA: Probing bus 0 at eisa.0 [ 2.013549] Cannot allocate resource for EISA slot 8 [ 2.013603] EISA: Detected 0 cards. [ 2.013694] cpuidle: using governor ladder [ 2.013748] cpuidle: using governor menu [ 2.014053] TCP cubic registered [ 2.014192] NET: Registered protocol family 10 [ 2.014355] isapnp: No Plug & Play device found [ 2.014528] lo: Disabled Privacy Extensions [ 2.014782] NET: Registered protocol family 17 [ 2.014862] powernow-k8: Found 1 AMD Phenom(tm) II X2 550 Processor processors (2 cpu cores) (version 2.20.00) [ 2.014931] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 2.014932] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 2.015057] Using IPI No-Shortcut mode [ 2.015144] PM: Resume from disk failed. [ 2.015150] registered taskstats version 1 [ 2.015459] Magic number: 10:571:907 [ 2.015556] rtc_cmos 00:03: setting system clock to 2010-09-25 22:53:35 UTC (1285455215) [ 2.017611] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.017664] EDD information not available. [ 2.017755] Freeing unused kernel memory: 656k freed [ 2.018035] Write protecting the kernel text: 4676k [ 2.018108] Write protecting the kernel read-only data: 1840k [ 2.030152] udev: starting version 151 [ 2.030293] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.040043] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 2.073169] scsi0 : pata_atiixp [ 2.076541] scsi1 : pata_atiixp [ 2.077511] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.077570] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.080910] ahci 0000:00:11.0: version 3.0 [ 2.080928] alloc irq_desc for 22 on node -1 [ 2.080929] alloc kstat_irqs on node -1 [ 2.080934] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.081082] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.081148] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.081437] Linux agpgart interface v0.103 [ 2.089615] scsi2 : ahci [ 2.094565] Floppy drive(s): fd0 is 1.44M [ 2.097694] scsi3 : ahci [ 2.098547] scsi4 : ahci [ 2.098666] scsi5 : ahci [ 2.098748] ata3: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 [ 2.098814] ata4: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfff980 irq 22 [ 2.098878] ata5: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfffa00 irq 22 [ 2.098943] ata6: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfffa80 irq 22 [ 2.111787] FDC 0 is a post-1991 82077 [ 2.181553] usb 1-4: configuration #1 chosen from 1 choice [ 2.186002] Initializing USB Mass Storage driver... [ 2.186117] scsi6 : SCSI emulation for USB Mass Storage devices [ 2.186227] usbcore: registered new interface driver usb-storage [ 2.186281] USB Mass Storage support registered. [ 2.186335] usb-storage: device found at 3 [ 2.186336] usb-storage: waiting for device to settle before scanning [ 2.416047] ata5: SATA link down (SStatus 0 SControl 300) [ 2.416077] ata6: SATA link down (SStatus 0 SControl 300) [ 2.444019] usb 3-3: new low speed USB device using ohci_hcd and address 2 [ 2.580023] ata4: softreset failed (device not ready) [ 2.580077] ata4: applying SB600 PMP SRST workaround and retrying [ 2.621945] usb 3-3: configuration #1 chosen from 1 choice [ 2.744031] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.757143] ata4.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L05, max UDMA/100, ATAPI AN [ 2.770628] ata4.00: configured for UDMA/100 [ 2.984022] ata3: softreset failed (device not ready) [ 2.984076] ata3: applying SB600 PMP SRST workaround and retrying [ 3.148031] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.149095] ata3.00: ATA-8: ST3500418AS, CC38, max UDMA/133 [ 3.149150] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.150381] ata3.00: configured for UDMA/133 [ 3.164094] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 [ 3.164252] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.164262] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.164285] sd 2:0:0:0: [sda] Write Protect is off [ 3.164287] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.164323] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.164396] sda: sda1 sda2 [ 3.165663] scsi 3:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L05 PQ: 0 ANSI: 5 [ 3.165774] sda3 [ 3.166013] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.169956] sr0: scsi3-mmc drive: 8x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.170022] Uniform CD-ROM driver Revision: 3.20 [ 3.170127] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.170159] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 3.171912] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.171981] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.172058] r8169 0000:02:00.0: setting latency timer to 64 [ 3.172087] alloc irq_desc for 27 on node -1 [ 3.172089] alloc kstat_irqs on node -1 [ 3.172098] r8169 0000:02:00.0: irq 27 for MSI/MSI-X [ 3.172494] eth0: RTL8168d/8111d at 0xf813e000, 00:30:67:15:5b:7b, XID 081000c0 IRQ 27 [ 3.174656] usbcore: registered new interface driver hiddev [ 3.189455] [drm] Initialized drm 1.1.0 20060810 [ 3.197996] input: Microsoft Microsoft Trackball Explorer® as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input4 [ 3.198116] generic-usb 0003:045E:0024.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Explorer®] on usb-0000:00:12.0-3/input0 [ 3.198201] usbcore: registered new interface driver usbhid [ 3.198256] usbhid: v2.6:USB HID core driver [ 3.210155] nouveau 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.210218] nouveau 0000:01:00.0: setting latency timer to 64 [ 3.211454] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a3180a2) [ 3.212078] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 3.317758] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 3.317812] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 3.317864] [drm] nouveau 0000:01:00.0: Bios version 70.15.27.00 [ 3.317917] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid [ 3.317971] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 3.318035] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 3.318099] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 3.318154] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 3.318217] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [ 3.318280] [drm] nouveau 0000:01:00.0: 2: 0x00002261: type 0x61 idx 2 tag 0x08 [ 3.318344] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00020030 [ 3.318398] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000000 [ 3.318451] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011310 00000000 [ 3.318505] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02022362 00020010 [ 3.318563] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x655B [ 3.360018] [drm] nouveau 0000:01:00.0: 0x68BD: Condition still not met after 20ms, skipping following opcodes [ 3.384017] [drm] nouveau 0000:01:00.0: 0x68C1: Condition still not met after 20ms, skipping following opcodes [ 3.384106] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x6AD2 [ 3.408016] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x7F25 [ 3.408089] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x7F63 [ 3.457545] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8169 [ 3.457610] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x81CE [ 3.480017] [drm] nouveau 0000:01:00.0: 0x81CE: Condition still not met after 20ms, skipping following opcodes [ 3.480092] [drm] nouveau 0000:01:00.0: 0x5402: parsing output script 0 [ 3.480146] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table [ 3.480209] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table [ 3.480273] [drm] nouveau 0000:01:00.0: 0x5402: parsing output script 0 [ 3.639327] [TTM] Zone kernel: Available graphics memory: 429372 kiB. [ 3.639381] [TTM] Zone highmem: Available graphics memory: 1612960 kiB. [ 3.639438] [drm] nouveau 0000:01:00.0: 512 MiB VRAM [ 3.651325] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 3.652472] [drm] nouveau 0000:01:00.0: I don't know how to make a ctxprog for your NVa3 card. [ 3.652540] [drm] nouveau 0000:01:00.0: Disabling acceleration. Please contact the devs. [ 3.653043] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 3.653100] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 3.653152] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 3.653204] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 3.653258] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 3.653356] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 3.653431] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [ 3.931743] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x401c0000, bo f6511c00 [ 3.931855] fb0: nouveaufb frame buffer device [ 3.931918] registered panic notifier [ 3.931974] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 3.933132] vga16fb: initializing [ 3.933134] vga16fb: mapped to 0xc00a0000 [ 3.933194] vga16fb: not registering due to another framebuffer present [ 3.939542] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table [ 3.939549] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table [ 3.939553] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table [ 3.939805] [drm] nouveau 0000:01:00.0: Couldn't find matching output script table [ 3.942485] Console: switching to colour frame buffer device 160x64 [ 4.527005] xor: automatically using best checksumming function: pIII_sse [ 4.544507] pIII_sse : 12447.000 MB/sec [ 4.544509] xor: using function: pIII_sse (12447.000 MB/sec) [ 4.546179] device-mapper: dm-raid45: initialized v0.2594b [ 7.184293] usb-storage: device scan complete [ 7.185280] scsi 6:0:0:0: Direct-Access Geek Squad PMAP PQ: 0 ANSI: 0 CCS [ 7.185584] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 7.186394] sd 6:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 7.186891] sd 6:0:0:0: [sdb] Write Protect is off [ 7.186893] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 7.186894] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.188890] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.188892] sdb: sdb1 [ 7.190889] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.190892] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 9.013190] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 9.036307] ISOFS: changing to secondary root [ 10.295219] aufs 2-standalone.tree-20091207 [ 10.303227] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 11.176026] end_request: I/O error, dev fd0, sector 0 [ 11.200529] end_request: I/O error, dev fd0, sector 0 [ 15.318707] aufs test_add:243:exe[861]: uid/gid/perm //filesystem.squashfs 0/0/0755, 0/0/0777 [ 15.364530] end_request: I/O error, dev fd0, sector 0 [ 15.388529] end_request: I/O error, dev fd0, sector 0 [ 16.936530] end_request: I/O error, dev fd0, sector 0 [ 17.772529] end_request: I/O error, dev fd0, sector 0 [ 17.796529] end_request: I/O error, dev fd0, sector 0 [ 18.084529] end_request: I/O error, dev fd0, sector 0 [ 18.328523] end_request: I/O error, dev fd0, sector 0 [ 18.356529] end_request: I/O error, dev fd0, sector 0 [ 112.023278] udev: starting version 151 [ 112.173733] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 112.173735] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 112.268918] cfg80211: Calling CRDA to update world regulatory domain [ 112.442408] alloc irq_desc for 20 on node -1 [ 112.442410] alloc kstat_irqs on node -1 [ 112.442415] rt61pci 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 112.485898] cfg80211: World regulatory domain updated: [ 112.485900] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 112.485903] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 112.485905] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 112.485906] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 112.485908] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 112.485910] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 112.559372] phy0: Selected rate control algorithm 'minstrel' [ 112.559837] Registered led device: rt61pci-phy0::radio [ 112.559847] Registered led device: rt61pci-phy0::assoc [ 112.668625] r8169: eth0: link up [ 112.668630] r8169: eth0: link up [ 112.669817] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 112.670366] rt61pci 0000:03:05.0: firmware: requesting rt2561s.bin [ 112.756277] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 112.765877] hda_codec: ALC888: BIOS auto-probing. [ 112.767258] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5 [ 112.778361] HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 112.778364] hda_intel: Disable MSI for Nvidia chipset [ 112.778384] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 113.329810] lp: driver loaded but no devices found [ 113.351920] ppdev: user-space parallel port driver [ 114.724340] CPU0 attaching NULL sched-domain. [ 114.724344] CPU1 attaching NULL sched-domain. [ 114.744141] CPU0 attaching sched-domain: [ 114.744144] domain 0: span 0-1 level MC [ 114.744146] groups: 0 1 [ 114.744150] CPU1 attaching sched-domain: [ 114.744151] domain 0: span 0-1 level MC [ 114.744153] groups: 1 0 [ 117.240526] end_request: I/O error, dev fd0, sector 0 [ 117.268526] end_request: I/O error, dev fd0, sector 0 [ 122.788014] eth0: no IPv6 routers present [ 218.963585] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 218.986785] ISOFS: changing to secondary root