[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz splash -- BOOT_IMAGE=/casper/vmlinuz [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000023c000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x23c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 23C000000 mask FFC000000 uncachable [ 0.000000] 1 base 000000000 mask E00000000 write-back [ 0.000000] 2 base 200000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] modified: 00000000bffb0000 - 00000000bffbe000 (ACPI data) [ 0.000000] modified: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] modified: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 000000023c000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bffb0000 page 4k [ 0.000000] kernel direct mapping tables up to bffb0000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-000000023c000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 023c000000 page 2M [ 0.000000] kernel direct mapping tables up to 23c000000 @ b000-15000 [ 0.000000] RAMDISK: 7f69d000 - 7fffede7 [ 0.000000] ACPI: RSDP 00000000000fa0a0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bffb0000 00044 (v01 LENOVO TC-03 20081222 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bffb0200 00084 (v02 LENOVO TC-03 20081222 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bffb05c0 0551B (v01 LENOVO TC-03 0000045A INTL 20051117) [ 0.000000] ACPI: FACS 00000000bffbe000 00040 [ 0.000000] ACPI: APIC 00000000bffb0390 0006C (v01 LENOVO APIC1026 20081222 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bffb0400 0003C (v01 LENOVO OEMMCFG 20081222 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000bffb0440 00176 (v01 LENOVO TC-03 20081222 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bffbe040 00061 (v01 LENOVO OEMB1026 20081222 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bffb5ae0 00038 (v01 LENOVO OEMHPET 20081222 MSFT 00000097) [ 0.000000] ACPI: GSCI 00000000bffbe0b0 02024 (v01 LENOVO GMCHSCI 20081222 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bffc08e0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000023c000000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000023c000000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000014fff] [ 0.000000] bootmap [0000000000015000 - 000000000005c7ff] pages 48 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 023c000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [007f69d000 - 007fffede7] RAMDISK ==> [007f69d000 - 007fffede7] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a3011b] BRK ==> [0001a30000 - 0001a3011b] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0023c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffb0 [ 0.000000] 0: 0x00100000 -> 0x0023c000 [ 0.000000] On node 0 totalpages: 2080586 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3831 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767976 pages, LIFO batch:31 [ 0.000000] Normal zone: 17696 pages used for memmap [ 0.000000] Normal zone: 1276640 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffbe000 [ 0.000000] PM: Registered nosave memory: 00000000bffbe000 - 00000000bfff0000 [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2048447 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz splash -- BOOT_IMAGE=/casper/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 8120832k/9371648k available (5422k kernel code, 1049304k absent, 201512k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2327.194 MHz processor. [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4654.38 BogoMIPS (lpj=23271940) [ 0.010131] Security Framework initialized [ 0.010197] AppArmor: AppArmor initialized [ 0.010906] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.014416] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.016008] Mount-cache hash table entries: 256 [ 0.016196] Initializing cgroup subsys ns [ 0.016250] Initializing cgroup subsys cpuacct [ 0.016303] Initializing cgroup subsys memory [ 0.016359] Initializing cgroup subsys devices [ 0.016410] Initializing cgroup subsys freezer [ 0.016458] Initializing cgroup subsys net_cls [ 0.016525] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.016615] CPU: L2 cache: 2048K [ 0.016666] CPU 0/0x0 -> Node 0 [ 0.016715] CPU: Physical Processor ID: 0 [ 0.016766] CPU: Processor Core ID: 0 [ 0.016817] mce: CPU supports 6 MCE banks [ 0.016874] CPU0: Thermal monitoring enabled (TM2) [ 0.016926] using mwait in idle threads. [ 0.016975] Performance Events: Core2 events, Intel PMU driver. [ 0.017108] ... version: 2 [ 0.017159] ... bit width: 40 [ 0.017208] ... generic registers: 2 [ 0.017258] ... value mask: 000000ffffffffff [ 0.017310] ... max period: 000000007fffffff [ 0.017359] ... fixed-purpose events: 3 [ 0.017408] ... event mask: 0000000700000003 [ 0.022152] ACPI: Core revision 20090903 [ 0.030008] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030063] ftrace: allocating 22527 entries in 89 pages [ 0.040052] Setting APIC routing to flat [ 0.040448] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.141680] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 2048K [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] CPU1: Thermal monitoring enabled (TM2) [ 0.300117] CPU1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a [ 0.301454] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.310097] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.020000] Initializing CPU#2 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 2048K [ 0.020000] CPU 2/0x2 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 2 [ 0.020000] CPU2: Thermal monitoring enabled (TM2) [ 0.470101] CPU2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a [ 0.470569] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.480073] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.020000] Initializing CPU#3 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 2048K [ 0.020000] CPU 3/0x3 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 3 [ 0.020000] CPU3: Thermal monitoring enabled (TM2) [ 0.640032] CPU3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 0a [ 0.640497] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.650011] Brought up 4 CPUs [ 0.650066] Total of 4 processors activated (18515.60 BogoMIPS). [ 0.651411] CPU0 attaching sched-domain: [ 0.651414] domain 0: span 0-1 level MC [ 0.651417] groups: 0 1 [ 0.651420] domain 1: span 0-3 level CPU [ 0.651422] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048) [ 0.651430] CPU1 attaching sched-domain: [ 0.651431] domain 0: span 0-1 level MC [ 0.651433] groups: 1 0 [ 0.651436] domain 1: span 0-3 level CPU [ 0.651438] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048) [ 0.651443] CPU2 attaching sched-domain: [ 0.651445] domain 0: span 2-3 level MC [ 0.651447] groups: 2 3 [ 0.651449] domain 1: span 0-3 level CPU [ 0.651451] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048) [ 0.651456] CPU3 attaching sched-domain: [ 0.651458] domain 0: span 2-3 level MC [ 0.651460] groups: 3 2 [ 0.651463] domain 1: span 0-3 level CPU [ 0.651465] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048) [ 0.651614] devtmpfs: initialized [ 0.651614] regulator: core version 0.5 [ 0.651614] Time: 14:05:19 Date: 09/24/10 [ 0.651614] NET: Registered protocol family 16 [ 0.651614] Trying to unpack rootfs image as initramfs... [ 0.651614] ACPI: bus type pci registered [ 0.651614] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.651614] PCI: Not using MMCONFIG. [ 0.651614] PCI: Using configuration type 1 for base access [ 0.651614] bio: create slab at 0 [ 0.651614] ACPI: EC: Look up EC in DSDT [ 0.653315] ACPI: Executed 1 blocks of module-level executable AML code [ 0.662861] ACPI: Interpreter enabled [ 0.662914] ACPI: (supports S0 S3 S4 S5) [ 0.663128] ACPI: Using IOAPIC for interrupt routing [ 0.663224] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.666076] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.672447] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.680179] ACPI: No dock devices found. [ 0.680461] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.680604] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.680658] pci 0000:00:01.0: PME# disabled [ 0.680731] pci 0000:00:03.0: reg 10 64bit mmio: [0xf9fffc00-0xf9fffc0f] [ 0.680754] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.680806] pci 0000:00:03.0: PME# disabled [ 0.680918] pci 0000:00:19.0: reg 10 32bit mmio: [0xf9fc0000-0xf9fdffff] [ 0.680925] pci 0000:00:19.0: reg 14 32bit mmio: [0xf9ffe000-0xf9ffefff] [ 0.680931] pci 0000:00:19.0: reg 18 io port: [0xcc00-0xcc1f] [ 0.680971] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.681025] pci 0000:00:19.0: PME# disabled [ 0.681149] pci 0000:00:1a.0: reg 20 io port: [0xc880-0xc89f] [ 0.681279] pci 0000:00:1a.1: reg 20 io port: [0xc800-0xc81f] [ 0.681384] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff] [ 0.681451] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.681506] pci 0000:00:1a.7: PME# disabled [ 0.681618] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.681673] pci 0000:00:1c.0: PME# disabled [ 0.681781] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.681836] pci 0000:00:1c.1: PME# disabled [ 0.681967] pci 0000:00:1d.0: reg 20 io port: [0xc480-0xc49f] [ 0.682104] pci 0000:00:1d.1: reg 20 io port: [0xc400-0xc41f] [ 0.682229] pci 0000:00:1d.2: reg 20 io port: [0xc080-0xc09f] [ 0.682332] pci 0000:00:1d.3: reg 20 io port: [0xc000-0xc01f] [ 0.682426] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff400-0xf9fff7ff] [ 0.682493] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.682548] pci 0000:00:1d.7: PME# disabled [ 0.682727] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.682789] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.682843] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.682956] pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07] [ 0.682961] pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883] [ 0.682966] pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807] [ 0.682971] pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483] [ 0.682977] pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb40f] [ 0.682982] pci 0000:00:1f.2: reg 24 io port: [0xb080-0xb08f] [ 0.683027] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff000-0xf9fff0ff] [ 0.683041] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.683084] pci 0000:00:1f.5: reg 10 io port: [0xac00-0xac07] [ 0.683089] pci 0000:00:1f.5: reg 14 io port: [0xa880-0xa883] [ 0.683094] pci 0000:00:1f.5: reg 18 io port: [0xa800-0xa807] [ 0.683099] pci 0000:00:1f.5: reg 1c io port: [0xa480-0xa483] [ 0.683104] pci 0000:00:1f.5: reg 20 io port: [0xa400-0xa40f] [ 0.683109] pci 0000:00:1f.5: reg 24 io port: [0xa080-0xa08f] [ 0.683172] pci 0000:00:1f.6: reg 10 64bit mmio: [0xfed08000-0xfed08fff] [ 0.683253] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.683261] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.683269] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.683274] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f] [ 0.683278] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff] [ 0.683333] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.683336] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfeafffff] [ 0.683340] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.683383] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff] [ 0.683439] pci 0000:03:00.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff] [ 0.683505] pci 0000:03:00.0: supports D1 D2 [ 0.683506] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.683562] pci 0000:03:00.0: PME# disabled [ 0.683670] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.683726] pci 0000:04:0a.0: reg 10 io port: [0xec00-0xec1f] [ 0.683782] pci 0000:04:0a.0: supports D1 D2 [ 0.683819] pci 0000:00:1e.0: transparent bridge [ 0.683872] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.683895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.684012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.684110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.684157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.698534] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.699146] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.699754] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.700406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.701005] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.701610] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.702206] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.702808] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.703412] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.703476] vgaarb: loaded [ 0.703620] SCSI subsystem initialized [ 0.703703] libata version 3.00 loaded. [ 0.703703] usbcore: registered new interface driver usbfs [ 0.703703] usbcore: registered new interface driver hub [ 0.703703] usbcore: registered new device driver usb [ 0.703703] ACPI: WMI: Mapper loaded [ 0.703703] PCI: Using ACPI for IRQ routing [ 0.703703] NetLabel: Initializing [ 0.703703] NetLabel: domain hash size = 128 [ 0.703703] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.703703] NetLabel: unlabeled traffic allowed by default [ 0.703703] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.703703] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 2.267999] Switching to clocksource tsc [ 2.268015] AppArmor: AppArmor Filesystem Enabled [ 2.268015] pnp: PnP ACPI init [ 2.268015] ACPI: bus type pnp registered [ 2.268015] pnp: PnP ACPI: found 13 devices [ 2.268015] ACPI: ACPI bus type pnp unregistered [ 2.268015] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 2.268015] system 00:07: ioport range 0xa00-0xa7f has been reserved [ 2.268015] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 2.268015] system 00:08: ioport range 0x800-0x87f has been reserved [ 2.268015] system 00:08: ioport range 0x480-0x4bf has been reserved [ 2.268015] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 2.268015] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved [ 2.268015] system 00:08: iomem range 0xffe79000-0xffe79c00 has been reserved [ 2.268015] system 00:08: iomem range 0xfff00400-0xffffffff has been reserved [ 2.268015] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 2.268015] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 2.268015] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 2.268015] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 2.268015] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 2.268015] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 2.268015] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved [ 2.271523] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 2.271580] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 2.271636] pci 0000:00:01.0: MEM window: 0xfa000000-0xfeafffff [ 2.271691] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 2.271696] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 2.271696] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 2.271696] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc03fffff [ 2.271696] pci 0000:00:1c.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff [ 2.271696] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 2.271696] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 2.271696] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff [ 2.271696] pci 0000:00:1c.1: PREFETCH window: 0x000000c0400000-0x000000c05fffff [ 2.271696] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 2.271696] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 2.271696] pci 0000:00:1e.0: MEM window: disabled [ 2.271696] pci 0000:00:1e.0: PREFETCH window: disabled [ 2.271696] alloc irq_desc for 16 on node -1 [ 2.271696] alloc kstat_irqs on node -1 [ 2.271696] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.271696] pci 0000:00:01.0: setting latency timer to 64 [ 2.271696] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 2.271696] alloc irq_desc for 17 on node -1 [ 2.271696] alloc kstat_irqs on node -1 [ 2.271696] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.271696] pci 0000:00:1c.0: setting latency timer to 64 [ 2.271696] pci 0000:00:1c.1: enabling device (0106 -> 0107) [ 2.271696] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 2.271696] pci 0000:00:1c.1: setting latency timer to 64 [ 2.271696] pci 0000:00:1e.0: setting latency timer to 64 [ 2.271696] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 2.271696] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 2.271696] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 2.271696] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfeafffff] [ 2.271696] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 2.271696] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 2.271696] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc03fffff] [ 2.271696] pci_bus 0000:02: resource 2 pref mem [0xf8f00000-0xf8ffffff] [ 2.271696] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] [ 2.271696] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 2.271696] pci_bus 0000:03: resource 2 pref mem [0xc0400000-0xc05fffff] [ 2.271696] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] [ 2.271696] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 2.271696] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 2.271696] NET: Registered protocol family 2 [ 2.271696] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 2.274931] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.280221] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.280960] TCP: Hash tables configured (established 524288 bind 65536) [ 2.281018] TCP reno registered [ 2.281222] NET: Registered protocol family 1 [ 2.281489] pci 0000:01:00.0: Boot video device [ 2.281820] Scanning for low memory corruption every 60 seconds [ 2.282026] audit: initializing netlink socket (disabled) [ 2.282087] type=2000 audit(1285337120.280:1): initialized [ 2.291163] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.292691] VFS: Disk quotas dquot_6.5.2 [ 2.292802] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.293451] fuse init (API version 7.13) [ 2.293579] msgmni has been set to 15861 [ 2.294032] alg: No test for stdrng (krng) [ 2.294152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.294215] io scheduler noop registered [ 2.294263] io scheduler anticipatory registered [ 2.294314] io scheduler deadline registered [ 2.294396] io scheduler cfq registered (default) [ 2.294587] alloc irq_desc for 24 on node -1 [ 2.294590] alloc kstat_irqs on node -1 [ 2.294597] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 2.294602] pcieport 0000:00:01.0: setting latency timer to 64 [ 2.294714] alloc irq_desc for 25 on node -1 [ 2.294716] alloc kstat_irqs on node -1 [ 2.294723] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 2.294733] pcieport 0000:00:1c.0: setting latency timer to 64 [ 2.294867] alloc irq_desc for 26 on node -1 [ 2.294868] alloc kstat_irqs on node -1 [ 2.294877] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 2.294887] pcieport 0000:00:1c.1: setting latency timer to 64 [ 2.294978] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.295055] Firmware did not grant requested _OSC control [ 2.295073] Firmware did not grant requested _OSC control [ 2.295099] Firmware did not grant requested _OSC control [ 2.295109] Firmware did not grant requested _OSC control [ 2.295121] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.295279] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.295348] ACPI: Power Button [PWRB] [ 2.295442] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.295502] ACPI: Power Button [PWRF] [ 2.296259] ACPI: SSDT 00000000bffc00e0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 2.296682] processor LNXCPU:00: registered as cooling_device0 [ 2.297125] ACPI: SSDT 00000000bffc02e0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117) [ 2.297532] processor LNXCPU:01: registered as cooling_device1 [ 2.298023] ACPI: SSDT 00000000bffc04e0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117) [ 2.298419] processor LNXCPU:02: registered as cooling_device2 [ 2.298824] ACPI: SSDT 00000000bffc06e0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117) [ 2.300034] processor LNXCPU:03: registered as cooling_device3 [ 2.304093] Linux agpgart interface v0.103 [ 2.304167] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.305302] brd: module loaded [ 2.305749] loop: module loaded [ 2.305864] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.306000] ata_piix 0000:00:1f.2: version 2.13 [ 2.306015] alloc irq_desc for 19 on node -1 [ 2.306017] alloc kstat_irqs on node -1 [ 2.306023] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.306074] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 2.306320] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.306395] scsi0 : ata_piix [ 2.306522] scsi1 : ata_piix [ 2.307868] ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19 [ 2.307921] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19 [ 2.308001] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.308070] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 2.308349] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 2.308398] scsi2 : ata_piix [ 2.308512] scsi3 : ata_piix [ 2.309714] ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19 [ 2.309765] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19 [ 2.310161] Fixed MDIO Bus: probed [ 2.310232] PPP generic driver version 2.4.2 [ 2.310314] tun: Universal TUN/TAP device driver, 1.6 [ 2.310360] tun: (C) 1999-2004 Max Krasnyansky [ 2.310484] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.310546] alloc irq_desc for 18 on node -1 [ 2.310547] alloc kstat_irqs on node -1 [ 2.310552] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.310633] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.310637] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.310707] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.310783] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.314700] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2.314716] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fff800 [ 2.333761] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.333917] usb usb1: configuration #1 chosen from 1 choice [ 2.333987] hub 1-0:1.0: USB hub found [ 2.334036] hub 1-0:1.0: 4 ports detected [ 2.334135] alloc irq_desc for 23 on node -1 [ 2.334137] alloc kstat_irqs on node -1 [ 2.334143] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.334207] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.334210] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.334284] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.334359] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.338293] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.338308] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff400 [ 2.363766] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.363930] usb usb2: configuration #1 chosen from 1 choice [ 2.364000] hub 2-0:1.0: USB hub found [ 2.364050] hub 2-0:1.0: 8 ports detected [ 2.364156] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.364217] uhci_hcd: USB Universal Host Controller Interface driver [ 2.364299] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.364353] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.364356] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.364435] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.364523] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880 [ 2.364641] usb usb3: configuration #1 chosen from 1 choice [ 2.364706] hub 3-0:1.0: USB hub found [ 2.364754] hub 3-0:1.0: 2 ports detected [ 2.364837] alloc irq_desc for 21 on node -1 [ 2.364839] alloc kstat_irqs on node -1 [ 2.364844] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.364895] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.364898] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.364968] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.365050] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800 [ 2.365163] usb usb4: configuration #1 chosen from 1 choice [ 2.365229] hub 4-0:1.0: USB hub found [ 2.365277] hub 4-0:1.0: 2 ports detected [ 2.365358] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.365411] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.365414] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.365486] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.365563] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480 [ 2.365677] usb usb5: configuration #1 chosen from 1 choice [ 2.365744] hub 5-0:1.0: USB hub found [ 2.365792] hub 5-0:1.0: 2 ports detected [ 2.365870] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.365921] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.365924] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.365994] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.366069] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400 [ 2.366184] usb usb6: configuration #1 chosen from 1 choice [ 2.366252] hub 6-0:1.0: USB hub found [ 2.366300] hub 6-0:1.0: 2 ports detected [ 2.366382] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.366433] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.366436] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.366511] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.366587] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080 [ 2.366709] usb usb7: configuration #1 chosen from 1 choice [ 2.366774] hub 7-0:1.0: USB hub found [ 2.366824] hub 7-0:1.0: 2 ports detected [ 2.366906] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2.366957] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.366960] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.367034] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 2.367109] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000 [ 2.367224] usb usb8: configuration #1 chosen from 1 choice [ 2.367288] hub 8-0:1.0: USB hub found [ 2.367336] hub 8-0:1.0: 2 ports detected [ 2.367455] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.367502] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.368041] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.368175] mice: PS/2 mouse device common for all mice [ 2.368317] rtc_cmos 00:03: RTC can wake from S4 [ 2.368398] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.368471] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.368627] device-mapper: uevent: version 1.0.3 [ 2.368765] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.368983] device-mapper: multipath: version 1.1.0 loaded [ 2.369040] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.369418] cpuidle: using governor ladder [ 2.369463] cpuidle: using governor menu [ 2.369805] TCP cubic registered [ 2.369955] NET: Registered protocol family 10 [ 2.370379] lo: Disabled Privacy Extensions [ 2.370672] NET: Registered protocol family 17 [ 2.371674] PM: Resume from disk failed. [ 2.371684] registered taskstats version 1 [ 2.372133] Magic number: 10:818:81 [ 2.372260] rtc_cmos 00:03: setting system clock to 2010-09-24 14:05:20 UTC (1285337120) [ 2.372321] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.372367] EDD information not available. [ 2.389974] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.598255] Freeing initrd memory: 9607k freed [ 2.650025] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 2.661035] ata4: SATA link down (SStatus 0 SControl 300) [ 2.820055] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.840265] ata3.00: ATAPI: HL-DT-STDVD-RAM GH40N, NX04, max UDMA/100 [ 2.880280] ata3.00: configured for UDMA/100 [ 2.990362] usb 1-4: configuration #1 chosen from 1 choice [ 3.160093] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.160118] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.160132] ata1.01: SATA link down (SStatus 0 SControl 300) [ 3.160277] ata2.01: SATA link down (SStatus 0 SControl 300) [ 3.183216] ata2.00: ATA-8: WDC WD10EALS-00Z8A0, 05.01D05, max UDMA/133 [ 3.183265] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.216238] ata1.00: ATA-8: ST31000528AS, CC65, max UDMA/100 [ 3.216286] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.223279] ata2.00: configured for UDMA/133 [ 3.232509] usb 2-3: new high speed USB device using ehci_hcd and address 4 [ 3.286309] ata1.00: configured for UDMA/100 [ 3.286486] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC65 PQ: 0 ANSI: 5 [ 3.286668] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.286684] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.286840] scsi 1:0:0:0: Direct-Access ATA WDC WD10EALS-00Z 05.0 PQ: 0 ANSI: 5 [ 3.286986] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.286998] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.287078] sd 0:0:0:0: [sda] Write Protect is off [ 3.287080] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.287100] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.287213] sda: [ 3.287362] sd 1:0:0:0: [sdb] Write Protect is off [ 3.287447] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.287468] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.287632] sdb: [ 3.290651] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH40N NX04 PQ: 0 ANSI: 5 [ 3.299877] sdb1 [ 3.300151] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.309241] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.309300] Uniform CD-ROM driver Revision: 3.20 [ 3.309423] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.309459] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 3.312690] sda1 sda2 [ 3.312992] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.313073] Freeing unused kernel memory: 880k freed [ 3.313271] Write protecting the kernel read-only data: 7696k [ 3.330293] udev: starting version 151 [ 3.370472] [drm] Initialized drm 1.1.0 20060810 [ 3.372859] Initializing USB Mass Storage driver... [ 3.377046] b43-pci-bridge 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.377122] b43-pci-bridge 0000:03:00.0: setting latency timer to 64 [ 3.380297] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 3.380352] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 3.380453] alloc irq_desc for 20 on node -1 [ 3.380456] alloc kstat_irqs on node -1 [ 3.380462] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.380530] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.380652] alloc irq_desc for 27 on node -1 [ 3.380654] alloc kstat_irqs on node -1 [ 3.380666] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 3.387907] scsi4 : SCSI emulation for USB Mass Storage devices [ 3.388469] usb-storage: device found at 2 [ 3.388472] usb-storage: waiting for device to settle before scanning [ 3.388488] usbcore: registered new interface driver usb-storage [ 3.389403] USB Mass Storage support registered. [ 3.391890] usb 2-3: configuration #1 chosen from 1 choice [ 3.392109] hub 2-3:1.0: USB hub found [ 3.392392] hub 2-3:1.0: 4 ports detected [ 3.403089] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.403143] nouveau 0000:01:00.0: setting latency timer to 64 [ 3.405654] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298000a2) [ 3.406582] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 3.476197] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 3.476246] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 3.476293] [drm] nouveau 0000:01:00.0: Bios version 62.98.20.00 [ 3.476340] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 3.476396] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 3.476453] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 3.476501] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 3.476556] [drm] nouveau 0000:01:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07 [ 3.476612] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 3.476667] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 3.476733] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04000310 00000028 [ 3.476796] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028 [ 3.476848] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011302 00020030 [ 3.476895] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010223f1 00a0c033 [ 3.476947] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD2B4 [ 3.502579] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 3.512522] usb 2-4: new high speed USB device using ehci_hcd and address 5 [ 3.572615] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD628 [ 3.642512] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDECE [ 3.642577] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDFC0 [ 3.662395] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:25:50:85 [ 3.662462] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.662540] 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: ffffff-0ff [ 3.662603] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE18A [ 3.662611] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE1EF [ 3.663543] usb 2-4: configuration #1 chosen from 1 choice [ 3.692510] [drm] nouveau 0000:01:00.0: 0xE1EF: Condition still not met after 20ms, skipping following opcodes [ 3.692574] [drm] nouveau 0000:01:00.0: 0xC2DE: parsing output script 0 [ 3.692623] [drm] nouveau 0000:01:00.0: 0xACB2: parsing output script 0 [ 3.781015] [TTM] Zone kernel: Available graphics memory: 4065660 kiB. [ 3.781062] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 3.781116] [drm] nouveau 0000:01:00.0: 512 MiB VRAM [ 3.795610] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 3.795662] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 3.795887] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 3.799086] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 3.799761] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 3.799817] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 3.799869] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 3.799921] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 3.799982] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 3.800075] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 3.943759] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 4.023805] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x40250000, bo ffff880230d1a800 [ 4.023918] fb0: nouveaufb frame buffer device [ 4.023974] registered panic notifier [ 4.024027] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 4.025467] vga16fb: initializing [ 4.025469] vga16fb: mapped to 0xffff8800000a0000 [ 4.025526] vga16fb: not registering due to another framebuffer present [ 4.031527] [drm] nouveau 0000:01:00.0: 0x1139: parsing clock script 0 [ 4.032340] Console: switching to colour frame buffer device 210x65 [ 4.049003] [drm] nouveau 0000:01:00.0: 0xC2E2: parsing output script 1 [ 4.049044] [drm] nouveau 0000:01:00.0: 0xC2E3: parsing output script 2 [ 4.049064] [drm] nouveau 0000:01:00.0: 0xBFF3: parsing clock script 0 [ 4.049354] [drm] nouveau 0000:01:00.0: 0xB82C: parsing clock script 1 [ 4.120949] usb 5-1: configuration #1 chosen from 1 choice [ 4.131871] usbcore: registered new interface driver hiddev [ 4.410009] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 4.519025] generic-usb 0003:050D:0F51.0001: hiddev96,hidraw0: USB HID v1.00 Device [BELKIN UPS] on usb-0000:00:1d.0-1/input0 [ 4.519066] usbcore: registered new interface driver usbhid [ 4.519075] usbhid: v2.6:USB HID core driver [ 4.585021] usb 5-2: configuration #1 chosen from 1 choice [ 4.601146] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4 [ 4.601250] generic-usb 0003:04B3:310C.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 4.682591] usb 2-3.3: new high speed USB device using ehci_hcd and address 6 [ 4.713643] xor: automatically using best checksumming function: generic_sse [ 4.761253] generic_sse: 8862.800 MB/sec [ 4.761255] xor: using function: generic_sse (8862.800 MB/sec) [ 4.763237] device-mapper: dm-raid45: initialized v0.2594b [ 4.800939] usb 2-3.3: configuration #1 chosen from 1 choice [ 4.801218] scsi5 : SCSI emulation for USB Mass Storage devices [ 4.801298] usb-storage: device found at 6 [ 4.801302] usb-storage: waiting for device to settle before scanning [ 8.380143] usb-storage: device scan complete [ 8.397870] scsi 4:0:0:0: Direct-Access Generic USB CF Reader 0.00 PQ: 0 ANSI: 2 [ 8.415614] scsi 4:0:0:1: Direct-Access Generic USB SM Reader 0.00 PQ: 0 ANSI: 2 [ 8.433367] scsi 4:0:0:2: Direct-Access Generic USB SD Reader 0.00 PQ: 0 ANSI: 2 [ 8.451136] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 0.00 PQ: 0 ANSI: 2 [ 8.451528] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 8.451639] sd 4:0:0:1: Attached scsi generic sg4 type 0 [ 8.451772] sd 4:0:0:2: Attached scsi generic sg5 type 0 [ 8.451869] sd 4:0:0:3: Attached scsi generic sg6 type 0 [ 8.455757] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 8.456515] sd 4:0:0:1: [sdd] Attached SCSI removable disk [ 8.457124] sd 4:0:0:2: [sde] Attached SCSI removable disk [ 8.457742] sd 4:0:0:3: [sdf] Attached SCSI removable disk [ 9.801503] usb-storage: device scan complete [ 9.801890] scsi 5:0:0:0: Direct-Access WDC WD1200BB-00FTA0 15.0 PQ: 0 ANSI: 2 [ 9.802276] sd 5:0:0:0: Attached scsi generic sg7 type 0 [ 9.802890] sd 5:0:0:0: [sdg] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 9.803636] sd 5:0:0:0: [sdg] Write Protect is off [ 9.803640] sd 5:0:0:0: [sdg] Mode Sense: 53 00 00 08 [ 9.803642] sd 5:0:0:0: [sdg] Assuming drive cache: write through [ 9.805001] sd 5:0:0:0: [sdg] Assuming drive cache: write through [ 9.805007] sdg: sdg1 [ 9.821769] sd 5:0:0:0: [sdg] Assuming drive cache: write through [ 9.821773] sd 5:0:0:0: [sdg] Attached SCSI disk [ 11.118047] aufs 2-standalone.tree-20091207 [ 11.128845] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 12.016062] aufs test_add:243:exe[1182]: uid/gid/perm //filesystem.squashfs 0/0/0755, 0/0/0777 [ 25.366344] udev: starting version 151 [ 25.880085] cfg80211: Calling CRDA to update world regulatory domain [ 26.174298] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 26.234477] cfg80211: World regulatory domain updated: [ 26.234481] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.234484] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.234486] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.234489] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.234491] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.234493] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.396208] phy0: Selected rate control algorithm 'minstrel' [ 26.396869] Registered led device: b43-phy0::tx [ 26.396885] Registered led device: b43-phy0::rx [ 26.396901] Registered led device: b43-phy0::radio [ 26.396985] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 26.516787] alloc irq_desc for 22 on node -1 [ 26.516790] alloc kstat_irqs on node -1 [ 26.516797] CA0106 0000:04:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 26.516826] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 26.560217] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 26.620088] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 26.621191] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.750031] b43 ssb0:0: firmware: requesting b43/ucode15.fw [ 26.811777] b43 ssb0:0: firmware: requesting b43-open/ucode15.fw [ 26.854884] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found [ 26.854889] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found [ 26.854891] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 27.021409] b43 ssb0:0: firmware: requesting b43/ucode15.fw [ 27.023038] b43 ssb0:0: firmware: requesting b43-open/ucode15.fw [ 27.024623] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found [ 27.024627] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found [ 27.024629] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.