[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:17:33 UTC 2010 (Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afff0000 (usable) [ 0.000000] BIOS-e820: 00000000afff0000 - 00000000afff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afff3000 - 00000000b0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xafff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000afff0000 (usable) [ 0.000000] modified: 00000000afff0000 - 00000000afff3000 (ACPI NVS) [ 0.000000] modified: 00000000afff3000 - 00000000b0000000 (ACPI data) [ 0.000000] modified: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37800000 - 37fef13a [ 0.000000] Allocated new RAMDISK: 008e2000 - 010d113a [ 0.000000] Move RAMDISK from 0000000037800000 - 0000000037fef139 to 008e2000 - 010d1139 [ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS) [ 0.000000] ACPI: RSDT afff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP afff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT afff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS afff0000 00040 [ 0.000000] ACPI: SSDT afff95c0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET afff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098) [ 0.000000] ACPI: SLIC afff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001) [ 0.000000] ACPI: MCFG afff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC afff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1927MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008de000 - 00008e10e9] BRK ==> [00008de000 - 00008e10e9] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e2000 - 00010d113a] NEW RAMDISK ==> [00008e2000 - 00010d113a] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f3c90] f3c90 [ 0.000000] Reserving 128MB of memory at 32MB for crashkernel (System RAM: 2815MB) [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000afff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000afff0 [ 0.000000] On node 0 totalpages: 720767 [ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map ca000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 3856 pages used for memmap [ 0.000000] HighMem zone: 489698 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @cb800000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 715135 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=0ab0d13a-3e94-4b67-bf81-d16da82ee6f2 ro nomodeset crashkernel=384M-2G:64M,2G-:128M quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 14417280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000afff0) [ 0.000000] Memory: 2697208k/2883520k available (4679k kernel code, 184852k reserved, 2124k data, 660k init, 1974216k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB) [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2008.745 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4017.49 BogoMIPS (lpj=8034980) [ 0.004026] Security Framework initialized [ 0.004052] AppArmor: AppArmor initialized [ 0.004060] Mount-cache hash table entries: 512 [ 0.004211] Initializing cgroup subsys ns [ 0.004215] Initializing cgroup subsys cpuacct [ 0.004220] Initializing cgroup subsys memory [ 0.004228] Initializing cgroup subsys devices [ 0.004230] Initializing cgroup subsys freezer [ 0.004233] Initializing cgroup subsys net_cls [ 0.004255] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004258] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004260] CPU: Physical Processor ID: 0 [ 0.004262] CPU: Processor Core ID: 0 [ 0.004267] mce: CPU supports 5 MCE banks [ 0.004280] using C1E aware idle routine [ 0.004290] Performance Events: AMD PMU driver. [ 0.004298] ... version: 0 [ 0.004299] ... bit width: 48 [ 0.004302] ... generic registers: 4 [ 0.004304] ... value mask: 0000ffffffffffff [ 0.004306] ... max period: 00007fffffffffff [ 0.004308] ... fixed-purpose events: 0 [ 0.004310] ... event mask: 000000000000000f [ 0.004315] Checking 'hlt' instruction... OK. [ 0.022433] ACPI: Core revision 20090903 [ 0.034599] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.034607] ftrace: allocating 21780 entries in 43 pages [ 0.036118] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036588] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.077919] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.164083] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.164114] Brought up 2 CPUs [ 0.164117] Total of 2 processors activated (8035.48 BogoMIPS). [ 0.164333] CPU0 attaching sched-domain: [ 0.164336] domain 0: span 0-1 level MC [ 0.164339] groups: 0 1 [ 0.164346] CPU1 attaching sched-domain: [ 0.164348] domain 0: span 0-1 level MC [ 0.164351] groups: 1 0 [ 0.164444] devtmpfs: initialized [ 0.164444] regulator: core version 0.5 [ 0.164444] Time: 3:50:16 Date: 09/21/10 [ 0.164444] NET: Registered protocol family 16 [ 0.164444] Trying to unpack rootfs image as initramfs... [ 0.164444] EISA bus registered [ 0.164444] ACPI: bus type pci registered [ 0.164444] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.164444] PCI: MCFG area at f0000000 reserved in E820 [ 0.164444] PCI: Using MMCONFIG for extended config space [ 0.164444] PCI: Using configuration type 1 for base access [ 0.168124] bio: create slab at 0 [ 0.169180] ACPI: EC: Look up EC in DSDT [ 0.177300] ACPI: Interpreter enabled [ 0.177306] ACPI: (supports S0 S3 S4 S5) [ 0.177330] ACPI: Using IOAPIC for interrupt routing [ 0.187088] ACPI: No dock devices found. [ 0.188181] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.188403] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f] [ 0.188414] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.188419] pci 0000:00:01.1: reg 24 io port: [0xf400-0xf43f] [ 0.188439] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.188445] pci 0000:00:01.1: PME# disabled [ 0.188495] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.188517] pci 0000:00:02.0: supports D1 D2 [ 0.188520] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.188523] pci 0000:00:02.0: PME# disabled [ 0.188547] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.188573] pci 0000:00:02.1: supports D1 D2 [ 0.188576] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.188579] pci 0000:00:02.1: PME# disabled [ 0.188644] pci 0000:00:05.0: reg 10 32bit mmio: [0xfe028000-0xfe02bfff] [ 0.188671] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.188674] pci 0000:00:05.0: PME# disabled [ 0.188708] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 0.188743] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7] [ 0.188747] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3] [ 0.188751] pci 0000:00:08.0: reg 18 io port: [0x970-0x977] [ 0.188755] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73] [ 0.188759] pci 0000:00:08.0: reg 20 io port: [0xdc00-0xdc0f] [ 0.188764] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.188819] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.188822] pci 0000:00:09.0: PME# disabled [ 0.188860] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.188863] pci 0000:00:0b.0: PME# disabled [ 0.188898] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.188901] pci 0000:00:0c.0: PME# disabled [ 0.188923] pci 0000:00:0d.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.188929] pci 0000:00:0d.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.188934] pci 0000:00:0d.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff] [ 0.188940] pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.189062] pci 0000:01:05.0: reg 10 32bit mmio: [0xfd8ff000-0xfd8fffff] [ 0.189068] pci 0000:01:05.0: reg 14 io port: [0xcc00-0xccff] [ 0.189102] pci 0000:01:05.0: PME# supported from D0 D3hot D3cold [ 0.189106] pci 0000:01:05.0: PME# disabled [ 0.189136] pci 0000:01:09.0: reg 10 32bit mmio: [0xfd8fe000-0xfd8fe7ff] [ 0.189142] pci 0000:01:09.0: reg 14 32bit mmio: [0xfd8f8000-0xfd8fbfff] [ 0.189174] pci 0000:01:09.0: supports D1 D2 [ 0.189176] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot [ 0.189180] pci 0000:01:09.0: PME# disabled [ 0.189205] pci 0000:00:04.0: transparent bridge [ 0.189209] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff] [ 0.189213] pci 0000:00:04.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.189217] pci 0000:00:04.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.189252] pci 0000:00:09.0: bridge io port: [0xb000-0xbfff] [ 0.189256] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.189260] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.189300] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdcfc000-0xfdcfffff] [ 0.189307] pci 0000:03:00.0: reg 18 io port: [0xac00-0xacff] [ 0.189324] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.189350] pci 0000:03:00.0: supports D1 D2 [ 0.189353] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.189357] pci 0000:03:00.0: PME# disabled [ 0.189395] pci 0000:00:0b.0: bridge io port: [0xa000-0xafff] [ 0.189398] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.189402] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.189437] pci 0000:00:0c.0: bridge io port: [0x9000-0x9fff] [ 0.189440] pci 0000:00:0c.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.189444] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.189454] pci_bus 0000:00: on NUMA node 0 [ 0.189459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.189662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.262739] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) [ 0.262897] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.263052] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.263205] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) [ 0.263355] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.263509] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) [ 0.263659] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.263812] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.263965] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 0.264125] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.264280] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.264430] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.264586] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.264737] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.264890] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 0.265044] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.265195] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.265351] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.265503] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.265705] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.265896] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.266086] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.266276] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.266465] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.266660] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.266856] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.267047] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.267242] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.267433] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.267632] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 0.267824] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.268032] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.268226] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.268424] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.268616] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.268811] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.269012] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.269204] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 0.269357] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.269363] vgaarb: loaded [ 0.269492] SCSI subsystem initialized [ 0.269611] libata version 3.00 loaded. [ 0.269685] usbcore: registered new interface driver usbfs [ 0.269702] usbcore: registered new interface driver hub [ 0.269730] usbcore: registered new device driver usb [ 0.269886] ACPI: WMI: Mapper loaded [ 0.269888] PCI: Using ACPI for IRQ routing [ 0.270036] NetLabel: Initializing [ 0.270038] NetLabel: domain hash size = 128 [ 0.270039] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.270054] NetLabel: unlabeled traffic allowed by default [ 0.270095] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.270101] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.276156] Switching to clocksource hpet [ 0.278093] AppArmor: AppArmor Filesystem Enabled [ 0.278120] pnp: PnP ACPI init [ 0.278142] ACPI: bus type pnp registered [ 0.284883] pnp: PnP ACPI: found 14 devices [ 0.284886] ACPI: ACPI bus type pnp unregistered [ 0.284890] PnPBIOS: Disabled by ACPI PNP [ 0.284904] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.284908] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.284911] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.284914] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.284917] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.284921] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.284925] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 0.284929] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 0.284932] system 00:01: iomem range 0xb0000000-0xbfffffff has been reserved [ 0.284938] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.284942] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.284945] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.284953] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.284959] system 00:0d: iomem range 0xd0000-0xd3fff has been reserved [ 0.284962] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 0.284966] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 0.284969] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 0.284973] system 00:0d: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 0.284976] system 00:0d: iomem range 0xafff0000-0xafffffff could not be reserved [ 0.284980] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved [ 0.284983] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.284987] system 00:0d: iomem range 0x100000-0xaffeffff could not be reserved [ 0.284990] system 00:0d: iomem range 0xb0000000-0xbfffffff has been reserved [ 0.284994] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.284997] system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.285001] system 00:0d: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.285004] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.285008] system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.285011] system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.319754] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.319757] pci 0000:00:04.0: IO window: 0xc000-0xcfff [ 0.319761] pci 0000:00:04.0: MEM window: 0xfd800000-0xfd8fffff [ 0.319765] pci 0000:00:04.0: PREFETCH window: 0xfdf00000-0xfdffffff [ 0.319770] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.319773] pci 0000:00:09.0: IO window: 0xb000-0xbfff [ 0.319776] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff [ 0.319780] pci 0000:00:09.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.319784] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.319787] pci 0000:00:0b.0: IO window: 0xa000-0xafff [ 0.319791] pci 0000:00:0b.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.319794] pci 0000:00:0b.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.319798] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.319801] pci 0000:00:0c.0: IO window: 0x9000-0x9fff [ 0.319804] pci 0000:00:0c.0: MEM window: 0xfda00000-0xfdafffff [ 0.319808] pci 0000:00:0c.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.319818] pci 0000:00:04.0: setting latency timer to 64 [ 0.319824] pci 0000:00:09.0: setting latency timer to 64 [ 0.319829] pci 0000:00:0b.0: setting latency timer to 64 [ 0.319834] pci 0000:00:0c.0: setting latency timer to 64 [ 0.319838] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.319841] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.319844] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.319847] pci_bus 0000:01: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.319850] pci_bus 0000:01: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.319853] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.319856] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.319859] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 0.319862] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.319865] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.319868] pci_bus 0000:03: resource 0 io: [0xa000-0xafff] [ 0.319871] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.319874] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.319877] pci_bus 0000:04: resource 0 io: [0x9000-0x9fff] [ 0.319879] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.319882] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.319927] NET: Registered protocol family 2 [ 0.320046] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.320477] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.321570] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.322153] TCP: Hash tables configured (established 131072 bind 65536) [ 0.322157] TCP reno registered [ 0.322295] NET: Registered protocol family 1 [ 0.336081] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336130] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336187] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336245] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336307] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336373] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336380] pci 0000:00:0d.0: Boot video device [ 0.336612] cpufreq-nforce2: No nForce2 chipset. [ 0.336643] Scanning for low memory corruption every 60 seconds [ 0.336756] audit: initializing netlink socket (disabled) [ 0.336769] type=2000 audit(1285041015.336:1): initialized [ 0.347037] highmem bounce pool size: 64 pages [ 0.347043] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.348556] VFS: Disk quotas dquot_6.5.2 [ 0.348613] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.349198] fuse init (API version 7.13) [ 0.349282] msgmni has been set to 1414 [ 0.349528] alg: No test for stdrng (krng) [ 0.349586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.349590] io scheduler noop registered [ 0.349592] io scheduler anticipatory registered [ 0.349594] io scheduler deadline registered [ 0.349637] io scheduler cfq registered (default) [ 0.349778] alloc irq_desc for 24 on node -1 [ 0.349780] alloc kstat_irqs on node -1 [ 0.349791] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X [ 0.349797] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.349866] alloc irq_desc for 25 on node -1 [ 0.349868] alloc kstat_irqs on node -1 [ 0.349874] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X [ 0.349878] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.349947] alloc irq_desc for 26 on node -1 [ 0.349949] alloc kstat_irqs on node -1 [ 0.349954] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X [ 0.349958] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.350013] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.350039] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.350164] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.350168] ACPI: Power Button [PWRB] [ 0.350238] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.350241] ACPI: Power Button [PWRF] [ 0.350300] fan PNP0C0B:00: registered as cooling_device0 [ 0.350306] ACPI: Fan [FAN] (on) [ 0.350760] processor LNXCPU:00: registered as cooling_device1 [ 0.350792] processor LNXCPU:01: registered as cooling_device2 [ 0.356083] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.356090] ACPI: Thermal Zone [THRM] (40 C) [ 0.357731] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.357838] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.357931] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.358219] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.358344] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.358782] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 0.358788] alloc irq_desc for 16 on node -1 [ 0.358790] alloc kstat_irqs on node -1 [ 0.358803] serial 0000:01:05.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 0.358912] 0000:01:05.0: ttyS2 at I/O 0xcc08 (irq = 16) is a 16450 [ 0.358980] 0000:01:05.0: ttyS3 at I/O 0xcc10 (irq = 16) is a 8250 [ 0.359002] Couldn't register serial port 0000:01:05.0: -28 [ 0.360074] brd: module loaded [ 0.360584] loop: module loaded [ 0.360689] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.360905] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.361318] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.361324] alloc irq_desc for 23 on node -1 [ 0.361326] alloc kstat_irqs on node -1 [ 0.361338] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.361354] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.361361] pata_acpi 0000:00:08.0: PCI INT A disabled [ 0.361684] Fixed MDIO Bus: probed [ 0.361719] PPP generic driver version 2.4.2 [ 0.361766] tun: Universal TUN/TAP device driver, 1.6 [ 0.361768] tun: (C) 1999-2004 Max Krasnyansky [ 0.361852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.362184] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.362187] alloc irq_desc for 22 on node -1 [ 0.362189] alloc kstat_irqs on node -1 [ 0.362197] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.362218] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.362222] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.362263] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.362296] ehci_hcd 0000:00:02.1: debug port 1 [ 0.362304] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.362327] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 0.362373] isapnp: Scanning for PnP cards... [ 0.407537] Freeing initrd memory: 8124k freed [ 0.411241] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.411383] usb usb1: configuration #1 chosen from 1 choice [ 0.411424] hub 1-0:1.0: USB hub found [ 0.411439] hub 1-0:1.0: 8 ports detected [ 0.411529] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.411931] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.411935] alloc irq_desc for 21 on node -1 [ 0.411937] alloc kstat_irqs on node -1 [ 0.411946] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 [ 0.411959] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.411962] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.412029] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.412060] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 [ 0.487205] usb usb2: configuration #1 chosen from 1 choice [ 0.487239] hub 2-0:1.0: USB hub found [ 0.487257] hub 2-0:1.0: 8 ports detected [ 0.487330] uhci_hcd: USB Universal Host Controller Interface driver [ 0.487441] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 0.487443] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 0.487867] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.487875] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.487958] mice: PS/2 mouse device common for all mice [ 0.488066] rtc_cmos 00:05: RTC can wake from S4 [ 0.488110] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.488151] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.488256] device-mapper: uevent: version 1.0.3 [ 0.488387] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.488458] device-mapper: multipath: version 1.1.0 loaded [ 0.488461] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.488579] EISA: Probing bus 0 at eisa.0 [ 0.488586] Cannot allocate resource for EISA slot 1 [ 0.488605] EISA: Detected 0 cards. [ 0.488685] cpuidle: using governor ladder [ 0.488688] cpuidle: using governor menu [ 0.489177] TCP cubic registered [ 0.489330] NET: Registered protocol family 10 [ 0.489802] lo: Disabled Privacy Extensions [ 0.490131] NET: Registered protocol family 17 [ 0.490171] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 0.490222] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe [ 0.490224] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10 [ 0.490227] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 0.498877] Using IPI No-Shortcut mode [ 0.498963] PM: Resume from disk failed. [ 0.498978] registered taskstats version 1 [ 0.499270] Magic number: 10:698:816 [ 0.499400] rtc_cmos 00:05: setting system clock to 2010-09-21 03:50:16 UTC (1285041016) [ 0.499404] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.499406] EDD information not available. [ 0.716663] isapnp: No Plug & Play device found [ 0.716690] Freeing unused kernel memory: 660k freed [ 0.717270] Write protecting the kernel text: 4680k [ 0.717309] Write protecting the kernel read-only data: 1844k [ 0.737773] udev: starting version 151 [ 0.855862] sata_nv 0000:00:08.0: version 3.5 [ 0.855882] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.855944] sata_nv 0000:00:08.0: setting latency timer to 64 [ 0.874245] scsi0 : sata_nv [ 0.879335] scsi1 : sata_nv [ 0.879598] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 [ 0.879602] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 [ 0.886211] pata_amd 0000:00:06.0: version 0.4.1 [ 0.886267] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.886390] scsi2 : pata_amd [ 0.886511] scsi3 : pata_amd [ 0.887238] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.887241] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.064294] ata3.00: ATAPI: LITE-ON DVDRW SHW-160P6S, PRS2, max UDMA/66 [ 1.064322] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13) [ 1.064325] ata3.00: limited to UDMA/33 due to 40-wire cable [ 1.096236] ata3.00: configured for UDMA/33 [ 1.168015] usb 2-4: new full speed USB device using ohci_hcd and address 2 [ 1.344032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.352305] ata1.00: ATA-7: Hitachi HDT725025VLA380, V5DOA52A, max UDMA/133 [ 1.352308] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.368329] ata1.00: configured for UDMA/133 [ 1.368469] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5 [ 1.368682] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.368722] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.368813] sd 0:0:0:0: [sda] Write Protect is off [ 1.368816] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.368838] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.368994] sda: sda1 sda2 sda3 sda4 < [ 1.380131] usb 2-4: configuration #1 chosen from 1 choice [ 1.383107] hub 2-4:1.0: USB hub found [ 1.386042] hub 2-4:1.0: 4 ports detected [ 1.398608] sda5 sda6 > [ 1.412068] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.704016] usb 2-8: new full speed USB device using ohci_hcd and address 3 [ 1.836036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.882651] ata2.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 [ 1.882654] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.919121] usb 2-8: configuration #1 chosen from 1 choice [ 1.929155] Initializing USB Mass Storage driver... [ 1.929322] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.929425] usbcore: registered new interface driver usb-storage [ 1.929428] USB Mass Storage support registered. [ 1.929435] usb-storage: device found at 3 [ 1.929437] usb-storage: waiting for device to settle before scanning [ 1.949321] ata2.00: configured for UDMA/133 [ 1.949460] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 1.949640] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.949709] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.949808] sd 1:0:0:0: [sdb] Write Protect is off [ 1.949811] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.949836] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.949998] sdb: [ 1.950535] scsi 2:0:0:0: CD-ROM LITE-ON DVDRW SHW-160P6S PRS2 PQ: 0 ANSI: 5 [ 1.954606] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.954610] Uniform CD-ROM driver Revision: 3.20 [ 1.954726] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.954777] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 1.954870] ata4: port disabled. ignoring. [ 1.988974] sdb1 sdb2 < [ 1.998048] usb 2-4.1: new full speed USB device using ohci_hcd and address 4 [ 2.005903] sdb5 sdb6 > [ 2.022467] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.028447] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 2.028458] alloc irq_desc for 19 on node -1 [ 2.028460] alloc kstat_irqs on node -1 [ 2.028477] ohci1394 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 2.028485] ohci1394 0000:01:09.0: setting latency timer to 64 [ 2.084069] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fd8fe000-fd8fe7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.100041] usb 2-4.1: not running at top speed; connect to a high speed hub [ 2.124210] usb 2-4.1: configuration #1 chosen from 1 choice [ 2.127151] hub 2-4.1:1.0: USB hub found [ 2.130047] hub 2-4.1:1.0: 3 ports detected [ 2.221048] usb 2-4.2: new low speed USB device using ohci_hcd and address 5 [ 2.334255] usb 2-4.2: configuration #1 chosen from 1 choice [ 2.351431] usbcore: registered new interface driver hiddev [ 2.357350] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.2/2-4.2:1.0/input/input3 [ 2.357488] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-4.2/input0 [ 2.357523] usbcore: registered new interface driver usbhid [ 2.357526] usbhid: v2.6:USB HID core driver [ 2.364892] EXT4-fs (sdb5): mounted filesystem with ordered data mode [ 2.413047] usb 2-4.3: new low speed USB device using ohci_hcd and address 6 [ 2.517056] usb 2-4.3: config 1 interface 1 altsetting 0 endpoint 0x2 has an invalid bInterval 0, changing to 32 [ 2.529172] usb 2-4.3: configuration #1 chosen from 1 choice [ 2.552151] input: No brand HA2 1.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.3/2-4.3:1.0/input/input4 [ 2.552237] generic-usb 0003:10D5:000D.0002: input,hidraw1: USB HID v1.10 Keyboard [No brand HA2 1.0] on usb-0000:00:02.0-4.3/input0 [ 2.555058] usbhid 2-4.3:1.1: couldn't find an input interrupt endpoint [ 2.637045] usb 2-4.1.2: new low speed USB device using ohci_hcd and address 7 [ 2.751160] usb 2-4.1.2: configuration #1 chosen from 1 choice [ 3.356231] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00001921ff1c9671] [ 6.930118] usb-storage: device scan complete [ 6.937079] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 6.944064] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 6.951059] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 6.958059] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 6.958573] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 6.958735] sd 4:0:0:1: Attached scsi generic sg4 type 0 [ 6.958891] sd 4:0:0:2: Attached scsi generic sg5 type 0 [ 6.959048] sd 4:0:0:3: Attached scsi generic sg6 type 0 [ 7.002052] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 7.024054] sd 4:0:0:1: [sdd] Attached SCSI removable disk [ 7.035051] sd 4:0:0:2: [sde] Attached SCSI removable disk [ 7.046058] sd 4:0:0:3: [sdf] Attached SCSI removable disk [ 14.000878] udev: starting version 151 [ 14.076911] Adding 3384312k swap on /dev/sdb6. Priority:-1 extents:1 across:3384312k [ 14.148133] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 14.148161] i2c i2c-1: nForce2 SMBus adapter at 0xf400 [ 14.241797] vga16fb: initializing [ 14.241803] vga16fb: mapped to 0xc00a0000 [ 14.241887] fb0: VGA16 VGA frame buffer device [ 14.251211] parport_pc 00:0a: reported by Plug and Play ACPI [ 14.251259] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 14.336332] lp: driver loaded but no devices found [ 14.341314] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 14.343614] Linux agpgart interface v0.103 [ 14.345233] lp0: using parport0 (interrupt-driven). [ 14.353252] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1.2/2-4.1.2:1.0/input/input5 [ 14.353364] apple 0003:05AC:0220.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:02.0-4.1.2/input0 [ 14.362337] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1.2/2-4.1.2:1.1/input/input6 [ 14.362449] apple 0003:05AC:0220.0004: input,hidraw3: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:02.0-4.1.2/input1 [ 14.412184] acer-wmi: Acer Laptop ACPI-WMI Extras [ 14.412197] acer-wmi: No or unsupported WMI interface, unable to load [ 14.509215] nvidia: module license 'NVIDIA' taints kernel. [ 14.509221] Disabling lock debugging due to kernel taint [ 14.753475] type=1505 audit(1285059030.752:2): operation="profile_load" pid=756 name="/sbin/dhclient3" [ 14.753669] type=1505 audit(1285059030.752:3): operation="profile_load" pid=756 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.753751] type=1505 audit(1285059030.752:4): operation="profile_load" pid=756 name="/usr/lib/connman/scripts/dhclient-script" [ 15.625222] ppdev: user-space parallel port driver [ 15.821393] Console: switching to colour frame buffer device 80x30 [ 15.887219] sky2 driver version 1.25 [ 15.887689] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 15.887697] sky2 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 15.887711] sky2 0000:03:00.0: setting latency timer to 64 [ 15.887750] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2 [ 15.887811] alloc irq_desc for 27 on node -1 [ 15.887813] alloc kstat_irqs on node -1 [ 15.887827] sky2 0000:03:00.0: irq 27 for MSI/MSI-X [ 15.889246] sky2 eth0: addr 00:19:21:ef:a6:22 [ 15.927385] udev: renamed network interface eth0 to eth1 [ 16.054367] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 16.054376] alloc irq_desc for 20 on node -1 [ 16.054379] alloc kstat_irqs on node -1 [ 16.054392] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20 [ 16.054397] hda_intel: Disable MSI for Nvidia chipset [ 16.054449] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 16.153040] type=1505 audit(1285059032.152:5): operation="profile_load" pid=804 name="/usr/sbin/ntpd" [ 16.169645] sky2 eth1: enabling interface [ 16.170341] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 16.470023] type=1505 audit(1285059032.468:6): operation="profile_load" pid=1021 name="/usr/share/gdm/guest-session/Xsession" [ 16.472453] type=1505 audit(1285059032.472:7): operation="profile_replace" pid=1027 name="/sbin/dhclient3" [ 16.472751] type=1505 audit(1285059032.472:8): operation="profile_replace" pid=1027 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.472922] type=1505 audit(1285059032.472:9): operation="profile_replace" pid=1027 name="/usr/lib/connman/scripts/dhclient-script" [ 16.668018] hda_codec: ALC888: BIOS auto-probing. [ 17.017218] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input7 [ 17.288861] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23 [ 17.288870] nvidia 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 23 (level, low) -> IRQ 23 [ 17.288879] nvidia 0000:00:0d.0: setting latency timer to 64 [ 17.288884] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 17.289215] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010 [ 17.963091] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both [ 17.969547] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 23.716597] type=1505 audit(1285059039.713:10): operation="profile_load" pid=1028 name="/usr/bin/evince" [ 23.718637] type=1505 audit(1285059039.717:11): operation="profile_load" pid=1028 name="/usr/bin/evince-previewer" [ 23.719888] type=1505 audit(1285059039.717:12): operation="profile_load" pid=1028 name="/usr/bin/evince-thumbnailer" [ 24.067385] type=1505 audit(1285059040.064:13): operation="profile_load" pid=1344 name="/usr/lib/cups/backend/cups-pdf" [ 24.067750] type=1505 audit(1285059040.064:14): operation="profile_load" pid=1344 name="/usr/sbin/cupsd" [ 24.179664] type=1505 audit(1285059040.176:15): operation="profile_load" pid=1345 name="/usr/sbin/mysqld" [ 24.182534] type=1505 audit(1285059040.180:16): operation="profile_replace" pid=1346 name="/usr/sbin/ntpd" [ 24.283199] type=1505 audit(1285059040.280:17): operation="profile_load" pid=1347 name="/usr/sbin/tcpdump" [ 24.451122] type=1505 audit(1285059040.448:18): operation="profile_replace" pid=1459 name="/usr/sbin/mysqld"